Hohem - AI Tracking Smartphone Gimbal Stabilizer
User Manual for hohem models including: V2S iSteady V2S Smartphone Gimbal with AI Sensor, V2S, iSteady V2S Smartphone Gimbal with AI Sensor, Smartphone Gimbal with AI Sensor, Gimbal with AI Sensor, AI Sensor
Hohem iSteady V2S smartphone gimbal with AI sensor | MOJOGEAR
Hohem iSteady V2S smartphone gimbal met AI-sensor | MOJOGEAR
File Info : application/pdf, 12 Pages, 869.74KB
DocumentDocumentFoldable 3-Axis AI Tracking Smartphone Gimbal User Manual V1.0 Scan the QR code to access the tutorial Warning & Disclaimer Thank you for purchasing the Hohem product. By using this product, you hereby signify that you have read this disclaimer and warning carefully. In addition, you understand and agree to abide by the terms and conditions herein. You acknowledge that you are solely responsible for your own conduct while interacting with this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all applicable laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines Hohem has made and may make available. Hohem accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in this document. This document and all other collateral documents are subject to change at the sole discretion of Hohem. For up-to-date product information, visit www.hohem.com and click on the product page for this product. Hohem Technology Co., Ltd Email service@hohem.com Website www.hohem.com Manufacturer Hohem Technology Co., Ltd Connect us at Facebook Items marked "*" are optional accessories which are sold separately. Mount your mobile phone before powering on iSteady V2S. If no mobile phone is detected or the motor is overloaded because phone is not balanced well, the gimbal will shut down after a warning beeping. iSteady V2S Overview AI Vision Sensor & LED Video Light Power Button AI Vision Indicator AI Vision Sensor LED Video Light Phone Clamp Folding Lock A Folding Lock B Working Mode Indicator (Battery Indicator) Zoom Slider Shutter Button Tilt Motor Knob Pan Motor Bluetooth Light Joystick Function Button Roll Motor M Button (Power On/Off) Charging Port (Type C) Handle (Battery built-in) Lanyard Hole 1/4 inch Screw Port 01 Battery and Charging Please fully charge the iSteady V2S before using it for the first time. Charging Method: To charge the iSteady V2S, connect a USB adapter (not included, choose 5V-2A for better results) into the charging port with the provided USB-C charging cable. USB adapter 5V-2A *NOT included in the package Type A-Type C charging cable Mount & Balance Mobile Phone on the Gimbal? Expand the gimbal Tighten the knob by turning it clockwise. The gimbal would not function properly if the knob was not tightened. Make sure that the Slide the phone camera is on the phone and left side of the clamp. keep it clamped Insert your mobile and balanced device by putting it stuck centrally before in the bottom of phone powering on. clamp and pulling the top side of the clamp to clip it into place. Ensure your phone is centrally clamped to the rubber pads, otherwise the gimbal would vibrate or turn off automatically. Booting up iSteady V2S Long press M button for 3 seconds to power on 02 AI Visual Tracking & LED Video Light Before operation, ensure that the gimbal is powered on. AI Tracking Press the button on the top to power on the AI Vision Sensor (Press it for 3s to power it off). The red indicator LED light and double-flashed LED video light mean that the AI Sensor is on. (AI Smart Tracking starts after an OK gesture) Gesture Control (Note: The best distance of gesture control is between 0.5 and 1.5 meters (1.6 - 5 ft). Make sure that both gesture and face are shown in front of AI sensor within this range.) Start smart tracking: Take an OK gesture towards the AI vision sensor and the AI indicator turns green. Turn off smart tracking: Show a palm gesture towards the AI vision sensor and AI vision indicator turns red. Switch between landscape and portrait mode: Portrait mode: Two thumbs right Landscape mode: Two thumbs up LED Video Light (make sure that AI vision sensor is on) Press once the button to turn on the light and adjust the light intensity. LED turns according to low-mediumhigh-close modes. FAQ: How to make AI vision positioning adjustments? (Customized Composition) Scan the QR code for tutorial of customized composition If the framed subject cannot be centered on the phone screen, or you want to customize the AI vision position to be tracked: 1. Make sure the gimbal & AI vision sensors are on. 2. Take the gesture " " towards the AI vision sensor and and the indicator light will quickly blink in green color. 3. Move in front of the screen until you find the preferred position to be tracked. 4. Show the gesture " "to lock the position and create the ideal composition (the indicator light will stop flashing). 03 Button Function M Button(Power Button) Press and hold for 3s: Power on/off Press once: Switch between working modes (PTF-PF-L-POV) Press twice: Standby mode (Press M button to exit) Press five times: Auto calibration Joystick Up/DownTilt rotation control Left/RightPan rotation control (It is able to control the roll rotation through "Left/Right Joystick" Setting in Hohem Joy App) *Before pressing Zoom Slider and Shutter Button, please make sure that the Bluetooth is connected. Follow steps below: 1.Turn on the Bluetooth of your mobile device. 2.Search for devices and tap on the device name starting with "V2S". 3.It is connected when the Bluetooth indicator shows green. Zoom Slider (Make sure that Bluetooth is already connected.Only Available in the Hohem Joy and Android 10.0 or later.) Push up: Zoom in Push down: Zoom out Shutter Button (Please ensure the Bluetooth pairing) Press once: Take photo, Start/End video Press twice: PHOTO/VIDEO switch Press three times: Front/Rear camera switch (Make sure that Bluetooth is already connected.Only Available in the Hohem Joy and Android 10.0 or later.) Function Button Press once: Landscape mode/Portrait mode Press twice: Recenter the gimbal Press three times: 180° inception mode/ 180° spin shot (auto rotation) Press seven times: Remote control* pairing When paired with a remote control* Press function button once: Cancel pairing Press function button twice: Clear the paired remote control* (The paired remote control will be unavailable and needs to be re-paired.) Press on function button: Check the gimbal battery level (Remote control is sold separately.) 04 Working Mode & Follow Speed Working Mode Scan the QR code to view how to use working modes. To switch between working modes, please press the M button once. Pan Follow When you rotate the handle left/right, the camera will follow the handle movements. The tilt motor does not follow within the angle range of -45° ~+45° movement, if exceed this range, the gimbal will follow the tilt movement, and the roll motor is locked without following the movement. Pan&Tilt Follow This is the default working mode. When you rotate the handle left/right/tilt up/tilt down, the camera will follow the handle movements, and the roll motor is locked without following the movement. All Lock The roll and pan motors are locked without following the movement. The tilt motor does not follow within the angle range of -45° ~+45° movement, if exceed this range, the gimbal will follow the tilt movement. POV (All Follow) First person view 360° following movement(Pan/Tilt/Roll) 05 Follow Speed For changing follow speed, please launch Hohem Joy App - Start Recording Gimbal Parameter Settings (Bluetooth connection is necessary.) General Shooting with general follow speed Slow To follow the slow movement Medium To follow the fast movement Fast Fast follow speed for video transition How to fold iSteady V2S? Fold the gimbal as shown in the image. 06 How to calibrate iSteady V2S? If the gimbal is not level after turning on, or the pan axis is slight drift when the gimbal is still, please calibrate it. Calibrate the gimbal on a flat surface and keep it stationary. Turn on the gimbal and press function button five times. Start calibration after a beep sound. Alternating flashes of the first two battery lights and the last two battery lights. The calibration is done Working mode indicator (Battery indicator) after two beeps sound. The calibration takes about 40 seconds Calibrate the gimbal on a flat surface and keep it stationary. Battery Level Indicator & Bluetooth Indicator Working mode indicator(Battery level indicator) Gimbal mode: If one of working modes is in use, its mode light will be in solid green. Battery level: Long pressing Function Button to check out battery level. Charging status: Light flashing means gimbal in charge, Light staying on means gimbal is fully charged. Others: Continous flashing when calibrating the gimbal. Bluetooth indicator a. Gimbal status Light off: Bluetooth disconnected Green: Bluetooth connected Pulse red: Low battery warning Blink red quickly: Low-battery shutdown countdown Solid red: Error warning Flashing red with beep sound: Overloading b. Remote control* status Blink yellow and green alternatively: Pairing Blink yellow: Paired *Remote control is sold separately. 07 Download Hohem Joy App ----To Find More Many Functions Scan the QR code or search "Hohem Joy" in App Store or Google Play to download. * The App Hohem Joy requires iOS 10.0 or later, and Android 6.0 or later. Gimbal Specifications Product Name iSteady V2S Foldable 3-Axis AI Tracking Smartphone Gimbal Product Model iSV2S Weight 263g Folded Size 179 X 79 X 39 mm Battery Capacity 18650li-ion 2800mAh Battery Life 9 hours 4 hours (with AI vision sensor) 2 hours (with AI vision sensor & LED video light) Mechanical Range Pan: 320° Roll: 320° Tilt: 320° Controllable Range Pan: 320° Tilt: -45° ~+45° Compatible Phones Weight: 280g Thickness: 11mm Width: 55mm~90mm The motor would be shown on the screen due to some of mobile cameras are designed at the middle of phone, such as Xiaomi Mi 10, Xiaomi Mi 10 Pro, and Xiaomi Mi CC9 PRO. 08 Warranty Terms 1. Customers are entitled to replacement service in case of quality deficits or functional disorder found in the product within 7 days upon the purchase date. Ensure the commodity and package with no damage, and we will offer a brand new replacement after confirming the product's problem is not related to artificial damage. 2. The warranty service is subject to normal use. 3. The valid warranty period is 12 months counting from the date of selling under normal use. Accessories are excluded from the warranty service. 4. This warranty service DOES NOT cover accidental or artificial damages (including but not limited to) caused by unauthorized modification, disassembly, incorrect use and operation. 5. Please keep and offer the warranty card for claiming the warranty service. CALL CENTER -Toll Free UNITED STATES: +1(888)9658512 Mon-Fri: 9:00AM-5:00PM(EST) UNITED KINGDOM: +44(0)808 2737578 Mon-Fri: 2:00PM-10:00PM(GMT +0) CANADA: +1(855)758-8939 Mon-Fri: 9:00AM-5:00PM(EST) BRAZIL: +55 (0)800 5911897 Mon-Fri: 10:00AM-6:00PM(GMT -3) Warranty Card User Name Contact No. Address Purchase Date Prod. Serial No. Failure Cause Service Record 09 Scan the QR code to access the tutorial