Shelly Wave Plug US - User and Safety Guide
Read Before Use
This document contains important technical and safety information about the Device, its safe use and installation.
Safety Precautions
⚠️ CAUTION! Before beginning the installation, please read carefully and entirely this guide and any other documents accompanying the Device. Failure to follow the installation procedures could lead to malfunction, danger to your health and life, violation of law or refusal of legal and/or commercial guarantee (if any). Shelly Europe Ltd. is not responsible for any loss or damage in case of incorrect installation or improper operation of this Device due to failure of following the user and safety instructions in this guide.
⚠️ CAUTION! Use the Device only with a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device may damage it.
⚠️ CAUTION! Do not connect the Device to appliances exceeding the given max. load!
⚠️ CAUTION! Connect the Device only in the way shown in these instructions. Any other method could cause damage and/or injury.
⚠️ CAUTION! Do not install the Device where it can get wet.
⚠️ CAUTION! Do not use the Device if it has been damaged!
⚠️ CAUTION! Do not attempt to service or repair the Device yourself!
⚠️ CAUTION! Do not allow children to play with the Device, especially with the S button. Keep the devices for remote control of Shelly Wave (mobile phones, tablets, PCs) away from children.
⚠️ CAUTION! The product is intended for indoor use only.
⚠️ CAUTION! Protect the product from dirt and moisture! Do not use the product in a damp environment!
About the Device
The Device is a smart plug/outlet with power measurement and overheating protection, which allows remote control of electric appliances with a mobile phone, tablet, PC, or home automation system.
Device Identification
The device is identified by the following parts:
- A: Plug
- B: S button
- C: Socket
- D: LED indicator
For detailed installation instructions, visit: https://shelly.link/ShellyWavePlugUS_LR-KB
Technical Specifications
| Power supply | 110 V AC ±10% 60 Hz |
| Power consumption | < 0.3 W |
| Power measurement (W) | Yes |
| Max switching voltage AC | 140 V |
| Max switching current AC | 15 A |
| Overheating protection | Yes |
| Overcurrent protection | Yes |
| Overvoltage protection | Yes |
| Wireless protocol | Z-Wave |
| CPU | S800 |
| Z-Wave® Mesh distance | Up to 40 m indoors (131 ft.) (depends on local condition) |
| Z-Wave® Mesh frequency band | 908.4 MHz |
| Z-Wave® Long range distance | Up to 80 m indoors (262 ft.) or up to 1000 m outdoors (3281 ft.) |
| Z-Wave® Long range frequency band | 912 MHz |
| Z-Wave® repeater | No (Long Range), Yes (Mesh) |
| Size (H x W x D) | 38 x 84 x 52 ±0.5 mm / 1.5 x 3.3 x 2.0 in ±0.02 in |
| Weight | 70 ±1 g / 2.47 ±0.04 oz |
| Compatible sockets | NEMA 5-15 (Type-B) |
| Compatible plugs | NEMA 1-15 (Type-A) and NEMA 5-15 (Type-B) |
| Shell material | Plastic |
| Color | White |
| Ambient working temperature | -20°C to 40°C / -5°F to 105°F |
| Humidity | 30% to 70% RH |
| Max. altitude | 2000 m / 6562 ft. |
Important Disclaimer
Z-Wave® wireless communication may not always be 100% reliable. This Device should not be used in situations in which life and/or valuables are solely dependent on its functioning. If the Device is not recognized by your gateway or appears incorrectly, you may need to change the Device type manually and ensure that your gateway supports Z-Wave Plus® multi-channel devices and Z-Wave® Long Range capability in case of Long Range devices.
Disposal & Recycling
This refers to the waste of electrical and electronic equipment. It is applicable in the US and other countries to collect waste separately.
This symbol ♻️ on the product or in the accompanying literature indicates that the product should not be disposed of in the daily waste. Shelly Wave Plug US must be recycled to avoid possible damage to the environment or human health from uncontrolled waste disposal and to promote the reuse of materials and resources. It is your responsibility to dispose of the device separately from general household waste when it is already unusable.
FCC Notes
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification or change to this equipment. Such modifications or change could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Manufacturer Information
Ordering Code: QLPL-001X16US
FCC ID: 2BDC6-WAVEPLUGUS
Manufacturer: Shelly Europe Ltd.
Address: Shelly Europe Ltd, 51 Cherni Vrah Blvd., building 3, floor 2 and 3, Lozenetz Region, Sofia 1407, Republic of Bulgaria
Tel: +359 2 988 7435
Email: zwave-shelly@shelly.cloud
Support: https://support.shelly.cloud/
Changes in the contact data are published by the Manufacturer at the official website: https://www.shelly.com
