ROBAM A671 30-Inch Under Cabinet Range Hood
Installation Dimensions and Technical Specifications
Product Description
This document outlines the installation dimensions and technical details for the ROBAM A671 30-inch under cabinet range hood. The appliance features a modern Onyx Black Glass finish, touchless operation, LED lighting, and Turbo Mode.
A visual representation shows the range hood with a sleek black glass front panel and subtle red indicator lights, mounted above a stainless steel base.
Installation Diagrams and Dimensions
All measurements are provided in inches.
Top - Opening Dimensions
This view details the required cutout dimensions for the top of the cabinet.
- Left cutout: 7" (height) x 1 1/2" (width)
- Right cutout: 9 1/2" (height) x 1 1/2" (width)
- Distance between cutout centers: 8"
- Overall width indicated: 28 3/4"
- Distance from front edge to cutouts: 7"
- Distance from back edge to cutouts: 9 1/2"
Top - Fixing Hole Locations
This view shows the placement for mounting holes on the cabinet top.
- Two mounting holes, each approximately 2" x 1 1/2" with rounded corners.
- Hole centers are spaced 8" apart.
- Left hole: 7" from front edge, 1 1/2" from left side.
- Right hole: 7" from front edge, 1 1/2" from right side.
- Designated "Location for wall power" near the right mounting hole.
- Overall width indicated: 28 3/4"
Front View
This diagram presents the front appearance and dimensions.
- Overall width: 29 3/4"
- Height: 6"
- A horizontal line divides the front panel.
Side View
This diagram illustrates the side profile and features.
- Body height: 6"
- Features a circular "Grease Tray" with a 7" diameter.
- A diagonal line suggests an installation angle.
Back View
This diagram shows the rear of the unit with mounting details.
- Overall width: 29 3/4"
- Height: 6"
- Mounting hole specifications:
- 1 1/4" from top edge to first set of holes.
- 6 1/4" between centers of first and second hole sets.
- 11 1/4" between centers of second and third hole sets.
- Total width covered by holes: 17 1/4"
- Height of cutouts: approximately 1 1/4"
