Owner's Manual for Trader models including: PUPP1G, PUPP151G, PUPP201G, PUPPSW1G, PUPPV1G, PUPP1GL, PUPP1G Power Point Switched, PUPP1G, Power Point Switched, Point Switched, Switched


File Info : application/pdf, 1 Pages, 1.41MB

PDF preview unavailable. Download the PDF instead.

Puma PUPPSW1GCO
PUPP1G PUPP151G PUPP201G PUPPSW1G PUPPV1G PUPP1GL
*See current catalogue for further detail

Puma Range of Single Power Points
· Uses brass tunnel terminals that have the screws backed out for easier installation of cabling. Power point terminals have 5.7mm bore to suit 4 x 2.5mm2 cable.
· Fits standard Australian wall boxes and mounting accessories that use 84mm mounting centres.
· Covers, plates and dollies are made from UV stabilised polycarbonate to avoid discolouring to yellow.
· Standard colour is white. Black also stocked - please check availability. · Switches approved to AS/NZS3133. · Power points approved to AS/NZS3112. · Typical example of size seen below:

117

Cleaning Guide: Spraying cleaning products directly on to electrical switches or power points (sockets) is not recommended. It is important to ensure that switches are turned off before cleaning. Do not use any cleaning sprays - only wipe down with damp cloth or rub with dry cloth. Do not use an abrasive cloth as it may scratch the plastic. Do not use harsh chemical cleaners as these can break down the plastic and cause it to crack. Do not wash the cover plates in water over 60°C.
1

76

13

28

Catalogue Number PUPP1G PUPP151G PUPP201G
PUPPSW1G
PUPPV1G PUPP1GL

Description
Power Point Switched 1 Gang 10A 250V~ Power Point Switched 1 Gang 15A 250V~ Power Point Switched 1 Gang 20A 250V~ Power Point Switched 1 Gang 10A 250V~ With Extra Switch, 10AX/16A Power Point Switched Vertical 1 Gang 10A 250V~ Power Point Switched 1 Gang 10A 250V~ with Lighting Pin

When ordering BLACK product add "BK" at end of catalogue number, ie PUPP1GBK When ordering BRUSHED ALUMINIUM (cover) add "CBA" at end of catalogue number, ie PUPP1GCBA When ordering REPLACEMENT "COVERS ONLY" add "CO" at end of catalogue number, ie PUPP1GCO

Certification Number: PUPP1G: GMA-509981-EA PUPP151G: GMA-509981-EA PUPPSW1G: GMA-501109-EA PUPPV1G: GMA-501807-EA
GSM Electrical (Australia) Pty Ltd Level 2, 142-144 Fullarton Road, Rose Park SA 5067 P: 1300 301 838 F: 1300 301 778 E: service@gsme.com.au
www.gsme.com.au

Data Specification Sheet 230727



References

Adobe PDF Library 17.0 Adobe InDesign 20.0 (Macintosh)