UGREEN Wireless HDMI Extender CM506

Transmitter (TX)

Diagram:

The diagram shows the transmitter unit with the following labeled parts:

1. Pairing Indicator Light
2. Multi-function Button (Pairing/Reset)
3. Power Port
4. HDMI Output

Connection:

• USB-C Cable (A to C): Power Source
• HDMI Cable: Connect to devices (e.g., PC, SWITCH, PS4)

Pairing Information:

• Flashing Yellow Light: Pairing Mode
• Solid Light: Pairing Successful

Receiver (RX)

Diagram:

The diagram shows the receiver unit with the following labeled parts:

1. Power Port
2. HDMI Input
3. VGA Output
4. 3.5mm Audio
5. Reset
6. Pairing Indicator Light

Connection:

• USB-C Cable (A to C): Power Source
• HDMI Port: For video output
• VGA Port: For connecting other devices
• 3.5mm Audio Cable: For audio devices

Pairing Information:

• Solid Light: Pairing Successful

Connecting Devices:

• TV, Monitor, or Projector: With HDMI or VGA port
• Audio Device: With 3.5mm audio cable

Troubleshooting: Resetting Pairing

If pairing fails, follow these steps:

1. Press and hold the reset button on the receiver for 13 seconds.
2. Press and hold the reset button on the transmitter for 5 seconds.

Specifications

• Resolution: 1080P@60Hz
• Frequency Band: 5150-5250 MHz
• Transmission Distance: 50m (without obstruction)

Package Contents

• 1 x Transmitter
• 1 x Receiver
• 1 x HDMI Cable
• 1 x 3.5mm Audio Cable
• 2 x USB Cable (A to C)
• 1 x User Manual

Notes

• Avoid using in humid environments.
• Do not disassemble.
• Keep out of reach of children.