User Manual for MettaX models including: MD302 Wi-Fi Dashcam, MD302, Wi-Fi Dashcam, Dashcam
Video Based Safety DashCam MD302 | MettaX - The future of IoT
MD302 User Manual MD302 WiFi Dashcam User Manual ManufactureMettaX Digital (Shenzhen) Co., Ltd VersionV1.0 Date2024-4-9 MD302 User Manual 1. Introduction MD302 HD Hidden Recorder is a small car device for HD video recording, supporting loop recording, emergency locking, and other functions. The product is characterized by small size and strong concealment and can be easily installed in any position in the car to provide security for users. Rear camera Slot Type-C Port Inside camera Up Reset Key Power Key Down Front camera Menu OK MD302 User Manual 2. Accessory List ACC power cable Instruction card Instruction card Tip: The illustrations of products, accessories, user interface, etc. in the manual are schematic diagrams for reference only. Due to product updates and upgrades, there may be slight differences between the actual product and the schematic, please refer to the actual product. 3. Basic parameters Pixel Resolution Wi-Fi G-sensor Loop recording Memory card Voice recording Operation temperature Video encoding 5 megapixel 2592x1944P Front (built-in) 1080P Cabin (external) 1080P Rear (external) Yes Yes Yes TF card 128GB Max. Supported -20~65 H.264 Lens 145° Voice prompt language English Temp-park motion record Motion detection Date stamp Power interface Take photos Size Video format Yes Yes Yes Type-C, DC 5V/2A Supported by APP 120*46*64mm MP4 4. Button Description Power button Function 1: switch machine function In the shutdown state, long pressPower Keyfor 2 seconds to turn on the power of the machine, and the machine will automatically start working. In the power-on state, long press thePower Keyand hold for 2 seconds. The machine automatically saves the video files and user settings and shuts down. Function 2: Turn off the display function In the power-on state, pressPower Keyto turn off the display, and press again to turn on the display. MD302 User Manual Menu key Function: Menu function In the standby state, short press theMenu Keyto switch between different modes (recording/photographing/playback). OK Button Function 1: Enable/disable the recording function In the video mode, short press the OK button to start recording, and short press the [Confirm Key] again to stop recording. Function 2: Camera button In the photo mode, short press [Enter] once to take a photo. Function 3: File playback button In the file browsing mode, short press the Enter keyto play the video. Function 4: Confirm key In standby video mode/photograph mode/playback mode; long press [menu key] to enter menu mode, short press [up/down key] to browse, and short press [enter key] to confirm. Down button Function: Page down function It is the page down function in the menu setting and playback mode. Up key Function 1: Page up function It is the page up function in the menu setting and playback mode. Function 2: WIFI function When not recording, long press the up button to turn on/off the WIFI Function 3: Camera switching function After connecting to the external rear camera, dual cameras will be displayed automatically. In the video mode, short press the [up key] to switch between the front camera, picture-in-picture, and rear camera display modes; in the photo mode, short press the [up key] to switch between the front camera and the rear camera. 5. Product Features High Definition Adopts high definition camera, capable of realizing 2.5K HD recording. Hidden installation It can be installed in a hidden location in the car without affecting the aesthetics of the car. MD302 User Manual Loop Recording: Support loop recording function, when the memory card storage space is full, it will automatically overwrite the earliest video file. Emergency Lock Support emergency lock function, when the vehicle encounters an emergency, it will immediately lock the current video file. Auto Power On Recording Support auto power on the recording function, when the vehicle starts, it will start recording automatically. 6. Mobile APP Download (1) This product is used with the MettaGO App software. Please search for MettaGO in the app market or scan the QR code below to download and install the app. (2) After the device is powered on and enters the working state, find the WIFI that starts with "MettaX-********" in the WIFI settings of your cell phone, and enter the default password "12345678" to connect. (3) Enter MettaGO APP after the connection is completed, the time of the recorder will be synchronized with the current time of the phone. (Be sure to format it the first time you use it on the product. Also to prevent too many emergency video files from taking up memory space on the device, it is recommended to format the memory card 1-3 times per month regularly). MD302 User Manual 7.Introduction to the basic functions of the APP (1) Set up Wi-Fi connection (2) Operator annunciator (3) Video playback MD302 User Manual (4) Function setting MD302 User Manual 8.Installation method (1) First turn off the car engine, insert the TF card into the device, and then determine the installation location of the device, which is usually installed on the front and rear windshields of the car. NotePlease use TF memory cards produced by regular manufacturers. You can choose memory cards with a capacity of 8GB-128GB and read/write speeds of no less than U1/Class10 level. (2) Clean the mounting location and make sure the surface is clean and dust-free. (3) Attach the static sticker to the windshield (4) Fix the bracket of the car recorder on the static sticker, and adjust the angle and direction. (5) Plug the car adapter into the car battery, the yellow wire connects to the VCC long power, the red wire connects to the ACC firing wire, and the black wire connects to the ground wire. (6) Connect the USB port of the recorder to the corresponding position of the car fuse box with a charging extension cable. NoteWiring can be done by laying the charging extension cord along the edge of the vehicle's windshield. (7) After the installation is complete, launch the software and make settings such as time, video quality, recording time, and so on. (8) Start the vehicle and check that the equipment is working properly. NoteWhen the device is installed correctly, the system works to indicate the signal; The device starts to enter the working state and the display shows the video recording in progress. 9.Caveat Before using this product, please read all precautions and online guides to ensure proper and safe use. (1) Please install this product correctly. We are not responsible for any damages caused by installation reasons other than the quality of the product itself. (2) Please use the car charger head, power cord, and other accessories that come standard with this product, to avoid the use of malfunctions brought about by inconsistent specifications. We are not responsible for any damage caused by using non-standard car charger heads and power cords. MD302 User Manual (3) Consumers who use power adapters for power supply should purchase power adapters that are CE-certified and meet the standard's requirements. (4) Keep this product away from strong magnetic fields, which may cause damage to the product. (5) It is prohibited to use this product at high temperatures above 60°C or low temperatures below -10°C. (6) Please use this product as permitted by law. 10. Warranty terms (1) Merchandise is warranted for one year from the date of departure of the shipment. (2) Warranty service is valid only under normal use within the warranty period. If the product is not used according to the requirements of the instruction manual caused by the damage (special attention to the occurrence of water, drop, and other abnormal use is not covered by the warranty). (3) The warranty does not cover damages caused by the use of unauthorized and inferior communication cables, equipment failures, and damages caused by force majeure factors such as flood, fire, lightning, earthquake, and other equipment failures and damages that are not caused by the equipment itself.WPS 文字