Intelli-Time® Alarm Clock
Model: 13027W
Features
The Intelli-Time alarm clock automatically displays the correct time upon being plugged in. The default time zone is Atlantic Standard Time (AST). To set your local time, simply slide the time zone switch located on the bottom of the clock to your desired time zone.
To Set DST (Daylight Savings Time)
To set the DST function (On/Off), press the DST button once. Then, use the (+) or (-) button to toggle DST On (display shows "doN") or Off (display shows "doF"). The clock will automatically update for DST once the function is enabled.
- DST starts: First Sunday in April at 2 AM.
- DST ends: Last Sunday in October at 2 AM.
To Set Time Zone
Slide the TIME ZONE switch, located on the bottom of the clock, to your desired time zone. To view the current time zone status on the display, press the DST button twice. A time zone code number will appear on the right side of the display.
Time Zone Codes:
- 0 = Atlantic Standard Time (AST)
- 1 = East Standard Time (EST)
- 2 = Central Standard Time (CST)
- 3 = Mountain Standard Time (MST)
- 4 = Pacific Standard Time (PST)
- 5 = Alaska Time (137-141 lat) (AKST 1)
- 6 = Aleutian, Alaska Time (141-162 lat) (AKST 2)
- Hawaii-Aleutian (HAST)
To Set the Alarm
- Press the ALARM button once.
- Use the (+) or (-) button to set the desired hour. Ensure the AM/PM time is set correctly.
- Press the ALARM button again to set the minutes.
- Use the (+) or (-) button to set the desired minutes.
Snooze
Press the SNOOZE bar to activate a 10-minute sleep delay. This can be repeated up to four times.
To Operate Alarm
Slide the ALARM ON/OFF switch to the ON position. The alarm will sound at the pre-set time. To reset the alarm for the next day, momentarily press the ALARM button. To shut off the alarm completely, slide the ALARM ON/OFF switch to the OFF position.
To Manually Reset the Time
If you wish to set the clock ahead or if the clock loses time, follow these steps:
- Press and hold the DST button for 5 seconds to enter set mode. The hour will flash.
- Press (+) or (-) to set the hour.
- Press and release the DST button to confirm and move to minutes.
- Press (+) or (-) to set the minutes.
- Press and release the DST button to confirm. Repeat for month, date, and year.
Dimmer Display
Slide the DIM HI/LO switch to adjust the display brightness.
Backup Battery Replacement
This clock has 4 pre-installed AG13/LR44 backup batteries. It is recommended to replace these batteries at least once every five years to ensure the clock keeps correct time when not plugged in. The backup battery will keep the correct time for 1.5 years without the display showing.
To Read the Date and Year
Press the (+) or (-) button to cycle through time, date, and year displays. Pressing once shows Month & Date; pressing twice shows the Year (e.g., "y03" indicates the year 2003).
DST Setting Information
The clock has an OLD/NEW DST switch for compatibility with different DST schedules.
- NEW DST (2007 and beyond): Automatically changes at 2:00 AM on the 2nd Sunday in March and 2:00 AM on the 1st Sunday in November.
- OLD DST (2006): Automatically changes at 2:00 AM on the 1st Sunday in April and 2:00 AM on the last Sunday in October.
- OFF: No DST changes.
Note: If you live in an area that does not observe Daylight Saving Time, turn the DST function OFF.
Important Safety Information
CAUTION: To prevent electric shock, do not use the polarized plug with an extension cord, receptacle, or other outlet unless blades can be fully inserted to prevent blade exposure.
WARNING: To prevent fire or shock hazard, do not expose the unit to rain or moisture.
CAUTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN. Refer servicing to qualified personnel.
Limited Warranty - International
Chaney Instrument Company warrants this product to be free from defects in material and workmanship for one year from the date of purchase. Chaney Instrument's obligation is limited to repair or replacement of the product at its option. For in-warranty repair, send the clock with a guarantee bearing the dealer's name and date of purchase, along with $5.00 for handling and postage, to:
Chaney Instrument Company
965 Wells Street
Lake Geneva, Wisconsin 53147
Website: www.chaneyinstrument.com
Tel: 877-221-1252
Made in China
Technical Assistance
For technical assistance and product return information, please call Chaney Instrument Co. direct at 877-221-1252.