Mibro Watch GS Active2
User Manual
Product Description
Package Contents: Mibro Watch GS Active2 (including silicone strap) × 1, User Manual × 1, Magnetic Charger × 1, Additional Strap × 1.
- 1. Power Button: Press and hold for 5 seconds to turn on. Press and hold for 3.5 seconds to turn off or go to the power off page.
- 2. Full Touch Display
- 3. Function Buttons
- 4. Charging Port (Negative Pole)
- 5. Heart Rate Sensor
- 6. Barometric Vent
- 7. Microphone
- 8. Charging Port (Positive Pole)
- 9. Speaker Opening
- 10. Balance Hole
Connecting Your Watch
- Scan the QR code to download the "Mibro Fit" app.
- Use "Mibro Fit" to scan the QR code on the watch for pairing.
Binding and Unbinding a Watch
Android System: In the app, select "Delete current device" to unbind.
iOS System: In the app, select "Delete current device", then navigate to your phone's Bluetooth settings, and select "Ignore this device" to disconnect.
Charging
- Do not charge the device in a humid environment.
- Ensure the metal surface of the watch connector and the magnetic charging cable are clean and free of corrosion.
- Clean the metal connector on the back of the watch and the magnetic charging cable regularly with a soft cloth. Ensure the contacts are fully connected for proper charging.
- This product does not come with a power adapter. For safety, use a computer's USB port or a 5V-1A power adapter. Purchase adapters through official channels and avoid low-quality or counterfeit adapters to prevent damage or fire.
Functions
| Icon | Function | Description |
|---|---|---|
| ? | Sport | Supports 150 sport modes. |
| ❤️ | Health Circle | Records daily activity data, resetting at 00:00 each day. |
| ? | Phone | Answer and make calls after connecting the phone to the watch. |
| ? | Data | Records daily training data including steps, distance, calories, activity duration, and active times. |
| ? | Heart Rate | Intelligent monitoring of heart rate. |
| ? | Blood Oxygen (SpO2) | Intelligent monitoring of blood oxygen saturation. |
| ? | Sleep | Intelligent monitoring of sleep quality. |
| ☀️ | Weather | Synchronize weather information after connecting to your phone. |
| ?️ | Training Status | Records the last 7 days of training status and recovery time. |
| ? | Running Ability | Monitors and analyzes running activity, providing real-time data and reports to improve performance. |
| ? | Stress | Monitors daily stress levels and provides analysis. |
| ? | Music Control | Control music playback on your phone after connecting. |
| ⏰ | Alarm | Set alarms for the watch. |
| ? | World Clock | Displays current time in 5 countries simultaneously. |
| ?️ | Route Navigation | Preview, set, and use routes, with navigation view and deviation reminders. |
| ? | Flashlight | Turn on/off, adjust flash frequency (off, slow, fast), and select color (white, red, blue, yellow). |
| ⛰️ | Altimeter | Measures altitude. |
| ? | Calendar | Displays Gregorian calendar. |
| ⏱️ | Timer | Set timer. |
| ⏱️ | Stopwatch | Stopwatch function. |
| ? | Calculator | Mini-calculator function. |
| ? | One-Touch Emptying | Press the arrow button and shake the watch to expel water droplets. |
| ? | NFC Card Key | Supports NFC card key function (maximum 3 access cards can be activated). |
| ?️ | Voice Assistant | Activate your phone's voice assistant (e.g., Siri on iOS). |
| ⚙️ | Settings | Display & Brightness, Card Management, Sound & Vibration, Gestures, Notifications, Password, Settings, Training Settings, System (Power Off, Restart, Language, Connect New Device, Factory Reset), Device Info. |
Troubleshooting
Troubleshooting Table
| Designation | Troubleshooting Steps |
|---|---|
| Mibro Watch GS Active2 |
|
Warranty Exclusion
- Normal wear and tear, dirt caused by user use (e.g., scratches, color changes), artificial damage from contact with chemical reagents, sharp objects, drops, extrusion, or deformation.
- Unauthorized maintenance, collision, misuse, negligence, water ingress, accidents, or failures caused by the use of non-official accessories.
- Tearing or altering labels, counterfeiting anti-counterfeit marks, etc.
- Damage due to force majeure.
- Failure to comply with the performance defects listed in the table.
Additional Information
- The measurement results of this product are for reference only and are not intended for medical purposes or as a basis for self-diagnosis and treatment. Always follow your doctor's advice.
- The water resistance is 5ATM, but it is not seawater resistant. Do not dive to depths of 30 meters or dive for extended periods. Avoid contact with hot water, as steam can affect the watch.
- The company reserves the right to change the content of this manual without prior notice. Some functions may vary depending on the software version.
Disposal of Electrical and Electronic Equipment
The crossed-out wheelie bin symbol on the product, battery, or packaging indicates that electronic products and batteries must be disposed of separately at the end of their life. Do not dispose of them with household waste. Users are responsible for disposing of the device through official collection points or recycling services for electrical and electronic equipment and batteries, in accordance with local laws (WEEE - Waste of Electrical & Electronic Equipment).
Return of Old Equipment
Owners of old equipment can return their devices to designated collection points or services provided by public disposal authorities to ensure proper disposal. An online directory of collection and return points can be found at: https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen
Data Protection
All end-users of old electrical and electronic equipment are reminded that they are responsible for deleting personal data from the devices to be disposed of.
Specifications
- Designation: Mibro Watch GS Active2
- Model: XPAW024
- Dimensions: ⌀46x11.7mm
- Operating Frequency: 2400-2483.5MHz
- Signal Transmission: ≤20 dbm
- Battery Capacity: 350mAh
- Rated Voltage: 3.8 V
- Shutdown Voltage during Charging: 4.35V
- Rated Input: 5V 1A
- Minimum Charging Power: 0.1 W
- Maximum Charging Power: 1W
- Compatible with: Android 5.0 or iOS 13.0 and higher
Customer Service
Email: service@mibrofit.com
Manufacturer: ZhenShi Information Technology (Shanghai) Co., Ltd
Address: Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai, China
Exporter: ZhenShi Information Technology (Shenzhen) Co., Ltd
Address: RM1401-1403, 1408, Tower E, Galaxy World, Minzhi Street, Longhua District, Shenzhen, China
Compliance Statement
Zhenshi Information Technology (Shenzhen) Co., Ltd. hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at: https://www.mibrofit.com/pages/support
QR Codes
Scan to view user manuals in more languages.
Scan to watch the function use video.
