AEG

Installation Dimensions

This section provides key dimensions for the installation of the AEG 7000 Series FFB53600PM freestanding dishwasher. All measurements are in millimetres (mm).

Main Unit Dimensions and Cabinet Integration:

• Dishwasher Width: 596 mm
• Dishwasher Depth: 630 mm
• Dishwasher Height: 818 mm
• Required Cabinet Opening Height: 850 mm
• Minimum Clearance Above Unit: 550 mm
• Required Cabinet Opening Width: 600 mm
• Kickplate Height: 60 mm
• Door Opening Clearance (from front edge): 150 mm
• Control Panel Position (from front edge): 110 mm
• Main Body Height: 845 mm
• Total Depth Requirement (including door open and rear access): 1200 mm

The diagram illustrates the dishwasher fitting into a standard kitchen cabinet, showing how the unit's dimensions relate to the required opening sizes for width, height, and depth.

Plumbing and Drainage Connections:

• The diagram shows the typical positions for water inlet and drainage connections at the rear of the unit.
• Connection points are located at heights of 740 mm and 760 mm from the floor.
• These connection points are positioned at distances of 90 mm and 100 mm from the wall.

Important Information

IMPORTANT: These dimensions are a guide only. All measurements are in millimetres (mm).

For complete installation instructions, please refer to the manual provided with the product.