Termatech TT44 Series Technical Specifications
This document provides detailed technical specifications, dimensions, and clearance requirements for the Termatech TT44 series of wood-burning stoves.
Model Overview
| Model | Combustion Chamber (W/D) | Weight (kg) | Height (mm) | Width (mm) | Depth (mm) | Flue Diameter (mm) | Rear Flue Height (mm) | Top Flue Height (mm) |
|---|---|---|---|---|---|---|---|---|
| TT44 | 324/231 mm | 116 | 998 | 501 | 369 | Ø140 | 813 | 937 |
| TT44S | 324/231 mm | 147 | 998 | 501 | 369 | Ø140 | 813 | 937 |
| TT44CG | 324/231 mm | 132 | 998 | 501 | 369 | Ø140 | 813 | 937 |
| TT44G | 324/231 mm | 116 | 998 | 501 | 369 | Ø140 | 813 | 937 |
Note: All height measurements are without adjustable feet.
Clearance Requirements to Combustible Materials
To avoid discoloration and improve convection, Terma Tech recommends maintaining specific clearances from combustible materials. These dimensions apply to the stove body.
For Uninsulated Pipes
| Clearance Type | Minimum Distance (mm) |
|---|---|
| Side | 100 |
| Rear | 100 |
| Front | 1000 |
(Note: Based on detailed diagrams, 100mm side/rear and 1000mm front are the most conservative minimums for uninsulated pipes.)
For Insulated Pipes
| Clearance Type | Minimum Distance (mm) |
|---|---|
| Side | 100 |
| Rear | 100 |
| Front | 1000 |
(Note: Based on detailed diagrams, 100mm side/rear and 1000mm front are the most conservative minimums for insulated pipes.)
Please note: National regulations regarding the use of flue pipes and their clearances to combustible materials are not included here and must be observed.
