Pure & Easy Gazebo Assembly Instructions

Important Notice

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Assembly Surface: Assemble on a flat and solid surface. This is crucial to avoid the unstable surface affecting the overall frame stability during installation.

Professional Installation: Professional installation is highly recommended.

Component Check: Periodically check that all components are tightly secured.

Assembly Assistance: It is recommended that multiple people assemble this product.

Missing Parts: If parts of your furniture are missing, please contact support. [contact icon]

Required Auxiliary Tools: Please have the following tools ready:

• [drill]
• [hammer]
• [wrench]
• [tape measure]
• [ladder]
• [safety helmet]

Safety Warnings

WARNING:

• Must use ground nails, ropes, and expansion screws for whichever ground you install on for stability to avoid devastating injuries for people inside or nearby and property damage caused by a collapsing gazebo.
• Do not use this gazebo in high winds, heavy snow, or inclement weather. It is not designed to withstand strong gusts of wind, heavy snow accumulation, or other inclement weather. Take precautions when the wind speed exceeds 25 mph, and clear snow when it accumulates more than 2 inches.
• Before use, thoroughly inspect the gazebo to make sure all bolts, nuts, and buckles have been completely tightened and securely fastened.
• Warranty does not cover damages, losses, or injuries resulting from improper installation, misuse, not using stability accessories mentioned above, non-snow cleaning, or failure to take precautionary measures.

Installation Methods

The following installation methods will provide better wind resistance performance, extend the product's lifespan, and help you maximize its value, delivering an even better user experience.

Method 1 (Hardwood Deck): If the deck you are installing is made of hardwood and has a depth exceeding 40mm, you can use ST8*35mm screws to secure it in place. (This hardware is not included with the product, so you will need to purchase it separately.)

Method 2 (Concrete Surface): The best option is to fix it on a concrete surface. You can use the expansion bolts that are pre-configured with the product to secure it in place.

Parts List

Assembly Steps

Step 1: Assemble Base

Parts: A (4pcs), J (1pc); Hardware: 1 (12pcs)

Attach vertical support poles (A) to the base plates (J) using screws (1). Ensure the poles are securely fastened to the base.

Step 2: Connect Top Rails

Parts: B (4pcs), B1 (4pcs), P (4pcs); Hardware: 1 (32pcs)

Connect horizontal top rails (B and B1) using connecting plates (P). Ensure the holes on part P face upwards. Do not install upside down.

Step 3: Assemble Frame

Parts: A (4pcs), B (4pcs), B1 (4pcs); Hardware: 1 (16pcs), 8 (16pcs)

Connect the vertical support poles (A) to the horizontal top rails (B, B1) using screws (1) and (8). This forms the main frame of the gazebo.

Step 4: Attach Corner Braces

Parts: A (4pcs), H (4pcs), H1 (4pcs); Hardware: 1 (16pcs)

Attach corner support braces (H, H1) to the vertical support poles (A) using screws (1). These braces add stability to the corners of the structure.

Step 5: Attach Sliding Tracks

Parts: B (4pcs), B1 (4pcs); Hardware: U (96pcs)

Attach sliding track components (V) to the horizontal top rails (B, B1). Then, attach hooks/clips (U) to these tracks. The diagram shows 6 hooks/clips per section of B/B1.

Step 6: Install Roof Rafters

Parts: K (4pcs), K1 (4pcs); Hardware: 4 (24pcs), V (4pcs), 10 (4pcs)

Install the outer roof rafters (K) and inner roof rafters (K1). Use screws (4), component V, and screws (10) as shown in the diagrams. The diagrams show V and 10 connecting K1 to the main frame, and 4 connecting K to K1.

Step 7: Assemble Central Roof Hub

Parts: E (4pcs), W3 (4pcs); Hardware: 10 (8pcs), L (1pc), 15 (1pc)

Attach roof support beams (E) to the central roof hub (L) using screws (10). Also attach connector pieces (W3) and cord/strap (15).

Step 8: Attach Roof Beams to Frame

Parts: E (4pcs), A (4pcs); Hardware: 1 (12pcs)

Attach the assembled roof support beams (E) to the vertical support poles (A) using screws (1). This forms the main roof structure.

Step 9: Attach Inner Roof Beams

Parts: E1 (4pcs), W2 (4pcs); Hardware: 10 (8pcs)

Attach inner roof support beams (E1) to the frame using connector pieces (W2) and screws (10).

Step 10: Secure Inner Roof Beams

Parts: E1 (4pcs); Hardware: 1 (12pcs)

Secure the inner roof support beams (E1) to the frame using screws (1). This completes the roof structure.

Step 11: Install Roof Finial

Parts: M (1pc), L (1pc); Hardware: 3 (1pc)

Attach the roof finial/cap (M) to the central roof hub (L) using screw (3).

Step 12: Attach Roof Panel Edges

Parts: Q1-Q6 (4pcs each), F1-F4 (4pcs each); Hardware: None specified, implied connection.

Attach the roof panel edge trims (Q1-Q6) to the roof panels (F1-F4). The diagrams show how these trims fit onto the panels.

Step 13: Install Roof Panels

Parts: E (4pcs), E1 (4pcs), Q1-Q6 (various), F1-F4 (various); Hardware: None specified, implied connection.

Install the roof panels (F1-F4 with their trims Q1-Q6) onto the roof support beams (E, E1). The diagrams show the arrangement and connection points.

Step 14: Attach Support Brackets

Parts: E (4pcs), G1 (4pcs), G2 (4pcs), E1 (4pcs); Hardware: N (4pcs), N1 (4pcs), 1 (8pcs)

Attach support brackets (N, N1) to the frame using screws (1). Connect G1 and G2 brackets to the frame and E/E1 beams using screws (N, N1, 1).

Step 15: Prepare Sidewall Curtains

Parts: T (4pcs); Hardware: None specified, implied use of U hooks.

Prepare the sidewall curtains (T). Each curtain consists of two parts, with 6 holes each for hanging on parts B and B1.

Step 16: Hang Sidewall Curtains

Parts: T (4pcs); Hardware: U (96pcs)

Hang the sidewall curtains (T) onto the frame using the hooks/clips (U). Pay attention to the sidewall curtain's installation position.

Step 17: Prepare Sidewall Netting

Parts: T1 (4pcs); Hardware: None specified, implied use of U hooks.

Prepare the sidewall netting (T1). Similar to curtains, each netting piece has 6 holes for hanging on parts B and B1.

Step 18: Hang Sidewall Netting

Parts: T1 (4pcs); Hardware: U (96pcs)

Hang the sidewall netting (T1) onto the frame using hooks/clips (U). Hang the hook attached to the netting on Part A. Note: Attach hardware 1 to 2 to secure parts T1 and T together. Attach 1 to 3 to secure the back curtain (T). Attach 1 to 3 to secure the front netting (T1).

Step 19: Final Stability Checks and Anchoring

Parts: A (4pcs), J (4pcs); Hardware: 9 (12pcs), 14 (12pcs)

Important: The product must be installed on a solid base, such as cement or a floor, to prevent damage from strong winds and potential property or health risks. Use screws (9) for cement surfaces and ground anchor stakes (14) for grassy surfaces. If the product cannot be securely fixed, detach and store it properly before heavy winds occur. The manufacturer is not liable for any losses or damages if these instructions and recommendations are not followed.

Step 20: Installation Complete

Installation Completed

Help Center

If you encounter any difficulties during assembly, please contact us.

• Inquiry [question mark icon]
• Assembly issue [person icon]
• Missing parts [cross mark icon]

Disclaimer

Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.