Danfoss EKA 163A / 164A Instructions

Product Description

EKA 163A Universal Display

The EKA 163A is a universal display unit. Part number: 084B8562.

Physical dimensions indicate a front panel cutout of 71 mm x 29 mm, with a minimum installation depth of 15 mm.

EKA 164A Universal Setting Display

The EKA 164A is a universal setting display unit. Part number: 084B8563.

Physical dimensions indicate a front panel cutout of 71 mm x 29 mm, with a minimum installation depth of 15 mm.

Operating Conditions

Operating temperature range: 0 to +55°C (non-condensing).

Operating temperature range: -20 to +55°C (non-condensing).

Connectivity Examples

EKA 163A / EKA 164A to EKC 4xx / EKC 5xx / AK.. Controllers

Connection between EKA 163A/164A and EKC 4xx / EKC 5xx / AK.. controllers.

Maximum cable length: 15 meters.

Connection cables are available in 2m (Part number: 084B7298) and 6m (Part number: 084B7299) lengths.

Wire color coding: Brown, Green, White.

EKA 163A to EKC 202D / 204A1, AK-CC 210 / 260

Connection between EKA 163A and EKC 202D/204A1, AK-CC 210/260 controllers.

Maximum cable length: 1000 meters.

Address setting: Must be greater than 0 (e.g., 003 > 0).

Internal termination is required for the data communication line.

Data communication: Refer to RC8AC literature.

Connection terminals for EKC 202D, EKC 204A1, AK-CC 210 are typically labeled 18, 19, 20, 21, 22, 23, 24, with specific terminals for A, B, and 12V power.

EKA 163A/164A to AK-CC 450 / 550

Connection between EKA 163A/164A and AK-CC 450/550 controllers.

Maximum cable length: 1000 meters.

Address setting: Must be greater than 0 (e.g., 003 > 0).

Internal termination is required for the data communication line.

Data communication: Refer to RC8AC literature.

Connection terminals for AK-CC 450/550 are typically labeled 54, 55, 56, 57, 58, with specific terminals for A+, B-, and 12V power.

EKA 164A to EKD 316

Connection between EKA 164A and EKD 316 controller.

Maximum cable length: 1000 meters.

Address setting: Must be greater than 0 (e.g., 003 > 0).

Internal termination is required for the data communication line.

Data communication: Refer to RC8AC literature.

Connection terminals for EKD 316 are typically labeled 9, 10, 11, 12, 13, with specific terminals for A+, B-, and 12V power. A 120 Ω resistor is indicated for termination.

Product Disposal

The product contains electrical components and must not be disposed of with domestic waste. Equipment must be collected separately as Electrical and Electronic waste, according to local and currently valid legislation.

[CE certified]

Product line: ADAP-KOOL®