Samsung Washing Machine User Manual

Safety Information

Please read this manual carefully before operating your washing machine and keep it for future reference. Your safety and the safety of others are very important.

General Safety Precautions

• This appliance is intended for household use only.
• Do not install or operate the appliance in areas exposed to freezing temperatures.
• Ensure the appliance is properly grounded.
• Do not repair or replace any part of the appliance yourself unless specifically recommended in this user manual.
• Keep children away from the appliance during operation.
• Do not overload the washing machine.
• Use only recommended detergents.
• Do not wash items that have been previously cleaned in, washed in, or spotted with flammable or explosive substances (such as gasoline, thinner, kerosene, dry cleaning solvents, etc.).

Electrical Safety

• Ensure the voltage and frequency of the power supply match the specifications on the rating plate.
• Do not use extension cords or adapters.
• Disconnect the power plug before cleaning or maintenance.
• Do not touch the power plug with wet hands.

Installation Safety

• Install the appliance on a stable, level surface.
• Ensure water supply and drain hoses are properly connected and not kinked.
• Do not install the appliance near heat sources or in direct sunlight.

Operation Safety

• Do not open the door during the wash cycle. Wait until the cycle is finished.
• Do not insert hands into the drum while it is rotating.
• Do not attempt to operate the machine if the door does not close properly.

Child Safety

• Keep packaging materials away from children.
• Ensure the child lock feature is activated when necessary.

Installation

Proper installation ensures the safe and efficient operation of your washing machine.

1. Choosing a Location

Install the washing machine on a firm, level floor. Avoid installing it on carpet or uneven surfaces. Ensure there is adequate space around the machine for ventilation and access. Keep it away from direct sunlight and heat sources.

2. Leveling the Machine

The washing machine must be perfectly level to prevent noise and vibration. Adjust the leveling feet by turning them clockwise or counterclockwise until the machine is stable and does not rock.

Diagram Description: An illustration shows the bottom of the washing machine with adjustable feet. Arrows indicate how to turn the feet to adjust the height and level the appliance.

3. Connecting the Water Supply

Connect the water inlet hose to a cold water tap. Ensure the rubber washer is in place at both ends of the hose. Connect the other end of the hose to the water inlet valve on the back of the washing machine.

Diagram Description: An illustration shows a water tap, the inlet hose with a rubber washer at the tap end, and the hose being connected to the water inlet valve on the rear of the washing machine.

4. Connecting the Drain Hose

The drain hose can be routed to a standpipe, a sink drain, or a floor drain. Ensure the end of the drain hose is securely positioned to prevent it from falling out during draining. The height of the drain hose outlet should be between 60 cm and 90 cm from the floor.

Diagram Description: An illustration shows three options for drain hose placement: connected to a standpipe, connected to a sink trap, and draped over the edge of a sink. It also indicates the recommended height range for the drain outlet.

5. Electrical Connection

Plug the power cord into a properly grounded electrical outlet. Ensure the outlet voltage matches the machine's requirements.

Diagram Description: An illustration shows the power plug being inserted into a grounded wall socket.

Operation

Familiarize yourself with the control panel and basic operations.

Control Panel Overview

The control panel features a program selection dial, various buttons for options, and a digital display.

Diagram Description: A diagram of the control panel shows the following key elements:

• Power Button: Turns the machine on/off.
• Program Selection Dial/Buttons: Used to choose wash cycles (e.g., Cotton, Synthetics, Delicates, Wool, Quick Wash).
• Display Screen: Shows selected program, remaining time, error codes, and status indicators.
• Option Buttons: For selecting additional functions like Temperature, Spin Speed, Delay End, Pre-Wash, Intensive.
• Start/Pause Button: Starts or pauses the selected wash cycle.
• Indicator Lights: Show the status of the cycle (e.g., washing, rinsing, spinning, end of cycle).

Detergent Drawer

The detergent drawer has compartments for different types of additives.

Diagram Description: A diagram of the detergent drawer shows three compartments labeled:

• I: Pre-wash detergent.
• II: Main wash detergent.
• : Fabric softener or liquid starch.

Basic Washing Procedure

1. Load laundry into the drum.
2. Add detergent and fabric softener to the appropriate compartments in the detergent drawer.
3. Close the detergent drawer.
4. Press the Power button.
5. Select the desired wash program using the program selection dial or buttons.
6. Adjust options such as temperature and spin speed if necessary.
7. Press the Start/Pause button to begin the wash cycle.

Special Cycles and Options

• Delay End: Allows you to set a time delay for the end of the wash cycle.
• Pre-Wash: Use for heavily soiled items.
• Intensive: For very stubborn stains.
• Child Lock: Press and hold specific buttons (refer to manual) to activate/deactivate. This prevents accidental changes to the program.

Maintenance

Regular maintenance ensures your washing machine operates efficiently and lasts longer.

Cleaning the Exterior

Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.

Cleaning the Detergent Drawer

Pull out the detergent drawer and wash it under running water. Use a small brush to clean any residue. Ensure it is dry before reinserting.

Diagram Description: An illustration shows the detergent drawer being pulled out and rinsed under a tap. A small brush is shown cleaning the compartments.

Cleaning the Drum

Periodically run a drum cleaning cycle or a hot wash cycle (e.g., 90°C) with an empty drum to prevent odor buildup and remove residue.

Cleaning the Drain Filter

The drain filter collects lint and small objects. Clean it regularly (e.g., every 1-2 months) or when an error code indicates a blockage.

Diagram Description: An illustration shows the location of the drain filter, typically at the bottom front of the machine behind a small access panel. It shows the steps:

• Open the access panel.
• Place a shallow container and towels under the filter to catch water.
• Pull out the emergency drain tube (if present) and drain residual water.
• Unscrew the drain filter counterclockwise.
• Remove the filter, clean it under running water, and remove any debris.
• Screw the filter back in clockwise and close the access panel.

Cleaning the Water Inlet Filter

The water inlet filter prevents impurities from entering the machine. Clean it if the water supply is slow or the machine does not fill properly.

Diagram Description: An illustration shows the rear of the washing machine where the water inlet hose connects. It depicts unscrewing the hose, locating the filter screen inside the inlet valve, and cleaning it with a brush or cloth.

Troubleshooting

If you encounter a problem, check the following before calling for service.

Specifications

Key specifications for the Samsung Washing Machine WA10BG4686BR.

Additional Information

Energy Saving Tips

• Wash full loads whenever possible.
• Use lower temperature settings for lightly soiled laundry.
• Select the appropriate spin speed to reduce drying time.

Environmental Protection

This appliance is designed to minimize environmental impact. Please dispose of it responsibly at the end of its life cycle.

Appendix

Error Codes

The following table lists common error codes and their meanings: