DVR/NVR Rear Panel Connections
This document outlines the various ports and connections found on the rear panel of a Digital Video Recorder (DVR) or Network Video Recorder (NVR).
Port Descriptions:
- 1 VIDEO IN: Multiple BNC connectors for video signal input.
- 2 AUDIO IN, RCA Connector: RCA connectors for audio signal input.
- 3 VGA Port: A VGA port for video output to a monitor.
- 4 Ground: A grounding terminal for electrical safety.
- 5 Power Input: A connector for the power supply.
- 6 RS-485 Port: An RS-485 port, typically used for PTZ (Pan-Tilt-Zoom) camera control.
- 7 Network Port: An Ethernet port for network connectivity.
- 8 USB Port: USB ports for connecting external devices like storage or a mouse.
- 9 HDMI Port: An HDMI port for high-definition video output.
- 10 AUDIO OUT, RCA Connector: RCA connectors for audio signal output.
Diagram Key:
The rear panel features multiple numbered ports, corresponding to the descriptions above:
- 1-16: Indicate multiple VIDEO IN ports.
- 2: AUDIO IN, RCA Connector.
- 3: VGA Port.
- 4: Ground terminal.
- 5: Power Input connector.
- 6: RS-485 Port.
- 7: Network Port (Ethernet).
- 8: USB Port.
- 9: HDMI Port.
- 10: AUDIO OUT, RCA Connector.