RICOH

Changes to V1.21

Improved Contents

• Improved stability of Shake Reduction operation.
• Improved stability for general performance.

*The original special power-off graphic screen remains even after a firmware update in RICOH GR III Urban Edition.

This update also including all Updates before

History of Firmware Updates

Changes to V1.20

Added the following enhanced features

• [Negative-Film] has been added to [Image control].
• The total number of shots or FW version display can be selected on the power off screen.
• Power can be turned off remotely from ImageSync (version 2.1.15 or later).

*For ImageSync details click here

Improved Contents

• Improved stability for general performance.

*The original special power-off graphic screen remains even after a firmware update in RICOH GR III Urban Edition.

Changes to V1.11

Improved Contents

• Improved stability of SD card operation.
• Corrected a problem when using the remote shooting function with the ImageSync application.

*The original special power-off graphic screen remains even after a firmware update in RICOH GR III Urban Edition.

Changes to V1.10

Added the following enhanced features

• [Snap Distance Priority] is added in the “Shooting Settings” menu. By selecting the snap shooting distance and DOF in advance, just by selecting this mode you can instantly recall this setting. When the DOF 3 is selected, the aperture is set to nearly pan focus so you can release the shutter right away.
• "3.5m” has been added to the Snap Focus Distance.
• [Auto-area AF (Center)] is added to the options for [Focus] in the “Focus Settings” menu. By selecting this mode, this will automatically focus mainly the center area (nine areas), which is useful not to focus the surroundings such as the ground in front.
• "Enable AF” has been added to the Shutter Button Setting. This setting will let you lock the AF only when half pressing the shutter button.
• Long tapping on the playback screen can now recall the Playback Settings. Long tap the monitor during playback which activates the Playback Setting Menu.

For more details click here

Improved Contents

• When using the PEG image processing and editing function "Trimming", the ADJ display for aspect ratio selection is now aligned with the selected aspect ratio.
• In Select AF/Pinpoint AF, AF operation in dark areas has been improved.

*The original special power-off graphic screen remains even after a firmware update in RICOH GR IIIx Urban Edition.

Changes to V1.02 – 26.11.21

• Corrected --- In Ver. 1.01, there are rare cases of unstable operation.

Changes to V1.01 – 29.10.21

• Corrected --- Abnormal images are rarely displayed when the power is turned on.
• Corrected --- When the tele conversion lens (GT-2) is attached and set to MF, the focus position shifts when the power is repeatedly turned on and off.
• Improved stability for “Face/Eye Detection" autofocus performance.
• Improved stability for general performance.

Caution

• Only GRIIIx users are permitted to download the firmware update

Firmware Update Software for GR IIIx

How to check version

1. Turn ON the camera.
2. Press MENU button.
3. Operate 4-way button and display [About This Device] of [Setup menus].
4. Operate 4-way button and select [Firmware Info / Options] then press 4-way button right.
5. The firmware version for camera is displayed on the [Firmware Info / Options] screen.

Preparation of update

• GR IIIx camera body.
• Blank, formatted SD card. (formatted by GR IIIx) (32MB or more)
• Computer with a SD card slot.
• If the computer does not have a SD card slot, SD card reader / writer is needed.
• Fully charged battery (DB-110) or AC adapter kit K-AC166J.
• Be sure to use fully charged battery. If the camera turns off during updating due to lack of battery power, the camera will become inoperable. If this happens, a charge will be made for repairs even if within the warranty period.

Download and Updating Procedure

Download the updated firmware file

• For Windows/Mac: gr3x_v121 (27,655Kbytes) zip type

Updating Procedure

1. Provide a formatted SD memory card for the update software. The download file is self-extracting. The following file is extracted: fwdc243b.bin: This is the updated firmware. Copy the above Firmware file [fwdc243b.bin] to the root directory in the SD card.
2. Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
3. Insert the update SD card (prepared in step 1) into the camera and close card cover.
4. Turn the camera power on while pressing [Menu] button.
5. [Update the camera firmware] is displayed. Select [Execute] by 4-way button and press [OK] button.
6. The firmware update will start and [Updating] is displayed. Do not turn OFF the camera while updating.
7. When update is completed, “Update completed” will be displayed.
8. Turn OFF the camera and remove the SD card from camera. Confirm the version of firmware with above [How to check version].

[Caution]

When updating is finished, the update SD card still contains the Firmware file. If you want to use this card to take pictures, format the card by the camera to delete firmware file first.

Firmware Update Software for GR IIIx Software License Agreement

The customer (hereinafter "the user") shall verify the following items below related to the use of the licensed software supplied to the user by RICOH IMAGING COMPANY, LTD. The download starts when you press "I agree. Start download." on this software license agreement.

1. Definition of terms

• Licensed software: "Licensed software" means the captioned program in a format that the user can download from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD.
• Use: "Use" means the user downloading and retrieving the licensed software from the RICOH IMAGING COMPANY, LTD website or from a site empowered by RICOH IMAGING COMPANY, LTD.
• Designated machine: "Designated machine" means the single computer system set up in order for the user to use the licensed software.
• Reproduction: "Reproduction" means reproducing the licensed software on a storage device in the same format as the user downloaded or a different format.
• Modification: "Modification" means performing alternations or making additions to the licensed software or creating separate software that makes use of all or a portion of the licensed software.

2. Grant of license

RICOH IMAGING COMPANY, LTD grants a non-exclusive license to the user on the condition that the user uses the licensed software in accordance with the terms and conditions of this software license agreement. The user may only use the licensed software on the designated machine.

3. Reproduction of the licensed software

The user shall not reproduce the licensed software for purposes other than to save and backup the licensed software intended for use on the designated machine.

4. Modifying the licensed software

The user shall not modify or reverse engineer the licensed software for any reason.

5. Property rights and copyright

The copyright and other property rights for the licensed software and for reproductions of the licensed software belong to RICOH IMAGING COMPANY, LTD regardless of any reason. The user shall not remove the copyright notations from the licensed software or from reproductions of the licensed software.

6. Grant of sublicense

The user shall not transfer possession of the licensed software or reproductions of the licensed software to third parties, and the user shall not transfer the license nor grant a sublicense of the licensed software to third parties.

7. Agreement period

This software license agreement is effective on the day the user starts using the licensed software and is valid until the time the user stops use. Provided that, when the user has violated any portion of this software license agreement, RICOH IMAGING COMPANY, LTD may revoke the license granted to the user for the licensed software and terminate the software license agreement.

8. Obligations after termination

After the software license agreement is terminated, the user, at the user's own responsibility, shall dispose of the licensed software after rendering it into a state where it cannot be used by third parties, and dispose of reproductions and modifications of the licensed software, and all materials related to the licensed software.

9. Guarantee of the licensed software

RICOH IMAGING COMPANY, LTD shall not guarantee that the licensed software is suitable for the user's designated purposes, or that the licensed software is useful, or that this licensed software is free from defects, nor shall RICOH IMAGING COMPANY, LTD make any other guarantees related to the licensed software.

10. Exporting the licensed software

The user shall not directly or indirectly export all or a portion of the licensed software without obtaining the necessary permission from the Government of Japan or the governments of the relevant countries.

11. RICOH IMAGING COMPANY, LTD 's responsibilities

RICOH IMAGING COMPANY, LTD A assumes no responsibility under any circumstance for direct or indirect damage or damage from ripple effects that occurs from using the licensed software, for damage to data, programs, or other intangible properties, or for loss of usage benefits and lost profits.

12. Responsibility for employees

The user assumes all responsibility that the user's employees (those employees that the user has a responsibility to manage, or monitor based on an employment relationship) fully comprehend the obligations set forth in this software license agreement and faithfully fulfill those obligations.

For Windows/Macintosh

[I agree. Start download.] [I do not agree. Go back.]