DEWALT Structural Anchor Selection Guide
Engineered by DEWALT, this guide assists in selecting the appropriate structural anchors for various applications. The document contains information current as of May 1, 2019, and DEWALT reserves the right to change designs, materials, and specifications without notice.
Adhesive Anchors
| Product | Anchor Diameter | ICC-ES Approvals | UL Listing | FM Approval | Capacity | Cost | Hilti Similar | Unreinforced Masonry | Ungrouted Masonry | Grouted Masonry | Concrete-filled Metal Deck | Post-Installed Rebar | Seismic | Cracked Concrete | Concrete |
| Pure110+™ 1 to 1 and 3 to 1 Cartridge - Epoxy Anchor | 3/8" - 1-1/4" #3 - #11 Rebar | ESR-3298 | ESR-3298 | ESR-3298 | ESR-3298 | lbs. lbs. lbs. lbs. | $ $ $ | RE 500 V3 | |||||||
| Pure50+™ 1 to 1 Epoxy Anchor | 3/8" - 1-1/4" #3 - #10 Rebar | ESR-3576 | ESR-3576 | ESR-3576 | lbs. lbs. lbs. | $ $ | RE 500 SD | ||||||||
| AC200+™ 10 to 1 Cartridge Hybrid Anchor | 3/8" - 1-1/4" #3 - #10 Rebar | ESR-4027 | ESR-4027 | ESR-4027 | ESR-4027 | lbs. lbs. lbs. lbs. | $ $ $ | RE 100 | |||||||
| AC100+ Gold™ 10 to 1 Cartridge - Vinylester Anchor | 3/8" - 1-1/4" #3 - #10 Rebar | ESR-2582 | ESR-2582 | ESR-2582 | lbs. lbs. lbs. | $ $ | HY 200 | ||||||||
| AC200+™ 2 to 2 Cartridge - Epoxy Anchor | 3/8" - 1-1/4" #3 - #10 Rebar | ESR-3200 | ESR-3200 | ESR-4105 | lbs. lbs. lbs. | $ $ | HY 100 HY 270 |
Expansion Anchors
| Product | Anchor Diameter | ICC-ES Approvals | UL Listing | FM Approval | Capacity | Cost | Hilti Similar |
| Power-Stud®+ SD1 Carbon Steel Wedge-Anchor | 1/4" - 1-1/4" | ESR-2818 | ESR-2818 | ESR-2818 | lbs. lbs. | $ $ | Kwik Bolt 3 (KB3) |
| Power-Stud®+ SD2 High Performance Carbon Steel Wedge-Anchor | 3/8" - 3/4" | ESR-2502 | ESR-2502 | ESR-2502 | lbs. lbs. lbs. | $ $ $ | Kwik Bolt TZ |
| Power-Stud®+ SD4 304 Stainless Steel Wedge-Anchor | 1/4" - 3/4" | ESR-2502 | ESR-2502 | ESR-2502 | lbs. lbs. lbs. | $ $ $ $ | Kwik Bolt 3 (KB3) / KB TZ SS |
| Power-Stud®+ SD6 316 Stainless Steel Wedge-Anchor | 1/4" - 3/4" | ESR-2502 | ESR-2502 | ESR-2502 | lbs. lbs. lbs. | $ $ $ $ | Kwik Bolt 3 (KB3) / KB TZ SS |
Screw Anchors
| Product | Anchor Diameter | ICC-ES Approvals | UL Listing | FM Approval | Capacity | Cost | Hilti Similar |
| Screw-Bolt+™ High Performance Screw Anchor | 1/4" - 3/4" (CS and MG) | ESR-3889 | ESR-3889 | ESR-3889 | lbs. lbs. lbs. | $ $ | KH-EZ / KWIK |
Speciality Anchors
| Product | Anchor Diameter | ICC-ES Approvals | UL Listing | FM Approval | Capacity | Cost | Hilti Similar |
| Atomic+ Undercut™ Undercut Anchor | 5/8" - 1-1/8" (Rod size 3/8" - 3/4") | ESR-3067 | ESR-3067 | ESR-3067 | lbs. lbs. lbs. lbs. | $ $ $ $ | HDA Undercut |
| Power-Bolt™+ Heavy Duty Sleeve Anchor | 1/4" - 3/4" (CS) 1/4" - 1/2" (SS) | ESR-3260 | ESR-3260 | ESR-3260 | lbs. lbs. lbs. | $ $ $ | HSL-3 |
MEP Hanger Anchors
| Product | Anchor Diameter | ICC-ES Approvals | UL Listing | FM Approval | Capacity | Cost | Hilti Similar |
| Snake+™ Rod Hanger / Screw Anchor | 1/4" - 1/2" | ESR-2272 | ESR-2272 | ESR-2272 | lbs. lbs. | $ $ | KH-EZI |
| Hangermate®+ (Concrete) Rod Hanging Anchor | 1/4" - 3/8" | ESR-3889 | ESR-3889 | ESR-3889 | lbs. lbs. | $ $ | HDI-P TZ |
| Mini-Undercut+™ Rod Hanger for PT and Hollow Plank | 3/8" | ESR-3912 | ESR-3912 | ESR-3912 | lbs. | $ $ | HCI-MD KCS-MD |
| Bang-It+™ Speciality Cast-In-Place | 1/4" - 3/4" | ESR-3657 | lbs. lbs. | $ $ $ | HCI-WF KCS-WF | ||
| Wood-Knocker+™ II Speciality Cast-In-Place | 1/4" - 3/4" | ESR-3657 | ESR-3657 | ESR-3657 | lbs. lbs. | $ $ $ | No Similar Product |
| DDI+™ (Deck Insert) Thread Insert for Composite Steel Deck | 3/8" - 3/4" | ESR-3958 | lbs. lbs. | $ $ $ | No Similar Product |
Note: 'Indicates a Code Listed Product. Hilti is a registered trademark of Hilti Corp.
Contact Information
For technical support, please contact a DEWALT Product & Code Expert at 800-524-3244 or visit the website at www.DEWALT.com.
DEWALT USA: (800) 524-3244
Canada: (905) 673-7295
Website: www.DEWALT.com
The information and data contained within this document is current as of May 1, 2019, and is subject to change after such date. DEWALT reserves the right to change the designs, materials, and specifications of the products in this document without notice and shall have no liability with respect to such changes. Please contact DEWALT for the most current and up to date information and data or refer to our website at www.DEWALT.com.
