Xiaomi Mi Band 6 User Manual

Product Overview

Read this manual carefully before use, and retain it for future reference.

The Xiaomi Mi Band 6 consists of the following parts:

• a Fitness Tracker: Features a touchscreen, heart rate sensor, and charging port.
• b Wristband: The strap that holds the fitness tracker.
• c Charging Cable: Used to recharge the device.

[Diagram: Shows the fitness tracker from different angles, the wristband, and the charging cable with USB connector.]

Installation

To install the fitness tracker into the wristband:

1. Insert one end of the fitness tracker into the slot from the front of the wristband.
2. Press down on the other end with your thumb to push the fitness tracker completely into the slot.

[Diagram: Illustrates hands inserting the fitness tracker into the wristband.]

Wearing

For optimal comfort and performance:

1. Comfortably tighten the band around your wrist about 1 finger width away from your wrist bone.
2. Ensure the back of the wristband makes good contact with your skin for the heart rate sensor. The fit should be neither too tight nor too loose, allowing the skin to breathe. Tighten the wristband before exercise and loosen it afterward.

Fit Check:

• Too loose: If the band easily moves up and down the wrist, or the heart rate sensor cannot collect data, try tightening the wristband. [Diagram: Shows a wristband that is too loose.]
• Just right: The band comfortably fits around the wrist. [Diagram: Shows a wristband with a proper fit.]

Connecting

To connect your Mi Band 6 to your smartphone:

1. Download and install the latest version of the Mi Fit app from the Google Play App Store or other third-party app stores. You can scan the provided QR code. [Diagram: QR code labeled "Mi Fit app QR code (Android 5.0 & iOS 10.0 or above)".]
2. Log into your Mi account in the Mi Fit app and follow the on-screen instructions to connect and pair the band with your phone. Ensure Bluetooth is enabled on your phone. Hold the phone and band close to each other during pairing. The band will vibrate and display a pairing request; tap the touch button to complete pairing. [Diagram: Shows a hand holding a phone and a Mi Band, with a pairing prompt on the band.]

Usage

After successful pairing, the band tracks daily activities and sleeping habits.

• Touch the button to light up the screen.
• Swipe up or down to view various functions, such as exercise data and heart rate measurements.
• Swipe right to return to the previous page.

[Diagram: Shows swiping up/down on the screen to switch functions.]

[Diagram: Shows swiping right on the screen to return to the previous page.]

Open NFC Bus Card

Use the Mi Fit app to activate the NFC bus card feature. Once activated, you can use your wristband to swipe for bus or subway access. Keep the wristband close to the middle of the swiping area when using it.

[Diagram: Shows a wristband being swiped over an NFC reader.]

Xiao AI Assistant

Xiao AI is Xiaomi's intelligent voice assistant.

• Wake up Xiao AI by swiping right on the watch face page.
• Use Xiao AI to query information, check weather, set clocks, and remotely control smart devices. For more functions, refer to the connected mobile app.

Reminder: To use Xiao AI's smart voice service, the bracelet must remain connected to the app, and the app must have network access.

Dissassembly

To remove the band from your wrist:

1. Hold both ends of the wristband and pull them apart until a small gap appears between the fitness tracker and the wristband.
2. Use your finger to pop the fitness tracker out of its slot from the front side of the wristband.

[Diagram: Illustrates hands separating the wristband to remove the fitness tracker.]

Charging

Recharge your band immediately when the battery level is low.

[Diagram: Shows the charging cable connected to the Mi Band 6.]

Precautions

• When measuring heart rate, keep your wrist still.
• The Mi Band 6 NFC version has a waterproof rating of 5 ATM, suitable for hand washing, swimming in pools, and shallow beaches. It is not suitable for hot water, saunas, or diving.
• The touch screen does not support underwater operation. If the bracelet is wet, clean it with tap water and operate only after it is dry.
• Avoid wearing the band too lightly. Keep the charging contact part dry. Clean the watch with clean water. If redness or swelling occurs at the contact area, stop use immediately and consult a doctor.
• The device is not a medical device; data provided should not be used for diagnosis or treatment.
• When charging, use a power adapter that meets safety standards or is CCC-certified.

Specifications