Oben | Tripods, Monopods & Tripod Accessories
User Manual for Oben models including: Tripod Vlogging Kit, Tripod With Ring Light, TTVLK-8
Please read and follow these instructions, and keep this manual in a safe place. Keep this unit away from water and any flammable gases or liquids. INTRODUCTION. LED array C 1/4-20 mounting socket Ring Light A USB cable Connect to a computer ... 3/24/2021 5:36:15 PM ...
Please read and follow these instructions, and keep this manual in a safe place. Keep this unit away from water and any ... 3/24/2021 5:36:15 PM ...
Please read and follow these instructions, and keep this manual in a safe place. ... is a registered trademark of the Gradus Group. © 2021 Gradus Group LLC.
File Info : application/pdf, 10 Pages, 7.45MB
DocumentDocumentTTVLK-8 Tripod Vlogging Kit with 8 in. Ring Light You're on steady ground® INTRODUCTION Thank you for choosing Oben. The Oben TTVLK Tripod Vlogging Kit features a desktop tripod, accessory arm, USB-powered LED ring light, and a smartphone clamp. It puts the tools you need to set up a vlog or video meeting anywhere. Warnings ! Warnings: · Please read and follow these instructions, and keep this manual in a safe place. · Keep this unit away from water and any flammable gases or liquids. · Do not stare directly at the lights when they are powered on. · Clean the unit with a soft, dry cloth. · Keep this unit away from children. · Make sure the item is intact and that there are no missing parts. · All images are for illustrative purposes only. OVERVIEW A B Ring Light A LED array C C 1/4-20 mounting socket B USB cable Connect to a computer or USB plug adapter. OVERVIEW E D F G H Ballhead D 1/4-20 screw Attach to smartphone adapter. G 1/4-20 accessory socket Attach the accessory arm. E Locking knob Loosen to adjust the angle. Tighten to secure. H 1/4-20 socket Screw onto the tabletop tripod. F 90° notch Switch from horizontal to vertical camera orientation. OVERVIEW I J K Accessory Arm I 1/4-20 screw J Thumbscrews D K 1/4-20 locking nut Attach to the tripod accessory socket. Important! For secure support of the ring light, make sure the accessory arm is positioned directly over one of the legs. OVERVIEW L M Tripod L 1/4-20 screw Attach the ballhead. M Leg release button Press to spread the legs to the maximum base. Close the legs to use the tripod as a handheld grip. Important! Set the tripod to its widest base when the ring light is attached. OVERVIEW N P O Controller N Color temperature P Brightness Select cool, warm, or neutral color temperature settings. Press repeatedly to increase or decrease the 10-step brightness. O Power button Press to turn the light on or off. OVERVIEW Q R Smartphone Adapter Q Smartphone clamp Fits phones 2.4 to 3.5 inches wide. R 1/4-20 sockets Attach to the ballhead. SPECIFICATIONS Specifications Input Power Connector Color Temperature Brightness Smartphone Compatibility Cable Length Dimensions Load Capacity 5 V USB Standard-A 3 step (cool, warm, neutral) 10 step 2.4 to 3.5 in. (6.1 to 8.9 cm) 6.3 ft. (2 m) Height: 3.9 in. (9.9 cm) min 6.9 in. (17.5 cm) max Ring Light Diameter: 8 in. (20.3 cm) Depth: 1 in. (2.5 cm) Accessory Arm Length: 10.5 in. (26.7 cm) Ballhead Height: 2.1 in. (5.3 cm) 2.2 lb. (1 kg) www.obensupports.com GG1 Oben is a registered trademark of the Gradus Group. © 2021 Gradus Group LLC. All Rights Reserved.