NICOR Lighting
Owner's Manual for NICOR models including: DGD22120SRD9WH, DGD22120SRD9BK, DGD22120SRD9OB, DGD2 2 Inch Gimbal Recessed LED Downlight, DGD2, 2 Inch Gimbal Recessed LED Downlight, Gimbal Recessed LED Downlight, Recessed LED Downlight, LED Downlight, Downlight
DGD Select – Gimbal Recessed LED Downlight – NICOR Lighting
File Info : application/pdf, 3 Pages, 417.68KB
DocumentDocumentDGD2 2" Gimbal Recessed LED Downlight Product Description The DGD LED Downlight Gimbal Series offers a line of gimbal downlights that simplify installing tailored lighting in challenging locations. The high performing light engine with off-board driver allows for more flexible installations and increased lifetime with improved thermal management. The DGD fixture uses a plenum-rated cable connector to link the downlight module to the remote driver box and then pops into place with its adjustable, spring-loaded retention tabs for a secure fit, eliminating the need for a J-box or recessed housing. Adding directional lighting for architectural accent in areas such as living rooms, hallways, stairways and corridors is now easier than ever. Construction · Cast aluminum trim routes heat away from electrical components · Adjustable, spring loaded retention tabs ensure secure fixture retention · Certified for direct contact with insulation Optical System · Selectable models use a dual emitter array that enables CCT selection of 2700K, 3000K, 3500K, 4000K, or 5000K · COB with greater than 90 CRI and an R9 greater than 50 · TIR optic provides smooth, uniform light with a 45° beam angle · 32° Tilt with 360° rotation Electrical · Input voltage 120VAC, 60Hz · CCT selection switch on driver · Off-board driver minimizes installation height and maximizes fixture life through improved heat management · Dimmable to less than 10% with compatible TRIAC dimmers · Operating temperature rating of -4°F to 104°F (-20°C to 40°C) · Lifetime rated for greater than 54,000 hours Mounting and Installation · Spring loaded retention arms allow for easy installation into ceilings up to 5/8" thick · Off-board driver/junction box includes three 1/2" KOs and three-port poke-in connectors · Extension power cables available · Rough in template available Finish · Matte white powder coat finish · Also available in Black or Oil-Rubbed Bronze Listings · cETLus 1598 Classified for wet locations · Energystar listed · CA Title 24 compliant (JA8) · Certified for direct contact with insulation (IC-Rated) · Compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5) for closet use · RoHS Compliant: Free from harmful and hazardous materials · LED lumen maintenance: L70(9k)>54,000 hrs · Meets FCC Part 15, Subpart B, Class B standards for conducted and radiated emissions · LM-79, LM-80 testing performed in accordance with IESNA standards Warranty · 5-year limited system warranty standard · Warranty does not cover product failure due to an overvoltage event (power surge) · For installations where power surge may be possible, NICOR recommends installing additional surge protection at the electrical distribution panel Project Catalog Type Date 3500K 3000K K 4000K 2 700K 5000 DGD2v2 Gimbal Recessed LED Downlight 400 Lumens Selectable CCT *Except 5000K HIGH EFFICACY LED LIGHT 2022-E EXCLUDES 5K SOURCE REQUIREMENTS NICOR LLC 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com September 20, 2024 11:25 AM DGD22 Page 1 Ordering Ordering Information Series DGD Size 2 Version 2 Voltage 120 CCT's Trim S (Select : 27/30/35/40/50K) RD (White) CRI 9 (90+) Specifications and dimensions subject to change without notice. Please refer to the website for the most up-to-date information. Accessories 2' Extension Cable 10' Extension Cable accessories sold separately RELS-EXTCABLE-2 RELS-EXTCABLE-10 Example: DGD22120SRD9WH Finish WH (White) BK (Black) OB (Oil Rubbed Bronze) Performance Data Model Number DGD22120SRD9** Performance Data CCT Lumens Wattage 2700 428 4.81 3000 461 4.75 3500 490 4.67 4000 507 4.72 5000 498 4.83 Lumens/Watt 89.1 97.2 104.9 107.5 103.3 Recommended Dimmers* Lutron DIVA DVELV-303P LEVITON C22-06672-1LW Lutron Skylark SELV-300P *Not a complete list. Check compatibility before installation. Photometric Data DGD22 @ 3000K Input Voltage (VAC) System Level Power (W) Delivered Lumens (Lm) System Efficacy (Lm/W) Correlated Color Temp (K) Color Rendering Index (CRI) Beam Angle (°) Spacing Criteria 120V 4.81 461 97.1 3049 95 R9=65 44.3 0.73 747 Intensity Summary 560 (Candle Power) 378 Angle Mean CP 0 742 187 5 716 15 528 25 280 35 88 45 25 55 10 65 6 75 3 85 1 90 0 CCT Data Multiplier 2700K 3000K 3500K 4000K 5000K 0.929 1.000 1.062 1.099 1.081 Fixture tested per LM-79-08. Photometric data is of the performance of a representative fixture. Results may vary in the field. Cone of Light Tabulation Mounted height (Feet) 4 6 8 10 12 14 16 Footcandles Beam Center 46.2 20.4 11.4 7.2 5.0 3.6 2.7 Diameter (Feet) 3.3 4.9 6.5 8.1 9.8 11.4 13.0 Zonal Lumen Summary Zone 0-30 0-40 0-60 0-90 90-180 0-180 Lumens 356 418 452 461 0 461 % of Luminaire 77.2% 90.6% 98% 100% 0% 100% NICOR LLC 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com September 20, 2024 11:25 AM DGD22 Page 2 1.75" (46mm) Dimensions 2.5" (65mm) 1.63" (41mm) 12.88" (325mm) 2.75" (70mm) 1.88" (47mm) 2.00" (52mm) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. NICOR LLC 2200 Midtown Place NE, Albuquerque, NM 87107 P: 800.821.6283 F: 800.892.8393 www.nicorlighting.com September 20, 2024 11:25 AM DGD22 Page 3