Philips CD Soundmachine 5000 Series

Model: TAZ5000

User manual

Register your product and get support at: www.philips.com/support

1 Important

Safety

[CAUTION] RISK OF ELECTRIC SHOCK DO NOT OPEN

[CAUTION]: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

[lightning-bolt-symbol] indicates uninsulated material within the device may cause an electrical shock. For safety, do not remove the covering.

[exclamation-mark-symbol] calls attention to features for which you should read the enclosed literature to prevent operating and maintenance problems.

[WARNING] To reduce the risk of fire or electric shock, the device should not be exposed to rain or moisture. Do not place liquid-filled objects on the device.

[CAUTION] To prevent electric shock, fully insert the plug. For polarized plugs, match the wide blade to the wide slot.

[WARNING] Never remove the casing. Never lubricate any part. Never look into the laser beam. Never place on other electrical equipment. Keep away from direct sunlight, naked flames, or heat. Ensure easy access to the power cord for disconnection.

Ensure adequate ventilation space. Use only manufacturer-specified attachments/accessories.

[CAUTION] regarding battery usage: Install correctly (+/-). Do not expose to excessive heat. Remove battery if not used for a long time. Do not expose to dripping or splashing. Do not place sources of danger (e.g., liquid-filled objects, lit candles) on the product. The disconnect device (mains plug/coupler) must remain readily operable. Use in environments between 0°C and 40°C.

Notice

[NOTE] Any unauthorized modifications may void the user's authority to operate the equipment.

Compliance

TP Vision Europe B.V. declares compliance with Directive 2014/53/EU. Declaration of Conformity available at www.philips.com/support.

Care of the environment

Disposal of your old product and battery

Product designed with high-quality, recyclable materials.

♻️ This symbol means the product is covered by European Directive 2012/19/EU.

♺ This symbol means the product contains batteries covered by European Regulation (EU) 2023/1542, which cannot be disposed of with normal household waste.

Inform yourself about local separate collection systems for electrical/electronic products and batteries. Follow local rules; do not dispose of with household waste. Correct disposal prevents negative environmental and health consequences.

Removing the disposable batteries

Refer to the battery installation section.

Environmental information

Unnecessary packaging omitted. System materials are recyclable if disassembled by a specialized company. Observe local regulations for packaging, exhausted batteries, and old equipment.

Care for your product

• Do not insert objects other than discs into the disc compartment.
• Do not insert warped or cracked discs.
• Remove discs if not using the product for an extended period.
• Clean only with a microfiber cloth.

CLASS 1 LASER PRODUCT label description.

[NOTE] The type plate is located on the bottom of the product.

2 Your CD soundmachine

Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support.

Introduction

You can listen to FM radio; enjoy audio from discs, Bluetooth, and other external audio devices.

What's in the box

• Main unit (x1)
• Power cord (x2)
• Quick Start Guide (x1)
• Safety sheet (x1)
• Warranty card (x1)

Overview of the main unit

The unit features the following controls:

1. [Power/Standby button]: Turn on or to standby.
2. [SLEEP button]: Select a sleep timer to enter standby.
3. [Preset buttons 1, 2, 3]: Select favorite preset station.
4. [Volume +/- buttons]: Decrease/Increase volume.
5. [Disc tray]: Disc compartment.
6. [FM button]: Enter FM mode.
7. [USB/AUX IN button]: Switch between USB/AUX IN mode.
8. [MENU (MODE) button]: Access source menu setting.
9. Display screen: Display play information.
10. [CD/BT button]: Switch between CD/BT mode.
11. [Play/Pause button ⏸️]: Start and pause play.
12. [OK button]: Confirm selection/Program tracks/Store radio stations.
13. [Headphone jack ?]: Connect with external headphone device.
14. [USB port]: Connect with USB storage device.
15. [AUDIO IN jack]: Connect with external audio device.
16. [Skip/Navigate buttons ⏪⏩]: Skip previous/next album/navigate preset station.
17. [Stop button ⏹️]: Stop play.
18. [Tune +/- buttons]: Tune to FM radio station, fine-tune frequency. Skip next/previous track.
19. [AC IN socket]: Insert power cable plug.
20. [ANTENNA]: FM antenna.

3 Get started

[CAUTION] Use of controls or adjustments or performance of procedures other than specified may result in hazardous radiation exposure or unsafe operation. Always follow the instructions in this chapter sequentially.

Connect power

The unit can be powered by AC or batteries.

Option 1: AC power

[WARNING] Ensure power supply voltage matches unit's rating. [WARNING] To disconnect AC power, pull the plug, not the cord.

Connect AC power cord to wall socket.

[NOTE] Turn unit off after use to save energy.

Option 2: Battery power

[CAUTION] Batteries contain chemicals; dispose of properly.

1. Open battery compartment.
2. Insert 6 batteries (1.5V R14/UM2/CELL) with correct polarity (+/-).
3. Close compartment.

[NOTE] Batteries are not supplied.

Turn on/Standby

Press the [Standby button] to turn on/off.

Switch to standby mode

Product switches to standby automatically after 15 minutes of no audio. Press [Standby button] to wake up.

App download

Scan QR codes or search "Philips Entertainment" in App Store/Google Play.

Download the app: philips.to/entapp

The Philips Entertainment App allows you to control music playback, switch sources, and more from your smart device.

4 Play from CD

Play a CD

[NOTE] Cannot play CDs with copyright protection technologies.

Supported media: Commercial audio CDs, CD-R, CD-RW, CD-MP3 discs.

1. Switch the source selector to CD. "CD" displays on the screen.
2. Open the CD compartment.
3. Insert a CD with the printed side facing up and close the CD lid gently. Playback starts automatically.

Controls: Use [Skip button ⏪] to select track, [Play/Pause button ⏸️] to pause/resume, and [Stop button ⏹️] to stop.

Use CD menu

1. In CD mode, press [MENU (MODE)] to enter the menu setting.
2. Press [Skip ⏩] or [Tune ⏪] to select and enter corresponding menu options.

Menu options:

• [MODE]: Select REP ONE, REP ALL, REP ALM, SHUF ON/OFF. (REP ALM supports CD-MP3 only)
• [DBB]: Select DBB2, DBB1, or OFF.
• [INFO]: Display track information.
• [DIM]: Adjust display brightness (HIGH/MED/LOW/OFF).
• [SYSTEM]: Access system settings.

Program tracks

You can program a maximum of 20 tracks on a CD or 99 tracks on an MP3 disc.

1. Press [Stop button ⏹️] to stop playback.
2. Press [PROG] to activate program mode.
3. Press [Skip ⏩] or [Tune ⏪] to select a track number, then press [OK] to confirm.
4. Repeat step 3 to program more tracks.
5. Press [Play/Pause button ⏸️] to play programmed tracks. "PROG" is displayed during playback.

To erase the program, press [Stop button ⏹️] twice.

5 Listen to the radio

You can listen to FM radio with this product.

[NOTE] Antenna placement: Position the antenna as far as possible from TV or other radiation sources. Fully extend and adjust the antenna for optimal reception.

Listen to FM radio

Tune to an FM radio station

1. Press [FM button] to select FM source.
2. Press and hold [Skip ⏩] for three seconds. The radio tunes to a station with strong reception automatically.
3. Repeat step 2 to tune to more stations.

To tune to a weak station: Press [Skip ⏪⏩] repeatedly until you find optimal reception.

Store FM radio stations automatically

[NOTE] You can store a maximum of 30 FM radio stations.

1. Press [FM button] to select FM source.
2. Press and hold [PROG/PRESET] for three seconds.

All available radio stations are stored automatically. The first stored station is broadcast when 30 preset stations are stored.

Store FM radio stations manually

1. Tune to an FM radio station.
2. Press [PROG/PRESET] to activate program mode. "[P01]" is displayed.
3. Press [Skip ⏩] or [Tune ⏪] to allocate a number (1-30) to this radio station, then press [OK] to confirm.
4. Repeat steps 1-3 to program more stations.

[NOTE] To overwrite a programmed station, store another in its place.

Select a preset FM radio station

In FM mode, press [Skip ⏩] or [Tune ⏪] to select a preset number.

You may toggle stereo and mono sound in the menu while listening to FM radio.

Use FM menu

1. In FM mode, press [MENU (MODE)] to enter the menu setting.
2. Press [Skip ⏩] or [Tune ⏪] to select and enter corresponding menu options.

Menu options:

• [SCAN SET]: Access the scan setting.
• [MODE]: Select STEREO or MONO.
• [DBB]: Select DBB2, DBB1, or OFF.
• [RDS INFO]: Display the RDS information.
• [DIM]: Adjust display brightness (HIGH/MED/LOW/OFF).
• [SYSTEM]: Access system settings.

Display RDS information

RDS (Radio Data System) provides additional information such as station name, program type, etc.

1. Tune to an FM radio station.
2. Toggle the [INFO] menu to display various RDS information (if available).

Presetting stations to favorite radio stations

You can preset up to three favorite stations to the FAVORITE RADIO STATIONS (1-3) buttons. Assign one FM program for each button.

1. Press [FM button] repeatedly to turn on the radio function and select the band "FM".
2. Tune to the station you want to preset.
3. Press and hold button [1], [2], or [3] until "FAVRT 1/2/3" shows on the screen.

To change the preset station

Repeat steps 1-3. The preset station on the button will be replaced by the new one.

[NOTE] To prevent the preset from being changed by mistake, do not hold down the button. If you do, the preset will be replaced by the currently tuned station.

6 Play from Bluetooth

Play from classic bluetooth

[NOTE] Compatibility with all Bluetooth devices is not guaranteed. Obstacles between the unit and device can reduce operational range. Effective range is approximately 10 meters (30 feet). The unit can memorize up to 8 previously connected Bluetooth devices.

1. Press [CD/BT button] on the main unit to select the Bluetooth source. "[NO BT]" (Bluetooth) is displayed.
2. On your device (supporting A2DP), enable Bluetooth and search for Bluetooth devices that can be paired (refer to the device's user manual). Select 'Philips TAZ5000' on your Bluetooth-enabled device.
3. After successful pairing and connection, "[BT]" is displayed and you will hear a prompt sound from the unit.
4. Play audio from the connected device. Audio streams from your Bluetooth-enabled device to this product.

To disconnect the Bluetooth-enabled device

• Deactivate Bluetooth on your device.
• Press and hold [CD/BT button] for 3 seconds to enter pairing mode.

Use BT menu

1. In BT mode, press [MENU (MODE)] to enter the menu setting.
2. Press [Skip ⏩] or [Tune ⏪] to select and enter corresponding menu options.

Menu options:

• [BT PAIR]: Access the pair state.
• [DBB]: Select DBB2, DBB1, or OFF.
• [DIM]: Adjust display brightness (HIGH/MED/LOW/OFF).
• [SYSTEM]: Access system settings.

Play from Auracast

[NOTE] Auracast is coming soon; the latest firmware of the device needs to be installed to use this feature.

Download and install the Philips Entertainment app. Follow the app's instructions for a software upgrade.

You can play music on this CD Soundmachine from multiple Auracast-compatible transmitting devices around your house.

1. Short press the "CD/BT" button in BT mode to switch to Auracast source. "[AURACAST RCV]" is displayed.
2. The unit will automatically search for nearby Auracast broadcasts and find free broadcast channels.
3. Play your favorite music from the Auracast-enabled mobile device or dongle to the unit.

To quit Auracast

Change to other sources and leave Auracast. Deactivate Auracast broadcast on your mobile device or dongle.

Scan Auracast broadcast channel

Press and hold [PROG/PRESET] for more than 3 seconds. The unit scans all Auracast broadcasts automatically. After scanning, the first available Auracast channel is broadcast.

Select Auracast broadcast channel

Press [Skip ⏪⏩] to select an Auracast broadcast channel.

7 Play from USB

[NOTE] Make sure the USB device contains playable audio content. Supports FAT16/FAT32 file format. Supports up to 128GB.

1. Press [USB/AUX IN button] repeatedly to select the USB mode.
2. Insert a USB device into the socket.
3. Play starts automatically. If not, press [Play/Pause button ⏸️].

Use USB menu

1. In USB mode, press [MENU (MODE)] to enter the menu setting.
2. Press [Skip ⏩] or [Tune ⏪] to select and enter corresponding menu options.

Menu options:

• [MODE]: Select REP ONE, REP ALL, SHUF ON/OFF.
• [DBB]: Select DBB2, DBB1, or OFF.
• [DIM]: Adjust display brightness (HIGH/MED/LOW/OFF).
• [SYSTEM]: Access system settings.

8 Listen to an external device

You can listen to an external device through this unit with an audio cable.

1. Press [USB/AUX IN button] repeatedly to select AUDIO IN source.
2. Connect an audio cable (3.5mm, not supplied) to the AUDIO-IN socket on the product.
3. Start to play the device.

[NOTE] The AUDIO-IN socket is not for headphones.

Use AUDIO IN menu

1. In AUDIO IN mode, press [MENU (MODE)] to enter the menu setting.
2. Press [Skip ⏩] or [Tune ⏪] to select and enter corresponding menu options.

Menu options:

• [DBB]: Select DBB2, DBB1, or OFF.
• [DIM]: Adjust display brightness (HIGH/MED/LOW/OFF).
• [SYSTEM]: Access system settings.

9 Connect with headphone

To listen through headphones, connect headphones to the [headphones jack ?].

10 Product Specification

[NOTE] Product information is subject to change without prior notice.

Bluetooth

• Bluetooth profiles: A2DP, AVRCP
• Bluetooth version: V 5.4
• Bluetooth frequency range / Transmitter power (EIRP): 2402~2480MHz, < 9dBm

CD soundmachine

• Power: 100-240V~, 50/60 Hz (AC Input)
• Rated output power: Total 4W (RMS)
• Acoustic frequency response: 125Hz-20KHz
• Speaker driver: 2 x 3" full range, 4Ω
• Operation power consumption: 12 W
• Standby power consumption: < 0.5W (display off)
• AUDIO IN input level: 500mV
• Tuner frequency range: FM 87.5-108MHz
• Dimensions (W x H x D): 310 x 128 x 210 mm (Main unit)
• Weight: 1.25 kg (Main unit)

Supported audio formats

• USB playback: Type A, USB Direct 2.0, MSC file format, FAT16/32.

Disc

• Laser Type: semiconductor
• Disc Diameter: 12cm/8cm
• Support Disc: CD-DA, CD-R, CD-RW, CD-MP3
• Audio DAC: 24Bits/44.1kHz
• Total Harmonic Distortion: < 1%
• Frequency Response: 125-16000Hz(-3dB)
• S/N Ratio: > 55 dBA

Battery life

• CD playback: Approx. 13 hours
• FM reception: Approx. 35 hours
• USB device playback: Approx. 24 hours
• BT playback: Approx. 35 hours
• AUX playback: Approx. 30 hours

Note on battery life variability based on unit conditions or operating conditions.

USB playability information

• Supported USB formats: FAT12, FAT16, FAT32 (sector size: 512 bytes), MP3 bit rate (48-320 Kbps, VBR), WAV bit rate (up to 1536 kbps), directory nesting (max 8 levels), albums/folders (max 99), tracks/titles (max 999), filename (Unicode UTF8, max 32 bytes).
• Unsupported USB formats: Empty albums, unsupported file formats (e.g., .doc, .dif), WMA, AAC, WAV, PCM (DRM protected WMA), WMA lossless.

Compatible USB devices

• USB flash memory (USB2.0 or USB1.1)
• USB flash players (USB2.0 or USB1.1)
• Memory cards (require a card reader)

Supported MP3 disc formats

• ISO9660, Joliet
• Maximum title number: 128
• Maximum album number: 99
• Supported sampling frequencies: 44.1 kHz, 48 kHz
• Supported Bit-rates: 48~256(kbps), variable bit rates

11 Troubleshooting

[WARNING] Never remove the casing of this device. Do not attempt self-repair.

Check the Philips website (www.philips.com/support) for support if problems persist. Have model and serial number ready.

No power

• Ensure AC power cord is connected properly.
• Ensure AC outlet has power.
• Unit switches off automatically after 15 minutes of inactivity (power-saving feature).

No sound or poor sound

• Adjust the volume.
• Check speaker connections.
• Ensure speaker wires are properly clamped.

No response from the unit

• Disconnect and reconnect the AC power plug, then turn on the unit.
• Unit switches off automatically after 15 minutes of inactivity (power-saving feature).

No disc detected

• Insert disc correctly.
• Check if the disc is inserted upside down.
• Wait for condensation at the lens to clear.
• Replace or clean the disc.
• Use a finalized CD or correct format disc.

Cannot display some files in USB device

• The number of folders or files may exceed the limit. This is not a malfunction.
• File formats are not supported.

USB device not supported

• The USB device may be incompatible with the unit. Try another device.

Poor radio reception

• Increase distance between the unit and interference sources (e.g., TV).
• Fully extend the radio antenna.
• Connect an outdoor radio antenna. A replacement antenna cable may be purchased.

Music playback is unavailable on this unit even after successful Bluetooth connection.

• The device cannot play music wirelessly through this unit.

The audio quality is poor after connection with a Bluetooth-enabled device.

• Bluetooth reception may be poor. Move the device closer to the unit or remove obstacles.

Bluetooth cannot be connected with this unit.

• The device may not support required Bluetooth profiles.
• Ensure the device's Bluetooth function is enabled. Refer to the device's user manual.
• Ensure the unit is in pairing mode.
• If the unit is already connected to another Bluetooth device, disconnect that device first.

The paired mobile device connects and disconnects constantly.

• Bluetooth reception may be poor. Move the device closer or remove obstacles.
• Some mobile phones may connect/disconnect during calls; this does not indicate a unit malfunction.

12 Trademarks

AURACAST™ word mark and logos are trademarks owned by Bluetooth SIG, Inc. Use by MMD Hong Kong Holding Limited is under license. Other trademarks are those of their respective owners.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Use by MMD Hong Kong Holding Limited is under license.

Unauthorized copying of copy-protected material (programs, files, broadcasts, sound recordings) may infringe copyrights and constitute a criminal offense. This equipment should not be used for such purposes.