NamShub.Com
Yealink | UC & C Terminal, Video Collaboration, Conference Phone, IP Phone, Headsets & Video Conferencing
User Guide for CISCO models including: W90B IP DECT Phone, W90B, IP DECT Phone, DECT Phone, Phone
Resource
File Info : application/pdf, 1142 Pages, 7.65MB
DocumentDocumentCisco Cisco BroadWorks
Partner Configuration Guide
Yealink W90B IP DECT Phone
March 2021 Document Version 1.1
Cisco® Guide
Notification
BroadSoft Cisco BroadWorks has been renamed to Cisco Cisco BroadWorks. You will begin to see the Cisco name and company logo, along with the new product name on the software, documentation, and packaging. During the transition process, you may see both BroadSoft and Cisco brands and former product names. These products meet the same high standards and quality that both BroadSoft and Cisco are known for in the industry.
Copyright Notice
Copyright© 2021 Cisco Systems, Inc. All rights reserved
Trademarks
Any product names mentioned in this document may be trademarks or registered trademarks of Cisco or their respective companies and are hereby acknowledged.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 2 OF 1142
Document Revision History
V e r sion 1.1
1.2
Reason for Change
Introduced document for Yealink W90B IP DECT Phone version 130.85.0.15 validation w ith Cisco Cisco BroadWorks Release 22.0.
Edited and published document.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 3 OF 1142
Table of Contents
1 Overview ................................................................................................................... 7
2 Interoperability Status................................................................................................ 8
2.1 Verified Versions....................................................................................................... 8 2.2 Interface Capabilities Supported.................................................................................. 9
2.2.1 SIP Interface Capabilities.................................................................................... 9 2.2.2 Other Interface Capabilities ............................................................................... 14 2.3 Known Issues......................................................................................................... 17 3 Cisco BroadWorks Configuration............................................................................. 18
3.1 Cisco BroadWorks Device Profile Type Configuration................................................... 18 3.2 Cisco BroadWorks Configuration Steps...................................................................... 19 4 W90B IP DECT PHONE Configuration....................................................................... 20
4.1 Configuration Method .............................................................................................. 20 4.2 System Level Configuration...................................................................................... 20 4.3 Subscriber Level Configuration.................................................................................. 21 4.4 SIP Advanced Feature Configuration......................................................................... 22
4.4.1 Shared Call Appearance Configuration............................................................... 22 4.4.2 Busy Lamp Field Configuration.......................................................................... 25 4.4.3 Feature Key Synchronization Configuration ......................................................... 25 4.4.4 Call Center Feature Configuration...................................................................... 25 4.4.5 Call Recording Feature Configuration................................................................. 26 4.4.6 Security Classification Feature Configuration....................................................... 26 4.4.7 Emergency Call Configuration........................................................................... 26 4.4.8 Advice of Charge Configuration ......................................................................... 26 4.4.9 PANI header support Configuration.................................................................... 26 4.5 Xtended Services Interface Feature Configuration ....................................................... 26 4.5.1 Cisco BroadWorks User Service Configuration .................................................... 29 4.5.2 Cisco BroadWorks Directory Configuration.......................................................... 29 4.5.3 Cisco BroadWorks Call Logs Configuration ......................................................... 31 4.5.4 Cisco BroadWorks Call Park Configuration.......................................................... 32 4.6 Instant Message and Presence Configuration ............................................................. 33 4.7 Connected Line Presentation on UPDATE or Re-Invite................................................. 33 5 Device Management................................................................................................. 34
5.1 Device Management Capabilities Supported............................................................... 34 5.2 Device Management Configuration............................................................................ 35
5.2.1 Configure Cisco BroadWorks Tags .................................................................... 36 5.2.2 Configure Cisco BroadWorks Device Profile Type................................................ 39 5.2.3 Create Device Profile Instance........................................................................... 46 5.2.4 Configure Cisco BroadWorks User..................................................................... 48 5.2.5 Configure Edge Device..................................................................................... 48
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 4 OF 1142
5.2.6 Configure Yealink W90B IP DECT PHONE......................................................... 48 5.3 Upgrade from Previous CPE Kits............................................................................... 57 Appendix A: Reference W90B Configuration Files.......................................................... 57 Appendix B: %TIMEZONENAME% Values...................................................................1139 References .................................................................................................................1142
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 5 OF 1142
Table of Figures
Figure 1 Device Identity/Profile Type....................................................................................... 19 Figure 2 Shared Call Appearance Configuration....................................................................... 23 Figure 3 Xtended Services Interface Configuration ................................................................... 27 Figure 4 Xtended Services Platform Account Configuration........................................................ 28 Figure 5 Xtended Services Platform Configuration.................................................................... 28 Figure 6 Call Logs Configuration............................................................................................ 31 Figure 7 Call Park Configuration ............................................................................................ 32 Figure 8 Connected Line Presentation on Update or Re-Invite.................................................... 33 Figure 9 System Default Tag Settings..................................................................................... 37 Figure 10 Device Type Specific Tag Settings ........................................................................... 38 Figure 11 Device Access FQDN ............................................................................................ 40 Figure 12 %BWMACADDRESS%.cfg File............................................................................... 43 Figure 13 Static File Settings ................................................................................................. 44 Figure 14 Device Profile Instance........................................................................................... 46 Figure 15 Device Profile Instance Custom Tags Override .......................................................... 47 Figure 16 Device Profile Instance Custom Tags Add................................................................. 47 Figure 17 Login Screen ........................................................................................................ 49 Figure 18 Auto Provision Screen............................................................................................ 50 Figure 19 Device Access FQDN ............................................................................................ 51 Figure 20 Default Device Profile Type..................................................................................... 52 Figure 21 Configure Advanced Options................................................................................... 53 Figure 22 Device Management Options Settings...................................................................... 54 Figure 23 Default y000000000130.cfg .................................................................................... 55
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 6 OF 1142
1 Overview
This guide describes the configuration procedures required for the Yealink W90B IP DECT Phone for interoperability with Cisco BroadWorks. This includes the following model:
Yealink W90B IP DECT
The W90B is an IP DECT Phone that uses the Session Initiation Protocol (SIP) to communicate with Cisco BroadWorks for call control.
This guide describes the specific configuration items that are important for use with Cisco BroadWorks. It does not describe the purpose and use of all configuration items on the W90B IP DECT Phone. For those details, see the Yealink W90B IP DECT Phone User Guide [1] supplied by Yealink.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 7 OF 1142
2 Interoperability Status
This section provides the known interoperability status of the Yealink W90B IP DECT PHONE with Cisco BroadWorks. This includes the version(s) tested, capabilities supported and known issues.
Interoperability testing validates that the device interfaces properly with Cisco BroadWorks via the SIP interface. Qualitative aspects of the device or device capabilities not affecting the SIP interface such as display features, performance, and audio qualities are not covered by interoperability testing. Requests for information and/or issues regarding these aspects should be directed to Yealink.
2.1 Verified Versions
The following table identifies the verified Yealink W90B IP DECT PHONE and Cisco BroadWorks versions and the month/year the testing occurred. If the device has undergone more than one test cycle, versions for each test cycle are listed, with the most recent listed first.
Compatible Versions in the following table identify specific W90B IP DECT PHONE versions which the partner has identified as compatible and should interface properly with Cisco BroadWorks. Generally, maintenance releases of the validated version are considered compatible and are not specifically listed here. For any questions concerning maintenance and compatible releases, contact Yealink.
NOTE: Interoperability testing is usually performed with the latest generally available (GA) device firmware/software and the latest GA Cisco BroadWorks release and service pack at the time the testing occurs. If there is a need to use a non-verified mix of Cisco BroadWorks and device software versions, customers can mitigate their risk by self-testing the combination themselves using the Cisco BroadWorks SIP Phone Interoperability Test Plan.
Verified Versions Date (m m /yyyy)
Cisco BroadWorks Re le as e
03/2021
Release 22.0
W90B IP DECT PHONE Verified Version
130.85.0.15
W90B IP DECT PHONE Com patible V e r sions
List any specific compatible versions
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 8 OF 1142
2.2 Interface Capabilities Supported
This section identifies interface capabilities that have been verified through testing as supported by Yealink W90B IP DECT PHONE.
The Supported column in the tables in this section identifies the Yealink W90B IP DECT PHONE's support for each of the items covered in the test plan, with the following designations:
Yes Test item is supported No Test item is not supported NA Test item is not applicable to the device type
NT Test item was not tested
Caveats and clarifications are identified in the Comments column.
2.2.1
SIP Interface Capabilities
The Yealink W90B IP DECT PHONE has completed interoperability testing with Cisco BroadWorks using the Cisco BroadWorks SIP Phone Interoperability Test Plan [5]. The results are summarized in the following table.
The Cisco BroadWorks test plan is composed of packages, each covering distinct interoperability areas, such as "Basic" call scenarios and "Redundancy" scenarios. Each package is composed of one or more test items, which in turn are composed of one or more test cases. The test plan exercises the SIP interface between the device and Cisco BroadWorks with the intent to ensure interoperability sufficient to support the Cisco BroadWorks feature set.
NOTE: DUT in the following table refers to the Device Under Test, which in this case is the Yealink W90B IP DECT PHONE.
Cisco BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package Bas ic
Test Plan Package Items Call Origination
Supported Yes
Call Termination
Yes
Session Audit
Yes
Session Timer
Yes
Ringback
Yes
Forked Dialog
Yes
181 Call Being Forw arded
Yes
Dial Plan
Yes
DTMF Inband
Yes
DTMF RFC 2833
Yes
DTMF DTMF Relay
Yes
Codec Negotiation
Yes
Codec Renegotiation
No
Com ments Not Tested
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 9 OF 1142
Cisco BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package
Cisco BroadWorks Se r vice s
Test Plan Package Items Third-Party Call Control Basic Third-Party Call Control Advanced Voice Message Deposit/Retrieval
Supported No No Yes
Message Waiting Indicator
Yes
Voice Portal Outcall
Yes
Advanced Alerting Ringing
No
Advanced Alerting Call Waiting
No
Advanced Alerting Ring Splash
Yes
Advanced Alerting Silent Alerting
Yes
Calling Line ID
Yes
Calling Line ID w ith Unicode
Yes
Characters
Connected Line ID
Yes
Connected Line ID w ith Unicode
Yes
Characters
Connected Line ID on UPDATE
Yes
Connected Line ID on Re-INVITE
Yes
Diversion Header
Yes
History-Info Header
Yes
Advice of Charge
No
Meet-Me Conferencing
Yes
Meet-Me Conferencing G722
Yes
Meet-Me Conferencing AMR-WB
No
Meet-Me Conference Opus
Yes
Collaborate Audio
Yes
Collaborate Audio G722
Yes
Collaborate Audio Opus
Yes
Call Decline Policy
No
DUT Services
Call Waiting
Yes
Call ControlServices
Call Hold
Yes
Call Transfer
Yes
Three-Way Calling
Yes
Netw ork-Based Conference
Yes
DUT Services
Register Authentication
Yes
Registration and
Authe ntication
Maximum Registration
Yes
Com ments Not Tested
Before answ er scenario is not supported.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 10 OF 1142
Cisco BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package
Test Plan Package Items
Supported
Minimum Registration
Yes
Invite Authentication
Yes
Re-Invite/Update Authentication
Yes
Refer Authentication
No
Device Authenticating Cisco
No
BroadWorks
DUT Services
Emergency Call
No
Em ergency Call
Emergency Call w ith Ringback
No
DUT Services P-
REGISTER w ith P-Access-Network- Yes
Access-Network-Info Info Header
DUT Services M is ce llaneous
INVITE w ith P-Access-Network-Info Yes Header
Do Not Disturb
Yes
Call Forw arding Always
Yes
Call Forw arding Always Diversion
No
Inhibitor
Anonymous Call
No
Anonymous Call Block
No
Remote Restart Via Notify
Yes
Advanced Phone
Busy Lamp Field
No
Services Busy
Lam p Field
Call Park Notification
No
Advanced Phone
Do Not Disturb
Yes
Services Feature
Key Synchronization, SUBSCRIBE for as-feature-event
Yes
Private Line
Do Not Disturb Ring Splash
Yes
Call Forw arding
Yes
Call Forw arding Always Ring Splash Yes
Call Forw arding Always Diversion
No
Inhibitor
Call Center Agent Logon/Logoff
No
Call Center Agent Unavailable Code No
Executive Call Filtering
No
Executive-Assistant Call Filtering
No
Executive-Assistant Diversion
No
Call Recording
No
Security Classification
No
Advanced Phone
Do Not Disturb
Yes
Services Feature
SUBSCRIBE for as-feature-event
Yes
Com ments Not Tested
check-sync.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 11 OF 1142
Cisco BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package
Key Synchronization, Shared Line
Test Plan Package Items Do Not Disturb Ring Splash Call Forw arding
Supported Yes Yes
Call Forw arding Always Ring Splash Yes
Call Forw arding Always Diversion
No
Inhibitor
Security Classification
No
Advanced Phone
Missed Calls Display Sync
Yes
Services Missed
Calls Display
Synchronization
Advanced Phone
Line-Seize
No
Services Shared
Call Appearance
Call-Info/Lamp Management
Yes
using Call Info
Public Hold
Yes
Private Hold
Yes
Hybrid Key System
No
Multiple Call Arrangement
Yes
Bridge Active Line
Yes
Bridge Active Line Silent Monitor
No
Call Park Notification
Yes
Advanced Phone
Call Park Notification
Yes
Services Call Park
Notification
Advanced Phone
Hold Reminder
No
Services Call
Ce nte r
Call Information
No
Hoteling Event
No
Status Event
No
Disposition Code
No
Emergency Escalation
No
Customer Originated Trace
No
Advanced Phone
Pause/Resume
No
Services Call
Recording Controls Start/Stop
No
Record Local Conference
No
Record Netw ork Conference
No
Advanced Phone
Basic Call
No
Services Call
Recording Video
Record Local Conference
No
Advanced Phone
Services Security Clas s ification
Record Netw ork Conference
No
Security Classification
No
Netw ork-Based Conference Creator No
Com ments
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 12 OF 1142
Cisco BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package Advanced Phone Services Conference Event
Re dundancy
Test Plan Package Items
Netw ork-Based Conference Participant Meet-Me Conference Participant
DNS SRV Lookup
Supported No
No Yes
Register Failover/Failback
Yes
Invite Failover/Failback
Yes
Bye Failover
Yes
SBC/ALG - Basic
Register
Yes
Outgoing Invite
Yes
Incoming Invite
Yes
SBC/ALG
Register Failover/Failback
Yes
Failove r /Failback
Invite Failover/Failback
Yes
Video Basic Video Call Origination
NA
Calls
Call Termination
NA
Call Hold
NA
Call Waiting
NA
Call Transfer
NA
Video Cisco
Auto Attendant
NA
BroadWorks Video
Se r vice s
Auto Attendant HD
NA
Voice Messaging
NA
Voice Messaging HD
NA
Custom Ringback
NA
Video Cisco
Netw ork-based Conference
NA
BroadWorks Video
Confe rence
Netw ork-based Conference HD
NA
Collaborate Video
NA
TCP
Collaborate Video HD
NA
Register
Yes
Outgoing Invite
Yes
Incoming Invite
Yes
IPV6
Call Origination
No
Call Termination
No
Session Audit
No
Ringback
No
Codec Negotiation/Renegotiation
No
Voice Message Deposit/Retrieval
No
Com ments DNS SRV lookup using contact header is not tested.
Not Tested Not Tested Not Tested Not Tested Not Tested Not Tested
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 13 OF 1142
Cisco BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package
Test Plan Package Items
Supported
Call Control
No
Registration w ith Authentication
No
Busy Lamp Field
No
Redundancy
No
SBC
No
Video
No
Dual Stack w ith Alternate
No
Connectivity
Com ments Not Tested Not Tested Not Tested Not Tested Not Tested
2.2.2
Other Interface Capabilities
The Yealink W90B IP DECT PHONE may have implemented support for the following:
Cisco BroadWorks Xtended Services Interface (Xsi)
Extensible Messaging and Presence Protocol (XMPP) (BroadCloud/Cisco BroadWorks Collaborate Instant Messaging and Presence [IM&P])
Support for these interfaces is demonstrated by completing the Cisco BroadWorks SIP Phone Functional Test Plan [9]. Support for these interfaces is summarized in the following table.
Cisco BroadWorks Xtended Services Interface (Xsi) and BroadCloud IM&P Support Table
Inte r face
Xsi Features Authentication
Fe atur e
Authenticate w ith SIP Credentials
Authenticate w ith Cisco BroadWorks User Login Credentials
Authenticate w ith Cisco BroadWorks User Directory Number
Supported Yes Yes
No
Com ments
Reuse Authorization Header
Yes
Xsi Features User Service
Conf iguration
Remote Office
Yes
Cisco BroadWorks Anywhere
Yes
Handle Invalid Phone Number is not supported
Handle Invalid Phone Number is not tested; Enable Click To Dial Alerting for All Locations and also not support to display Alert all locations for Click-to-Dial calls.
Simultaneous Ringing
Yes
Handle Invalid Phone Number
is not tested; Does not
support to display Do not ring
my Simultaneous Ring
Numbers if I'm already on a
call.
Caller ID Blocking
Yes
Call Forw arding Always Call Forw arding Busy
No
Not Tested.
No
Not Tested.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 14 OF 1142
Cisco BroadWorks Xtended Services Interface (Xsi) and BroadCloud IM&P Support Table
Inte r face
Fe atur e
Supported Com ments
Call Forw arding No Answer
No
Not Tested.
Do Not Disturb
No
Not Tested.
Xsi Features Directories
Enterprise Directory
Yes
Enterprise Common Phone List
Yes
Group Directory
Yes
Call Using Group Directory
Search is not supported
Group Common Phone List
Yes
Personal Phone List
Yes
Search All Directories
No
Xsi Features
Placed Calls
Yes
Call Logs
Received Calls
Yes
Missed Calls
Yes
Delete Missed Call is not
supported
All Calls
Yes
Delete All calls is not
supported
Sort by Name
No
Xsi Features
View Messages
No
Visual Voice Mail
Listen to Audio Message
No
Watch Video Message
No
Mark Message Read/Unread
No
Delete Message
No
Mark All Messages Read/Unread
No
Xsi Features
Register/Deregister for Push
No
Push Notification
Notif ic ations
Incoming Call via Push Notification
No
Call Update via Push Notification
No
Incoming Call via Push Notification; No Second Incoming Call
MWI via Push Notification
No
Ring Splash via Push Notification
No
Xsi Features
Call Record Mode Get
No
Call Recording
Conf igurations
Set Record Mode
No
Set Play Call Recording to Start and No Stop Announcement
Set Record Voice Messaging
No
Set Pause and Resume Notification No
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 15 OF 1142
Cisco BroadWorks Xtended Services Interface (Xsi) and BroadCloud IM&P Support Table
Inte r face
Fe atur e
Supported Com ments
Set Recording Notification
No
Xsi Features
Record Mode set to Never
No
Call Recording
Controls
Record Mode set to Alw ays
No
Record Mode set to Alw ays with
No
Pause/Resume
Start Recording Mid-Call w ith
No
Record Mode set to On Demand
Start Recording During Call Setup
No
w ith Record Mode set to On
Demand
Perform User Initiated Start w ith
No
Record Mode set to On Demand
Perf orm Mid-Call Start Recording
No
after Placing Call on Hold
Perf orm Mid-Call Change to Call
No
Recording Mode
Record Local Three-Way Call
No
Record Netw ork Three-Way Call
No
XMPP Features
Contacts
No
Contact/Buddy List
Favorites
No
Groups
No
Non-XMPP Contacts
No
Conf erenc es
No
XMPP Features
Login Invisible
No
Presence
Presence State
No
Presence Status
No
Contact's Presence State
No
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 16 OF 1142
2.3 Known Issues
This section lists the known interoperability issues between Cisco BroadWorks and specific partner release(s). Issues identified during interoperability testing and known issues identified in the field are listed.
The following table provides a description of each issue and, where possible, identifies a workaround. The verified partner device versions are listed with an "X" indicating that the issue occurs in the specific release. The issues identified are device deficiencies or bugs, and are typically not Cisco BroadWorks release dependent.
The Issue Number is a tracking number for the issue. If it is a Yealink issue, the issue number is from Yealink's tracking system. If it is a Cisco BroadWorks issue, the issue number is from Cisco BroadSoft's tracking system.
For more information on any issues related to the particular partner device release, see the partner release notes.
Issue Num ber
Issue Description
Partne r Version
130.85.0.15
No issues identified.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 17 OF 1142
3 Cisco BroadWorks Configuration
This section identifies the required Cisco BroadWorks device profile type for the Yealink W90B IP DECT PHONE as well as any other unique Cisco BroadWorks configuration required for interoperability with the W90B IP DECT PHONE.
3.1 Cisco BroadWorks Device Profile Type Configuration
This section identifies the device profile type to use when deploying the Yealink W90B IP DECT PHONE with Cisco BroadWorks.
Create a device profile type for the Yealink W90B IP DECT PHONE with settings as shown in the following example. For an explanation of the profile parameters, see the Cisco BroadWork s Device Management Configuration Guide [2].
The device profile type shown provides the Number of Ports (number of SIP lines) setting for Yealink W90B Phone. For W90B IP DECT PHONE, create a new device profile type and set the Number of Ports to match the available number of SIP lines per model according to the following table.
Model
Num ber of Lines
W90B
250 SIP accounts, 0 line keys
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 18 OF 1142
Figure 1 Device Identity/Profile Type
3.2 Cisco BroadWorks Configuration Steps
There are no additional Cisco BroadWorks configuration steps are required.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 19 OF 1142
4 W90B IP DECT PHONE Configuration
This section describes the configuration settings required for the W90B IP DECT PHONE integration with Cisco BroadWorks, primarily focusing on the SIP interface configuration. The W90B IP DECT PHONE configuration settings identified in this section have been derived and verified through interoperability testing with Cisco BroadWorks. For configuration details not covered in this section, see the Yealink W90B IP DECT PHONE User Guide [1].
4.1 Configuration Method
The capabilities of the W90B IP DECT PHONE have been verified for use with Cisco BroadWorks based on the settings described in the following table. For more information on the meaning, purpose, and applicability of the individual configuration items see the Yealink W90B IP DECT PHONE User Guide [1].
Configuration Files
Files Provided by Partner
Le ve l
De s cr iption
<MACADDRESS>.cfg
device-specific configuration file
Device specific account information file.
4.2 System Level Configuration
This section describes system-wide configuration items that are generally required for each W90B IP DECT PHONE to work with Cisco BroadWorks. Subscriber-specific settings are described in the next section.
Ste p
Com mand
System Configuration Items y0000000000<xx>.cfg
Step 1
Set SIP Proxy/Domain.
template.1.sip_server.1.address = as.Cisco BroadWorks.net
template.1.sip_server.1.port = 5060 account.1.sip_server_type = 2
Step 2 Step 3
Set Outbound Proxy. template.1.outbound.enable = 1 template.1.outbound.1.address = sbc.Cisco BroadWorks.net template.1.outbound.1.port = 5060
Set SIP Timers. sip.timer_t1 = 0.5 sip.timer_t2 = 4 sip.timer_t4 = 5
Pur pos e
Set the W90B IP DECT PHONE SIP server to the Fully Qualified Domain Name (FQDN) for the Cisco BroadWorks Application Server cluster.
The domain must match the domain configured for the Cisco BroadWorks subscriber's line/port domain. Set the SIP server type of W90B:
Def ault=0 BroadSof t=2
Set the Outbound Proxy to the session border controller (SBC) if one is deployed betw een the W90B IP DECT PHONE and Cisco BroadWorks.
If there are redundant SBCs, set it to the FQDN for the SBC cluster.
The SIP timers should be set to levels short enough to support a timely failover w hen there is no server response.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 20 OF 1142
Ste p
Com mand
System Configuration Items y0000000000<xx>.cfg
Step 4 Step 5 Step 6
Step 7 Step 8 Step 9
Set Register Expire Timer. template.1.sip_server.1.expires = 3600
Enable reliable response. account.1.100rel_enable = 1
Enable Session Timer. account.1.session_timer.enable = 1 account.1.session_timer.expires = 300 account.1.session_timer.refresher = 1
Enable Call Waiting. call_waiting.enable = 1 call_waiting.tone = 1
Enable MWI. account.1.subscribe_mwi = 0 account.1.subscribe_mwi_expires =3600
Enable negotiated DTMF type. account.1.dtmf.type = 1
Step 10
Select Transport Type.
template.1.sip_server.1.transport _type = 0
Enable Feature Key Sync. features.feature_key_sync.enable= 1
Pur pos e
Set the registration period.
Reliable provisional response (PRACK) should be enabled.
Set the W90B IP DECT PHONE to enable Session Timer. Session Refresher: 0 = uac 1 = uas
Set the W90B IP DECT PHONE series to enable Call Waiting and Call Waiting Tone.
MWI: Solicited w hen setting SubscribeMWI = 1. MWI: Not solicited w hen setting SubscribeMWI = 0.
Set the W90B IP DECT PHONE to enable inband or RFC 2833 negotiated DTMF.
Set the SIP transport: Transport = 0 (UDP) Transport = 1 (TCP) Transport = 2 (TLS) (except T18P) Transport = 3 (DNS-SRV) (except T80P)
Enable Feature Key Sync: 1 = Enabled 0 = Disabled
4.3 Subscriber Level Configuration
This section identifies the device-specific parameters, including registration and authentication. These settings must be unique across devices to be matched with the settings for a Cisco BroadWorks subscriber.
Provisioning a subscriber to register with Cisco BroadWorks allows calls to terminate to the subscriber's line. Registration requires that a unique address of record (AoR) is provisioned on Cisco BroadWorks and the phone; provisioning an AoR on Cisco
BroadWorks consists of setting the line/port parameter to a unique value within the Application Server cluster.
Ste p
Com mand
Pur pos e
Subs criber parameters for the <MACADDRESS>.cfg
Step 1
Enable line 1 to be used. Example: account.1.enable = 1
Enable a line of the W90B IP DECT PHONE to be used.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 21 OF 1142
Ste p
Com mand
Subs criber parameters for the <MACADDRESS>.cfg
Step 2 Step 3
Configure display name for a line. Example: account.1.display_name = Joe
S]=et Register User ID for a line. Example: account.1.user_name = 2405551111
Step 4 Step 5
Enable SIP Authentication for a line. Example: account.1.auth_name = 2405551111 account.1.password = 123456
Configure Network Phonebook. account.1.xsi.host = xsp1.iop1.broad works.net account.1.xsi.user = 2413333601@as.iop1. Cisco BroadWorks.net account.1.xsi.password = yealink
Pur pos e
For the line, configure the name to be displayed on the device.
The register user ID must correspond w ith the line/port setting on Cisco BroadWorks.
If the Authentication service is configured on Cisco BroadWorks, these parameters must be configured to match the Cisco BroadWorks settings.
This configures the phone to use the Cisco BroadWorks Xsi interface to retrieve the group phone directory. Host: This is the identity of the Cisco BroadWorks Xsp server/cluster address and relevant xsi-actions parameters. User: This is the Cisco BroadWorks user's login name. Passw ord: This is the Cisco BroadWorks user's login passw ord.
4.4 SIP Advanced Feature Configuration
This section provides configuration instructions for advanced SIP features supported by the phone including but not limited to Shared Call Appearance, Busy Lamp Field, Feature Key Synchronization, Call Center, and Emergency Call.
4.4.1
Shared Call Appearance Configuration
The Shared Call Appearance (SCA) feature allows the administrator to add multiple locations to a given line. Any of the locations can be used to originate or receive calls.
When a call comes in to an idle line, all the provisioned locations for that line are alerted. The first location to answer the call is connected to the originator. If the line is already active in a call, only the active location is alerted.
A subscriber can originate calls from any of the configured locations. All other locations are unable to originate calls until all calls are released.
It is recommended that the phone number plus an index (<phoneNumber>_<index>) is used when provisioning the unique address of record (AoR) for each shared line. For example: 2405551111_2. If a phone number does not exist, the MAC addres s plus an index could be used (<macAddress>_<index>).
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 22 OF 1142
Subscriber Bob's Profile Configuration
Line/Port:/AoR 2405551111_1 Auth UserID: bobsmith Auth Password: bobs
Subscriber Joe's Profile Configuration
Line/Port:/AoR 2405552222_1 Auth UserID: joebrown Auth Password: joeb
Shared Call Appearance Configuration
Joe's 2nd Line Line/Port:/AoR 2405552222_2
Application Server
Shared Call Appearance Configuration
Bob's 2nd Line Line/Port:/AoR 2405551111_2
Joe's Line Bob's Line
Bob's Phone
Joe's Phone
Figure 2 Shared Call Appearance Configuration
Figure 2 shows that Bob and Joe each have two lines and that Bob shares a line with Joe and Joe shares a line with Bob. The figure also shows the applicable Subscriber Profile and Shared Call Appearance Configuration data for subscribers Bob and Joe.
When Bob (2405551111) is called, Bob's first line and Joe's second line will ring. When Joe (2405552222) is called, Joe's first line and Bob's second line will ring.
The following steps show how to configure both phones for this Shared Call Appearance configuration.
For configurations of SCA for the device, see the example in the following section.
4.4.1.1
Bob's Phone Configuration MAC.cfg
This is the SCA configurations as specified in MAC.cfg, that is, 0015651130dc.cfg where "0015651130dc" is the MAC address of the SIP phone.
The following steps are used to configure line 1 for Bob's phone. This line rings when Bob is called, so it has Bob's authentication information.
Ste p
Com mand
Pur pos e
Step 1 Step 2
Configure line as shared. account.1.shared_line = 1; Set Register User ID. Example: account.1.user_name = 2405551111_1;
Configure the line as "shared" (as opposed to "private").
The register user ID must correspond w ith the line/port setting on Cisco BroadWorks.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 23 OF 1142
Ste p Step 3
Step 4
Com mand Enable SIP Authentication. Example: account.1.auth_name = bobsmith; account.1.password = bobs;
Configure display name. Example: account.1.display_name = Bob Smith;
Pur pos e
If the Authentication service is configured on Cisco BroadWorks, these parameters must be configured to match the Cisco BroadWorks settings.
This line rings w hen Bob is called, so it has Bob's authentication information.
Configure the name to be displayed on the device for this line.
The following steps are used to configure line 2 for Bob's phone. This line rings when Joe is called, so it has Joe's authentication information.
Ste p
Com mand
Pur pos e
Step 1 Step 2 Step 3
Configure line as shared. account.2.shared_line = 1;
Set Register User ID. Example: account.2.user_name = 2405551111_2; Enable SIP Authentication. Example: account.2.auth_name = joebrown; account.2.password = joeb;
Configure the line as "shared" (as opposed to "private").
The register user ID must correspond w ith the line/port setting on Cisco BroadWorks.
If the Authentication service is configured on Cisco BroadWorks, these parameters must be configured to match the Cisco BroadWorks settings.
This line rings w hen Joe is called, so it has Joe's authentication information.
Step 4
Configure display name. Example: account.2.display_name = Joe Brown;
Configure the name to be
displayed on the device for this line.
4.4.1.2
Joe's Phone Configuration MAC.cfg
The following steps are used to configure line 1 for Joe's phone. This line rings when Joe is called, so it has Joe's authentication information.
Ste p
Com mand
Pur pos e
Step 1 Step 2 Step 3
Configure line as shared. account.1.shared_line = 1;
Set Register User ID. Example: account.1.user_name = 2405552222_1; Enable SIP Authentication. Example: account.1.Auth_Name = joebrown; account.1.password = joeb;
Configure the line as "shared" (as opposed to "private").
The register user ID must correspond w ith the line/port setting on Cisco BroadWorks.
If the Authentication service is configured on Cisco BroadWorks, these parameters must be configured to match the Cisco BroadWorks settings.
This line rings w hen Joe is called, so it has Joe's authentication information.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 24 OF 1142
Ste p Step 4
Com mand
Configure display name. Example: account.1.Display_Name = Joe Brown;
Pur pos e
Configure the name to be displayed on the device for this line.
The following steps are used to configure line 2 for Joe's phone. This line rings when Bob is called, so it has Bob's authentication information.
Ste p
Com mand
Pur pos e
Step 1 Step 2 Step 3
Configure line as shared. account.2.shared_line = 1;
Set Register User ID. Example: account.2.user_name = 2405552222_2; Enable SIP Authentication. Example: account.2.Auth_Name = bobsmith; account.2.password password = bobs;
Configure the line as "shared" (as opposed to "private").
The register user ID must correspond w ith the line/port setting on Cisco BroadWorks.
If the Authentication service is configured on Cisco BroadWorks, these parameters must be configured to match the Cisco BroadWorks settings.
This line rings w hen Bob is called, so it has Bob's authentication information.
Step 4
Configure display name. Example: account.2.Display_Name = Bob Smith;
Configure the name to be displayed on the device for this line.
4.4.1.3 Hybrid Key System Configuration Yealink W90B IP DECT PHONE does not support Hybrid Key System.
4.4.2 Busy Lamp Field Configuration Yealink W90B IP DECT PHONE does not support Busy Lamp Field.
4.4.3
Feature Key Synchronization Configuration
Feature Key Synchronization provides synchronization of phone services such as Call Forwarding and Do Not Disturb with the settings on Cisco BroadWorks for the analogous services. Configure the phone to enable Feature Key Synchronization as follows:
Ste p
Com mand
Pur pos e
Step 1
Enable Feature Key Synchronization. Example: features.feature_key_sync.enable = 1
Enable Feature Key Synchronization feature.
0 for Disabled
1 for Enable
4.4.4 Call Center Feature Configuration Yealink W90B IP DECT PHONE does not support Call Center feature.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 25 OF 1142
4.4.5 Call Recording Feature Configuration Yealink W90B IP DECT PHONE does not support Call recording feature.
4.4.6 Security Classification Feature Configuration Yealink W90B IP DECT PHONE does not support Security Classification feature.
4.4.7 Emergency Call Configuration Yealink W90B IP DECT PHONE does not support Emergency Call.
4.4.8 Advice of Charge Configuration Yealink W90B IP DECT PHONE does not support Advice of Charge feature.
4.4.9
PANI header support Configuration
This section provides configuration instructions to configure the device to enable P Access-Network-Info header. Configure the emergency for phone as follows:
Ste p
Com mand
Pur pos e
Step 1 Step 1
Configure the PANI header support for Invite message. Example:
account.1.invite_with_pani_header.en able=1
Configure the PANI header support for register message Example:
account.1.reg_with_pani_header.enabl e=1
Configure the PANI header support for Invite message. 0 for Disabled 1 for Enable
Configure the PANI header support for register message. 0 for Disabled 1 for Enable
4.5 Xtended Services Interface Feature Configuration
This section applies to SIP phones, soft clients, and other devices that provide a user interface.
This section provides configuration instructions for configuration of Xtended Services Interface features supported by the phone, including but not limited to, Cisco BroadWorks Directory and Cisco BroadWorks Call Logs.
For a phone to access Xtended Services Interface features including services, directories, call logs and so on. The SIP phone must first authenticate the user. At present, Yealink SIP phone supports two methods for authenticating the user: Cisco BroadWorks User Login Credentials and SIP Authentication Credentials.
Cisco BroadWorks User Login Credentials
1) Browse to the Applications Broadsoft XSI XSI Account.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 26 OF 1142
Figure 3 Xtended Services Interface Configuration
2) Type in the related parameters and then click Confirm. SIP Authentication Credentials 3) Browse to the Account Register, type in the correct account parameters, then click
the Confirm button.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 27 OF 1142
Figure 4 Xtended Services Platform Account Configuration
4) Browse to Applications Broadsoft XSItype in the correct parameters, then save the configuration.
Figure 5 Xtended Services Platform Configuration
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 28 OF 1142
4.5.1
Cisco BroadWorks User Service Configuration
Integration with the Cisco BroadWorks Xtended Services Interface for User Service Configuration enables the phone to display and configure Cisco BroadWorks user services such as Remote Office, Cisco BroadWorks Anywhere, Call Forwarding, and Simultaneous Ring. To enable User Service Configuration, perform the following steps.
Ste p
Com mand
Pur pos e
Step 1
bw .xsi.enable = Example: bw .xsi.enable = 1
Enable XSI feature. 0 for Disabled 1 for Enable
Step 2
sip.authentication_for_xsi = Example: sip.authentication_for_xsi = 1
Enable the XSP authentication mode.
0= Cisco BroadWorks User Login credentials
1= SIP Authentication credentials
Step 3
account.1.xsi.user= account.1.xsi.password = Example: account.1.xsi.user= 2405551111 account.1.xsi.password = 123456
Set the Xsi login user name and passwordfor line 1.
Step 4
account.1.xsi.host = Example:
account.1.xsi.host =xsp1.iop1.Cisco BroadWorks.net
Set the IP address or domain name of the Xsp server.
Step 5
account.1.xsi.server_type = Example: xsi.server_type =http
Set the transport type for Xsi.
Step6
account.1.xsi.port = Example: account.1.xsi.port =80
Set the transport port for Xsi.
4.5.2
Cisco BroadWorks Directory Configuration
Integration with the Cisco BroadWorks Xtended Services Interface for directories enables the phone to download personal, group, and enterprise directories from Cisco BroadWorks and makes them available to a user via the phone menus. To enable this feature, perform the following steps.
Ste p Step 1
Step 2
Com mand
Enable the Netw ork directory to be displayed on the IP phone. Example: bw.xsi.directory.enable =1
Enable the group directory to be displayed on the IP phone. Example: bw_phonebook.group_enable = 1
Pur pos e
Enable the Netw ork directory to be displayed on the IP phone. 0 = Disabled 1 = Enabled
Enable the group directory to be displayed on the IP phone. 0 = Disabled 1 = Enabled
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 29 OF 1142
Ste p Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 Step 11 Step 12
Com mand
Configure the group directory name displayed on the IP phone. Example: bw_phonebook.group_displayname = Group
Configure the group common directory to be displayed on the IP phone. Example: bw_phonebook.group_common_enable = 1
Configure the group common directory name displayed on the IP phone. Example: bw_phonebook.group_common_displayname = GroupCommon
Configure the enterprise directory to be displayed on the IP phone. Example: bw_phonebook.enterprise_enable = 1
Configure the enterprise directory name displayed on the IP phone. Example: bw_phonebook.enterprise_displayname = Enterprise
Enable the enterprise common directory to be displayed on the IP phone. Example: bw_phonebook.enterprise_common_enable = 1
Configure the enterprise common directory name displayed on the IP phone. Example: bw_phonebook.enterprise_common_display name = EnterpriseCommon
Enable the personal directory to be displayed on the IP phone. Example: bw_phonebook.personal_enable = 1
Configure the personal directory name displayed on the IP phone. bw_phonebook.personal_displayname = Personal
Enable the customdirectory feature. Example: bw_phonebook.custom = 1
Pur pos e
Configure "Group" as the group directory name displayed on the IP phone. The default value is "Group".
Enable the group common directory to be displayed on the IP phone. 0 = Disabled 1 = Enabled
Configure "GroupCommon" as the group common directory name displayed on the IP phone.
The default value is "GroupCommon".
Enable the enterprise directory to be displayed on the IP phone. 0 = Disabled 1 = Enabled
Configure "Enterprise" as the enterprise directory name displayed on the IP phone. The default value is "Enterprise".
Enable the enterprise common directory to be displayed on the IP phone. 0 = Disabled 1 = Enabled
Configure "EnterpriseCommon" as the enterprise common directory name displayed on the IP phone.
The default value is "EnterpriseCommon".
Enable the personal directory to be displayed on the IP phone. 0 = Disabled 1 = Enabled
Configure "Personal" as the personal directory name displayed on the IP phone. The default value is "Personal".
Enable the customdirectory f eature. 0 = Disabled 1 = Enabled
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 30 OF 1142
Ste p Step 13
Com mand
It enables or disables the phone to automatically dow nload all contacts in the BroadSoft Directory fromthe server. bw .xsi.directory.update.enable
Pur pos e
Enable to automatically dow nload all contacts in the BroadSoft Directory fromthe server.
0-Disabled, the phone dow nloads partial contacts fromthe server (the maximum of contacts available for view ing at one time is determined by the server), and you can manually dow nload the remaining contacts as needed.
1-Enabled
4.5.3
Cisco BroadWorks Call Logs Configuration
Integration with the Cisco BroadWorks Xtended Services Interface for Call Logs enables the phone to get call log history (missed, placed, and received calls) from Cisco BroadWorks and make them available to a user via the phone menus. To enable this feature, perform the following step.
Ste p
Com mand
Pur pos e
Step 1
Enable the BroadSoft call log feature. Example:
bw.xsi.call_log.enable = 1
Enable Cisco BroadWorks call log feature.
0 for Disabled
1 for Enabled
Configure the phone as shown in the following figure.
Figure 6 Call Logs Configuration
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 31 OF 1142
4.5.4
Cisco BroadWorks Call Park Configuration
Integration with the Cisco BroadWorks Xtended Services Interface for Call Park makes call park available to a user via the phone menus. To enable this feature, perform the following steps.
Ste p
Com mand
Pur pos e
Step 1 Step 2
Enable call park feature for the line. Example: account.1.callpark_enable= 1
Enable the phone to display the Park soft key during a call. Example: features.call_park.enable = 1
Enable call park feature. 0 for Disabled 1 for Enabled
The Park soft key appears on the LCD screen during a call.
0 for Disabled 1 for Enabled
Step 3
Enable the phone to display the GPark soft key during a call. Example: features.call_park.group_enable= 1
The GPark soft key appears on the LCD screen during a call.
0 for Disabled
1 for Enabled
Step 4
Enable the phone to play a warning tone when a call is parked against its line.
Example:
features.call_park.park_ring = 1
Enable the phone to play a w arning tone w hen a call is parked against its line.
0 for Disabled
1 for Enabled
Step 5
Enable the phone to display a parked indicator when a call is parked against its line.
Example:
features.call_park.park_visual_notif y_enable = 1
Enable the phone to display a parked indicator w hen a call is parked against its line.
0 for Disabled
1 for Enabled
Configure the Call Park settings as shown in the following figure.
Figure 7 Call Park Configuration
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 32 OF 1142
4.6 Instant Message and Presence Configuration
Yealink W90B IP DECT PHONE does not support Instant Message and Presence.
4.7 Connected Line Presentation on UPDATE or Re-Invite
Set the phones ability to refresh caller ID:
Ste p
Com mand
Pur pos e
Step 1
Enable refresh caller id feature. Example:
account.1.refresh_remote_id.enable = 1
Enable refresh caller id feature. 0 for Disabled 1 for Enable
Log in to the devices web portal, and enter Account-advance-Caller ID Source. Select the configuration item PAI-FROM, or PAI-RPID-FROM.
Figure 8 Connected Line Presentation on Update or Re-Invite
Or you can use the configuration parameter: account.x.cid_source=. The available values are: 0 FROM 1 PAI 2 PAI-FROM 3 PRID-PAI-FROM 4 PAI-RPID-FROM 5 RPID-FROM You can select 1, 2, or 4 to make it work.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 33 OF 1142
5 Device Management
The Cisco BroadWorks Device Management feature provides the capability to automate generation of device configuration files to support mass deployment of devices. This section identifies the device management capabilities supported by the Yealink W90B IP DECT PHONE and the configuration steps required. For Device Management configuration details not covered here, see the Cisco BroadWorks Device Management Configuration Guide [2] and the Cisco BroadWorks CPE Kit Usage Guide [8].
5.1 Device Management Capabilities Supported
The Yealink W90B IP DECT PHONE has completed Device Management interoperability testing with Cisco BroadWorks using the Cisco BroadWorks Device Management Interoperability Test Plan [7]. The results are summarized in the following table.
The Cisco BroadWorks test plan is composed of packages, each covering distinct interoperability areas. Each package is composed of one or more test items, which in
turn, are composed of one or more test cases. The test plan exercises the Device Management interface between the device and Cisco BroadWorks with the intent to ensure interoperability.
The Supported column in the following table identifies the Yealink W90B IP DECT
PHONE's support for each of the items covered in the test plan packages, with the following designations:
Yes Test item is supported
No NA
Test item is not supported Test item is not applicable
NT Test item was not tested
Caveats and clarifications are identified in the Comments column.
NOTE: DUT in the following table refers to the Device Under Test, which in this case is the Yealink W90B IP DECT PHONE.
Cisco BroadWorks Device Management Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items
Supported Com ments
HTTP File Dow nload HTTP Dow nload Using XSP IP Address
Yes
HTTP Dow nload Using XSP FQDN
Yes
HTTP Dow nload Using XSP Cluster FQDN
No
Not Tested
HTTP Dow nload With Double Slash
Yes
HTTPS File
HTTPS Dow nload Using XSP IP
Yes
Dow nload
Address
HTTPS Dow nload Using XSP FQDN
Yes
HTTPS Dow nload Using XSP Cluster FQDN
No
Not Tested
HTTPS File
HTTPS Dow nload w ith Client
Yes
Dow nload with
Authentication Using XSP FQDN
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 34 OF 1142
Cisco BroadWorks Device Management Interoperability Test Plan Support Table
Test Plan Package
Clie nt Authe ntication
Test Plan Package Items
HTTPS Dow nload w ith Client Authentication Using XSP Cluster FQDN
Supported No
Com ments Not Tested
Tim e Zone Mapping Inspect Time Zone Setting
Yes
Language Mapping Inspect Language Setting
No
File Inspection
Inspect System Conf ig File
Yes
Inspect Device-Specific Config File
Yes
Inspect Other Config Files
Yes
Inspect Static Files
Yes
Device Inspection
Inspect SIP Settings
Yes
Inspect Line Settings
Yes
Inspect Service Settings
Yes
HTTP File Upload
HTTP Upload Using XSP IP Address
Yes
HTTP Upload Using XSP FQDN
Yes
HTTP Upload Using XSP Cluster FQDN
No
Not Tested
Call Processing
Register w ith Authentication
Yes
Sanity Tests
Call Origination
Yes
Call Termination
Yes
Remote Restart
Yes
Shared Line Origination
Yes
Shared Line Termination
Yes
Shared Line Status
Yes
Busy Lamp Field
No
Netw ork-Based Conference
Yes
Flexible Seating
Association via Voice Portal
No
Association via Phone
No
No Touch
Provision via DHCP Options Field
Yes
Pr ovis ioning
No Touch Provision via DM redirect
Yes
No Touch Provision via Vendor redirect
Yes
No Touch Provisioning via
Vendor-Hosted Redirect
Service using HTTP is not
supporting.
5.2 Device Management Configuration
This section identifies the steps required to enable the Yealink W90B IP DECT PHONE for device management. For Device Management configuration details not covered here, see the Cisco BroadWork s Device Management Configuration Guide [2] and the Cisco BroadWork s CPE Kit Usage Guide [8].
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 35 OF 1142
5.2.1
Configure Cisco BroadWorks Tags
The template files in Device Management use tags to represent the data stored on Cisco BroadWorks. When a configuration changes for a user, Device Management parses the template files and replaces the Device Management tags with the associated data stored on Cisco BroadWorks. There are default tags defined in the Device Management software and there are custom tags that the service provider can create/define via the web portal for use by Device Management. There are two types of custom tags that can be defined: system-default tags are common to all phones on the system; device-typespecific tags are common to Yealink W90B only.
The Yealink W90B IP DECT PHONE makes use of dynamic tags, which may be configured by a Cisco BroadWorks administrator as either system default or device type specific tags. This section identifies the required tags.
5.2.1.1
Create System Default Tags
Browse to System Resources Device Management Tag Sets and select the System Default tag set. Add the system default tags in the following table if they do not already exist.
Tag Nam e
Valid Settings
De s cr iption
%SNTP_SERVER_1%
IP address/FQDN
NTP server address.
%SNTP_SERVER_2% %DNS_SERVER_1%
IP address/FQDN IP address
NTP server address alternate. DNS server address.
%DNS_SERVER_2% %SBC_ADDRESS%
IP address IP address/FQDN
DNS server address alternate. SBC SIP address.
%SBC_PORT%
Port
SBC SIP port.
%USE_SBC_BOOLEAN%
%XSP_ADDRESS_XSI_A CTIONS%
0/1 IP address/FQDN
Use SBC: 1=yes, 0=no.
Xtended Services Platformserver address.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 36 OF 1142
Example System Default Tag settings
Figure 9 System Default Tag Settings
5.2.1.2
Create Device Type-specific Tags
Browse to System Resources Device Management Tag Sets and select Add to add a new tag set. Configure the tag set name using the device name appended by Tags: Yealink W90B_Tags. Add the device type specific tags in the following table to the device tag set. If the tag set already exists, ensure the tags are defined in the following table.
Tag Nam e
Valid Settings
De s cr iption
%COUNTRY%
United States, Australia, Austria, Brazil, Belgium, China, Czech, Denmark, Finland, France, Germany, Great
Britain, Greece, Hungary, Lithuania, India, Italy, Japan, Mexico, New Zealand, Netherlands, Norw ay, Portugal,
Spain, Sw itzerland, Sweden, Russia, Chile, Czech ETSI
Identifies the country for standard ringtones.
%FEATURE_BW_CALL_PA 0
RK%
1
Enable/Disable the call park feature for the phone.
0 = Disabled 1 = Enable
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 37 OF 1142
Tag Nam e %TRANSPORT_TYPE%
Valid Settings
0 1 2 3
%REJECT_ANONYMOUS_ 0
CALL_BINARY%
1
%CALL_WAITING_BINARY 0
%
1
%FEATURE_SYN%
0
1
%LANGUAGEWEB% %XSIPASSWORD-x%
English Turkish Portuguese Spanish Italian German French Polish Russian
string
%TIMEZONENAME% %W90B_FIRMWARE%
See Appendix B.
130.<x.x.x>.rom Example:130.85.0.10.rom
Example Device Type-specific Tag Settings
De s cr iption Defines the SIP transport.
0 = UDP 1 = TCP 2 = TLS 3 = DNS NAPTR
Enable/Disable the anonymous call rejection feature for each line.
0 = Disabled 1 = Enable
Enable/Disable the call w aiting f eature.
0 = Disabled 1 = Enable
Enable/Disable the feature key synchronization for the phone.
0 = Disabled 1 = Enable Identifies language for w eb management.
Xsi login passw ord for line x. Note: Leave the value as blank, this tag w ill be customized at each device profile level. Defines the time zone name.
Defines the firmw are version for W90B.
Figure 10 Device Type Specific Tag Settings
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 38 OF 1142
5.2.2
Configure Cisco BroadWorks Device Profile Type
The device profile type is a system-level structure that defines how the device interfaces with Cisco BroadWorks. It also identifies the default configuration files and other files, such as firmware, which are required for the device to operate correctly. The device profile type is created by the system administrator. Group administrators use the device profile type to create a device profile. The device profile is an instance of the device profile type that is associated with a physical device.
There are two Cisco BroadWorks device profile configuration methods described: import and manual. The import method takes a DTAF as input and builds the Cisco BroadWorks device profile type(s) automatically. The manual method takes the administrator through the steps to manually add and configure the device profile type(s).
The import method should be used if all of the following prerequisites are met:
The Cisco BroadWorks Release is 17.0 or later.
The device profile type(s) being imported do not already exist on the system. (If either a previous import or manual configuration was done, then the import fails.)
There is a DTAF file available for import with a Cisco BroadWorks release level that is the same as or prior to the release to which it is being imported. If the DTAF file is at a release level later than the release being imported to, then the import can fail.
Otherwise, use the manual method.
For more detailed instructions, see the Cisco BroadWorks CPE Kit Usage Guide [8] and the Cisco BroadWork s Device Management Configuration Guide [2].
5.2.2.1
Configuration Method 1: Import
This section identifies the steps necessary to make use of the Device Management import feature to configure Cisco BroadWorks to add the Yealink W90B IP DECT PHONE as a Device Management-enabled device type. Also, see the Cisco BroadWorks CPE Kit Usage Guide [8].
Download the Yealink W90B CPE kit from BroadSoft Xchange at xchange.broadsoft.com. Extract the DTAF file(s) from the CPE kit. These are the import files. Repeat the following steps for each model you wish to import.
1) Log in to Cisco BroadWorks as an administrator. 2) Browse to System Resources Identity/Device Profile Types and then click
Import.
3) Select Browse to find the extracted DTAF file for the model and then click OK to start the import.
After the import finishes, complete the following post-import configuration steps: 4) Browse to System Resources Identity/Device Profile Types.
5) Perform a search to find the imported Yealink device profile type, Yealink W90B.
6) Browse to the Profile page and change the Device Management Device Access FQDN to your Xtended Services Platform (Xsp) or Xtended Services Platform cluster address.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 39 OF 1142
Figure 11 Device Access FQDN
7) Click the Files and Authentication link and then select the option to rebuild all the system files. Firmware files must be obtained from Yealink. These files are not included in the import. Complete the steps in section 5.2.2.2.2.2 Static Files to define the static firmware files and to upload the firmware.
NOTE: The non-firmware static files in section 5.2.2.2.2.2 Static Files are included in the import.
8) After importing the DTAFs, restart the Application Server to load the TimeZoneAlias files.
5.2.2.2
Configuration Method 2: Manual
This section identifies the manual steps necessary to configure Cisco BroadWorks to add the Yealink W90B IP DECT PHONE as a Device Management-enabled device type. This method should not be used except in special cases as described in the opening to section 5.2.2 Configure Cisco BroadWorks Device Profile Type.
For more detailed instruction on manual configuration, see the Cisco BroadWorks CPE Kit Usage Guide [8] and the Cisco BroadWorks Device Management Configuration Guide [2].
The steps in this section can also be followed to update previously imported or configured device profile type(s) with new configuration files and firmware.
If there are DTAFs for more than one device model, these steps must be completed for each model.
5.2.2.2.1 Create or Modify Device Profile Type
This section identifies the Cisco BroadWorks device profile type settings relevant to Device Management for the Yealink W90B IP DECT PHONE.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 40 OF 1142
Browse to System Resources Identity/Device Profile Types and perform a search to find the Yealink device profile type(s) created in section 3.1 Cisco BroadWorks Device Profile Type Configuration or add the device profile type for each model using the settings from section 3.1 Cisco BroadWorks Device Profile Type Configuration if they do not exist.
Configure the device profile type Signaling Address Type, Standard and Advanced options settings to match the settings in section 3.1 Cisco BroadWorks Device Profile Type Configuration.
Configure the device profile type Device Management options as shown in section 5.2.2.1 Configuration Method 1: Import.
The following subsections identify the required settings specific to Device Management.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 41 OF 1142
5.2.2.2.2 Define Device Profile Type Files
This section describes the Cisco BroadWorks Device Management configuration necessary to identify the configuration files and other files that the Yealink W90B IP DECT PHONE downloads.
To define the files, configuration templates, firmware and other files the W90B IP DECT PHONE uses, they must be uploaded to Cisco BroadWorks. Download the Yealink W90B CPE kit from BroadSoft Xchange at xchange.broadsoft.com. Extract the configuration files from the Configuration Files folder of CPE kit. Obtain the firmware files directly from Yealink.
The following table identifies the Yealink configuration files distributed with the version 80 CPE kit.
File Nam e
CPE Kit Tem plate File Nam e
File Type
De s cr iption
Exam ples:
BWMACADDRESS .cfg
%BWMACADDRESS%. cfg
System-level, Dev ic e-s pec if ic, Static, Time Zone Alias
Dev ic e-s pec if ic
This file contains device specific parameters that the phone needs to load.
contactData.xml
contactData1.xml
Static
This file contains the contact information in XML format.
b l ac k li st.xml
b l ac k li st.xml
Static
This file contains the blacklist contact information in XML format.
DialPlan.xml
DialPlan.xml
Static
Specifies the dialing rules.
AutoDST.xml
AutoDST.xml
Static
Rules set of the beginning and end of Day Light Savings Time.
TimeZoneAliasLab els_Yealink+<mode l>.properties
TimeZoneAliasLabels_Y ealink<model>.properties
Time Zone Alias
The Time zone Alias file is a Cisco BroadWorks Device Management file used to map time zone identifiers betw een Cisco BroadWorks and
Yealink phones. A Time zone Alias file is required for each model.
WebItemsLevel.cfg WebItemsLevel.cfg
Static
This file defines the access level of configuration items in cfg format.
super_search.xml super_search.xml
Static
This file configures the search source list in dialing.
The following table identifies other files that the Yealink W90B IP DECT PHONE downloads from the server or uploads to the server. These files are not provided in the CPE kit and must be obtained from Yealink.
File Nam e
x.x.x.x.rom
%BWMACADDRESS%loc al.c f g
File Type Static Static
De s cr iption
Device firmw arefile.
Supported upload Define, the configuration used to record the change of the phone.
Browse to System Resources Identity/Device Profile Types Files and Authentication to add the files as described in the following subsections.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 42 OF 1142
5.2.2.2.2.1 Device-specific Files
This section identifies the device-specific files used by Yealink and provides instructions for defining the files and uploading for Device Management.
W90B downloads a phone-specific file based on the phone's MAC address using the following file name format:
<mac-address>.cfg
Add a Cisco BroadWorks device profile type file to Yealink W90B device profile with the settings shown in Figure 32 %BWMACADDRESS%.cfg File.
After creating the device profile type file, upload <mac-address>.cfg extracted from the CPE kit. Use the Browse button on the file definition screen. Be sure to click Apply after uploading the file.
Example Device-specific File Settings
Figure 32 % BWMACADDRESS%.cfg File
5.2.2.2.2.2 Static Files
Static files are files such as firmware and media files that are not configurable and/or do not make use of the dynamic Cisco BroadWorks Device Management tags. The Yealink W90B requires the following static files:
<firmware-version>.rom
contactData.xml
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 43 OF 1142
config.bin AutoDST.xml
DialBlock .xml DialPlan.xml DialNow.xml
super_search.xml WebItemsLevel.cfg Add the static files to the device profile type with the settings shown in Figure 43 Static File Settings. After creating the device profile type file, upload static files extracted from the CPE kit or obtained from Yealink. Use the Browse button on the file definition screen. Be sure to click Apply after uploading the file Example Static File settings
Figure 43 Static File Settings
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 44 OF 1142
5.2.2.2.3 Time Zone Alias File
The CPE kit contains a time zone properties file for each device model. This file maps the Cisco BroadWorks user's time zone settings to the device's time zone settings.
This time zone mapping file must be added to the /usr/local/Cisco BroadWorks/bw_base/ conf/dms directory on the Application Server using the following file name format:
TimeZoneAliasLabels_<Device_Type_Name>.properties
For example, if the device type name is Yealink _W90B, the time zone mapping file name must be TimeZoneAliasLabels_Yealink_W90B.properties. A space in the device name must be converted to a "+" in the file name.
The file must contain the mapping of Cisco BroadWorks time zones values to Yealink time zone values. The following is an example of the file contents:
US_ALASKA=-9 cat US_HAWAII=-10 CANADA_PACIFIC_TIME=-8 MEXICO_PACIFIC_TIME=-8 US_PACIFIC_TIME=-8 US_ARIZONA=-7 CANADA_MOUNTAIN_TIME=-7 MEXICO_MOUNTAIN_TIME=-7 US_MOUNTAIN_TIME=-7 CANADA_CENTRAL_TIME=-6 US_CENTRAL_TIME=-6 CANADA_EASTERN_TIME=-5 US_INDIANA=-5 US_EASTERN_TIME=-5 VENEZUELA_TIME=-4.5 CANADA_ALTANTIC_TIME=-4 CHILE_TIME=-4 CANADA_NEWFOUNDLAND=-3.5 ARGENTINA_TIME=-3 GREENWICH_MEAN_TIME=0 CENTRAL_EUROPEAN_TIME=+1 EASTERN_EUROPEAN_TIME=+2 EAST_AFRICAN_TIME=+3 IRAN_TIME=+3.5 AZERBAIJAN_TIME=+4 AFGHANISTAN_TIME=+4.5 PAKISTAN_TIME=+5 INDIA_TIME=+5.5 EASTERN_KAZAKHSTAN_TIME=+6 MYANMAR_TIME=+6.5 THAILAND_TIME=+7 CHINA_TIME=+8 JAPAN_TIME=+9 AUSTRALIAN_CENTRAL_STANDARD_TIME=+9.5 AUSTRALIAN_EASTERN_STANDARD_TIME=+10 NEWZEALAND_TIME=+12
This file should contain all the time zones supported by the Service Providers Cisco BroadWorks system. The Application server must be restarted to load this file.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 45 OF 1142
The Cisco BroadWorks Application Server must be restarted for the TimeZoneAlias files to be picked up by the system.
5.2.2.2.4 Language Mapping
Language mapping is not provided for Yealink W90B.
5.2.3
Create Device Profile Instance
The previous sections defined the device profile type such that the system is ready to mass deploy device profiles. A device profile is an instance of the device profile type and defines the Cisco BroadWorks interface to an individual Yealink phone deployed at a user's desk. Browse to the Cisco BroadWorks <group> Resources Identity/Device Profiles and select Add to add a new Yealink W90B IP DECT PHONE device profile. Configure the device profile as shown in the Figure 65.
Example Identity/Device Profile Settings
Figure 54 Device Profile Instance
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 46 OF 1142
For the Xtended Services Interface feature to be authenticated, it is necessary to override the Xtended Services Interface password for each of the lines at the device profile instance level. To override custom tags at the device profile instance level, c lick on the Custom Tags tab.
Figure 65 Device Profile Instance Custom Tags Override
Then click Add to add a custom tag with the following parameters:
Param eter
Value
De s cr iption/Notes
Tag Name Tag Value
XSIPASSWORD-<line number> Example: XSIPASSWORD-1
The user's Xsi password. Example: 123456
This tag provides the Xsi password of the user for the line w hich is assigned to the phone. Line number is an integer
corresponding to the phone line in assignment.
Example device profile custom tag setting
Figure 76 Device Profile Instance Custom Tags Add Repeat the tag adding process for each of the lines provisioned on the device.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 47 OF 1142
5.2.4
Configure Cisco BroadWorks User
Configure the user with the desired Cisco BroadWorks configuration and services. Any services that require a specific configuration on the device are managed via Device Management and are defined in the device configuration files, if the template files are created with the correct Device Management tags.
The device profile created in the previous section must be assigned to the Cisco BroadWorks user. Assigning the device profile to the user automatically causes the Device Management feature to generate the device configuration files for this user's device.
To assign the device profile to the user, browse to the Cisco BroadWorks <user> Addresses.
5.2.5
Configure Edge Device
In many deployments, an edge device is deployed on the enterprise edge. Configure the edge device SIP server setting with the service provider's Session Border Controller IP address or FQDN. If there is no edge device and the phones communicate directly with the service provider's SBC, skip this section.
To integrate the edge device with Device Management, the SBC address tag (%SBC_ADDRESS%) defined in section 5.2.1.1 Create System Default Tags must be overridden at the group level with the LAN address of the edge device. At the Group Utilities Device Configuration page, select the Yealink device profile (example: YealinkW90B). Perform the following steps.
1) Click on the Custom Tags tab.
2) Click the Add button.
3) Add the SBC tag.
4) Enter "SBC_ADDRESS" as the tag.
5) Enter the IP address as the value (edge device LAN IP address).
6) Click OK to save the tag data.
This Tag/Value will be applied to all Yealink W90B phones in the group using the modified Device Profile Type.
5.2.6
Configure Yealink W90B IP DECT PHONE
This section describes the steps necessary to configure the Yealink W90B to integrate with Cisco BroadWorks Device Management.
The phone must be configured with the Device Management URL and authentication user name and password. This configuration can be accomplished as described in the sections:
5.2.6.1 Manual Provisioning
5.2.6.2 No Touch Provisioning
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 48 OF 1142
5.2.6.1 Manual Provisioning
5.2.6.1.1 Check Enterprise/Business DHCP Server Settings
The Yealink phone uses the file server parameters configured on the phone unless Option 66 has been defined on the DHCP server. If the DHCP server returns data set for the Option 66 parameter, then the Yealink phone uses the address defined in this field as the server address to retrieve its configuration data. When using manual provisioning, to make sure that the phone interfaces properly with Device Management, the Option 66 parameter must not be set on the DHCP server. If Option 66 is defined and cannot be cleared, then the Zero Active parameter in the DHCP menu must be set to "Disabled". This parameter is set at boot time by accessing the web user interface. 1) Click the Settings tab. 2) In the Zero Active drop-down box, select Disabled.
3) Confirm the configuration changes and start the phone initialization.
5.2.6.1.2 Provision Manual Device Management Settings
Log in to the web user interface for the W90B IP DECT PHONE (https://<phone-ipaddress>). Go to the Settings Auto Provision web page and set the following: Power On On URL Device Management server (Xtended Services Platform) device address URL
Example: http(s)://xsp1.iop1.Cisco BroadWorks.net:80/dms/Yealink_W90B/ HTTP Authentication:
User Name Cisco BroadWorks Device Access (Example: yealink) Password Cisco BroadWorks Device Access Password (Example: 123456) Restart the phone to force the phone to download the Device Management configuration files and firmware. Example Login (Default User Name/Password is admin/admin)
Figure 87 Login Screen
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 49 OF 1142
Example Auto Provision web page
Figure 18 Auto Provision Screen
The Yealink phone uses the file server parameters configured on the phone unless Option 66 has been defined on the DHCP server. If the DHCP server returns data set for the Option 66 parameter, then the Yealink phone uses the address defined in this field as the server address to retrieve its configuration data. After all parameters are entered, click the Save button. Allow the phone to reboot and retrieve the new configuration parameters from Device Management.
5.2.6.2 No Touch Provisioning
5.2.6.2.1 No Touch Provisioning via Cisco BroadWork s Device Management
The No Touch Provisioning method via Cisco BroadWorks Device Management uses DHCP and Device Management default configuration files. This enables configuration of the phone out-of-the-box without pre-provisioning before sending it to a customer's site. No Touch Provisioning is done using the DHCP options provided by the end customer's DHCP server. The steps are as follows: 1) The phones are shipped to the end customer without pre-provisioning.
2) The end customer's DHCP server is configured with Option 66 with the default Device Management URL.
3) The phone is plugged in and it receives the default Device Management URL from the DHCP server.
4) The phone queries for the default product file from Device Management. 5) The phone receives the default device file from Device Management and provisions
the phone with the physical Device Management URL for the specific device model.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 50 OF 1142
6) The phone resynchronizes with Device Management and prompts Zero Touch Update.
7) The end user or administrator enters the device management credentials into the Auto Provision username and password fields.
8) The phone resynchronizes with Device Management and downloads the files associated with the credentials supplied via the above step.
Device Management must be configured to facilitate the No Touch Provisioning method. Configuration can be performed using the Device Management import function or done manually. Each method is described in the following subsections
5.2.6.2.2 Configuration Method 1: Import
This section identifies the steps necessary to make use of the Device Management import feature to configure Cisco BroadWorks to add the Device Management Defaults device type for No Touch Provisioning.
The import method is available in Cisco BroadWorks Release 17.0 and later. For previous releases, use the manual configuration method described in the next section.
Download the Yealink W90B CPE kit from BroadSoft Xchange at www.broadsoft.com/xchange. Extract the DeviceManagementDefaults.DTAF.zip file from the CPE kit. This is the import file. Log in to Cisco BroadWorks as an administrator. Browse to System Resources Identity/Device Profile Types and select Import. Select Browse to find the extracted DTAF file and click OK to start the import.
After the import finishes, the following post-import configuration steps must be completed. Browse to System Resources Identity/Device Profile Types and perform a search to find the imported DeviceManagementDefaults device profile type. Browse to the Profile page and change the Device Management Device Access FQDN to your Xtended Services Platform or Xtended Services Platform cluster address.
Example:
Figure 19 Dev ice Access FQDN
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 51 OF 1142
Next, using the Files and Authentication link, select the option to rebuild all the system files.
5.2.6.2.3 Configuration Method 2: Manual
This section identifies the manual steps necessary configure Cisco BroadWorks to add the Device Management Defaults device type for No Touch Provisioning
The manual method must be used for Cisco BroadWorks releases prior to Release 17.0. It is an optional method in Release 17.0 and later. The steps in this section can also be followed to update previously imported or configured device profile type(s) with new configuration files and firmware.
5.2.6.2.3.1 Create Default Device Profile Type
A Device Management default device profile type must be created. This device profile type can be configured to serve default provisioning files to Yealink W90B endpoints, as well as other vendor devices.
Create a default device profile type as shown in the following figure. Only the device management settings are important in this context since the profile type is used only to serve default provisioning files. The standard and advanced settings do not matter.
5.2.6.2.3.1.1 Configure Standard Options
The device profile type name and standard options do not matter, but an example is provided for reference. All settings can be left with their default values.
Figure 20 Default Device Profile Type
5.2.6.2.3.1.2 Configure Advanced Options The advanced options do not matter, but an example is provided for reference. All settings can be left with their default values.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 52 OF 1142
Figure 21 Configure Advanced Options
5.2.6.2.3.1.3 Configure Device Management Options
Configure the device profile type Device Management Options as directed in the following table. These are common settings, which apply to all devices enabled for Device Management.
Parameters not identified in the following table can usually be left with their default values.
Param eter
Value
De s cr iption
Device Configuration Tags
Use Default SystemTag Set Only
Allow Identity/Device Profiles to Configure
Custom Tags
Checked
Optional
Allow Groups to Configure Custom Tags
Checked
Optional
Device Access
http
Protocol
Device Access FQDN
<Cisco BroadWorks-XSP-ClusterAddress>
Example: xsp.iop1.Cisco BroadWorks.net
If using an Xtended Services Platform farm, set this to the
Xtended Services Platformcluster FQDN. Otherw ise, set it to the individual Xtended Services Platform FQDN or IP address.
Device Access Port
<Cisco BroadWorks-XSP-Port> Example: 80
This should be set to "80".
Device Access
dms
Context Name
This does not need to be defined.
Cisco BroadWorks defaults to the system-defined value.
Device Access URI
def
This defines the directory the Xtended Services Platformuses to
access the default configuration f iles .
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 53 OF 1142
Example Device Management Options settings:
Figure 22 Device Management Options Settings
5.2.6.2.3.2 Define Device Profile Type Files This section describes the Cisco BroadWorks Device Management configuration necessary to identify the configuration files used to enable the DeviceManagementDefaults device type for Yealink W90B. The files must be defined as described in the following sections:
y000000000130.cfg Add the static files to the device profile type with the settings shown in the following figure.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 54 OF 1142
Figure 23 Default y000000000130.cfg 5.2.6.2.4 DHCP Server Configuration (Cisco BroadWork s Default) and Redirect Events
Configure the end customer's DHCP server with Option 66/43 containing the default Cisco BroadWorks Device Management URL as http://<Device Access FQDN>:<Device Access Port>/ <Device Access Context Name>/def.
Example:
option BWRedir code 43 = string;
subnet 10.2.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option domain-name-servers 10.2.0.29; option routers 10.2.0.1; option BWRedir "http://ylxsp.yealink.com:80/dms/" }
Yealink W90B starts the provisioning process by following this default Cisco BroadWorks Device Management URL to obtain an initial configuration redirect. The following steps detail the phone's sequence to become fully provisioned on Cisco BroadWorks after receiving the redirect from Cisco BroadWorks.
1) The phone does initial resynchronization with Device Management and downloads the default file from location specified in DHCP offer.
2) The phone displays configuration wizard on the phone screen.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 55 OF 1142
3) The end user or administrator follows the wizard and enters the device username and password using the user interface on the phone.
4) The phone resynchronizes with Device Management and downloads the file(s) associated with the credentials supplied via the previous step.
5.2.6.2.5 DHCP Server Configuration (Direct DM Location) and Redirect Events
Configure the end customer's DHCP server with Option 66/43 containing the direct Yealink Device Management URL as http://<Device Access FQDN>:<Device Access Port>/ <Device Access Context Name>/Yealink-W90B.
Example:
option BWRedir code 43 = string;
subnet 10.2.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option domain-name-servers 10.2.0.29; option routers 10.2.0.1; option BWRedir "http://ylxsp.yealink.com:80/dms/Yealink-W90B/" }
Yealink W90B starts the provisioning process by following Yealink Device Management URL to obtain the device configuration files. The following steps detail the phone's sequence to become fully provisioned on Cisco BroadWorks after receiving the direct URL from Cisco BroadWorks.
1) The phone does initial resynchronization with Device Management and downloads the configuration file from location specified in DHCP offer.
2) The end user or administrator enters the device username and password using the user interface on the phone.
3) The phone resynchronizes with Device Management and downloads the file(s) associated with the credentials supplied via the previous step.
5.2.6.2.6 No Touch Provisioning via Yealink Redirect Service
Yealink Device Management Redirect is a web redirect service hosted by Yealink. It works in conjunction with the Cisco BroadWorks Device Management Redirect. Hence, prior to device deployment, the administrator is required to login to Yealink's web portal to associate each device based on the MAC address to the default Cisco BroadWorks Device Management URL. At boot time, the Yealink W90B IP DECT phones automatically queries the Yealink Device Management Redirect service for the associated Cisco BroadWorks URL. The Yealink W90B IP DECT Phone finally completes the provisioning process as detailed in the previous section. For more information about the Yealink Device Management Redirect service, go to https://rps.yealink.com/.
NOTE: If a secured (HTTPS) connection is required, then install the CA certificates or set the security trusted_certificates to "disable" and restart the phone.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 56 OF 1142
5.3 Upgrade from Previous CPE Kits
The previous configuration sections are primarily structured around importing or manually configuring the Yealink W90B device profile types for the first time. Many of the steps are unnecessary when upgrading to a new firmware release or CPE kit version. For general instructions on upgrading, see Cisco BroadWorks CPE Kit Usage Guide [8].
Appendix A: Reference W90B Configuration Files
NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the configuration files obtained from Yealink with the specific release to generate your configuration files.
Device-specific File: %BWMACADDRESS%.cfg
NOTE: This is an example file and it should be used for reference only.
#!version:1.0.0.1
##File header "#!version:1.0.0.1" can not be edited or deleted.##
##########################################################################
#############
##
Network
##
##########################################################################
#############
static.network.internet_port.type =
static.network.internet_port.ip =
static.network.internet_port.mask =
static.network.internet_port.gateway =
static.network.static_dns_enable =
static.network.primary_dns=
static.network.secondary_dns =
static.network.static_nat.enable = static.network.static_nat.addr = static.ice.enable = static.sip.nat_stun.enable = static.sip.nat_stun.port = static.sip.nat_stun.server = static.sip.nat_turn.enable = static.sip.nat_turn.server = static.sip.nat_turn.port = static.sip.nat_turn.username = static.sip.nat_turn.password =
static.network.lldp.enable = static.network.lldp.packet_interval =
static.network.cdp.enable = static.network.cdp.packet_interval =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 57 OF 1142
static.network.vlan.internet_port_enable = static.network.vlan.internet_port_vid = static.network.vlan.internet_port_priority = static.network.vlan.dhcp_enable = static.network.vlan.dhcp_option = static.network.vlan.vlan_change.enable =
static.network.qos.audiotos = static.network.qos.signaltos =
static.network.port.max_rtpport = static.network.port.min_rtpport =
static.wui.http_enable = static.wui.https_enable = static.network.port.http = static.network.port.https =
static.network.802_1x.mode = static.network.802_1x.eap_fast_provision_mode = static.network.802_1x.anonymous_identity = static.network.802_1x.identity = static.network.802_1x.md5_password = static.network.802_1x.root_cert_url = static.network.802_1x.client_cert_url =
sip.reg_surge_prevention =
##########################################################################
#############
##
OpenVPN
##
##########################################################################
#############
static.network.vpn_enable =
static.openvpn.url =
##########################################################################
#############
##
Network Other
##
##########################################################################
#############
static.network.dhcp_host_name =
static.network.dhcp.option60type =
static.network.attempt_expired_time =
static.network.mtu_value =
##########################################################################
#############
##
Features
##
##########################################################################
#############
call_waiting.enable =
call_waiting.tone =
call_waiting.off_code =
call_waiting.on_code =
call_waiting.mode =
features.key_as_send = sip.use_23_as_pound =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 58 OF 1142
features.busy_tone_delay =
features.normal_refuse_code = features.dnd_refuse_code =
sip.rfc2543_hold =
sip.use_out_bound_in_dialog =
phone_setting.is_deal180 =
features.save_call_history =
##########################################################################
#############
##
Account
##
##########################################################################
#############
ipui_account.data.url=
##########################################################################
#############
##
DTMF
##
##########################################################################
#############
features.dtmf.hide =
features.dtmf.hide_delay =
features.dtmf.duration =
features.dtmf.volume =
features.dtmf.repetition =
forward.international.enable =
features.fwd_diversion_enable =
features.relog_offtime = features.call_num_filter = sip.trust_ctrl = features.voice_mail_tone_enable = features.voice_mail_alert.enable = features.reboot_in_talk_enable = features.caller_name_type_on_dialing = phone_setting.end_call_on_hook.enable = base.active_handset.number =
features.call.dialtone_time_out = ##v81 Add features.ringer_device.is_use_headset= features.rtp_symmetric.enable =
##########################################################################
#############
##
Transfer
##
##########################################################################
#############
transfer.semi_attend_tran_enable = transfer.blind_tran_on_hook_enable = transfer.on_hook_trans_enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 59 OF 1142
##########################################################################
#############
##
Phone Lock
##
##########################################################################
#############
phone_setting.emergency.number =
##########################################################################
#############
##
Power Led Settings
##
##########################################################################
#############
phone_setting.common_power_led_enable =
phone_setting.ring_power_led_flash_enable =
phone_setting.mail_power_led_flash_enable =
phone_setting.missed_call_power_led_flash.enable =
##########################################################################
#############
##
Watch Dog
##
##########################################################################
#############
static.watch_dog.enable =
##########################################################################
#############
##
Time&Date
##
##########################################################################
#############
local_time.dhcp_time =
local_time.manual_time_enable =
local_time.summer_time =
local_time.dst_time_type =
local_time.start_time =
local_time.end_time =
local_time.offset_time =
local_time.manual_ntp_srv_prior =
local_time.interval = local_time.time_format = local_time.date_format = lcl.datetime.date.format =
auto_dst.url = http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA CCESSURI%Autodst.xml local_time.ntp_server1 = %SNTP_SERVER_1% local_time.ntp_server2 = %SNTP_SERVER_2% local_time.time_zone =%BWTIMEZONE-1% local_time.time_zone_name = %TIMEZONENAME%
##########################################################################
#############
##
Call Display
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 60 OF 1142
########################################################################## ############# phone_setting.called_party_info_display.enable = phone_setting.call_info_display_method =
##########################################################################
#############
##
Base_Upgrade
##
##########################################################################
#############
static.firmware.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%%W90B_FIRMWARE%
##########################################################################
#############
##
Handset_upgrade
##
##########################################################################
#############
over_the_air.url =
over_the_air.url.w53h =
over_the_air.url.w56h =
over_the_air.url.cp930w =
over_the_air.url.t41s_dd10k =
over_the_air.url.w59r =
over_the_air.base_trigger =
over_the_air.handset_trigger =
over_the_air.handset_tip =
#W80B ADD over_the_air.mode =
##########################################################################
#############
##
Autop PNP
##
##########################################################################
#############
static.auto_provision.pnp_enable =
##########################################################################
#############
##
Autop URL
##
##########################################################################
#############
static.auto_provision.server.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%
static.auto_provision.server.username =%BWDEVICEUSERNAME%
static.auto_provision.server.password =%DEVICE_ACCESS_PWD%
##########################################################################
#############
##
Autop Weekly
##
##########################################################################
#############
static.auto_provision.weekly.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 61 OF 1142
static.auto_provision.weekly_upgrade_interval = static.auto_provision.weekly.begin_time = static.auto_provision.weekly.end_time = static.auto_provision.weekly.dayofweek =
##########################################################################
#############
##
Autop Repeat
##
##########################################################################
#############
static.auto_provision.repeat.enable =
static.auto_provision.repeat.minutes =
##########################################################################
#############
##
Autop DHCP
##
##########################################################################
#############
static.auto_provision.dhcp_option.enable =
static.auto_provision.dhcp_option.list_user_options =
static.auto_provision.dhcp_option.option60_value =
##########################################################################
#############
##
Autop Mode
##
##########################################################################
#############
static.auto_provision.power_on =
##########################################################################
#############
##
Flexible Autop
##
##########################################################################
#############
static.auto_provision.flexible.enable =
static.auto_provision.flexible.interval=
static.auto_provision.flexible.begin_time =
static.auto_provision.flexible.end_time =
##########################################################################
#############
##
Autoprovision Other
##
##########################################################################
#############
static.auto_provision.attempt_expired_time =
static.auto_provision.aes_key.com = static.auto_provision.aes_key.mac =
static.auto_provision.inactivity_time_expire =
static.auto_provision.aes_key_in_file = static.auto_provision.encryption.config =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 62 OF 1142
static.auto_provision.url_wildcard.pn = static.auto_provision.reboot_force.enable =
static.auto_provision.custom.protect = static.auto_provision.local_log.backup.enable = static.auto_provision.local_log.backup.path = static.auto_provision.local_log.backup.upload_period = static.auto_provision.local_log.backup.append = static.auto_provision.local_log.backup.append.limit_mode = static.auto_provision.local_log.backup.append.max_file_size = static.auto_provision.local_log.backup.bootlog.upload_wait_time = static.auto_provision.attempt_before_failed = static.auto_provision.retry_delay_after_file_transfer_failed = static.auto_provision.custom.sync = static.auto_provision.custom.sync.path = static.auto_provision.custom.upload_method = static.auto_provision.server.type = static.auto_provision.user_agent_mac.enable = static.auto_provision.update_file_mode = static.auto_provision.dns_resolv_nosys = static.auto_provision.dns_resolv_nretry = static.auto_provision.dns_resolv_timeout =
##########################################################################
#############
##
Alarm
##
##########################################################################
#############
#* range from 1 to 10
alarm.*.handset_stop.enable=1
alarm.*.name=
alarm.*.pre_alarm.delay=0
alarm.*.pre_alarm.handset_stop.enable=1
alarm.*.ring.enable=1
alarm.*.trigger_delay=3
alarm.*.type=0
alarm.*.weekly.begin_time=00:00
alarm.*.weekly.dayofweek=0123456
alarm.*.weekly.end_time=00:00
##########################################################################
#############
##
All Base Diagnostics
##
##########################################################################
#############
static.diagnose.server.port =
static.diagnose.server.username =
static.diagnose.server.url =
static.diagnose.server.password =
static.diagnose.type =
static.diagnose.pcap.max_size =
static.diagnose.log.max_size =
##########################################################################
#############
##
log Setting
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 63 OF 1142
########################################################################## ############# static.local_log.enable = static.local_log.level = static.local_log.max_file_size =
static.syslog.enable = static.syslog.server = static.syslog.server_port = static.syslog.transport_type = static.syslog.level = static.syslog.facility = static.syslog.prepend_mac_address.enable =
##########################################################################
#############
##
Dial Plan
##
##########################################################################
#############
dialplan.replace.prefix.1 = dialplan.replace.replace.1 = dialplan.replace.line_id.1 = #dialplan_replace_rule.url = http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA CCESSURI%dialplan.xml
dialplan.dialnow.rule.1 = dialplan.dialnow.line_id.1 = phone_setting.dialnow_delay = #dialplan_dialnow.url = http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA CCESSURI%dialnow.xml
dialplan.area_code.code = dialplan.area_code.min_len = dialplan.area_code.max_len = dialplan.area_code.line_id =
dialplan.block_out.number.1 = dialplan.block_out.line_id.1 =
dialplan.emergency.enable = dialplan.emergency.asserted_id_source = dialplan.emergency.custom_asserted_id = dialplan.emergency.server.1.address = dialplan.emergency.server.1.port = dialplan.emergency.server.1.transport_type = dialplan.emergency.1.value = dialplan.emergency.1.server_priority =
##########################################################################
#############
##
Echo Cancellation
##
##########################################################################
#############
voice.vad =
voice.cng =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 64 OF 1142
##########################################################################
#############
##
Jitter Buffer
##
##########################################################################
#############
voice.jib.adaptive =
voice.jib.min =
voice.jib.max =
voice.jib.normal =
##########################################################################
#############
##
Tone
##
##########################################################################
#############
voice.tone.country =
voice.tone.dial =
voice.tone.ring =
voice.tone.busy =
voice.tone.callwaiting =
##########################################################################
#############
##
TR069
##
##########################################################################
#############
static.managementserver.enable =
static.managementserver.username =
static.managementserver.password =
static.managementserver.url =
static.managementserver.periodic_inform_enable =
static.managementserver.periodic_inform_interval =
static.managementserver.connection_request_username =
static.managementserver.connection_request_password =
##########################################################################
#############
##
SIP Advanced
##
##########################################################################
#############
sip.timer_t1 =
sip.timer_t2 =
sip.timer_t4 =
sip.listen_port =
sip.tls_listen_port =
sip.disp_incall_to_info =
###DECT V83 Add
sip.request_validation.source.list =
sip.request_validation.digest.list =
sip.request_validation.event =
sip.request_validation.digest.realm =
sip.send_response_by_request =
sip.notify_reboot_enable =
sip.requesturi.e164.addglobalprefix =
sip.cid_source.preference =
sip.mac_in_ua =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 65 OF 1142
##########################################################################
#############
##
Contacts
##
##########################################################################
#############
#handset.1.contact_list.url = http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA CCESSURI%contactData1.xml
static.directory_setting.shared_contact.enable = shared_contact_list.url =
##########################################################################
#############
##
Romote Phonebook
##
##########################################################################
#############
remote_phonebook.data.1.url = remote_phonebook.data.1.name = remote_phonebook.display_name =
features.remote_phonebook.enable = features.remote_phonebook.flash_time =
##########################################################################
#############
##
LDAP
##
##########################################################################
#############
ldap.enable = ldap.customize_label = ldap.name_filter = ldap.number_filter = ldap.tls_mode = ldap.host = ldap.port = ldap.base = ldap.user = ldap.password = ldap.max_hits = ldap.name_attr = ldap.numb_attr = ldap.display_name = ldap.version = ldap.call_in_lookup = ldap.call_out_lookup = ldap.ldap_sort = ldap.incoming_call_special_search.enable =
##########################################################################
#############
##
XML_Phonebook
##
##########################################################################
#############
#X ranges from 1 to 8
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 66 OF 1142
xml_phonebook.data.max_hits = xml_phonebook.data.x.password = xml_phonebook.data.x.username = xml_phonebook.data.x.name = xml_phonebook.data.x.url =
##########################################################################
#############
##
Super Search
##
##########################################################################
#############
super_search.recent_call =
super_search.url =
search_in_dialing.local_directory.priority =
search_in_dialing.local_directory.enable =
search_in_dialing.history.priority =
search_in_dialing.history.enable =
search_in_dialing.remote_phone_book.priority =
search_in_dialing.remote_phone_book.enable =
search_in_dialing.ldap.priority =
search_in_dialing.ldap.enable =
search_in_dialing.bw_directory.priority =
search_in_dialing.bw_directory.enable =
directory.search_default_input_method = directory.search_type =
phone_setting.ringing_timeout = phone_setting.ringback_timeout =
##########################################################################
#############
##
Security Settings
##
##########################################################################
#############
static.security.user_password =
static.security.user_name.user = static.security.user_name.admin =
base.pin_code = base.double_pin_code.enable = base.pin_code_for_register = wui.quick_login = wui.secure_domain_list = static.features.custom_factory_config.enable = static.security.default_ssl_method = static.security.server_ssl_method =
static.security.var_enable = #static.web_item_level.url =http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICE ACCESSURI%WebItemsLevel.cfg static.security.default_access_level = static.security.user_name.var =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 67 OF 1142
##########################################################################
#############
##
Security
##
##########################################################################
#############
static.security.trust_certificates =
static.security.cn_validation =
static.security.ca_cert = static.security.dev_cert = static.phone_setting.reserve_certs_enable =
##########################################################################
#############
##
Trusted Certificates
##
##########################################################################
#############
#static.trusted_certificates.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%ca.crt
#trusted_certificates.delete = http://localhost/all,delete all the trusted
certificates;
static.trusted_certificates.delete =
##########################################################################
#############
##
Server Certificates
##
##########################################################################
#############
#static.server_certificates.url =
http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA
CCESSURI%server.pem
#server_certificates.delete = http://localhost/all, delete the server
certificate;
static.server_certificates.delete =
##########################################################################
#############
##
Language Settings
##
##########################################################################
#############
lang.wui =
wui_lang.delete = wui_lang.url =
##########################################################################
#############
##
Customized Factory Configurations
##
##########################################################################
#############
#static.custom_factory_configuration.url
=http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICE
ACCESSURI%factory.cfg
static.configuration.url =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 68 OF 1142
static.custom_mac_cfg.url =
all_configuration_export.enable=
##########################################################################
#############
##
Handset
##
##########################################################################
#############
static.auto_provision.handset_configured.enable = static.auto_provision.custom.handset.protect = custom.handset.language= custom.handset.time_format = custom.handset.date_format = custom.handset.screen_saver.enable = custom.handset.backlight_in_charger.enable = custom.handset.backlight_out_of_charger.enable = custom.handset.keypad_light.enable = custom.handset.keypad_tone.enable = custom.handset.confirmation_tone.enable = custom.handset.low_battery_tone.enable = custom.handset.auto_answer.enable =
custom.handset.defined_left_key.type = custom.handset.defined_right_key.type = custom.handset.defined_direction_left_key.type = custom.handset.defined_direction_right_key.type = custom.handset.defined_direction_up_key.type = custom.handset.defined_direction_down_key.type = custom.handset.defined_left_key.xml_url = custom.handset.defined_right_key.xml_url custom.handset.defined_direction_left_key.xml_url custom.handset.defined_direction_right_key.xml_url custom.handset.defined_direction_up_key.xml_url custom.handset.defined_direction_down_key.xml_url
#It is only for W56H custom.handset.wallpaper =
##########################################################################
#############
##
DNS
##
##########################################################################
#############
dns_cache_a.1.name =
dns_cache_a.1.ip =
dns_cache_a.1.ttl =
dns_cache_srv.1.name =
dns_cache_srv.1.port =
dns_cache_srv.1.priority =
dns_cache_srv.1.target =
dns_cache_srv.1.weight =
dns_cache_srv.1.ttl =
dns_cache_naptr.1.name =
dns_cache_naptr.1.order =
dns_cache_naptr.1.preference =
dns_cache_naptr.1.replace =
dns_cache_naptr.1.service =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 69 OF 1142
dns_cache_naptr.1.ttl =
################################################################
#
SIP Backup Server
##
################################################################
static.network.dns.ttl_enable =
static.network.dns.last_cache_expired.enable=
static.network.dns.last_cache_expired =
static.network.dns.query_timeout =
static.network.dns.retry_times =
sip.dns_transport_type =
sip.skip_redundant_failover_addr =
#V80 Add features.barge_in_via_username.enable =
##########################################################################
#############
##
Other
##
##########################################################################
#############
features.dnd.allow =
features.fwd.allow =
phone_setting.disable_account_without_username.enable =
phone_setting.end_call_net_disconnect.enable =
push_xml.sip_notify =
phone_setting.warnings_display.mode =
##########################################################################
#############
##
Broadsoft Setting
##
##########################################################################
#############
bw.enable =
features.feature_key_sync.enable =
bw.xsi.enable =
sip.authentication_for_xsi =
bw.xsi.call_log.enable = bw.xsi.call_log.multiple_accounts.enable =
bw.xsi.directory.enable = bw_phonebook.group_enable = bw_phonebook.personal_enable = bw_phonebook.group_common_enable = bw_phonebook.enterprise_enable = bw_phonebook.enterprise_common_enable = bw_phonebook.group_displayname =%BWGROUPID-1% bw_phonebook.personal_displayname = bw_phonebook.group_common_displayname = bw_phonebook.enterprise_displayname =%BWENTERPRISEID1%%BWSERVICEPROVIDERID-1% bw_phonebook.enterprise_common_displayname = bw_phonebook.custom = directory.update_time_interval =
##########################################################################
#############
##
Call Park
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 70 OF 1142
########################################################################## #############
features.call_park.enable = %FEATURE_BW_CALL_PARK% features.call_park.group_enable = %FEATURE_BW_CALL_PARK% features.call_park.park_ring =%FEATURE_BW_CALL_PARK% features.call_park.park_visual_notify_enable =%FEATURE_BW_CALL_PARK% features.call_park.group_park_code = features.call_park.park_code = features.call_park.park_mode = features.call_park.park_retrieve_code =
##########################################################################
#############
##
Base Registration
##
##########################################################################
#############
static.station.mode=
features.dect_management.ip_address
#* range from 1 to 30 station.allowed.*.mac= station.allowed.*.name= station.allowed.*.sync.cluster= station.allowed.*.sync.level= station.*.name= station.*.active= station.*.sync.cluster= station.*.sync.level= station.*.sync.type= static.station.*.network.type= static.station.*.network.ip= static.station.*.network.gateway= static.station.*.network.mask=
#W90B ADD station.*.ext_ptp.enable station.*.lan_master.enable station.*.lan_transport station.allowed.*.ext_ptp.enable station.allowed.*.lan_master.enable station.allowed.*.sync.type
#W80B ADD features.media_transmit.enable=
#W90B ADD phone_setting.auto_sync.action= features.sync.tree.mode=
##########################################################################
#############
##
web
##
##########################################################################
#############
web_setting.dm.title =
web_setting.base.title =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 71 OF 1142
web_setting.dm.model_name = web_setting.base.model_name = phone_setting.dm.login_note_text = phone_setting.base.login_note_text =
##########################################################################
#############
##
DM
##
##########################################################################
#############
static.dm.enable=
static.dm.server.address=
static.dm.server.port=
##########################################################################
#############
##
HAC
##
##########################################################################
#############
voice.handset.tia4965.enable=
voice.headset.tia4965.enable=
##########################################################################
#############
##
Template Settings
##
##########################################################################
#############
#template.X.name=
#template.X.outbound.Y.address=
#template.X.outbound.Y.port=
#template.X.outbound.enable=
#template.X.outbound.fallback_interval=
#template.X.sip_server.Y.address=
#template.X.sip_server.Y.expires=
#template.X.sip_server.Y.port=
#template.X.sip_server.Y.retry_counts=
#template.X.sip_server.Y.transport_type=
####(X ranges from 1 to 10;Y ranges from 1 to 2)
template.1.name = template.1.sip_server.1.address = %BWHOST-1% template.1.sip_server.1.port = 5060 template.1.sip_server.1.transport_type = %TRANSPORT% template.1.sip_server.1.expires = 3600 template.1.sip_server.1.retry_counts = template.1.sip_server.2.address = template.1.sip_server.2.port = template.1.sip_server.2.transport_type = template.1.sip_server.2.expires = template.1.sip_server.2.retry_counts = template.1.outbound.1.address= %SBC_ADDRESS% template.1.outbound.1.port= %SBC_PORT% template.1.outbound.2.address= template.1.outbound.2.port= template.1.outbound.enable= %USE_SBC_BOOLEAN% template.1.outbound.fallback_interval=
template.2.name = template.2.sip_server.1.address = %BWHOST-2%
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 72 OF 1142
template.2.sip_server.1.port = 5060 template.2.sip_server.1.transport_type = %TRANSPORT% template.2.sip_server.1.expires = 3600 template.2.sip_server.1.retry_counts = template.2.sip_server.2.address = template.2.sip_server.2.port = template.2.sip_server.2.transport_type = template.2.sip_server.2.expires = template.2.sip_server.2.retry_counts = template.2.outbound.1.address= %SBC_ADDRESS% template.2.outbound.1.port= %SBC_PORT% template.2.outbound.2.address= template.2.outbound.2.port= template.2.outbound.enable= %USE_SBC_BOOLEAN% template.2.outbound.fallback_interval=
template.3.name = template.3.sip_server.1.address = %BWHOST-3% template.3.sip_server.1.port = 5060 template.3.sip_server.1.transport_type = %TRANSPORT% template.3.sip_server.1.expires = 3600 template.3.sip_server.1.retry_counts = template.3.sip_server.2.address = template.3.sip_server.2.port = template.3.sip_server.2.transport_type = template.3.sip_server.2.expires = template.3.sip_server.2.retry_counts = template.3.outbound.1.address= %SBC_ADDRESS% template.3.outbound.1.port= %SBC_PORT% template.3.outbound.2.address= template.3.outbound.2.port= template.3.outbound.enable= %USE_SBC_BOOLEAN% template.3.outbound.fallback_interval=
template.4.name = template.4.sip_server.1.address = %BWHOST-4% template.4.sip_server.1.port = 5060 template.4.sip_server.1.transport_type = %TRANSPORT% template.4.sip_server.1.expires = 3600 template.4.sip_server.1.retry_counts = template.4.sip_server.2.address = template.4.sip_server.2.port = template.4.sip_server.2.transport_type = template.4.sip_server.2.expires = template.4.sip_server.2.retry_counts = template.4.outbound.1.address= %SBC_ADDRESS% template.4.outbound.1.port= %SBC_PORT% template.4.outbound.2.address= template.4.outbound.2.port= template.4.outbound.enable= %USE_SBC_BOOLEAN% template.4.outbound.fallback_interval=
template.5.name = template.5.sip_server.1.address = %BWHOST-5% template.5.sip_server.1.port = 5060 template.5.sip_server.1.transport_type = %TRANSPORT% template.5.sip_server.1.expires = 3600 template.5.sip_server.1.retry_counts = template.5.sip_server.2.address = template.5.sip_server.2.port = template.5.sip_server.2.transport_type = template.5.sip_server.2.expires = template.5.sip_server.2.retry_counts =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE
©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 73 OF 1142
template.5.outbound.1.address= %SBC_ADDRESS% template.5.outbound.1.port= %SBC_PORT% template.5.outbound.2.address= template.5.outbound.2.port= template.5.outbound.enable= %USE_SBC_BOOLEAN% template.5.outbound.fallback_interval=
template.6.name = template.6.sip_server.1.address = %BWHOST-6% template.6.sip_server.1.port = 5060 template.6.sip_server.1.transport_type = %TRANSPORT% template.6.sip_server.1.expires = 3600 template.6.sip_server.1.retry_counts = template.6.sip_server.2.address = template.6.sip_server.2.port = template.6.sip_server.2.transport_type = template.6.sip_server.2.expires = template.6.sip_server.2.retry_counts = template.6.outbound.1.address= %SBC_ADDRESS% template.6.outbound.1.port= %SBC_PORT% template.6.outbound.2.address= template.6.outbound.2.port= template.6.outbound.enable= %USE_SBC_BOOLEAN% template.6.outbound.fallback_interval=
template.7.name = template.7.sip_server.1.address = %BWHOST-7% template.7.sip_server.1.port = 5060 template.7.sip_server.1.transport_type = %TRANSPORT% template.7.sip_server.1.expires = 3600 template.7.sip_server.1.retry_counts = template.7.sip_server.2.address = template.7.sip_server.2.port = template.7.sip_server.2.transport_type = template.7.sip_server.2.expires = template.7.sip_server.2.retry_counts = template.7.outbound.1.address= %SBC_ADDRESS% template.7.outbound.1.port= %SBC_PORT% template.7.outbound.2.address= template.7.outbound.2.port= template.7.outbound.enable= %USE_SBC_BOOLEAN% template.7.outbound.fallback_interval=
template.8.name = template.8.sip_server.1.address = %BWHOST-8% template.8.sip_server.1.port = 5060 template.8.sip_server.1.transport_type = %TRANSPORT% template.8.sip_server.1.expires = 3600 template.8.sip_server.1.retry_counts = template.8.sip_server.2.address = template.8.sip_server.2.port = template.8.sip_server.2.transport_type = template.8.sip_server.2.expires = template.8.sip_server.2.retry_counts = template.8.outbound.1.address= %SBC_ADDRESS% template.8.outbound.1.port= %SBC_PORT% template.8.outbound.2.address= template.8.outbound.2.port= template.8.outbound.enable= %USE_SBC_BOOLEAN% template.8.outbound.fallback_interval=
template.9.name = template.9.sip_server.1.address = %BWHOST-9%
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE
©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 74 OF 1142
template.9.sip_server.1.port = 5060 template.9.sip_server.1.transport_type = %TRANSPORT% template.9.sip_server.1.expires = 3600 template.9.sip_server.1.retry_counts = template.9.sip_server.2.address = template.9.sip_server.2.port = template.9.sip_server.2.transport_type = template.9.sip_server.2.expires = template.9.sip_server.2.retry_counts = template.9.outbound.1.address= %SBC_ADDRESS% template.9.outbound.1.port= %SBC_PORT% template.9.outbound.2.address= template.9.outbound.2.port= template.9.outbound.enable= %USE_SBC_BOOLEAN% template.9.outbound.fallback_interval=
template.10.name = template.10.sip_server.1.address = %BWHOST-10% template.10.sip_server.1.port = 5060 template.10.sip_server.1.transport_type = %TRANSPORT% template.10.sip_server.1.expires = 3600 template.10.sip_server.1.retry_counts = template.10.sip_server.2.address = template.10.sip_server.2.port = template.10.sip_server.2.transport_type = template.10.sip_server.2.expires = template.10.sip_server.2.retry_counts = template.10.outbound.1.address= %SBC_ADDRESS% template.10.outbound.1.port= %SBC_PORT% template.10.outbound.2.address= template.10.outbound.2.port= template.10.outbound.enable= %USE_SBC_BOOLEAN% template.10.outbound.fallback_interval=
##########################################################################
#############
##
Account1 Settings
##
##########################################################################
#############
account.1.enable=%BWLINE-BINARY-1% account.1.label=%BWEXTENSION-1% account.1.display_name=%BWCLID-1% account.1.auth_name=%BWAUTHUSER-1% account.1.user_name=%BWLINEPORT-1% account.1.password=%BWAUTHPASSWORD-1%
#W80B ADD account.1.sip_server.template = account.1.media_transmit.enable =
account.1.alarm.template = account.1.alarm.server = account.1.alarm.number =
##########################################################################
#############
##
Failback
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 75 OF 1142
########################################################################## ############# account.1.sip_server.1.failback_mode = account.1.sip_server.1.failback_timeout = account.1.sip_server.1.register_on_enable = account.1.sip_server.1.failback_subscribe.enable = account.1.sip_server.1.invite_retry_counts = account.1.sip_server.1.only_signal_with_registered =
account.1.sip_server.2.failback_mode = account.1.sip_server.2.failback_timeout = account.1.sip_server.2.register_on_enable = account.1.sip_server.2.failback_subscribe.enable = account.1.sip_server.2.invite_retry_counts = account.1.sip_server.2.only_signal_with_registered =
account.1.naptr_build = account.1.fallback.redundancy_type = account.1.fallback.timeout =
account.1.dns_cache_type = account.1.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.1.anonymous_call =
account.1.reject_anonymous_call =
account.1.send_anonymous_code =
account.1.anonymous_call_oncode =
account.1.anonymous_call_offcode =
account.1.send_anonymous_rejection_code =
account.1.anonymous_reject_oncode =
account.1.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.1.codec.g722.enable =
account.1.codec.g722.priority =
account.1.codec.g729.enable = account.1.codec.g729.priority =
account.1.codec.g726_16.enable = account.1.codec.g726_16.priority =
account.1.codec.g726_24.enable = account.1.codec.g726_24.priority =
account.1.codec.g726_32.enable = account.1.codec.g726_32.priority =
account.1.codec.g726_40.enable = account.1.codec.g726_40.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 76 OF 1142
account.1.codec.ilbc.enable = account.1.codec.ilbc.priority =
account.1.codec.pcmu.enable = account.1.codec.pcmu.priority =
account.1.codec.pcma.enable = account.1.codec.pcma.priority =
account.1.codec.opus.enable = account.1.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.1.nat.nat_traversal = account.1.nat.udp_update_enable = account.1.nat.udp_update_time = account.1.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.1.blf.subscribe_period = account.1.dtmf.type = account.1.dtmf.dtmf_payload = account.1.dtmf.info_type = account.1.100rel_enable = account.1.subscribe_register = account.1.subscribe_mwi = account.1.subscribe_mwi_expires = account.1.subscribe_mwi_to_vm = voice_mail.number.1 = %BWVOICE-PORTAL-NUMBER-1% account.1.display_mwi.enable = account.1.cid_source = account.1.cid_source_privacy = account.1.cid_source_ppi = account.1.session_timer.enable = account.1.session_timer.expires = account.1.session_timer.refresher = account.1.enable_user_equal_phone = account.1.srtp_encryption = account.1.ptime = account.1.shared_line = %BWSHAREDLINE-BINARY-1% account.1.register_mac = account.1.register_line = account.1.reg_fail_retry_interval = account.1.reg_failed_retry_min_time = account.1.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 77 OF 1142
########################################################################## ############# account.1.conf_type = account.1.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-1%
account.1.sip_server_type = account.1.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.1.register_expires_overlap = account.1.subscribe_expires_overlap = account.1.auto_dial_enable = account.1.auto_dial_num = account.1.cp_source = account.1.transfer_refer_to_contact_header.enable = #V80 Add account.1.custom_ua = account.1.callpark_enable = account.1.check_cseq.enable = account.1.check_to_tag.enable = account.1.hold_use_inactive = account.1.line_seize.expires = account.1.update_ack_while_dialing = account.1.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.1.always_fwd.enable =
account.1.always_fwd.target =
account.1.always_fwd.off_code =
account.1.always_fwd.on_code =
account.1.busy_fwd.enable =
account.1.busy_fwd.target =
account.1.busy_fwd.off_code =
account.1.busy_fwd.on_code =
account.1.timeout_fwd.enable =
account.1.timeout_fwd.target =
account.1.timeout_fwd.timeout =
account.1.timeout_fwd.off_code =
account.1.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.1.dnd.enable =
account.1.dnd.on_code =
account.1.dnd.off_code =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 78 OF 1142
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.1.reg.enable =
handset.1.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.1.xsi.user =%BWLOGIN-ID-1% account.1.xsi.password =%XSIPASSWORD-1% account.1.xsi.host =%XSP_ADDRESS% account.1.xsi.server_type = account.1.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.1.ldap.enable =
handset.1.ldap.name_filter=
handset.1.ldap.number_filter=
handset.1.ldap.host=
handset.1.ldap.port=
handset.1.ldap.base=
handset.1.ldap.user=
handset.1.ldap.password=
handset.1.ldap.max_hits=
handset.1.ldap.name_attr=
handset.1.ldap.numb_attr=
handset.1.ldap.display_name=
handset.1.ldap.version=
handset.1.ldap.call_in_lookup=
handset.1.ldap.ldap_sort=
handset.1.ldap.tls_mode=
handset.1.ldap.call_out_lookup=
handset.1.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account2 Settings
##
##########################################################################
#############
account.2.enable=%BWLINE-BINARY-2% account.2.label=%BWEXTENSION-2% account.2.display_name=%BWCLID-2% account.2.auth_name=%BWAUTHUSER-2%
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 79 OF 1142
account.2.user_name=%BWLINEPORT-2% account.2.password=%BWAUTHPASSWORD-2%
#W80B ADD account.2.sip_server.template = account.2.media_transmit.enable =
account.2.alarm.template = account.2.alarm.server = account.2.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.2.sip_server.1.failback_mode =
account.2.sip_server.1.failback_timeout =
account.2.sip_server.1.register_on_enable =
account.2.sip_server.1.failback_subscribe.enable =
account.2.sip_server.1.invite_retry_counts =
account.2.sip_server.1.only_signal_with_registered =
account.2.sip_server.2.failback_mode = account.2.sip_server.2.failback_timeout = account.2.sip_server.2.register_on_enable = account.2.sip_server.2.failback_subscribe.enable = account.2.sip_server.2.invite_retry_counts = account.2.sip_server.2.only_signal_with_registered =
account.2.naptr_build = account.2.fallback.redundancy_type = account.2.fallback.timeout =
account.2.dns_cache_type = account.2.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.2.anonymous_call =
account.2.reject_anonymous_call =
account.2.send_anonymous_code =
account.2.anonymous_call_oncode =
account.2.anonymous_call_offcode =
account.2.send_anonymous_rejection_code =
account.2.anonymous_reject_oncode =
account.2.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.2.codec.g722.enable =
account.2.codec.g722.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 80 OF 1142
account.2.codec.g729.enable = account.2.codec.g729.priority =
account.2.codec.g726_16.enable = account.2.codec.g726_16.priority =
account.2.codec.g726_24.enable = account.2.codec.g726_24.priority =
account.2.codec.g726_32.enable = account.2.codec.g726_32.priority =
account.2.codec.g726_40.enable = account.2.codec.g726_40.priority =
account.2.codec.ilbc.enable = account.2.codec.ilbc.priority =
account.2.codec.pcmu.enable = account.2.codec.pcmu.priority =
account.2.codec.pcma.enable = account.2.codec.pcma.priority =
account.2.codec.opus.enable = account.2.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.2.nat.nat_traversal = account.2.nat.udp_update_enable = account.2.nat.udp_update_time = account.2.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.2.blf.subscribe_period = account.2.dtmf.type = account.2.dtmf.dtmf_payload = account.2.dtmf.info_type = account.2.100rel_enable = account.2.subscribe_register = account.2.subscribe_mwi = account.2.subscribe_mwi_expires = account.2.subscribe_mwi_to_vm = voice_mail.number.2 = %BWVOICE-PORTAL-NUMBER-2% account.2.display_mwi.enable = account.2.cid_source = account.2.cid_source_privacy = account.2.cid_source_ppi = account.2.session_timer.enable = account.2.session_timer.expires = account.2.session_timer.refresher =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 81 OF 1142
account.2.enable_user_equal_phone = account.2.srtp_encryption = account.2.ptime = account.2.shared_line = %BWSHAREDLINE-BINARY-2% account.2.register_mac = account.2.register_line = account.2.reg_fail_retry_interval = account.2.reg_failed_retry_min_time = account.2.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.2.conf_type =
account.2.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-2%
account.2.sip_server_type = account.2.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.2.register_expires_overlap = account.2.subscribe_expires_overlap = account.2.auto_dial_enable = account.2.auto_dial_num = account.2.cp_source = account.2.transfer_refer_to_contact_header.enable = #V80 Add account.2.custom_ua = account.2.callpark_enable = account.2.check_cseq.enable = account.2.check_to_tag.enable = account.2.hold_use_inactive = account.2.line_seize.expires = account.2.update_ack_while_dialing = account.2.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.2.always_fwd.enable =
account.2.always_fwd.target =
account.2.always_fwd.off_code =
account.2.always_fwd.on_code =
account.2.busy_fwd.enable =
account.2.busy_fwd.target =
account.2.busy_fwd.off_code =
account.2.busy_fwd.on_code =
account.2.timeout_fwd.enable =
account.2.timeout_fwd.target =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 82 OF 1142
account.2.timeout_fwd.timeout = account.2.timeout_fwd.off_code = account.2.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.2.dnd.enable =
account.2.dnd.on_code =
account.2.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.2.reg.enable =
handset.2.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.2.xsi.user =%BWLOGIN-ID-2% account.2.xsi.password =%XSIPASSWORD-2% account.2.xsi.host =%XSP_ADDRESS% account.2.xsi.server_type = account.2.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.2.ldap.enable =
handset.2.ldap.name_filter=
handset.2.ldap.number_filter=
handset.2.ldap.host=
handset.2.ldap.port=
handset.2.ldap.base=
handset.2.ldap.user=
handset.2.ldap.password=
handset.2.ldap.max_hits=
handset.2.ldap.name_attr=
handset.2.ldap.numb_attr=
handset.2.ldap.display_name=
handset.2.ldap.version=
handset.2.ldap.call_in_lookup=
handset.2.ldap.ldap_sort=
handset.2.ldap.tls_mode=
handset.2.ldap.call_out_lookup=
handset.2.ldap.incoming_call_special_search.enable=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 83 OF 1142
##########################################################################
#############
##
Account3 Settings
##
##########################################################################
#############
account.3.enable=%BWLINE-BINARY-3% account.3.label=%BWEXTENSION-3% account.3.display_name=%BWCLID-3% account.3.auth_name=%BWAUTHUSER-3% account.3.user_name=%BWLINEPORT-3% account.3.password=%BWAUTHPASSWORD-3%
#W80B ADD account.3.sip_server.template = account.3.media_transmit.enable =
account.3.alarm.template = account.3.alarm.server = account.3.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.3.sip_server.1.failback_mode =
account.3.sip_server.1.failback_timeout =
account.3.sip_server.1.register_on_enable =
account.3.sip_server.1.failback_subscribe.enable =
account.3.sip_server.1.invite_retry_counts =
account.3.sip_server.1.only_signal_with_registered =
account.3.sip_server.2.failback_mode = account.3.sip_server.2.failback_timeout = account.3.sip_server.2.register_on_enable = account.3.sip_server.2.failback_subscribe.enable = account.3.sip_server.2.invite_retry_counts = account.3.sip_server.2.only_signal_with_registered =
account.3.naptr_build = account.3.fallback.redundancy_type = account.3.fallback.timeout =
account.3.dns_cache_type = account.3.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.3.anonymous_call =
account.3.reject_anonymous_call =
account.3.send_anonymous_code =
account.3.anonymous_call_oncode =
account.3.anonymous_call_offcode =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 84 OF 1142
account.3.send_anonymous_rejection_code = account.3.anonymous_reject_oncode = account.3.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.3.codec.g722.enable =
account.3.codec.g722.priority =
account.3.codec.g729.enable = account.3.codec.g729.priority =
account.3.codec.g726_16.enable = account.3.codec.g726_16.priority =
account.3.codec.g726_24.enable = account.3.codec.g726_24.priority =
account.3.codec.g726_32.enable = account.3.codec.g726_32.priority =
account.3.codec.g726_40.enable = account.3.codec.g726_40.priority =
account.3.codec.ilbc.enable = account.3.codec.ilbc.priority =
account.3.codec.pcmu.enable = account.3.codec.pcmu.priority =
account.3.codec.pcma.enable = account.3.codec.pcma.priority =
account.3.codec.opus.enable = account.3.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.3.nat.nat_traversal = account.3.nat.udp_update_enable = account.3.nat.udp_update_time = account.3.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.3.blf.subscribe_period = account.3.dtmf.type = account.3.dtmf.dtmf_payload =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 85 OF 1142
account.3.dtmf.info_type = account.3.100rel_enable = account.3.subscribe_register = account.3.subscribe_mwi = account.3.subscribe_mwi_expires = account.3.subscribe_mwi_to_vm = voice_mail.number.3 = %BWVOICE-PORTAL-NUMBER-3% account.3.display_mwi.enable = account.3.cid_source = account.3.cid_source_privacy = account.3.cid_source_ppi = account.3.session_timer.enable = account.3.session_timer.expires = account.3.session_timer.refresher = account.3.enable_user_equal_phone = account.3.srtp_encryption = account.3.ptime = account.3.shared_line = %BWSHAREDLINE-BINARY-3% account.3.register_mac = account.3.register_line = account.3.reg_fail_retry_interval = account.3.reg_failed_retry_min_time = account.3.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.3.conf_type =
account.3.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-3%
account.3.sip_server_type = account.3.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.3.register_expires_overlap = account.3.subscribe_expires_overlap = account.3.auto_dial_enable = account.3.auto_dial_num = account.3.cp_source = account.3.transfer_refer_to_contact_header.enable = #V80 Add account.3.custom_ua = account.3.callpark_enable = account.3.check_cseq.enable = account.3.check_to_tag.enable = account.3.hold_use_inactive = account.3.line_seize.expires = account.3.update_ack_while_dialing = account.3.sub_fail_retry_interval =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 86 OF 1142
##
Call Forward
##
##########################################################################
#############
account.3.always_fwd.enable =
account.3.always_fwd.target =
account.3.always_fwd.off_code =
account.3.always_fwd.on_code =
account.3.busy_fwd.enable =
account.3.busy_fwd.target =
account.3.busy_fwd.off_code =
account.3.busy_fwd.on_code =
account.3.timeout_fwd.enable =
account.3.timeout_fwd.target =
account.3.timeout_fwd.timeout =
account.3.timeout_fwd.off_code =
account.3.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.3.dnd.enable =
account.3.dnd.on_code =
account.3.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.3.reg.enable =
handset.3.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.3.xsi.user =%BWLOGIN-ID-3% account.3.xsi.password =%XSIPASSWORD-3% account.3.xsi.host =%XSP_ADDRESS% account.3.xsi.server_type = account.3.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.3.ldap.enable =
handset.3.ldap.name_filter=
handset.3.ldap.number_filter=
handset.3.ldap.host=
handset.3.ldap.port=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 87 OF 1142
handset.3.ldap.base= handset.3.ldap.user= handset.3.ldap.password= handset.3.ldap.max_hits= handset.3.ldap.name_attr= handset.3.ldap.numb_attr= handset.3.ldap.display_name= handset.3.ldap.version= handset.3.ldap.call_in_lookup= handset.3.ldap.ldap_sort= handset.3.ldap.tls_mode= handset.3.ldap.call_out_lookup= handset.3.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account4 Settings
##
##########################################################################
#############
account.4.enable=%BWLINE-BINARY-4% account.4.label=%BWEXTENSION-4% account.4.display_name=%BWCLID-4% account.4.auth_name=%BWAUTHUSER-4% account.4.user_name=%BWLINEPORT-4% account.4.password=%BWAUTHPASSWORD-4%
#W80B ADD account.4.sip_server.template = account.4.media_transmit.enable =
account.4.alarm.template = account.4.alarm.server = account.4.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.4.sip_server.1.failback_mode =
account.4.sip_server.1.failback_timeout =
account.4.sip_server.1.register_on_enable =
account.4.sip_server.1.failback_subscribe.enable =
account.4.sip_server.1.invite_retry_counts =
account.4.sip_server.1.only_signal_with_registered =
account.4.sip_server.2.failback_mode = account.4.sip_server.2.failback_timeout = account.4.sip_server.2.register_on_enable = account.4.sip_server.2.failback_subscribe.enable = account.4.sip_server.2.invite_retry_counts = account.4.sip_server.2.only_signal_with_registered =
account.4.naptr_build = account.4.fallback.redundancy_type = account.4.fallback.timeout =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 88 OF 1142
account.4.dns_cache_type = account.4.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.4.anonymous_call =
account.4.reject_anonymous_call =
account.4.send_anonymous_code =
account.4.anonymous_call_oncode =
account.4.anonymous_call_offcode =
account.4.send_anonymous_rejection_code =
account.4.anonymous_reject_oncode =
account.4.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.4.codec.g722.enable =
account.4.codec.g722.priority =
account.4.codec.g729.enable = account.4.codec.g729.priority =
account.4.codec.g726_16.enable = account.4.codec.g726_16.priority =
account.4.codec.g726_24.enable = account.4.codec.g726_24.priority =
account.4.codec.g726_32.enable = account.4.codec.g726_32.priority =
account.4.codec.g726_40.enable = account.4.codec.g726_40.priority =
account.4.codec.ilbc.enable = account.4.codec.ilbc.priority =
account.4.codec.pcmu.enable = account.4.codec.pcmu.priority =
account.4.codec.pcma.enable = account.4.codec.pcma.priority =
account.4.codec.opus.enable = account.4.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.4.nat.nat_traversal =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 89 OF 1142
account.4.nat.udp_update_enable = account.4.nat.udp_update_time = account.4.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.4.blf.subscribe_period = account.4.dtmf.type = account.4.dtmf.dtmf_payload = account.4.dtmf.info_type = account.4.100rel_enable = account.4.subscribe_register = account.4.subscribe_mwi = account.4.subscribe_mwi_expires = account.4.subscribe_mwi_to_vm = voice_mail.number.4 = %BWVOICE-PORTAL-NUMBER-4% account.4.display_mwi.enable = account.4.cid_source = account.4.cid_source_privacy = account.4.cid_source_ppi = account.4.session_timer.enable = account.4.session_timer.expires = account.4.session_timer.refresher = account.4.enable_user_equal_phone = account.4.srtp_encryption = account.4.ptime = account.4.shared_line = %BWSHAREDLINE-BINARY-4% account.4.register_mac = account.4.register_line = account.4.reg_fail_retry_interval = account.4.reg_failed_retry_min_time = account.4.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.4.conf_type =
account.4.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-4%
account.4.sip_server_type = account.4.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.4.register_expires_overlap = account.4.subscribe_expires_overlap = account.4.auto_dial_enable = account.4.auto_dial_num =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 90 OF 1142
account.4.cp_source = account.4.transfer_refer_to_contact_header.enable = #V80 Add account.4.custom_ua = account.4.callpark_enable = account.4.check_cseq.enable = account.4.check_to_tag.enable = account.4.hold_use_inactive = account.4.line_seize.expires = account.4.update_ack_while_dialing = account.4.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.4.always_fwd.enable =
account.4.always_fwd.target =
account.4.always_fwd.off_code =
account.4.always_fwd.on_code =
account.4.busy_fwd.enable =
account.4.busy_fwd.target =
account.4.busy_fwd.off_code =
account.4.busy_fwd.on_code =
account.4.timeout_fwd.enable =
account.4.timeout_fwd.target =
account.4.timeout_fwd.timeout =
account.4.timeout_fwd.off_code =
account.4.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.4.dnd.enable =
account.4.dnd.on_code =
account.4.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.4.reg.enable =
handset.4.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.4.xsi.user =%BWLOGIN-ID-4% account.4.xsi.password =%XSIPASSWORD-4% account.4.xsi.host =%XSP_ADDRESS% account.4.xsi.server_type =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 91 OF 1142
account.4.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.4.ldap.enable =
handset.4.ldap.name_filter=
handset.4.ldap.number_filter=
handset.4.ldap.host=
handset.4.ldap.port=
handset.4.ldap.base=
handset.4.ldap.user=
handset.4.ldap.password=
handset.4.ldap.max_hits=
handset.4.ldap.name_attr=
handset.4.ldap.numb_attr=
handset.4.ldap.display_name=
handset.4.ldap.version=
handset.4.ldap.call_in_lookup=
handset.4.ldap.ldap_sort=
handset.4.ldap.tls_mode=
handset.4.ldap.call_out_lookup=
handset.4.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account5 Settings
##
##########################################################################
#############
account.5.enable=%BWLINE-BINARY-5% account.5.label=%BWEXTENSION-5% account.5.display_name=%BWCLID-5% account.5.auth_name=%BWAUTHUSER-5% account.5.user_name=%BWLINEPORT-5% account.5.password=%BWAUTHPASSWORD-5%
#W80B ADD account.5.sip_server.template = account.5.media_transmit.enable =
account.5.alarm.template = account.5.alarm.server = account.5.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.5.sip_server.1.failback_mode =
account.5.sip_server.1.failback_timeout =
account.5.sip_server.1.register_on_enable =
account.5.sip_server.1.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 92 OF 1142
account.5.sip_server.1.invite_retry_counts = account.5.sip_server.1.only_signal_with_registered =
account.5.sip_server.2.failback_mode = account.5.sip_server.2.failback_timeout = account.5.sip_server.2.register_on_enable = account.5.sip_server.2.failback_subscribe.enable = account.5.sip_server.2.invite_retry_counts = account.5.sip_server.2.only_signal_with_registered =
account.5.naptr_build = account.5.fallback.redundancy_type = account.5.fallback.timeout =
account.5.dns_cache_type = account.5.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.5.anonymous_call =
account.5.reject_anonymous_call =
account.5.send_anonymous_code =
account.5.anonymous_call_oncode =
account.5.anonymous_call_offcode =
account.5.send_anonymous_rejection_code =
account.5.anonymous_reject_oncode =
account.5.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.5.codec.g722.enable =
account.5.codec.g722.priority =
account.5.codec.g729.enable = account.5.codec.g729.priority =
account.5.codec.g726_16.enable = account.5.codec.g726_16.priority =
account.5.codec.g726_24.enable = account.5.codec.g726_24.priority =
account.5.codec.g726_32.enable = account.5.codec.g726_32.priority =
account.5.codec.g726_40.enable = account.5.codec.g726_40.priority =
account.5.codec.ilbc.enable = account.5.codec.ilbc.priority =
account.5.codec.pcmu.enable = account.5.codec.pcmu.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 93 OF 1142
account.5.codec.pcma.enable = account.5.codec.pcma.priority =
account.5.codec.opus.enable = account.5.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.5.nat.nat_traversal = account.5.nat.udp_update_enable = account.5.nat.udp_update_time = account.5.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.5.blf.subscribe_period = account.5.dtmf.type = account.5.dtmf.dtmf_payload = account.5.dtmf.info_type = account.5.100rel_enable = account.5.subscribe_register = account.5.subscribe_mwi = account.5.subscribe_mwi_expires = account.5.subscribe_mwi_to_vm = voice_mail.number.5 = %BWVOICE-PORTAL-NUMBER-5% account.5.display_mwi.enable = account.5.cid_source = account.5.cid_source_privacy = account.5.cid_source_ppi = account.5.session_timer.enable = account.5.session_timer.expires = account.5.session_timer.refresher = account.5.enable_user_equal_phone = account.5.srtp_encryption = account.5.ptime = account.5.shared_line = %BWSHAREDLINE-BINARY-5% account.5.register_mac = account.5.register_line = account.5.reg_fail_retry_interval = account.5.reg_failed_retry_min_time = account.5.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.5.conf_type =
account.5.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-5%
account.5.sip_server_type = account.5.unregister_on_reboot =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 94 OF 1142
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.5.register_expires_overlap = account.5.subscribe_expires_overlap = account.5.auto_dial_enable = account.5.auto_dial_num = account.5.cp_source = account.5.transfer_refer_to_contact_header.enable = #V80 Add account.5.custom_ua = account.5.callpark_enable = account.5.check_cseq.enable = account.5.check_to_tag.enable = account.5.hold_use_inactive = account.5.line_seize.expires = account.5.update_ack_while_dialing = account.5.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.5.always_fwd.enable =
account.5.always_fwd.target =
account.5.always_fwd.off_code =
account.5.always_fwd.on_code =
account.5.busy_fwd.enable =
account.5.busy_fwd.target =
account.5.busy_fwd.off_code =
account.5.busy_fwd.on_code =
account.5.timeout_fwd.enable =
account.5.timeout_fwd.target =
account.5.timeout_fwd.timeout =
account.5.timeout_fwd.off_code =
account.5.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.5.dnd.enable =
account.5.dnd.on_code =
account.5.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.5.reg.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 95 OF 1142
handset.5.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.5.xsi.user =%BWLOGIN-ID-5% account.5.xsi.password =%XSIPASSWORD-5% account.5.xsi.host =%XSP_ADDRESS% account.5.xsi.server_type = account.5.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.5.ldap.enable =
handset.5.ldap.name_filter=
handset.5.ldap.number_filter=
handset.5.ldap.host=
handset.5.ldap.port=
handset.5.ldap.base=
handset.5.ldap.user=
handset.5.ldap.password=
handset.5.ldap.max_hits=
handset.5.ldap.name_attr=
handset.5.ldap.numb_attr=
handset.5.ldap.display_name=
handset.5.ldap.version=
handset.5.ldap.call_in_lookup=
handset.5.ldap.ldap_sort=
handset.5.ldap.tls_mode=
handset.5.ldap.call_out_lookup=
handset.5.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account6 Settings
##
##########################################################################
#############
account.6.enable=%BWLINE-BINARY-6% account.6.label=%BWEXTENSION-6% account.6.display_name=%BWCLID-6% account.6.auth_name=%BWAUTHUSER-6% account.6.user_name=%BWLINEPORT-6% account.6.password=%BWAUTHPASSWORD-6%
#W80B ADD account.6.sip_server.template = account.6.media_transmit.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 96 OF 1142
account.6.alarm.template = account.6.alarm.server = account.6.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.6.sip_server.1.failback_mode =
account.6.sip_server.1.failback_timeout =
account.6.sip_server.1.register_on_enable =
account.6.sip_server.1.failback_subscribe.enable =
account.6.sip_server.1.invite_retry_counts =
account.6.sip_server.1.only_signal_with_registered =
account.6.sip_server.2.failback_mode = account.6.sip_server.2.failback_timeout = account.6.sip_server.2.register_on_enable = account.6.sip_server.2.failback_subscribe.enable = account.6.sip_server.2.invite_retry_counts = account.6.sip_server.2.only_signal_with_registered =
account.6.naptr_build = account.6.fallback.redundancy_type = account.6.fallback.timeout =
account.6.dns_cache_type = account.6.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.6.anonymous_call =
account.6.reject_anonymous_call =
account.6.send_anonymous_code =
account.6.anonymous_call_oncode =
account.6.anonymous_call_offcode =
account.6.send_anonymous_rejection_code =
account.6.anonymous_reject_oncode =
account.6.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.6.codec.g722.enable =
account.6.codec.g722.priority =
account.6.codec.g729.enable = account.6.codec.g729.priority =
account.6.codec.g726_16.enable = account.6.codec.g726_16.priority =
account.6.codec.g726_24.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 97 OF 1142
account.6.codec.g726_24.priority =
account.6.codec.g726_32.enable = account.6.codec.g726_32.priority =
account.6.codec.g726_40.enable = account.6.codec.g726_40.priority =
account.6.codec.ilbc.enable = account.6.codec.ilbc.priority =
account.6.codec.pcmu.enable = account.6.codec.pcmu.priority =
account.6.codec.pcma.enable = account.6.codec.pcma.priority =
account.6.codec.opus.enable = account.6.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.6.nat.nat_traversal = account.6.nat.udp_update_enable = account.6.nat.udp_update_time = account.6.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.6.blf.subscribe_period = account.6.dtmf.type = account.6.dtmf.dtmf_payload = account.6.dtmf.info_type = account.6.100rel_enable = account.6.subscribe_register = account.6.subscribe_mwi = account.6.subscribe_mwi_expires = account.6.subscribe_mwi_to_vm = voice_mail.number.6 = %BWVOICE-PORTAL-NUMBER-6% account.6.display_mwi.enable = account.6.cid_source = account.6.cid_source_privacy = account.6.cid_source_ppi = account.6.session_timer.enable = account.6.session_timer.expires = account.6.session_timer.refresher = account.6.enable_user_equal_phone = account.6.srtp_encryption = account.6.ptime = account.6.shared_line = %BWSHAREDLINE-BINARY-6% account.6.register_mac = account.6.register_line = account.6.reg_fail_retry_interval =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 98 OF 1142
account.6.reg_failed_retry_min_time = account.6.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.6.conf_type =
account.6.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-6%
account.6.sip_server_type = account.6.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.6.register_expires_overlap = account.6.subscribe_expires_overlap = account.6.auto_dial_enable = account.6.auto_dial_num = account.6.cp_source = account.6.transfer_refer_to_contact_header.enable = #V80 Add account.6.custom_ua = account.6.callpark_enable = account.6.check_cseq.enable = account.6.check_to_tag.enable = account.6.hold_use_inactive = account.6.line_seize.expires = account.6.update_ack_while_dialing = account.6.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.6.always_fwd.enable =
account.6.always_fwd.target =
account.6.always_fwd.off_code =
account.6.always_fwd.on_code =
account.6.busy_fwd.enable =
account.6.busy_fwd.target =
account.6.busy_fwd.off_code =
account.6.busy_fwd.on_code =
account.6.timeout_fwd.enable =
account.6.timeout_fwd.target =
account.6.timeout_fwd.timeout =
account.6.timeout_fwd.off_code =
account.6.timeout_fwd.on_code =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 99 OF 1142
##
DND
##
##########################################################################
#############
account.6.dnd.enable =
account.6.dnd.on_code =
account.6.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.6.reg.enable =
handset.6.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.6.xsi.user =%BWLOGIN-ID-6% account.6.xsi.password =%XSIPASSWORD-6% account.6.xsi.host =%XSP_ADDRESS% account.6.xsi.server_type = account.6.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.6.ldap.enable =
handset.6.ldap.name_filter=
handset.6.ldap.number_filter=
handset.6.ldap.host=
handset.6.ldap.port=
handset.6.ldap.base=
handset.6.ldap.user=
handset.6.ldap.password=
handset.6.ldap.max_hits=
handset.6.ldap.name_attr=
handset.6.ldap.numb_attr=
handset.6.ldap.display_name=
handset.6.ldap.version=
handset.6.ldap.call_in_lookup=
handset.6.ldap.ldap_sort=
handset.6.ldap.tls_mode=
handset.6.ldap.call_out_lookup=
handset.6.ldap.incoming_call_special_search.enable=
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 100 OF 1142
##
Account7 Settings
##
##########################################################################
#############
account.7.enable=%BWLINE-BINARY-7% account.7.label=%BWEXTENSION-7% account.7.display_name=%BWCLID-7% account.7.auth_name=%BWAUTHUSER-7% account.7.user_name=%BWLINEPORT-7% account.7.password=%BWAUTHPASSWORD-7%
#W80B ADD account.7.sip_server.template = account.7.media_transmit.enable =
account.7.alarm.template = account.7.alarm.server = account.7.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.7.sip_server.1.failback_mode =
account.7.sip_server.1.failback_timeout =
account.7.sip_server.1.register_on_enable =
account.7.sip_server.1.failback_subscribe.enable =
account.7.sip_server.1.invite_retry_counts =
account.7.sip_server.1.only_signal_with_registered =
account.7.sip_server.2.failback_mode = account.7.sip_server.2.failback_timeout = account.7.sip_server.2.register_on_enable = account.7.sip_server.2.failback_subscribe.enable = account.7.sip_server.2.invite_retry_counts = account.7.sip_server.2.only_signal_with_registered =
account.7.naptr_build = account.7.fallback.redundancy_type = account.7.fallback.timeout =
account.7.dns_cache_type = account.7.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.7.anonymous_call =
account.7.reject_anonymous_call =
account.7.send_anonymous_code =
account.7.anonymous_call_oncode =
account.7.anonymous_call_offcode =
account.7.send_anonymous_rejection_code =
account.7.anonymous_reject_oncode =
account.7.anonymous_reject_offcode =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 101 OF 1142
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.7.codec.g722.enable =
account.7.codec.g722.priority =
account.7.codec.g729.enable = account.7.codec.g729.priority =
account.7.codec.g726_16.enable = account.7.codec.g726_16.priority =
account.7.codec.g726_24.enable = account.7.codec.g726_24.priority =
account.7.codec.g726_32.enable = account.7.codec.g726_32.priority =
account.7.codec.g726_40.enable = account.7.codec.g726_40.priority =
account.7.codec.ilbc.enable = account.7.codec.ilbc.priority =
account.7.codec.pcmu.enable = account.7.codec.pcmu.priority =
account.7.codec.pcma.enable = account.7.codec.pcma.priority =
account.7.codec.opus.enable = account.7.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.7.nat.nat_traversal = account.7.nat.udp_update_enable = account.7.nat.udp_update_time = account.7.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.7.blf.subscribe_period = account.7.dtmf.type = account.7.dtmf.dtmf_payload = account.7.dtmf.info_type = account.7.100rel_enable = account.7.subscribe_register = account.7.subscribe_mwi = account.7.subscribe_mwi_expires =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 102 OF 1142
account.7.subscribe_mwi_to_vm = voice_mail.number.7 = %BWVOICE-PORTAL-NUMBER-7% account.7.display_mwi.enable = account.7.cid_source = account.7.cid_source_privacy = account.7.cid_source_ppi = account.7.session_timer.enable = account.7.session_timer.expires = account.7.session_timer.refresher = account.7.enable_user_equal_phone = account.7.srtp_encryption = account.7.ptime = account.7.shared_line = %BWSHAREDLINE-BINARY-7% account.7.register_mac = account.7.register_line = account.7.reg_fail_retry_interval = account.7.reg_failed_retry_min_time = account.7.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.7.conf_type =
account.7.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-7%
account.7.sip_server_type = account.7.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.7.register_expires_overlap = account.7.subscribe_expires_overlap = account.7.auto_dial_enable = account.7.auto_dial_num = account.7.cp_source = account.7.transfer_refer_to_contact_header.enable = #V80 Add account.7.custom_ua = account.7.callpark_enable = account.7.check_cseq.enable = account.7.check_to_tag.enable = account.7.hold_use_inactive = account.7.line_seize.expires = account.7.update_ack_while_dialing = account.7.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.7.always_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 103 OF 1142
account.7.always_fwd.target = account.7.always_fwd.off_code = account.7.always_fwd.on_code = account.7.busy_fwd.enable = account.7.busy_fwd.target = account.7.busy_fwd.off_code = account.7.busy_fwd.on_code = account.7.timeout_fwd.enable = account.7.timeout_fwd.target = account.7.timeout_fwd.timeout = account.7.timeout_fwd.off_code = account.7.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.7.dnd.enable =
account.7.dnd.on_code =
account.7.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.7.reg.enable =
handset.7.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.7.xsi.user =%BWLOGIN-ID-7% account.7.xsi.password =%XSIPASSWORD-7% account.7.xsi.host =%XSP_ADDRESS% account.7.xsi.server_type = account.7.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.7.ldap.enable =
handset.7.ldap.name_filter=
handset.7.ldap.number_filter=
handset.7.ldap.host=
handset.7.ldap.port=
handset.7.ldap.base=
handset.7.ldap.user=
handset.7.ldap.password=
handset.7.ldap.max_hits=
handset.7.ldap.name_attr=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 104 OF 1142
handset.7.ldap.numb_attr= handset.7.ldap.display_name= handset.7.ldap.version= handset.7.ldap.call_in_lookup= handset.7.ldap.ldap_sort= handset.7.ldap.tls_mode= handset.7.ldap.call_out_lookup= handset.7.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account8 Settings
##
##########################################################################
#############
account.8.enable=%BWLINE-BINARY-8% account.8.label=%BWEXTENSION-8% account.8.display_name=%BWCLID-8% account.8.auth_name=%BWAUTHUSER-8% account.8.user_name=%BWLINEPORT-8% account.8.password=%BWAUTHPASSWORD-8%
#W80B ADD account.8.sip_server.template = account.8.media_transmit.enable =
account.8.alarm.template = account.8.alarm.server = account.8.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.8.sip_server.1.failback_mode =
account.8.sip_server.1.failback_timeout =
account.8.sip_server.1.register_on_enable =
account.8.sip_server.1.failback_subscribe.enable =
account.8.sip_server.1.invite_retry_counts =
account.8.sip_server.1.only_signal_with_registered =
account.8.sip_server.2.failback_mode = account.8.sip_server.2.failback_timeout = account.8.sip_server.2.register_on_enable = account.8.sip_server.2.failback_subscribe.enable = account.8.sip_server.2.invite_retry_counts = account.8.sip_server.2.only_signal_with_registered =
account.8.naptr_build = account.8.fallback.redundancy_type = account.8.fallback.timeout =
account.8.dns_cache_type = account.8.static_cache_pri = %STATIC-CACHE-PRI%
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 105 OF 1142
##
Basic
##
##########################################################################
#############
account.8.anonymous_call =
account.8.reject_anonymous_call =
account.8.send_anonymous_code =
account.8.anonymous_call_oncode =
account.8.anonymous_call_offcode =
account.8.send_anonymous_rejection_code =
account.8.anonymous_reject_oncode =
account.8.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.8.codec.g722.enable =
account.8.codec.g722.priority =
account.8.codec.g729.enable = account.8.codec.g729.priority =
account.8.codec.g726_16.enable = account.8.codec.g726_16.priority =
account.8.codec.g726_24.enable = account.8.codec.g726_24.priority =
account.8.codec.g726_32.enable = account.8.codec.g726_32.priority =
account.8.codec.g726_40.enable = account.8.codec.g726_40.priority =
account.8.codec.ilbc.enable = account.8.codec.ilbc.priority =
account.8.codec.pcmu.enable = account.8.codec.pcmu.priority =
account.8.codec.pcma.enable = account.8.codec.pcma.priority =
account.8.codec.opus.enable = account.8.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.8.nat.nat_traversal = account.8.nat.udp_update_enable = account.8.nat.udp_update_time = account.8.nat.rport =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 106 OF 1142
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.8.blf.subscribe_period = account.8.dtmf.type = account.8.dtmf.dtmf_payload = account.8.dtmf.info_type = account.8.100rel_enable = account.8.subscribe_register = account.8.subscribe_mwi = account.8.subscribe_mwi_expires = account.8.subscribe_mwi_to_vm = voice_mail.number.8 = %BWVOICE-PORTAL-NUMBER-8% account.8.display_mwi.enable = account.8.cid_source = account.8.cid_source_privacy = account.8.cid_source_ppi = account.8.session_timer.enable = account.8.session_timer.expires = account.8.session_timer.refresher = account.8.enable_user_equal_phone = account.8.srtp_encryption = account.8.ptime = account.8.shared_line = %BWSHAREDLINE-BINARY-8% account.8.register_mac = account.8.register_line = account.8.reg_fail_retry_interval = account.8.reg_failed_retry_min_time = account.8.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.8.conf_type =
account.8.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-8%
account.8.sip_server_type = account.8.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.8.register_expires_overlap = account.8.subscribe_expires_overlap = account.8.auto_dial_enable = account.8.auto_dial_num = account.8.cp_source = account.8.transfer_refer_to_contact_header.enable = #V80 Add account.8.custom_ua =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 107 OF 1142
account.8.callpark_enable = account.8.check_cseq.enable = account.8.check_to_tag.enable = account.8.hold_use_inactive = account.8.line_seize.expires = account.8.update_ack_while_dialing = account.8.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.8.always_fwd.enable =
account.8.always_fwd.target =
account.8.always_fwd.off_code =
account.8.always_fwd.on_code =
account.8.busy_fwd.enable =
account.8.busy_fwd.target =
account.8.busy_fwd.off_code =
account.8.busy_fwd.on_code =
account.8.timeout_fwd.enable =
account.8.timeout_fwd.target =
account.8.timeout_fwd.timeout =
account.8.timeout_fwd.off_code =
account.8.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.8.dnd.enable =
account.8.dnd.on_code =
account.8.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.8.reg.enable =
handset.8.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.8.xsi.user =%BWLOGIN-ID-8% account.8.xsi.password =%XSIPASSWORD-8% account.8.xsi.host =%XSP_ADDRESS% account.8.xsi.server_type = account.8.xsi.port =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 108 OF 1142
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.8.ldap.enable =
handset.8.ldap.name_filter=
handset.8.ldap.number_filter=
handset.8.ldap.host=
handset.8.ldap.port=
handset.8.ldap.base=
handset.8.ldap.user=
handset.8.ldap.password=
handset.8.ldap.max_hits=
handset.8.ldap.name_attr=
handset.8.ldap.numb_attr=
handset.8.ldap.display_name=
handset.8.ldap.version=
handset.8.ldap.call_in_lookup=
handset.8.ldap.ldap_sort=
handset.8.ldap.tls_mode=
handset.8.ldap.call_out_lookup=
handset.8.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account9 Settings
##
##########################################################################
#############
account.9.enable=%BWLINE-BINARY-9% account.9.label=%BWEXTENSION-9% account.9.display_name=%BWCLID-9% account.9.auth_name=%BWAUTHUSER-9% account.9.user_name=%BWLINEPORT-9% account.9.password=%BWAUTHPASSWORD-9%
#W80B ADD account.9.sip_server.template = account.9.media_transmit.enable =
account.9.alarm.template = account.9.alarm.server = account.9.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.9.sip_server.1.failback_mode =
account.9.sip_server.1.failback_timeout =
account.9.sip_server.1.register_on_enable =
account.9.sip_server.1.failback_subscribe.enable =
account.9.sip_server.1.invite_retry_counts =
account.9.sip_server.1.only_signal_with_registered =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 109 OF 1142
account.9.sip_server.2.failback_mode = account.9.sip_server.2.failback_timeout = account.9.sip_server.2.register_on_enable = account.9.sip_server.2.failback_subscribe.enable = account.9.sip_server.2.invite_retry_counts = account.9.sip_server.2.only_signal_with_registered =
account.9.naptr_build = account.9.fallback.redundancy_type = account.9.fallback.timeout =
account.9.dns_cache_type = account.9.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.9.anonymous_call =
account.9.reject_anonymous_call =
account.9.send_anonymous_code =
account.9.anonymous_call_oncode =
account.9.anonymous_call_offcode =
account.9.send_anonymous_rejection_code =
account.9.anonymous_reject_oncode =
account.9.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.9.codec.g722.enable =
account.9.codec.g722.priority =
account.9.codec.g729.enable = account.9.codec.g729.priority =
account.9.codec.g726_16.enable = account.9.codec.g726_16.priority =
account.9.codec.g726_24.enable = account.9.codec.g726_24.priority =
account.9.codec.g726_32.enable = account.9.codec.g726_32.priority =
account.9.codec.g726_40.enable = account.9.codec.g726_40.priority =
account.9.codec.ilbc.enable = account.9.codec.ilbc.priority =
account.9.codec.pcmu.enable = account.9.codec.pcmu.priority =
account.9.codec.pcma.enable = account.9.codec.pcma.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 110 OF 1142
account.9.codec.opus.enable = account.9.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.9.nat.nat_traversal = account.9.nat.udp_update_enable = account.9.nat.udp_update_time = account.9.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.9.blf.subscribe_period = account.9.dtmf.type = account.9.dtmf.dtmf_payload = account.9.dtmf.info_type = account.9.100rel_enable = account.9.subscribe_register = account.9.subscribe_mwi = account.9.subscribe_mwi_expires = account.9.subscribe_mwi_to_vm = voice_mail.number.9 = %BWVOICE-PORTAL-NUMBER-9% account.9.display_mwi.enable = account.9.cid_source = account.9.cid_source_privacy = account.9.cid_source_ppi = account.9.session_timer.enable = account.9.session_timer.expires = account.9.session_timer.refresher = account.9.enable_user_equal_phone = account.9.srtp_encryption = account.9.ptime = account.9.shared_line = %BWSHAREDLINE-BINARY-9% account.9.register_mac = account.9.register_line = account.9.reg_fail_retry_interval = account.9.reg_failed_retry_min_time = account.9.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.9.conf_type =
account.9.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-9%
account.9.sip_server_type = account.9.unregister_on_reboot =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 111 OF 1142
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.9.register_expires_overlap = account.9.subscribe_expires_overlap = account.9.auto_dial_enable = account.9.auto_dial_num = account.9.cp_source = account.9.transfer_refer_to_contact_header.enable = #V80 Add account.9.custom_ua = account.9.callpark_enable = account.9.check_cseq.enable = account.9.check_to_tag.enable = account.9.hold_use_inactive = account.9.line_seize.expires = account.9.update_ack_while_dialing = account.9.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.9.always_fwd.enable =
account.9.always_fwd.target =
account.9.always_fwd.off_code =
account.9.always_fwd.on_code =
account.9.busy_fwd.enable =
account.9.busy_fwd.target =
account.9.busy_fwd.off_code =
account.9.busy_fwd.on_code =
account.9.timeout_fwd.enable =
account.9.timeout_fwd.target =
account.9.timeout_fwd.timeout =
account.9.timeout_fwd.off_code =
account.9.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.9.dnd.enable =
account.9.dnd.on_code =
account.9.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.9.reg.enable =
handset.9.ipui =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 112 OF 1142
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.9.xsi.user =%BWLOGIN-ID-9% account.9.xsi.password =%XSIPASSWORD-9% account.9.xsi.host =%XSP_ADDRESS% account.9.xsi.server_type = account.9.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.9.ldap.enable =
handset.9.ldap.name_filter=
handset.9.ldap.number_filter=
handset.9.ldap.host=
handset.9.ldap.port=
handset.9.ldap.base=
handset.9.ldap.user=
handset.9.ldap.password=
handset.9.ldap.max_hits=
handset.9.ldap.name_attr=
handset.9.ldap.numb_attr=
handset.9.ldap.display_name=
handset.9.ldap.version=
handset.9.ldap.call_in_lookup=
handset.9.ldap.ldap_sort=
handset.9.ldap.tls_mode=
handset.9.ldap.call_out_lookup=
handset.9.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account10 Settings
##
##########################################################################
#############
account.10.enable=%BWLINE-BINARY-10% account.10.label=%BWEXTENSION-10% account.10.display_name=%BWCLID-10% account.10.auth_name=%BWAUTHUSER-10% account.10.user_name=%BWLINEPORT-10% account.10.password=%BWAUTHPASSWORD-10%
#W80B ADD account.10.sip_server.template = account.10.media_transmit.enable =
account.10.alarm.template = account.10.alarm.server =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 113 OF 1142
account.10.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.10.sip_server.1.failback_mode =
account.10.sip_server.1.failback_timeout =
account.10.sip_server.1.register_on_enable =
account.10.sip_server.1.failback_subscribe.enable =
account.10.sip_server.1.invite_retry_counts =
account.10.sip_server.1.only_signal_with_registered =
account.10.sip_server.2.failback_mode = account.10.sip_server.2.failback_timeout = account.10.sip_server.2.register_on_enable = account.10.sip_server.2.failback_subscribe.enable = account.10.sip_server.2.invite_retry_counts = account.10.sip_server.2.only_signal_with_registered =
account.10.naptr_build = account.10.fallback.redundancy_type = account.10.fallback.timeout =
account.10.dns_cache_type = account.10.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.10.anonymous_call =
account.10.reject_anonymous_call =
account.10.send_anonymous_code =
account.10.anonymous_call_oncode =
account.10.anonymous_call_offcode =
account.10.send_anonymous_rejection_code =
account.10.anonymous_reject_oncode =
account.10.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.10.codec.g722.enable =
account.10.codec.g722.priority =
account.10.codec.g729.enable = account.10.codec.g729.priority =
account.10.codec.g726_16.enable = account.10.codec.g726_16.priority =
account.10.codec.g726_24.enable = account.10.codec.g726_24.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 114 OF 1142
account.10.codec.g726_32.enable = account.10.codec.g726_32.priority =
account.10.codec.g726_40.enable = account.10.codec.g726_40.priority =
account.10.codec.ilbc.enable = account.10.codec.ilbc.priority =
account.10.codec.pcmu.enable = account.10.codec.pcmu.priority =
account.10.codec.pcma.enable = account.10.codec.pcma.priority =
account.10.codec.opus.enable = account.10.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.10.nat.nat_traversal = account.10.nat.udp_update_enable = account.10.nat.udp_update_time = account.10.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.10.blf.subscribe_period = account.10.dtmf.type = account.10.dtmf.dtmf_payload = account.10.dtmf.info_type = account.10.100rel_enable = account.10.subscribe_register = account.10.subscribe_mwi = account.10.subscribe_mwi_expires = account.10.subscribe_mwi_to_vm = voice_mail.number.10 = %BWVOICE-PORTAL-NUMBER-10% account.10.display_mwi.enable = account.10.cid_source = account.10.cid_source_privacy = account.10.cid_source_ppi = account.10.session_timer.enable = account.10.session_timer.expires = account.10.session_timer.refresher = account.10.enable_user_equal_phone = account.10.srtp_encryption = account.10.ptime = account.10.shared_line = %BWSHAREDLINE-BINARY-10% account.10.register_mac = account.10.register_line = account.10.reg_fail_retry_interval = account.10.reg_failed_retry_min_time = account.10.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 115 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.10.conf_type =
account.10.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-10%
account.10.sip_server_type = account.10.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.10.register_expires_overlap = account.10.subscribe_expires_overlap = account.10.auto_dial_enable = account.10.auto_dial_num = account.10.cp_source = account.10.transfer_refer_to_contact_header.enable = #V80 Add account.10.custom_ua = account.10.callpark_enable = account.10.check_cseq.enable = account.10.check_to_tag.enable = account.10.hold_use_inactive = account.10.line_seize.expires = account.10.update_ack_while_dialing = account.10.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.10.always_fwd.enable =
account.10.always_fwd.target =
account.10.always_fwd.off_code =
account.10.always_fwd.on_code =
account.10.busy_fwd.enable =
account.10.busy_fwd.target =
account.10.busy_fwd.off_code =
account.10.busy_fwd.on_code =
account.10.timeout_fwd.enable =
account.10.timeout_fwd.target =
account.10.timeout_fwd.timeout =
account.10.timeout_fwd.off_code =
account.10.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 116 OF 1142
########################################################################## ############# account.10.dnd.enable = account.10.dnd.on_code = account.10.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.10.reg.enable =
handset.10.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.10.xsi.user =%BWLOGIN-ID-10% account.10.xsi.password =%XSIPASSWORD-10% account.10.xsi.host =%XSP_ADDRESS% account.10.xsi.server_type = account.10.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.10.ldap.enable =
handset.10.ldap.name_filter=
handset.10.ldap.number_filter=
handset.10.ldap.host=
handset.10.ldap.port=
handset.10.ldap.base=
handset.10.ldap.user=
handset.10.ldap.password=
handset.10.ldap.max_hits=
handset.10.ldap.name_attr=
handset.10.ldap.numb_attr=
handset.10.ldap.display_name=
handset.10.ldap.version=
handset.10.ldap.call_in_lookup=
handset.10.ldap.ldap_sort=
handset.10.ldap.tls_mode=
handset.10.ldap.call_out_lookup=
handset.10.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account11 Settings
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 117 OF 1142
########################################################################## #############
account.11.enable=%BWLINE-BINARY-11% account.11.label=%BWEXTENSION-11% account.11.display_name=%BWCLID-11% account.11.auth_name=%BWAUTHUSER-11% account.11.user_name=%BWLINEPORT-11% account.11.password=%BWAUTHPASSWORD-11%
#W80B ADD account.11.sip_server.template = account.11.media_transmit.enable =
account.11.alarm.template = account.11.alarm.server = account.11.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.11.sip_server.1.failback_mode =
account.11.sip_server.1.failback_timeout =
account.11.sip_server.1.register_on_enable =
account.11.sip_server.1.failback_subscribe.enable =
account.11.sip_server.1.invite_retry_counts =
account.11.sip_server.1.only_signal_with_registered =
account.11.sip_server.2.failback_mode = account.11.sip_server.2.failback_timeout = account.11.sip_server.2.register_on_enable = account.11.sip_server.2.failback_subscribe.enable = account.11.sip_server.2.invite_retry_counts = account.11.sip_server.2.only_signal_with_registered =
account.11.naptr_build = account.11.fallback.redundancy_type = account.11.fallback.timeout =
account.11.dns_cache_type = account.11.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.11.anonymous_call =
account.11.reject_anonymous_call =
account.11.send_anonymous_code =
account.11.anonymous_call_oncode =
account.11.anonymous_call_offcode =
account.11.send_anonymous_rejection_code =
account.11.anonymous_reject_oncode =
account.11.anonymous_reject_offcode =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 118 OF 1142
##
Codec
##
##########################################################################
#############
account.11.codec.g722.enable =
account.11.codec.g722.priority =
account.11.codec.g729.enable = account.11.codec.g729.priority =
account.11.codec.g726_16.enable = account.11.codec.g726_16.priority =
account.11.codec.g726_24.enable = account.11.codec.g726_24.priority =
account.11.codec.g726_32.enable = account.11.codec.g726_32.priority =
account.11.codec.g726_40.enable = account.11.codec.g726_40.priority =
account.11.codec.ilbc.enable = account.11.codec.ilbc.priority =
account.11.codec.pcmu.enable = account.11.codec.pcmu.priority =
account.11.codec.pcma.enable = account.11.codec.pcma.priority =
account.11.codec.opus.enable = account.11.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.11.nat.nat_traversal = account.11.nat.udp_update_enable = account.11.nat.udp_update_time = account.11.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.11.blf.subscribe_period = account.11.dtmf.type = account.11.dtmf.dtmf_payload = account.11.dtmf.info_type = account.11.100rel_enable = account.11.subscribe_register = account.11.subscribe_mwi = account.11.subscribe_mwi_expires = account.11.subscribe_mwi_to_vm = voice_mail.number.11 = %BWVOICE-PORTAL-NUMBER-11%
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 119 OF 1142
account.11.display_mwi.enable = account.11.cid_source = account.11.cid_source_privacy = account.11.cid_source_ppi = account.11.session_timer.enable = account.11.session_timer.expires = account.11.session_timer.refresher = account.11.enable_user_equal_phone = account.11.srtp_encryption = account.11.ptime = account.11.shared_line = %BWSHAREDLINE-BINARY-11% account.11.register_mac = account.11.register_line = account.11.reg_fail_retry_interval = account.11.reg_failed_retry_min_time = account.11.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.11.conf_type =
account.11.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-11%
account.11.sip_server_type = account.11.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.11.register_expires_overlap = account.11.subscribe_expires_overlap = account.11.auto_dial_enable = account.11.auto_dial_num = account.11.cp_source = account.11.transfer_refer_to_contact_header.enable = #V80 Add account.11.custom_ua = account.11.callpark_enable = account.11.check_cseq.enable = account.11.check_to_tag.enable = account.11.hold_use_inactive = account.11.line_seize.expires = account.11.update_ack_while_dialing = account.11.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.11.always_fwd.enable =
account.11.always_fwd.target =
account.11.always_fwd.off_code =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 120 OF 1142
account.11.always_fwd.on_code = account.11.busy_fwd.enable = account.11.busy_fwd.target = account.11.busy_fwd.off_code = account.11.busy_fwd.on_code = account.11.timeout_fwd.enable = account.11.timeout_fwd.target = account.11.timeout_fwd.timeout = account.11.timeout_fwd.off_code = account.11.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.11.dnd.enable =
account.11.dnd.on_code =
account.11.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.11.reg.enable =
handset.11.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.11.xsi.user =%BWLOGIN-ID-11% account.11.xsi.password =%XSIPASSWORD-11% account.11.xsi.host =%XSP_ADDRESS% account.11.xsi.server_type = account.11.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.11.ldap.enable =
handset.11.ldap.name_filter=
handset.11.ldap.number_filter=
handset.11.ldap.host=
handset.11.ldap.port=
handset.11.ldap.base=
handset.11.ldap.user=
handset.11.ldap.password=
handset.11.ldap.max_hits=
handset.11.ldap.name_attr=
handset.11.ldap.numb_attr=
handset.11.ldap.display_name=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 121 OF 1142
handset.11.ldap.version= handset.11.ldap.call_in_lookup= handset.11.ldap.ldap_sort= handset.11.ldap.tls_mode= handset.11.ldap.call_out_lookup= handset.11.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account12 Settings
##
##########################################################################
#############
account.12.enable=%BWLINE-BINARY-12% account.12.label=%BWEXTENSION-12% account.12.display_name=%BWCLID-12% account.12.auth_name=%BWAUTHUSER-12% account.12.user_name=%BWLINEPORT-12% account.12.password=%BWAUTHPASSWORD-12%
#W80B ADD account.12.sip_server.template = account.12.media_transmit.enable =
account.12.alarm.template = account.12.alarm.server = account.12.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.12.sip_server.1.failback_mode =
account.12.sip_server.1.failback_timeout =
account.12.sip_server.1.register_on_enable =
account.12.sip_server.1.failback_subscribe.enable =
account.12.sip_server.1.invite_retry_counts =
account.12.sip_server.1.only_signal_with_registered =
account.12.sip_server.2.failback_mode = account.12.sip_server.2.failback_timeout = account.12.sip_server.2.register_on_enable = account.12.sip_server.2.failback_subscribe.enable = account.12.sip_server.2.invite_retry_counts = account.12.sip_server.2.only_signal_with_registered =
account.12.naptr_build = account.12.fallback.redundancy_type = account.12.fallback.timeout =
account.12.dns_cache_type = account.12.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 122 OF 1142
########################################################################## ############# account.12.anonymous_call = account.12.reject_anonymous_call = account.12.send_anonymous_code = account.12.anonymous_call_oncode = account.12.anonymous_call_offcode = account.12.send_anonymous_rejection_code = account.12.anonymous_reject_oncode = account.12.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.12.codec.g722.enable =
account.12.codec.g722.priority =
account.12.codec.g729.enable = account.12.codec.g729.priority =
account.12.codec.g726_16.enable = account.12.codec.g726_16.priority =
account.12.codec.g726_24.enable = account.12.codec.g726_24.priority =
account.12.codec.g726_32.enable = account.12.codec.g726_32.priority =
account.12.codec.g726_40.enable = account.12.codec.g726_40.priority =
account.12.codec.ilbc.enable = account.12.codec.ilbc.priority =
account.12.codec.pcmu.enable = account.12.codec.pcmu.priority =
account.12.codec.pcma.enable = account.12.codec.pcma.priority =
account.12.codec.opus.enable = account.12.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.12.nat.nat_traversal = account.12.nat.udp_update_enable = account.12.nat.udp_update_time = account.12.nat.rport =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 123 OF 1142
##
Register Advanced
##
##########################################################################
#############
account.12.blf.subscribe_period = account.12.dtmf.type = account.12.dtmf.dtmf_payload = account.12.dtmf.info_type = account.12.100rel_enable = account.12.subscribe_register = account.12.subscribe_mwi = account.12.subscribe_mwi_expires = account.12.subscribe_mwi_to_vm = voice_mail.number.12 = %BWVOICE-PORTAL-NUMBER-12% account.12.display_mwi.enable = account.12.cid_source = account.12.cid_source_privacy = account.12.cid_source_ppi = account.12.session_timer.enable = account.12.session_timer.expires = account.12.session_timer.refresher = account.12.enable_user_equal_phone = account.12.srtp_encryption = account.12.ptime = account.12.shared_line = %BWSHAREDLINE-BINARY-12% account.12.register_mac = account.12.register_line = account.12.reg_fail_retry_interval = account.12.reg_failed_retry_min_time = account.12.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.12.conf_type =
account.12.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-12%
account.12.sip_server_type = account.12.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.12.register_expires_overlap = account.12.subscribe_expires_overlap = account.12.auto_dial_enable = account.12.auto_dial_num = account.12.cp_source = account.12.transfer_refer_to_contact_header.enable = #V80 Add account.12.custom_ua = account.12.callpark_enable = account.12.check_cseq.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 124 OF 1142
account.12.check_to_tag.enable = account.12.hold_use_inactive = account.12.line_seize.expires = account.12.update_ack_while_dialing = account.12.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.12.always_fwd.enable =
account.12.always_fwd.target =
account.12.always_fwd.off_code =
account.12.always_fwd.on_code =
account.12.busy_fwd.enable =
account.12.busy_fwd.target =
account.12.busy_fwd.off_code =
account.12.busy_fwd.on_code =
account.12.timeout_fwd.enable =
account.12.timeout_fwd.target =
account.12.timeout_fwd.timeout =
account.12.timeout_fwd.off_code =
account.12.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.12.dnd.enable =
account.12.dnd.on_code =
account.12.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.12.reg.enable =
handset.12.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.12.xsi.user =%BWLOGIN-ID-12% account.12.xsi.password =%XSIPASSWORD-12% account.12.xsi.host =%XSP_ADDRESS% account.12.xsi.server_type = account.12.xsi.port =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 125 OF 1142
##
LADP
##
##########################################################################
#############
handset.12.ldap.enable =
handset.12.ldap.name_filter=
handset.12.ldap.number_filter=
handset.12.ldap.host=
handset.12.ldap.port=
handset.12.ldap.base=
handset.12.ldap.user=
handset.12.ldap.password=
handset.12.ldap.max_hits=
handset.12.ldap.name_attr=
handset.12.ldap.numb_attr=
handset.12.ldap.display_name=
handset.12.ldap.version=
handset.12.ldap.call_in_lookup=
handset.12.ldap.ldap_sort=
handset.12.ldap.tls_mode=
handset.12.ldap.call_out_lookup=
handset.12.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account13 Settings
##
##########################################################################
#############
account.13.enable=%BWLINE-BINARY-13% account.13.label=%BWEXTENSION-13% account.13.display_name=%BWCLID-13% account.13.auth_name=%BWAUTHUSER-13% account.13.user_name=%BWLINEPORT-13% account.13.password=%BWAUTHPASSWORD-13%
#W80B ADD account.13.sip_server.template = account.13.media_transmit.enable =
account.13.alarm.template = account.13.alarm.server = account.13.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.13.sip_server.1.failback_mode =
account.13.sip_server.1.failback_timeout =
account.13.sip_server.1.register_on_enable =
account.13.sip_server.1.failback_subscribe.enable =
account.13.sip_server.1.invite_retry_counts =
account.13.sip_server.1.only_signal_with_registered =
account.13.sip_server.2.failback_mode = account.13.sip_server.2.failback_timeout =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 126 OF 1142
account.13.sip_server.2.register_on_enable = account.13.sip_server.2.failback_subscribe.enable = account.13.sip_server.2.invite_retry_counts = account.13.sip_server.2.only_signal_with_registered =
account.13.naptr_build = account.13.fallback.redundancy_type = account.13.fallback.timeout =
account.13.dns_cache_type = account.13.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.13.anonymous_call =
account.13.reject_anonymous_call =
account.13.send_anonymous_code =
account.13.anonymous_call_oncode =
account.13.anonymous_call_offcode =
account.13.send_anonymous_rejection_code =
account.13.anonymous_reject_oncode =
account.13.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.13.codec.g722.enable =
account.13.codec.g722.priority =
account.13.codec.g729.enable = account.13.codec.g729.priority =
account.13.codec.g726_16.enable = account.13.codec.g726_16.priority =
account.13.codec.g726_24.enable = account.13.codec.g726_24.priority =
account.13.codec.g726_32.enable = account.13.codec.g726_32.priority =
account.13.codec.g726_40.enable = account.13.codec.g726_40.priority =
account.13.codec.ilbc.enable = account.13.codec.ilbc.priority =
account.13.codec.pcmu.enable = account.13.codec.pcmu.priority =
account.13.codec.pcma.enable = account.13.codec.pcma.priority =
account.13.codec.opus.enable = account.13.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 127 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.13.nat.nat_traversal = account.13.nat.udp_update_enable = account.13.nat.udp_update_time = account.13.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.13.blf.subscribe_period = account.13.dtmf.type = account.13.dtmf.dtmf_payload = account.13.dtmf.info_type = account.13.100rel_enable = account.13.subscribe_register = account.13.subscribe_mwi = account.13.subscribe_mwi_expires = account.13.subscribe_mwi_to_vm = voice_mail.number.13 = %BWVOICE-PORTAL-NUMBER-13% account.13.display_mwi.enable = account.13.cid_source = account.13.cid_source_privacy = account.13.cid_source_ppi = account.13.session_timer.enable = account.13.session_timer.expires = account.13.session_timer.refresher = account.13.enable_user_equal_phone = account.13.srtp_encryption = account.13.ptime = account.13.shared_line = %BWSHAREDLINE-BINARY-13% account.13.register_mac = account.13.register_line = account.13.reg_fail_retry_interval = account.13.reg_failed_retry_min_time = account.13.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.13.conf_type =
account.13.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-13%
account.13.sip_server_type = account.13.unregister_on_reboot =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 128 OF 1142
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.13.register_expires_overlap = account.13.subscribe_expires_overlap = account.13.auto_dial_enable = account.13.auto_dial_num = account.13.cp_source = account.13.transfer_refer_to_contact_header.enable = #V80 Add account.13.custom_ua = account.13.callpark_enable = account.13.check_cseq.enable = account.13.check_to_tag.enable = account.13.hold_use_inactive = account.13.line_seize.expires = account.13.update_ack_while_dialing = account.13.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.13.always_fwd.enable =
account.13.always_fwd.target =
account.13.always_fwd.off_code =
account.13.always_fwd.on_code =
account.13.busy_fwd.enable =
account.13.busy_fwd.target =
account.13.busy_fwd.off_code =
account.13.busy_fwd.on_code =
account.13.timeout_fwd.enable =
account.13.timeout_fwd.target =
account.13.timeout_fwd.timeout =
account.13.timeout_fwd.off_code =
account.13.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.13.dnd.enable =
account.13.dnd.on_code =
account.13.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.13.reg.enable =
handset.13.ipui =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 129 OF 1142
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.13.xsi.user =%BWLOGIN-ID-13% account.13.xsi.password =%XSIPASSWORD-13% account.13.xsi.host =%XSP_ADDRESS% account.13.xsi.server_type = account.13.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.13.ldap.enable =
handset.13.ldap.name_filter=
handset.13.ldap.number_filter=
handset.13.ldap.host=
handset.13.ldap.port=
handset.13.ldap.base=
handset.13.ldap.user=
handset.13.ldap.password=
handset.13.ldap.max_hits=
handset.13.ldap.name_attr=
handset.13.ldap.numb_attr=
handset.13.ldap.display_name=
handset.13.ldap.version=
handset.13.ldap.call_in_lookup=
handset.13.ldap.ldap_sort=
handset.13.ldap.tls_mode=
handset.13.ldap.call_out_lookup=
handset.13.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account14 Settings
##
##########################################################################
#############
account.14.enable=%BWLINE-BINARY-14% account.14.label=%BWEXTENSION-14% account.14.display_name=%BWCLID-14% account.14.auth_name=%BWAUTHUSER-14% account.14.user_name=%BWLINEPORT-14% account.14.password=%BWAUTHPASSWORD-14%
#W80B ADD account.14.sip_server.template = account.14.media_transmit.enable =
account.14.alarm.template = account.14.alarm.server = account.14.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 130 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.14.sip_server.1.failback_mode =
account.14.sip_server.1.failback_timeout =
account.14.sip_server.1.register_on_enable =
account.14.sip_server.1.failback_subscribe.enable =
account.14.sip_server.1.invite_retry_counts =
account.14.sip_server.1.only_signal_with_registered =
account.14.sip_server.2.failback_mode = account.14.sip_server.2.failback_timeout = account.14.sip_server.2.register_on_enable = account.14.sip_server.2.failback_subscribe.enable = account.14.sip_server.2.invite_retry_counts = account.14.sip_server.2.only_signal_with_registered =
account.14.naptr_build = account.14.fallback.redundancy_type = account.14.fallback.timeout =
account.14.dns_cache_type = account.14.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.14.anonymous_call =
account.14.reject_anonymous_call =
account.14.send_anonymous_code =
account.14.anonymous_call_oncode =
account.14.anonymous_call_offcode =
account.14.send_anonymous_rejection_code =
account.14.anonymous_reject_oncode =
account.14.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.14.codec.g722.enable =
account.14.codec.g722.priority =
account.14.codec.g729.enable = account.14.codec.g729.priority =
account.14.codec.g726_16.enable = account.14.codec.g726_16.priority =
account.14.codec.g726_24.enable = account.14.codec.g726_24.priority =
account.14.codec.g726_32.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 131 OF 1142
account.14.codec.g726_32.priority =
account.14.codec.g726_40.enable = account.14.codec.g726_40.priority =
account.14.codec.ilbc.enable = account.14.codec.ilbc.priority =
account.14.codec.pcmu.enable = account.14.codec.pcmu.priority =
account.14.codec.pcma.enable = account.14.codec.pcma.priority =
account.14.codec.opus.enable = account.14.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.14.nat.nat_traversal = account.14.nat.udp_update_enable = account.14.nat.udp_update_time = account.14.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.14.blf.subscribe_period = account.14.dtmf.type = account.14.dtmf.dtmf_payload = account.14.dtmf.info_type = account.14.100rel_enable = account.14.subscribe_register = account.14.subscribe_mwi = account.14.subscribe_mwi_expires = account.14.subscribe_mwi_to_vm = voice_mail.number.14 = %BWVOICE-PORTAL-NUMBER-14% account.14.display_mwi.enable = account.14.cid_source = account.14.cid_source_privacy = account.14.cid_source_ppi = account.14.session_timer.enable = account.14.session_timer.expires = account.14.session_timer.refresher = account.14.enable_user_equal_phone = account.14.srtp_encryption = account.14.ptime = account.14.shared_line = %BWSHAREDLINE-BINARY-14% account.14.register_mac = account.14.register_line = account.14.reg_fail_retry_interval = account.14.reg_failed_retry_min_time = account.14.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 132 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.14.conf_type =
account.14.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-14%
account.14.sip_server_type = account.14.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.14.register_expires_overlap = account.14.subscribe_expires_overlap = account.14.auto_dial_enable = account.14.auto_dial_num = account.14.cp_source = account.14.transfer_refer_to_contact_header.enable = #V80 Add account.14.custom_ua = account.14.callpark_enable = account.14.check_cseq.enable = account.14.check_to_tag.enable = account.14.hold_use_inactive = account.14.line_seize.expires = account.14.update_ack_while_dialing = account.14.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.14.always_fwd.enable =
account.14.always_fwd.target =
account.14.always_fwd.off_code =
account.14.always_fwd.on_code =
account.14.busy_fwd.enable =
account.14.busy_fwd.target =
account.14.busy_fwd.off_code =
account.14.busy_fwd.on_code =
account.14.timeout_fwd.enable =
account.14.timeout_fwd.target =
account.14.timeout_fwd.timeout =
account.14.timeout_fwd.off_code =
account.14.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 133 OF 1142
account.14.dnd.enable = account.14.dnd.on_code = account.14.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.14.reg.enable =
handset.14.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.14.xsi.user =%BWLOGIN-ID-14% account.14.xsi.password =%XSIPASSWORD-14% account.14.xsi.host =%XSP_ADDRESS% account.14.xsi.server_type = account.14.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.14.ldap.enable =
handset.14.ldap.name_filter=
handset.14.ldap.number_filter=
handset.14.ldap.host=
handset.14.ldap.port=
handset.14.ldap.base=
handset.14.ldap.user=
handset.14.ldap.password=
handset.14.ldap.max_hits=
handset.14.ldap.name_attr=
handset.14.ldap.numb_attr=
handset.14.ldap.display_name=
handset.14.ldap.version=
handset.14.ldap.call_in_lookup=
handset.14.ldap.ldap_sort=
handset.14.ldap.tls_mode=
handset.14.ldap.call_out_lookup=
handset.14.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account15 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 134 OF 1142
account.15.enable=%BWLINE-BINARY-15% account.15.label=%BWEXTENSION-15% account.15.display_name=%BWCLID-15% account.15.auth_name=%BWAUTHUSER-15% account.15.user_name=%BWLINEPORT-15% account.15.password=%BWAUTHPASSWORD-15%
#W80B ADD account.15.sip_server.template = account.15.media_transmit.enable =
account.15.alarm.template = account.15.alarm.server = account.15.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.15.sip_server.1.failback_mode =
account.15.sip_server.1.failback_timeout =
account.15.sip_server.1.register_on_enable =
account.15.sip_server.1.failback_subscribe.enable =
account.15.sip_server.1.invite_retry_counts =
account.15.sip_server.1.only_signal_with_registered =
account.15.sip_server.2.failback_mode = account.15.sip_server.2.failback_timeout = account.15.sip_server.2.register_on_enable = account.15.sip_server.2.failback_subscribe.enable = account.15.sip_server.2.invite_retry_counts = account.15.sip_server.2.only_signal_with_registered =
account.15.naptr_build = account.15.fallback.redundancy_type = account.15.fallback.timeout =
account.15.dns_cache_type = account.15.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.15.anonymous_call =
account.15.reject_anonymous_call =
account.15.send_anonymous_code =
account.15.anonymous_call_oncode =
account.15.anonymous_call_offcode =
account.15.send_anonymous_rejection_code =
account.15.anonymous_reject_oncode =
account.15.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 135 OF 1142
########################################################################## ############# account.15.codec.g722.enable = account.15.codec.g722.priority =
account.15.codec.g729.enable = account.15.codec.g729.priority =
account.15.codec.g726_16.enable = account.15.codec.g726_16.priority =
account.15.codec.g726_24.enable = account.15.codec.g726_24.priority =
account.15.codec.g726_32.enable = account.15.codec.g726_32.priority =
account.15.codec.g726_40.enable = account.15.codec.g726_40.priority =
account.15.codec.ilbc.enable = account.15.codec.ilbc.priority =
account.15.codec.pcmu.enable = account.15.codec.pcmu.priority =
account.15.codec.pcma.enable = account.15.codec.pcma.priority =
account.15.codec.opus.enable = account.15.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.15.nat.nat_traversal = account.15.nat.udp_update_enable = account.15.nat.udp_update_time = account.15.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.15.blf.subscribe_period = account.15.dtmf.type = account.15.dtmf.dtmf_payload = account.15.dtmf.info_type = account.15.100rel_enable = account.15.subscribe_register = account.15.subscribe_mwi = account.15.subscribe_mwi_expires = account.15.subscribe_mwi_to_vm = voice_mail.number.15 = %BWVOICE-PORTAL-NUMBER-15% account.15.display_mwi.enable = account.15.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 136 OF 1142
account.15.cid_source_privacy = account.15.cid_source_ppi = account.15.session_timer.enable = account.15.session_timer.expires = account.15.session_timer.refresher = account.15.enable_user_equal_phone = account.15.srtp_encryption = account.15.ptime = account.15.shared_line = %BWSHAREDLINE-BINARY-15% account.15.register_mac = account.15.register_line = account.15.reg_fail_retry_interval = account.15.reg_failed_retry_min_time = account.15.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.15.conf_type =
account.15.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-15%
account.15.sip_server_type = account.15.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.15.register_expires_overlap = account.15.subscribe_expires_overlap = account.15.auto_dial_enable = account.15.auto_dial_num = account.15.cp_source = account.15.transfer_refer_to_contact_header.enable = #V80 Add account.15.custom_ua = account.15.callpark_enable = account.15.check_cseq.enable = account.15.check_to_tag.enable = account.15.hold_use_inactive = account.15.line_seize.expires = account.15.update_ack_while_dialing = account.15.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.15.always_fwd.enable =
account.15.always_fwd.target =
account.15.always_fwd.off_code =
account.15.always_fwd.on_code =
account.15.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 137 OF 1142
account.15.busy_fwd.target = account.15.busy_fwd.off_code = account.15.busy_fwd.on_code = account.15.timeout_fwd.enable = account.15.timeout_fwd.target = account.15.timeout_fwd.timeout = account.15.timeout_fwd.off_code = account.15.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.15.dnd.enable =
account.15.dnd.on_code =
account.15.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.15.reg.enable =
handset.15.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.15.xsi.user =%BWLOGIN-ID-15% account.15.xsi.password =%XSIPASSWORD-15% account.15.xsi.host =%XSP_ADDRESS% account.15.xsi.server_type = account.15.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.15.ldap.enable =
handset.15.ldap.name_filter=
handset.15.ldap.number_filter=
handset.15.ldap.host=
handset.15.ldap.port=
handset.15.ldap.base=
handset.15.ldap.user=
handset.15.ldap.password=
handset.15.ldap.max_hits=
handset.15.ldap.name_attr=
handset.15.ldap.numb_attr=
handset.15.ldap.display_name=
handset.15.ldap.version=
handset.15.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 138 OF 1142
handset.15.ldap.ldap_sort= handset.15.ldap.tls_mode= handset.15.ldap.call_out_lookup= handset.15.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account16 Settings
##
##########################################################################
#############
account.16.enable=%BWLINE-BINARY-16% account.16.label=%BWEXTENSION-16% account.16.display_name=%BWCLID-16% account.16.auth_name=%BWAUTHUSER-16% account.16.user_name=%BWLINEPORT-16% account.16.password=%BWAUTHPASSWORD-16%
#W80B ADD account.16.sip_server.template = account.16.media_transmit.enable =
account.16.alarm.template = account.16.alarm.server = account.16.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.16.sip_server.1.failback_mode =
account.16.sip_server.1.failback_timeout =
account.16.sip_server.1.register_on_enable =
account.16.sip_server.1.failback_subscribe.enable =
account.16.sip_server.1.invite_retry_counts =
account.16.sip_server.1.only_signal_with_registered =
account.16.sip_server.2.failback_mode = account.16.sip_server.2.failback_timeout = account.16.sip_server.2.register_on_enable = account.16.sip_server.2.failback_subscribe.enable = account.16.sip_server.2.invite_retry_counts = account.16.sip_server.2.only_signal_with_registered =
account.16.naptr_build = account.16.fallback.redundancy_type = account.16.fallback.timeout =
account.16.dns_cache_type = account.16.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 139 OF 1142
account.16.anonymous_call = account.16.reject_anonymous_call = account.16.send_anonymous_code = account.16.anonymous_call_oncode = account.16.anonymous_call_offcode = account.16.send_anonymous_rejection_code = account.16.anonymous_reject_oncode = account.16.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.16.codec.g722.enable =
account.16.codec.g722.priority =
account.16.codec.g729.enable = account.16.codec.g729.priority =
account.16.codec.g726_16.enable = account.16.codec.g726_16.priority =
account.16.codec.g726_24.enable = account.16.codec.g726_24.priority =
account.16.codec.g726_32.enable = account.16.codec.g726_32.priority =
account.16.codec.g726_40.enable = account.16.codec.g726_40.priority =
account.16.codec.ilbc.enable = account.16.codec.ilbc.priority =
account.16.codec.pcmu.enable = account.16.codec.pcmu.priority =
account.16.codec.pcma.enable = account.16.codec.pcma.priority =
account.16.codec.opus.enable = account.16.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.16.nat.nat_traversal = account.16.nat.udp_update_enable = account.16.nat.udp_update_time = account.16.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 140 OF 1142
########################################################################## #############
account.16.blf.subscribe_period = account.16.dtmf.type = account.16.dtmf.dtmf_payload = account.16.dtmf.info_type = account.16.100rel_enable = account.16.subscribe_register = account.16.subscribe_mwi = account.16.subscribe_mwi_expires = account.16.subscribe_mwi_to_vm = voice_mail.number.16 = %BWVOICE-PORTAL-NUMBER-16% account.16.display_mwi.enable = account.16.cid_source = account.16.cid_source_privacy = account.16.cid_source_ppi = account.16.session_timer.enable = account.16.session_timer.expires = account.16.session_timer.refresher = account.16.enable_user_equal_phone = account.16.srtp_encryption = account.16.ptime = account.16.shared_line = %BWSHAREDLINE-BINARY-16% account.16.register_mac = account.16.register_line = account.16.reg_fail_retry_interval = account.16.reg_failed_retry_min_time = account.16.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.16.conf_type =
account.16.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-16%
account.16.sip_server_type = account.16.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.16.register_expires_overlap = account.16.subscribe_expires_overlap = account.16.auto_dial_enable = account.16.auto_dial_num = account.16.cp_source = account.16.transfer_refer_to_contact_header.enable = #V80 Add account.16.custom_ua = account.16.callpark_enable = account.16.check_cseq.enable = account.16.check_to_tag.enable = account.16.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 141 OF 1142
account.16.line_seize.expires = account.16.update_ack_while_dialing = account.16.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.16.always_fwd.enable =
account.16.always_fwd.target =
account.16.always_fwd.off_code =
account.16.always_fwd.on_code =
account.16.busy_fwd.enable =
account.16.busy_fwd.target =
account.16.busy_fwd.off_code =
account.16.busy_fwd.on_code =
account.16.timeout_fwd.enable =
account.16.timeout_fwd.target =
account.16.timeout_fwd.timeout =
account.16.timeout_fwd.off_code =
account.16.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.16.dnd.enable =
account.16.dnd.on_code =
account.16.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.16.reg.enable =
handset.16.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.16.xsi.user =%BWLOGIN-ID-16% account.16.xsi.password =%XSIPASSWORD-16% account.16.xsi.host =%XSP_ADDRESS% account.16.xsi.server_type = account.16.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 142 OF 1142
########################################################################## ############# handset.16.ldap.enable = handset.16.ldap.name_filter= handset.16.ldap.number_filter= handset.16.ldap.host= handset.16.ldap.port= handset.16.ldap.base= handset.16.ldap.user= handset.16.ldap.password= handset.16.ldap.max_hits= handset.16.ldap.name_attr= handset.16.ldap.numb_attr= handset.16.ldap.display_name= handset.16.ldap.version= handset.16.ldap.call_in_lookup= handset.16.ldap.ldap_sort= handset.16.ldap.tls_mode= handset.16.ldap.call_out_lookup= handset.16.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account17 Settings
##
##########################################################################
#############
account.17.enable=%BWLINE-BINARY-17% account.17.label=%BWEXTENSION-17% account.17.display_name=%BWCLID-17% account.17.auth_name=%BWAUTHUSER-17% account.17.user_name=%BWLINEPORT-17% account.17.password=%BWAUTHPASSWORD-17%
#W80B ADD account.17.sip_server.template = account.17.media_transmit.enable =
account.17.alarm.template = account.17.alarm.server = account.17.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.17.sip_server.1.failback_mode =
account.17.sip_server.1.failback_timeout =
account.17.sip_server.1.register_on_enable =
account.17.sip_server.1.failback_subscribe.enable =
account.17.sip_server.1.invite_retry_counts =
account.17.sip_server.1.only_signal_with_registered =
account.17.sip_server.2.failback_mode = account.17.sip_server.2.failback_timeout = account.17.sip_server.2.register_on_enable = account.17.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 143 OF 1142
account.17.sip_server.2.invite_retry_counts = account.17.sip_server.2.only_signal_with_registered =
account.17.naptr_build = account.17.fallback.redundancy_type = account.17.fallback.timeout =
account.17.dns_cache_type = account.17.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.17.anonymous_call =
account.17.reject_anonymous_call =
account.17.send_anonymous_code =
account.17.anonymous_call_oncode =
account.17.anonymous_call_offcode =
account.17.send_anonymous_rejection_code =
account.17.anonymous_reject_oncode =
account.17.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.17.codec.g722.enable =
account.17.codec.g722.priority =
account.17.codec.g729.enable = account.17.codec.g729.priority =
account.17.codec.g726_16.enable = account.17.codec.g726_16.priority =
account.17.codec.g726_24.enable = account.17.codec.g726_24.priority =
account.17.codec.g726_32.enable = account.17.codec.g726_32.priority =
account.17.codec.g726_40.enable = account.17.codec.g726_40.priority =
account.17.codec.ilbc.enable = account.17.codec.ilbc.priority =
account.17.codec.pcmu.enable = account.17.codec.pcmu.priority =
account.17.codec.pcma.enable = account.17.codec.pcma.priority =
account.17.codec.opus.enable = account.17.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 144 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.17.nat.nat_traversal = account.17.nat.udp_update_enable = account.17.nat.udp_update_time = account.17.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.17.blf.subscribe_period = account.17.dtmf.type = account.17.dtmf.dtmf_payload = account.17.dtmf.info_type = account.17.100rel_enable = account.17.subscribe_register = account.17.subscribe_mwi = account.17.subscribe_mwi_expires = account.17.subscribe_mwi_to_vm = voice_mail.number.17 = %BWVOICE-PORTAL-NUMBER-17% account.17.display_mwi.enable = account.17.cid_source = account.17.cid_source_privacy = account.17.cid_source_ppi = account.17.session_timer.enable = account.17.session_timer.expires = account.17.session_timer.refresher = account.17.enable_user_equal_phone = account.17.srtp_encryption = account.17.ptime = account.17.shared_line = %BWSHAREDLINE-BINARY-17% account.17.register_mac = account.17.register_line = account.17.reg_fail_retry_interval = account.17.reg_failed_retry_min_time = account.17.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.17.conf_type =
account.17.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-17%
account.17.sip_server_type = account.17.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 145 OF 1142
########################################################################## ############# ##DECT V81 Add
account.17.register_expires_overlap = account.17.subscribe_expires_overlap = account.17.auto_dial_enable = account.17.auto_dial_num = account.17.cp_source = account.17.transfer_refer_to_contact_header.enable = #V80 Add account.17.custom_ua = account.17.callpark_enable = account.17.check_cseq.enable = account.17.check_to_tag.enable = account.17.hold_use_inactive = account.17.line_seize.expires = account.17.update_ack_while_dialing = account.17.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.17.always_fwd.enable =
account.17.always_fwd.target =
account.17.always_fwd.off_code =
account.17.always_fwd.on_code =
account.17.busy_fwd.enable =
account.17.busy_fwd.target =
account.17.busy_fwd.off_code =
account.17.busy_fwd.on_code =
account.17.timeout_fwd.enable =
account.17.timeout_fwd.target =
account.17.timeout_fwd.timeout =
account.17.timeout_fwd.off_code =
account.17.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.17.dnd.enable =
account.17.dnd.on_code =
account.17.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.17.reg.enable =
handset.17.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 146 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.17.xsi.user =%BWLOGIN-ID-17% account.17.xsi.password =%XSIPASSWORD-17% account.17.xsi.host =%XSP_ADDRESS% account.17.xsi.server_type = account.17.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.17.ldap.enable =
handset.17.ldap.name_filter=
handset.17.ldap.number_filter=
handset.17.ldap.host=
handset.17.ldap.port=
handset.17.ldap.base=
handset.17.ldap.user=
handset.17.ldap.password=
handset.17.ldap.max_hits=
handset.17.ldap.name_attr=
handset.17.ldap.numb_attr=
handset.17.ldap.display_name=
handset.17.ldap.version=
handset.17.ldap.call_in_lookup=
handset.17.ldap.ldap_sort=
handset.17.ldap.tls_mode=
handset.17.ldap.call_out_lookup=
handset.17.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account18 Settings
##
##########################################################################
#############
account.18.enable=%BWLINE-BINARY-18% account.18.label=%BWEXTENSION-18% account.18.display_name=%BWCLID-18% account.18.auth_name=%BWAUTHUSER-18% account.18.user_name=%BWLINEPORT-18% account.18.password=%BWAUTHPASSWORD-18%
#W80B ADD account.18.sip_server.template = account.18.media_transmit.enable =
account.18.alarm.template = account.18.alarm.server = account.18.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 147 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.18.sip_server.1.failback_mode =
account.18.sip_server.1.failback_timeout =
account.18.sip_server.1.register_on_enable =
account.18.sip_server.1.failback_subscribe.enable =
account.18.sip_server.1.invite_retry_counts =
account.18.sip_server.1.only_signal_with_registered =
account.18.sip_server.2.failback_mode = account.18.sip_server.2.failback_timeout = account.18.sip_server.2.register_on_enable = account.18.sip_server.2.failback_subscribe.enable = account.18.sip_server.2.invite_retry_counts = account.18.sip_server.2.only_signal_with_registered =
account.18.naptr_build = account.18.fallback.redundancy_type = account.18.fallback.timeout =
account.18.dns_cache_type = account.18.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.18.anonymous_call =
account.18.reject_anonymous_call =
account.18.send_anonymous_code =
account.18.anonymous_call_oncode =
account.18.anonymous_call_offcode =
account.18.send_anonymous_rejection_code =
account.18.anonymous_reject_oncode =
account.18.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.18.codec.g722.enable =
account.18.codec.g722.priority =
account.18.codec.g729.enable = account.18.codec.g729.priority =
account.18.codec.g726_16.enable = account.18.codec.g726_16.priority =
account.18.codec.g726_24.enable = account.18.codec.g726_24.priority =
account.18.codec.g726_32.enable = account.18.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 148 OF 1142
account.18.codec.g726_40.enable = account.18.codec.g726_40.priority =
account.18.codec.ilbc.enable = account.18.codec.ilbc.priority =
account.18.codec.pcmu.enable = account.18.codec.pcmu.priority =
account.18.codec.pcma.enable = account.18.codec.pcma.priority =
account.18.codec.opus.enable = account.18.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.18.nat.nat_traversal = account.18.nat.udp_update_enable = account.18.nat.udp_update_time = account.18.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.18.blf.subscribe_period = account.18.dtmf.type = account.18.dtmf.dtmf_payload = account.18.dtmf.info_type = account.18.100rel_enable = account.18.subscribe_register = account.18.subscribe_mwi = account.18.subscribe_mwi_expires = account.18.subscribe_mwi_to_vm = voice_mail.number.18 = %BWVOICE-PORTAL-NUMBER-18% account.18.display_mwi.enable = account.18.cid_source = account.18.cid_source_privacy = account.18.cid_source_ppi = account.18.session_timer.enable = account.18.session_timer.expires = account.18.session_timer.refresher = account.18.enable_user_equal_phone = account.18.srtp_encryption = account.18.ptime = account.18.shared_line = %BWSHAREDLINE-BINARY-18% account.18.register_mac = account.18.register_line = account.18.reg_fail_retry_interval = account.18.reg_failed_retry_min_time = account.18.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 149 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.18.conf_type =
account.18.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-18%
account.18.sip_server_type = account.18.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.18.register_expires_overlap = account.18.subscribe_expires_overlap = account.18.auto_dial_enable = account.18.auto_dial_num = account.18.cp_source = account.18.transfer_refer_to_contact_header.enable = #V80 Add account.18.custom_ua = account.18.callpark_enable = account.18.check_cseq.enable = account.18.check_to_tag.enable = account.18.hold_use_inactive = account.18.line_seize.expires = account.18.update_ack_while_dialing = account.18.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.18.always_fwd.enable =
account.18.always_fwd.target =
account.18.always_fwd.off_code =
account.18.always_fwd.on_code =
account.18.busy_fwd.enable =
account.18.busy_fwd.target =
account.18.busy_fwd.off_code =
account.18.busy_fwd.on_code =
account.18.timeout_fwd.enable =
account.18.timeout_fwd.target =
account.18.timeout_fwd.timeout =
account.18.timeout_fwd.off_code =
account.18.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 150 OF 1142
account.18.dnd.enable = account.18.dnd.on_code = account.18.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.18.reg.enable =
handset.18.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.18.xsi.user =%BWLOGIN-ID-18% account.18.xsi.password =%XSIPASSWORD-18% account.18.xsi.host =%XSP_ADDRESS% account.18.xsi.server_type = account.18.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.18.ldap.enable =
handset.18.ldap.name_filter=
handset.18.ldap.number_filter=
handset.18.ldap.host=
handset.18.ldap.port=
handset.18.ldap.base=
handset.18.ldap.user=
handset.18.ldap.password=
handset.18.ldap.max_hits=
handset.18.ldap.name_attr=
handset.18.ldap.numb_attr=
handset.18.ldap.display_name=
handset.18.ldap.version=
handset.18.ldap.call_in_lookup=
handset.18.ldap.ldap_sort=
handset.18.ldap.tls_mode=
handset.18.ldap.call_out_lookup=
handset.18.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account19 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 151 OF 1142
account.19.enable=%BWLINE-BINARY-19% account.19.label=%BWEXTENSION-19% account.19.display_name=%BWCLID-19% account.19.auth_name=%BWAUTHUSER-19% account.19.user_name=%BWLINEPORT-19% account.19.password=%BWAUTHPASSWORD-19%
#W80B ADD account.19.sip_server.template = account.19.media_transmit.enable =
account.19.alarm.template = account.19.alarm.server = account.19.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.19.sip_server.1.failback_mode =
account.19.sip_server.1.failback_timeout =
account.19.sip_server.1.register_on_enable =
account.19.sip_server.1.failback_subscribe.enable =
account.19.sip_server.1.invite_retry_counts =
account.19.sip_server.1.only_signal_with_registered =
account.19.sip_server.2.failback_mode = account.19.sip_server.2.failback_timeout = account.19.sip_server.2.register_on_enable = account.19.sip_server.2.failback_subscribe.enable = account.19.sip_server.2.invite_retry_counts = account.19.sip_server.2.only_signal_with_registered =
account.19.naptr_build = account.19.fallback.redundancy_type = account.19.fallback.timeout =
account.19.dns_cache_type = account.19.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.19.anonymous_call =
account.19.reject_anonymous_call =
account.19.send_anonymous_code =
account.19.anonymous_call_oncode =
account.19.anonymous_call_offcode =
account.19.send_anonymous_rejection_code =
account.19.anonymous_reject_oncode =
account.19.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 152 OF 1142
########################################################################## ############# account.19.codec.g722.enable = account.19.codec.g722.priority =
account.19.codec.g729.enable = account.19.codec.g729.priority =
account.19.codec.g726_16.enable = account.19.codec.g726_16.priority =
account.19.codec.g726_24.enable = account.19.codec.g726_24.priority =
account.19.codec.g726_32.enable = account.19.codec.g726_32.priority =
account.19.codec.g726_40.enable = account.19.codec.g726_40.priority =
account.19.codec.ilbc.enable = account.19.codec.ilbc.priority =
account.19.codec.pcmu.enable = account.19.codec.pcmu.priority =
account.19.codec.pcma.enable = account.19.codec.pcma.priority =
account.19.codec.opus.enable = account.19.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.19.nat.nat_traversal = account.19.nat.udp_update_enable = account.19.nat.udp_update_time = account.19.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.19.blf.subscribe_period = account.19.dtmf.type = account.19.dtmf.dtmf_payload = account.19.dtmf.info_type = account.19.100rel_enable = account.19.subscribe_register = account.19.subscribe_mwi = account.19.subscribe_mwi_expires = account.19.subscribe_mwi_to_vm = voice_mail.number.19 = %BWVOICE-PORTAL-NUMBER-19% account.19.display_mwi.enable = account.19.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 153 OF 1142
account.19.cid_source_privacy = account.19.cid_source_ppi = account.19.session_timer.enable = account.19.session_timer.expires = account.19.session_timer.refresher = account.19.enable_user_equal_phone = account.19.srtp_encryption = account.19.ptime = account.19.shared_line = %BWSHAREDLINE-BINARY-19% account.19.register_mac = account.19.register_line = account.19.reg_fail_retry_interval = account.19.reg_failed_retry_min_time = account.19.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.19.conf_type =
account.19.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-19%
account.19.sip_server_type = account.19.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.19.register_expires_overlap = account.19.subscribe_expires_overlap = account.19.auto_dial_enable = account.19.auto_dial_num = account.19.cp_source = account.19.transfer_refer_to_contact_header.enable = #V80 Add account.19.custom_ua = account.19.callpark_enable = account.19.check_cseq.enable = account.19.check_to_tag.enable = account.19.hold_use_inactive = account.19.line_seize.expires = account.19.update_ack_while_dialing = account.19.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.19.always_fwd.enable =
account.19.always_fwd.target =
account.19.always_fwd.off_code =
account.19.always_fwd.on_code =
account.19.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 154 OF 1142
account.19.busy_fwd.target = account.19.busy_fwd.off_code = account.19.busy_fwd.on_code = account.19.timeout_fwd.enable = account.19.timeout_fwd.target = account.19.timeout_fwd.timeout = account.19.timeout_fwd.off_code = account.19.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.19.dnd.enable =
account.19.dnd.on_code =
account.19.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.19.reg.enable =
handset.19.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.19.xsi.user =%BWLOGIN-ID-19% account.19.xsi.password =%XSIPASSWORD-19% account.19.xsi.host =%XSP_ADDRESS% account.19.xsi.server_type = account.19.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.19.ldap.enable =
handset.19.ldap.name_filter=
handset.19.ldap.number_filter=
handset.19.ldap.host=
handset.19.ldap.port=
handset.19.ldap.base=
handset.19.ldap.user=
handset.19.ldap.password=
handset.19.ldap.max_hits=
handset.19.ldap.name_attr=
handset.19.ldap.numb_attr=
handset.19.ldap.display_name=
handset.19.ldap.version=
handset.19.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 155 OF 1142
handset.19.ldap.ldap_sort= handset.19.ldap.tls_mode= handset.19.ldap.call_out_lookup= handset.19.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account20 Settings
##
##########################################################################
#############
account.20.enable=%BWLINE-BINARY-20% account.20.label=%BWEXTENSION-20% account.20.display_name=%BWCLID-20% account.20.auth_name=%BWAUTHUSER-20% account.20.user_name=%BWLINEPORT-20% account.20.password=%BWAUTHPASSWORD-20%
#W80B ADD account.20.sip_server.template = account.20.media_transmit.enable =
account.20.alarm.template = account.20.alarm.server = account.20.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.20.sip_server.1.failback_mode =
account.20.sip_server.1.failback_timeout =
account.20.sip_server.1.register_on_enable =
account.20.sip_server.1.failback_subscribe.enable =
account.20.sip_server.1.invite_retry_counts =
account.20.sip_server.1.only_signal_with_registered =
account.20.sip_server.2.failback_mode = account.20.sip_server.2.failback_timeout = account.20.sip_server.2.register_on_enable = account.20.sip_server.2.failback_subscribe.enable = account.20.sip_server.2.invite_retry_counts = account.20.sip_server.2.only_signal_with_registered =
account.20.naptr_build = account.20.fallback.redundancy_type = account.20.fallback.timeout =
account.20.dns_cache_type = account.20.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 156 OF 1142
account.20.anonymous_call = account.20.reject_anonymous_call = account.20.send_anonymous_code = account.20.anonymous_call_oncode = account.20.anonymous_call_offcode = account.20.send_anonymous_rejection_code = account.20.anonymous_reject_oncode = account.20.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.20.codec.g722.enable =
account.20.codec.g722.priority =
account.20.codec.g729.enable = account.20.codec.g729.priority =
account.20.codec.g726_16.enable = account.20.codec.g726_16.priority =
account.20.codec.g726_24.enable = account.20.codec.g726_24.priority =
account.20.codec.g726_32.enable = account.20.codec.g726_32.priority =
account.20.codec.g726_40.enable = account.20.codec.g726_40.priority =
account.20.codec.ilbc.enable = account.20.codec.ilbc.priority =
account.20.codec.pcmu.enable = account.20.codec.pcmu.priority =
account.20.codec.pcma.enable = account.20.codec.pcma.priority =
account.20.codec.opus.enable = account.20.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.20.nat.nat_traversal = account.20.nat.udp_update_enable = account.20.nat.udp_update_time = account.20.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 157 OF 1142
########################################################################## #############
account.20.blf.subscribe_period = account.20.dtmf.type = account.20.dtmf.dtmf_payload = account.20.dtmf.info_type = account.20.100rel_enable = account.20.subscribe_register = account.20.subscribe_mwi = account.20.subscribe_mwi_expires = account.20.subscribe_mwi_to_vm = voice_mail.number.20 = %BWVOICE-PORTAL-NUMBER-20% account.20.display_mwi.enable = account.20.cid_source = account.20.cid_source_privacy = account.20.cid_source_ppi = account.20.session_timer.enable = account.20.session_timer.expires = account.20.session_timer.refresher = account.20.enable_user_equal_phone = account.20.srtp_encryption = account.20.ptime = account.20.shared_line = %BWSHAREDLINE-BINARY-20% account.20.register_mac = account.20.register_line = account.20.reg_fail_retry_interval = account.20.reg_failed_retry_min_time = account.20.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.20.conf_type =
account.20.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-20%
account.20.sip_server_type = account.20.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.20.register_expires_overlap = account.20.subscribe_expires_overlap = account.20.auto_dial_enable = account.20.auto_dial_num = account.20.cp_source = account.20.transfer_refer_to_contact_header.enable = #V80 Add account.20.custom_ua = account.20.callpark_enable = account.20.check_cseq.enable = account.20.check_to_tag.enable = account.20.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 158 OF 1142
account.20.line_seize.expires = account.20.update_ack_while_dialing = account.20.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.20.always_fwd.enable =
account.20.always_fwd.target =
account.20.always_fwd.off_code =
account.20.always_fwd.on_code =
account.20.busy_fwd.enable =
account.20.busy_fwd.target =
account.20.busy_fwd.off_code =
account.20.busy_fwd.on_code =
account.20.timeout_fwd.enable =
account.20.timeout_fwd.target =
account.20.timeout_fwd.timeout =
account.20.timeout_fwd.off_code =
account.20.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.20.dnd.enable =
account.20.dnd.on_code =
account.20.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.20.reg.enable =
handset.20.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.20.xsi.user =%BWLOGIN-ID-20% account.20.xsi.password =%XSIPASSWORD-20% account.20.xsi.host =%XSP_ADDRESS% account.20.xsi.server_type = account.20.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 159 OF 1142
########################################################################## ############# handset.20.ldap.enable = handset.20.ldap.name_filter= handset.20.ldap.number_filter= handset.20.ldap.host= handset.20.ldap.port= handset.20.ldap.base= handset.20.ldap.user= handset.20.ldap.password= handset.20.ldap.max_hits= handset.20.ldap.name_attr= handset.20.ldap.numb_attr= handset.20.ldap.display_name= handset.20.ldap.version= handset.20.ldap.call_in_lookup= handset.20.ldap.ldap_sort= handset.20.ldap.tls_mode= handset.20.ldap.call_out_lookup= handset.20.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account21 Settings
##
##########################################################################
#############
account.21.enable=%BWLINE-BINARY-21% account.21.label=%BWEXTENSION-21% account.21.display_name=%BWCLID-21% account.21.auth_name=%BWAUTHUSER-21% account.21.user_name=%BWLINEPORT-21% account.21.password=%BWAUTHPASSWORD-21%
#W80B ADD account.21.sip_server.template = account.21.media_transmit.enable =
account.21.alarm.template = account.21.alarm.server = account.21.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.21.sip_server.1.failback_mode =
account.21.sip_server.1.failback_timeout =
account.21.sip_server.1.register_on_enable =
account.21.sip_server.1.failback_subscribe.enable =
account.21.sip_server.1.invite_retry_counts =
account.21.sip_server.1.only_signal_with_registered =
account.21.sip_server.2.failback_mode = account.21.sip_server.2.failback_timeout = account.21.sip_server.2.register_on_enable = account.21.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 160 OF 1142
account.21.sip_server.2.invite_retry_counts = account.21.sip_server.2.only_signal_with_registered =
account.21.naptr_build = account.21.fallback.redundancy_type = account.21.fallback.timeout =
account.21.dns_cache_type = account.21.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.21.anonymous_call =
account.21.reject_anonymous_call =
account.21.send_anonymous_code =
account.21.anonymous_call_oncode =
account.21.anonymous_call_offcode =
account.21.send_anonymous_rejection_code =
account.21.anonymous_reject_oncode =
account.21.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.21.codec.g722.enable =
account.21.codec.g722.priority =
account.21.codec.g729.enable = account.21.codec.g729.priority =
account.21.codec.g726_16.enable = account.21.codec.g726_16.priority =
account.21.codec.g726_24.enable = account.21.codec.g726_24.priority =
account.21.codec.g726_32.enable = account.21.codec.g726_32.priority =
account.21.codec.g726_40.enable = account.21.codec.g726_40.priority =
account.21.codec.ilbc.enable = account.21.codec.ilbc.priority =
account.21.codec.pcmu.enable = account.21.codec.pcmu.priority =
account.21.codec.pcma.enable = account.21.codec.pcma.priority =
account.21.codec.opus.enable = account.21.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 161 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.21.nat.nat_traversal = account.21.nat.udp_update_enable = account.21.nat.udp_update_time = account.21.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.21.blf.subscribe_period = account.21.dtmf.type = account.21.dtmf.dtmf_payload = account.21.dtmf.info_type = account.21.100rel_enable = account.21.subscribe_register = account.21.subscribe_mwi = account.21.subscribe_mwi_expires = account.21.subscribe_mwi_to_vm = voice_mail.number.21 = %BWVOICE-PORTAL-NUMBER-21% account.21.display_mwi.enable = account.21.cid_source = account.21.cid_source_privacy = account.21.cid_source_ppi = account.21.session_timer.enable = account.21.session_timer.expires = account.21.session_timer.refresher = account.21.enable_user_equal_phone = account.21.srtp_encryption = account.21.ptime = account.21.shared_line = %BWSHAREDLINE-BINARY-21% account.21.register_mac = account.21.register_line = account.21.reg_fail_retry_interval = account.21.reg_failed_retry_min_time = account.21.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.21.conf_type =
account.21.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-21%
account.21.sip_server_type = account.21.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 162 OF 1142
########################################################################## ############# ##DECT V81 Add
account.21.register_expires_overlap = account.21.subscribe_expires_overlap = account.21.auto_dial_enable = account.21.auto_dial_num = account.21.cp_source = account.21.transfer_refer_to_contact_header.enable = #V80 Add account.21.custom_ua = account.21.callpark_enable = account.21.check_cseq.enable = account.21.check_to_tag.enable = account.21.hold_use_inactive = account.21.line_seize.expires = account.21.update_ack_while_dialing = account.21.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.21.always_fwd.enable =
account.21.always_fwd.target =
account.21.always_fwd.off_code =
account.21.always_fwd.on_code =
account.21.busy_fwd.enable =
account.21.busy_fwd.target =
account.21.busy_fwd.off_code =
account.21.busy_fwd.on_code =
account.21.timeout_fwd.enable =
account.21.timeout_fwd.target =
account.21.timeout_fwd.timeout =
account.21.timeout_fwd.off_code =
account.21.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.21.dnd.enable =
account.21.dnd.on_code =
account.21.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.21.reg.enable =
handset.21.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 163 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.21.xsi.user =%BWLOGIN-ID-21% account.21.xsi.password =%XSIPASSWORD-21% account.21.xsi.host =%XSP_ADDRESS% account.21.xsi.server_type = account.21.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.21.ldap.enable =
handset.21.ldap.name_filter=
handset.21.ldap.number_filter=
handset.21.ldap.host=
handset.21.ldap.port=
handset.21.ldap.base=
handset.21.ldap.user=
handset.21.ldap.password=
handset.21.ldap.max_hits=
handset.21.ldap.name_attr=
handset.21.ldap.numb_attr=
handset.21.ldap.display_name=
handset.21.ldap.version=
handset.21.ldap.call_in_lookup=
handset.21.ldap.ldap_sort=
handset.21.ldap.tls_mode=
handset.21.ldap.call_out_lookup=
handset.21.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account22 Settings
##
##########################################################################
#############
account.22.enable=%BWLINE-BINARY-22% account.22.label=%BWEXTENSION-22% account.22.display_name=%BWCLID-22% account.22.auth_name=%BWAUTHUSER-22% account.22.user_name=%BWLINEPORT-22% account.22.password=%BWAUTHPASSWORD-22%
#W80B ADD account.22.sip_server.template = account.22.media_transmit.enable =
account.22.alarm.template = account.22.alarm.server = account.22.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 164 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.22.sip_server.1.failback_mode =
account.22.sip_server.1.failback_timeout =
account.22.sip_server.1.register_on_enable =
account.22.sip_server.1.failback_subscribe.enable =
account.22.sip_server.1.invite_retry_counts =
account.22.sip_server.1.only_signal_with_registered =
account.22.sip_server.2.failback_mode = account.22.sip_server.2.failback_timeout = account.22.sip_server.2.register_on_enable = account.22.sip_server.2.failback_subscribe.enable = account.22.sip_server.2.invite_retry_counts = account.22.sip_server.2.only_signal_with_registered =
account.22.naptr_build = account.22.fallback.redundancy_type = account.22.fallback.timeout =
account.22.dns_cache_type = account.22.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.22.anonymous_call =
account.22.reject_anonymous_call =
account.22.send_anonymous_code =
account.22.anonymous_call_oncode =
account.22.anonymous_call_offcode =
account.22.send_anonymous_rejection_code =
account.22.anonymous_reject_oncode =
account.22.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.22.codec.g722.enable =
account.22.codec.g722.priority =
account.22.codec.g729.enable = account.22.codec.g729.priority =
account.22.codec.g726_16.enable = account.22.codec.g726_16.priority =
account.22.codec.g726_24.enable = account.22.codec.g726_24.priority =
account.22.codec.g726_32.enable = account.22.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 165 OF 1142
account.22.codec.g726_40.enable = account.22.codec.g726_40.priority =
account.22.codec.ilbc.enable = account.22.codec.ilbc.priority =
account.22.codec.pcmu.enable = account.22.codec.pcmu.priority =
account.22.codec.pcma.enable = account.22.codec.pcma.priority =
account.22.codec.opus.enable = account.22.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.22.nat.nat_traversal = account.22.nat.udp_update_enable = account.22.nat.udp_update_time = account.22.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.22.blf.subscribe_period = account.22.dtmf.type = account.22.dtmf.dtmf_payload = account.22.dtmf.info_type = account.22.100rel_enable = account.22.subscribe_register = account.22.subscribe_mwi = account.22.subscribe_mwi_expires = account.22.subscribe_mwi_to_vm = voice_mail.number.22 = %BWVOICE-PORTAL-NUMBER-22% account.22.display_mwi.enable = account.22.cid_source = account.22.cid_source_privacy = account.22.cid_source_ppi = account.22.session_timer.enable = account.22.session_timer.expires = account.22.session_timer.refresher = account.22.enable_user_equal_phone = account.22.srtp_encryption = account.22.ptime = account.22.shared_line = %BWSHAREDLINE-BINARY-22% account.22.register_mac = account.22.register_line = account.22.reg_fail_retry_interval = account.22.reg_failed_retry_min_time = account.22.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 166 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.22.conf_type =
account.22.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-22%
account.22.sip_server_type = account.22.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.22.register_expires_overlap = account.22.subscribe_expires_overlap = account.22.auto_dial_enable = account.22.auto_dial_num = account.22.cp_source = account.22.transfer_refer_to_contact_header.enable = #V80 Add account.22.custom_ua = account.22.callpark_enable = account.22.check_cseq.enable = account.22.check_to_tag.enable = account.22.hold_use_inactive = account.22.line_seize.expires = account.22.update_ack_while_dialing = account.22.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.22.always_fwd.enable =
account.22.always_fwd.target =
account.22.always_fwd.off_code =
account.22.always_fwd.on_code =
account.22.busy_fwd.enable =
account.22.busy_fwd.target =
account.22.busy_fwd.off_code =
account.22.busy_fwd.on_code =
account.22.timeout_fwd.enable =
account.22.timeout_fwd.target =
account.22.timeout_fwd.timeout =
account.22.timeout_fwd.off_code =
account.22.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 167 OF 1142
account.22.dnd.enable = account.22.dnd.on_code = account.22.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.22.reg.enable =
handset.22.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.22.xsi.user =%BWLOGIN-ID-22% account.22.xsi.password =%XSIPASSWORD-22% account.22.xsi.host =%XSP_ADDRESS% account.22.xsi.server_type = account.22.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.22.ldap.enable =
handset.22.ldap.name_filter=
handset.22.ldap.number_filter=
handset.22.ldap.host=
handset.22.ldap.port=
handset.22.ldap.base=
handset.22.ldap.user=
handset.22.ldap.password=
handset.22.ldap.max_hits=
handset.22.ldap.name_attr=
handset.22.ldap.numb_attr=
handset.22.ldap.display_name=
handset.22.ldap.version=
handset.22.ldap.call_in_lookup=
handset.22.ldap.ldap_sort=
handset.22.ldap.tls_mode=
handset.22.ldap.call_out_lookup=
handset.22.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account23 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 168 OF 1142
account.23.enable=%BWLINE-BINARY-23% account.23.label=%BWEXTENSION-23% account.23.display_name=%BWCLID-23% account.23.auth_name=%BWAUTHUSER-23% account.23.user_name=%BWLINEPORT-23% account.23.password=%BWAUTHPASSWORD-23%
#W80B ADD account.23.sip_server.template = account.23.media_transmit.enable =
account.23.alarm.template = account.23.alarm.server = account.23.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.23.sip_server.1.failback_mode =
account.23.sip_server.1.failback_timeout =
account.23.sip_server.1.register_on_enable =
account.23.sip_server.1.failback_subscribe.enable =
account.23.sip_server.1.invite_retry_counts =
account.23.sip_server.1.only_signal_with_registered =
account.23.sip_server.2.failback_mode = account.23.sip_server.2.failback_timeout = account.23.sip_server.2.register_on_enable = account.23.sip_server.2.failback_subscribe.enable = account.23.sip_server.2.invite_retry_counts = account.23.sip_server.2.only_signal_with_registered =
account.23.naptr_build = account.23.fallback.redundancy_type = account.23.fallback.timeout =
account.23.dns_cache_type = account.23.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.23.anonymous_call =
account.23.reject_anonymous_call =
account.23.send_anonymous_code =
account.23.anonymous_call_oncode =
account.23.anonymous_call_offcode =
account.23.send_anonymous_rejection_code =
account.23.anonymous_reject_oncode =
account.23.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 169 OF 1142
########################################################################## ############# account.23.codec.g722.enable = account.23.codec.g722.priority =
account.23.codec.g729.enable = account.23.codec.g729.priority =
account.23.codec.g726_16.enable = account.23.codec.g726_16.priority =
account.23.codec.g726_24.enable = account.23.codec.g726_24.priority =
account.23.codec.g726_32.enable = account.23.codec.g726_32.priority =
account.23.codec.g726_40.enable = account.23.codec.g726_40.priority =
account.23.codec.ilbc.enable = account.23.codec.ilbc.priority =
account.23.codec.pcmu.enable = account.23.codec.pcmu.priority =
account.23.codec.pcma.enable = account.23.codec.pcma.priority =
account.23.codec.opus.enable = account.23.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.23.nat.nat_traversal = account.23.nat.udp_update_enable = account.23.nat.udp_update_time = account.23.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.23.blf.subscribe_period = account.23.dtmf.type = account.23.dtmf.dtmf_payload = account.23.dtmf.info_type = account.23.100rel_enable = account.23.subscribe_register = account.23.subscribe_mwi = account.23.subscribe_mwi_expires = account.23.subscribe_mwi_to_vm = voice_mail.number.23 = %BWVOICE-PORTAL-NUMBER-23% account.23.display_mwi.enable = account.23.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 170 OF 1142
account.23.cid_source_privacy = account.23.cid_source_ppi = account.23.session_timer.enable = account.23.session_timer.expires = account.23.session_timer.refresher = account.23.enable_user_equal_phone = account.23.srtp_encryption = account.23.ptime = account.23.shared_line = %BWSHAREDLINE-BINARY-23% account.23.register_mac = account.23.register_line = account.23.reg_fail_retry_interval = account.23.reg_failed_retry_min_time = account.23.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.23.conf_type =
account.23.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-23%
account.23.sip_server_type = account.23.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.23.register_expires_overlap = account.23.subscribe_expires_overlap = account.23.auto_dial_enable = account.23.auto_dial_num = account.23.cp_source = account.23.transfer_refer_to_contact_header.enable = #V80 Add account.23.custom_ua = account.23.callpark_enable = account.23.check_cseq.enable = account.23.check_to_tag.enable = account.23.hold_use_inactive = account.23.line_seize.expires = account.23.update_ack_while_dialing = account.23.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.23.always_fwd.enable =
account.23.always_fwd.target =
account.23.always_fwd.off_code =
account.23.always_fwd.on_code =
account.23.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 171 OF 1142
account.23.busy_fwd.target = account.23.busy_fwd.off_code = account.23.busy_fwd.on_code = account.23.timeout_fwd.enable = account.23.timeout_fwd.target = account.23.timeout_fwd.timeout = account.23.timeout_fwd.off_code = account.23.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.23.dnd.enable =
account.23.dnd.on_code =
account.23.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.23.reg.enable =
handset.23.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.23.xsi.user =%BWLOGIN-ID-23% account.23.xsi.password =%XSIPASSWORD-23% account.23.xsi.host =%XSP_ADDRESS% account.23.xsi.server_type = account.23.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.23.ldap.enable =
handset.23.ldap.name_filter=
handset.23.ldap.number_filter=
handset.23.ldap.host=
handset.23.ldap.port=
handset.23.ldap.base=
handset.23.ldap.user=
handset.23.ldap.password=
handset.23.ldap.max_hits=
handset.23.ldap.name_attr=
handset.23.ldap.numb_attr=
handset.23.ldap.display_name=
handset.23.ldap.version=
handset.23.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 172 OF 1142
handset.23.ldap.ldap_sort= handset.23.ldap.tls_mode= handset.23.ldap.call_out_lookup= handset.23.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account24 Settings
##
##########################################################################
#############
account.24.enable=%BWLINE-BINARY-24% account.24.label=%BWEXTENSION-24% account.24.display_name=%BWCLID-24% account.24.auth_name=%BWAUTHUSER-24% account.24.user_name=%BWLINEPORT-24% account.24.password=%BWAUTHPASSWORD-24%
#W80B ADD account.24.sip_server.template = account.24.media_transmit.enable =
account.24.alarm.template = account.24.alarm.server = account.24.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.24.sip_server.1.failback_mode =
account.24.sip_server.1.failback_timeout =
account.24.sip_server.1.register_on_enable =
account.24.sip_server.1.failback_subscribe.enable =
account.24.sip_server.1.invite_retry_counts =
account.24.sip_server.1.only_signal_with_registered =
account.24.sip_server.2.failback_mode = account.24.sip_server.2.failback_timeout = account.24.sip_server.2.register_on_enable = account.24.sip_server.2.failback_subscribe.enable = account.24.sip_server.2.invite_retry_counts = account.24.sip_server.2.only_signal_with_registered =
account.24.naptr_build = account.24.fallback.redundancy_type = account.24.fallback.timeout =
account.24.dns_cache_type = account.24.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 173 OF 1142
account.24.anonymous_call = account.24.reject_anonymous_call = account.24.send_anonymous_code = account.24.anonymous_call_oncode = account.24.anonymous_call_offcode = account.24.send_anonymous_rejection_code = account.24.anonymous_reject_oncode = account.24.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.24.codec.g722.enable =
account.24.codec.g722.priority =
account.24.codec.g729.enable = account.24.codec.g729.priority =
account.24.codec.g726_16.enable = account.24.codec.g726_16.priority =
account.24.codec.g726_24.enable = account.24.codec.g726_24.priority =
account.24.codec.g726_32.enable = account.24.codec.g726_32.priority =
account.24.codec.g726_40.enable = account.24.codec.g726_40.priority =
account.24.codec.ilbc.enable = account.24.codec.ilbc.priority =
account.24.codec.pcmu.enable = account.24.codec.pcmu.priority =
account.24.codec.pcma.enable = account.24.codec.pcma.priority =
account.24.codec.opus.enable = account.24.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.24.nat.nat_traversal = account.24.nat.udp_update_enable = account.24.nat.udp_update_time = account.24.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 174 OF 1142
########################################################################## #############
account.24.blf.subscribe_period = account.24.dtmf.type = account.24.dtmf.dtmf_payload = account.24.dtmf.info_type = account.24.100rel_enable = account.24.subscribe_register = account.24.subscribe_mwi = account.24.subscribe_mwi_expires = account.24.subscribe_mwi_to_vm = voice_mail.number.24 = %BWVOICE-PORTAL-NUMBER-24% account.24.display_mwi.enable = account.24.cid_source = account.24.cid_source_privacy = account.24.cid_source_ppi = account.24.session_timer.enable = account.24.session_timer.expires = account.24.session_timer.refresher = account.24.enable_user_equal_phone = account.24.srtp_encryption = account.24.ptime = account.24.shared_line = %BWSHAREDLINE-BINARY-24% account.24.register_mac = account.24.register_line = account.24.reg_fail_retry_interval = account.24.reg_failed_retry_min_time = account.24.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.24.conf_type =
account.24.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-24%
account.24.sip_server_type = account.24.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.24.register_expires_overlap = account.24.subscribe_expires_overlap = account.24.auto_dial_enable = account.24.auto_dial_num = account.24.cp_source = account.24.transfer_refer_to_contact_header.enable = #V80 Add account.24.custom_ua = account.24.callpark_enable = account.24.check_cseq.enable = account.24.check_to_tag.enable = account.24.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 175 OF 1142
account.24.line_seize.expires = account.24.update_ack_while_dialing = account.24.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.24.always_fwd.enable =
account.24.always_fwd.target =
account.24.always_fwd.off_code =
account.24.always_fwd.on_code =
account.24.busy_fwd.enable =
account.24.busy_fwd.target =
account.24.busy_fwd.off_code =
account.24.busy_fwd.on_code =
account.24.timeout_fwd.enable =
account.24.timeout_fwd.target =
account.24.timeout_fwd.timeout =
account.24.timeout_fwd.off_code =
account.24.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.24.dnd.enable =
account.24.dnd.on_code =
account.24.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.24.reg.enable =
handset.24.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.24.xsi.user =%BWLOGIN-ID-24% account.24.xsi.password =%XSIPASSWORD-24% account.24.xsi.host =%XSP_ADDRESS% account.24.xsi.server_type = account.24.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 176 OF 1142
########################################################################## ############# handset.24.ldap.enable = handset.24.ldap.name_filter= handset.24.ldap.number_filter= handset.24.ldap.host= handset.24.ldap.port= handset.24.ldap.base= handset.24.ldap.user= handset.24.ldap.password= handset.24.ldap.max_hits= handset.24.ldap.name_attr= handset.24.ldap.numb_attr= handset.24.ldap.display_name= handset.24.ldap.version= handset.24.ldap.call_in_lookup= handset.24.ldap.ldap_sort= handset.24.ldap.tls_mode= handset.24.ldap.call_out_lookup= handset.24.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account25 Settings
##
##########################################################################
#############
account.25.enable=%BWLINE-BINARY-25% account.25.label=%BWEXTENSION-25% account.25.display_name=%BWCLID-25% account.25.auth_name=%BWAUTHUSER-25% account.25.user_name=%BWLINEPORT-25% account.25.password=%BWAUTHPASSWORD-25%
#W80B ADD account.25.sip_server.template = account.25.media_transmit.enable =
account.25.alarm.template = account.25.alarm.server = account.25.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.25.sip_server.1.failback_mode =
account.25.sip_server.1.failback_timeout =
account.25.sip_server.1.register_on_enable =
account.25.sip_server.1.failback_subscribe.enable =
account.25.sip_server.1.invite_retry_counts =
account.25.sip_server.1.only_signal_with_registered =
account.25.sip_server.2.failback_mode = account.25.sip_server.2.failback_timeout = account.25.sip_server.2.register_on_enable = account.25.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 177 OF 1142
account.25.sip_server.2.invite_retry_counts = account.25.sip_server.2.only_signal_with_registered =
account.25.naptr_build = account.25.fallback.redundancy_type = account.25.fallback.timeout =
account.25.dns_cache_type = account.25.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.25.anonymous_call =
account.25.reject_anonymous_call =
account.25.send_anonymous_code =
account.25.anonymous_call_oncode =
account.25.anonymous_call_offcode =
account.25.send_anonymous_rejection_code =
account.25.anonymous_reject_oncode =
account.25.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.25.codec.g722.enable =
account.25.codec.g722.priority =
account.25.codec.g729.enable = account.25.codec.g729.priority =
account.25.codec.g726_16.enable = account.25.codec.g726_16.priority =
account.25.codec.g726_24.enable = account.25.codec.g726_24.priority =
account.25.codec.g726_32.enable = account.25.codec.g726_32.priority =
account.25.codec.g726_40.enable = account.25.codec.g726_40.priority =
account.25.codec.ilbc.enable = account.25.codec.ilbc.priority =
account.25.codec.pcmu.enable = account.25.codec.pcmu.priority =
account.25.codec.pcma.enable = account.25.codec.pcma.priority =
account.25.codec.opus.enable = account.25.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 178 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.25.nat.nat_traversal = account.25.nat.udp_update_enable = account.25.nat.udp_update_time = account.25.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.25.blf.subscribe_period = account.25.dtmf.type = account.25.dtmf.dtmf_payload = account.25.dtmf.info_type = account.25.100rel_enable = account.25.subscribe_register = account.25.subscribe_mwi = account.25.subscribe_mwi_expires = account.25.subscribe_mwi_to_vm = voice_mail.number.25 = %BWVOICE-PORTAL-NUMBER-25% account.25.display_mwi.enable = account.25.cid_source = account.25.cid_source_privacy = account.25.cid_source_ppi = account.25.session_timer.enable = account.25.session_timer.expires = account.25.session_timer.refresher = account.25.enable_user_equal_phone = account.25.srtp_encryption = account.25.ptime = account.25.shared_line = %BWSHAREDLINE-BINARY-25% account.25.register_mac = account.25.register_line = account.25.reg_fail_retry_interval = account.25.reg_failed_retry_min_time = account.25.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.25.conf_type =
account.25.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-25%
account.25.sip_server_type = account.25.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 179 OF 1142
########################################################################## ############# ##DECT V81 Add
account.25.register_expires_overlap = account.25.subscribe_expires_overlap = account.25.auto_dial_enable = account.25.auto_dial_num = account.25.cp_source = account.25.transfer_refer_to_contact_header.enable = #V80 Add account.25.custom_ua = account.25.callpark_enable = account.25.check_cseq.enable = account.25.check_to_tag.enable = account.25.hold_use_inactive = account.25.line_seize.expires = account.25.update_ack_while_dialing = account.25.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.25.always_fwd.enable =
account.25.always_fwd.target =
account.25.always_fwd.off_code =
account.25.always_fwd.on_code =
account.25.busy_fwd.enable =
account.25.busy_fwd.target =
account.25.busy_fwd.off_code =
account.25.busy_fwd.on_code =
account.25.timeout_fwd.enable =
account.25.timeout_fwd.target =
account.25.timeout_fwd.timeout =
account.25.timeout_fwd.off_code =
account.25.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.25.dnd.enable =
account.25.dnd.on_code =
account.25.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.25.reg.enable =
handset.25.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 180 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.25.xsi.user =%BWLOGIN-ID-25% account.25.xsi.password =%XSIPASSWORD-25% account.25.xsi.host =%XSP_ADDRESS% account.25.xsi.server_type = account.25.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.25.ldap.enable =
handset.25.ldap.name_filter=
handset.25.ldap.number_filter=
handset.25.ldap.host=
handset.25.ldap.port=
handset.25.ldap.base=
handset.25.ldap.user=
handset.25.ldap.password=
handset.25.ldap.max_hits=
handset.25.ldap.name_attr=
handset.25.ldap.numb_attr=
handset.25.ldap.display_name=
handset.25.ldap.version=
handset.25.ldap.call_in_lookup=
handset.25.ldap.ldap_sort=
handset.25.ldap.tls_mode=
handset.25.ldap.call_out_lookup=
handset.25.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account26 Settings
##
##########################################################################
#############
account.26.enable=%BWLINE-BINARY-26% account.26.label=%BWEXTENSION-26% account.26.display_name=%BWCLID-26% account.26.auth_name=%BWAUTHUSER-26% account.26.user_name=%BWLINEPORT-26% account.26.password=%BWAUTHPASSWORD-26%
#W80B ADD account.26.sip_server.template = account.26.media_transmit.enable =
account.26.alarm.template = account.26.alarm.server = account.26.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 181 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.26.sip_server.1.failback_mode =
account.26.sip_server.1.failback_timeout =
account.26.sip_server.1.register_on_enable =
account.26.sip_server.1.failback_subscribe.enable =
account.26.sip_server.1.invite_retry_counts =
account.26.sip_server.1.only_signal_with_registered =
account.26.sip_server.2.failback_mode = account.26.sip_server.2.failback_timeout = account.26.sip_server.2.register_on_enable = account.26.sip_server.2.failback_subscribe.enable = account.26.sip_server.2.invite_retry_counts = account.26.sip_server.2.only_signal_with_registered =
account.26.naptr_build = account.26.fallback.redundancy_type = account.26.fallback.timeout =
account.26.dns_cache_type = account.26.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.26.anonymous_call =
account.26.reject_anonymous_call =
account.26.send_anonymous_code =
account.26.anonymous_call_oncode =
account.26.anonymous_call_offcode =
account.26.send_anonymous_rejection_code =
account.26.anonymous_reject_oncode =
account.26.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.26.codec.g722.enable =
account.26.codec.g722.priority =
account.26.codec.g729.enable = account.26.codec.g729.priority =
account.26.codec.g726_16.enable = account.26.codec.g726_16.priority =
account.26.codec.g726_24.enable = account.26.codec.g726_24.priority =
account.26.codec.g726_32.enable = account.26.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 182 OF 1142
account.26.codec.g726_40.enable = account.26.codec.g726_40.priority =
account.26.codec.ilbc.enable = account.26.codec.ilbc.priority =
account.26.codec.pcmu.enable = account.26.codec.pcmu.priority =
account.26.codec.pcma.enable = account.26.codec.pcma.priority =
account.26.codec.opus.enable = account.26.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.26.nat.nat_traversal = account.26.nat.udp_update_enable = account.26.nat.udp_update_time = account.26.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.26.blf.subscribe_period = account.26.dtmf.type = account.26.dtmf.dtmf_payload = account.26.dtmf.info_type = account.26.100rel_enable = account.26.subscribe_register = account.26.subscribe_mwi = account.26.subscribe_mwi_expires = account.26.subscribe_mwi_to_vm = voice_mail.number.26 = %BWVOICE-PORTAL-NUMBER-26% account.26.display_mwi.enable = account.26.cid_source = account.26.cid_source_privacy = account.26.cid_source_ppi = account.26.session_timer.enable = account.26.session_timer.expires = account.26.session_timer.refresher = account.26.enable_user_equal_phone = account.26.srtp_encryption = account.26.ptime = account.26.shared_line = %BWSHAREDLINE-BINARY-26% account.26.register_mac = account.26.register_line = account.26.reg_fail_retry_interval = account.26.reg_failed_retry_min_time = account.26.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 183 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.26.conf_type =
account.26.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-26%
account.26.sip_server_type = account.26.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.26.register_expires_overlap = account.26.subscribe_expires_overlap = account.26.auto_dial_enable = account.26.auto_dial_num = account.26.cp_source = account.26.transfer_refer_to_contact_header.enable = #V80 Add account.26.custom_ua = account.26.callpark_enable = account.26.check_cseq.enable = account.26.check_to_tag.enable = account.26.hold_use_inactive = account.26.line_seize.expires = account.26.update_ack_while_dialing = account.26.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.26.always_fwd.enable =
account.26.always_fwd.target =
account.26.always_fwd.off_code =
account.26.always_fwd.on_code =
account.26.busy_fwd.enable =
account.26.busy_fwd.target =
account.26.busy_fwd.off_code =
account.26.busy_fwd.on_code =
account.26.timeout_fwd.enable =
account.26.timeout_fwd.target =
account.26.timeout_fwd.timeout =
account.26.timeout_fwd.off_code =
account.26.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 184 OF 1142
account.26.dnd.enable = account.26.dnd.on_code = account.26.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.26.reg.enable =
handset.26.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.26.xsi.user =%BWLOGIN-ID-26% account.26.xsi.password =%XSIPASSWORD-26% account.26.xsi.host =%XSP_ADDRESS% account.26.xsi.server_type = account.26.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.26.ldap.enable =
handset.26.ldap.name_filter=
handset.26.ldap.number_filter=
handset.26.ldap.host=
handset.26.ldap.port=
handset.26.ldap.base=
handset.26.ldap.user=
handset.26.ldap.password=
handset.26.ldap.max_hits=
handset.26.ldap.name_attr=
handset.26.ldap.numb_attr=
handset.26.ldap.display_name=
handset.26.ldap.version=
handset.26.ldap.call_in_lookup=
handset.26.ldap.ldap_sort=
handset.26.ldap.tls_mode=
handset.26.ldap.call_out_lookup=
handset.26.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account27 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 185 OF 1142
account.27.enable=%BWLINE-BINARY-27% account.27.label=%BWEXTENSION-27% account.27.display_name=%BWCLID-27% account.27.auth_name=%BWAUTHUSER-27% account.27.user_name=%BWLINEPORT-27% account.27.password=%BWAUTHPASSWORD-27%
#W80B ADD account.27.sip_server.template = account.27.media_transmit.enable =
account.27.alarm.template = account.27.alarm.server = account.27.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.27.sip_server.1.failback_mode =
account.27.sip_server.1.failback_timeout =
account.27.sip_server.1.register_on_enable =
account.27.sip_server.1.failback_subscribe.enable =
account.27.sip_server.1.invite_retry_counts =
account.27.sip_server.1.only_signal_with_registered =
account.27.sip_server.2.failback_mode = account.27.sip_server.2.failback_timeout = account.27.sip_server.2.register_on_enable = account.27.sip_server.2.failback_subscribe.enable = account.27.sip_server.2.invite_retry_counts = account.27.sip_server.2.only_signal_with_registered =
account.27.naptr_build = account.27.fallback.redundancy_type = account.27.fallback.timeout =
account.27.dns_cache_type = account.27.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.27.anonymous_call =
account.27.reject_anonymous_call =
account.27.send_anonymous_code =
account.27.anonymous_call_oncode =
account.27.anonymous_call_offcode =
account.27.send_anonymous_rejection_code =
account.27.anonymous_reject_oncode =
account.27.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 186 OF 1142
########################################################################## ############# account.27.codec.g722.enable = account.27.codec.g722.priority =
account.27.codec.g729.enable = account.27.codec.g729.priority =
account.27.codec.g726_16.enable = account.27.codec.g726_16.priority =
account.27.codec.g726_24.enable = account.27.codec.g726_24.priority =
account.27.codec.g726_32.enable = account.27.codec.g726_32.priority =
account.27.codec.g726_40.enable = account.27.codec.g726_40.priority =
account.27.codec.ilbc.enable = account.27.codec.ilbc.priority =
account.27.codec.pcmu.enable = account.27.codec.pcmu.priority =
account.27.codec.pcma.enable = account.27.codec.pcma.priority =
account.27.codec.opus.enable = account.27.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.27.nat.nat_traversal = account.27.nat.udp_update_enable = account.27.nat.udp_update_time = account.27.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.27.blf.subscribe_period = account.27.dtmf.type = account.27.dtmf.dtmf_payload = account.27.dtmf.info_type = account.27.100rel_enable = account.27.subscribe_register = account.27.subscribe_mwi = account.27.subscribe_mwi_expires = account.27.subscribe_mwi_to_vm = voice_mail.number.27 = %BWVOICE-PORTAL-NUMBER-27% account.27.display_mwi.enable = account.27.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 187 OF 1142
account.27.cid_source_privacy = account.27.cid_source_ppi = account.27.session_timer.enable = account.27.session_timer.expires = account.27.session_timer.refresher = account.27.enable_user_equal_phone = account.27.srtp_encryption = account.27.ptime = account.27.shared_line = %BWSHAREDLINE-BINARY-27% account.27.register_mac = account.27.register_line = account.27.reg_fail_retry_interval = account.27.reg_failed_retry_min_time = account.27.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.27.conf_type =
account.27.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-27%
account.27.sip_server_type = account.27.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.27.register_expires_overlap = account.27.subscribe_expires_overlap = account.27.auto_dial_enable = account.27.auto_dial_num = account.27.cp_source = account.27.transfer_refer_to_contact_header.enable = #V80 Add account.27.custom_ua = account.27.callpark_enable = account.27.check_cseq.enable = account.27.check_to_tag.enable = account.27.hold_use_inactive = account.27.line_seize.expires = account.27.update_ack_while_dialing = account.27.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.27.always_fwd.enable =
account.27.always_fwd.target =
account.27.always_fwd.off_code =
account.27.always_fwd.on_code =
account.27.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 188 OF 1142
account.27.busy_fwd.target = account.27.busy_fwd.off_code = account.27.busy_fwd.on_code = account.27.timeout_fwd.enable = account.27.timeout_fwd.target = account.27.timeout_fwd.timeout = account.27.timeout_fwd.off_code = account.27.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.27.dnd.enable =
account.27.dnd.on_code =
account.27.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.27.reg.enable =
handset.27.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.27.xsi.user =%BWLOGIN-ID-27% account.27.xsi.password =%XSIPASSWORD-27% account.27.xsi.host =%XSP_ADDRESS% account.27.xsi.server_type = account.27.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.27.ldap.enable =
handset.27.ldap.name_filter=
handset.27.ldap.number_filter=
handset.27.ldap.host=
handset.27.ldap.port=
handset.27.ldap.base=
handset.27.ldap.user=
handset.27.ldap.password=
handset.27.ldap.max_hits=
handset.27.ldap.name_attr=
handset.27.ldap.numb_attr=
handset.27.ldap.display_name=
handset.27.ldap.version=
handset.27.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 189 OF 1142
handset.27.ldap.ldap_sort= handset.27.ldap.tls_mode= handset.27.ldap.call_out_lookup= handset.27.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account28 Settings
##
##########################################################################
#############
account.28.enable=%BWLINE-BINARY-28% account.28.label=%BWEXTENSION-28% account.28.display_name=%BWCLID-28% account.28.auth_name=%BWAUTHUSER-28% account.28.user_name=%BWLINEPORT-28% account.28.password=%BWAUTHPASSWORD-28%
#W80B ADD account.28.sip_server.template = account.28.media_transmit.enable =
account.28.alarm.template = account.28.alarm.server = account.28.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.28.sip_server.1.failback_mode =
account.28.sip_server.1.failback_timeout =
account.28.sip_server.1.register_on_enable =
account.28.sip_server.1.failback_subscribe.enable =
account.28.sip_server.1.invite_retry_counts =
account.28.sip_server.1.only_signal_with_registered =
account.28.sip_server.2.failback_mode = account.28.sip_server.2.failback_timeout = account.28.sip_server.2.register_on_enable = account.28.sip_server.2.failback_subscribe.enable = account.28.sip_server.2.invite_retry_counts = account.28.sip_server.2.only_signal_with_registered =
account.28.naptr_build = account.28.fallback.redundancy_type = account.28.fallback.timeout =
account.28.dns_cache_type = account.28.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 190 OF 1142
account.28.anonymous_call = account.28.reject_anonymous_call = account.28.send_anonymous_code = account.28.anonymous_call_oncode = account.28.anonymous_call_offcode = account.28.send_anonymous_rejection_code = account.28.anonymous_reject_oncode = account.28.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.28.codec.g722.enable =
account.28.codec.g722.priority =
account.28.codec.g729.enable = account.28.codec.g729.priority =
account.28.codec.g726_16.enable = account.28.codec.g726_16.priority =
account.28.codec.g726_24.enable = account.28.codec.g726_24.priority =
account.28.codec.g726_32.enable = account.28.codec.g726_32.priority =
account.28.codec.g726_40.enable = account.28.codec.g726_40.priority =
account.28.codec.ilbc.enable = account.28.codec.ilbc.priority =
account.28.codec.pcmu.enable = account.28.codec.pcmu.priority =
account.28.codec.pcma.enable = account.28.codec.pcma.priority =
account.28.codec.opus.enable = account.28.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.28.nat.nat_traversal = account.28.nat.udp_update_enable = account.28.nat.udp_update_time = account.28.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 191 OF 1142
########################################################################## #############
account.28.blf.subscribe_period = account.28.dtmf.type = account.28.dtmf.dtmf_payload = account.28.dtmf.info_type = account.28.100rel_enable = account.28.subscribe_register = account.28.subscribe_mwi = account.28.subscribe_mwi_expires = account.28.subscribe_mwi_to_vm = voice_mail.number.28 = %BWVOICE-PORTAL-NUMBER-28% account.28.display_mwi.enable = account.28.cid_source = account.28.cid_source_privacy = account.28.cid_source_ppi = account.28.session_timer.enable = account.28.session_timer.expires = account.28.session_timer.refresher = account.28.enable_user_equal_phone = account.28.srtp_encryption = account.28.ptime = account.28.shared_line = %BWSHAREDLINE-BINARY-28% account.28.register_mac = account.28.register_line = account.28.reg_fail_retry_interval = account.28.reg_failed_retry_min_time = account.28.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.28.conf_type =
account.28.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-28%
account.28.sip_server_type = account.28.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.28.register_expires_overlap = account.28.subscribe_expires_overlap = account.28.auto_dial_enable = account.28.auto_dial_num = account.28.cp_source = account.28.transfer_refer_to_contact_header.enable = #V80 Add account.28.custom_ua = account.28.callpark_enable = account.28.check_cseq.enable = account.28.check_to_tag.enable = account.28.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 192 OF 1142
account.28.line_seize.expires = account.28.update_ack_while_dialing = account.28.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.28.always_fwd.enable =
account.28.always_fwd.target =
account.28.always_fwd.off_code =
account.28.always_fwd.on_code =
account.28.busy_fwd.enable =
account.28.busy_fwd.target =
account.28.busy_fwd.off_code =
account.28.busy_fwd.on_code =
account.28.timeout_fwd.enable =
account.28.timeout_fwd.target =
account.28.timeout_fwd.timeout =
account.28.timeout_fwd.off_code =
account.28.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.28.dnd.enable =
account.28.dnd.on_code =
account.28.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.28.reg.enable =
handset.28.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.28.xsi.user =%BWLOGIN-ID-28% account.28.xsi.password =%XSIPASSWORD-28% account.28.xsi.host =%XSP_ADDRESS% account.28.xsi.server_type = account.28.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 193 OF 1142
########################################################################## ############# handset.28.ldap.enable = handset.28.ldap.name_filter= handset.28.ldap.number_filter= handset.28.ldap.host= handset.28.ldap.port= handset.28.ldap.base= handset.28.ldap.user= handset.28.ldap.password= handset.28.ldap.max_hits= handset.28.ldap.name_attr= handset.28.ldap.numb_attr= handset.28.ldap.display_name= handset.28.ldap.version= handset.28.ldap.call_in_lookup= handset.28.ldap.ldap_sort= handset.28.ldap.tls_mode= handset.28.ldap.call_out_lookup= handset.28.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account29 Settings
##
##########################################################################
#############
account.29.enable=%BWLINE-BINARY-29% account.29.label=%BWEXTENSION-29% account.29.display_name=%BWCLID-29% account.29.auth_name=%BWAUTHUSER-29% account.29.user_name=%BWLINEPORT-29% account.29.password=%BWAUTHPASSWORD-29%
#W80B ADD account.29.sip_server.template = account.29.media_transmit.enable =
account.29.alarm.template = account.29.alarm.server = account.29.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.29.sip_server.1.failback_mode =
account.29.sip_server.1.failback_timeout =
account.29.sip_server.1.register_on_enable =
account.29.sip_server.1.failback_subscribe.enable =
account.29.sip_server.1.invite_retry_counts =
account.29.sip_server.1.only_signal_with_registered =
account.29.sip_server.2.failback_mode = account.29.sip_server.2.failback_timeout = account.29.sip_server.2.register_on_enable = account.29.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 194 OF 1142
account.29.sip_server.2.invite_retry_counts = account.29.sip_server.2.only_signal_with_registered =
account.29.naptr_build = account.29.fallback.redundancy_type = account.29.fallback.timeout =
account.29.dns_cache_type = account.29.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.29.anonymous_call =
account.29.reject_anonymous_call =
account.29.send_anonymous_code =
account.29.anonymous_call_oncode =
account.29.anonymous_call_offcode =
account.29.send_anonymous_rejection_code =
account.29.anonymous_reject_oncode =
account.29.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.29.codec.g722.enable =
account.29.codec.g722.priority =
account.29.codec.g729.enable = account.29.codec.g729.priority =
account.29.codec.g726_16.enable = account.29.codec.g726_16.priority =
account.29.codec.g726_24.enable = account.29.codec.g726_24.priority =
account.29.codec.g726_32.enable = account.29.codec.g726_32.priority =
account.29.codec.g726_40.enable = account.29.codec.g726_40.priority =
account.29.codec.ilbc.enable = account.29.codec.ilbc.priority =
account.29.codec.pcmu.enable = account.29.codec.pcmu.priority =
account.29.codec.pcma.enable = account.29.codec.pcma.priority =
account.29.codec.opus.enable = account.29.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 195 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.29.nat.nat_traversal = account.29.nat.udp_update_enable = account.29.nat.udp_update_time = account.29.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.29.blf.subscribe_period = account.29.dtmf.type = account.29.dtmf.dtmf_payload = account.29.dtmf.info_type = account.29.100rel_enable = account.29.subscribe_register = account.29.subscribe_mwi = account.29.subscribe_mwi_expires = account.29.subscribe_mwi_to_vm = voice_mail.number.29 = %BWVOICE-PORTAL-NUMBER-29% account.29.display_mwi.enable = account.29.cid_source = account.29.cid_source_privacy = account.29.cid_source_ppi = account.29.session_timer.enable = account.29.session_timer.expires = account.29.session_timer.refresher = account.29.enable_user_equal_phone = account.29.srtp_encryption = account.29.ptime = account.29.shared_line = %BWSHAREDLINE-BINARY-29% account.29.register_mac = account.29.register_line = account.29.reg_fail_retry_interval = account.29.reg_failed_retry_min_time = account.29.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.29.conf_type =
account.29.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-29%
account.29.sip_server_type = account.29.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 196 OF 1142
########################################################################## ############# ##DECT V81 Add
account.29.register_expires_overlap = account.29.subscribe_expires_overlap = account.29.auto_dial_enable = account.29.auto_dial_num = account.29.cp_source = account.29.transfer_refer_to_contact_header.enable = #V80 Add account.29.custom_ua = account.29.callpark_enable = account.29.check_cseq.enable = account.29.check_to_tag.enable = account.29.hold_use_inactive = account.29.line_seize.expires = account.29.update_ack_while_dialing = account.29.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.29.always_fwd.enable =
account.29.always_fwd.target =
account.29.always_fwd.off_code =
account.29.always_fwd.on_code =
account.29.busy_fwd.enable =
account.29.busy_fwd.target =
account.29.busy_fwd.off_code =
account.29.busy_fwd.on_code =
account.29.timeout_fwd.enable =
account.29.timeout_fwd.target =
account.29.timeout_fwd.timeout =
account.29.timeout_fwd.off_code =
account.29.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.29.dnd.enable =
account.29.dnd.on_code =
account.29.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.29.reg.enable =
handset.29.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 197 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.29.xsi.user =%BWLOGIN-ID-29% account.29.xsi.password =%XSIPASSWORD-29% account.29.xsi.host =%XSP_ADDRESS% account.29.xsi.server_type = account.29.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.29.ldap.enable =
handset.29.ldap.name_filter=
handset.29.ldap.number_filter=
handset.29.ldap.host=
handset.29.ldap.port=
handset.29.ldap.base=
handset.29.ldap.user=
handset.29.ldap.password=
handset.29.ldap.max_hits=
handset.29.ldap.name_attr=
handset.29.ldap.numb_attr=
handset.29.ldap.display_name=
handset.29.ldap.version=
handset.29.ldap.call_in_lookup=
handset.29.ldap.ldap_sort=
handset.29.ldap.tls_mode=
handset.29.ldap.call_out_lookup=
handset.29.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account30 Settings
##
##########################################################################
#############
account.30.enable=%BWLINE-BINARY-30% account.30.label=%BWEXTENSION-30% account.30.display_name=%BWCLID-30% account.30.auth_name=%BWAUTHUSER-30% account.30.user_name=%BWLINEPORT-30% account.30.password=%BWAUTHPASSWORD-30%
#W80B ADD account.30.sip_server.template = account.30.media_transmit.enable =
account.30.alarm.template = account.30.alarm.server = account.30.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 198 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.30.sip_server.1.failback_mode =
account.30.sip_server.1.failback_timeout =
account.30.sip_server.1.register_on_enable =
account.30.sip_server.1.failback_subscribe.enable =
account.30.sip_server.1.invite_retry_counts =
account.30.sip_server.1.only_signal_with_registered =
account.30.sip_server.2.failback_mode = account.30.sip_server.2.failback_timeout = account.30.sip_server.2.register_on_enable = account.30.sip_server.2.failback_subscribe.enable = account.30.sip_server.2.invite_retry_counts = account.30.sip_server.2.only_signal_with_registered =
account.30.naptr_build = account.30.fallback.redundancy_type = account.30.fallback.timeout =
account.30.dns_cache_type = account.30.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.30.anonymous_call =
account.30.reject_anonymous_call =
account.30.send_anonymous_code =
account.30.anonymous_call_oncode =
account.30.anonymous_call_offcode =
account.30.send_anonymous_rejection_code =
account.30.anonymous_reject_oncode =
account.30.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.30.codec.g722.enable =
account.30.codec.g722.priority =
account.30.codec.g729.enable = account.30.codec.g729.priority =
account.30.codec.g726_16.enable = account.30.codec.g726_16.priority =
account.30.codec.g726_24.enable = account.30.codec.g726_24.priority =
account.30.codec.g726_32.enable = account.30.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 199 OF 1142
account.30.codec.g726_40.enable = account.30.codec.g726_40.priority =
account.30.codec.ilbc.enable = account.30.codec.ilbc.priority =
account.30.codec.pcmu.enable = account.30.codec.pcmu.priority =
account.30.codec.pcma.enable = account.30.codec.pcma.priority =
account.30.codec.opus.enable = account.30.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.30.nat.nat_traversal = account.30.nat.udp_update_enable = account.30.nat.udp_update_time = account.30.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.30.blf.subscribe_period = account.30.dtmf.type = account.30.dtmf.dtmf_payload = account.30.dtmf.info_type = account.30.100rel_enable = account.30.subscribe_register = account.30.subscribe_mwi = account.30.subscribe_mwi_expires = account.30.subscribe_mwi_to_vm = voice_mail.number.30 = %BWVOICE-PORTAL-NUMBER-30% account.30.display_mwi.enable = account.30.cid_source = account.30.cid_source_privacy = account.30.cid_source_ppi = account.30.session_timer.enable = account.30.session_timer.expires = account.30.session_timer.refresher = account.30.enable_user_equal_phone = account.30.srtp_encryption = account.30.ptime = account.30.shared_line = %BWSHAREDLINE-BINARY-30% account.30.register_mac = account.30.register_line = account.30.reg_fail_retry_interval = account.30.reg_failed_retry_min_time = account.30.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 200 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.30.conf_type =
account.30.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-30%
account.30.sip_server_type = account.30.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.30.register_expires_overlap = account.30.subscribe_expires_overlap = account.30.auto_dial_enable = account.30.auto_dial_num = account.30.cp_source = account.30.transfer_refer_to_contact_header.enable = #V80 Add account.30.custom_ua = account.30.callpark_enable = account.30.check_cseq.enable = account.30.check_to_tag.enable = account.30.hold_use_inactive = account.30.line_seize.expires = account.30.update_ack_while_dialing = account.30.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.30.always_fwd.enable =
account.30.always_fwd.target =
account.30.always_fwd.off_code =
account.30.always_fwd.on_code =
account.30.busy_fwd.enable =
account.30.busy_fwd.target =
account.30.busy_fwd.off_code =
account.30.busy_fwd.on_code =
account.30.timeout_fwd.enable =
account.30.timeout_fwd.target =
account.30.timeout_fwd.timeout =
account.30.timeout_fwd.off_code =
account.30.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 201 OF 1142
account.30.dnd.enable = account.30.dnd.on_code = account.30.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.30.reg.enable =
handset.30.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.30.xsi.user =%BWLOGIN-ID-30% account.30.xsi.password =%XSIPASSWORD-30% account.30.xsi.host =%XSP_ADDRESS% account.30.xsi.server_type = account.30.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.30.ldap.enable =
handset.30.ldap.name_filter=
handset.30.ldap.number_filter=
handset.30.ldap.host=
handset.30.ldap.port=
handset.30.ldap.base=
handset.30.ldap.user=
handset.30.ldap.password=
handset.30.ldap.max_hits=
handset.30.ldap.name_attr=
handset.30.ldap.numb_attr=
handset.30.ldap.display_name=
handset.30.ldap.version=
handset.30.ldap.call_in_lookup=
handset.30.ldap.ldap_sort=
handset.30.ldap.tls_mode=
handset.30.ldap.call_out_lookup=
handset.30.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account31 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 202 OF 1142
account.31.enable=%BWLINE-BINARY-31% account.31.label=%BWEXTENSION-31% account.31.display_name=%BWCLID-31% account.31.auth_name=%BWAUTHUSER-31% account.31.user_name=%BWLINEPORT-31% account.31.password=%BWAUTHPASSWORD-31%
#W80B ADD account.31.sip_server.template = account.31.media_transmit.enable =
account.31.alarm.template = account.31.alarm.server = account.31.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.31.sip_server.1.failback_mode =
account.31.sip_server.1.failback_timeout =
account.31.sip_server.1.register_on_enable =
account.31.sip_server.1.failback_subscribe.enable =
account.31.sip_server.1.invite_retry_counts =
account.31.sip_server.1.only_signal_with_registered =
account.31.sip_server.2.failback_mode = account.31.sip_server.2.failback_timeout = account.31.sip_server.2.register_on_enable = account.31.sip_server.2.failback_subscribe.enable = account.31.sip_server.2.invite_retry_counts = account.31.sip_server.2.only_signal_with_registered =
account.31.naptr_build = account.31.fallback.redundancy_type = account.31.fallback.timeout =
account.31.dns_cache_type = account.31.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.31.anonymous_call =
account.31.reject_anonymous_call =
account.31.send_anonymous_code =
account.31.anonymous_call_oncode =
account.31.anonymous_call_offcode =
account.31.send_anonymous_rejection_code =
account.31.anonymous_reject_oncode =
account.31.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 203 OF 1142
########################################################################## ############# account.31.codec.g722.enable = account.31.codec.g722.priority =
account.31.codec.g729.enable = account.31.codec.g729.priority =
account.31.codec.g726_16.enable = account.31.codec.g726_16.priority =
account.31.codec.g726_24.enable = account.31.codec.g726_24.priority =
account.31.codec.g726_32.enable = account.31.codec.g726_32.priority =
account.31.codec.g726_40.enable = account.31.codec.g726_40.priority =
account.31.codec.ilbc.enable = account.31.codec.ilbc.priority =
account.31.codec.pcmu.enable = account.31.codec.pcmu.priority =
account.31.codec.pcma.enable = account.31.codec.pcma.priority =
account.31.codec.opus.enable = account.31.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.31.nat.nat_traversal = account.31.nat.udp_update_enable = account.31.nat.udp_update_time = account.31.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.31.blf.subscribe_period = account.31.dtmf.type = account.31.dtmf.dtmf_payload = account.31.dtmf.info_type = account.31.100rel_enable = account.31.subscribe_register = account.31.subscribe_mwi = account.31.subscribe_mwi_expires = account.31.subscribe_mwi_to_vm = voice_mail.number.31 = %BWVOICE-PORTAL-NUMBER-31% account.31.display_mwi.enable = account.31.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 204 OF 1142
account.31.cid_source_privacy = account.31.cid_source_ppi = account.31.session_timer.enable = account.31.session_timer.expires = account.31.session_timer.refresher = account.31.enable_user_equal_phone = account.31.srtp_encryption = account.31.ptime = account.31.shared_line = %BWSHAREDLINE-BINARY-31% account.31.register_mac = account.31.register_line = account.31.reg_fail_retry_interval = account.31.reg_failed_retry_min_time = account.31.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.31.conf_type =
account.31.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-31%
account.31.sip_server_type = account.31.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.31.register_expires_overlap = account.31.subscribe_expires_overlap = account.31.auto_dial_enable = account.31.auto_dial_num = account.31.cp_source = account.31.transfer_refer_to_contact_header.enable = #V80 Add account.31.custom_ua = account.31.callpark_enable = account.31.check_cseq.enable = account.31.check_to_tag.enable = account.31.hold_use_inactive = account.31.line_seize.expires = account.31.update_ack_while_dialing = account.31.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.31.always_fwd.enable =
account.31.always_fwd.target =
account.31.always_fwd.off_code =
account.31.always_fwd.on_code =
account.31.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 205 OF 1142
account.31.busy_fwd.target = account.31.busy_fwd.off_code = account.31.busy_fwd.on_code = account.31.timeout_fwd.enable = account.31.timeout_fwd.target = account.31.timeout_fwd.timeout = account.31.timeout_fwd.off_code = account.31.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.31.dnd.enable =
account.31.dnd.on_code =
account.31.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.31.reg.enable =
handset.31.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.31.xsi.user =%BWLOGIN-ID-31% account.31.xsi.password =%XSIPASSWORD-31% account.31.xsi.host =%XSP_ADDRESS% account.31.xsi.server_type = account.31.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.31.ldap.enable =
handset.31.ldap.name_filter=
handset.31.ldap.number_filter=
handset.31.ldap.host=
handset.31.ldap.port=
handset.31.ldap.base=
handset.31.ldap.user=
handset.31.ldap.password=
handset.31.ldap.max_hits=
handset.31.ldap.name_attr=
handset.31.ldap.numb_attr=
handset.31.ldap.display_name=
handset.31.ldap.version=
handset.31.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 206 OF 1142
handset.31.ldap.ldap_sort= handset.31.ldap.tls_mode= handset.31.ldap.call_out_lookup= handset.31.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account32 Settings
##
##########################################################################
#############
account.32.enable=%BWLINE-BINARY-32% account.32.label=%BWEXTENSION-32% account.32.display_name=%BWCLID-32% account.32.auth_name=%BWAUTHUSER-32% account.32.user_name=%BWLINEPORT-32% account.32.password=%BWAUTHPASSWORD-32%
#W80B ADD account.32.sip_server.template = account.32.media_transmit.enable =
account.32.alarm.template = account.32.alarm.server = account.32.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.32.sip_server.1.failback_mode =
account.32.sip_server.1.failback_timeout =
account.32.sip_server.1.register_on_enable =
account.32.sip_server.1.failback_subscribe.enable =
account.32.sip_server.1.invite_retry_counts =
account.32.sip_server.1.only_signal_with_registered =
account.32.sip_server.2.failback_mode = account.32.sip_server.2.failback_timeout = account.32.sip_server.2.register_on_enable = account.32.sip_server.2.failback_subscribe.enable = account.32.sip_server.2.invite_retry_counts = account.32.sip_server.2.only_signal_with_registered =
account.32.naptr_build = account.32.fallback.redundancy_type = account.32.fallback.timeout =
account.32.dns_cache_type = account.32.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 207 OF 1142
account.32.anonymous_call = account.32.reject_anonymous_call = account.32.send_anonymous_code = account.32.anonymous_call_oncode = account.32.anonymous_call_offcode = account.32.send_anonymous_rejection_code = account.32.anonymous_reject_oncode = account.32.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.32.codec.g722.enable =
account.32.codec.g722.priority =
account.32.codec.g729.enable = account.32.codec.g729.priority =
account.32.codec.g726_16.enable = account.32.codec.g726_16.priority =
account.32.codec.g726_24.enable = account.32.codec.g726_24.priority =
account.32.codec.g726_32.enable = account.32.codec.g726_32.priority =
account.32.codec.g726_40.enable = account.32.codec.g726_40.priority =
account.32.codec.ilbc.enable = account.32.codec.ilbc.priority =
account.32.codec.pcmu.enable = account.32.codec.pcmu.priority =
account.32.codec.pcma.enable = account.32.codec.pcma.priority =
account.32.codec.opus.enable = account.32.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.32.nat.nat_traversal = account.32.nat.udp_update_enable = account.32.nat.udp_update_time = account.32.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 208 OF 1142
########################################################################## #############
account.32.blf.subscribe_period = account.32.dtmf.type = account.32.dtmf.dtmf_payload = account.32.dtmf.info_type = account.32.100rel_enable = account.32.subscribe_register = account.32.subscribe_mwi = account.32.subscribe_mwi_expires = account.32.subscribe_mwi_to_vm = voice_mail.number.32 = %BWVOICE-PORTAL-NUMBER-32% account.32.display_mwi.enable = account.32.cid_source = account.32.cid_source_privacy = account.32.cid_source_ppi = account.32.session_timer.enable = account.32.session_timer.expires = account.32.session_timer.refresher = account.32.enable_user_equal_phone = account.32.srtp_encryption = account.32.ptime = account.32.shared_line = %BWSHAREDLINE-BINARY-32% account.32.register_mac = account.32.register_line = account.32.reg_fail_retry_interval = account.32.reg_failed_retry_min_time = account.32.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.32.conf_type =
account.32.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-32%
account.32.sip_server_type = account.32.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.32.register_expires_overlap = account.32.subscribe_expires_overlap = account.32.auto_dial_enable = account.32.auto_dial_num = account.32.cp_source = account.32.transfer_refer_to_contact_header.enable = #V80 Add account.32.custom_ua = account.32.callpark_enable = account.32.check_cseq.enable = account.32.check_to_tag.enable = account.32.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 209 OF 1142
account.32.line_seize.expires = account.32.update_ack_while_dialing = account.32.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.32.always_fwd.enable =
account.32.always_fwd.target =
account.32.always_fwd.off_code =
account.32.always_fwd.on_code =
account.32.busy_fwd.enable =
account.32.busy_fwd.target =
account.32.busy_fwd.off_code =
account.32.busy_fwd.on_code =
account.32.timeout_fwd.enable =
account.32.timeout_fwd.target =
account.32.timeout_fwd.timeout =
account.32.timeout_fwd.off_code =
account.32.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.32.dnd.enable =
account.32.dnd.on_code =
account.32.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.32.reg.enable =
handset.32.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.32.xsi.user =%BWLOGIN-ID-32% account.32.xsi.password =%XSIPASSWORD-32% account.32.xsi.host =%XSP_ADDRESS% account.32.xsi.server_type = account.32.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 210 OF 1142
########################################################################## ############# handset.32.ldap.enable = handset.32.ldap.name_filter= handset.32.ldap.number_filter= handset.32.ldap.host= handset.32.ldap.port= handset.32.ldap.base= handset.32.ldap.user= handset.32.ldap.password= handset.32.ldap.max_hits= handset.32.ldap.name_attr= handset.32.ldap.numb_attr= handset.32.ldap.display_name= handset.32.ldap.version= handset.32.ldap.call_in_lookup= handset.32.ldap.ldap_sort= handset.32.ldap.tls_mode= handset.32.ldap.call_out_lookup= handset.32.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account33 Settings
##
##########################################################################
#############
account.33.enable=%BWLINE-BINARY-33% account.33.label=%BWEXTENSION-33% account.33.display_name=%BWCLID-33% account.33.auth_name=%BWAUTHUSER-33% account.33.user_name=%BWLINEPORT-33% account.33.password=%BWAUTHPASSWORD-33%
#W80B ADD account.33.sip_server.template = account.33.media_transmit.enable =
account.33.alarm.template = account.33.alarm.server = account.33.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.33.sip_server.1.failback_mode =
account.33.sip_server.1.failback_timeout =
account.33.sip_server.1.register_on_enable =
account.33.sip_server.1.failback_subscribe.enable =
account.33.sip_server.1.invite_retry_counts =
account.33.sip_server.1.only_signal_with_registered =
account.33.sip_server.2.failback_mode = account.33.sip_server.2.failback_timeout = account.33.sip_server.2.register_on_enable = account.33.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 211 OF 1142
account.33.sip_server.2.invite_retry_counts = account.33.sip_server.2.only_signal_with_registered =
account.33.naptr_build = account.33.fallback.redundancy_type = account.33.fallback.timeout =
account.33.dns_cache_type = account.33.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.33.anonymous_call =
account.33.reject_anonymous_call =
account.33.send_anonymous_code =
account.33.anonymous_call_oncode =
account.33.anonymous_call_offcode =
account.33.send_anonymous_rejection_code =
account.33.anonymous_reject_oncode =
account.33.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.33.codec.g722.enable =
account.33.codec.g722.priority =
account.33.codec.g729.enable = account.33.codec.g729.priority =
account.33.codec.g726_16.enable = account.33.codec.g726_16.priority =
account.33.codec.g726_24.enable = account.33.codec.g726_24.priority =
account.33.codec.g726_32.enable = account.33.codec.g726_32.priority =
account.33.codec.g726_40.enable = account.33.codec.g726_40.priority =
account.33.codec.ilbc.enable = account.33.codec.ilbc.priority =
account.33.codec.pcmu.enable = account.33.codec.pcmu.priority =
account.33.codec.pcma.enable = account.33.codec.pcma.priority =
account.33.codec.opus.enable = account.33.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 212 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.33.nat.nat_traversal = account.33.nat.udp_update_enable = account.33.nat.udp_update_time = account.33.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.33.blf.subscribe_period = account.33.dtmf.type = account.33.dtmf.dtmf_payload = account.33.dtmf.info_type = account.33.100rel_enable = account.33.subscribe_register = account.33.subscribe_mwi = account.33.subscribe_mwi_expires = account.33.subscribe_mwi_to_vm = voice_mail.number.33 = %BWVOICE-PORTAL-NUMBER-33% account.33.display_mwi.enable = account.33.cid_source = account.33.cid_source_privacy = account.33.cid_source_ppi = account.33.session_timer.enable = account.33.session_timer.expires = account.33.session_timer.refresher = account.33.enable_user_equal_phone = account.33.srtp_encryption = account.33.ptime = account.33.shared_line = %BWSHAREDLINE-BINARY-33% account.33.register_mac = account.33.register_line = account.33.reg_fail_retry_interval = account.33.reg_failed_retry_min_time = account.33.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.33.conf_type =
account.33.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-33%
account.33.sip_server_type = account.33.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 213 OF 1142
########################################################################## ############# ##DECT V81 Add
account.33.register_expires_overlap = account.33.subscribe_expires_overlap = account.33.auto_dial_enable = account.33.auto_dial_num = account.33.cp_source = account.33.transfer_refer_to_contact_header.enable = #V80 Add account.33.custom_ua = account.33.callpark_enable = account.33.check_cseq.enable = account.33.check_to_tag.enable = account.33.hold_use_inactive = account.33.line_seize.expires = account.33.update_ack_while_dialing = account.33.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.33.always_fwd.enable =
account.33.always_fwd.target =
account.33.always_fwd.off_code =
account.33.always_fwd.on_code =
account.33.busy_fwd.enable =
account.33.busy_fwd.target =
account.33.busy_fwd.off_code =
account.33.busy_fwd.on_code =
account.33.timeout_fwd.enable =
account.33.timeout_fwd.target =
account.33.timeout_fwd.timeout =
account.33.timeout_fwd.off_code =
account.33.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.33.dnd.enable =
account.33.dnd.on_code =
account.33.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.33.reg.enable =
handset.33.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 214 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.33.xsi.user =%BWLOGIN-ID-33% account.33.xsi.password =%XSIPASSWORD-33% account.33.xsi.host =%XSP_ADDRESS% account.33.xsi.server_type = account.33.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.33.ldap.enable =
handset.33.ldap.name_filter=
handset.33.ldap.number_filter=
handset.33.ldap.host=
handset.33.ldap.port=
handset.33.ldap.base=
handset.33.ldap.user=
handset.33.ldap.password=
handset.33.ldap.max_hits=
handset.33.ldap.name_attr=
handset.33.ldap.numb_attr=
handset.33.ldap.display_name=
handset.33.ldap.version=
handset.33.ldap.call_in_lookup=
handset.33.ldap.ldap_sort=
handset.33.ldap.tls_mode=
handset.33.ldap.call_out_lookup=
handset.33.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account34 Settings
##
##########################################################################
#############
account.34.enable=%BWLINE-BINARY-34% account.34.label=%BWEXTENSION-34% account.34.display_name=%BWCLID-34% account.34.auth_name=%BWAUTHUSER-34% account.34.user_name=%BWLINEPORT-34% account.34.password=%BWAUTHPASSWORD-34%
#W80B ADD account.34.sip_server.template = account.34.media_transmit.enable =
account.34.alarm.template = account.34.alarm.server = account.34.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 215 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.34.sip_server.1.failback_mode =
account.34.sip_server.1.failback_timeout =
account.34.sip_server.1.register_on_enable =
account.34.sip_server.1.failback_subscribe.enable =
account.34.sip_server.1.invite_retry_counts =
account.34.sip_server.1.only_signal_with_registered =
account.34.sip_server.2.failback_mode = account.34.sip_server.2.failback_timeout = account.34.sip_server.2.register_on_enable = account.34.sip_server.2.failback_subscribe.enable = account.34.sip_server.2.invite_retry_counts = account.34.sip_server.2.only_signal_with_registered =
account.34.naptr_build = account.34.fallback.redundancy_type = account.34.fallback.timeout =
account.34.dns_cache_type = account.34.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.34.anonymous_call =
account.34.reject_anonymous_call =
account.34.send_anonymous_code =
account.34.anonymous_call_oncode =
account.34.anonymous_call_offcode =
account.34.send_anonymous_rejection_code =
account.34.anonymous_reject_oncode =
account.34.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.34.codec.g722.enable =
account.34.codec.g722.priority =
account.34.codec.g729.enable = account.34.codec.g729.priority =
account.34.codec.g726_16.enable = account.34.codec.g726_16.priority =
account.34.codec.g726_24.enable = account.34.codec.g726_24.priority =
account.34.codec.g726_32.enable = account.34.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 216 OF 1142
account.34.codec.g726_40.enable = account.34.codec.g726_40.priority =
account.34.codec.ilbc.enable = account.34.codec.ilbc.priority =
account.34.codec.pcmu.enable = account.34.codec.pcmu.priority =
account.34.codec.pcma.enable = account.34.codec.pcma.priority =
account.34.codec.opus.enable = account.34.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.34.nat.nat_traversal = account.34.nat.udp_update_enable = account.34.nat.udp_update_time = account.34.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.34.blf.subscribe_period = account.34.dtmf.type = account.34.dtmf.dtmf_payload = account.34.dtmf.info_type = account.34.100rel_enable = account.34.subscribe_register = account.34.subscribe_mwi = account.34.subscribe_mwi_expires = account.34.subscribe_mwi_to_vm = voice_mail.number.34 = %BWVOICE-PORTAL-NUMBER-34% account.34.display_mwi.enable = account.34.cid_source = account.34.cid_source_privacy = account.34.cid_source_ppi = account.34.session_timer.enable = account.34.session_timer.expires = account.34.session_timer.refresher = account.34.enable_user_equal_phone = account.34.srtp_encryption = account.34.ptime = account.34.shared_line = %BWSHAREDLINE-BINARY-34% account.34.register_mac = account.34.register_line = account.34.reg_fail_retry_interval = account.34.reg_failed_retry_min_time = account.34.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 217 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.34.conf_type =
account.34.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-34%
account.34.sip_server_type = account.34.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.34.register_expires_overlap = account.34.subscribe_expires_overlap = account.34.auto_dial_enable = account.34.auto_dial_num = account.34.cp_source = account.34.transfer_refer_to_contact_header.enable = #V80 Add account.34.custom_ua = account.34.callpark_enable = account.34.check_cseq.enable = account.34.check_to_tag.enable = account.34.hold_use_inactive = account.34.line_seize.expires = account.34.update_ack_while_dialing = account.34.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.34.always_fwd.enable =
account.34.always_fwd.target =
account.34.always_fwd.off_code =
account.34.always_fwd.on_code =
account.34.busy_fwd.enable =
account.34.busy_fwd.target =
account.34.busy_fwd.off_code =
account.34.busy_fwd.on_code =
account.34.timeout_fwd.enable =
account.34.timeout_fwd.target =
account.34.timeout_fwd.timeout =
account.34.timeout_fwd.off_code =
account.34.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 218 OF 1142
account.34.dnd.enable = account.34.dnd.on_code = account.34.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.34.reg.enable =
handset.34.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.34.xsi.user =%BWLOGIN-ID-34% account.34.xsi.password =%XSIPASSWORD-34% account.34.xsi.host =%XSP_ADDRESS% account.34.xsi.server_type = account.34.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.34.ldap.enable =
handset.34.ldap.name_filter=
handset.34.ldap.number_filter=
handset.34.ldap.host=
handset.34.ldap.port=
handset.34.ldap.base=
handset.34.ldap.user=
handset.34.ldap.password=
handset.34.ldap.max_hits=
handset.34.ldap.name_attr=
handset.34.ldap.numb_attr=
handset.34.ldap.display_name=
handset.34.ldap.version=
handset.34.ldap.call_in_lookup=
handset.34.ldap.ldap_sort=
handset.34.ldap.tls_mode=
handset.34.ldap.call_out_lookup=
handset.34.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account35 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 219 OF 1142
account.35.enable=%BWLINE-BINARY-35% account.35.label=%BWEXTENSION-35% account.35.display_name=%BWCLID-35% account.35.auth_name=%BWAUTHUSER-35% account.35.user_name=%BWLINEPORT-35% account.35.password=%BWAUTHPASSWORD-35%
#W80B ADD account.35.sip_server.template = account.35.media_transmit.enable =
account.35.alarm.template = account.35.alarm.server = account.35.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.35.sip_server.1.failback_mode =
account.35.sip_server.1.failback_timeout =
account.35.sip_server.1.register_on_enable =
account.35.sip_server.1.failback_subscribe.enable =
account.35.sip_server.1.invite_retry_counts =
account.35.sip_server.1.only_signal_with_registered =
account.35.sip_server.2.failback_mode = account.35.sip_server.2.failback_timeout = account.35.sip_server.2.register_on_enable = account.35.sip_server.2.failback_subscribe.enable = account.35.sip_server.2.invite_retry_counts = account.35.sip_server.2.only_signal_with_registered =
account.35.naptr_build = account.35.fallback.redundancy_type = account.35.fallback.timeout =
account.35.dns_cache_type = account.35.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.35.anonymous_call =
account.35.reject_anonymous_call =
account.35.send_anonymous_code =
account.35.anonymous_call_oncode =
account.35.anonymous_call_offcode =
account.35.send_anonymous_rejection_code =
account.35.anonymous_reject_oncode =
account.35.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 220 OF 1142
########################################################################## ############# account.35.codec.g722.enable = account.35.codec.g722.priority =
account.35.codec.g729.enable = account.35.codec.g729.priority =
account.35.codec.g726_16.enable = account.35.codec.g726_16.priority =
account.35.codec.g726_24.enable = account.35.codec.g726_24.priority =
account.35.codec.g726_32.enable = account.35.codec.g726_32.priority =
account.35.codec.g726_40.enable = account.35.codec.g726_40.priority =
account.35.codec.ilbc.enable = account.35.codec.ilbc.priority =
account.35.codec.pcmu.enable = account.35.codec.pcmu.priority =
account.35.codec.pcma.enable = account.35.codec.pcma.priority =
account.35.codec.opus.enable = account.35.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.35.nat.nat_traversal = account.35.nat.udp_update_enable = account.35.nat.udp_update_time = account.35.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.35.blf.subscribe_period = account.35.dtmf.type = account.35.dtmf.dtmf_payload = account.35.dtmf.info_type = account.35.100rel_enable = account.35.subscribe_register = account.35.subscribe_mwi = account.35.subscribe_mwi_expires = account.35.subscribe_mwi_to_vm = voice_mail.number.35 = %BWVOICE-PORTAL-NUMBER-35% account.35.display_mwi.enable = account.35.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 221 OF 1142
account.35.cid_source_privacy = account.35.cid_source_ppi = account.35.session_timer.enable = account.35.session_timer.expires = account.35.session_timer.refresher = account.35.enable_user_equal_phone = account.35.srtp_encryption = account.35.ptime = account.35.shared_line = %BWSHAREDLINE-BINARY-35% account.35.register_mac = account.35.register_line = account.35.reg_fail_retry_interval = account.35.reg_failed_retry_min_time = account.35.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.35.conf_type =
account.35.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-35%
account.35.sip_server_type = account.35.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.35.register_expires_overlap = account.35.subscribe_expires_overlap = account.35.auto_dial_enable = account.35.auto_dial_num = account.35.cp_source = account.35.transfer_refer_to_contact_header.enable = #V80 Add account.35.custom_ua = account.35.callpark_enable = account.35.check_cseq.enable = account.35.check_to_tag.enable = account.35.hold_use_inactive = account.35.line_seize.expires = account.35.update_ack_while_dialing = account.35.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.35.always_fwd.enable =
account.35.always_fwd.target =
account.35.always_fwd.off_code =
account.35.always_fwd.on_code =
account.35.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 222 OF 1142
account.35.busy_fwd.target = account.35.busy_fwd.off_code = account.35.busy_fwd.on_code = account.35.timeout_fwd.enable = account.35.timeout_fwd.target = account.35.timeout_fwd.timeout = account.35.timeout_fwd.off_code = account.35.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.35.dnd.enable =
account.35.dnd.on_code =
account.35.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.35.reg.enable =
handset.35.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.35.xsi.user =%BWLOGIN-ID-35% account.35.xsi.password =%XSIPASSWORD-35% account.35.xsi.host =%XSP_ADDRESS% account.35.xsi.server_type = account.35.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.35.ldap.enable =
handset.35.ldap.name_filter=
handset.35.ldap.number_filter=
handset.35.ldap.host=
handset.35.ldap.port=
handset.35.ldap.base=
handset.35.ldap.user=
handset.35.ldap.password=
handset.35.ldap.max_hits=
handset.35.ldap.name_attr=
handset.35.ldap.numb_attr=
handset.35.ldap.display_name=
handset.35.ldap.version=
handset.35.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 223 OF 1142
handset.35.ldap.ldap_sort= handset.35.ldap.tls_mode= handset.35.ldap.call_out_lookup= handset.35.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account36 Settings
##
##########################################################################
#############
account.36.enable=%BWLINE-BINARY-36% account.36.label=%BWEXTENSION-36% account.36.display_name=%BWCLID-36% account.36.auth_name=%BWAUTHUSER-36% account.36.user_name=%BWLINEPORT-36% account.36.password=%BWAUTHPASSWORD-36%
#W80B ADD account.36.sip_server.template = account.36.media_transmit.enable =
account.36.alarm.template = account.36.alarm.server = account.36.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.36.sip_server.1.failback_mode =
account.36.sip_server.1.failback_timeout =
account.36.sip_server.1.register_on_enable =
account.36.sip_server.1.failback_subscribe.enable =
account.36.sip_server.1.invite_retry_counts =
account.36.sip_server.1.only_signal_with_registered =
account.36.sip_server.2.failback_mode = account.36.sip_server.2.failback_timeout = account.36.sip_server.2.register_on_enable = account.36.sip_server.2.failback_subscribe.enable = account.36.sip_server.2.invite_retry_counts = account.36.sip_server.2.only_signal_with_registered =
account.36.naptr_build = account.36.fallback.redundancy_type = account.36.fallback.timeout =
account.36.dns_cache_type = account.36.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 224 OF 1142
account.36.anonymous_call = account.36.reject_anonymous_call = account.36.send_anonymous_code = account.36.anonymous_call_oncode = account.36.anonymous_call_offcode = account.36.send_anonymous_rejection_code = account.36.anonymous_reject_oncode = account.36.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.36.codec.g722.enable =
account.36.codec.g722.priority =
account.36.codec.g729.enable = account.36.codec.g729.priority =
account.36.codec.g726_16.enable = account.36.codec.g726_16.priority =
account.36.codec.g726_24.enable = account.36.codec.g726_24.priority =
account.36.codec.g726_32.enable = account.36.codec.g726_32.priority =
account.36.codec.g726_40.enable = account.36.codec.g726_40.priority =
account.36.codec.ilbc.enable = account.36.codec.ilbc.priority =
account.36.codec.pcmu.enable = account.36.codec.pcmu.priority =
account.36.codec.pcma.enable = account.36.codec.pcma.priority =
account.36.codec.opus.enable = account.36.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.36.nat.nat_traversal = account.36.nat.udp_update_enable = account.36.nat.udp_update_time = account.36.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 225 OF 1142
########################################################################## #############
account.36.blf.subscribe_period = account.36.dtmf.type = account.36.dtmf.dtmf_payload = account.36.dtmf.info_type = account.36.100rel_enable = account.36.subscribe_register = account.36.subscribe_mwi = account.36.subscribe_mwi_expires = account.36.subscribe_mwi_to_vm = voice_mail.number.36 = %BWVOICE-PORTAL-NUMBER-36% account.36.display_mwi.enable = account.36.cid_source = account.36.cid_source_privacy = account.36.cid_source_ppi = account.36.session_timer.enable = account.36.session_timer.expires = account.36.session_timer.refresher = account.36.enable_user_equal_phone = account.36.srtp_encryption = account.36.ptime = account.36.shared_line = %BWSHAREDLINE-BINARY-36% account.36.register_mac = account.36.register_line = account.36.reg_fail_retry_interval = account.36.reg_failed_retry_min_time = account.36.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.36.conf_type =
account.36.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-36%
account.36.sip_server_type = account.36.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.36.register_expires_overlap = account.36.subscribe_expires_overlap = account.36.auto_dial_enable = account.36.auto_dial_num = account.36.cp_source = account.36.transfer_refer_to_contact_header.enable = #V80 Add account.36.custom_ua = account.36.callpark_enable = account.36.check_cseq.enable = account.36.check_to_tag.enable = account.36.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 226 OF 1142
account.36.line_seize.expires = account.36.update_ack_while_dialing = account.36.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.36.always_fwd.enable =
account.36.always_fwd.target =
account.36.always_fwd.off_code =
account.36.always_fwd.on_code =
account.36.busy_fwd.enable =
account.36.busy_fwd.target =
account.36.busy_fwd.off_code =
account.36.busy_fwd.on_code =
account.36.timeout_fwd.enable =
account.36.timeout_fwd.target =
account.36.timeout_fwd.timeout =
account.36.timeout_fwd.off_code =
account.36.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.36.dnd.enable =
account.36.dnd.on_code =
account.36.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.36.reg.enable =
handset.36.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.36.xsi.user =%BWLOGIN-ID-36% account.36.xsi.password =%XSIPASSWORD-36% account.36.xsi.host =%XSP_ADDRESS% account.36.xsi.server_type = account.36.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 227 OF 1142
########################################################################## ############# handset.36.ldap.enable = handset.36.ldap.name_filter= handset.36.ldap.number_filter= handset.36.ldap.host= handset.36.ldap.port= handset.36.ldap.base= handset.36.ldap.user= handset.36.ldap.password= handset.36.ldap.max_hits= handset.36.ldap.name_attr= handset.36.ldap.numb_attr= handset.36.ldap.display_name= handset.36.ldap.version= handset.36.ldap.call_in_lookup= handset.36.ldap.ldap_sort= handset.36.ldap.tls_mode= handset.36.ldap.call_out_lookup= handset.36.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account37 Settings
##
##########################################################################
#############
account.37.enable=%BWLINE-BINARY-37% account.37.label=%BWEXTENSION-37% account.37.display_name=%BWCLID-37% account.37.auth_name=%BWAUTHUSER-37% account.37.user_name=%BWLINEPORT-37% account.37.password=%BWAUTHPASSWORD-37%
#W80B ADD account.37.sip_server.template = account.37.media_transmit.enable =
account.37.alarm.template = account.37.alarm.server = account.37.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.37.sip_server.1.failback_mode =
account.37.sip_server.1.failback_timeout =
account.37.sip_server.1.register_on_enable =
account.37.sip_server.1.failback_subscribe.enable =
account.37.sip_server.1.invite_retry_counts =
account.37.sip_server.1.only_signal_with_registered =
account.37.sip_server.2.failback_mode = account.37.sip_server.2.failback_timeout = account.37.sip_server.2.register_on_enable = account.37.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 228 OF 1142
account.37.sip_server.2.invite_retry_counts = account.37.sip_server.2.only_signal_with_registered =
account.37.naptr_build = account.37.fallback.redundancy_type = account.37.fallback.timeout =
account.37.dns_cache_type = account.37.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.37.anonymous_call =
account.37.reject_anonymous_call =
account.37.send_anonymous_code =
account.37.anonymous_call_oncode =
account.37.anonymous_call_offcode =
account.37.send_anonymous_rejection_code =
account.37.anonymous_reject_oncode =
account.37.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.37.codec.g722.enable =
account.37.codec.g722.priority =
account.37.codec.g729.enable = account.37.codec.g729.priority =
account.37.codec.g726_16.enable = account.37.codec.g726_16.priority =
account.37.codec.g726_24.enable = account.37.codec.g726_24.priority =
account.37.codec.g726_32.enable = account.37.codec.g726_32.priority =
account.37.codec.g726_40.enable = account.37.codec.g726_40.priority =
account.37.codec.ilbc.enable = account.37.codec.ilbc.priority =
account.37.codec.pcmu.enable = account.37.codec.pcmu.priority =
account.37.codec.pcma.enable = account.37.codec.pcma.priority =
account.37.codec.opus.enable = account.37.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 229 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.37.nat.nat_traversal = account.37.nat.udp_update_enable = account.37.nat.udp_update_time = account.37.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.37.blf.subscribe_period = account.37.dtmf.type = account.37.dtmf.dtmf_payload = account.37.dtmf.info_type = account.37.100rel_enable = account.37.subscribe_register = account.37.subscribe_mwi = account.37.subscribe_mwi_expires = account.37.subscribe_mwi_to_vm = voice_mail.number.37 = %BWVOICE-PORTAL-NUMBER-37% account.37.display_mwi.enable = account.37.cid_source = account.37.cid_source_privacy = account.37.cid_source_ppi = account.37.session_timer.enable = account.37.session_timer.expires = account.37.session_timer.refresher = account.37.enable_user_equal_phone = account.37.srtp_encryption = account.37.ptime = account.37.shared_line = %BWSHAREDLINE-BINARY-37% account.37.register_mac = account.37.register_line = account.37.reg_fail_retry_interval = account.37.reg_failed_retry_min_time = account.37.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.37.conf_type =
account.37.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-37%
account.37.sip_server_type = account.37.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 230 OF 1142
########################################################################## ############# ##DECT V81 Add
account.37.register_expires_overlap = account.37.subscribe_expires_overlap = account.37.auto_dial_enable = account.37.auto_dial_num = account.37.cp_source = account.37.transfer_refer_to_contact_header.enable = #V80 Add account.37.custom_ua = account.37.callpark_enable = account.37.check_cseq.enable = account.37.check_to_tag.enable = account.37.hold_use_inactive = account.37.line_seize.expires = account.37.update_ack_while_dialing = account.37.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.37.always_fwd.enable =
account.37.always_fwd.target =
account.37.always_fwd.off_code =
account.37.always_fwd.on_code =
account.37.busy_fwd.enable =
account.37.busy_fwd.target =
account.37.busy_fwd.off_code =
account.37.busy_fwd.on_code =
account.37.timeout_fwd.enable =
account.37.timeout_fwd.target =
account.37.timeout_fwd.timeout =
account.37.timeout_fwd.off_code =
account.37.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.37.dnd.enable =
account.37.dnd.on_code =
account.37.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.37.reg.enable =
handset.37.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 231 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.37.xsi.user =%BWLOGIN-ID-37% account.37.xsi.password =%XSIPASSWORD-37% account.37.xsi.host =%XSP_ADDRESS% account.37.xsi.server_type = account.37.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.37.ldap.enable =
handset.37.ldap.name_filter=
handset.37.ldap.number_filter=
handset.37.ldap.host=
handset.37.ldap.port=
handset.37.ldap.base=
handset.37.ldap.user=
handset.37.ldap.password=
handset.37.ldap.max_hits=
handset.37.ldap.name_attr=
handset.37.ldap.numb_attr=
handset.37.ldap.display_name=
handset.37.ldap.version=
handset.37.ldap.call_in_lookup=
handset.37.ldap.ldap_sort=
handset.37.ldap.tls_mode=
handset.37.ldap.call_out_lookup=
handset.37.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account38 Settings
##
##########################################################################
#############
account.38.enable=%BWLINE-BINARY-38% account.38.label=%BWEXTENSION-38% account.38.display_name=%BWCLID-38% account.38.auth_name=%BWAUTHUSER-38% account.38.user_name=%BWLINEPORT-38% account.38.password=%BWAUTHPASSWORD-38%
#W80B ADD account.38.sip_server.template = account.38.media_transmit.enable =
account.38.alarm.template = account.38.alarm.server = account.38.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 232 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.38.sip_server.1.failback_mode =
account.38.sip_server.1.failback_timeout =
account.38.sip_server.1.register_on_enable =
account.38.sip_server.1.failback_subscribe.enable =
account.38.sip_server.1.invite_retry_counts =
account.38.sip_server.1.only_signal_with_registered =
account.38.sip_server.2.failback_mode = account.38.sip_server.2.failback_timeout = account.38.sip_server.2.register_on_enable = account.38.sip_server.2.failback_subscribe.enable = account.38.sip_server.2.invite_retry_counts = account.38.sip_server.2.only_signal_with_registered =
account.38.naptr_build = account.38.fallback.redundancy_type = account.38.fallback.timeout =
account.38.dns_cache_type = account.38.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.38.anonymous_call =
account.38.reject_anonymous_call =
account.38.send_anonymous_code =
account.38.anonymous_call_oncode =
account.38.anonymous_call_offcode =
account.38.send_anonymous_rejection_code =
account.38.anonymous_reject_oncode =
account.38.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.38.codec.g722.enable =
account.38.codec.g722.priority =
account.38.codec.g729.enable = account.38.codec.g729.priority =
account.38.codec.g726_16.enable = account.38.codec.g726_16.priority =
account.38.codec.g726_24.enable = account.38.codec.g726_24.priority =
account.38.codec.g726_32.enable = account.38.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 233 OF 1142
account.38.codec.g726_40.enable = account.38.codec.g726_40.priority =
account.38.codec.ilbc.enable = account.38.codec.ilbc.priority =
account.38.codec.pcmu.enable = account.38.codec.pcmu.priority =
account.38.codec.pcma.enable = account.38.codec.pcma.priority =
account.38.codec.opus.enable = account.38.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.38.nat.nat_traversal = account.38.nat.udp_update_enable = account.38.nat.udp_update_time = account.38.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.38.blf.subscribe_period = account.38.dtmf.type = account.38.dtmf.dtmf_payload = account.38.dtmf.info_type = account.38.100rel_enable = account.38.subscribe_register = account.38.subscribe_mwi = account.38.subscribe_mwi_expires = account.38.subscribe_mwi_to_vm = voice_mail.number.38 = %BWVOICE-PORTAL-NUMBER-38% account.38.display_mwi.enable = account.38.cid_source = account.38.cid_source_privacy = account.38.cid_source_ppi = account.38.session_timer.enable = account.38.session_timer.expires = account.38.session_timer.refresher = account.38.enable_user_equal_phone = account.38.srtp_encryption = account.38.ptime = account.38.shared_line = %BWSHAREDLINE-BINARY-38% account.38.register_mac = account.38.register_line = account.38.reg_fail_retry_interval = account.38.reg_failed_retry_min_time = account.38.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 234 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.38.conf_type =
account.38.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-38%
account.38.sip_server_type = account.38.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.38.register_expires_overlap = account.38.subscribe_expires_overlap = account.38.auto_dial_enable = account.38.auto_dial_num = account.38.cp_source = account.38.transfer_refer_to_contact_header.enable = #V80 Add account.38.custom_ua = account.38.callpark_enable = account.38.check_cseq.enable = account.38.check_to_tag.enable = account.38.hold_use_inactive = account.38.line_seize.expires = account.38.update_ack_while_dialing = account.38.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.38.always_fwd.enable =
account.38.always_fwd.target =
account.38.always_fwd.off_code =
account.38.always_fwd.on_code =
account.38.busy_fwd.enable =
account.38.busy_fwd.target =
account.38.busy_fwd.off_code =
account.38.busy_fwd.on_code =
account.38.timeout_fwd.enable =
account.38.timeout_fwd.target =
account.38.timeout_fwd.timeout =
account.38.timeout_fwd.off_code =
account.38.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 235 OF 1142
account.38.dnd.enable = account.38.dnd.on_code = account.38.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.38.reg.enable =
handset.38.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.38.xsi.user =%BWLOGIN-ID-38% account.38.xsi.password =%XSIPASSWORD-38% account.38.xsi.host =%XSP_ADDRESS% account.38.xsi.server_type = account.38.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.38.ldap.enable =
handset.38.ldap.name_filter=
handset.38.ldap.number_filter=
handset.38.ldap.host=
handset.38.ldap.port=
handset.38.ldap.base=
handset.38.ldap.user=
handset.38.ldap.password=
handset.38.ldap.max_hits=
handset.38.ldap.name_attr=
handset.38.ldap.numb_attr=
handset.38.ldap.display_name=
handset.38.ldap.version=
handset.38.ldap.call_in_lookup=
handset.38.ldap.ldap_sort=
handset.38.ldap.tls_mode=
handset.38.ldap.call_out_lookup=
handset.38.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account39 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 236 OF 1142
account.39.enable=%BWLINE-BINARY-39% account.39.label=%BWEXTENSION-39% account.39.display_name=%BWCLID-39% account.39.auth_name=%BWAUTHUSER-39% account.39.user_name=%BWLINEPORT-39% account.39.password=%BWAUTHPASSWORD-39%
#W80B ADD account.39.sip_server.template = account.39.media_transmit.enable =
account.39.alarm.template = account.39.alarm.server = account.39.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.39.sip_server.1.failback_mode =
account.39.sip_server.1.failback_timeout =
account.39.sip_server.1.register_on_enable =
account.39.sip_server.1.failback_subscribe.enable =
account.39.sip_server.1.invite_retry_counts =
account.39.sip_server.1.only_signal_with_registered =
account.39.sip_server.2.failback_mode = account.39.sip_server.2.failback_timeout = account.39.sip_server.2.register_on_enable = account.39.sip_server.2.failback_subscribe.enable = account.39.sip_server.2.invite_retry_counts = account.39.sip_server.2.only_signal_with_registered =
account.39.naptr_build = account.39.fallback.redundancy_type = account.39.fallback.timeout =
account.39.dns_cache_type = account.39.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.39.anonymous_call =
account.39.reject_anonymous_call =
account.39.send_anonymous_code =
account.39.anonymous_call_oncode =
account.39.anonymous_call_offcode =
account.39.send_anonymous_rejection_code =
account.39.anonymous_reject_oncode =
account.39.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 237 OF 1142
########################################################################## ############# account.39.codec.g722.enable = account.39.codec.g722.priority =
account.39.codec.g729.enable = account.39.codec.g729.priority =
account.39.codec.g726_16.enable = account.39.codec.g726_16.priority =
account.39.codec.g726_24.enable = account.39.codec.g726_24.priority =
account.39.codec.g726_32.enable = account.39.codec.g726_32.priority =
account.39.codec.g726_40.enable = account.39.codec.g726_40.priority =
account.39.codec.ilbc.enable = account.39.codec.ilbc.priority =
account.39.codec.pcmu.enable = account.39.codec.pcmu.priority =
account.39.codec.pcma.enable = account.39.codec.pcma.priority =
account.39.codec.opus.enable = account.39.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.39.nat.nat_traversal = account.39.nat.udp_update_enable = account.39.nat.udp_update_time = account.39.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.39.blf.subscribe_period = account.39.dtmf.type = account.39.dtmf.dtmf_payload = account.39.dtmf.info_type = account.39.100rel_enable = account.39.subscribe_register = account.39.subscribe_mwi = account.39.subscribe_mwi_expires = account.39.subscribe_mwi_to_vm = voice_mail.number.39 = %BWVOICE-PORTAL-NUMBER-39% account.39.display_mwi.enable = account.39.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 238 OF 1142
account.39.cid_source_privacy = account.39.cid_source_ppi = account.39.session_timer.enable = account.39.session_timer.expires = account.39.session_timer.refresher = account.39.enable_user_equal_phone = account.39.srtp_encryption = account.39.ptime = account.39.shared_line = %BWSHAREDLINE-BINARY-39% account.39.register_mac = account.39.register_line = account.39.reg_fail_retry_interval = account.39.reg_failed_retry_min_time = account.39.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.39.conf_type =
account.39.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-39%
account.39.sip_server_type = account.39.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.39.register_expires_overlap = account.39.subscribe_expires_overlap = account.39.auto_dial_enable = account.39.auto_dial_num = account.39.cp_source = account.39.transfer_refer_to_contact_header.enable = #V80 Add account.39.custom_ua = account.39.callpark_enable = account.39.check_cseq.enable = account.39.check_to_tag.enable = account.39.hold_use_inactive = account.39.line_seize.expires = account.39.update_ack_while_dialing = account.39.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.39.always_fwd.enable =
account.39.always_fwd.target =
account.39.always_fwd.off_code =
account.39.always_fwd.on_code =
account.39.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 239 OF 1142
account.39.busy_fwd.target = account.39.busy_fwd.off_code = account.39.busy_fwd.on_code = account.39.timeout_fwd.enable = account.39.timeout_fwd.target = account.39.timeout_fwd.timeout = account.39.timeout_fwd.off_code = account.39.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.39.dnd.enable =
account.39.dnd.on_code =
account.39.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.39.reg.enable =
handset.39.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.39.xsi.user =%BWLOGIN-ID-39% account.39.xsi.password =%XSIPASSWORD-39% account.39.xsi.host =%XSP_ADDRESS% account.39.xsi.server_type = account.39.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.39.ldap.enable =
handset.39.ldap.name_filter=
handset.39.ldap.number_filter=
handset.39.ldap.host=
handset.39.ldap.port=
handset.39.ldap.base=
handset.39.ldap.user=
handset.39.ldap.password=
handset.39.ldap.max_hits=
handset.39.ldap.name_attr=
handset.39.ldap.numb_attr=
handset.39.ldap.display_name=
handset.39.ldap.version=
handset.39.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 240 OF 1142
handset.39.ldap.ldap_sort= handset.39.ldap.tls_mode= handset.39.ldap.call_out_lookup= handset.39.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account40 Settings
##
##########################################################################
#############
account.40.enable=%BWLINE-BINARY-40% account.40.label=%BWEXTENSION-40% account.40.display_name=%BWCLID-40% account.40.auth_name=%BWAUTHUSER-40% account.40.user_name=%BWLINEPORT-40% account.40.password=%BWAUTHPASSWORD-40%
#W80B ADD account.40.sip_server.template = account.40.media_transmit.enable =
account.40.alarm.template = account.40.alarm.server = account.40.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.40.sip_server.1.failback_mode =
account.40.sip_server.1.failback_timeout =
account.40.sip_server.1.register_on_enable =
account.40.sip_server.1.failback_subscribe.enable =
account.40.sip_server.1.invite_retry_counts =
account.40.sip_server.1.only_signal_with_registered =
account.40.sip_server.2.failback_mode = account.40.sip_server.2.failback_timeout = account.40.sip_server.2.register_on_enable = account.40.sip_server.2.failback_subscribe.enable = account.40.sip_server.2.invite_retry_counts = account.40.sip_server.2.only_signal_with_registered =
account.40.naptr_build = account.40.fallback.redundancy_type = account.40.fallback.timeout =
account.40.dns_cache_type = account.40.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 241 OF 1142
account.40.anonymous_call = account.40.reject_anonymous_call = account.40.send_anonymous_code = account.40.anonymous_call_oncode = account.40.anonymous_call_offcode = account.40.send_anonymous_rejection_code = account.40.anonymous_reject_oncode = account.40.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.40.codec.g722.enable =
account.40.codec.g722.priority =
account.40.codec.g729.enable = account.40.codec.g729.priority =
account.40.codec.g726_16.enable = account.40.codec.g726_16.priority =
account.40.codec.g726_24.enable = account.40.codec.g726_24.priority =
account.40.codec.g726_32.enable = account.40.codec.g726_32.priority =
account.40.codec.g726_40.enable = account.40.codec.g726_40.priority =
account.40.codec.ilbc.enable = account.40.codec.ilbc.priority =
account.40.codec.pcmu.enable = account.40.codec.pcmu.priority =
account.40.codec.pcma.enable = account.40.codec.pcma.priority =
account.40.codec.opus.enable = account.40.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.40.nat.nat_traversal = account.40.nat.udp_update_enable = account.40.nat.udp_update_time = account.40.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 242 OF 1142
########################################################################## #############
account.40.blf.subscribe_period = account.40.dtmf.type = account.40.dtmf.dtmf_payload = account.40.dtmf.info_type = account.40.100rel_enable = account.40.subscribe_register = account.40.subscribe_mwi = account.40.subscribe_mwi_expires = account.40.subscribe_mwi_to_vm = voice_mail.number.40 = %BWVOICE-PORTAL-NUMBER-40% account.40.display_mwi.enable = account.40.cid_source = account.40.cid_source_privacy = account.40.cid_source_ppi = account.40.session_timer.enable = account.40.session_timer.expires = account.40.session_timer.refresher = account.40.enable_user_equal_phone = account.40.srtp_encryption = account.40.ptime = account.40.shared_line = %BWSHAREDLINE-BINARY-40% account.40.register_mac = account.40.register_line = account.40.reg_fail_retry_interval = account.40.reg_failed_retry_min_time = account.40.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.40.conf_type =
account.40.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-40%
account.40.sip_server_type = account.40.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.40.register_expires_overlap = account.40.subscribe_expires_overlap = account.40.auto_dial_enable = account.40.auto_dial_num = account.40.cp_source = account.40.transfer_refer_to_contact_header.enable = #V80 Add account.40.custom_ua = account.40.callpark_enable = account.40.check_cseq.enable = account.40.check_to_tag.enable = account.40.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 243 OF 1142
account.40.line_seize.expires = account.40.update_ack_while_dialing = account.40.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.40.always_fwd.enable =
account.40.always_fwd.target =
account.40.always_fwd.off_code =
account.40.always_fwd.on_code =
account.40.busy_fwd.enable =
account.40.busy_fwd.target =
account.40.busy_fwd.off_code =
account.40.busy_fwd.on_code =
account.40.timeout_fwd.enable =
account.40.timeout_fwd.target =
account.40.timeout_fwd.timeout =
account.40.timeout_fwd.off_code =
account.40.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.40.dnd.enable =
account.40.dnd.on_code =
account.40.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.40.reg.enable =
handset.40.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.40.xsi.user =%BWLOGIN-ID-40% account.40.xsi.password =%XSIPASSWORD-40% account.40.xsi.host =%XSP_ADDRESS% account.40.xsi.server_type = account.40.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 244 OF 1142
########################################################################## ############# handset.40.ldap.enable = handset.40.ldap.name_filter= handset.40.ldap.number_filter= handset.40.ldap.host= handset.40.ldap.port= handset.40.ldap.base= handset.40.ldap.user= handset.40.ldap.password= handset.40.ldap.max_hits= handset.40.ldap.name_attr= handset.40.ldap.numb_attr= handset.40.ldap.display_name= handset.40.ldap.version= handset.40.ldap.call_in_lookup= handset.40.ldap.ldap_sort= handset.40.ldap.tls_mode= handset.40.ldap.call_out_lookup= handset.40.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account41 Settings
##
##########################################################################
#############
account.41.enable=%BWLINE-BINARY-41% account.41.label=%BWEXTENSION-41% account.41.display_name=%BWCLID-41% account.41.auth_name=%BWAUTHUSER-41% account.41.user_name=%BWLINEPORT-41% account.41.password=%BWAUTHPASSWORD-41%
#W80B ADD account.41.sip_server.template = account.41.media_transmit.enable =
account.41.alarm.template = account.41.alarm.server = account.41.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.41.sip_server.1.failback_mode =
account.41.sip_server.1.failback_timeout =
account.41.sip_server.1.register_on_enable =
account.41.sip_server.1.failback_subscribe.enable =
account.41.sip_server.1.invite_retry_counts =
account.41.sip_server.1.only_signal_with_registered =
account.41.sip_server.2.failback_mode = account.41.sip_server.2.failback_timeout = account.41.sip_server.2.register_on_enable = account.41.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 245 OF 1142
account.41.sip_server.2.invite_retry_counts = account.41.sip_server.2.only_signal_with_registered =
account.41.naptr_build = account.41.fallback.redundancy_type = account.41.fallback.timeout =
account.41.dns_cache_type = account.41.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.41.anonymous_call =
account.41.reject_anonymous_call =
account.41.send_anonymous_code =
account.41.anonymous_call_oncode =
account.41.anonymous_call_offcode =
account.41.send_anonymous_rejection_code =
account.41.anonymous_reject_oncode =
account.41.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.41.codec.g722.enable =
account.41.codec.g722.priority =
account.41.codec.g729.enable = account.41.codec.g729.priority =
account.41.codec.g726_16.enable = account.41.codec.g726_16.priority =
account.41.codec.g726_24.enable = account.41.codec.g726_24.priority =
account.41.codec.g726_32.enable = account.41.codec.g726_32.priority =
account.41.codec.g726_40.enable = account.41.codec.g726_40.priority =
account.41.codec.ilbc.enable = account.41.codec.ilbc.priority =
account.41.codec.pcmu.enable = account.41.codec.pcmu.priority =
account.41.codec.pcma.enable = account.41.codec.pcma.priority =
account.41.codec.opus.enable = account.41.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 246 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.41.nat.nat_traversal = account.41.nat.udp_update_enable = account.41.nat.udp_update_time = account.41.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.41.blf.subscribe_period = account.41.dtmf.type = account.41.dtmf.dtmf_payload = account.41.dtmf.info_type = account.41.100rel_enable = account.41.subscribe_register = account.41.subscribe_mwi = account.41.subscribe_mwi_expires = account.41.subscribe_mwi_to_vm = voice_mail.number.41 = %BWVOICE-PORTAL-NUMBER-41% account.41.display_mwi.enable = account.41.cid_source = account.41.cid_source_privacy = account.41.cid_source_ppi = account.41.session_timer.enable = account.41.session_timer.expires = account.41.session_timer.refresher = account.41.enable_user_equal_phone = account.41.srtp_encryption = account.41.ptime = account.41.shared_line = %BWSHAREDLINE-BINARY-41% account.41.register_mac = account.41.register_line = account.41.reg_fail_retry_interval = account.41.reg_failed_retry_min_time = account.41.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.41.conf_type =
account.41.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-41%
account.41.sip_server_type = account.41.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 247 OF 1142
########################################################################## ############# ##DECT V81 Add
account.41.register_expires_overlap = account.41.subscribe_expires_overlap = account.41.auto_dial_enable = account.41.auto_dial_num = account.41.cp_source = account.41.transfer_refer_to_contact_header.enable = #V80 Add account.41.custom_ua = account.41.callpark_enable = account.41.check_cseq.enable = account.41.check_to_tag.enable = account.41.hold_use_inactive = account.41.line_seize.expires = account.41.update_ack_while_dialing = account.41.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.41.always_fwd.enable =
account.41.always_fwd.target =
account.41.always_fwd.off_code =
account.41.always_fwd.on_code =
account.41.busy_fwd.enable =
account.41.busy_fwd.target =
account.41.busy_fwd.off_code =
account.41.busy_fwd.on_code =
account.41.timeout_fwd.enable =
account.41.timeout_fwd.target =
account.41.timeout_fwd.timeout =
account.41.timeout_fwd.off_code =
account.41.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.41.dnd.enable =
account.41.dnd.on_code =
account.41.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.41.reg.enable =
handset.41.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 248 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.41.xsi.user =%BWLOGIN-ID-41% account.41.xsi.password =%XSIPASSWORD-41% account.41.xsi.host =%XSP_ADDRESS% account.41.xsi.server_type = account.41.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.41.ldap.enable =
handset.41.ldap.name_filter=
handset.41.ldap.number_filter=
handset.41.ldap.host=
handset.41.ldap.port=
handset.41.ldap.base=
handset.41.ldap.user=
handset.41.ldap.password=
handset.41.ldap.max_hits=
handset.41.ldap.name_attr=
handset.41.ldap.numb_attr=
handset.41.ldap.display_name=
handset.41.ldap.version=
handset.41.ldap.call_in_lookup=
handset.41.ldap.ldap_sort=
handset.41.ldap.tls_mode=
handset.41.ldap.call_out_lookup=
handset.41.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account42 Settings
##
##########################################################################
#############
account.42.enable=%BWLINE-BINARY-42% account.42.label=%BWEXTENSION-42% account.42.display_name=%BWCLID-42% account.42.auth_name=%BWAUTHUSER-42% account.42.user_name=%BWLINEPORT-42% account.42.password=%BWAUTHPASSWORD-42%
#W80B ADD account.42.sip_server.template = account.42.media_transmit.enable =
account.42.alarm.template = account.42.alarm.server = account.42.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 249 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.42.sip_server.1.failback_mode =
account.42.sip_server.1.failback_timeout =
account.42.sip_server.1.register_on_enable =
account.42.sip_server.1.failback_subscribe.enable =
account.42.sip_server.1.invite_retry_counts =
account.42.sip_server.1.only_signal_with_registered =
account.42.sip_server.2.failback_mode = account.42.sip_server.2.failback_timeout = account.42.sip_server.2.register_on_enable = account.42.sip_server.2.failback_subscribe.enable = account.42.sip_server.2.invite_retry_counts = account.42.sip_server.2.only_signal_with_registered =
account.42.naptr_build = account.42.fallback.redundancy_type = account.42.fallback.timeout =
account.42.dns_cache_type = account.42.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.42.anonymous_call =
account.42.reject_anonymous_call =
account.42.send_anonymous_code =
account.42.anonymous_call_oncode =
account.42.anonymous_call_offcode =
account.42.send_anonymous_rejection_code =
account.42.anonymous_reject_oncode =
account.42.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.42.codec.g722.enable =
account.42.codec.g722.priority =
account.42.codec.g729.enable = account.42.codec.g729.priority =
account.42.codec.g726_16.enable = account.42.codec.g726_16.priority =
account.42.codec.g726_24.enable = account.42.codec.g726_24.priority =
account.42.codec.g726_32.enable = account.42.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 250 OF 1142
account.42.codec.g726_40.enable = account.42.codec.g726_40.priority =
account.42.codec.ilbc.enable = account.42.codec.ilbc.priority =
account.42.codec.pcmu.enable = account.42.codec.pcmu.priority =
account.42.codec.pcma.enable = account.42.codec.pcma.priority =
account.42.codec.opus.enable = account.42.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.42.nat.nat_traversal = account.42.nat.udp_update_enable = account.42.nat.udp_update_time = account.42.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.42.blf.subscribe_period = account.42.dtmf.type = account.42.dtmf.dtmf_payload = account.42.dtmf.info_type = account.42.100rel_enable = account.42.subscribe_register = account.42.subscribe_mwi = account.42.subscribe_mwi_expires = account.42.subscribe_mwi_to_vm = voice_mail.number.42 = %BWVOICE-PORTAL-NUMBER-42% account.42.display_mwi.enable = account.42.cid_source = account.42.cid_source_privacy = account.42.cid_source_ppi = account.42.session_timer.enable = account.42.session_timer.expires = account.42.session_timer.refresher = account.42.enable_user_equal_phone = account.42.srtp_encryption = account.42.ptime = account.42.shared_line = %BWSHAREDLINE-BINARY-42% account.42.register_mac = account.42.register_line = account.42.reg_fail_retry_interval = account.42.reg_failed_retry_min_time = account.42.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 251 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.42.conf_type =
account.42.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-42%
account.42.sip_server_type = account.42.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.42.register_expires_overlap = account.42.subscribe_expires_overlap = account.42.auto_dial_enable = account.42.auto_dial_num = account.42.cp_source = account.42.transfer_refer_to_contact_header.enable = #V80 Add account.42.custom_ua = account.42.callpark_enable = account.42.check_cseq.enable = account.42.check_to_tag.enable = account.42.hold_use_inactive = account.42.line_seize.expires = account.42.update_ack_while_dialing = account.42.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.42.always_fwd.enable =
account.42.always_fwd.target =
account.42.always_fwd.off_code =
account.42.always_fwd.on_code =
account.42.busy_fwd.enable =
account.42.busy_fwd.target =
account.42.busy_fwd.off_code =
account.42.busy_fwd.on_code =
account.42.timeout_fwd.enable =
account.42.timeout_fwd.target =
account.42.timeout_fwd.timeout =
account.42.timeout_fwd.off_code =
account.42.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 252 OF 1142
account.42.dnd.enable = account.42.dnd.on_code = account.42.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.42.reg.enable =
handset.42.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.42.xsi.user =%BWLOGIN-ID-42% account.42.xsi.password =%XSIPASSWORD-42% account.42.xsi.host =%XSP_ADDRESS% account.42.xsi.server_type = account.42.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.42.ldap.enable =
handset.42.ldap.name_filter=
handset.42.ldap.number_filter=
handset.42.ldap.host=
handset.42.ldap.port=
handset.42.ldap.base=
handset.42.ldap.user=
handset.42.ldap.password=
handset.42.ldap.max_hits=
handset.42.ldap.name_attr=
handset.42.ldap.numb_attr=
handset.42.ldap.display_name=
handset.42.ldap.version=
handset.42.ldap.call_in_lookup=
handset.42.ldap.ldap_sort=
handset.42.ldap.tls_mode=
handset.42.ldap.call_out_lookup=
handset.42.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account43 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 253 OF 1142
account.43.enable=%BWLINE-BINARY-43% account.43.label=%BWEXTENSION-43% account.43.display_name=%BWCLID-43% account.43.auth_name=%BWAUTHUSER-43% account.43.user_name=%BWLINEPORT-43% account.43.password=%BWAUTHPASSWORD-43%
#W80B ADD account.43.sip_server.template = account.43.media_transmit.enable =
account.43.alarm.template = account.43.alarm.server = account.43.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.43.sip_server.1.failback_mode =
account.43.sip_server.1.failback_timeout =
account.43.sip_server.1.register_on_enable =
account.43.sip_server.1.failback_subscribe.enable =
account.43.sip_server.1.invite_retry_counts =
account.43.sip_server.1.only_signal_with_registered =
account.43.sip_server.2.failback_mode = account.43.sip_server.2.failback_timeout = account.43.sip_server.2.register_on_enable = account.43.sip_server.2.failback_subscribe.enable = account.43.sip_server.2.invite_retry_counts = account.43.sip_server.2.only_signal_with_registered =
account.43.naptr_build = account.43.fallback.redundancy_type = account.43.fallback.timeout =
account.43.dns_cache_type = account.43.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.43.anonymous_call =
account.43.reject_anonymous_call =
account.43.send_anonymous_code =
account.43.anonymous_call_oncode =
account.43.anonymous_call_offcode =
account.43.send_anonymous_rejection_code =
account.43.anonymous_reject_oncode =
account.43.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 254 OF 1142
########################################################################## ############# account.43.codec.g722.enable = account.43.codec.g722.priority =
account.43.codec.g729.enable = account.43.codec.g729.priority =
account.43.codec.g726_16.enable = account.43.codec.g726_16.priority =
account.43.codec.g726_24.enable = account.43.codec.g726_24.priority =
account.43.codec.g726_32.enable = account.43.codec.g726_32.priority =
account.43.codec.g726_40.enable = account.43.codec.g726_40.priority =
account.43.codec.ilbc.enable = account.43.codec.ilbc.priority =
account.43.codec.pcmu.enable = account.43.codec.pcmu.priority =
account.43.codec.pcma.enable = account.43.codec.pcma.priority =
account.43.codec.opus.enable = account.43.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.43.nat.nat_traversal = account.43.nat.udp_update_enable = account.43.nat.udp_update_time = account.43.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.43.blf.subscribe_period = account.43.dtmf.type = account.43.dtmf.dtmf_payload = account.43.dtmf.info_type = account.43.100rel_enable = account.43.subscribe_register = account.43.subscribe_mwi = account.43.subscribe_mwi_expires = account.43.subscribe_mwi_to_vm = voice_mail.number.43 = %BWVOICE-PORTAL-NUMBER-43% account.43.display_mwi.enable = account.43.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 255 OF 1142
account.43.cid_source_privacy = account.43.cid_source_ppi = account.43.session_timer.enable = account.43.session_timer.expires = account.43.session_timer.refresher = account.43.enable_user_equal_phone = account.43.srtp_encryption = account.43.ptime = account.43.shared_line = %BWSHAREDLINE-BINARY-43% account.43.register_mac = account.43.register_line = account.43.reg_fail_retry_interval = account.43.reg_failed_retry_min_time = account.43.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.43.conf_type =
account.43.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-43%
account.43.sip_server_type = account.43.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.43.register_expires_overlap = account.43.subscribe_expires_overlap = account.43.auto_dial_enable = account.43.auto_dial_num = account.43.cp_source = account.43.transfer_refer_to_contact_header.enable = #V80 Add account.43.custom_ua = account.43.callpark_enable = account.43.check_cseq.enable = account.43.check_to_tag.enable = account.43.hold_use_inactive = account.43.line_seize.expires = account.43.update_ack_while_dialing = account.43.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.43.always_fwd.enable =
account.43.always_fwd.target =
account.43.always_fwd.off_code =
account.43.always_fwd.on_code =
account.43.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 256 OF 1142
account.43.busy_fwd.target = account.43.busy_fwd.off_code = account.43.busy_fwd.on_code = account.43.timeout_fwd.enable = account.43.timeout_fwd.target = account.43.timeout_fwd.timeout = account.43.timeout_fwd.off_code = account.43.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.43.dnd.enable =
account.43.dnd.on_code =
account.43.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.43.reg.enable =
handset.43.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.43.xsi.user =%BWLOGIN-ID-43% account.43.xsi.password =%XSIPASSWORD-43% account.43.xsi.host =%XSP_ADDRESS% account.43.xsi.server_type = account.43.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.43.ldap.enable =
handset.43.ldap.name_filter=
handset.43.ldap.number_filter=
handset.43.ldap.host=
handset.43.ldap.port=
handset.43.ldap.base=
handset.43.ldap.user=
handset.43.ldap.password=
handset.43.ldap.max_hits=
handset.43.ldap.name_attr=
handset.43.ldap.numb_attr=
handset.43.ldap.display_name=
handset.43.ldap.version=
handset.43.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 257 OF 1142
handset.43.ldap.ldap_sort= handset.43.ldap.tls_mode= handset.43.ldap.call_out_lookup= handset.43.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account44 Settings
##
##########################################################################
#############
account.44.enable=%BWLINE-BINARY-44% account.44.label=%BWEXTENSION-44% account.44.display_name=%BWCLID-44% account.44.auth_name=%BWAUTHUSER-44% account.44.user_name=%BWLINEPORT-44% account.44.password=%BWAUTHPASSWORD-44%
#W80B ADD account.44.sip_server.template = account.44.media_transmit.enable =
account.44.alarm.template = account.44.alarm.server = account.44.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.44.sip_server.1.failback_mode =
account.44.sip_server.1.failback_timeout =
account.44.sip_server.1.register_on_enable =
account.44.sip_server.1.failback_subscribe.enable =
account.44.sip_server.1.invite_retry_counts =
account.44.sip_server.1.only_signal_with_registered =
account.44.sip_server.2.failback_mode = account.44.sip_server.2.failback_timeout = account.44.sip_server.2.register_on_enable = account.44.sip_server.2.failback_subscribe.enable = account.44.sip_server.2.invite_retry_counts = account.44.sip_server.2.only_signal_with_registered =
account.44.naptr_build = account.44.fallback.redundancy_type = account.44.fallback.timeout =
account.44.dns_cache_type = account.44.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 258 OF 1142
account.44.anonymous_call = account.44.reject_anonymous_call = account.44.send_anonymous_code = account.44.anonymous_call_oncode = account.44.anonymous_call_offcode = account.44.send_anonymous_rejection_code = account.44.anonymous_reject_oncode = account.44.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.44.codec.g722.enable =
account.44.codec.g722.priority =
account.44.codec.g729.enable = account.44.codec.g729.priority =
account.44.codec.g726_16.enable = account.44.codec.g726_16.priority =
account.44.codec.g726_24.enable = account.44.codec.g726_24.priority =
account.44.codec.g726_32.enable = account.44.codec.g726_32.priority =
account.44.codec.g726_40.enable = account.44.codec.g726_40.priority =
account.44.codec.ilbc.enable = account.44.codec.ilbc.priority =
account.44.codec.pcmu.enable = account.44.codec.pcmu.priority =
account.44.codec.pcma.enable = account.44.codec.pcma.priority =
account.44.codec.opus.enable = account.44.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.44.nat.nat_traversal = account.44.nat.udp_update_enable = account.44.nat.udp_update_time = account.44.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 259 OF 1142
########################################################################## #############
account.44.blf.subscribe_period = account.44.dtmf.type = account.44.dtmf.dtmf_payload = account.44.dtmf.info_type = account.44.100rel_enable = account.44.subscribe_register = account.44.subscribe_mwi = account.44.subscribe_mwi_expires = account.44.subscribe_mwi_to_vm = voice_mail.number.44 = %BWVOICE-PORTAL-NUMBER-44% account.44.display_mwi.enable = account.44.cid_source = account.44.cid_source_privacy = account.44.cid_source_ppi = account.44.session_timer.enable = account.44.session_timer.expires = account.44.session_timer.refresher = account.44.enable_user_equal_phone = account.44.srtp_encryption = account.44.ptime = account.44.shared_line = %BWSHAREDLINE-BINARY-44% account.44.register_mac = account.44.register_line = account.44.reg_fail_retry_interval = account.44.reg_failed_retry_min_time = account.44.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.44.conf_type =
account.44.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-44%
account.44.sip_server_type = account.44.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.44.register_expires_overlap = account.44.subscribe_expires_overlap = account.44.auto_dial_enable = account.44.auto_dial_num = account.44.cp_source = account.44.transfer_refer_to_contact_header.enable = #V80 Add account.44.custom_ua = account.44.callpark_enable = account.44.check_cseq.enable = account.44.check_to_tag.enable = account.44.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 260 OF 1142
account.44.line_seize.expires = account.44.update_ack_while_dialing = account.44.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.44.always_fwd.enable =
account.44.always_fwd.target =
account.44.always_fwd.off_code =
account.44.always_fwd.on_code =
account.44.busy_fwd.enable =
account.44.busy_fwd.target =
account.44.busy_fwd.off_code =
account.44.busy_fwd.on_code =
account.44.timeout_fwd.enable =
account.44.timeout_fwd.target =
account.44.timeout_fwd.timeout =
account.44.timeout_fwd.off_code =
account.44.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.44.dnd.enable =
account.44.dnd.on_code =
account.44.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.44.reg.enable =
handset.44.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.44.xsi.user =%BWLOGIN-ID-44% account.44.xsi.password =%XSIPASSWORD-44% account.44.xsi.host =%XSP_ADDRESS% account.44.xsi.server_type = account.44.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 261 OF 1142
########################################################################## ############# handset.44.ldap.enable = handset.44.ldap.name_filter= handset.44.ldap.number_filter= handset.44.ldap.host= handset.44.ldap.port= handset.44.ldap.base= handset.44.ldap.user= handset.44.ldap.password= handset.44.ldap.max_hits= handset.44.ldap.name_attr= handset.44.ldap.numb_attr= handset.44.ldap.display_name= handset.44.ldap.version= handset.44.ldap.call_in_lookup= handset.44.ldap.ldap_sort= handset.44.ldap.tls_mode= handset.44.ldap.call_out_lookup= handset.44.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account45 Settings
##
##########################################################################
#############
account.45.enable=%BWLINE-BINARY-45% account.45.label=%BWEXTENSION-45% account.45.display_name=%BWCLID-45% account.45.auth_name=%BWAUTHUSER-45% account.45.user_name=%BWLINEPORT-45% account.45.password=%BWAUTHPASSWORD-45%
#W80B ADD account.45.sip_server.template = account.45.media_transmit.enable =
account.45.alarm.template = account.45.alarm.server = account.45.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.45.sip_server.1.failback_mode =
account.45.sip_server.1.failback_timeout =
account.45.sip_server.1.register_on_enable =
account.45.sip_server.1.failback_subscribe.enable =
account.45.sip_server.1.invite_retry_counts =
account.45.sip_server.1.only_signal_with_registered =
account.45.sip_server.2.failback_mode = account.45.sip_server.2.failback_timeout = account.45.sip_server.2.register_on_enable = account.45.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 262 OF 1142
account.45.sip_server.2.invite_retry_counts = account.45.sip_server.2.only_signal_with_registered =
account.45.naptr_build = account.45.fallback.redundancy_type = account.45.fallback.timeout =
account.45.dns_cache_type = account.45.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.45.anonymous_call =
account.45.reject_anonymous_call =
account.45.send_anonymous_code =
account.45.anonymous_call_oncode =
account.45.anonymous_call_offcode =
account.45.send_anonymous_rejection_code =
account.45.anonymous_reject_oncode =
account.45.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.45.codec.g722.enable =
account.45.codec.g722.priority =
account.45.codec.g729.enable = account.45.codec.g729.priority =
account.45.codec.g726_16.enable = account.45.codec.g726_16.priority =
account.45.codec.g726_24.enable = account.45.codec.g726_24.priority =
account.45.codec.g726_32.enable = account.45.codec.g726_32.priority =
account.45.codec.g726_40.enable = account.45.codec.g726_40.priority =
account.45.codec.ilbc.enable = account.45.codec.ilbc.priority =
account.45.codec.pcmu.enable = account.45.codec.pcmu.priority =
account.45.codec.pcma.enable = account.45.codec.pcma.priority =
account.45.codec.opus.enable = account.45.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 263 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.45.nat.nat_traversal = account.45.nat.udp_update_enable = account.45.nat.udp_update_time = account.45.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.45.blf.subscribe_period = account.45.dtmf.type = account.45.dtmf.dtmf_payload = account.45.dtmf.info_type = account.45.100rel_enable = account.45.subscribe_register = account.45.subscribe_mwi = account.45.subscribe_mwi_expires = account.45.subscribe_mwi_to_vm = voice_mail.number.45 = %BWVOICE-PORTAL-NUMBER-45% account.45.display_mwi.enable = account.45.cid_source = account.45.cid_source_privacy = account.45.cid_source_ppi = account.45.session_timer.enable = account.45.session_timer.expires = account.45.session_timer.refresher = account.45.enable_user_equal_phone = account.45.srtp_encryption = account.45.ptime = account.45.shared_line = %BWSHAREDLINE-BINARY-45% account.45.register_mac = account.45.register_line = account.45.reg_fail_retry_interval = account.45.reg_failed_retry_min_time = account.45.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.45.conf_type =
account.45.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-45%
account.45.sip_server_type = account.45.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 264 OF 1142
########################################################################## ############# ##DECT V81 Add
account.45.register_expires_overlap = account.45.subscribe_expires_overlap = account.45.auto_dial_enable = account.45.auto_dial_num = account.45.cp_source = account.45.transfer_refer_to_contact_header.enable = #V80 Add account.45.custom_ua = account.45.callpark_enable = account.45.check_cseq.enable = account.45.check_to_tag.enable = account.45.hold_use_inactive = account.45.line_seize.expires = account.45.update_ack_while_dialing = account.45.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.45.always_fwd.enable =
account.45.always_fwd.target =
account.45.always_fwd.off_code =
account.45.always_fwd.on_code =
account.45.busy_fwd.enable =
account.45.busy_fwd.target =
account.45.busy_fwd.off_code =
account.45.busy_fwd.on_code =
account.45.timeout_fwd.enable =
account.45.timeout_fwd.target =
account.45.timeout_fwd.timeout =
account.45.timeout_fwd.off_code =
account.45.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.45.dnd.enable =
account.45.dnd.on_code =
account.45.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.45.reg.enable =
handset.45.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 265 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.45.xsi.user =%BWLOGIN-ID-45% account.45.xsi.password =%XSIPASSWORD-45% account.45.xsi.host =%XSP_ADDRESS% account.45.xsi.server_type = account.45.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.45.ldap.enable =
handset.45.ldap.name_filter=
handset.45.ldap.number_filter=
handset.45.ldap.host=
handset.45.ldap.port=
handset.45.ldap.base=
handset.45.ldap.user=
handset.45.ldap.password=
handset.45.ldap.max_hits=
handset.45.ldap.name_attr=
handset.45.ldap.numb_attr=
handset.45.ldap.display_name=
handset.45.ldap.version=
handset.45.ldap.call_in_lookup=
handset.45.ldap.ldap_sort=
handset.45.ldap.tls_mode=
handset.45.ldap.call_out_lookup=
handset.45.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account46 Settings
##
##########################################################################
#############
account.46.enable=%BWLINE-BINARY-46% account.46.label=%BWEXTENSION-46% account.46.display_name=%BWCLID-46% account.46.auth_name=%BWAUTHUSER-46% account.46.user_name=%BWLINEPORT-46% account.46.password=%BWAUTHPASSWORD-46%
#W80B ADD account.46.sip_server.template = account.46.media_transmit.enable =
account.46.alarm.template = account.46.alarm.server = account.46.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 266 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.46.sip_server.1.failback_mode =
account.46.sip_server.1.failback_timeout =
account.46.sip_server.1.register_on_enable =
account.46.sip_server.1.failback_subscribe.enable =
account.46.sip_server.1.invite_retry_counts =
account.46.sip_server.1.only_signal_with_registered =
account.46.sip_server.2.failback_mode = account.46.sip_server.2.failback_timeout = account.46.sip_server.2.register_on_enable = account.46.sip_server.2.failback_subscribe.enable = account.46.sip_server.2.invite_retry_counts = account.46.sip_server.2.only_signal_with_registered =
account.46.naptr_build = account.46.fallback.redundancy_type = account.46.fallback.timeout =
account.46.dns_cache_type = account.46.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.46.anonymous_call =
account.46.reject_anonymous_call =
account.46.send_anonymous_code =
account.46.anonymous_call_oncode =
account.46.anonymous_call_offcode =
account.46.send_anonymous_rejection_code =
account.46.anonymous_reject_oncode =
account.46.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.46.codec.g722.enable =
account.46.codec.g722.priority =
account.46.codec.g729.enable = account.46.codec.g729.priority =
account.46.codec.g726_16.enable = account.46.codec.g726_16.priority =
account.46.codec.g726_24.enable = account.46.codec.g726_24.priority =
account.46.codec.g726_32.enable = account.46.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 267 OF 1142
account.46.codec.g726_40.enable = account.46.codec.g726_40.priority =
account.46.codec.ilbc.enable = account.46.codec.ilbc.priority =
account.46.codec.pcmu.enable = account.46.codec.pcmu.priority =
account.46.codec.pcma.enable = account.46.codec.pcma.priority =
account.46.codec.opus.enable = account.46.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.46.nat.nat_traversal = account.46.nat.udp_update_enable = account.46.nat.udp_update_time = account.46.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.46.blf.subscribe_period = account.46.dtmf.type = account.46.dtmf.dtmf_payload = account.46.dtmf.info_type = account.46.100rel_enable = account.46.subscribe_register = account.46.subscribe_mwi = account.46.subscribe_mwi_expires = account.46.subscribe_mwi_to_vm = voice_mail.number.46 = %BWVOICE-PORTAL-NUMBER-46% account.46.display_mwi.enable = account.46.cid_source = account.46.cid_source_privacy = account.46.cid_source_ppi = account.46.session_timer.enable = account.46.session_timer.expires = account.46.session_timer.refresher = account.46.enable_user_equal_phone = account.46.srtp_encryption = account.46.ptime = account.46.shared_line = %BWSHAREDLINE-BINARY-46% account.46.register_mac = account.46.register_line = account.46.reg_fail_retry_interval = account.46.reg_failed_retry_min_time = account.46.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 268 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.46.conf_type =
account.46.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-46%
account.46.sip_server_type = account.46.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.46.register_expires_overlap = account.46.subscribe_expires_overlap = account.46.auto_dial_enable = account.46.auto_dial_num = account.46.cp_source = account.46.transfer_refer_to_contact_header.enable = #V80 Add account.46.custom_ua = account.46.callpark_enable = account.46.check_cseq.enable = account.46.check_to_tag.enable = account.46.hold_use_inactive = account.46.line_seize.expires = account.46.update_ack_while_dialing = account.46.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.46.always_fwd.enable =
account.46.always_fwd.target =
account.46.always_fwd.off_code =
account.46.always_fwd.on_code =
account.46.busy_fwd.enable =
account.46.busy_fwd.target =
account.46.busy_fwd.off_code =
account.46.busy_fwd.on_code =
account.46.timeout_fwd.enable =
account.46.timeout_fwd.target =
account.46.timeout_fwd.timeout =
account.46.timeout_fwd.off_code =
account.46.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 269 OF 1142
account.46.dnd.enable = account.46.dnd.on_code = account.46.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.46.reg.enable =
handset.46.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.46.xsi.user =%BWLOGIN-ID-46% account.46.xsi.password =%XSIPASSWORD-46% account.46.xsi.host =%XSP_ADDRESS% account.46.xsi.server_type = account.46.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.46.ldap.enable =
handset.46.ldap.name_filter=
handset.46.ldap.number_filter=
handset.46.ldap.host=
handset.46.ldap.port=
handset.46.ldap.base=
handset.46.ldap.user=
handset.46.ldap.password=
handset.46.ldap.max_hits=
handset.46.ldap.name_attr=
handset.46.ldap.numb_attr=
handset.46.ldap.display_name=
handset.46.ldap.version=
handset.46.ldap.call_in_lookup=
handset.46.ldap.ldap_sort=
handset.46.ldap.tls_mode=
handset.46.ldap.call_out_lookup=
handset.46.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account47 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 270 OF 1142
account.47.enable=%BWLINE-BINARY-47% account.47.label=%BWEXTENSION-47% account.47.display_name=%BWCLID-47% account.47.auth_name=%BWAUTHUSER-47% account.47.user_name=%BWLINEPORT-47% account.47.password=%BWAUTHPASSWORD-47%
#W80B ADD account.47.sip_server.template = account.47.media_transmit.enable =
account.47.alarm.template = account.47.alarm.server = account.47.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.47.sip_server.1.failback_mode =
account.47.sip_server.1.failback_timeout =
account.47.sip_server.1.register_on_enable =
account.47.sip_server.1.failback_subscribe.enable =
account.47.sip_server.1.invite_retry_counts =
account.47.sip_server.1.only_signal_with_registered =
account.47.sip_server.2.failback_mode = account.47.sip_server.2.failback_timeout = account.47.sip_server.2.register_on_enable = account.47.sip_server.2.failback_subscribe.enable = account.47.sip_server.2.invite_retry_counts = account.47.sip_server.2.only_signal_with_registered =
account.47.naptr_build = account.47.fallback.redundancy_type = account.47.fallback.timeout =
account.47.dns_cache_type = account.47.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.47.anonymous_call =
account.47.reject_anonymous_call =
account.47.send_anonymous_code =
account.47.anonymous_call_oncode =
account.47.anonymous_call_offcode =
account.47.send_anonymous_rejection_code =
account.47.anonymous_reject_oncode =
account.47.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 271 OF 1142
########################################################################## ############# account.47.codec.g722.enable = account.47.codec.g722.priority =
account.47.codec.g729.enable = account.47.codec.g729.priority =
account.47.codec.g726_16.enable = account.47.codec.g726_16.priority =
account.47.codec.g726_24.enable = account.47.codec.g726_24.priority =
account.47.codec.g726_32.enable = account.47.codec.g726_32.priority =
account.47.codec.g726_40.enable = account.47.codec.g726_40.priority =
account.47.codec.ilbc.enable = account.47.codec.ilbc.priority =
account.47.codec.pcmu.enable = account.47.codec.pcmu.priority =
account.47.codec.pcma.enable = account.47.codec.pcma.priority =
account.47.codec.opus.enable = account.47.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.47.nat.nat_traversal = account.47.nat.udp_update_enable = account.47.nat.udp_update_time = account.47.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.47.blf.subscribe_period = account.47.dtmf.type = account.47.dtmf.dtmf_payload = account.47.dtmf.info_type = account.47.100rel_enable = account.47.subscribe_register = account.47.subscribe_mwi = account.47.subscribe_mwi_expires = account.47.subscribe_mwi_to_vm = voice_mail.number.47 = %BWVOICE-PORTAL-NUMBER-47% account.47.display_mwi.enable = account.47.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 272 OF 1142
account.47.cid_source_privacy = account.47.cid_source_ppi = account.47.session_timer.enable = account.47.session_timer.expires = account.47.session_timer.refresher = account.47.enable_user_equal_phone = account.47.srtp_encryption = account.47.ptime = account.47.shared_line = %BWSHAREDLINE-BINARY-47% account.47.register_mac = account.47.register_line = account.47.reg_fail_retry_interval = account.47.reg_failed_retry_min_time = account.47.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.47.conf_type =
account.47.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-47%
account.47.sip_server_type = account.47.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.47.register_expires_overlap = account.47.subscribe_expires_overlap = account.47.auto_dial_enable = account.47.auto_dial_num = account.47.cp_source = account.47.transfer_refer_to_contact_header.enable = #V80 Add account.47.custom_ua = account.47.callpark_enable = account.47.check_cseq.enable = account.47.check_to_tag.enable = account.47.hold_use_inactive = account.47.line_seize.expires = account.47.update_ack_while_dialing = account.47.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.47.always_fwd.enable =
account.47.always_fwd.target =
account.47.always_fwd.off_code =
account.47.always_fwd.on_code =
account.47.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 273 OF 1142
account.47.busy_fwd.target = account.47.busy_fwd.off_code = account.47.busy_fwd.on_code = account.47.timeout_fwd.enable = account.47.timeout_fwd.target = account.47.timeout_fwd.timeout = account.47.timeout_fwd.off_code = account.47.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.47.dnd.enable =
account.47.dnd.on_code =
account.47.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.47.reg.enable =
handset.47.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.47.xsi.user =%BWLOGIN-ID-47% account.47.xsi.password =%XSIPASSWORD-47% account.47.xsi.host =%XSP_ADDRESS% account.47.xsi.server_type = account.47.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.47.ldap.enable =
handset.47.ldap.name_filter=
handset.47.ldap.number_filter=
handset.47.ldap.host=
handset.47.ldap.port=
handset.47.ldap.base=
handset.47.ldap.user=
handset.47.ldap.password=
handset.47.ldap.max_hits=
handset.47.ldap.name_attr=
handset.47.ldap.numb_attr=
handset.47.ldap.display_name=
handset.47.ldap.version=
handset.47.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 274 OF 1142
handset.47.ldap.ldap_sort= handset.47.ldap.tls_mode= handset.47.ldap.call_out_lookup= handset.47.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account48 Settings
##
##########################################################################
#############
account.48.enable=%BWLINE-BINARY-48% account.48.label=%BWEXTENSION-48% account.48.display_name=%BWCLID-48% account.48.auth_name=%BWAUTHUSER-48% account.48.user_name=%BWLINEPORT-48% account.48.password=%BWAUTHPASSWORD-48%
#W80B ADD account.48.sip_server.template = account.48.media_transmit.enable =
account.48.alarm.template = account.48.alarm.server = account.48.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.48.sip_server.1.failback_mode =
account.48.sip_server.1.failback_timeout =
account.48.sip_server.1.register_on_enable =
account.48.sip_server.1.failback_subscribe.enable =
account.48.sip_server.1.invite_retry_counts =
account.48.sip_server.1.only_signal_with_registered =
account.48.sip_server.2.failback_mode = account.48.sip_server.2.failback_timeout = account.48.sip_server.2.register_on_enable = account.48.sip_server.2.failback_subscribe.enable = account.48.sip_server.2.invite_retry_counts = account.48.sip_server.2.only_signal_with_registered =
account.48.naptr_build = account.48.fallback.redundancy_type = account.48.fallback.timeout =
account.48.dns_cache_type = account.48.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 275 OF 1142
account.48.anonymous_call = account.48.reject_anonymous_call = account.48.send_anonymous_code = account.48.anonymous_call_oncode = account.48.anonymous_call_offcode = account.48.send_anonymous_rejection_code = account.48.anonymous_reject_oncode = account.48.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.48.codec.g722.enable =
account.48.codec.g722.priority =
account.48.codec.g729.enable = account.48.codec.g729.priority =
account.48.codec.g726_16.enable = account.48.codec.g726_16.priority =
account.48.codec.g726_24.enable = account.48.codec.g726_24.priority =
account.48.codec.g726_32.enable = account.48.codec.g726_32.priority =
account.48.codec.g726_40.enable = account.48.codec.g726_40.priority =
account.48.codec.ilbc.enable = account.48.codec.ilbc.priority =
account.48.codec.pcmu.enable = account.48.codec.pcmu.priority =
account.48.codec.pcma.enable = account.48.codec.pcma.priority =
account.48.codec.opus.enable = account.48.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.48.nat.nat_traversal = account.48.nat.udp_update_enable = account.48.nat.udp_update_time = account.48.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 276 OF 1142
########################################################################## #############
account.48.blf.subscribe_period = account.48.dtmf.type = account.48.dtmf.dtmf_payload = account.48.dtmf.info_type = account.48.100rel_enable = account.48.subscribe_register = account.48.subscribe_mwi = account.48.subscribe_mwi_expires = account.48.subscribe_mwi_to_vm = voice_mail.number.48 = %BWVOICE-PORTAL-NUMBER-48% account.48.display_mwi.enable = account.48.cid_source = account.48.cid_source_privacy = account.48.cid_source_ppi = account.48.session_timer.enable = account.48.session_timer.expires = account.48.session_timer.refresher = account.48.enable_user_equal_phone = account.48.srtp_encryption = account.48.ptime = account.48.shared_line = %BWSHAREDLINE-BINARY-48% account.48.register_mac = account.48.register_line = account.48.reg_fail_retry_interval = account.48.reg_failed_retry_min_time = account.48.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.48.conf_type =
account.48.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-48%
account.48.sip_server_type = account.48.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.48.register_expires_overlap = account.48.subscribe_expires_overlap = account.48.auto_dial_enable = account.48.auto_dial_num = account.48.cp_source = account.48.transfer_refer_to_contact_header.enable = #V80 Add account.48.custom_ua = account.48.callpark_enable = account.48.check_cseq.enable = account.48.check_to_tag.enable = account.48.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 277 OF 1142
account.48.line_seize.expires = account.48.update_ack_while_dialing = account.48.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.48.always_fwd.enable =
account.48.always_fwd.target =
account.48.always_fwd.off_code =
account.48.always_fwd.on_code =
account.48.busy_fwd.enable =
account.48.busy_fwd.target =
account.48.busy_fwd.off_code =
account.48.busy_fwd.on_code =
account.48.timeout_fwd.enable =
account.48.timeout_fwd.target =
account.48.timeout_fwd.timeout =
account.48.timeout_fwd.off_code =
account.48.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.48.dnd.enable =
account.48.dnd.on_code =
account.48.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.48.reg.enable =
handset.48.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.48.xsi.user =%BWLOGIN-ID-48% account.48.xsi.password =%XSIPASSWORD-48% account.48.xsi.host =%XSP_ADDRESS% account.48.xsi.server_type = account.48.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 278 OF 1142
########################################################################## ############# handset.48.ldap.enable = handset.48.ldap.name_filter= handset.48.ldap.number_filter= handset.48.ldap.host= handset.48.ldap.port= handset.48.ldap.base= handset.48.ldap.user= handset.48.ldap.password= handset.48.ldap.max_hits= handset.48.ldap.name_attr= handset.48.ldap.numb_attr= handset.48.ldap.display_name= handset.48.ldap.version= handset.48.ldap.call_in_lookup= handset.48.ldap.ldap_sort= handset.48.ldap.tls_mode= handset.48.ldap.call_out_lookup= handset.48.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account49 Settings
##
##########################################################################
#############
account.49.enable=%BWLINE-BINARY-49% account.49.label=%BWEXTENSION-49% account.49.display_name=%BWCLID-49% account.49.auth_name=%BWAUTHUSER-49% account.49.user_name=%BWLINEPORT-49% account.49.password=%BWAUTHPASSWORD-49%
#W80B ADD account.49.sip_server.template = account.49.media_transmit.enable =
account.49.alarm.template = account.49.alarm.server = account.49.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.49.sip_server.1.failback_mode =
account.49.sip_server.1.failback_timeout =
account.49.sip_server.1.register_on_enable =
account.49.sip_server.1.failback_subscribe.enable =
account.49.sip_server.1.invite_retry_counts =
account.49.sip_server.1.only_signal_with_registered =
account.49.sip_server.2.failback_mode = account.49.sip_server.2.failback_timeout = account.49.sip_server.2.register_on_enable = account.49.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 279 OF 1142
account.49.sip_server.2.invite_retry_counts = account.49.sip_server.2.only_signal_with_registered =
account.49.naptr_build = account.49.fallback.redundancy_type = account.49.fallback.timeout =
account.49.dns_cache_type = account.49.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.49.anonymous_call =
account.49.reject_anonymous_call =
account.49.send_anonymous_code =
account.49.anonymous_call_oncode =
account.49.anonymous_call_offcode =
account.49.send_anonymous_rejection_code =
account.49.anonymous_reject_oncode =
account.49.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.49.codec.g722.enable =
account.49.codec.g722.priority =
account.49.codec.g729.enable = account.49.codec.g729.priority =
account.49.codec.g726_16.enable = account.49.codec.g726_16.priority =
account.49.codec.g726_24.enable = account.49.codec.g726_24.priority =
account.49.codec.g726_32.enable = account.49.codec.g726_32.priority =
account.49.codec.g726_40.enable = account.49.codec.g726_40.priority =
account.49.codec.ilbc.enable = account.49.codec.ilbc.priority =
account.49.codec.pcmu.enable = account.49.codec.pcmu.priority =
account.49.codec.pcma.enable = account.49.codec.pcma.priority =
account.49.codec.opus.enable = account.49.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 280 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.49.nat.nat_traversal = account.49.nat.udp_update_enable = account.49.nat.udp_update_time = account.49.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.49.blf.subscribe_period = account.49.dtmf.type = account.49.dtmf.dtmf_payload = account.49.dtmf.info_type = account.49.100rel_enable = account.49.subscribe_register = account.49.subscribe_mwi = account.49.subscribe_mwi_expires = account.49.subscribe_mwi_to_vm = voice_mail.number.49 = %BWVOICE-PORTAL-NUMBER-49% account.49.display_mwi.enable = account.49.cid_source = account.49.cid_source_privacy = account.49.cid_source_ppi = account.49.session_timer.enable = account.49.session_timer.expires = account.49.session_timer.refresher = account.49.enable_user_equal_phone = account.49.srtp_encryption = account.49.ptime = account.49.shared_line = %BWSHAREDLINE-BINARY-49% account.49.register_mac = account.49.register_line = account.49.reg_fail_retry_interval = account.49.reg_failed_retry_min_time = account.49.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.49.conf_type =
account.49.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-49%
account.49.sip_server_type = account.49.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 281 OF 1142
########################################################################## ############# ##DECT V81 Add
account.49.register_expires_overlap = account.49.subscribe_expires_overlap = account.49.auto_dial_enable = account.49.auto_dial_num = account.49.cp_source = account.49.transfer_refer_to_contact_header.enable = #V80 Add account.49.custom_ua = account.49.callpark_enable = account.49.check_cseq.enable = account.49.check_to_tag.enable = account.49.hold_use_inactive = account.49.line_seize.expires = account.49.update_ack_while_dialing = account.49.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.49.always_fwd.enable =
account.49.always_fwd.target =
account.49.always_fwd.off_code =
account.49.always_fwd.on_code =
account.49.busy_fwd.enable =
account.49.busy_fwd.target =
account.49.busy_fwd.off_code =
account.49.busy_fwd.on_code =
account.49.timeout_fwd.enable =
account.49.timeout_fwd.target =
account.49.timeout_fwd.timeout =
account.49.timeout_fwd.off_code =
account.49.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.49.dnd.enable =
account.49.dnd.on_code =
account.49.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.49.reg.enable =
handset.49.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 282 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.49.xsi.user =%BWLOGIN-ID-49% account.49.xsi.password =%XSIPASSWORD-49% account.49.xsi.host =%XSP_ADDRESS% account.49.xsi.server_type = account.49.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.49.ldap.enable =
handset.49.ldap.name_filter=
handset.49.ldap.number_filter=
handset.49.ldap.host=
handset.49.ldap.port=
handset.49.ldap.base=
handset.49.ldap.user=
handset.49.ldap.password=
handset.49.ldap.max_hits=
handset.49.ldap.name_attr=
handset.49.ldap.numb_attr=
handset.49.ldap.display_name=
handset.49.ldap.version=
handset.49.ldap.call_in_lookup=
handset.49.ldap.ldap_sort=
handset.49.ldap.tls_mode=
handset.49.ldap.call_out_lookup=
handset.49.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account50 Settings
##
##########################################################################
#############
account.50.enable=%BWLINE-BINARY-50% account.50.label=%BWEXTENSION-50% account.50.display_name=%BWCLID-50% account.50.auth_name=%BWAUTHUSER-50% account.50.user_name=%BWLINEPORT-50% account.50.password=%BWAUTHPASSWORD-50%
#W80B ADD account.50.sip_server.template = account.50.media_transmit.enable =
account.50.alarm.template = account.50.alarm.server = account.50.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 283 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.50.sip_server.1.failback_mode =
account.50.sip_server.1.failback_timeout =
account.50.sip_server.1.register_on_enable =
account.50.sip_server.1.failback_subscribe.enable =
account.50.sip_server.1.invite_retry_counts =
account.50.sip_server.1.only_signal_with_registered =
account.50.sip_server.2.failback_mode = account.50.sip_server.2.failback_timeout = account.50.sip_server.2.register_on_enable = account.50.sip_server.2.failback_subscribe.enable = account.50.sip_server.2.invite_retry_counts = account.50.sip_server.2.only_signal_with_registered =
account.50.naptr_build = account.50.fallback.redundancy_type = account.50.fallback.timeout =
account.50.dns_cache_type = account.50.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.50.anonymous_call =
account.50.reject_anonymous_call =
account.50.send_anonymous_code =
account.50.anonymous_call_oncode =
account.50.anonymous_call_offcode =
account.50.send_anonymous_rejection_code =
account.50.anonymous_reject_oncode =
account.50.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.50.codec.g722.enable =
account.50.codec.g722.priority =
account.50.codec.g729.enable = account.50.codec.g729.priority =
account.50.codec.g726_16.enable = account.50.codec.g726_16.priority =
account.50.codec.g726_24.enable = account.50.codec.g726_24.priority =
account.50.codec.g726_32.enable = account.50.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 284 OF 1142
account.50.codec.g726_40.enable = account.50.codec.g726_40.priority =
account.50.codec.ilbc.enable = account.50.codec.ilbc.priority =
account.50.codec.pcmu.enable = account.50.codec.pcmu.priority =
account.50.codec.pcma.enable = account.50.codec.pcma.priority =
account.50.codec.opus.enable = account.50.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.50.nat.nat_traversal = account.50.nat.udp_update_enable = account.50.nat.udp_update_time = account.50.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.50.blf.subscribe_period = account.50.dtmf.type = account.50.dtmf.dtmf_payload = account.50.dtmf.info_type = account.50.100rel_enable = account.50.subscribe_register = account.50.subscribe_mwi = account.50.subscribe_mwi_expires = account.50.subscribe_mwi_to_vm = voice_mail.number.50 = %BWVOICE-PORTAL-NUMBER-50% account.50.display_mwi.enable = account.50.cid_source = account.50.cid_source_privacy = account.50.cid_source_ppi = account.50.session_timer.enable = account.50.session_timer.expires = account.50.session_timer.refresher = account.50.enable_user_equal_phone = account.50.srtp_encryption = account.50.ptime = account.50.shared_line = %BWSHAREDLINE-BINARY-50% account.50.register_mac = account.50.register_line = account.50.reg_fail_retry_interval = account.50.reg_failed_retry_min_time = account.50.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 285 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.50.conf_type =
account.50.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-50%
account.50.sip_server_type = account.50.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.50.register_expires_overlap = account.50.subscribe_expires_overlap = account.50.auto_dial_enable = account.50.auto_dial_num = account.50.cp_source = account.50.transfer_refer_to_contact_header.enable = #V80 Add account.50.custom_ua = account.50.callpark_enable = account.50.check_cseq.enable = account.50.check_to_tag.enable = account.50.hold_use_inactive = account.50.line_seize.expires = account.50.update_ack_while_dialing = account.50.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.50.always_fwd.enable =
account.50.always_fwd.target =
account.50.always_fwd.off_code =
account.50.always_fwd.on_code =
account.50.busy_fwd.enable =
account.50.busy_fwd.target =
account.50.busy_fwd.off_code =
account.50.busy_fwd.on_code =
account.50.timeout_fwd.enable =
account.50.timeout_fwd.target =
account.50.timeout_fwd.timeout =
account.50.timeout_fwd.off_code =
account.50.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 286 OF 1142
account.50.dnd.enable = account.50.dnd.on_code = account.50.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.50.reg.enable =
handset.50.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.50.xsi.user =%BWLOGIN-ID-50% account.50.xsi.password =%XSIPASSWORD-50% account.50.xsi.host =%XSP_ADDRESS% account.50.xsi.server_type = account.50.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.50.ldap.enable =
handset.50.ldap.name_filter=
handset.50.ldap.number_filter=
handset.50.ldap.host=
handset.50.ldap.port=
handset.50.ldap.base=
handset.50.ldap.user=
handset.50.ldap.password=
handset.50.ldap.max_hits=
handset.50.ldap.name_attr=
handset.50.ldap.numb_attr=
handset.50.ldap.display_name=
handset.50.ldap.version=
handset.50.ldap.call_in_lookup=
handset.50.ldap.ldap_sort=
handset.50.ldap.tls_mode=
handset.50.ldap.call_out_lookup=
handset.50.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account51 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 287 OF 1142
account.51.enable=%BWLINE-BINARY-51% account.51.label=%BWEXTENSION-51% account.51.display_name=%BWCLID-51% account.51.auth_name=%BWAUTHUSER-51% account.51.user_name=%BWLINEPORT-51% account.51.password=%BWAUTHPASSWORD-51%
#W80B ADD account.51.sip_server.template = account.51.media_transmit.enable =
account.51.alarm.template = account.51.alarm.server = account.51.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.51.sip_server.1.failback_mode =
account.51.sip_server.1.failback_timeout =
account.51.sip_server.1.register_on_enable =
account.51.sip_server.1.failback_subscribe.enable =
account.51.sip_server.1.invite_retry_counts =
account.51.sip_server.1.only_signal_with_registered =
account.51.sip_server.2.failback_mode = account.51.sip_server.2.failback_timeout = account.51.sip_server.2.register_on_enable = account.51.sip_server.2.failback_subscribe.enable = account.51.sip_server.2.invite_retry_counts = account.51.sip_server.2.only_signal_with_registered =
account.51.naptr_build = account.51.fallback.redundancy_type = account.51.fallback.timeout =
account.51.dns_cache_type = account.51.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.51.anonymous_call =
account.51.reject_anonymous_call =
account.51.send_anonymous_code =
account.51.anonymous_call_oncode =
account.51.anonymous_call_offcode =
account.51.send_anonymous_rejection_code =
account.51.anonymous_reject_oncode =
account.51.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 288 OF 1142
########################################################################## ############# account.51.codec.g722.enable = account.51.codec.g722.priority =
account.51.codec.g729.enable = account.51.codec.g729.priority =
account.51.codec.g726_16.enable = account.51.codec.g726_16.priority =
account.51.codec.g726_24.enable = account.51.codec.g726_24.priority =
account.51.codec.g726_32.enable = account.51.codec.g726_32.priority =
account.51.codec.g726_40.enable = account.51.codec.g726_40.priority =
account.51.codec.ilbc.enable = account.51.codec.ilbc.priority =
account.51.codec.pcmu.enable = account.51.codec.pcmu.priority =
account.51.codec.pcma.enable = account.51.codec.pcma.priority =
account.51.codec.opus.enable = account.51.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.51.nat.nat_traversal = account.51.nat.udp_update_enable = account.51.nat.udp_update_time = account.51.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.51.blf.subscribe_period = account.51.dtmf.type = account.51.dtmf.dtmf_payload = account.51.dtmf.info_type = account.51.100rel_enable = account.51.subscribe_register = account.51.subscribe_mwi = account.51.subscribe_mwi_expires = account.51.subscribe_mwi_to_vm = voice_mail.number.51 = %BWVOICE-PORTAL-NUMBER-51% account.51.display_mwi.enable = account.51.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 289 OF 1142
account.51.cid_source_privacy = account.51.cid_source_ppi = account.51.session_timer.enable = account.51.session_timer.expires = account.51.session_timer.refresher = account.51.enable_user_equal_phone = account.51.srtp_encryption = account.51.ptime = account.51.shared_line = %BWSHAREDLINE-BINARY-51% account.51.register_mac = account.51.register_line = account.51.reg_fail_retry_interval = account.51.reg_failed_retry_min_time = account.51.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.51.conf_type =
account.51.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-51%
account.51.sip_server_type = account.51.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.51.register_expires_overlap = account.51.subscribe_expires_overlap = account.51.auto_dial_enable = account.51.auto_dial_num = account.51.cp_source = account.51.transfer_refer_to_contact_header.enable = #V80 Add account.51.custom_ua = account.51.callpark_enable = account.51.check_cseq.enable = account.51.check_to_tag.enable = account.51.hold_use_inactive = account.51.line_seize.expires = account.51.update_ack_while_dialing = account.51.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.51.always_fwd.enable =
account.51.always_fwd.target =
account.51.always_fwd.off_code =
account.51.always_fwd.on_code =
account.51.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 290 OF 1142
account.51.busy_fwd.target = account.51.busy_fwd.off_code = account.51.busy_fwd.on_code = account.51.timeout_fwd.enable = account.51.timeout_fwd.target = account.51.timeout_fwd.timeout = account.51.timeout_fwd.off_code = account.51.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.51.dnd.enable =
account.51.dnd.on_code =
account.51.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.51.reg.enable =
handset.51.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.51.xsi.user =%BWLOGIN-ID-51% account.51.xsi.password =%XSIPASSWORD-51% account.51.xsi.host =%XSP_ADDRESS% account.51.xsi.server_type = account.51.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.51.ldap.enable =
handset.51.ldap.name_filter=
handset.51.ldap.number_filter=
handset.51.ldap.host=
handset.51.ldap.port=
handset.51.ldap.base=
handset.51.ldap.user=
handset.51.ldap.password=
handset.51.ldap.max_hits=
handset.51.ldap.name_attr=
handset.51.ldap.numb_attr=
handset.51.ldap.display_name=
handset.51.ldap.version=
handset.51.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 291 OF 1142
handset.51.ldap.ldap_sort= handset.51.ldap.tls_mode= handset.51.ldap.call_out_lookup= handset.51.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account52 Settings
##
##########################################################################
#############
account.52.enable=%BWLINE-BINARY-52% account.52.label=%BWEXTENSION-52% account.52.display_name=%BWCLID-52% account.52.auth_name=%BWAUTHUSER-52% account.52.user_name=%BWLINEPORT-52% account.52.password=%BWAUTHPASSWORD-52%
#W80B ADD account.52.sip_server.template = account.52.media_transmit.enable =
account.52.alarm.template = account.52.alarm.server = account.52.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.52.sip_server.1.failback_mode =
account.52.sip_server.1.failback_timeout =
account.52.sip_server.1.register_on_enable =
account.52.sip_server.1.failback_subscribe.enable =
account.52.sip_server.1.invite_retry_counts =
account.52.sip_server.1.only_signal_with_registered =
account.52.sip_server.2.failback_mode = account.52.sip_server.2.failback_timeout = account.52.sip_server.2.register_on_enable = account.52.sip_server.2.failback_subscribe.enable = account.52.sip_server.2.invite_retry_counts = account.52.sip_server.2.only_signal_with_registered =
account.52.naptr_build = account.52.fallback.redundancy_type = account.52.fallback.timeout =
account.52.dns_cache_type = account.52.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 292 OF 1142
account.52.anonymous_call = account.52.reject_anonymous_call = account.52.send_anonymous_code = account.52.anonymous_call_oncode = account.52.anonymous_call_offcode = account.52.send_anonymous_rejection_code = account.52.anonymous_reject_oncode = account.52.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.52.codec.g722.enable =
account.52.codec.g722.priority =
account.52.codec.g729.enable = account.52.codec.g729.priority =
account.52.codec.g726_16.enable = account.52.codec.g726_16.priority =
account.52.codec.g726_24.enable = account.52.codec.g726_24.priority =
account.52.codec.g726_32.enable = account.52.codec.g726_32.priority =
account.52.codec.g726_40.enable = account.52.codec.g726_40.priority =
account.52.codec.ilbc.enable = account.52.codec.ilbc.priority =
account.52.codec.pcmu.enable = account.52.codec.pcmu.priority =
account.52.codec.pcma.enable = account.52.codec.pcma.priority =
account.52.codec.opus.enable = account.52.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.52.nat.nat_traversal = account.52.nat.udp_update_enable = account.52.nat.udp_update_time = account.52.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 293 OF 1142
########################################################################## #############
account.52.blf.subscribe_period = account.52.dtmf.type = account.52.dtmf.dtmf_payload = account.52.dtmf.info_type = account.52.100rel_enable = account.52.subscribe_register = account.52.subscribe_mwi = account.52.subscribe_mwi_expires = account.52.subscribe_mwi_to_vm = voice_mail.number.52 = %BWVOICE-PORTAL-NUMBER-52% account.52.display_mwi.enable = account.52.cid_source = account.52.cid_source_privacy = account.52.cid_source_ppi = account.52.session_timer.enable = account.52.session_timer.expires = account.52.session_timer.refresher = account.52.enable_user_equal_phone = account.52.srtp_encryption = account.52.ptime = account.52.shared_line = %BWSHAREDLINE-BINARY-52% account.52.register_mac = account.52.register_line = account.52.reg_fail_retry_interval = account.52.reg_failed_retry_min_time = account.52.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.52.conf_type =
account.52.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-52%
account.52.sip_server_type = account.52.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.52.register_expires_overlap = account.52.subscribe_expires_overlap = account.52.auto_dial_enable = account.52.auto_dial_num = account.52.cp_source = account.52.transfer_refer_to_contact_header.enable = #V80 Add account.52.custom_ua = account.52.callpark_enable = account.52.check_cseq.enable = account.52.check_to_tag.enable = account.52.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 294 OF 1142
account.52.line_seize.expires = account.52.update_ack_while_dialing = account.52.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.52.always_fwd.enable =
account.52.always_fwd.target =
account.52.always_fwd.off_code =
account.52.always_fwd.on_code =
account.52.busy_fwd.enable =
account.52.busy_fwd.target =
account.52.busy_fwd.off_code =
account.52.busy_fwd.on_code =
account.52.timeout_fwd.enable =
account.52.timeout_fwd.target =
account.52.timeout_fwd.timeout =
account.52.timeout_fwd.off_code =
account.52.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.52.dnd.enable =
account.52.dnd.on_code =
account.52.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.52.reg.enable =
handset.52.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.52.xsi.user =%BWLOGIN-ID-52% account.52.xsi.password =%XSIPASSWORD-52% account.52.xsi.host =%XSP_ADDRESS% account.52.xsi.server_type = account.52.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 295 OF 1142
########################################################################## ############# handset.52.ldap.enable = handset.52.ldap.name_filter= handset.52.ldap.number_filter= handset.52.ldap.host= handset.52.ldap.port= handset.52.ldap.base= handset.52.ldap.user= handset.52.ldap.password= handset.52.ldap.max_hits= handset.52.ldap.name_attr= handset.52.ldap.numb_attr= handset.52.ldap.display_name= handset.52.ldap.version= handset.52.ldap.call_in_lookup= handset.52.ldap.ldap_sort= handset.52.ldap.tls_mode= handset.52.ldap.call_out_lookup= handset.52.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account53 Settings
##
##########################################################################
#############
account.53.enable=%BWLINE-BINARY-53% account.53.label=%BWEXTENSION-53% account.53.display_name=%BWCLID-53% account.53.auth_name=%BWAUTHUSER-53% account.53.user_name=%BWLINEPORT-53% account.53.password=%BWAUTHPASSWORD-53%
#W80B ADD account.53.sip_server.template = account.53.media_transmit.enable =
account.53.alarm.template = account.53.alarm.server = account.53.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.53.sip_server.1.failback_mode =
account.53.sip_server.1.failback_timeout =
account.53.sip_server.1.register_on_enable =
account.53.sip_server.1.failback_subscribe.enable =
account.53.sip_server.1.invite_retry_counts =
account.53.sip_server.1.only_signal_with_registered =
account.53.sip_server.2.failback_mode = account.53.sip_server.2.failback_timeout = account.53.sip_server.2.register_on_enable = account.53.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 296 OF 1142
account.53.sip_server.2.invite_retry_counts = account.53.sip_server.2.only_signal_with_registered =
account.53.naptr_build = account.53.fallback.redundancy_type = account.53.fallback.timeout =
account.53.dns_cache_type = account.53.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.53.anonymous_call =
account.53.reject_anonymous_call =
account.53.send_anonymous_code =
account.53.anonymous_call_oncode =
account.53.anonymous_call_offcode =
account.53.send_anonymous_rejection_code =
account.53.anonymous_reject_oncode =
account.53.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.53.codec.g722.enable =
account.53.codec.g722.priority =
account.53.codec.g729.enable = account.53.codec.g729.priority =
account.53.codec.g726_16.enable = account.53.codec.g726_16.priority =
account.53.codec.g726_24.enable = account.53.codec.g726_24.priority =
account.53.codec.g726_32.enable = account.53.codec.g726_32.priority =
account.53.codec.g726_40.enable = account.53.codec.g726_40.priority =
account.53.codec.ilbc.enable = account.53.codec.ilbc.priority =
account.53.codec.pcmu.enable = account.53.codec.pcmu.priority =
account.53.codec.pcma.enable = account.53.codec.pcma.priority =
account.53.codec.opus.enable = account.53.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 297 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.53.nat.nat_traversal = account.53.nat.udp_update_enable = account.53.nat.udp_update_time = account.53.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.53.blf.subscribe_period = account.53.dtmf.type = account.53.dtmf.dtmf_payload = account.53.dtmf.info_type = account.53.100rel_enable = account.53.subscribe_register = account.53.subscribe_mwi = account.53.subscribe_mwi_expires = account.53.subscribe_mwi_to_vm = voice_mail.number.53 = %BWVOICE-PORTAL-NUMBER-53% account.53.display_mwi.enable = account.53.cid_source = account.53.cid_source_privacy = account.53.cid_source_ppi = account.53.session_timer.enable = account.53.session_timer.expires = account.53.session_timer.refresher = account.53.enable_user_equal_phone = account.53.srtp_encryption = account.53.ptime = account.53.shared_line = %BWSHAREDLINE-BINARY-53% account.53.register_mac = account.53.register_line = account.53.reg_fail_retry_interval = account.53.reg_failed_retry_min_time = account.53.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.53.conf_type =
account.53.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-53%
account.53.sip_server_type = account.53.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 298 OF 1142
########################################################################## ############# ##DECT V81 Add
account.53.register_expires_overlap = account.53.subscribe_expires_overlap = account.53.auto_dial_enable = account.53.auto_dial_num = account.53.cp_source = account.53.transfer_refer_to_contact_header.enable = #V80 Add account.53.custom_ua = account.53.callpark_enable = account.53.check_cseq.enable = account.53.check_to_tag.enable = account.53.hold_use_inactive = account.53.line_seize.expires = account.53.update_ack_while_dialing = account.53.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.53.always_fwd.enable =
account.53.always_fwd.target =
account.53.always_fwd.off_code =
account.53.always_fwd.on_code =
account.53.busy_fwd.enable =
account.53.busy_fwd.target =
account.53.busy_fwd.off_code =
account.53.busy_fwd.on_code =
account.53.timeout_fwd.enable =
account.53.timeout_fwd.target =
account.53.timeout_fwd.timeout =
account.53.timeout_fwd.off_code =
account.53.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.53.dnd.enable =
account.53.dnd.on_code =
account.53.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.53.reg.enable =
handset.53.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 299 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.53.xsi.user =%BWLOGIN-ID-53% account.53.xsi.password =%XSIPASSWORD-53% account.53.xsi.host =%XSP_ADDRESS% account.53.xsi.server_type = account.53.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.53.ldap.enable =
handset.53.ldap.name_filter=
handset.53.ldap.number_filter=
handset.53.ldap.host=
handset.53.ldap.port=
handset.53.ldap.base=
handset.53.ldap.user=
handset.53.ldap.password=
handset.53.ldap.max_hits=
handset.53.ldap.name_attr=
handset.53.ldap.numb_attr=
handset.53.ldap.display_name=
handset.53.ldap.version=
handset.53.ldap.call_in_lookup=
handset.53.ldap.ldap_sort=
handset.53.ldap.tls_mode=
handset.53.ldap.call_out_lookup=
handset.53.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account54 Settings
##
##########################################################################
#############
account.54.enable=%BWLINE-BINARY-54% account.54.label=%BWEXTENSION-54% account.54.display_name=%BWCLID-54% account.54.auth_name=%BWAUTHUSER-54% account.54.user_name=%BWLINEPORT-54% account.54.password=%BWAUTHPASSWORD-54%
#W80B ADD account.54.sip_server.template = account.54.media_transmit.enable =
account.54.alarm.template = account.54.alarm.server = account.54.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 300 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.54.sip_server.1.failback_mode =
account.54.sip_server.1.failback_timeout =
account.54.sip_server.1.register_on_enable =
account.54.sip_server.1.failback_subscribe.enable =
account.54.sip_server.1.invite_retry_counts =
account.54.sip_server.1.only_signal_with_registered =
account.54.sip_server.2.failback_mode = account.54.sip_server.2.failback_timeout = account.54.sip_server.2.register_on_enable = account.54.sip_server.2.failback_subscribe.enable = account.54.sip_server.2.invite_retry_counts = account.54.sip_server.2.only_signal_with_registered =
account.54.naptr_build = account.54.fallback.redundancy_type = account.54.fallback.timeout =
account.54.dns_cache_type = account.54.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.54.anonymous_call =
account.54.reject_anonymous_call =
account.54.send_anonymous_code =
account.54.anonymous_call_oncode =
account.54.anonymous_call_offcode =
account.54.send_anonymous_rejection_code =
account.54.anonymous_reject_oncode =
account.54.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.54.codec.g722.enable =
account.54.codec.g722.priority =
account.54.codec.g729.enable = account.54.codec.g729.priority =
account.54.codec.g726_16.enable = account.54.codec.g726_16.priority =
account.54.codec.g726_24.enable = account.54.codec.g726_24.priority =
account.54.codec.g726_32.enable = account.54.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 301 OF 1142
account.54.codec.g726_40.enable = account.54.codec.g726_40.priority =
account.54.codec.ilbc.enable = account.54.codec.ilbc.priority =
account.54.codec.pcmu.enable = account.54.codec.pcmu.priority =
account.54.codec.pcma.enable = account.54.codec.pcma.priority =
account.54.codec.opus.enable = account.54.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.54.nat.nat_traversal = account.54.nat.udp_update_enable = account.54.nat.udp_update_time = account.54.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.54.blf.subscribe_period = account.54.dtmf.type = account.54.dtmf.dtmf_payload = account.54.dtmf.info_type = account.54.100rel_enable = account.54.subscribe_register = account.54.subscribe_mwi = account.54.subscribe_mwi_expires = account.54.subscribe_mwi_to_vm = voice_mail.number.54 = %BWVOICE-PORTAL-NUMBER-54% account.54.display_mwi.enable = account.54.cid_source = account.54.cid_source_privacy = account.54.cid_source_ppi = account.54.session_timer.enable = account.54.session_timer.expires = account.54.session_timer.refresher = account.54.enable_user_equal_phone = account.54.srtp_encryption = account.54.ptime = account.54.shared_line = %BWSHAREDLINE-BINARY-54% account.54.register_mac = account.54.register_line = account.54.reg_fail_retry_interval = account.54.reg_failed_retry_min_time = account.54.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 302 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.54.conf_type =
account.54.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-54%
account.54.sip_server_type = account.54.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.54.register_expires_overlap = account.54.subscribe_expires_overlap = account.54.auto_dial_enable = account.54.auto_dial_num = account.54.cp_source = account.54.transfer_refer_to_contact_header.enable = #V80 Add account.54.custom_ua = account.54.callpark_enable = account.54.check_cseq.enable = account.54.check_to_tag.enable = account.54.hold_use_inactive = account.54.line_seize.expires = account.54.update_ack_while_dialing = account.54.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.54.always_fwd.enable =
account.54.always_fwd.target =
account.54.always_fwd.off_code =
account.54.always_fwd.on_code =
account.54.busy_fwd.enable =
account.54.busy_fwd.target =
account.54.busy_fwd.off_code =
account.54.busy_fwd.on_code =
account.54.timeout_fwd.enable =
account.54.timeout_fwd.target =
account.54.timeout_fwd.timeout =
account.54.timeout_fwd.off_code =
account.54.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 303 OF 1142
account.54.dnd.enable = account.54.dnd.on_code = account.54.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.54.reg.enable =
handset.54.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.54.xsi.user =%BWLOGIN-ID-54% account.54.xsi.password =%XSIPASSWORD-54% account.54.xsi.host =%XSP_ADDRESS% account.54.xsi.server_type = account.54.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.54.ldap.enable =
handset.54.ldap.name_filter=
handset.54.ldap.number_filter=
handset.54.ldap.host=
handset.54.ldap.port=
handset.54.ldap.base=
handset.54.ldap.user=
handset.54.ldap.password=
handset.54.ldap.max_hits=
handset.54.ldap.name_attr=
handset.54.ldap.numb_attr=
handset.54.ldap.display_name=
handset.54.ldap.version=
handset.54.ldap.call_in_lookup=
handset.54.ldap.ldap_sort=
handset.54.ldap.tls_mode=
handset.54.ldap.call_out_lookup=
handset.54.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account55 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 304 OF 1142
account.55.enable=%BWLINE-BINARY-55% account.55.label=%BWEXTENSION-55% account.55.display_name=%BWCLID-55% account.55.auth_name=%BWAUTHUSER-55% account.55.user_name=%BWLINEPORT-55% account.55.password=%BWAUTHPASSWORD-55%
#W80B ADD account.55.sip_server.template = account.55.media_transmit.enable =
account.55.alarm.template = account.55.alarm.server = account.55.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.55.sip_server.1.failback_mode =
account.55.sip_server.1.failback_timeout =
account.55.sip_server.1.register_on_enable =
account.55.sip_server.1.failback_subscribe.enable =
account.55.sip_server.1.invite_retry_counts =
account.55.sip_server.1.only_signal_with_registered =
account.55.sip_server.2.failback_mode = account.55.sip_server.2.failback_timeout = account.55.sip_server.2.register_on_enable = account.55.sip_server.2.failback_subscribe.enable = account.55.sip_server.2.invite_retry_counts = account.55.sip_server.2.only_signal_with_registered =
account.55.naptr_build = account.55.fallback.redundancy_type = account.55.fallback.timeout =
account.55.dns_cache_type = account.55.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.55.anonymous_call =
account.55.reject_anonymous_call =
account.55.send_anonymous_code =
account.55.anonymous_call_oncode =
account.55.anonymous_call_offcode =
account.55.send_anonymous_rejection_code =
account.55.anonymous_reject_oncode =
account.55.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 305 OF 1142
########################################################################## ############# account.55.codec.g722.enable = account.55.codec.g722.priority =
account.55.codec.g729.enable = account.55.codec.g729.priority =
account.55.codec.g726_16.enable = account.55.codec.g726_16.priority =
account.55.codec.g726_24.enable = account.55.codec.g726_24.priority =
account.55.codec.g726_32.enable = account.55.codec.g726_32.priority =
account.55.codec.g726_40.enable = account.55.codec.g726_40.priority =
account.55.codec.ilbc.enable = account.55.codec.ilbc.priority =
account.55.codec.pcmu.enable = account.55.codec.pcmu.priority =
account.55.codec.pcma.enable = account.55.codec.pcma.priority =
account.55.codec.opus.enable = account.55.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.55.nat.nat_traversal = account.55.nat.udp_update_enable = account.55.nat.udp_update_time = account.55.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.55.blf.subscribe_period = account.55.dtmf.type = account.55.dtmf.dtmf_payload = account.55.dtmf.info_type = account.55.100rel_enable = account.55.subscribe_register = account.55.subscribe_mwi = account.55.subscribe_mwi_expires = account.55.subscribe_mwi_to_vm = voice_mail.number.55 = %BWVOICE-PORTAL-NUMBER-55% account.55.display_mwi.enable = account.55.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 306 OF 1142
account.55.cid_source_privacy = account.55.cid_source_ppi = account.55.session_timer.enable = account.55.session_timer.expires = account.55.session_timer.refresher = account.55.enable_user_equal_phone = account.55.srtp_encryption = account.55.ptime = account.55.shared_line = %BWSHAREDLINE-BINARY-55% account.55.register_mac = account.55.register_line = account.55.reg_fail_retry_interval = account.55.reg_failed_retry_min_time = account.55.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.55.conf_type =
account.55.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-55%
account.55.sip_server_type = account.55.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.55.register_expires_overlap = account.55.subscribe_expires_overlap = account.55.auto_dial_enable = account.55.auto_dial_num = account.55.cp_source = account.55.transfer_refer_to_contact_header.enable = #V80 Add account.55.custom_ua = account.55.callpark_enable = account.55.check_cseq.enable = account.55.check_to_tag.enable = account.55.hold_use_inactive = account.55.line_seize.expires = account.55.update_ack_while_dialing = account.55.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.55.always_fwd.enable =
account.55.always_fwd.target =
account.55.always_fwd.off_code =
account.55.always_fwd.on_code =
account.55.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 307 OF 1142
account.55.busy_fwd.target = account.55.busy_fwd.off_code = account.55.busy_fwd.on_code = account.55.timeout_fwd.enable = account.55.timeout_fwd.target = account.55.timeout_fwd.timeout = account.55.timeout_fwd.off_code = account.55.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.55.dnd.enable =
account.55.dnd.on_code =
account.55.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.55.reg.enable =
handset.55.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.55.xsi.user =%BWLOGIN-ID-55% account.55.xsi.password =%XSIPASSWORD-55% account.55.xsi.host =%XSP_ADDRESS% account.55.xsi.server_type = account.55.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.55.ldap.enable =
handset.55.ldap.name_filter=
handset.55.ldap.number_filter=
handset.55.ldap.host=
handset.55.ldap.port=
handset.55.ldap.base=
handset.55.ldap.user=
handset.55.ldap.password=
handset.55.ldap.max_hits=
handset.55.ldap.name_attr=
handset.55.ldap.numb_attr=
handset.55.ldap.display_name=
handset.55.ldap.version=
handset.55.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 308 OF 1142
handset.55.ldap.ldap_sort= handset.55.ldap.tls_mode= handset.55.ldap.call_out_lookup= handset.55.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account56 Settings
##
##########################################################################
#############
account.56.enable=%BWLINE-BINARY-56% account.56.label=%BWEXTENSION-56% account.56.display_name=%BWCLID-56% account.56.auth_name=%BWAUTHUSER-56% account.56.user_name=%BWLINEPORT-56% account.56.password=%BWAUTHPASSWORD-56%
#W80B ADD account.56.sip_server.template = account.56.media_transmit.enable =
account.56.alarm.template = account.56.alarm.server = account.56.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.56.sip_server.1.failback_mode =
account.56.sip_server.1.failback_timeout =
account.56.sip_server.1.register_on_enable =
account.56.sip_server.1.failback_subscribe.enable =
account.56.sip_server.1.invite_retry_counts =
account.56.sip_server.1.only_signal_with_registered =
account.56.sip_server.2.failback_mode = account.56.sip_server.2.failback_timeout = account.56.sip_server.2.register_on_enable = account.56.sip_server.2.failback_subscribe.enable = account.56.sip_server.2.invite_retry_counts = account.56.sip_server.2.only_signal_with_registered =
account.56.naptr_build = account.56.fallback.redundancy_type = account.56.fallback.timeout =
account.56.dns_cache_type = account.56.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 309 OF 1142
account.56.anonymous_call = account.56.reject_anonymous_call = account.56.send_anonymous_code = account.56.anonymous_call_oncode = account.56.anonymous_call_offcode = account.56.send_anonymous_rejection_code = account.56.anonymous_reject_oncode = account.56.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.56.codec.g722.enable =
account.56.codec.g722.priority =
account.56.codec.g729.enable = account.56.codec.g729.priority =
account.56.codec.g726_16.enable = account.56.codec.g726_16.priority =
account.56.codec.g726_24.enable = account.56.codec.g726_24.priority =
account.56.codec.g726_32.enable = account.56.codec.g726_32.priority =
account.56.codec.g726_40.enable = account.56.codec.g726_40.priority =
account.56.codec.ilbc.enable = account.56.codec.ilbc.priority =
account.56.codec.pcmu.enable = account.56.codec.pcmu.priority =
account.56.codec.pcma.enable = account.56.codec.pcma.priority =
account.56.codec.opus.enable = account.56.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.56.nat.nat_traversal = account.56.nat.udp_update_enable = account.56.nat.udp_update_time = account.56.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 310 OF 1142
########################################################################## #############
account.56.blf.subscribe_period = account.56.dtmf.type = account.56.dtmf.dtmf_payload = account.56.dtmf.info_type = account.56.100rel_enable = account.56.subscribe_register = account.56.subscribe_mwi = account.56.subscribe_mwi_expires = account.56.subscribe_mwi_to_vm = voice_mail.number.56 = %BWVOICE-PORTAL-NUMBER-56% account.56.display_mwi.enable = account.56.cid_source = account.56.cid_source_privacy = account.56.cid_source_ppi = account.56.session_timer.enable = account.56.session_timer.expires = account.56.session_timer.refresher = account.56.enable_user_equal_phone = account.56.srtp_encryption = account.56.ptime = account.56.shared_line = %BWSHAREDLINE-BINARY-56% account.56.register_mac = account.56.register_line = account.56.reg_fail_retry_interval = account.56.reg_failed_retry_min_time = account.56.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.56.conf_type =
account.56.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-56%
account.56.sip_server_type = account.56.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.56.register_expires_overlap = account.56.subscribe_expires_overlap = account.56.auto_dial_enable = account.56.auto_dial_num = account.56.cp_source = account.56.transfer_refer_to_contact_header.enable = #V80 Add account.56.custom_ua = account.56.callpark_enable = account.56.check_cseq.enable = account.56.check_to_tag.enable = account.56.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 311 OF 1142
account.56.line_seize.expires = account.56.update_ack_while_dialing = account.56.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.56.always_fwd.enable =
account.56.always_fwd.target =
account.56.always_fwd.off_code =
account.56.always_fwd.on_code =
account.56.busy_fwd.enable =
account.56.busy_fwd.target =
account.56.busy_fwd.off_code =
account.56.busy_fwd.on_code =
account.56.timeout_fwd.enable =
account.56.timeout_fwd.target =
account.56.timeout_fwd.timeout =
account.56.timeout_fwd.off_code =
account.56.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.56.dnd.enable =
account.56.dnd.on_code =
account.56.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.56.reg.enable =
handset.56.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.56.xsi.user =%BWLOGIN-ID-56% account.56.xsi.password =%XSIPASSWORD-56% account.56.xsi.host =%XSP_ADDRESS% account.56.xsi.server_type = account.56.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 312 OF 1142
########################################################################## ############# handset.56.ldap.enable = handset.56.ldap.name_filter= handset.56.ldap.number_filter= handset.56.ldap.host= handset.56.ldap.port= handset.56.ldap.base= handset.56.ldap.user= handset.56.ldap.password= handset.56.ldap.max_hits= handset.56.ldap.name_attr= handset.56.ldap.numb_attr= handset.56.ldap.display_name= handset.56.ldap.version= handset.56.ldap.call_in_lookup= handset.56.ldap.ldap_sort= handset.56.ldap.tls_mode= handset.56.ldap.call_out_lookup= handset.56.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account57 Settings
##
##########################################################################
#############
account.57.enable=%BWLINE-BINARY-57% account.57.label=%BWEXTENSION-57% account.57.display_name=%BWCLID-57% account.57.auth_name=%BWAUTHUSER-57% account.57.user_name=%BWLINEPORT-57% account.57.password=%BWAUTHPASSWORD-57%
#W80B ADD account.57.sip_server.template = account.57.media_transmit.enable =
account.57.alarm.template = account.57.alarm.server = account.57.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.57.sip_server.1.failback_mode =
account.57.sip_server.1.failback_timeout =
account.57.sip_server.1.register_on_enable =
account.57.sip_server.1.failback_subscribe.enable =
account.57.sip_server.1.invite_retry_counts =
account.57.sip_server.1.only_signal_with_registered =
account.57.sip_server.2.failback_mode = account.57.sip_server.2.failback_timeout = account.57.sip_server.2.register_on_enable = account.57.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 313 OF 1142
account.57.sip_server.2.invite_retry_counts = account.57.sip_server.2.only_signal_with_registered =
account.57.naptr_build = account.57.fallback.redundancy_type = account.57.fallback.timeout =
account.57.dns_cache_type = account.57.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.57.anonymous_call =
account.57.reject_anonymous_call =
account.57.send_anonymous_code =
account.57.anonymous_call_oncode =
account.57.anonymous_call_offcode =
account.57.send_anonymous_rejection_code =
account.57.anonymous_reject_oncode =
account.57.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.57.codec.g722.enable =
account.57.codec.g722.priority =
account.57.codec.g729.enable = account.57.codec.g729.priority =
account.57.codec.g726_16.enable = account.57.codec.g726_16.priority =
account.57.codec.g726_24.enable = account.57.codec.g726_24.priority =
account.57.codec.g726_32.enable = account.57.codec.g726_32.priority =
account.57.codec.g726_40.enable = account.57.codec.g726_40.priority =
account.57.codec.ilbc.enable = account.57.codec.ilbc.priority =
account.57.codec.pcmu.enable = account.57.codec.pcmu.priority =
account.57.codec.pcma.enable = account.57.codec.pcma.priority =
account.57.codec.opus.enable = account.57.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 314 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.57.nat.nat_traversal = account.57.nat.udp_update_enable = account.57.nat.udp_update_time = account.57.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.57.blf.subscribe_period = account.57.dtmf.type = account.57.dtmf.dtmf_payload = account.57.dtmf.info_type = account.57.100rel_enable = account.57.subscribe_register = account.57.subscribe_mwi = account.57.subscribe_mwi_expires = account.57.subscribe_mwi_to_vm = voice_mail.number.57 = %BWVOICE-PORTAL-NUMBER-57% account.57.display_mwi.enable = account.57.cid_source = account.57.cid_source_privacy = account.57.cid_source_ppi = account.57.session_timer.enable = account.57.session_timer.expires = account.57.session_timer.refresher = account.57.enable_user_equal_phone = account.57.srtp_encryption = account.57.ptime = account.57.shared_line = %BWSHAREDLINE-BINARY-57% account.57.register_mac = account.57.register_line = account.57.reg_fail_retry_interval = account.57.reg_failed_retry_min_time = account.57.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.57.conf_type =
account.57.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-57%
account.57.sip_server_type = account.57.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 315 OF 1142
########################################################################## ############# ##DECT V81 Add
account.57.register_expires_overlap = account.57.subscribe_expires_overlap = account.57.auto_dial_enable = account.57.auto_dial_num = account.57.cp_source = account.57.transfer_refer_to_contact_header.enable = #V80 Add account.57.custom_ua = account.57.callpark_enable = account.57.check_cseq.enable = account.57.check_to_tag.enable = account.57.hold_use_inactive = account.57.line_seize.expires = account.57.update_ack_while_dialing = account.57.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.57.always_fwd.enable =
account.57.always_fwd.target =
account.57.always_fwd.off_code =
account.57.always_fwd.on_code =
account.57.busy_fwd.enable =
account.57.busy_fwd.target =
account.57.busy_fwd.off_code =
account.57.busy_fwd.on_code =
account.57.timeout_fwd.enable =
account.57.timeout_fwd.target =
account.57.timeout_fwd.timeout =
account.57.timeout_fwd.off_code =
account.57.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.57.dnd.enable =
account.57.dnd.on_code =
account.57.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.57.reg.enable =
handset.57.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 316 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.57.xsi.user =%BWLOGIN-ID-57% account.57.xsi.password =%XSIPASSWORD-57% account.57.xsi.host =%XSP_ADDRESS% account.57.xsi.server_type = account.57.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.57.ldap.enable =
handset.57.ldap.name_filter=
handset.57.ldap.number_filter=
handset.57.ldap.host=
handset.57.ldap.port=
handset.57.ldap.base=
handset.57.ldap.user=
handset.57.ldap.password=
handset.57.ldap.max_hits=
handset.57.ldap.name_attr=
handset.57.ldap.numb_attr=
handset.57.ldap.display_name=
handset.57.ldap.version=
handset.57.ldap.call_in_lookup=
handset.57.ldap.ldap_sort=
handset.57.ldap.tls_mode=
handset.57.ldap.call_out_lookup=
handset.57.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account58 Settings
##
##########################################################################
#############
account.58.enable=%BWLINE-BINARY-58% account.58.label=%BWEXTENSION-58% account.58.display_name=%BWCLID-58% account.58.auth_name=%BWAUTHUSER-58% account.58.user_name=%BWLINEPORT-58% account.58.password=%BWAUTHPASSWORD-58%
#W80B ADD account.58.sip_server.template = account.58.media_transmit.enable =
account.58.alarm.template = account.58.alarm.server = account.58.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 317 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.58.sip_server.1.failback_mode =
account.58.sip_server.1.failback_timeout =
account.58.sip_server.1.register_on_enable =
account.58.sip_server.1.failback_subscribe.enable =
account.58.sip_server.1.invite_retry_counts =
account.58.sip_server.1.only_signal_with_registered =
account.58.sip_server.2.failback_mode = account.58.sip_server.2.failback_timeout = account.58.sip_server.2.register_on_enable = account.58.sip_server.2.failback_subscribe.enable = account.58.sip_server.2.invite_retry_counts = account.58.sip_server.2.only_signal_with_registered =
account.58.naptr_build = account.58.fallback.redundancy_type = account.58.fallback.timeout =
account.58.dns_cache_type = account.58.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.58.anonymous_call =
account.58.reject_anonymous_call =
account.58.send_anonymous_code =
account.58.anonymous_call_oncode =
account.58.anonymous_call_offcode =
account.58.send_anonymous_rejection_code =
account.58.anonymous_reject_oncode =
account.58.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.58.codec.g722.enable =
account.58.codec.g722.priority =
account.58.codec.g729.enable = account.58.codec.g729.priority =
account.58.codec.g726_16.enable = account.58.codec.g726_16.priority =
account.58.codec.g726_24.enable = account.58.codec.g726_24.priority =
account.58.codec.g726_32.enable = account.58.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 318 OF 1142
account.58.codec.g726_40.enable = account.58.codec.g726_40.priority =
account.58.codec.ilbc.enable = account.58.codec.ilbc.priority =
account.58.codec.pcmu.enable = account.58.codec.pcmu.priority =
account.58.codec.pcma.enable = account.58.codec.pcma.priority =
account.58.codec.opus.enable = account.58.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.58.nat.nat_traversal = account.58.nat.udp_update_enable = account.58.nat.udp_update_time = account.58.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.58.blf.subscribe_period = account.58.dtmf.type = account.58.dtmf.dtmf_payload = account.58.dtmf.info_type = account.58.100rel_enable = account.58.subscribe_register = account.58.subscribe_mwi = account.58.subscribe_mwi_expires = account.58.subscribe_mwi_to_vm = voice_mail.number.58 = %BWVOICE-PORTAL-NUMBER-58% account.58.display_mwi.enable = account.58.cid_source = account.58.cid_source_privacy = account.58.cid_source_ppi = account.58.session_timer.enable = account.58.session_timer.expires = account.58.session_timer.refresher = account.58.enable_user_equal_phone = account.58.srtp_encryption = account.58.ptime = account.58.shared_line = %BWSHAREDLINE-BINARY-58% account.58.register_mac = account.58.register_line = account.58.reg_fail_retry_interval = account.58.reg_failed_retry_min_time = account.58.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 319 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.58.conf_type =
account.58.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-58%
account.58.sip_server_type = account.58.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.58.register_expires_overlap = account.58.subscribe_expires_overlap = account.58.auto_dial_enable = account.58.auto_dial_num = account.58.cp_source = account.58.transfer_refer_to_contact_header.enable = #V80 Add account.58.custom_ua = account.58.callpark_enable = account.58.check_cseq.enable = account.58.check_to_tag.enable = account.58.hold_use_inactive = account.58.line_seize.expires = account.58.update_ack_while_dialing = account.58.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.58.always_fwd.enable =
account.58.always_fwd.target =
account.58.always_fwd.off_code =
account.58.always_fwd.on_code =
account.58.busy_fwd.enable =
account.58.busy_fwd.target =
account.58.busy_fwd.off_code =
account.58.busy_fwd.on_code =
account.58.timeout_fwd.enable =
account.58.timeout_fwd.target =
account.58.timeout_fwd.timeout =
account.58.timeout_fwd.off_code =
account.58.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 320 OF 1142
account.58.dnd.enable = account.58.dnd.on_code = account.58.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.58.reg.enable =
handset.58.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.58.xsi.user =%BWLOGIN-ID-58% account.58.xsi.password =%XSIPASSWORD-58% account.58.xsi.host =%XSP_ADDRESS% account.58.xsi.server_type = account.58.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.58.ldap.enable =
handset.58.ldap.name_filter=
handset.58.ldap.number_filter=
handset.58.ldap.host=
handset.58.ldap.port=
handset.58.ldap.base=
handset.58.ldap.user=
handset.58.ldap.password=
handset.58.ldap.max_hits=
handset.58.ldap.name_attr=
handset.58.ldap.numb_attr=
handset.58.ldap.display_name=
handset.58.ldap.version=
handset.58.ldap.call_in_lookup=
handset.58.ldap.ldap_sort=
handset.58.ldap.tls_mode=
handset.58.ldap.call_out_lookup=
handset.58.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account59 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 321 OF 1142
account.59.enable=%BWLINE-BINARY-59% account.59.label=%BWEXTENSION-59% account.59.display_name=%BWCLID-59% account.59.auth_name=%BWAUTHUSER-59% account.59.user_name=%BWLINEPORT-59% account.59.password=%BWAUTHPASSWORD-59%
#W80B ADD account.59.sip_server.template = account.59.media_transmit.enable =
account.59.alarm.template = account.59.alarm.server = account.59.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.59.sip_server.1.failback_mode =
account.59.sip_server.1.failback_timeout =
account.59.sip_server.1.register_on_enable =
account.59.sip_server.1.failback_subscribe.enable =
account.59.sip_server.1.invite_retry_counts =
account.59.sip_server.1.only_signal_with_registered =
account.59.sip_server.2.failback_mode = account.59.sip_server.2.failback_timeout = account.59.sip_server.2.register_on_enable = account.59.sip_server.2.failback_subscribe.enable = account.59.sip_server.2.invite_retry_counts = account.59.sip_server.2.only_signal_with_registered =
account.59.naptr_build = account.59.fallback.redundancy_type = account.59.fallback.timeout =
account.59.dns_cache_type = account.59.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.59.anonymous_call =
account.59.reject_anonymous_call =
account.59.send_anonymous_code =
account.59.anonymous_call_oncode =
account.59.anonymous_call_offcode =
account.59.send_anonymous_rejection_code =
account.59.anonymous_reject_oncode =
account.59.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 322 OF 1142
########################################################################## ############# account.59.codec.g722.enable = account.59.codec.g722.priority =
account.59.codec.g729.enable = account.59.codec.g729.priority =
account.59.codec.g726_16.enable = account.59.codec.g726_16.priority =
account.59.codec.g726_24.enable = account.59.codec.g726_24.priority =
account.59.codec.g726_32.enable = account.59.codec.g726_32.priority =
account.59.codec.g726_40.enable = account.59.codec.g726_40.priority =
account.59.codec.ilbc.enable = account.59.codec.ilbc.priority =
account.59.codec.pcmu.enable = account.59.codec.pcmu.priority =
account.59.codec.pcma.enable = account.59.codec.pcma.priority =
account.59.codec.opus.enable = account.59.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.59.nat.nat_traversal = account.59.nat.udp_update_enable = account.59.nat.udp_update_time = account.59.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.59.blf.subscribe_period = account.59.dtmf.type = account.59.dtmf.dtmf_payload = account.59.dtmf.info_type = account.59.100rel_enable = account.59.subscribe_register = account.59.subscribe_mwi = account.59.subscribe_mwi_expires = account.59.subscribe_mwi_to_vm = voice_mail.number.59 = %BWVOICE-PORTAL-NUMBER-59% account.59.display_mwi.enable = account.59.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 323 OF 1142
account.59.cid_source_privacy = account.59.cid_source_ppi = account.59.session_timer.enable = account.59.session_timer.expires = account.59.session_timer.refresher = account.59.enable_user_equal_phone = account.59.srtp_encryption = account.59.ptime = account.59.shared_line = %BWSHAREDLINE-BINARY-59% account.59.register_mac = account.59.register_line = account.59.reg_fail_retry_interval = account.59.reg_failed_retry_min_time = account.59.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.59.conf_type =
account.59.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-59%
account.59.sip_server_type = account.59.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.59.register_expires_overlap = account.59.subscribe_expires_overlap = account.59.auto_dial_enable = account.59.auto_dial_num = account.59.cp_source = account.59.transfer_refer_to_contact_header.enable = #V80 Add account.59.custom_ua = account.59.callpark_enable = account.59.check_cseq.enable = account.59.check_to_tag.enable = account.59.hold_use_inactive = account.59.line_seize.expires = account.59.update_ack_while_dialing = account.59.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.59.always_fwd.enable =
account.59.always_fwd.target =
account.59.always_fwd.off_code =
account.59.always_fwd.on_code =
account.59.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 324 OF 1142
account.59.busy_fwd.target = account.59.busy_fwd.off_code = account.59.busy_fwd.on_code = account.59.timeout_fwd.enable = account.59.timeout_fwd.target = account.59.timeout_fwd.timeout = account.59.timeout_fwd.off_code = account.59.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.59.dnd.enable =
account.59.dnd.on_code =
account.59.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.59.reg.enable =
handset.59.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.59.xsi.user =%BWLOGIN-ID-59% account.59.xsi.password =%XSIPASSWORD-59% account.59.xsi.host =%XSP_ADDRESS% account.59.xsi.server_type = account.59.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.59.ldap.enable =
handset.59.ldap.name_filter=
handset.59.ldap.number_filter=
handset.59.ldap.host=
handset.59.ldap.port=
handset.59.ldap.base=
handset.59.ldap.user=
handset.59.ldap.password=
handset.59.ldap.max_hits=
handset.59.ldap.name_attr=
handset.59.ldap.numb_attr=
handset.59.ldap.display_name=
handset.59.ldap.version=
handset.59.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 325 OF 1142
handset.59.ldap.ldap_sort= handset.59.ldap.tls_mode= handset.59.ldap.call_out_lookup= handset.59.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account60 Settings
##
##########################################################################
#############
account.60.enable=%BWLINE-BINARY-60% account.60.label=%BWEXTENSION-60% account.60.display_name=%BWCLID-60% account.60.auth_name=%BWAUTHUSER-60% account.60.user_name=%BWLINEPORT-60% account.60.password=%BWAUTHPASSWORD-60%
#W80B ADD account.60.sip_server.template = account.60.media_transmit.enable =
account.60.alarm.template = account.60.alarm.server = account.60.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.60.sip_server.1.failback_mode =
account.60.sip_server.1.failback_timeout =
account.60.sip_server.1.register_on_enable =
account.60.sip_server.1.failback_subscribe.enable =
account.60.sip_server.1.invite_retry_counts =
account.60.sip_server.1.only_signal_with_registered =
account.60.sip_server.2.failback_mode = account.60.sip_server.2.failback_timeout = account.60.sip_server.2.register_on_enable = account.60.sip_server.2.failback_subscribe.enable = account.60.sip_server.2.invite_retry_counts = account.60.sip_server.2.only_signal_with_registered =
account.60.naptr_build = account.60.fallback.redundancy_type = account.60.fallback.timeout =
account.60.dns_cache_type = account.60.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 326 OF 1142
account.60.anonymous_call = account.60.reject_anonymous_call = account.60.send_anonymous_code = account.60.anonymous_call_oncode = account.60.anonymous_call_offcode = account.60.send_anonymous_rejection_code = account.60.anonymous_reject_oncode = account.60.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.60.codec.g722.enable =
account.60.codec.g722.priority =
account.60.codec.g729.enable = account.60.codec.g729.priority =
account.60.codec.g726_16.enable = account.60.codec.g726_16.priority =
account.60.codec.g726_24.enable = account.60.codec.g726_24.priority =
account.60.codec.g726_32.enable = account.60.codec.g726_32.priority =
account.60.codec.g726_40.enable = account.60.codec.g726_40.priority =
account.60.codec.ilbc.enable = account.60.codec.ilbc.priority =
account.60.codec.pcmu.enable = account.60.codec.pcmu.priority =
account.60.codec.pcma.enable = account.60.codec.pcma.priority =
account.60.codec.opus.enable = account.60.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.60.nat.nat_traversal = account.60.nat.udp_update_enable = account.60.nat.udp_update_time = account.60.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 327 OF 1142
########################################################################## #############
account.60.blf.subscribe_period = account.60.dtmf.type = account.60.dtmf.dtmf_payload = account.60.dtmf.info_type = account.60.100rel_enable = account.60.subscribe_register = account.60.subscribe_mwi = account.60.subscribe_mwi_expires = account.60.subscribe_mwi_to_vm = voice_mail.number.60 = %BWVOICE-PORTAL-NUMBER-60% account.60.display_mwi.enable = account.60.cid_source = account.60.cid_source_privacy = account.60.cid_source_ppi = account.60.session_timer.enable = account.60.session_timer.expires = account.60.session_timer.refresher = account.60.enable_user_equal_phone = account.60.srtp_encryption = account.60.ptime = account.60.shared_line = %BWSHAREDLINE-BINARY-60% account.60.register_mac = account.60.register_line = account.60.reg_fail_retry_interval = account.60.reg_failed_retry_min_time = account.60.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.60.conf_type =
account.60.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-60%
account.60.sip_server_type = account.60.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.60.register_expires_overlap = account.60.subscribe_expires_overlap = account.60.auto_dial_enable = account.60.auto_dial_num = account.60.cp_source = account.60.transfer_refer_to_contact_header.enable = #V80 Add account.60.custom_ua = account.60.callpark_enable = account.60.check_cseq.enable = account.60.check_to_tag.enable = account.60.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 328 OF 1142
account.60.line_seize.expires = account.60.update_ack_while_dialing = account.60.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.60.always_fwd.enable =
account.60.always_fwd.target =
account.60.always_fwd.off_code =
account.60.always_fwd.on_code =
account.60.busy_fwd.enable =
account.60.busy_fwd.target =
account.60.busy_fwd.off_code =
account.60.busy_fwd.on_code =
account.60.timeout_fwd.enable =
account.60.timeout_fwd.target =
account.60.timeout_fwd.timeout =
account.60.timeout_fwd.off_code =
account.60.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.60.dnd.enable =
account.60.dnd.on_code =
account.60.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.60.reg.enable =
handset.60.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.60.xsi.user =%BWLOGIN-ID-60% account.60.xsi.password =%XSIPASSWORD-60% account.60.xsi.host =%XSP_ADDRESS% account.60.xsi.server_type = account.60.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 329 OF 1142
########################################################################## ############# handset.60.ldap.enable = handset.60.ldap.name_filter= handset.60.ldap.number_filter= handset.60.ldap.host= handset.60.ldap.port= handset.60.ldap.base= handset.60.ldap.user= handset.60.ldap.password= handset.60.ldap.max_hits= handset.60.ldap.name_attr= handset.60.ldap.numb_attr= handset.60.ldap.display_name= handset.60.ldap.version= handset.60.ldap.call_in_lookup= handset.60.ldap.ldap_sort= handset.60.ldap.tls_mode= handset.60.ldap.call_out_lookup= handset.60.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account61 Settings
##
##########################################################################
#############
account.61.enable=%BWLINE-BINARY-61% account.61.label=%BWEXTENSION-61% account.61.display_name=%BWCLID-61% account.61.auth_name=%BWAUTHUSER-61% account.61.user_name=%BWLINEPORT-61% account.61.password=%BWAUTHPASSWORD-61%
#W80B ADD account.61.sip_server.template = account.61.media_transmit.enable =
account.61.alarm.template = account.61.alarm.server = account.61.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.61.sip_server.1.failback_mode =
account.61.sip_server.1.failback_timeout =
account.61.sip_server.1.register_on_enable =
account.61.sip_server.1.failback_subscribe.enable =
account.61.sip_server.1.invite_retry_counts =
account.61.sip_server.1.only_signal_with_registered =
account.61.sip_server.2.failback_mode = account.61.sip_server.2.failback_timeout = account.61.sip_server.2.register_on_enable = account.61.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 330 OF 1142
account.61.sip_server.2.invite_retry_counts = account.61.sip_server.2.only_signal_with_registered =
account.61.naptr_build = account.61.fallback.redundancy_type = account.61.fallback.timeout =
account.61.dns_cache_type = account.61.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.61.anonymous_call =
account.61.reject_anonymous_call =
account.61.send_anonymous_code =
account.61.anonymous_call_oncode =
account.61.anonymous_call_offcode =
account.61.send_anonymous_rejection_code =
account.61.anonymous_reject_oncode =
account.61.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.61.codec.g722.enable =
account.61.codec.g722.priority =
account.61.codec.g729.enable = account.61.codec.g729.priority =
account.61.codec.g726_16.enable = account.61.codec.g726_16.priority =
account.61.codec.g726_24.enable = account.61.codec.g726_24.priority =
account.61.codec.g726_32.enable = account.61.codec.g726_32.priority =
account.61.codec.g726_40.enable = account.61.codec.g726_40.priority =
account.61.codec.ilbc.enable = account.61.codec.ilbc.priority =
account.61.codec.pcmu.enable = account.61.codec.pcmu.priority =
account.61.codec.pcma.enable = account.61.codec.pcma.priority =
account.61.codec.opus.enable = account.61.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 331 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.61.nat.nat_traversal = account.61.nat.udp_update_enable = account.61.nat.udp_update_time = account.61.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.61.blf.subscribe_period = account.61.dtmf.type = account.61.dtmf.dtmf_payload = account.61.dtmf.info_type = account.61.100rel_enable = account.61.subscribe_register = account.61.subscribe_mwi = account.61.subscribe_mwi_expires = account.61.subscribe_mwi_to_vm = voice_mail.number.61 = %BWVOICE-PORTAL-NUMBER-61% account.61.display_mwi.enable = account.61.cid_source = account.61.cid_source_privacy = account.61.cid_source_ppi = account.61.session_timer.enable = account.61.session_timer.expires = account.61.session_timer.refresher = account.61.enable_user_equal_phone = account.61.srtp_encryption = account.61.ptime = account.61.shared_line = %BWSHAREDLINE-BINARY-61% account.61.register_mac = account.61.register_line = account.61.reg_fail_retry_interval = account.61.reg_failed_retry_min_time = account.61.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.61.conf_type =
account.61.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-61%
account.61.sip_server_type = account.61.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 332 OF 1142
########################################################################## ############# ##DECT V81 Add
account.61.register_expires_overlap = account.61.subscribe_expires_overlap = account.61.auto_dial_enable = account.61.auto_dial_num = account.61.cp_source = account.61.transfer_refer_to_contact_header.enable = #V80 Add account.61.custom_ua = account.61.callpark_enable = account.61.check_cseq.enable = account.61.check_to_tag.enable = account.61.hold_use_inactive = account.61.line_seize.expires = account.61.update_ack_while_dialing = account.61.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.61.always_fwd.enable =
account.61.always_fwd.target =
account.61.always_fwd.off_code =
account.61.always_fwd.on_code =
account.61.busy_fwd.enable =
account.61.busy_fwd.target =
account.61.busy_fwd.off_code =
account.61.busy_fwd.on_code =
account.61.timeout_fwd.enable =
account.61.timeout_fwd.target =
account.61.timeout_fwd.timeout =
account.61.timeout_fwd.off_code =
account.61.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.61.dnd.enable =
account.61.dnd.on_code =
account.61.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.61.reg.enable =
handset.61.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 333 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.61.xsi.user =%BWLOGIN-ID-61% account.61.xsi.password =%XSIPASSWORD-61% account.61.xsi.host =%XSP_ADDRESS% account.61.xsi.server_type = account.61.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.61.ldap.enable =
handset.61.ldap.name_filter=
handset.61.ldap.number_filter=
handset.61.ldap.host=
handset.61.ldap.port=
handset.61.ldap.base=
handset.61.ldap.user=
handset.61.ldap.password=
handset.61.ldap.max_hits=
handset.61.ldap.name_attr=
handset.61.ldap.numb_attr=
handset.61.ldap.display_name=
handset.61.ldap.version=
handset.61.ldap.call_in_lookup=
handset.61.ldap.ldap_sort=
handset.61.ldap.tls_mode=
handset.61.ldap.call_out_lookup=
handset.61.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account62 Settings
##
##########################################################################
#############
account.62.enable=%BWLINE-BINARY-62% account.62.label=%BWEXTENSION-62% account.62.display_name=%BWCLID-62% account.62.auth_name=%BWAUTHUSER-62% account.62.user_name=%BWLINEPORT-62% account.62.password=%BWAUTHPASSWORD-62%
#W80B ADD account.62.sip_server.template = account.62.media_transmit.enable =
account.62.alarm.template = account.62.alarm.server = account.62.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 334 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.62.sip_server.1.failback_mode =
account.62.sip_server.1.failback_timeout =
account.62.sip_server.1.register_on_enable =
account.62.sip_server.1.failback_subscribe.enable =
account.62.sip_server.1.invite_retry_counts =
account.62.sip_server.1.only_signal_with_registered =
account.62.sip_server.2.failback_mode = account.62.sip_server.2.failback_timeout = account.62.sip_server.2.register_on_enable = account.62.sip_server.2.failback_subscribe.enable = account.62.sip_server.2.invite_retry_counts = account.62.sip_server.2.only_signal_with_registered =
account.62.naptr_build = account.62.fallback.redundancy_type = account.62.fallback.timeout =
account.62.dns_cache_type = account.62.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.62.anonymous_call =
account.62.reject_anonymous_call =
account.62.send_anonymous_code =
account.62.anonymous_call_oncode =
account.62.anonymous_call_offcode =
account.62.send_anonymous_rejection_code =
account.62.anonymous_reject_oncode =
account.62.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.62.codec.g722.enable =
account.62.codec.g722.priority =
account.62.codec.g729.enable = account.62.codec.g729.priority =
account.62.codec.g726_16.enable = account.62.codec.g726_16.priority =
account.62.codec.g726_24.enable = account.62.codec.g726_24.priority =
account.62.codec.g726_32.enable = account.62.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 335 OF 1142
account.62.codec.g726_40.enable = account.62.codec.g726_40.priority =
account.62.codec.ilbc.enable = account.62.codec.ilbc.priority =
account.62.codec.pcmu.enable = account.62.codec.pcmu.priority =
account.62.codec.pcma.enable = account.62.codec.pcma.priority =
account.62.codec.opus.enable = account.62.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.62.nat.nat_traversal = account.62.nat.udp_update_enable = account.62.nat.udp_update_time = account.62.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.62.blf.subscribe_period = account.62.dtmf.type = account.62.dtmf.dtmf_payload = account.62.dtmf.info_type = account.62.100rel_enable = account.62.subscribe_register = account.62.subscribe_mwi = account.62.subscribe_mwi_expires = account.62.subscribe_mwi_to_vm = voice_mail.number.62 = %BWVOICE-PORTAL-NUMBER-62% account.62.display_mwi.enable = account.62.cid_source = account.62.cid_source_privacy = account.62.cid_source_ppi = account.62.session_timer.enable = account.62.session_timer.expires = account.62.session_timer.refresher = account.62.enable_user_equal_phone = account.62.srtp_encryption = account.62.ptime = account.62.shared_line = %BWSHAREDLINE-BINARY-62% account.62.register_mac = account.62.register_line = account.62.reg_fail_retry_interval = account.62.reg_failed_retry_min_time = account.62.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 336 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.62.conf_type =
account.62.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-62%
account.62.sip_server_type = account.62.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.62.register_expires_overlap = account.62.subscribe_expires_overlap = account.62.auto_dial_enable = account.62.auto_dial_num = account.62.cp_source = account.62.transfer_refer_to_contact_header.enable = #V80 Add account.62.custom_ua = account.62.callpark_enable = account.62.check_cseq.enable = account.62.check_to_tag.enable = account.62.hold_use_inactive = account.62.line_seize.expires = account.62.update_ack_while_dialing = account.62.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.62.always_fwd.enable =
account.62.always_fwd.target =
account.62.always_fwd.off_code =
account.62.always_fwd.on_code =
account.62.busy_fwd.enable =
account.62.busy_fwd.target =
account.62.busy_fwd.off_code =
account.62.busy_fwd.on_code =
account.62.timeout_fwd.enable =
account.62.timeout_fwd.target =
account.62.timeout_fwd.timeout =
account.62.timeout_fwd.off_code =
account.62.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 337 OF 1142
account.62.dnd.enable = account.62.dnd.on_code = account.62.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.62.reg.enable =
handset.62.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.62.xsi.user =%BWLOGIN-ID-62% account.62.xsi.password =%XSIPASSWORD-62% account.62.xsi.host =%XSP_ADDRESS% account.62.xsi.server_type = account.62.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.62.ldap.enable =
handset.62.ldap.name_filter=
handset.62.ldap.number_filter=
handset.62.ldap.host=
handset.62.ldap.port=
handset.62.ldap.base=
handset.62.ldap.user=
handset.62.ldap.password=
handset.62.ldap.max_hits=
handset.62.ldap.name_attr=
handset.62.ldap.numb_attr=
handset.62.ldap.display_name=
handset.62.ldap.version=
handset.62.ldap.call_in_lookup=
handset.62.ldap.ldap_sort=
handset.62.ldap.tls_mode=
handset.62.ldap.call_out_lookup=
handset.62.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account63 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 338 OF 1142
account.63.enable=%BWLINE-BINARY-63% account.63.label=%BWEXTENSION-63% account.63.display_name=%BWCLID-63% account.63.auth_name=%BWAUTHUSER-63% account.63.user_name=%BWLINEPORT-63% account.63.password=%BWAUTHPASSWORD-63%
#W80B ADD account.63.sip_server.template = account.63.media_transmit.enable =
account.63.alarm.template = account.63.alarm.server = account.63.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.63.sip_server.1.failback_mode =
account.63.sip_server.1.failback_timeout =
account.63.sip_server.1.register_on_enable =
account.63.sip_server.1.failback_subscribe.enable =
account.63.sip_server.1.invite_retry_counts =
account.63.sip_server.1.only_signal_with_registered =
account.63.sip_server.2.failback_mode = account.63.sip_server.2.failback_timeout = account.63.sip_server.2.register_on_enable = account.63.sip_server.2.failback_subscribe.enable = account.63.sip_server.2.invite_retry_counts = account.63.sip_server.2.only_signal_with_registered =
account.63.naptr_build = account.63.fallback.redundancy_type = account.63.fallback.timeout =
account.63.dns_cache_type = account.63.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.63.anonymous_call =
account.63.reject_anonymous_call =
account.63.send_anonymous_code =
account.63.anonymous_call_oncode =
account.63.anonymous_call_offcode =
account.63.send_anonymous_rejection_code =
account.63.anonymous_reject_oncode =
account.63.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 339 OF 1142
########################################################################## ############# account.63.codec.g722.enable = account.63.codec.g722.priority =
account.63.codec.g729.enable = account.63.codec.g729.priority =
account.63.codec.g726_16.enable = account.63.codec.g726_16.priority =
account.63.codec.g726_24.enable = account.63.codec.g726_24.priority =
account.63.codec.g726_32.enable = account.63.codec.g726_32.priority =
account.63.codec.g726_40.enable = account.63.codec.g726_40.priority =
account.63.codec.ilbc.enable = account.63.codec.ilbc.priority =
account.63.codec.pcmu.enable = account.63.codec.pcmu.priority =
account.63.codec.pcma.enable = account.63.codec.pcma.priority =
account.63.codec.opus.enable = account.63.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.63.nat.nat_traversal = account.63.nat.udp_update_enable = account.63.nat.udp_update_time = account.63.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.63.blf.subscribe_period = account.63.dtmf.type = account.63.dtmf.dtmf_payload = account.63.dtmf.info_type = account.63.100rel_enable = account.63.subscribe_register = account.63.subscribe_mwi = account.63.subscribe_mwi_expires = account.63.subscribe_mwi_to_vm = voice_mail.number.63 = %BWVOICE-PORTAL-NUMBER-63% account.63.display_mwi.enable = account.63.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 340 OF 1142
account.63.cid_source_privacy = account.63.cid_source_ppi = account.63.session_timer.enable = account.63.session_timer.expires = account.63.session_timer.refresher = account.63.enable_user_equal_phone = account.63.srtp_encryption = account.63.ptime = account.63.shared_line = %BWSHAREDLINE-BINARY-63% account.63.register_mac = account.63.register_line = account.63.reg_fail_retry_interval = account.63.reg_failed_retry_min_time = account.63.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.63.conf_type =
account.63.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-63%
account.63.sip_server_type = account.63.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.63.register_expires_overlap = account.63.subscribe_expires_overlap = account.63.auto_dial_enable = account.63.auto_dial_num = account.63.cp_source = account.63.transfer_refer_to_contact_header.enable = #V80 Add account.63.custom_ua = account.63.callpark_enable = account.63.check_cseq.enable = account.63.check_to_tag.enable = account.63.hold_use_inactive = account.63.line_seize.expires = account.63.update_ack_while_dialing = account.63.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.63.always_fwd.enable =
account.63.always_fwd.target =
account.63.always_fwd.off_code =
account.63.always_fwd.on_code =
account.63.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 341 OF 1142
account.63.busy_fwd.target = account.63.busy_fwd.off_code = account.63.busy_fwd.on_code = account.63.timeout_fwd.enable = account.63.timeout_fwd.target = account.63.timeout_fwd.timeout = account.63.timeout_fwd.off_code = account.63.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.63.dnd.enable =
account.63.dnd.on_code =
account.63.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.63.reg.enable =
handset.63.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.63.xsi.user =%BWLOGIN-ID-63% account.63.xsi.password =%XSIPASSWORD-63% account.63.xsi.host =%XSP_ADDRESS% account.63.xsi.server_type = account.63.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.63.ldap.enable =
handset.63.ldap.name_filter=
handset.63.ldap.number_filter=
handset.63.ldap.host=
handset.63.ldap.port=
handset.63.ldap.base=
handset.63.ldap.user=
handset.63.ldap.password=
handset.63.ldap.max_hits=
handset.63.ldap.name_attr=
handset.63.ldap.numb_attr=
handset.63.ldap.display_name=
handset.63.ldap.version=
handset.63.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 342 OF 1142
handset.63.ldap.ldap_sort= handset.63.ldap.tls_mode= handset.63.ldap.call_out_lookup= handset.63.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account64 Settings
##
##########################################################################
#############
account.64.enable=%BWLINE-BINARY-64% account.64.label=%BWEXTENSION-64% account.64.display_name=%BWCLID-64% account.64.auth_name=%BWAUTHUSER-64% account.64.user_name=%BWLINEPORT-64% account.64.password=%BWAUTHPASSWORD-64%
#W80B ADD account.64.sip_server.template = account.64.media_transmit.enable =
account.64.alarm.template = account.64.alarm.server = account.64.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.64.sip_server.1.failback_mode =
account.64.sip_server.1.failback_timeout =
account.64.sip_server.1.register_on_enable =
account.64.sip_server.1.failback_subscribe.enable =
account.64.sip_server.1.invite_retry_counts =
account.64.sip_server.1.only_signal_with_registered =
account.64.sip_server.2.failback_mode = account.64.sip_server.2.failback_timeout = account.64.sip_server.2.register_on_enable = account.64.sip_server.2.failback_subscribe.enable = account.64.sip_server.2.invite_retry_counts = account.64.sip_server.2.only_signal_with_registered =
account.64.naptr_build = account.64.fallback.redundancy_type = account.64.fallback.timeout =
account.64.dns_cache_type = account.64.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 343 OF 1142
account.64.anonymous_call = account.64.reject_anonymous_call = account.64.send_anonymous_code = account.64.anonymous_call_oncode = account.64.anonymous_call_offcode = account.64.send_anonymous_rejection_code = account.64.anonymous_reject_oncode = account.64.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.64.codec.g722.enable =
account.64.codec.g722.priority =
account.64.codec.g729.enable = account.64.codec.g729.priority =
account.64.codec.g726_16.enable = account.64.codec.g726_16.priority =
account.64.codec.g726_24.enable = account.64.codec.g726_24.priority =
account.64.codec.g726_32.enable = account.64.codec.g726_32.priority =
account.64.codec.g726_40.enable = account.64.codec.g726_40.priority =
account.64.codec.ilbc.enable = account.64.codec.ilbc.priority =
account.64.codec.pcmu.enable = account.64.codec.pcmu.priority =
account.64.codec.pcma.enable = account.64.codec.pcma.priority =
account.64.codec.opus.enable = account.64.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.64.nat.nat_traversal = account.64.nat.udp_update_enable = account.64.nat.udp_update_time = account.64.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 344 OF 1142
########################################################################## #############
account.64.blf.subscribe_period = account.64.dtmf.type = account.64.dtmf.dtmf_payload = account.64.dtmf.info_type = account.64.100rel_enable = account.64.subscribe_register = account.64.subscribe_mwi = account.64.subscribe_mwi_expires = account.64.subscribe_mwi_to_vm = voice_mail.number.64 = %BWVOICE-PORTAL-NUMBER-64% account.64.display_mwi.enable = account.64.cid_source = account.64.cid_source_privacy = account.64.cid_source_ppi = account.64.session_timer.enable = account.64.session_timer.expires = account.64.session_timer.refresher = account.64.enable_user_equal_phone = account.64.srtp_encryption = account.64.ptime = account.64.shared_line = %BWSHAREDLINE-BINARY-64% account.64.register_mac = account.64.register_line = account.64.reg_fail_retry_interval = account.64.reg_failed_retry_min_time = account.64.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.64.conf_type =
account.64.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-64%
account.64.sip_server_type = account.64.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.64.register_expires_overlap = account.64.subscribe_expires_overlap = account.64.auto_dial_enable = account.64.auto_dial_num = account.64.cp_source = account.64.transfer_refer_to_contact_header.enable = #V80 Add account.64.custom_ua = account.64.callpark_enable = account.64.check_cseq.enable = account.64.check_to_tag.enable = account.64.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 345 OF 1142
account.64.line_seize.expires = account.64.update_ack_while_dialing = account.64.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.64.always_fwd.enable =
account.64.always_fwd.target =
account.64.always_fwd.off_code =
account.64.always_fwd.on_code =
account.64.busy_fwd.enable =
account.64.busy_fwd.target =
account.64.busy_fwd.off_code =
account.64.busy_fwd.on_code =
account.64.timeout_fwd.enable =
account.64.timeout_fwd.target =
account.64.timeout_fwd.timeout =
account.64.timeout_fwd.off_code =
account.64.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.64.dnd.enable =
account.64.dnd.on_code =
account.64.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.64.reg.enable =
handset.64.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.64.xsi.user =%BWLOGIN-ID-64% account.64.xsi.password =%XSIPASSWORD-64% account.64.xsi.host =%XSP_ADDRESS% account.64.xsi.server_type = account.64.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 346 OF 1142
########################################################################## ############# handset.64.ldap.enable = handset.64.ldap.name_filter= handset.64.ldap.number_filter= handset.64.ldap.host= handset.64.ldap.port= handset.64.ldap.base= handset.64.ldap.user= handset.64.ldap.password= handset.64.ldap.max_hits= handset.64.ldap.name_attr= handset.64.ldap.numb_attr= handset.64.ldap.display_name= handset.64.ldap.version= handset.64.ldap.call_in_lookup= handset.64.ldap.ldap_sort= handset.64.ldap.tls_mode= handset.64.ldap.call_out_lookup= handset.64.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account65 Settings
##
##########################################################################
#############
account.65.enable=%BWLINE-BINARY-65% account.65.label=%BWEXTENSION-65% account.65.display_name=%BWCLID-65% account.65.auth_name=%BWAUTHUSER-65% account.65.user_name=%BWLINEPORT-65% account.65.password=%BWAUTHPASSWORD-65%
#W80B ADD account.65.sip_server.template = account.65.media_transmit.enable =
account.65.alarm.template = account.65.alarm.server = account.65.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.65.sip_server.1.failback_mode =
account.65.sip_server.1.failback_timeout =
account.65.sip_server.1.register_on_enable =
account.65.sip_server.1.failback_subscribe.enable =
account.65.sip_server.1.invite_retry_counts =
account.65.sip_server.1.only_signal_with_registered =
account.65.sip_server.2.failback_mode = account.65.sip_server.2.failback_timeout = account.65.sip_server.2.register_on_enable = account.65.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 347 OF 1142
account.65.sip_server.2.invite_retry_counts = account.65.sip_server.2.only_signal_with_registered =
account.65.naptr_build = account.65.fallback.redundancy_type = account.65.fallback.timeout =
account.65.dns_cache_type = account.65.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.65.anonymous_call =
account.65.reject_anonymous_call =
account.65.send_anonymous_code =
account.65.anonymous_call_oncode =
account.65.anonymous_call_offcode =
account.65.send_anonymous_rejection_code =
account.65.anonymous_reject_oncode =
account.65.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.65.codec.g722.enable =
account.65.codec.g722.priority =
account.65.codec.g729.enable = account.65.codec.g729.priority =
account.65.codec.g726_16.enable = account.65.codec.g726_16.priority =
account.65.codec.g726_24.enable = account.65.codec.g726_24.priority =
account.65.codec.g726_32.enable = account.65.codec.g726_32.priority =
account.65.codec.g726_40.enable = account.65.codec.g726_40.priority =
account.65.codec.ilbc.enable = account.65.codec.ilbc.priority =
account.65.codec.pcmu.enable = account.65.codec.pcmu.priority =
account.65.codec.pcma.enable = account.65.codec.pcma.priority =
account.65.codec.opus.enable = account.65.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 348 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.65.nat.nat_traversal = account.65.nat.udp_update_enable = account.65.nat.udp_update_time = account.65.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.65.blf.subscribe_period = account.65.dtmf.type = account.65.dtmf.dtmf_payload = account.65.dtmf.info_type = account.65.100rel_enable = account.65.subscribe_register = account.65.subscribe_mwi = account.65.subscribe_mwi_expires = account.65.subscribe_mwi_to_vm = voice_mail.number.65 = %BWVOICE-PORTAL-NUMBER-65% account.65.display_mwi.enable = account.65.cid_source = account.65.cid_source_privacy = account.65.cid_source_ppi = account.65.session_timer.enable = account.65.session_timer.expires = account.65.session_timer.refresher = account.65.enable_user_equal_phone = account.65.srtp_encryption = account.65.ptime = account.65.shared_line = %BWSHAREDLINE-BINARY-65% account.65.register_mac = account.65.register_line = account.65.reg_fail_retry_interval = account.65.reg_failed_retry_min_time = account.65.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.65.conf_type =
account.65.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-65%
account.65.sip_server_type = account.65.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 349 OF 1142
########################################################################## ############# ##DECT V81 Add
account.65.register_expires_overlap = account.65.subscribe_expires_overlap = account.65.auto_dial_enable = account.65.auto_dial_num = account.65.cp_source = account.65.transfer_refer_to_contact_header.enable = #V80 Add account.65.custom_ua = account.65.callpark_enable = account.65.check_cseq.enable = account.65.check_to_tag.enable = account.65.hold_use_inactive = account.65.line_seize.expires = account.65.update_ack_while_dialing = account.65.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.65.always_fwd.enable =
account.65.always_fwd.target =
account.65.always_fwd.off_code =
account.65.always_fwd.on_code =
account.65.busy_fwd.enable =
account.65.busy_fwd.target =
account.65.busy_fwd.off_code =
account.65.busy_fwd.on_code =
account.65.timeout_fwd.enable =
account.65.timeout_fwd.target =
account.65.timeout_fwd.timeout =
account.65.timeout_fwd.off_code =
account.65.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.65.dnd.enable =
account.65.dnd.on_code =
account.65.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.65.reg.enable =
handset.65.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 350 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.65.xsi.user =%BWLOGIN-ID-65% account.65.xsi.password =%XSIPASSWORD-65% account.65.xsi.host =%XSP_ADDRESS% account.65.xsi.server_type = account.65.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.65.ldap.enable =
handset.65.ldap.name_filter=
handset.65.ldap.number_filter=
handset.65.ldap.host=
handset.65.ldap.port=
handset.65.ldap.base=
handset.65.ldap.user=
handset.65.ldap.password=
handset.65.ldap.max_hits=
handset.65.ldap.name_attr=
handset.65.ldap.numb_attr=
handset.65.ldap.display_name=
handset.65.ldap.version=
handset.65.ldap.call_in_lookup=
handset.65.ldap.ldap_sort=
handset.65.ldap.tls_mode=
handset.65.ldap.call_out_lookup=
handset.65.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account66 Settings
##
##########################################################################
#############
account.66.enable=%BWLINE-BINARY-66% account.66.label=%BWEXTENSION-66% account.66.display_name=%BWCLID-66% account.66.auth_name=%BWAUTHUSER-66% account.66.user_name=%BWLINEPORT-66% account.66.password=%BWAUTHPASSWORD-66%
#W80B ADD account.66.sip_server.template = account.66.media_transmit.enable =
account.66.alarm.template = account.66.alarm.server = account.66.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 351 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.66.sip_server.1.failback_mode =
account.66.sip_server.1.failback_timeout =
account.66.sip_server.1.register_on_enable =
account.66.sip_server.1.failback_subscribe.enable =
account.66.sip_server.1.invite_retry_counts =
account.66.sip_server.1.only_signal_with_registered =
account.66.sip_server.2.failback_mode = account.66.sip_server.2.failback_timeout = account.66.sip_server.2.register_on_enable = account.66.sip_server.2.failback_subscribe.enable = account.66.sip_server.2.invite_retry_counts = account.66.sip_server.2.only_signal_with_registered =
account.66.naptr_build = account.66.fallback.redundancy_type = account.66.fallback.timeout =
account.66.dns_cache_type = account.66.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.66.anonymous_call =
account.66.reject_anonymous_call =
account.66.send_anonymous_code =
account.66.anonymous_call_oncode =
account.66.anonymous_call_offcode =
account.66.send_anonymous_rejection_code =
account.66.anonymous_reject_oncode =
account.66.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.66.codec.g722.enable =
account.66.codec.g722.priority =
account.66.codec.g729.enable = account.66.codec.g729.priority =
account.66.codec.g726_16.enable = account.66.codec.g726_16.priority =
account.66.codec.g726_24.enable = account.66.codec.g726_24.priority =
account.66.codec.g726_32.enable = account.66.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 352 OF 1142
account.66.codec.g726_40.enable = account.66.codec.g726_40.priority =
account.66.codec.ilbc.enable = account.66.codec.ilbc.priority =
account.66.codec.pcmu.enable = account.66.codec.pcmu.priority =
account.66.codec.pcma.enable = account.66.codec.pcma.priority =
account.66.codec.opus.enable = account.66.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.66.nat.nat_traversal = account.66.nat.udp_update_enable = account.66.nat.udp_update_time = account.66.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.66.blf.subscribe_period = account.66.dtmf.type = account.66.dtmf.dtmf_payload = account.66.dtmf.info_type = account.66.100rel_enable = account.66.subscribe_register = account.66.subscribe_mwi = account.66.subscribe_mwi_expires = account.66.subscribe_mwi_to_vm = voice_mail.number.66 = %BWVOICE-PORTAL-NUMBER-66% account.66.display_mwi.enable = account.66.cid_source = account.66.cid_source_privacy = account.66.cid_source_ppi = account.66.session_timer.enable = account.66.session_timer.expires = account.66.session_timer.refresher = account.66.enable_user_equal_phone = account.66.srtp_encryption = account.66.ptime = account.66.shared_line = %BWSHAREDLINE-BINARY-66% account.66.register_mac = account.66.register_line = account.66.reg_fail_retry_interval = account.66.reg_failed_retry_min_time = account.66.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 353 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.66.conf_type =
account.66.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-66%
account.66.sip_server_type = account.66.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.66.register_expires_overlap = account.66.subscribe_expires_overlap = account.66.auto_dial_enable = account.66.auto_dial_num = account.66.cp_source = account.66.transfer_refer_to_contact_header.enable = #V80 Add account.66.custom_ua = account.66.callpark_enable = account.66.check_cseq.enable = account.66.check_to_tag.enable = account.66.hold_use_inactive = account.66.line_seize.expires = account.66.update_ack_while_dialing = account.66.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.66.always_fwd.enable =
account.66.always_fwd.target =
account.66.always_fwd.off_code =
account.66.always_fwd.on_code =
account.66.busy_fwd.enable =
account.66.busy_fwd.target =
account.66.busy_fwd.off_code =
account.66.busy_fwd.on_code =
account.66.timeout_fwd.enable =
account.66.timeout_fwd.target =
account.66.timeout_fwd.timeout =
account.66.timeout_fwd.off_code =
account.66.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 354 OF 1142
account.66.dnd.enable = account.66.dnd.on_code = account.66.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.66.reg.enable =
handset.66.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.66.xsi.user =%BWLOGIN-ID-66% account.66.xsi.password =%XSIPASSWORD-66% account.66.xsi.host =%XSP_ADDRESS% account.66.xsi.server_type = account.66.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.66.ldap.enable =
handset.66.ldap.name_filter=
handset.66.ldap.number_filter=
handset.66.ldap.host=
handset.66.ldap.port=
handset.66.ldap.base=
handset.66.ldap.user=
handset.66.ldap.password=
handset.66.ldap.max_hits=
handset.66.ldap.name_attr=
handset.66.ldap.numb_attr=
handset.66.ldap.display_name=
handset.66.ldap.version=
handset.66.ldap.call_in_lookup=
handset.66.ldap.ldap_sort=
handset.66.ldap.tls_mode=
handset.66.ldap.call_out_lookup=
handset.66.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account67 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 355 OF 1142
account.67.enable=%BWLINE-BINARY-67% account.67.label=%BWEXTENSION-67% account.67.display_name=%BWCLID-67% account.67.auth_name=%BWAUTHUSER-67% account.67.user_name=%BWLINEPORT-67% account.67.password=%BWAUTHPASSWORD-67%
#W80B ADD account.67.sip_server.template = account.67.media_transmit.enable =
account.67.alarm.template = account.67.alarm.server = account.67.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.67.sip_server.1.failback_mode =
account.67.sip_server.1.failback_timeout =
account.67.sip_server.1.register_on_enable =
account.67.sip_server.1.failback_subscribe.enable =
account.67.sip_server.1.invite_retry_counts =
account.67.sip_server.1.only_signal_with_registered =
account.67.sip_server.2.failback_mode = account.67.sip_server.2.failback_timeout = account.67.sip_server.2.register_on_enable = account.67.sip_server.2.failback_subscribe.enable = account.67.sip_server.2.invite_retry_counts = account.67.sip_server.2.only_signal_with_registered =
account.67.naptr_build = account.67.fallback.redundancy_type = account.67.fallback.timeout =
account.67.dns_cache_type = account.67.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.67.anonymous_call =
account.67.reject_anonymous_call =
account.67.send_anonymous_code =
account.67.anonymous_call_oncode =
account.67.anonymous_call_offcode =
account.67.send_anonymous_rejection_code =
account.67.anonymous_reject_oncode =
account.67.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 356 OF 1142
########################################################################## ############# account.67.codec.g722.enable = account.67.codec.g722.priority =
account.67.codec.g729.enable = account.67.codec.g729.priority =
account.67.codec.g726_16.enable = account.67.codec.g726_16.priority =
account.67.codec.g726_24.enable = account.67.codec.g726_24.priority =
account.67.codec.g726_32.enable = account.67.codec.g726_32.priority =
account.67.codec.g726_40.enable = account.67.codec.g726_40.priority =
account.67.codec.ilbc.enable = account.67.codec.ilbc.priority =
account.67.codec.pcmu.enable = account.67.codec.pcmu.priority =
account.67.codec.pcma.enable = account.67.codec.pcma.priority =
account.67.codec.opus.enable = account.67.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.67.nat.nat_traversal = account.67.nat.udp_update_enable = account.67.nat.udp_update_time = account.67.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.67.blf.subscribe_period = account.67.dtmf.type = account.67.dtmf.dtmf_payload = account.67.dtmf.info_type = account.67.100rel_enable = account.67.subscribe_register = account.67.subscribe_mwi = account.67.subscribe_mwi_expires = account.67.subscribe_mwi_to_vm = voice_mail.number.67 = %BWVOICE-PORTAL-NUMBER-67% account.67.display_mwi.enable = account.67.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 357 OF 1142
account.67.cid_source_privacy = account.67.cid_source_ppi = account.67.session_timer.enable = account.67.session_timer.expires = account.67.session_timer.refresher = account.67.enable_user_equal_phone = account.67.srtp_encryption = account.67.ptime = account.67.shared_line = %BWSHAREDLINE-BINARY-67% account.67.register_mac = account.67.register_line = account.67.reg_fail_retry_interval = account.67.reg_failed_retry_min_time = account.67.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.67.conf_type =
account.67.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-67%
account.67.sip_server_type = account.67.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.67.register_expires_overlap = account.67.subscribe_expires_overlap = account.67.auto_dial_enable = account.67.auto_dial_num = account.67.cp_source = account.67.transfer_refer_to_contact_header.enable = #V80 Add account.67.custom_ua = account.67.callpark_enable = account.67.check_cseq.enable = account.67.check_to_tag.enable = account.67.hold_use_inactive = account.67.line_seize.expires = account.67.update_ack_while_dialing = account.67.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.67.always_fwd.enable =
account.67.always_fwd.target =
account.67.always_fwd.off_code =
account.67.always_fwd.on_code =
account.67.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 358 OF 1142
account.67.busy_fwd.target = account.67.busy_fwd.off_code = account.67.busy_fwd.on_code = account.67.timeout_fwd.enable = account.67.timeout_fwd.target = account.67.timeout_fwd.timeout = account.67.timeout_fwd.off_code = account.67.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.67.dnd.enable =
account.67.dnd.on_code =
account.67.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.67.reg.enable =
handset.67.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.67.xsi.user =%BWLOGIN-ID-67% account.67.xsi.password =%XSIPASSWORD-67% account.67.xsi.host =%XSP_ADDRESS% account.67.xsi.server_type = account.67.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.67.ldap.enable =
handset.67.ldap.name_filter=
handset.67.ldap.number_filter=
handset.67.ldap.host=
handset.67.ldap.port=
handset.67.ldap.base=
handset.67.ldap.user=
handset.67.ldap.password=
handset.67.ldap.max_hits=
handset.67.ldap.name_attr=
handset.67.ldap.numb_attr=
handset.67.ldap.display_name=
handset.67.ldap.version=
handset.67.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 359 OF 1142
handset.67.ldap.ldap_sort= handset.67.ldap.tls_mode= handset.67.ldap.call_out_lookup= handset.67.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account68 Settings
##
##########################################################################
#############
account.68.enable=%BWLINE-BINARY-68% account.68.label=%BWEXTENSION-68% account.68.display_name=%BWCLID-68% account.68.auth_name=%BWAUTHUSER-68% account.68.user_name=%BWLINEPORT-68% account.68.password=%BWAUTHPASSWORD-68%
#W80B ADD account.68.sip_server.template = account.68.media_transmit.enable =
account.68.alarm.template = account.68.alarm.server = account.68.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.68.sip_server.1.failback_mode =
account.68.sip_server.1.failback_timeout =
account.68.sip_server.1.register_on_enable =
account.68.sip_server.1.failback_subscribe.enable =
account.68.sip_server.1.invite_retry_counts =
account.68.sip_server.1.only_signal_with_registered =
account.68.sip_server.2.failback_mode = account.68.sip_server.2.failback_timeout = account.68.sip_server.2.register_on_enable = account.68.sip_server.2.failback_subscribe.enable = account.68.sip_server.2.invite_retry_counts = account.68.sip_server.2.only_signal_with_registered =
account.68.naptr_build = account.68.fallback.redundancy_type = account.68.fallback.timeout =
account.68.dns_cache_type = account.68.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 360 OF 1142
account.68.anonymous_call = account.68.reject_anonymous_call = account.68.send_anonymous_code = account.68.anonymous_call_oncode = account.68.anonymous_call_offcode = account.68.send_anonymous_rejection_code = account.68.anonymous_reject_oncode = account.68.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.68.codec.g722.enable =
account.68.codec.g722.priority =
account.68.codec.g729.enable = account.68.codec.g729.priority =
account.68.codec.g726_16.enable = account.68.codec.g726_16.priority =
account.68.codec.g726_24.enable = account.68.codec.g726_24.priority =
account.68.codec.g726_32.enable = account.68.codec.g726_32.priority =
account.68.codec.g726_40.enable = account.68.codec.g726_40.priority =
account.68.codec.ilbc.enable = account.68.codec.ilbc.priority =
account.68.codec.pcmu.enable = account.68.codec.pcmu.priority =
account.68.codec.pcma.enable = account.68.codec.pcma.priority =
account.68.codec.opus.enable = account.68.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.68.nat.nat_traversal = account.68.nat.udp_update_enable = account.68.nat.udp_update_time = account.68.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 361 OF 1142
########################################################################## #############
account.68.blf.subscribe_period = account.68.dtmf.type = account.68.dtmf.dtmf_payload = account.68.dtmf.info_type = account.68.100rel_enable = account.68.subscribe_register = account.68.subscribe_mwi = account.68.subscribe_mwi_expires = account.68.subscribe_mwi_to_vm = voice_mail.number.68 = %BWVOICE-PORTAL-NUMBER-68% account.68.display_mwi.enable = account.68.cid_source = account.68.cid_source_privacy = account.68.cid_source_ppi = account.68.session_timer.enable = account.68.session_timer.expires = account.68.session_timer.refresher = account.68.enable_user_equal_phone = account.68.srtp_encryption = account.68.ptime = account.68.shared_line = %BWSHAREDLINE-BINARY-68% account.68.register_mac = account.68.register_line = account.68.reg_fail_retry_interval = account.68.reg_failed_retry_min_time = account.68.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.68.conf_type =
account.68.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-68%
account.68.sip_server_type = account.68.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.68.register_expires_overlap = account.68.subscribe_expires_overlap = account.68.auto_dial_enable = account.68.auto_dial_num = account.68.cp_source = account.68.transfer_refer_to_contact_header.enable = #V80 Add account.68.custom_ua = account.68.callpark_enable = account.68.check_cseq.enable = account.68.check_to_tag.enable = account.68.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 362 OF 1142
account.68.line_seize.expires = account.68.update_ack_while_dialing = account.68.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.68.always_fwd.enable =
account.68.always_fwd.target =
account.68.always_fwd.off_code =
account.68.always_fwd.on_code =
account.68.busy_fwd.enable =
account.68.busy_fwd.target =
account.68.busy_fwd.off_code =
account.68.busy_fwd.on_code =
account.68.timeout_fwd.enable =
account.68.timeout_fwd.target =
account.68.timeout_fwd.timeout =
account.68.timeout_fwd.off_code =
account.68.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.68.dnd.enable =
account.68.dnd.on_code =
account.68.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.68.reg.enable =
handset.68.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.68.xsi.user =%BWLOGIN-ID-68% account.68.xsi.password =%XSIPASSWORD-68% account.68.xsi.host =%XSP_ADDRESS% account.68.xsi.server_type = account.68.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 363 OF 1142
########################################################################## ############# handset.68.ldap.enable = handset.68.ldap.name_filter= handset.68.ldap.number_filter= handset.68.ldap.host= handset.68.ldap.port= handset.68.ldap.base= handset.68.ldap.user= handset.68.ldap.password= handset.68.ldap.max_hits= handset.68.ldap.name_attr= handset.68.ldap.numb_attr= handset.68.ldap.display_name= handset.68.ldap.version= handset.68.ldap.call_in_lookup= handset.68.ldap.ldap_sort= handset.68.ldap.tls_mode= handset.68.ldap.call_out_lookup= handset.68.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account69 Settings
##
##########################################################################
#############
account.69.enable=%BWLINE-BINARY-69% account.69.label=%BWEXTENSION-69% account.69.display_name=%BWCLID-69% account.69.auth_name=%BWAUTHUSER-69% account.69.user_name=%BWLINEPORT-69% account.69.password=%BWAUTHPASSWORD-69%
#W80B ADD account.69.sip_server.template = account.69.media_transmit.enable =
account.69.alarm.template = account.69.alarm.server = account.69.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.69.sip_server.1.failback_mode =
account.69.sip_server.1.failback_timeout =
account.69.sip_server.1.register_on_enable =
account.69.sip_server.1.failback_subscribe.enable =
account.69.sip_server.1.invite_retry_counts =
account.69.sip_server.1.only_signal_with_registered =
account.69.sip_server.2.failback_mode = account.69.sip_server.2.failback_timeout = account.69.sip_server.2.register_on_enable = account.69.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 364 OF 1142
account.69.sip_server.2.invite_retry_counts = account.69.sip_server.2.only_signal_with_registered =
account.69.naptr_build = account.69.fallback.redundancy_type = account.69.fallback.timeout =
account.69.dns_cache_type = account.69.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.69.anonymous_call =
account.69.reject_anonymous_call =
account.69.send_anonymous_code =
account.69.anonymous_call_oncode =
account.69.anonymous_call_offcode =
account.69.send_anonymous_rejection_code =
account.69.anonymous_reject_oncode =
account.69.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.69.codec.g722.enable =
account.69.codec.g722.priority =
account.69.codec.g729.enable = account.69.codec.g729.priority =
account.69.codec.g726_16.enable = account.69.codec.g726_16.priority =
account.69.codec.g726_24.enable = account.69.codec.g726_24.priority =
account.69.codec.g726_32.enable = account.69.codec.g726_32.priority =
account.69.codec.g726_40.enable = account.69.codec.g726_40.priority =
account.69.codec.ilbc.enable = account.69.codec.ilbc.priority =
account.69.codec.pcmu.enable = account.69.codec.pcmu.priority =
account.69.codec.pcma.enable = account.69.codec.pcma.priority =
account.69.codec.opus.enable = account.69.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 365 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.69.nat.nat_traversal = account.69.nat.udp_update_enable = account.69.nat.udp_update_time = account.69.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.69.blf.subscribe_period = account.69.dtmf.type = account.69.dtmf.dtmf_payload = account.69.dtmf.info_type = account.69.100rel_enable = account.69.subscribe_register = account.69.subscribe_mwi = account.69.subscribe_mwi_expires = account.69.subscribe_mwi_to_vm = voice_mail.number.69 = %BWVOICE-PORTAL-NUMBER-69% account.69.display_mwi.enable = account.69.cid_source = account.69.cid_source_privacy = account.69.cid_source_ppi = account.69.session_timer.enable = account.69.session_timer.expires = account.69.session_timer.refresher = account.69.enable_user_equal_phone = account.69.srtp_encryption = account.69.ptime = account.69.shared_line = %BWSHAREDLINE-BINARY-69% account.69.register_mac = account.69.register_line = account.69.reg_fail_retry_interval = account.69.reg_failed_retry_min_time = account.69.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.69.conf_type =
account.69.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-69%
account.69.sip_server_type = account.69.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 366 OF 1142
########################################################################## ############# ##DECT V81 Add
account.69.register_expires_overlap = account.69.subscribe_expires_overlap = account.69.auto_dial_enable = account.69.auto_dial_num = account.69.cp_source = account.69.transfer_refer_to_contact_header.enable = #V80 Add account.69.custom_ua = account.69.callpark_enable = account.69.check_cseq.enable = account.69.check_to_tag.enable = account.69.hold_use_inactive = account.69.line_seize.expires = account.69.update_ack_while_dialing = account.69.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.69.always_fwd.enable =
account.69.always_fwd.target =
account.69.always_fwd.off_code =
account.69.always_fwd.on_code =
account.69.busy_fwd.enable =
account.69.busy_fwd.target =
account.69.busy_fwd.off_code =
account.69.busy_fwd.on_code =
account.69.timeout_fwd.enable =
account.69.timeout_fwd.target =
account.69.timeout_fwd.timeout =
account.69.timeout_fwd.off_code =
account.69.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.69.dnd.enable =
account.69.dnd.on_code =
account.69.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.69.reg.enable =
handset.69.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 367 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.69.xsi.user =%BWLOGIN-ID-69% account.69.xsi.password =%XSIPASSWORD-69% account.69.xsi.host =%XSP_ADDRESS% account.69.xsi.server_type = account.69.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.69.ldap.enable =
handset.69.ldap.name_filter=
handset.69.ldap.number_filter=
handset.69.ldap.host=
handset.69.ldap.port=
handset.69.ldap.base=
handset.69.ldap.user=
handset.69.ldap.password=
handset.69.ldap.max_hits=
handset.69.ldap.name_attr=
handset.69.ldap.numb_attr=
handset.69.ldap.display_name=
handset.69.ldap.version=
handset.69.ldap.call_in_lookup=
handset.69.ldap.ldap_sort=
handset.69.ldap.tls_mode=
handset.69.ldap.call_out_lookup=
handset.69.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account70 Settings
##
##########################################################################
#############
account.70.enable=%BWLINE-BINARY-70% account.70.label=%BWEXTENSION-70% account.70.display_name=%BWCLID-70% account.70.auth_name=%BWAUTHUSER-70% account.70.user_name=%BWLINEPORT-70% account.70.password=%BWAUTHPASSWORD-70%
#W80B ADD account.70.sip_server.template = account.70.media_transmit.enable =
account.70.alarm.template = account.70.alarm.server = account.70.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 368 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.70.sip_server.1.failback_mode =
account.70.sip_server.1.failback_timeout =
account.70.sip_server.1.register_on_enable =
account.70.sip_server.1.failback_subscribe.enable =
account.70.sip_server.1.invite_retry_counts =
account.70.sip_server.1.only_signal_with_registered =
account.70.sip_server.2.failback_mode = account.70.sip_server.2.failback_timeout = account.70.sip_server.2.register_on_enable = account.70.sip_server.2.failback_subscribe.enable = account.70.sip_server.2.invite_retry_counts = account.70.sip_server.2.only_signal_with_registered =
account.70.naptr_build = account.70.fallback.redundancy_type = account.70.fallback.timeout =
account.70.dns_cache_type = account.70.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.70.anonymous_call =
account.70.reject_anonymous_call =
account.70.send_anonymous_code =
account.70.anonymous_call_oncode =
account.70.anonymous_call_offcode =
account.70.send_anonymous_rejection_code =
account.70.anonymous_reject_oncode =
account.70.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.70.codec.g722.enable =
account.70.codec.g722.priority =
account.70.codec.g729.enable = account.70.codec.g729.priority =
account.70.codec.g726_16.enable = account.70.codec.g726_16.priority =
account.70.codec.g726_24.enable = account.70.codec.g726_24.priority =
account.70.codec.g726_32.enable = account.70.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 369 OF 1142
account.70.codec.g726_40.enable = account.70.codec.g726_40.priority =
account.70.codec.ilbc.enable = account.70.codec.ilbc.priority =
account.70.codec.pcmu.enable = account.70.codec.pcmu.priority =
account.70.codec.pcma.enable = account.70.codec.pcma.priority =
account.70.codec.opus.enable = account.70.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.70.nat.nat_traversal = account.70.nat.udp_update_enable = account.70.nat.udp_update_time = account.70.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.70.blf.subscribe_period = account.70.dtmf.type = account.70.dtmf.dtmf_payload = account.70.dtmf.info_type = account.70.100rel_enable = account.70.subscribe_register = account.70.subscribe_mwi = account.70.subscribe_mwi_expires = account.70.subscribe_mwi_to_vm = voice_mail.number.70 = %BWVOICE-PORTAL-NUMBER-70% account.70.display_mwi.enable = account.70.cid_source = account.70.cid_source_privacy = account.70.cid_source_ppi = account.70.session_timer.enable = account.70.session_timer.expires = account.70.session_timer.refresher = account.70.enable_user_equal_phone = account.70.srtp_encryption = account.70.ptime = account.70.shared_line = %BWSHAREDLINE-BINARY-70% account.70.register_mac = account.70.register_line = account.70.reg_fail_retry_interval = account.70.reg_failed_retry_min_time = account.70.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 370 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.70.conf_type =
account.70.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-70%
account.70.sip_server_type = account.70.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.70.register_expires_overlap = account.70.subscribe_expires_overlap = account.70.auto_dial_enable = account.70.auto_dial_num = account.70.cp_source = account.70.transfer_refer_to_contact_header.enable = #V80 Add account.70.custom_ua = account.70.callpark_enable = account.70.check_cseq.enable = account.70.check_to_tag.enable = account.70.hold_use_inactive = account.70.line_seize.expires = account.70.update_ack_while_dialing = account.70.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.70.always_fwd.enable =
account.70.always_fwd.target =
account.70.always_fwd.off_code =
account.70.always_fwd.on_code =
account.70.busy_fwd.enable =
account.70.busy_fwd.target =
account.70.busy_fwd.off_code =
account.70.busy_fwd.on_code =
account.70.timeout_fwd.enable =
account.70.timeout_fwd.target =
account.70.timeout_fwd.timeout =
account.70.timeout_fwd.off_code =
account.70.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 371 OF 1142
account.70.dnd.enable = account.70.dnd.on_code = account.70.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.70.reg.enable =
handset.70.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.70.xsi.user =%BWLOGIN-ID-70% account.70.xsi.password =%XSIPASSWORD-70% account.70.xsi.host =%XSP_ADDRESS% account.70.xsi.server_type = account.70.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.70.ldap.enable =
handset.70.ldap.name_filter=
handset.70.ldap.number_filter=
handset.70.ldap.host=
handset.70.ldap.port=
handset.70.ldap.base=
handset.70.ldap.user=
handset.70.ldap.password=
handset.70.ldap.max_hits=
handset.70.ldap.name_attr=
handset.70.ldap.numb_attr=
handset.70.ldap.display_name=
handset.70.ldap.version=
handset.70.ldap.call_in_lookup=
handset.70.ldap.ldap_sort=
handset.70.ldap.tls_mode=
handset.70.ldap.call_out_lookup=
handset.70.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account71 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 372 OF 1142
account.71.enable=%BWLINE-BINARY-71% account.71.label=%BWEXTENSION-71% account.71.display_name=%BWCLID-71% account.71.auth_name=%BWAUTHUSER-71% account.71.user_name=%BWLINEPORT-71% account.71.password=%BWAUTHPASSWORD-71%
#W80B ADD account.71.sip_server.template = account.71.media_transmit.enable =
account.71.alarm.template = account.71.alarm.server = account.71.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.71.sip_server.1.failback_mode =
account.71.sip_server.1.failback_timeout =
account.71.sip_server.1.register_on_enable =
account.71.sip_server.1.failback_subscribe.enable =
account.71.sip_server.1.invite_retry_counts =
account.71.sip_server.1.only_signal_with_registered =
account.71.sip_server.2.failback_mode = account.71.sip_server.2.failback_timeout = account.71.sip_server.2.register_on_enable = account.71.sip_server.2.failback_subscribe.enable = account.71.sip_server.2.invite_retry_counts = account.71.sip_server.2.only_signal_with_registered =
account.71.naptr_build = account.71.fallback.redundancy_type = account.71.fallback.timeout =
account.71.dns_cache_type = account.71.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.71.anonymous_call =
account.71.reject_anonymous_call =
account.71.send_anonymous_code =
account.71.anonymous_call_oncode =
account.71.anonymous_call_offcode =
account.71.send_anonymous_rejection_code =
account.71.anonymous_reject_oncode =
account.71.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 373 OF 1142
########################################################################## ############# account.71.codec.g722.enable = account.71.codec.g722.priority =
account.71.codec.g729.enable = account.71.codec.g729.priority =
account.71.codec.g726_16.enable = account.71.codec.g726_16.priority =
account.71.codec.g726_24.enable = account.71.codec.g726_24.priority =
account.71.codec.g726_32.enable = account.71.codec.g726_32.priority =
account.71.codec.g726_40.enable = account.71.codec.g726_40.priority =
account.71.codec.ilbc.enable = account.71.codec.ilbc.priority =
account.71.codec.pcmu.enable = account.71.codec.pcmu.priority =
account.71.codec.pcma.enable = account.71.codec.pcma.priority =
account.71.codec.opus.enable = account.71.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.71.nat.nat_traversal = account.71.nat.udp_update_enable = account.71.nat.udp_update_time = account.71.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.71.blf.subscribe_period = account.71.dtmf.type = account.71.dtmf.dtmf_payload = account.71.dtmf.info_type = account.71.100rel_enable = account.71.subscribe_register = account.71.subscribe_mwi = account.71.subscribe_mwi_expires = account.71.subscribe_mwi_to_vm = voice_mail.number.71 = %BWVOICE-PORTAL-NUMBER-71% account.71.display_mwi.enable = account.71.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 374 OF 1142
account.71.cid_source_privacy = account.71.cid_source_ppi = account.71.session_timer.enable = account.71.session_timer.expires = account.71.session_timer.refresher = account.71.enable_user_equal_phone = account.71.srtp_encryption = account.71.ptime = account.71.shared_line = %BWSHAREDLINE-BINARY-71% account.71.register_mac = account.71.register_line = account.71.reg_fail_retry_interval = account.71.reg_failed_retry_min_time = account.71.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.71.conf_type =
account.71.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-71%
account.71.sip_server_type = account.71.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.71.register_expires_overlap = account.71.subscribe_expires_overlap = account.71.auto_dial_enable = account.71.auto_dial_num = account.71.cp_source = account.71.transfer_refer_to_contact_header.enable = #V80 Add account.71.custom_ua = account.71.callpark_enable = account.71.check_cseq.enable = account.71.check_to_tag.enable = account.71.hold_use_inactive = account.71.line_seize.expires = account.71.update_ack_while_dialing = account.71.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.71.always_fwd.enable =
account.71.always_fwd.target =
account.71.always_fwd.off_code =
account.71.always_fwd.on_code =
account.71.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 375 OF 1142
account.71.busy_fwd.target = account.71.busy_fwd.off_code = account.71.busy_fwd.on_code = account.71.timeout_fwd.enable = account.71.timeout_fwd.target = account.71.timeout_fwd.timeout = account.71.timeout_fwd.off_code = account.71.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.71.dnd.enable =
account.71.dnd.on_code =
account.71.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.71.reg.enable =
handset.71.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.71.xsi.user =%BWLOGIN-ID-71% account.71.xsi.password =%XSIPASSWORD-71% account.71.xsi.host =%XSP_ADDRESS% account.71.xsi.server_type = account.71.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.71.ldap.enable =
handset.71.ldap.name_filter=
handset.71.ldap.number_filter=
handset.71.ldap.host=
handset.71.ldap.port=
handset.71.ldap.base=
handset.71.ldap.user=
handset.71.ldap.password=
handset.71.ldap.max_hits=
handset.71.ldap.name_attr=
handset.71.ldap.numb_attr=
handset.71.ldap.display_name=
handset.71.ldap.version=
handset.71.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 376 OF 1142
handset.71.ldap.ldap_sort= handset.71.ldap.tls_mode= handset.71.ldap.call_out_lookup= handset.71.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account72 Settings
##
##########################################################################
#############
account.72.enable=%BWLINE-BINARY-72% account.72.label=%BWEXTENSION-72% account.72.display_name=%BWCLID-72% account.72.auth_name=%BWAUTHUSER-72% account.72.user_name=%BWLINEPORT-72% account.72.password=%BWAUTHPASSWORD-72%
#W80B ADD account.72.sip_server.template = account.72.media_transmit.enable =
account.72.alarm.template = account.72.alarm.server = account.72.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.72.sip_server.1.failback_mode =
account.72.sip_server.1.failback_timeout =
account.72.sip_server.1.register_on_enable =
account.72.sip_server.1.failback_subscribe.enable =
account.72.sip_server.1.invite_retry_counts =
account.72.sip_server.1.only_signal_with_registered =
account.72.sip_server.2.failback_mode = account.72.sip_server.2.failback_timeout = account.72.sip_server.2.register_on_enable = account.72.sip_server.2.failback_subscribe.enable = account.72.sip_server.2.invite_retry_counts = account.72.sip_server.2.only_signal_with_registered =
account.72.naptr_build = account.72.fallback.redundancy_type = account.72.fallback.timeout =
account.72.dns_cache_type = account.72.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 377 OF 1142
account.72.anonymous_call = account.72.reject_anonymous_call = account.72.send_anonymous_code = account.72.anonymous_call_oncode = account.72.anonymous_call_offcode = account.72.send_anonymous_rejection_code = account.72.anonymous_reject_oncode = account.72.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.72.codec.g722.enable =
account.72.codec.g722.priority =
account.72.codec.g729.enable = account.72.codec.g729.priority =
account.72.codec.g726_16.enable = account.72.codec.g726_16.priority =
account.72.codec.g726_24.enable = account.72.codec.g726_24.priority =
account.72.codec.g726_32.enable = account.72.codec.g726_32.priority =
account.72.codec.g726_40.enable = account.72.codec.g726_40.priority =
account.72.codec.ilbc.enable = account.72.codec.ilbc.priority =
account.72.codec.pcmu.enable = account.72.codec.pcmu.priority =
account.72.codec.pcma.enable = account.72.codec.pcma.priority =
account.72.codec.opus.enable = account.72.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.72.nat.nat_traversal = account.72.nat.udp_update_enable = account.72.nat.udp_update_time = account.72.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 378 OF 1142
########################################################################## #############
account.72.blf.subscribe_period = account.72.dtmf.type = account.72.dtmf.dtmf_payload = account.72.dtmf.info_type = account.72.100rel_enable = account.72.subscribe_register = account.72.subscribe_mwi = account.72.subscribe_mwi_expires = account.72.subscribe_mwi_to_vm = voice_mail.number.72 = %BWVOICE-PORTAL-NUMBER-72% account.72.display_mwi.enable = account.72.cid_source = account.72.cid_source_privacy = account.72.cid_source_ppi = account.72.session_timer.enable = account.72.session_timer.expires = account.72.session_timer.refresher = account.72.enable_user_equal_phone = account.72.srtp_encryption = account.72.ptime = account.72.shared_line = %BWSHAREDLINE-BINARY-72% account.72.register_mac = account.72.register_line = account.72.reg_fail_retry_interval = account.72.reg_failed_retry_min_time = account.72.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.72.conf_type =
account.72.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-72%
account.72.sip_server_type = account.72.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.72.register_expires_overlap = account.72.subscribe_expires_overlap = account.72.auto_dial_enable = account.72.auto_dial_num = account.72.cp_source = account.72.transfer_refer_to_contact_header.enable = #V80 Add account.72.custom_ua = account.72.callpark_enable = account.72.check_cseq.enable = account.72.check_to_tag.enable = account.72.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 379 OF 1142
account.72.line_seize.expires = account.72.update_ack_while_dialing = account.72.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.72.always_fwd.enable =
account.72.always_fwd.target =
account.72.always_fwd.off_code =
account.72.always_fwd.on_code =
account.72.busy_fwd.enable =
account.72.busy_fwd.target =
account.72.busy_fwd.off_code =
account.72.busy_fwd.on_code =
account.72.timeout_fwd.enable =
account.72.timeout_fwd.target =
account.72.timeout_fwd.timeout =
account.72.timeout_fwd.off_code =
account.72.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.72.dnd.enable =
account.72.dnd.on_code =
account.72.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.72.reg.enable =
handset.72.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.72.xsi.user =%BWLOGIN-ID-72% account.72.xsi.password =%XSIPASSWORD-72% account.72.xsi.host =%XSP_ADDRESS% account.72.xsi.server_type = account.72.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 380 OF 1142
########################################################################## ############# handset.72.ldap.enable = handset.72.ldap.name_filter= handset.72.ldap.number_filter= handset.72.ldap.host= handset.72.ldap.port= handset.72.ldap.base= handset.72.ldap.user= handset.72.ldap.password= handset.72.ldap.max_hits= handset.72.ldap.name_attr= handset.72.ldap.numb_attr= handset.72.ldap.display_name= handset.72.ldap.version= handset.72.ldap.call_in_lookup= handset.72.ldap.ldap_sort= handset.72.ldap.tls_mode= handset.72.ldap.call_out_lookup= handset.72.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account73 Settings
##
##########################################################################
#############
account.73.enable=%BWLINE-BINARY-73% account.73.label=%BWEXTENSION-73% account.73.display_name=%BWCLID-73% account.73.auth_name=%BWAUTHUSER-73% account.73.user_name=%BWLINEPORT-73% account.73.password=%BWAUTHPASSWORD-73%
#W80B ADD account.73.sip_server.template = account.73.media_transmit.enable =
account.73.alarm.template = account.73.alarm.server = account.73.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.73.sip_server.1.failback_mode =
account.73.sip_server.1.failback_timeout =
account.73.sip_server.1.register_on_enable =
account.73.sip_server.1.failback_subscribe.enable =
account.73.sip_server.1.invite_retry_counts =
account.73.sip_server.1.only_signal_with_registered =
account.73.sip_server.2.failback_mode = account.73.sip_server.2.failback_timeout = account.73.sip_server.2.register_on_enable = account.73.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 381 OF 1142
account.73.sip_server.2.invite_retry_counts = account.73.sip_server.2.only_signal_with_registered =
account.73.naptr_build = account.73.fallback.redundancy_type = account.73.fallback.timeout =
account.73.dns_cache_type = account.73.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.73.anonymous_call =
account.73.reject_anonymous_call =
account.73.send_anonymous_code =
account.73.anonymous_call_oncode =
account.73.anonymous_call_offcode =
account.73.send_anonymous_rejection_code =
account.73.anonymous_reject_oncode =
account.73.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.73.codec.g722.enable =
account.73.codec.g722.priority =
account.73.codec.g729.enable = account.73.codec.g729.priority =
account.73.codec.g726_16.enable = account.73.codec.g726_16.priority =
account.73.codec.g726_24.enable = account.73.codec.g726_24.priority =
account.73.codec.g726_32.enable = account.73.codec.g726_32.priority =
account.73.codec.g726_40.enable = account.73.codec.g726_40.priority =
account.73.codec.ilbc.enable = account.73.codec.ilbc.priority =
account.73.codec.pcmu.enable = account.73.codec.pcmu.priority =
account.73.codec.pcma.enable = account.73.codec.pcma.priority =
account.73.codec.opus.enable = account.73.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 382 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.73.nat.nat_traversal = account.73.nat.udp_update_enable = account.73.nat.udp_update_time = account.73.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.73.blf.subscribe_period = account.73.dtmf.type = account.73.dtmf.dtmf_payload = account.73.dtmf.info_type = account.73.100rel_enable = account.73.subscribe_register = account.73.subscribe_mwi = account.73.subscribe_mwi_expires = account.73.subscribe_mwi_to_vm = voice_mail.number.73 = %BWVOICE-PORTAL-NUMBER-73% account.73.display_mwi.enable = account.73.cid_source = account.73.cid_source_privacy = account.73.cid_source_ppi = account.73.session_timer.enable = account.73.session_timer.expires = account.73.session_timer.refresher = account.73.enable_user_equal_phone = account.73.srtp_encryption = account.73.ptime = account.73.shared_line = %BWSHAREDLINE-BINARY-73% account.73.register_mac = account.73.register_line = account.73.reg_fail_retry_interval = account.73.reg_failed_retry_min_time = account.73.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.73.conf_type =
account.73.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-73%
account.73.sip_server_type = account.73.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 383 OF 1142
########################################################################## ############# ##DECT V81 Add
account.73.register_expires_overlap = account.73.subscribe_expires_overlap = account.73.auto_dial_enable = account.73.auto_dial_num = account.73.cp_source = account.73.transfer_refer_to_contact_header.enable = #V80 Add account.73.custom_ua = account.73.callpark_enable = account.73.check_cseq.enable = account.73.check_to_tag.enable = account.73.hold_use_inactive = account.73.line_seize.expires = account.73.update_ack_while_dialing = account.73.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.73.always_fwd.enable =
account.73.always_fwd.target =
account.73.always_fwd.off_code =
account.73.always_fwd.on_code =
account.73.busy_fwd.enable =
account.73.busy_fwd.target =
account.73.busy_fwd.off_code =
account.73.busy_fwd.on_code =
account.73.timeout_fwd.enable =
account.73.timeout_fwd.target =
account.73.timeout_fwd.timeout =
account.73.timeout_fwd.off_code =
account.73.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.73.dnd.enable =
account.73.dnd.on_code =
account.73.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.73.reg.enable =
handset.73.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 384 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.73.xsi.user =%BWLOGIN-ID-73% account.73.xsi.password =%XSIPASSWORD-73% account.73.xsi.host =%XSP_ADDRESS% account.73.xsi.server_type = account.73.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.73.ldap.enable =
handset.73.ldap.name_filter=
handset.73.ldap.number_filter=
handset.73.ldap.host=
handset.73.ldap.port=
handset.73.ldap.base=
handset.73.ldap.user=
handset.73.ldap.password=
handset.73.ldap.max_hits=
handset.73.ldap.name_attr=
handset.73.ldap.numb_attr=
handset.73.ldap.display_name=
handset.73.ldap.version=
handset.73.ldap.call_in_lookup=
handset.73.ldap.ldap_sort=
handset.73.ldap.tls_mode=
handset.73.ldap.call_out_lookup=
handset.73.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account74 Settings
##
##########################################################################
#############
account.74.enable=%BWLINE-BINARY-74% account.74.label=%BWEXTENSION-74% account.74.display_name=%BWCLID-74% account.74.auth_name=%BWAUTHUSER-74% account.74.user_name=%BWLINEPORT-74% account.74.password=%BWAUTHPASSWORD-74%
#W80B ADD account.74.sip_server.template = account.74.media_transmit.enable =
account.74.alarm.template = account.74.alarm.server = account.74.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 385 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.74.sip_server.1.failback_mode =
account.74.sip_server.1.failback_timeout =
account.74.sip_server.1.register_on_enable =
account.74.sip_server.1.failback_subscribe.enable =
account.74.sip_server.1.invite_retry_counts =
account.74.sip_server.1.only_signal_with_registered =
account.74.sip_server.2.failback_mode = account.74.sip_server.2.failback_timeout = account.74.sip_server.2.register_on_enable = account.74.sip_server.2.failback_subscribe.enable = account.74.sip_server.2.invite_retry_counts = account.74.sip_server.2.only_signal_with_registered =
account.74.naptr_build = account.74.fallback.redundancy_type = account.74.fallback.timeout =
account.74.dns_cache_type = account.74.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.74.anonymous_call =
account.74.reject_anonymous_call =
account.74.send_anonymous_code =
account.74.anonymous_call_oncode =
account.74.anonymous_call_offcode =
account.74.send_anonymous_rejection_code =
account.74.anonymous_reject_oncode =
account.74.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.74.codec.g722.enable =
account.74.codec.g722.priority =
account.74.codec.g729.enable = account.74.codec.g729.priority =
account.74.codec.g726_16.enable = account.74.codec.g726_16.priority =
account.74.codec.g726_24.enable = account.74.codec.g726_24.priority =
account.74.codec.g726_32.enable = account.74.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 386 OF 1142
account.74.codec.g726_40.enable = account.74.codec.g726_40.priority =
account.74.codec.ilbc.enable = account.74.codec.ilbc.priority =
account.74.codec.pcmu.enable = account.74.codec.pcmu.priority =
account.74.codec.pcma.enable = account.74.codec.pcma.priority =
account.74.codec.opus.enable = account.74.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.74.nat.nat_traversal = account.74.nat.udp_update_enable = account.74.nat.udp_update_time = account.74.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.74.blf.subscribe_period = account.74.dtmf.type = account.74.dtmf.dtmf_payload = account.74.dtmf.info_type = account.74.100rel_enable = account.74.subscribe_register = account.74.subscribe_mwi = account.74.subscribe_mwi_expires = account.74.subscribe_mwi_to_vm = voice_mail.number.74 = %BWVOICE-PORTAL-NUMBER-74% account.74.display_mwi.enable = account.74.cid_source = account.74.cid_source_privacy = account.74.cid_source_ppi = account.74.session_timer.enable = account.74.session_timer.expires = account.74.session_timer.refresher = account.74.enable_user_equal_phone = account.74.srtp_encryption = account.74.ptime = account.74.shared_line = %BWSHAREDLINE-BINARY-74% account.74.register_mac = account.74.register_line = account.74.reg_fail_retry_interval = account.74.reg_failed_retry_min_time = account.74.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 387 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.74.conf_type =
account.74.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-74%
account.74.sip_server_type = account.74.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.74.register_expires_overlap = account.74.subscribe_expires_overlap = account.74.auto_dial_enable = account.74.auto_dial_num = account.74.cp_source = account.74.transfer_refer_to_contact_header.enable = #V80 Add account.74.custom_ua = account.74.callpark_enable = account.74.check_cseq.enable = account.74.check_to_tag.enable = account.74.hold_use_inactive = account.74.line_seize.expires = account.74.update_ack_while_dialing = account.74.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.74.always_fwd.enable =
account.74.always_fwd.target =
account.74.always_fwd.off_code =
account.74.always_fwd.on_code =
account.74.busy_fwd.enable =
account.74.busy_fwd.target =
account.74.busy_fwd.off_code =
account.74.busy_fwd.on_code =
account.74.timeout_fwd.enable =
account.74.timeout_fwd.target =
account.74.timeout_fwd.timeout =
account.74.timeout_fwd.off_code =
account.74.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 388 OF 1142
account.74.dnd.enable = account.74.dnd.on_code = account.74.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.74.reg.enable =
handset.74.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.74.xsi.user =%BWLOGIN-ID-74% account.74.xsi.password =%XSIPASSWORD-74% account.74.xsi.host =%XSP_ADDRESS% account.74.xsi.server_type = account.74.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.74.ldap.enable =
handset.74.ldap.name_filter=
handset.74.ldap.number_filter=
handset.74.ldap.host=
handset.74.ldap.port=
handset.74.ldap.base=
handset.74.ldap.user=
handset.74.ldap.password=
handset.74.ldap.max_hits=
handset.74.ldap.name_attr=
handset.74.ldap.numb_attr=
handset.74.ldap.display_name=
handset.74.ldap.version=
handset.74.ldap.call_in_lookup=
handset.74.ldap.ldap_sort=
handset.74.ldap.tls_mode=
handset.74.ldap.call_out_lookup=
handset.74.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account75 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 389 OF 1142
account.75.enable=%BWLINE-BINARY-75% account.75.label=%BWEXTENSION-75% account.75.display_name=%BWCLID-75% account.75.auth_name=%BWAUTHUSER-75% account.75.user_name=%BWLINEPORT-75% account.75.password=%BWAUTHPASSWORD-75%
#W80B ADD account.75.sip_server.template = account.75.media_transmit.enable =
account.75.alarm.template = account.75.alarm.server = account.75.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.75.sip_server.1.failback_mode =
account.75.sip_server.1.failback_timeout =
account.75.sip_server.1.register_on_enable =
account.75.sip_server.1.failback_subscribe.enable =
account.75.sip_server.1.invite_retry_counts =
account.75.sip_server.1.only_signal_with_registered =
account.75.sip_server.2.failback_mode = account.75.sip_server.2.failback_timeout = account.75.sip_server.2.register_on_enable = account.75.sip_server.2.failback_subscribe.enable = account.75.sip_server.2.invite_retry_counts = account.75.sip_server.2.only_signal_with_registered =
account.75.naptr_build = account.75.fallback.redundancy_type = account.75.fallback.timeout =
account.75.dns_cache_type = account.75.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.75.anonymous_call =
account.75.reject_anonymous_call =
account.75.send_anonymous_code =
account.75.anonymous_call_oncode =
account.75.anonymous_call_offcode =
account.75.send_anonymous_rejection_code =
account.75.anonymous_reject_oncode =
account.75.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 390 OF 1142
########################################################################## ############# account.75.codec.g722.enable = account.75.codec.g722.priority =
account.75.codec.g729.enable = account.75.codec.g729.priority =
account.75.codec.g726_16.enable = account.75.codec.g726_16.priority =
account.75.codec.g726_24.enable = account.75.codec.g726_24.priority =
account.75.codec.g726_32.enable = account.75.codec.g726_32.priority =
account.75.codec.g726_40.enable = account.75.codec.g726_40.priority =
account.75.codec.ilbc.enable = account.75.codec.ilbc.priority =
account.75.codec.pcmu.enable = account.75.codec.pcmu.priority =
account.75.codec.pcma.enable = account.75.codec.pcma.priority =
account.75.codec.opus.enable = account.75.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.75.nat.nat_traversal = account.75.nat.udp_update_enable = account.75.nat.udp_update_time = account.75.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.75.blf.subscribe_period = account.75.dtmf.type = account.75.dtmf.dtmf_payload = account.75.dtmf.info_type = account.75.100rel_enable = account.75.subscribe_register = account.75.subscribe_mwi = account.75.subscribe_mwi_expires = account.75.subscribe_mwi_to_vm = voice_mail.number.75 = %BWVOICE-PORTAL-NUMBER-75% account.75.display_mwi.enable = account.75.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 391 OF 1142
account.75.cid_source_privacy = account.75.cid_source_ppi = account.75.session_timer.enable = account.75.session_timer.expires = account.75.session_timer.refresher = account.75.enable_user_equal_phone = account.75.srtp_encryption = account.75.ptime = account.75.shared_line = %BWSHAREDLINE-BINARY-75% account.75.register_mac = account.75.register_line = account.75.reg_fail_retry_interval = account.75.reg_failed_retry_min_time = account.75.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.75.conf_type =
account.75.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-75%
account.75.sip_server_type = account.75.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.75.register_expires_overlap = account.75.subscribe_expires_overlap = account.75.auto_dial_enable = account.75.auto_dial_num = account.75.cp_source = account.75.transfer_refer_to_contact_header.enable = #V80 Add account.75.custom_ua = account.75.callpark_enable = account.75.check_cseq.enable = account.75.check_to_tag.enable = account.75.hold_use_inactive = account.75.line_seize.expires = account.75.update_ack_while_dialing = account.75.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.75.always_fwd.enable =
account.75.always_fwd.target =
account.75.always_fwd.off_code =
account.75.always_fwd.on_code =
account.75.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 392 OF 1142
account.75.busy_fwd.target = account.75.busy_fwd.off_code = account.75.busy_fwd.on_code = account.75.timeout_fwd.enable = account.75.timeout_fwd.target = account.75.timeout_fwd.timeout = account.75.timeout_fwd.off_code = account.75.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.75.dnd.enable =
account.75.dnd.on_code =
account.75.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.75.reg.enable =
handset.75.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.75.xsi.user =%BWLOGIN-ID-75% account.75.xsi.password =%XSIPASSWORD-75% account.75.xsi.host =%XSP_ADDRESS% account.75.xsi.server_type = account.75.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.75.ldap.enable =
handset.75.ldap.name_filter=
handset.75.ldap.number_filter=
handset.75.ldap.host=
handset.75.ldap.port=
handset.75.ldap.base=
handset.75.ldap.user=
handset.75.ldap.password=
handset.75.ldap.max_hits=
handset.75.ldap.name_attr=
handset.75.ldap.numb_attr=
handset.75.ldap.display_name=
handset.75.ldap.version=
handset.75.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 393 OF 1142
handset.75.ldap.ldap_sort= handset.75.ldap.tls_mode= handset.75.ldap.call_out_lookup= handset.75.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account76 Settings
##
##########################################################################
#############
account.76.enable=%BWLINE-BINARY-76% account.76.label=%BWEXTENSION-76% account.76.display_name=%BWCLID-76% account.76.auth_name=%BWAUTHUSER-76% account.76.user_name=%BWLINEPORT-76% account.76.password=%BWAUTHPASSWORD-76%
#W80B ADD account.76.sip_server.template = account.76.media_transmit.enable =
account.76.alarm.template = account.76.alarm.server = account.76.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.76.sip_server.1.failback_mode =
account.76.sip_server.1.failback_timeout =
account.76.sip_server.1.register_on_enable =
account.76.sip_server.1.failback_subscribe.enable =
account.76.sip_server.1.invite_retry_counts =
account.76.sip_server.1.only_signal_with_registered =
account.76.sip_server.2.failback_mode = account.76.sip_server.2.failback_timeout = account.76.sip_server.2.register_on_enable = account.76.sip_server.2.failback_subscribe.enable = account.76.sip_server.2.invite_retry_counts = account.76.sip_server.2.only_signal_with_registered =
account.76.naptr_build = account.76.fallback.redundancy_type = account.76.fallback.timeout =
account.76.dns_cache_type = account.76.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 394 OF 1142
account.76.anonymous_call = account.76.reject_anonymous_call = account.76.send_anonymous_code = account.76.anonymous_call_oncode = account.76.anonymous_call_offcode = account.76.send_anonymous_rejection_code = account.76.anonymous_reject_oncode = account.76.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.76.codec.g722.enable =
account.76.codec.g722.priority =
account.76.codec.g729.enable = account.76.codec.g729.priority =
account.76.codec.g726_16.enable = account.76.codec.g726_16.priority =
account.76.codec.g726_24.enable = account.76.codec.g726_24.priority =
account.76.codec.g726_32.enable = account.76.codec.g726_32.priority =
account.76.codec.g726_40.enable = account.76.codec.g726_40.priority =
account.76.codec.ilbc.enable = account.76.codec.ilbc.priority =
account.76.codec.pcmu.enable = account.76.codec.pcmu.priority =
account.76.codec.pcma.enable = account.76.codec.pcma.priority =
account.76.codec.opus.enable = account.76.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.76.nat.nat_traversal = account.76.nat.udp_update_enable = account.76.nat.udp_update_time = account.76.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 395 OF 1142
########################################################################## #############
account.76.blf.subscribe_period = account.76.dtmf.type = account.76.dtmf.dtmf_payload = account.76.dtmf.info_type = account.76.100rel_enable = account.76.subscribe_register = account.76.subscribe_mwi = account.76.subscribe_mwi_expires = account.76.subscribe_mwi_to_vm = voice_mail.number.76 = %BWVOICE-PORTAL-NUMBER-76% account.76.display_mwi.enable = account.76.cid_source = account.76.cid_source_privacy = account.76.cid_source_ppi = account.76.session_timer.enable = account.76.session_timer.expires = account.76.session_timer.refresher = account.76.enable_user_equal_phone = account.76.srtp_encryption = account.76.ptime = account.76.shared_line = %BWSHAREDLINE-BINARY-76% account.76.register_mac = account.76.register_line = account.76.reg_fail_retry_interval = account.76.reg_failed_retry_min_time = account.76.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.76.conf_type =
account.76.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-76%
account.76.sip_server_type = account.76.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.76.register_expires_overlap = account.76.subscribe_expires_overlap = account.76.auto_dial_enable = account.76.auto_dial_num = account.76.cp_source = account.76.transfer_refer_to_contact_header.enable = #V80 Add account.76.custom_ua = account.76.callpark_enable = account.76.check_cseq.enable = account.76.check_to_tag.enable = account.76.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 396 OF 1142
account.76.line_seize.expires = account.76.update_ack_while_dialing = account.76.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.76.always_fwd.enable =
account.76.always_fwd.target =
account.76.always_fwd.off_code =
account.76.always_fwd.on_code =
account.76.busy_fwd.enable =
account.76.busy_fwd.target =
account.76.busy_fwd.off_code =
account.76.busy_fwd.on_code =
account.76.timeout_fwd.enable =
account.76.timeout_fwd.target =
account.76.timeout_fwd.timeout =
account.76.timeout_fwd.off_code =
account.76.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.76.dnd.enable =
account.76.dnd.on_code =
account.76.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.76.reg.enable =
handset.76.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.76.xsi.user =%BWLOGIN-ID-76% account.76.xsi.password =%XSIPASSWORD-76% account.76.xsi.host =%XSP_ADDRESS% account.76.xsi.server_type = account.76.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 397 OF 1142
########################################################################## ############# handset.76.ldap.enable = handset.76.ldap.name_filter= handset.76.ldap.number_filter= handset.76.ldap.host= handset.76.ldap.port= handset.76.ldap.base= handset.76.ldap.user= handset.76.ldap.password= handset.76.ldap.max_hits= handset.76.ldap.name_attr= handset.76.ldap.numb_attr= handset.76.ldap.display_name= handset.76.ldap.version= handset.76.ldap.call_in_lookup= handset.76.ldap.ldap_sort= handset.76.ldap.tls_mode= handset.76.ldap.call_out_lookup= handset.76.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account77 Settings
##
##########################################################################
#############
account.77.enable=%BWLINE-BINARY-77% account.77.label=%BWEXTENSION-77% account.77.display_name=%BWCLID-77% account.77.auth_name=%BWAUTHUSER-77% account.77.user_name=%BWLINEPORT-77% account.77.password=%BWAUTHPASSWORD-77%
#W80B ADD account.77.sip_server.template = account.77.media_transmit.enable =
account.77.alarm.template = account.77.alarm.server = account.77.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.77.sip_server.1.failback_mode =
account.77.sip_server.1.failback_timeout =
account.77.sip_server.1.register_on_enable =
account.77.sip_server.1.failback_subscribe.enable =
account.77.sip_server.1.invite_retry_counts =
account.77.sip_server.1.only_signal_with_registered =
account.77.sip_server.2.failback_mode = account.77.sip_server.2.failback_timeout = account.77.sip_server.2.register_on_enable = account.77.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 398 OF 1142
account.77.sip_server.2.invite_retry_counts = account.77.sip_server.2.only_signal_with_registered =
account.77.naptr_build = account.77.fallback.redundancy_type = account.77.fallback.timeout =
account.77.dns_cache_type = account.77.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.77.anonymous_call =
account.77.reject_anonymous_call =
account.77.send_anonymous_code =
account.77.anonymous_call_oncode =
account.77.anonymous_call_offcode =
account.77.send_anonymous_rejection_code =
account.77.anonymous_reject_oncode =
account.77.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.77.codec.g722.enable =
account.77.codec.g722.priority =
account.77.codec.g729.enable = account.77.codec.g729.priority =
account.77.codec.g726_16.enable = account.77.codec.g726_16.priority =
account.77.codec.g726_24.enable = account.77.codec.g726_24.priority =
account.77.codec.g726_32.enable = account.77.codec.g726_32.priority =
account.77.codec.g726_40.enable = account.77.codec.g726_40.priority =
account.77.codec.ilbc.enable = account.77.codec.ilbc.priority =
account.77.codec.pcmu.enable = account.77.codec.pcmu.priority =
account.77.codec.pcma.enable = account.77.codec.pcma.priority =
account.77.codec.opus.enable = account.77.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 399 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.77.nat.nat_traversal = account.77.nat.udp_update_enable = account.77.nat.udp_update_time = account.77.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.77.blf.subscribe_period = account.77.dtmf.type = account.77.dtmf.dtmf_payload = account.77.dtmf.info_type = account.77.100rel_enable = account.77.subscribe_register = account.77.subscribe_mwi = account.77.subscribe_mwi_expires = account.77.subscribe_mwi_to_vm = voice_mail.number.77 = %BWVOICE-PORTAL-NUMBER-77% account.77.display_mwi.enable = account.77.cid_source = account.77.cid_source_privacy = account.77.cid_source_ppi = account.77.session_timer.enable = account.77.session_timer.expires = account.77.session_timer.refresher = account.77.enable_user_equal_phone = account.77.srtp_encryption = account.77.ptime = account.77.shared_line = %BWSHAREDLINE-BINARY-77% account.77.register_mac = account.77.register_line = account.77.reg_fail_retry_interval = account.77.reg_failed_retry_min_time = account.77.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.77.conf_type =
account.77.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-77%
account.77.sip_server_type = account.77.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 400 OF 1142
########################################################################## ############# ##DECT V81 Add
account.77.register_expires_overlap = account.77.subscribe_expires_overlap = account.77.auto_dial_enable = account.77.auto_dial_num = account.77.cp_source = account.77.transfer_refer_to_contact_header.enable = #V80 Add account.77.custom_ua = account.77.callpark_enable = account.77.check_cseq.enable = account.77.check_to_tag.enable = account.77.hold_use_inactive = account.77.line_seize.expires = account.77.update_ack_while_dialing = account.77.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.77.always_fwd.enable =
account.77.always_fwd.target =
account.77.always_fwd.off_code =
account.77.always_fwd.on_code =
account.77.busy_fwd.enable =
account.77.busy_fwd.target =
account.77.busy_fwd.off_code =
account.77.busy_fwd.on_code =
account.77.timeout_fwd.enable =
account.77.timeout_fwd.target =
account.77.timeout_fwd.timeout =
account.77.timeout_fwd.off_code =
account.77.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.77.dnd.enable =
account.77.dnd.on_code =
account.77.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.77.reg.enable =
handset.77.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 401 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.77.xsi.user =%BWLOGIN-ID-77% account.77.xsi.password =%XSIPASSWORD-77% account.77.xsi.host =%XSP_ADDRESS% account.77.xsi.server_type = account.77.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.77.ldap.enable =
handset.77.ldap.name_filter=
handset.77.ldap.number_filter=
handset.77.ldap.host=
handset.77.ldap.port=
handset.77.ldap.base=
handset.77.ldap.user=
handset.77.ldap.password=
handset.77.ldap.max_hits=
handset.77.ldap.name_attr=
handset.77.ldap.numb_attr=
handset.77.ldap.display_name=
handset.77.ldap.version=
handset.77.ldap.call_in_lookup=
handset.77.ldap.ldap_sort=
handset.77.ldap.tls_mode=
handset.77.ldap.call_out_lookup=
handset.77.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account78 Settings
##
##########################################################################
#############
account.78.enable=%BWLINE-BINARY-78% account.78.label=%BWEXTENSION-78% account.78.display_name=%BWCLID-78% account.78.auth_name=%BWAUTHUSER-78% account.78.user_name=%BWLINEPORT-78% account.78.password=%BWAUTHPASSWORD-78%
#W80B ADD account.78.sip_server.template = account.78.media_transmit.enable =
account.78.alarm.template = account.78.alarm.server = account.78.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 402 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.78.sip_server.1.failback_mode =
account.78.sip_server.1.failback_timeout =
account.78.sip_server.1.register_on_enable =
account.78.sip_server.1.failback_subscribe.enable =
account.78.sip_server.1.invite_retry_counts =
account.78.sip_server.1.only_signal_with_registered =
account.78.sip_server.2.failback_mode = account.78.sip_server.2.failback_timeout = account.78.sip_server.2.register_on_enable = account.78.sip_server.2.failback_subscribe.enable = account.78.sip_server.2.invite_retry_counts = account.78.sip_server.2.only_signal_with_registered =
account.78.naptr_build = account.78.fallback.redundancy_type = account.78.fallback.timeout =
account.78.dns_cache_type = account.78.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.78.anonymous_call =
account.78.reject_anonymous_call =
account.78.send_anonymous_code =
account.78.anonymous_call_oncode =
account.78.anonymous_call_offcode =
account.78.send_anonymous_rejection_code =
account.78.anonymous_reject_oncode =
account.78.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.78.codec.g722.enable =
account.78.codec.g722.priority =
account.78.codec.g729.enable = account.78.codec.g729.priority =
account.78.codec.g726_16.enable = account.78.codec.g726_16.priority =
account.78.codec.g726_24.enable = account.78.codec.g726_24.priority =
account.78.codec.g726_32.enable = account.78.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 403 OF 1142
account.78.codec.g726_40.enable = account.78.codec.g726_40.priority =
account.78.codec.ilbc.enable = account.78.codec.ilbc.priority =
account.78.codec.pcmu.enable = account.78.codec.pcmu.priority =
account.78.codec.pcma.enable = account.78.codec.pcma.priority =
account.78.codec.opus.enable = account.78.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.78.nat.nat_traversal = account.78.nat.udp_update_enable = account.78.nat.udp_update_time = account.78.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.78.blf.subscribe_period = account.78.dtmf.type = account.78.dtmf.dtmf_payload = account.78.dtmf.info_type = account.78.100rel_enable = account.78.subscribe_register = account.78.subscribe_mwi = account.78.subscribe_mwi_expires = account.78.subscribe_mwi_to_vm = voice_mail.number.78 = %BWVOICE-PORTAL-NUMBER-78% account.78.display_mwi.enable = account.78.cid_source = account.78.cid_source_privacy = account.78.cid_source_ppi = account.78.session_timer.enable = account.78.session_timer.expires = account.78.session_timer.refresher = account.78.enable_user_equal_phone = account.78.srtp_encryption = account.78.ptime = account.78.shared_line = %BWSHAREDLINE-BINARY-78% account.78.register_mac = account.78.register_line = account.78.reg_fail_retry_interval = account.78.reg_failed_retry_min_time = account.78.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 404 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.78.conf_type =
account.78.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-78%
account.78.sip_server_type = account.78.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.78.register_expires_overlap = account.78.subscribe_expires_overlap = account.78.auto_dial_enable = account.78.auto_dial_num = account.78.cp_source = account.78.transfer_refer_to_contact_header.enable = #V80 Add account.78.custom_ua = account.78.callpark_enable = account.78.check_cseq.enable = account.78.check_to_tag.enable = account.78.hold_use_inactive = account.78.line_seize.expires = account.78.update_ack_while_dialing = account.78.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.78.always_fwd.enable =
account.78.always_fwd.target =
account.78.always_fwd.off_code =
account.78.always_fwd.on_code =
account.78.busy_fwd.enable =
account.78.busy_fwd.target =
account.78.busy_fwd.off_code =
account.78.busy_fwd.on_code =
account.78.timeout_fwd.enable =
account.78.timeout_fwd.target =
account.78.timeout_fwd.timeout =
account.78.timeout_fwd.off_code =
account.78.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 405 OF 1142
account.78.dnd.enable = account.78.dnd.on_code = account.78.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.78.reg.enable =
handset.78.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.78.xsi.user =%BWLOGIN-ID-78% account.78.xsi.password =%XSIPASSWORD-78% account.78.xsi.host =%XSP_ADDRESS% account.78.xsi.server_type = account.78.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.78.ldap.enable =
handset.78.ldap.name_filter=
handset.78.ldap.number_filter=
handset.78.ldap.host=
handset.78.ldap.port=
handset.78.ldap.base=
handset.78.ldap.user=
handset.78.ldap.password=
handset.78.ldap.max_hits=
handset.78.ldap.name_attr=
handset.78.ldap.numb_attr=
handset.78.ldap.display_name=
handset.78.ldap.version=
handset.78.ldap.call_in_lookup=
handset.78.ldap.ldap_sort=
handset.78.ldap.tls_mode=
handset.78.ldap.call_out_lookup=
handset.78.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account79 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 406 OF 1142
account.79.enable=%BWLINE-BINARY-79% account.79.label=%BWEXTENSION-79% account.79.display_name=%BWCLID-79% account.79.auth_name=%BWAUTHUSER-79% account.79.user_name=%BWLINEPORT-79% account.79.password=%BWAUTHPASSWORD-79%
#W80B ADD account.79.sip_server.template = account.79.media_transmit.enable =
account.79.alarm.template = account.79.alarm.server = account.79.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.79.sip_server.1.failback_mode =
account.79.sip_server.1.failback_timeout =
account.79.sip_server.1.register_on_enable =
account.79.sip_server.1.failback_subscribe.enable =
account.79.sip_server.1.invite_retry_counts =
account.79.sip_server.1.only_signal_with_registered =
account.79.sip_server.2.failback_mode = account.79.sip_server.2.failback_timeout = account.79.sip_server.2.register_on_enable = account.79.sip_server.2.failback_subscribe.enable = account.79.sip_server.2.invite_retry_counts = account.79.sip_server.2.only_signal_with_registered =
account.79.naptr_build = account.79.fallback.redundancy_type = account.79.fallback.timeout =
account.79.dns_cache_type = account.79.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.79.anonymous_call =
account.79.reject_anonymous_call =
account.79.send_anonymous_code =
account.79.anonymous_call_oncode =
account.79.anonymous_call_offcode =
account.79.send_anonymous_rejection_code =
account.79.anonymous_reject_oncode =
account.79.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 407 OF 1142
########################################################################## ############# account.79.codec.g722.enable = account.79.codec.g722.priority =
account.79.codec.g729.enable = account.79.codec.g729.priority =
account.79.codec.g726_16.enable = account.79.codec.g726_16.priority =
account.79.codec.g726_24.enable = account.79.codec.g726_24.priority =
account.79.codec.g726_32.enable = account.79.codec.g726_32.priority =
account.79.codec.g726_40.enable = account.79.codec.g726_40.priority =
account.79.codec.ilbc.enable = account.79.codec.ilbc.priority =
account.79.codec.pcmu.enable = account.79.codec.pcmu.priority =
account.79.codec.pcma.enable = account.79.codec.pcma.priority =
account.79.codec.opus.enable = account.79.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.79.nat.nat_traversal = account.79.nat.udp_update_enable = account.79.nat.udp_update_time = account.79.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.79.blf.subscribe_period = account.79.dtmf.type = account.79.dtmf.dtmf_payload = account.79.dtmf.info_type = account.79.100rel_enable = account.79.subscribe_register = account.79.subscribe_mwi = account.79.subscribe_mwi_expires = account.79.subscribe_mwi_to_vm = voice_mail.number.79 = %BWVOICE-PORTAL-NUMBER-79% account.79.display_mwi.enable = account.79.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 408 OF 1142
account.79.cid_source_privacy = account.79.cid_source_ppi = account.79.session_timer.enable = account.79.session_timer.expires = account.79.session_timer.refresher = account.79.enable_user_equal_phone = account.79.srtp_encryption = account.79.ptime = account.79.shared_line = %BWSHAREDLINE-BINARY-79% account.79.register_mac = account.79.register_line = account.79.reg_fail_retry_interval = account.79.reg_failed_retry_min_time = account.79.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.79.conf_type =
account.79.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-79%
account.79.sip_server_type = account.79.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.79.register_expires_overlap = account.79.subscribe_expires_overlap = account.79.auto_dial_enable = account.79.auto_dial_num = account.79.cp_source = account.79.transfer_refer_to_contact_header.enable = #V80 Add account.79.custom_ua = account.79.callpark_enable = account.79.check_cseq.enable = account.79.check_to_tag.enable = account.79.hold_use_inactive = account.79.line_seize.expires = account.79.update_ack_while_dialing = account.79.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.79.always_fwd.enable =
account.79.always_fwd.target =
account.79.always_fwd.off_code =
account.79.always_fwd.on_code =
account.79.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 409 OF 1142
account.79.busy_fwd.target = account.79.busy_fwd.off_code = account.79.busy_fwd.on_code = account.79.timeout_fwd.enable = account.79.timeout_fwd.target = account.79.timeout_fwd.timeout = account.79.timeout_fwd.off_code = account.79.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.79.dnd.enable =
account.79.dnd.on_code =
account.79.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.79.reg.enable =
handset.79.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.79.xsi.user =%BWLOGIN-ID-79% account.79.xsi.password =%XSIPASSWORD-79% account.79.xsi.host =%XSP_ADDRESS% account.79.xsi.server_type = account.79.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.79.ldap.enable =
handset.79.ldap.name_filter=
handset.79.ldap.number_filter=
handset.79.ldap.host=
handset.79.ldap.port=
handset.79.ldap.base=
handset.79.ldap.user=
handset.79.ldap.password=
handset.79.ldap.max_hits=
handset.79.ldap.name_attr=
handset.79.ldap.numb_attr=
handset.79.ldap.display_name=
handset.79.ldap.version=
handset.79.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 410 OF 1142
handset.79.ldap.ldap_sort= handset.79.ldap.tls_mode= handset.79.ldap.call_out_lookup= handset.79.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account80 Settings
##
##########################################################################
#############
account.80.enable=%BWLINE-BINARY-80% account.80.label=%BWEXTENSION-80% account.80.display_name=%BWCLID-80% account.80.auth_name=%BWAUTHUSER-80% account.80.user_name=%BWLINEPORT-80% account.80.password=%BWAUTHPASSWORD-80%
#W80B ADD account.80.sip_server.template = account.80.media_transmit.enable =
account.80.alarm.template = account.80.alarm.server = account.80.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.80.sip_server.1.failback_mode =
account.80.sip_server.1.failback_timeout =
account.80.sip_server.1.register_on_enable =
account.80.sip_server.1.failback_subscribe.enable =
account.80.sip_server.1.invite_retry_counts =
account.80.sip_server.1.only_signal_with_registered =
account.80.sip_server.2.failback_mode = account.80.sip_server.2.failback_timeout = account.80.sip_server.2.register_on_enable = account.80.sip_server.2.failback_subscribe.enable = account.80.sip_server.2.invite_retry_counts = account.80.sip_server.2.only_signal_with_registered =
account.80.naptr_build = account.80.fallback.redundancy_type = account.80.fallback.timeout =
account.80.dns_cache_type = account.80.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 411 OF 1142
account.80.anonymous_call = account.80.reject_anonymous_call = account.80.send_anonymous_code = account.80.anonymous_call_oncode = account.80.anonymous_call_offcode = account.80.send_anonymous_rejection_code = account.80.anonymous_reject_oncode = account.80.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.80.codec.g722.enable =
account.80.codec.g722.priority =
account.80.codec.g729.enable = account.80.codec.g729.priority =
account.80.codec.g726_16.enable = account.80.codec.g726_16.priority =
account.80.codec.g726_24.enable = account.80.codec.g726_24.priority =
account.80.codec.g726_32.enable = account.80.codec.g726_32.priority =
account.80.codec.g726_40.enable = account.80.codec.g726_40.priority =
account.80.codec.ilbc.enable = account.80.codec.ilbc.priority =
account.80.codec.pcmu.enable = account.80.codec.pcmu.priority =
account.80.codec.pcma.enable = account.80.codec.pcma.priority =
account.80.codec.opus.enable = account.80.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.80.nat.nat_traversal = account.80.nat.udp_update_enable = account.80.nat.udp_update_time = account.80.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 412 OF 1142
########################################################################## #############
account.80.blf.subscribe_period = account.80.dtmf.type = account.80.dtmf.dtmf_payload = account.80.dtmf.info_type = account.80.100rel_enable = account.80.subscribe_register = account.80.subscribe_mwi = account.80.subscribe_mwi_expires = account.80.subscribe_mwi_to_vm = voice_mail.number.80 = %BWVOICE-PORTAL-NUMBER-80% account.80.display_mwi.enable = account.80.cid_source = account.80.cid_source_privacy = account.80.cid_source_ppi = account.80.session_timer.enable = account.80.session_timer.expires = account.80.session_timer.refresher = account.80.enable_user_equal_phone = account.80.srtp_encryption = account.80.ptime = account.80.shared_line = %BWSHAREDLINE-BINARY-80% account.80.register_mac = account.80.register_line = account.80.reg_fail_retry_interval = account.80.reg_failed_retry_min_time = account.80.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.80.conf_type =
account.80.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-80%
account.80.sip_server_type = account.80.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.80.register_expires_overlap = account.80.subscribe_expires_overlap = account.80.auto_dial_enable = account.80.auto_dial_num = account.80.cp_source = account.80.transfer_refer_to_contact_header.enable = #V80 Add account.80.custom_ua = account.80.callpark_enable = account.80.check_cseq.enable = account.80.check_to_tag.enable = account.80.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 413 OF 1142
account.80.line_seize.expires = account.80.update_ack_while_dialing = account.80.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.80.always_fwd.enable =
account.80.always_fwd.target =
account.80.always_fwd.off_code =
account.80.always_fwd.on_code =
account.80.busy_fwd.enable =
account.80.busy_fwd.target =
account.80.busy_fwd.off_code =
account.80.busy_fwd.on_code =
account.80.timeout_fwd.enable =
account.80.timeout_fwd.target =
account.80.timeout_fwd.timeout =
account.80.timeout_fwd.off_code =
account.80.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.80.dnd.enable =
account.80.dnd.on_code =
account.80.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.80.reg.enable =
handset.80.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.80.xsi.user =%BWLOGIN-ID-80% account.80.xsi.password =%XSIPASSWORD-80% account.80.xsi.host =%XSP_ADDRESS% account.80.xsi.server_type = account.80.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 414 OF 1142
########################################################################## ############# handset.80.ldap.enable = handset.80.ldap.name_filter= handset.80.ldap.number_filter= handset.80.ldap.host= handset.80.ldap.port= handset.80.ldap.base= handset.80.ldap.user= handset.80.ldap.password= handset.80.ldap.max_hits= handset.80.ldap.name_attr= handset.80.ldap.numb_attr= handset.80.ldap.display_name= handset.80.ldap.version= handset.80.ldap.call_in_lookup= handset.80.ldap.ldap_sort= handset.80.ldap.tls_mode= handset.80.ldap.call_out_lookup= handset.80.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account81 Settings
##
##########################################################################
#############
account.81.enable=%BWLINE-BINARY-81% account.81.label=%BWEXTENSION-81% account.81.display_name=%BWCLID-81% account.81.auth_name=%BWAUTHUSER-81% account.81.user_name=%BWLINEPORT-81% account.81.password=%BWAUTHPASSWORD-81%
#W80B ADD account.81.sip_server.template = account.81.media_transmit.enable =
account.81.alarm.template = account.81.alarm.server = account.81.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.81.sip_server.1.failback_mode =
account.81.sip_server.1.failback_timeout =
account.81.sip_server.1.register_on_enable =
account.81.sip_server.1.failback_subscribe.enable =
account.81.sip_server.1.invite_retry_counts =
account.81.sip_server.1.only_signal_with_registered =
account.81.sip_server.2.failback_mode = account.81.sip_server.2.failback_timeout = account.81.sip_server.2.register_on_enable = account.81.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 415 OF 1142
account.81.sip_server.2.invite_retry_counts = account.81.sip_server.2.only_signal_with_registered =
account.81.naptr_build = account.81.fallback.redundancy_type = account.81.fallback.timeout =
account.81.dns_cache_type = account.81.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.81.anonymous_call =
account.81.reject_anonymous_call =
account.81.send_anonymous_code =
account.81.anonymous_call_oncode =
account.81.anonymous_call_offcode =
account.81.send_anonymous_rejection_code =
account.81.anonymous_reject_oncode =
account.81.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.81.codec.g722.enable =
account.81.codec.g722.priority =
account.81.codec.g729.enable = account.81.codec.g729.priority =
account.81.codec.g726_16.enable = account.81.codec.g726_16.priority =
account.81.codec.g726_24.enable = account.81.codec.g726_24.priority =
account.81.codec.g726_32.enable = account.81.codec.g726_32.priority =
account.81.codec.g726_40.enable = account.81.codec.g726_40.priority =
account.81.codec.ilbc.enable = account.81.codec.ilbc.priority =
account.81.codec.pcmu.enable = account.81.codec.pcmu.priority =
account.81.codec.pcma.enable = account.81.codec.pcma.priority =
account.81.codec.opus.enable = account.81.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 416 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.81.nat.nat_traversal = account.81.nat.udp_update_enable = account.81.nat.udp_update_time = account.81.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.81.blf.subscribe_period = account.81.dtmf.type = account.81.dtmf.dtmf_payload = account.81.dtmf.info_type = account.81.100rel_enable = account.81.subscribe_register = account.81.subscribe_mwi = account.81.subscribe_mwi_expires = account.81.subscribe_mwi_to_vm = voice_mail.number.81 = %BWVOICE-PORTAL-NUMBER-81% account.81.display_mwi.enable = account.81.cid_source = account.81.cid_source_privacy = account.81.cid_source_ppi = account.81.session_timer.enable = account.81.session_timer.expires = account.81.session_timer.refresher = account.81.enable_user_equal_phone = account.81.srtp_encryption = account.81.ptime = account.81.shared_line = %BWSHAREDLINE-BINARY-81% account.81.register_mac = account.81.register_line = account.81.reg_fail_retry_interval = account.81.reg_failed_retry_min_time = account.81.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.81.conf_type =
account.81.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-81%
account.81.sip_server_type = account.81.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 417 OF 1142
########################################################################## ############# ##DECT V81 Add
account.81.register_expires_overlap = account.81.subscribe_expires_overlap = account.81.auto_dial_enable = account.81.auto_dial_num = account.81.cp_source = account.81.transfer_refer_to_contact_header.enable = #V80 Add account.81.custom_ua = account.81.callpark_enable = account.81.check_cseq.enable = account.81.check_to_tag.enable = account.81.hold_use_inactive = account.81.line_seize.expires = account.81.update_ack_while_dialing = account.81.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.81.always_fwd.enable =
account.81.always_fwd.target =
account.81.always_fwd.off_code =
account.81.always_fwd.on_code =
account.81.busy_fwd.enable =
account.81.busy_fwd.target =
account.81.busy_fwd.off_code =
account.81.busy_fwd.on_code =
account.81.timeout_fwd.enable =
account.81.timeout_fwd.target =
account.81.timeout_fwd.timeout =
account.81.timeout_fwd.off_code =
account.81.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.81.dnd.enable =
account.81.dnd.on_code =
account.81.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.81.reg.enable =
handset.81.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 418 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.81.xsi.user =%BWLOGIN-ID-81% account.81.xsi.password =%XSIPASSWORD-81% account.81.xsi.host =%XSP_ADDRESS% account.81.xsi.server_type = account.81.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.81.ldap.enable =
handset.81.ldap.name_filter=
handset.81.ldap.number_filter=
handset.81.ldap.host=
handset.81.ldap.port=
handset.81.ldap.base=
handset.81.ldap.user=
handset.81.ldap.password=
handset.81.ldap.max_hits=
handset.81.ldap.name_attr=
handset.81.ldap.numb_attr=
handset.81.ldap.display_name=
handset.81.ldap.version=
handset.81.ldap.call_in_lookup=
handset.81.ldap.ldap_sort=
handset.81.ldap.tls_mode=
handset.81.ldap.call_out_lookup=
handset.81.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account82 Settings
##
##########################################################################
#############
account.82.enable=%BWLINE-BINARY-82% account.82.label=%BWEXTENSION-82% account.82.display_name=%BWCLID-82% account.82.auth_name=%BWAUTHUSER-82% account.82.user_name=%BWLINEPORT-82% account.82.password=%BWAUTHPASSWORD-82%
#W80B ADD account.82.sip_server.template = account.82.media_transmit.enable =
account.82.alarm.template = account.82.alarm.server = account.82.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 419 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.82.sip_server.1.failback_mode =
account.82.sip_server.1.failback_timeout =
account.82.sip_server.1.register_on_enable =
account.82.sip_server.1.failback_subscribe.enable =
account.82.sip_server.1.invite_retry_counts =
account.82.sip_server.1.only_signal_with_registered =
account.82.sip_server.2.failback_mode = account.82.sip_server.2.failback_timeout = account.82.sip_server.2.register_on_enable = account.82.sip_server.2.failback_subscribe.enable = account.82.sip_server.2.invite_retry_counts = account.82.sip_server.2.only_signal_with_registered =
account.82.naptr_build = account.82.fallback.redundancy_type = account.82.fallback.timeout =
account.82.dns_cache_type = account.82.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.82.anonymous_call =
account.82.reject_anonymous_call =
account.82.send_anonymous_code =
account.82.anonymous_call_oncode =
account.82.anonymous_call_offcode =
account.82.send_anonymous_rejection_code =
account.82.anonymous_reject_oncode =
account.82.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.82.codec.g722.enable =
account.82.codec.g722.priority =
account.82.codec.g729.enable = account.82.codec.g729.priority =
account.82.codec.g726_16.enable = account.82.codec.g726_16.priority =
account.82.codec.g726_24.enable = account.82.codec.g726_24.priority =
account.82.codec.g726_32.enable = account.82.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 420 OF 1142
account.82.codec.g726_40.enable = account.82.codec.g726_40.priority =
account.82.codec.ilbc.enable = account.82.codec.ilbc.priority =
account.82.codec.pcmu.enable = account.82.codec.pcmu.priority =
account.82.codec.pcma.enable = account.82.codec.pcma.priority =
account.82.codec.opus.enable = account.82.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.82.nat.nat_traversal = account.82.nat.udp_update_enable = account.82.nat.udp_update_time = account.82.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.82.blf.subscribe_period = account.82.dtmf.type = account.82.dtmf.dtmf_payload = account.82.dtmf.info_type = account.82.100rel_enable = account.82.subscribe_register = account.82.subscribe_mwi = account.82.subscribe_mwi_expires = account.82.subscribe_mwi_to_vm = voice_mail.number.82 = %BWVOICE-PORTAL-NUMBER-82% account.82.display_mwi.enable = account.82.cid_source = account.82.cid_source_privacy = account.82.cid_source_ppi = account.82.session_timer.enable = account.82.session_timer.expires = account.82.session_timer.refresher = account.82.enable_user_equal_phone = account.82.srtp_encryption = account.82.ptime = account.82.shared_line = %BWSHAREDLINE-BINARY-82% account.82.register_mac = account.82.register_line = account.82.reg_fail_retry_interval = account.82.reg_failed_retry_min_time = account.82.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 421 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.82.conf_type =
account.82.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-82%
account.82.sip_server_type = account.82.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.82.register_expires_overlap = account.82.subscribe_expires_overlap = account.82.auto_dial_enable = account.82.auto_dial_num = account.82.cp_source = account.82.transfer_refer_to_contact_header.enable = #V80 Add account.82.custom_ua = account.82.callpark_enable = account.82.check_cseq.enable = account.82.check_to_tag.enable = account.82.hold_use_inactive = account.82.line_seize.expires = account.82.update_ack_while_dialing = account.82.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.82.always_fwd.enable =
account.82.always_fwd.target =
account.82.always_fwd.off_code =
account.82.always_fwd.on_code =
account.82.busy_fwd.enable =
account.82.busy_fwd.target =
account.82.busy_fwd.off_code =
account.82.busy_fwd.on_code =
account.82.timeout_fwd.enable =
account.82.timeout_fwd.target =
account.82.timeout_fwd.timeout =
account.82.timeout_fwd.off_code =
account.82.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 422 OF 1142
account.82.dnd.enable = account.82.dnd.on_code = account.82.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.82.reg.enable =
handset.82.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.82.xsi.user =%BWLOGIN-ID-82% account.82.xsi.password =%XSIPASSWORD-82% account.82.xsi.host =%XSP_ADDRESS% account.82.xsi.server_type = account.82.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.82.ldap.enable =
handset.82.ldap.name_filter=
handset.82.ldap.number_filter=
handset.82.ldap.host=
handset.82.ldap.port=
handset.82.ldap.base=
handset.82.ldap.user=
handset.82.ldap.password=
handset.82.ldap.max_hits=
handset.82.ldap.name_attr=
handset.82.ldap.numb_attr=
handset.82.ldap.display_name=
handset.82.ldap.version=
handset.82.ldap.call_in_lookup=
handset.82.ldap.ldap_sort=
handset.82.ldap.tls_mode=
handset.82.ldap.call_out_lookup=
handset.82.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account83 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 423 OF 1142
account.83.enable=%BWLINE-BINARY-83% account.83.label=%BWEXTENSION-83% account.83.display_name=%BWCLID-83% account.83.auth_name=%BWAUTHUSER-83% account.83.user_name=%BWLINEPORT-83% account.83.password=%BWAUTHPASSWORD-83%
#W80B ADD account.83.sip_server.template = account.83.media_transmit.enable =
account.83.alarm.template = account.83.alarm.server = account.83.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.83.sip_server.1.failback_mode =
account.83.sip_server.1.failback_timeout =
account.83.sip_server.1.register_on_enable =
account.83.sip_server.1.failback_subscribe.enable =
account.83.sip_server.1.invite_retry_counts =
account.83.sip_server.1.only_signal_with_registered =
account.83.sip_server.2.failback_mode = account.83.sip_server.2.failback_timeout = account.83.sip_server.2.register_on_enable = account.83.sip_server.2.failback_subscribe.enable = account.83.sip_server.2.invite_retry_counts = account.83.sip_server.2.only_signal_with_registered =
account.83.naptr_build = account.83.fallback.redundancy_type = account.83.fallback.timeout =
account.83.dns_cache_type = account.83.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.83.anonymous_call =
account.83.reject_anonymous_call =
account.83.send_anonymous_code =
account.83.anonymous_call_oncode =
account.83.anonymous_call_offcode =
account.83.send_anonymous_rejection_code =
account.83.anonymous_reject_oncode =
account.83.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 424 OF 1142
########################################################################## ############# account.83.codec.g722.enable = account.83.codec.g722.priority =
account.83.codec.g729.enable = account.83.codec.g729.priority =
account.83.codec.g726_16.enable = account.83.codec.g726_16.priority =
account.83.codec.g726_24.enable = account.83.codec.g726_24.priority =
account.83.codec.g726_32.enable = account.83.codec.g726_32.priority =
account.83.codec.g726_40.enable = account.83.codec.g726_40.priority =
account.83.codec.ilbc.enable = account.83.codec.ilbc.priority =
account.83.codec.pcmu.enable = account.83.codec.pcmu.priority =
account.83.codec.pcma.enable = account.83.codec.pcma.priority =
account.83.codec.opus.enable = account.83.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.83.nat.nat_traversal = account.83.nat.udp_update_enable = account.83.nat.udp_update_time = account.83.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.83.blf.subscribe_period = account.83.dtmf.type = account.83.dtmf.dtmf_payload = account.83.dtmf.info_type = account.83.100rel_enable = account.83.subscribe_register = account.83.subscribe_mwi = account.83.subscribe_mwi_expires = account.83.subscribe_mwi_to_vm = voice_mail.number.83 = %BWVOICE-PORTAL-NUMBER-83% account.83.display_mwi.enable = account.83.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 425 OF 1142
account.83.cid_source_privacy = account.83.cid_source_ppi = account.83.session_timer.enable = account.83.session_timer.expires = account.83.session_timer.refresher = account.83.enable_user_equal_phone = account.83.srtp_encryption = account.83.ptime = account.83.shared_line = %BWSHAREDLINE-BINARY-83% account.83.register_mac = account.83.register_line = account.83.reg_fail_retry_interval = account.83.reg_failed_retry_min_time = account.83.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.83.conf_type =
account.83.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-83%
account.83.sip_server_type = account.83.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.83.register_expires_overlap = account.83.subscribe_expires_overlap = account.83.auto_dial_enable = account.83.auto_dial_num = account.83.cp_source = account.83.transfer_refer_to_contact_header.enable = #V80 Add account.83.custom_ua = account.83.callpark_enable = account.83.check_cseq.enable = account.83.check_to_tag.enable = account.83.hold_use_inactive = account.83.line_seize.expires = account.83.update_ack_while_dialing = account.83.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.83.always_fwd.enable =
account.83.always_fwd.target =
account.83.always_fwd.off_code =
account.83.always_fwd.on_code =
account.83.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 426 OF 1142
account.83.busy_fwd.target = account.83.busy_fwd.off_code = account.83.busy_fwd.on_code = account.83.timeout_fwd.enable = account.83.timeout_fwd.target = account.83.timeout_fwd.timeout = account.83.timeout_fwd.off_code = account.83.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.83.dnd.enable =
account.83.dnd.on_code =
account.83.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.83.reg.enable =
handset.83.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.83.xsi.user =%BWLOGIN-ID-83% account.83.xsi.password =%XSIPASSWORD-83% account.83.xsi.host =%XSP_ADDRESS% account.83.xsi.server_type = account.83.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.83.ldap.enable =
handset.83.ldap.name_filter=
handset.83.ldap.number_filter=
handset.83.ldap.host=
handset.83.ldap.port=
handset.83.ldap.base=
handset.83.ldap.user=
handset.83.ldap.password=
handset.83.ldap.max_hits=
handset.83.ldap.name_attr=
handset.83.ldap.numb_attr=
handset.83.ldap.display_name=
handset.83.ldap.version=
handset.83.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 427 OF 1142
handset.83.ldap.ldap_sort= handset.83.ldap.tls_mode= handset.83.ldap.call_out_lookup= handset.83.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account84 Settings
##
##########################################################################
#############
account.84.enable=%BWLINE-BINARY-84% account.84.label=%BWEXTENSION-84% account.84.display_name=%BWCLID-84% account.84.auth_name=%BWAUTHUSER-84% account.84.user_name=%BWLINEPORT-84% account.84.password=%BWAUTHPASSWORD-84%
#W80B ADD account.84.sip_server.template = account.84.media_transmit.enable =
account.84.alarm.template = account.84.alarm.server = account.84.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.84.sip_server.1.failback_mode =
account.84.sip_server.1.failback_timeout =
account.84.sip_server.1.register_on_enable =
account.84.sip_server.1.failback_subscribe.enable =
account.84.sip_server.1.invite_retry_counts =
account.84.sip_server.1.only_signal_with_registered =
account.84.sip_server.2.failback_mode = account.84.sip_server.2.failback_timeout = account.84.sip_server.2.register_on_enable = account.84.sip_server.2.failback_subscribe.enable = account.84.sip_server.2.invite_retry_counts = account.84.sip_server.2.only_signal_with_registered =
account.84.naptr_build = account.84.fallback.redundancy_type = account.84.fallback.timeout =
account.84.dns_cache_type = account.84.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 428 OF 1142
account.84.anonymous_call = account.84.reject_anonymous_call = account.84.send_anonymous_code = account.84.anonymous_call_oncode = account.84.anonymous_call_offcode = account.84.send_anonymous_rejection_code = account.84.anonymous_reject_oncode = account.84.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.84.codec.g722.enable =
account.84.codec.g722.priority =
account.84.codec.g729.enable = account.84.codec.g729.priority =
account.84.codec.g726_16.enable = account.84.codec.g726_16.priority =
account.84.codec.g726_24.enable = account.84.codec.g726_24.priority =
account.84.codec.g726_32.enable = account.84.codec.g726_32.priority =
account.84.codec.g726_40.enable = account.84.codec.g726_40.priority =
account.84.codec.ilbc.enable = account.84.codec.ilbc.priority =
account.84.codec.pcmu.enable = account.84.codec.pcmu.priority =
account.84.codec.pcma.enable = account.84.codec.pcma.priority =
account.84.codec.opus.enable = account.84.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.84.nat.nat_traversal = account.84.nat.udp_update_enable = account.84.nat.udp_update_time = account.84.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 429 OF 1142
########################################################################## #############
account.84.blf.subscribe_period = account.84.dtmf.type = account.84.dtmf.dtmf_payload = account.84.dtmf.info_type = account.84.100rel_enable = account.84.subscribe_register = account.84.subscribe_mwi = account.84.subscribe_mwi_expires = account.84.subscribe_mwi_to_vm = voice_mail.number.84 = %BWVOICE-PORTAL-NUMBER-84% account.84.display_mwi.enable = account.84.cid_source = account.84.cid_source_privacy = account.84.cid_source_ppi = account.84.session_timer.enable = account.84.session_timer.expires = account.84.session_timer.refresher = account.84.enable_user_equal_phone = account.84.srtp_encryption = account.84.ptime = account.84.shared_line = %BWSHAREDLINE-BINARY-84% account.84.register_mac = account.84.register_line = account.84.reg_fail_retry_interval = account.84.reg_failed_retry_min_time = account.84.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.84.conf_type =
account.84.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-84%
account.84.sip_server_type = account.84.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.84.register_expires_overlap = account.84.subscribe_expires_overlap = account.84.auto_dial_enable = account.84.auto_dial_num = account.84.cp_source = account.84.transfer_refer_to_contact_header.enable = #V80 Add account.84.custom_ua = account.84.callpark_enable = account.84.check_cseq.enable = account.84.check_to_tag.enable = account.84.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 430 OF 1142
account.84.line_seize.expires = account.84.update_ack_while_dialing = account.84.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.84.always_fwd.enable =
account.84.always_fwd.target =
account.84.always_fwd.off_code =
account.84.always_fwd.on_code =
account.84.busy_fwd.enable =
account.84.busy_fwd.target =
account.84.busy_fwd.off_code =
account.84.busy_fwd.on_code =
account.84.timeout_fwd.enable =
account.84.timeout_fwd.target =
account.84.timeout_fwd.timeout =
account.84.timeout_fwd.off_code =
account.84.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.84.dnd.enable =
account.84.dnd.on_code =
account.84.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.84.reg.enable =
handset.84.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.84.xsi.user =%BWLOGIN-ID-84% account.84.xsi.password =%XSIPASSWORD-84% account.84.xsi.host =%XSP_ADDRESS% account.84.xsi.server_type = account.84.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 431 OF 1142
########################################################################## ############# handset.84.ldap.enable = handset.84.ldap.name_filter= handset.84.ldap.number_filter= handset.84.ldap.host= handset.84.ldap.port= handset.84.ldap.base= handset.84.ldap.user= handset.84.ldap.password= handset.84.ldap.max_hits= handset.84.ldap.name_attr= handset.84.ldap.numb_attr= handset.84.ldap.display_name= handset.84.ldap.version= handset.84.ldap.call_in_lookup= handset.84.ldap.ldap_sort= handset.84.ldap.tls_mode= handset.84.ldap.call_out_lookup= handset.84.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account85 Settings
##
##########################################################################
#############
account.85.enable=%BWLINE-BINARY-85% account.85.label=%BWEXTENSION-85% account.85.display_name=%BWCLID-85% account.85.auth_name=%BWAUTHUSER-85% account.85.user_name=%BWLINEPORT-85% account.85.password=%BWAUTHPASSWORD-85%
#W80B ADD account.85.sip_server.template = account.85.media_transmit.enable =
account.85.alarm.template = account.85.alarm.server = account.85.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.85.sip_server.1.failback_mode =
account.85.sip_server.1.failback_timeout =
account.85.sip_server.1.register_on_enable =
account.85.sip_server.1.failback_subscribe.enable =
account.85.sip_server.1.invite_retry_counts =
account.85.sip_server.1.only_signal_with_registered =
account.85.sip_server.2.failback_mode = account.85.sip_server.2.failback_timeout = account.85.sip_server.2.register_on_enable = account.85.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 432 OF 1142
account.85.sip_server.2.invite_retry_counts = account.85.sip_server.2.only_signal_with_registered =
account.85.naptr_build = account.85.fallback.redundancy_type = account.85.fallback.timeout =
account.85.dns_cache_type = account.85.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.85.anonymous_call =
account.85.reject_anonymous_call =
account.85.send_anonymous_code =
account.85.anonymous_call_oncode =
account.85.anonymous_call_offcode =
account.85.send_anonymous_rejection_code =
account.85.anonymous_reject_oncode =
account.85.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.85.codec.g722.enable =
account.85.codec.g722.priority =
account.85.codec.g729.enable = account.85.codec.g729.priority =
account.85.codec.g726_16.enable = account.85.codec.g726_16.priority =
account.85.codec.g726_24.enable = account.85.codec.g726_24.priority =
account.85.codec.g726_32.enable = account.85.codec.g726_32.priority =
account.85.codec.g726_40.enable = account.85.codec.g726_40.priority =
account.85.codec.ilbc.enable = account.85.codec.ilbc.priority =
account.85.codec.pcmu.enable = account.85.codec.pcmu.priority =
account.85.codec.pcma.enable = account.85.codec.pcma.priority =
account.85.codec.opus.enable = account.85.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 433 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.85.nat.nat_traversal = account.85.nat.udp_update_enable = account.85.nat.udp_update_time = account.85.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.85.blf.subscribe_period = account.85.dtmf.type = account.85.dtmf.dtmf_payload = account.85.dtmf.info_type = account.85.100rel_enable = account.85.subscribe_register = account.85.subscribe_mwi = account.85.subscribe_mwi_expires = account.85.subscribe_mwi_to_vm = voice_mail.number.85 = %BWVOICE-PORTAL-NUMBER-85% account.85.display_mwi.enable = account.85.cid_source = account.85.cid_source_privacy = account.85.cid_source_ppi = account.85.session_timer.enable = account.85.session_timer.expires = account.85.session_timer.refresher = account.85.enable_user_equal_phone = account.85.srtp_encryption = account.85.ptime = account.85.shared_line = %BWSHAREDLINE-BINARY-85% account.85.register_mac = account.85.register_line = account.85.reg_fail_retry_interval = account.85.reg_failed_retry_min_time = account.85.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.85.conf_type =
account.85.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-85%
account.85.sip_server_type = account.85.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 434 OF 1142
########################################################################## ############# ##DECT V81 Add
account.85.register_expires_overlap = account.85.subscribe_expires_overlap = account.85.auto_dial_enable = account.85.auto_dial_num = account.85.cp_source = account.85.transfer_refer_to_contact_header.enable = #V80 Add account.85.custom_ua = account.85.callpark_enable = account.85.check_cseq.enable = account.85.check_to_tag.enable = account.85.hold_use_inactive = account.85.line_seize.expires = account.85.update_ack_while_dialing = account.85.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.85.always_fwd.enable =
account.85.always_fwd.target =
account.85.always_fwd.off_code =
account.85.always_fwd.on_code =
account.85.busy_fwd.enable =
account.85.busy_fwd.target =
account.85.busy_fwd.off_code =
account.85.busy_fwd.on_code =
account.85.timeout_fwd.enable =
account.85.timeout_fwd.target =
account.85.timeout_fwd.timeout =
account.85.timeout_fwd.off_code =
account.85.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.85.dnd.enable =
account.85.dnd.on_code =
account.85.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.85.reg.enable =
handset.85.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 435 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.85.xsi.user =%BWLOGIN-ID-85% account.85.xsi.password =%XSIPASSWORD-85% account.85.xsi.host =%XSP_ADDRESS% account.85.xsi.server_type = account.85.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.85.ldap.enable =
handset.85.ldap.name_filter=
handset.85.ldap.number_filter=
handset.85.ldap.host=
handset.85.ldap.port=
handset.85.ldap.base=
handset.85.ldap.user=
handset.85.ldap.password=
handset.85.ldap.max_hits=
handset.85.ldap.name_attr=
handset.85.ldap.numb_attr=
handset.85.ldap.display_name=
handset.85.ldap.version=
handset.85.ldap.call_in_lookup=
handset.85.ldap.ldap_sort=
handset.85.ldap.tls_mode=
handset.85.ldap.call_out_lookup=
handset.85.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account86 Settings
##
##########################################################################
#############
account.86.enable=%BWLINE-BINARY-86% account.86.label=%BWEXTENSION-86% account.86.display_name=%BWCLID-86% account.86.auth_name=%BWAUTHUSER-86% account.86.user_name=%BWLINEPORT-86% account.86.password=%BWAUTHPASSWORD-86%
#W80B ADD account.86.sip_server.template = account.86.media_transmit.enable =
account.86.alarm.template = account.86.alarm.server = account.86.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 436 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.86.sip_server.1.failback_mode =
account.86.sip_server.1.failback_timeout =
account.86.sip_server.1.register_on_enable =
account.86.sip_server.1.failback_subscribe.enable =
account.86.sip_server.1.invite_retry_counts =
account.86.sip_server.1.only_signal_with_registered =
account.86.sip_server.2.failback_mode = account.86.sip_server.2.failback_timeout = account.86.sip_server.2.register_on_enable = account.86.sip_server.2.failback_subscribe.enable = account.86.sip_server.2.invite_retry_counts = account.86.sip_server.2.only_signal_with_registered =
account.86.naptr_build = account.86.fallback.redundancy_type = account.86.fallback.timeout =
account.86.dns_cache_type = account.86.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.86.anonymous_call =
account.86.reject_anonymous_call =
account.86.send_anonymous_code =
account.86.anonymous_call_oncode =
account.86.anonymous_call_offcode =
account.86.send_anonymous_rejection_code =
account.86.anonymous_reject_oncode =
account.86.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.86.codec.g722.enable =
account.86.codec.g722.priority =
account.86.codec.g729.enable = account.86.codec.g729.priority =
account.86.codec.g726_16.enable = account.86.codec.g726_16.priority =
account.86.codec.g726_24.enable = account.86.codec.g726_24.priority =
account.86.codec.g726_32.enable = account.86.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 437 OF 1142
account.86.codec.g726_40.enable = account.86.codec.g726_40.priority =
account.86.codec.ilbc.enable = account.86.codec.ilbc.priority =
account.86.codec.pcmu.enable = account.86.codec.pcmu.priority =
account.86.codec.pcma.enable = account.86.codec.pcma.priority =
account.86.codec.opus.enable = account.86.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.86.nat.nat_traversal = account.86.nat.udp_update_enable = account.86.nat.udp_update_time = account.86.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.86.blf.subscribe_period = account.86.dtmf.type = account.86.dtmf.dtmf_payload = account.86.dtmf.info_type = account.86.100rel_enable = account.86.subscribe_register = account.86.subscribe_mwi = account.86.subscribe_mwi_expires = account.86.subscribe_mwi_to_vm = voice_mail.number.86 = %BWVOICE-PORTAL-NUMBER-86% account.86.display_mwi.enable = account.86.cid_source = account.86.cid_source_privacy = account.86.cid_source_ppi = account.86.session_timer.enable = account.86.session_timer.expires = account.86.session_timer.refresher = account.86.enable_user_equal_phone = account.86.srtp_encryption = account.86.ptime = account.86.shared_line = %BWSHAREDLINE-BINARY-86% account.86.register_mac = account.86.register_line = account.86.reg_fail_retry_interval = account.86.reg_failed_retry_min_time = account.86.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 438 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.86.conf_type =
account.86.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-86%
account.86.sip_server_type = account.86.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.86.register_expires_overlap = account.86.subscribe_expires_overlap = account.86.auto_dial_enable = account.86.auto_dial_num = account.86.cp_source = account.86.transfer_refer_to_contact_header.enable = #V80 Add account.86.custom_ua = account.86.callpark_enable = account.86.check_cseq.enable = account.86.check_to_tag.enable = account.86.hold_use_inactive = account.86.line_seize.expires = account.86.update_ack_while_dialing = account.86.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.86.always_fwd.enable =
account.86.always_fwd.target =
account.86.always_fwd.off_code =
account.86.always_fwd.on_code =
account.86.busy_fwd.enable =
account.86.busy_fwd.target =
account.86.busy_fwd.off_code =
account.86.busy_fwd.on_code =
account.86.timeout_fwd.enable =
account.86.timeout_fwd.target =
account.86.timeout_fwd.timeout =
account.86.timeout_fwd.off_code =
account.86.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 439 OF 1142
account.86.dnd.enable = account.86.dnd.on_code = account.86.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.86.reg.enable =
handset.86.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.86.xsi.user =%BWLOGIN-ID-86% account.86.xsi.password =%XSIPASSWORD-86% account.86.xsi.host =%XSP_ADDRESS% account.86.xsi.server_type = account.86.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.86.ldap.enable =
handset.86.ldap.name_filter=
handset.86.ldap.number_filter=
handset.86.ldap.host=
handset.86.ldap.port=
handset.86.ldap.base=
handset.86.ldap.user=
handset.86.ldap.password=
handset.86.ldap.max_hits=
handset.86.ldap.name_attr=
handset.86.ldap.numb_attr=
handset.86.ldap.display_name=
handset.86.ldap.version=
handset.86.ldap.call_in_lookup=
handset.86.ldap.ldap_sort=
handset.86.ldap.tls_mode=
handset.86.ldap.call_out_lookup=
handset.86.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account87 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 440 OF 1142
account.87.enable=%BWLINE-BINARY-87% account.87.label=%BWEXTENSION-87% account.87.display_name=%BWCLID-87% account.87.auth_name=%BWAUTHUSER-87% account.87.user_name=%BWLINEPORT-87% account.87.password=%BWAUTHPASSWORD-87%
#W80B ADD account.87.sip_server.template = account.87.media_transmit.enable =
account.87.alarm.template = account.87.alarm.server = account.87.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.87.sip_server.1.failback_mode =
account.87.sip_server.1.failback_timeout =
account.87.sip_server.1.register_on_enable =
account.87.sip_server.1.failback_subscribe.enable =
account.87.sip_server.1.invite_retry_counts =
account.87.sip_server.1.only_signal_with_registered =
account.87.sip_server.2.failback_mode = account.87.sip_server.2.failback_timeout = account.87.sip_server.2.register_on_enable = account.87.sip_server.2.failback_subscribe.enable = account.87.sip_server.2.invite_retry_counts = account.87.sip_server.2.only_signal_with_registered =
account.87.naptr_build = account.87.fallback.redundancy_type = account.87.fallback.timeout =
account.87.dns_cache_type = account.87.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.87.anonymous_call =
account.87.reject_anonymous_call =
account.87.send_anonymous_code =
account.87.anonymous_call_oncode =
account.87.anonymous_call_offcode =
account.87.send_anonymous_rejection_code =
account.87.anonymous_reject_oncode =
account.87.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 441 OF 1142
########################################################################## ############# account.87.codec.g722.enable = account.87.codec.g722.priority =
account.87.codec.g729.enable = account.87.codec.g729.priority =
account.87.codec.g726_16.enable = account.87.codec.g726_16.priority =
account.87.codec.g726_24.enable = account.87.codec.g726_24.priority =
account.87.codec.g726_32.enable = account.87.codec.g726_32.priority =
account.87.codec.g726_40.enable = account.87.codec.g726_40.priority =
account.87.codec.ilbc.enable = account.87.codec.ilbc.priority =
account.87.codec.pcmu.enable = account.87.codec.pcmu.priority =
account.87.codec.pcma.enable = account.87.codec.pcma.priority =
account.87.codec.opus.enable = account.87.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.87.nat.nat_traversal = account.87.nat.udp_update_enable = account.87.nat.udp_update_time = account.87.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.87.blf.subscribe_period = account.87.dtmf.type = account.87.dtmf.dtmf_payload = account.87.dtmf.info_type = account.87.100rel_enable = account.87.subscribe_register = account.87.subscribe_mwi = account.87.subscribe_mwi_expires = account.87.subscribe_mwi_to_vm = voice_mail.number.87 = %BWVOICE-PORTAL-NUMBER-87% account.87.display_mwi.enable = account.87.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 442 OF 1142
account.87.cid_source_privacy = account.87.cid_source_ppi = account.87.session_timer.enable = account.87.session_timer.expires = account.87.session_timer.refresher = account.87.enable_user_equal_phone = account.87.srtp_encryption = account.87.ptime = account.87.shared_line = %BWSHAREDLINE-BINARY-87% account.87.register_mac = account.87.register_line = account.87.reg_fail_retry_interval = account.87.reg_failed_retry_min_time = account.87.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.87.conf_type =
account.87.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-87%
account.87.sip_server_type = account.87.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.87.register_expires_overlap = account.87.subscribe_expires_overlap = account.87.auto_dial_enable = account.87.auto_dial_num = account.87.cp_source = account.87.transfer_refer_to_contact_header.enable = #V80 Add account.87.custom_ua = account.87.callpark_enable = account.87.check_cseq.enable = account.87.check_to_tag.enable = account.87.hold_use_inactive = account.87.line_seize.expires = account.87.update_ack_while_dialing = account.87.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.87.always_fwd.enable =
account.87.always_fwd.target =
account.87.always_fwd.off_code =
account.87.always_fwd.on_code =
account.87.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 443 OF 1142
account.87.busy_fwd.target = account.87.busy_fwd.off_code = account.87.busy_fwd.on_code = account.87.timeout_fwd.enable = account.87.timeout_fwd.target = account.87.timeout_fwd.timeout = account.87.timeout_fwd.off_code = account.87.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.87.dnd.enable =
account.87.dnd.on_code =
account.87.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.87.reg.enable =
handset.87.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.87.xsi.user =%BWLOGIN-ID-87% account.87.xsi.password =%XSIPASSWORD-87% account.87.xsi.host =%XSP_ADDRESS% account.87.xsi.server_type = account.87.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.87.ldap.enable =
handset.87.ldap.name_filter=
handset.87.ldap.number_filter=
handset.87.ldap.host=
handset.87.ldap.port=
handset.87.ldap.base=
handset.87.ldap.user=
handset.87.ldap.password=
handset.87.ldap.max_hits=
handset.87.ldap.name_attr=
handset.87.ldap.numb_attr=
handset.87.ldap.display_name=
handset.87.ldap.version=
handset.87.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 444 OF 1142
handset.87.ldap.ldap_sort= handset.87.ldap.tls_mode= handset.87.ldap.call_out_lookup= handset.87.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account88 Settings
##
##########################################################################
#############
account.88.enable=%BWLINE-BINARY-88% account.88.label=%BWEXTENSION-88% account.88.display_name=%BWCLID-88% account.88.auth_name=%BWAUTHUSER-88% account.88.user_name=%BWLINEPORT-88% account.88.password=%BWAUTHPASSWORD-88%
#W80B ADD account.88.sip_server.template = account.88.media_transmit.enable =
account.88.alarm.template = account.88.alarm.server = account.88.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.88.sip_server.1.failback_mode =
account.88.sip_server.1.failback_timeout =
account.88.sip_server.1.register_on_enable =
account.88.sip_server.1.failback_subscribe.enable =
account.88.sip_server.1.invite_retry_counts =
account.88.sip_server.1.only_signal_with_registered =
account.88.sip_server.2.failback_mode = account.88.sip_server.2.failback_timeout = account.88.sip_server.2.register_on_enable = account.88.sip_server.2.failback_subscribe.enable = account.88.sip_server.2.invite_retry_counts = account.88.sip_server.2.only_signal_with_registered =
account.88.naptr_build = account.88.fallback.redundancy_type = account.88.fallback.timeout =
account.88.dns_cache_type = account.88.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 445 OF 1142
account.88.anonymous_call = account.88.reject_anonymous_call = account.88.send_anonymous_code = account.88.anonymous_call_oncode = account.88.anonymous_call_offcode = account.88.send_anonymous_rejection_code = account.88.anonymous_reject_oncode = account.88.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.88.codec.g722.enable =
account.88.codec.g722.priority =
account.88.codec.g729.enable = account.88.codec.g729.priority =
account.88.codec.g726_16.enable = account.88.codec.g726_16.priority =
account.88.codec.g726_24.enable = account.88.codec.g726_24.priority =
account.88.codec.g726_32.enable = account.88.codec.g726_32.priority =
account.88.codec.g726_40.enable = account.88.codec.g726_40.priority =
account.88.codec.ilbc.enable = account.88.codec.ilbc.priority =
account.88.codec.pcmu.enable = account.88.codec.pcmu.priority =
account.88.codec.pcma.enable = account.88.codec.pcma.priority =
account.88.codec.opus.enable = account.88.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.88.nat.nat_traversal = account.88.nat.udp_update_enable = account.88.nat.udp_update_time = account.88.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 446 OF 1142
########################################################################## #############
account.88.blf.subscribe_period = account.88.dtmf.type = account.88.dtmf.dtmf_payload = account.88.dtmf.info_type = account.88.100rel_enable = account.88.subscribe_register = account.88.subscribe_mwi = account.88.subscribe_mwi_expires = account.88.subscribe_mwi_to_vm = voice_mail.number.88 = %BWVOICE-PORTAL-NUMBER-88% account.88.display_mwi.enable = account.88.cid_source = account.88.cid_source_privacy = account.88.cid_source_ppi = account.88.session_timer.enable = account.88.session_timer.expires = account.88.session_timer.refresher = account.88.enable_user_equal_phone = account.88.srtp_encryption = account.88.ptime = account.88.shared_line = %BWSHAREDLINE-BINARY-88% account.88.register_mac = account.88.register_line = account.88.reg_fail_retry_interval = account.88.reg_failed_retry_min_time = account.88.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.88.conf_type =
account.88.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-88%
account.88.sip_server_type = account.88.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.88.register_expires_overlap = account.88.subscribe_expires_overlap = account.88.auto_dial_enable = account.88.auto_dial_num = account.88.cp_source = account.88.transfer_refer_to_contact_header.enable = #V80 Add account.88.custom_ua = account.88.callpark_enable = account.88.check_cseq.enable = account.88.check_to_tag.enable = account.88.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 447 OF 1142
account.88.line_seize.expires = account.88.update_ack_while_dialing = account.88.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.88.always_fwd.enable =
account.88.always_fwd.target =
account.88.always_fwd.off_code =
account.88.always_fwd.on_code =
account.88.busy_fwd.enable =
account.88.busy_fwd.target =
account.88.busy_fwd.off_code =
account.88.busy_fwd.on_code =
account.88.timeout_fwd.enable =
account.88.timeout_fwd.target =
account.88.timeout_fwd.timeout =
account.88.timeout_fwd.off_code =
account.88.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.88.dnd.enable =
account.88.dnd.on_code =
account.88.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.88.reg.enable =
handset.88.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.88.xsi.user =%BWLOGIN-ID-88% account.88.xsi.password =%XSIPASSWORD-88% account.88.xsi.host =%XSP_ADDRESS% account.88.xsi.server_type = account.88.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 448 OF 1142
########################################################################## ############# handset.88.ldap.enable = handset.88.ldap.name_filter= handset.88.ldap.number_filter= handset.88.ldap.host= handset.88.ldap.port= handset.88.ldap.base= handset.88.ldap.user= handset.88.ldap.password= handset.88.ldap.max_hits= handset.88.ldap.name_attr= handset.88.ldap.numb_attr= handset.88.ldap.display_name= handset.88.ldap.version= handset.88.ldap.call_in_lookup= handset.88.ldap.ldap_sort= handset.88.ldap.tls_mode= handset.88.ldap.call_out_lookup= handset.88.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account89 Settings
##
##########################################################################
#############
account.89.enable=%BWLINE-BINARY-89% account.89.label=%BWEXTENSION-89% account.89.display_name=%BWCLID-89% account.89.auth_name=%BWAUTHUSER-89% account.89.user_name=%BWLINEPORT-89% account.89.password=%BWAUTHPASSWORD-89%
#W80B ADD account.89.sip_server.template = account.89.media_transmit.enable =
account.89.alarm.template = account.89.alarm.server = account.89.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.89.sip_server.1.failback_mode =
account.89.sip_server.1.failback_timeout =
account.89.sip_server.1.register_on_enable =
account.89.sip_server.1.failback_subscribe.enable =
account.89.sip_server.1.invite_retry_counts =
account.89.sip_server.1.only_signal_with_registered =
account.89.sip_server.2.failback_mode = account.89.sip_server.2.failback_timeout = account.89.sip_server.2.register_on_enable = account.89.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 449 OF 1142
account.89.sip_server.2.invite_retry_counts = account.89.sip_server.2.only_signal_with_registered =
account.89.naptr_build = account.89.fallback.redundancy_type = account.89.fallback.timeout =
account.89.dns_cache_type = account.89.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.89.anonymous_call =
account.89.reject_anonymous_call =
account.89.send_anonymous_code =
account.89.anonymous_call_oncode =
account.89.anonymous_call_offcode =
account.89.send_anonymous_rejection_code =
account.89.anonymous_reject_oncode =
account.89.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.89.codec.g722.enable =
account.89.codec.g722.priority =
account.89.codec.g729.enable = account.89.codec.g729.priority =
account.89.codec.g726_16.enable = account.89.codec.g726_16.priority =
account.89.codec.g726_24.enable = account.89.codec.g726_24.priority =
account.89.codec.g726_32.enable = account.89.codec.g726_32.priority =
account.89.codec.g726_40.enable = account.89.codec.g726_40.priority =
account.89.codec.ilbc.enable = account.89.codec.ilbc.priority =
account.89.codec.pcmu.enable = account.89.codec.pcmu.priority =
account.89.codec.pcma.enable = account.89.codec.pcma.priority =
account.89.codec.opus.enable = account.89.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 450 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.89.nat.nat_traversal = account.89.nat.udp_update_enable = account.89.nat.udp_update_time = account.89.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.89.blf.subscribe_period = account.89.dtmf.type = account.89.dtmf.dtmf_payload = account.89.dtmf.info_type = account.89.100rel_enable = account.89.subscribe_register = account.89.subscribe_mwi = account.89.subscribe_mwi_expires = account.89.subscribe_mwi_to_vm = voice_mail.number.89 = %BWVOICE-PORTAL-NUMBER-89% account.89.display_mwi.enable = account.89.cid_source = account.89.cid_source_privacy = account.89.cid_source_ppi = account.89.session_timer.enable = account.89.session_timer.expires = account.89.session_timer.refresher = account.89.enable_user_equal_phone = account.89.srtp_encryption = account.89.ptime = account.89.shared_line = %BWSHAREDLINE-BINARY-89% account.89.register_mac = account.89.register_line = account.89.reg_fail_retry_interval = account.89.reg_failed_retry_min_time = account.89.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.89.conf_type =
account.89.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-89%
account.89.sip_server_type = account.89.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 451 OF 1142
########################################################################## ############# ##DECT V81 Add
account.89.register_expires_overlap = account.89.subscribe_expires_overlap = account.89.auto_dial_enable = account.89.auto_dial_num = account.89.cp_source = account.89.transfer_refer_to_contact_header.enable = #V80 Add account.89.custom_ua = account.89.callpark_enable = account.89.check_cseq.enable = account.89.check_to_tag.enable = account.89.hold_use_inactive = account.89.line_seize.expires = account.89.update_ack_while_dialing = account.89.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.89.always_fwd.enable =
account.89.always_fwd.target =
account.89.always_fwd.off_code =
account.89.always_fwd.on_code =
account.89.busy_fwd.enable =
account.89.busy_fwd.target =
account.89.busy_fwd.off_code =
account.89.busy_fwd.on_code =
account.89.timeout_fwd.enable =
account.89.timeout_fwd.target =
account.89.timeout_fwd.timeout =
account.89.timeout_fwd.off_code =
account.89.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.89.dnd.enable =
account.89.dnd.on_code =
account.89.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.89.reg.enable =
handset.89.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 452 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.89.xsi.user =%BWLOGIN-ID-89% account.89.xsi.password =%XSIPASSWORD-89% account.89.xsi.host =%XSP_ADDRESS% account.89.xsi.server_type = account.89.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.89.ldap.enable =
handset.89.ldap.name_filter=
handset.89.ldap.number_filter=
handset.89.ldap.host=
handset.89.ldap.port=
handset.89.ldap.base=
handset.89.ldap.user=
handset.89.ldap.password=
handset.89.ldap.max_hits=
handset.89.ldap.name_attr=
handset.89.ldap.numb_attr=
handset.89.ldap.display_name=
handset.89.ldap.version=
handset.89.ldap.call_in_lookup=
handset.89.ldap.ldap_sort=
handset.89.ldap.tls_mode=
handset.89.ldap.call_out_lookup=
handset.89.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account90 Settings
##
##########################################################################
#############
account.90.enable=%BWLINE-BINARY-90% account.90.label=%BWEXTENSION-90% account.90.display_name=%BWCLID-90% account.90.auth_name=%BWAUTHUSER-90% account.90.user_name=%BWLINEPORT-90% account.90.password=%BWAUTHPASSWORD-90%
#W80B ADD account.90.sip_server.template = account.90.media_transmit.enable =
account.90.alarm.template = account.90.alarm.server = account.90.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 453 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.90.sip_server.1.failback_mode =
account.90.sip_server.1.failback_timeout =
account.90.sip_server.1.register_on_enable =
account.90.sip_server.1.failback_subscribe.enable =
account.90.sip_server.1.invite_retry_counts =
account.90.sip_server.1.only_signal_with_registered =
account.90.sip_server.2.failback_mode = account.90.sip_server.2.failback_timeout = account.90.sip_server.2.register_on_enable = account.90.sip_server.2.failback_subscribe.enable = account.90.sip_server.2.invite_retry_counts = account.90.sip_server.2.only_signal_with_registered =
account.90.naptr_build = account.90.fallback.redundancy_type = account.90.fallback.timeout =
account.90.dns_cache_type = account.90.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.90.anonymous_call =
account.90.reject_anonymous_call =
account.90.send_anonymous_code =
account.90.anonymous_call_oncode =
account.90.anonymous_call_offcode =
account.90.send_anonymous_rejection_code =
account.90.anonymous_reject_oncode =
account.90.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.90.codec.g722.enable =
account.90.codec.g722.priority =
account.90.codec.g729.enable = account.90.codec.g729.priority =
account.90.codec.g726_16.enable = account.90.codec.g726_16.priority =
account.90.codec.g726_24.enable = account.90.codec.g726_24.priority =
account.90.codec.g726_32.enable = account.90.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 454 OF 1142
account.90.codec.g726_40.enable = account.90.codec.g726_40.priority =
account.90.codec.ilbc.enable = account.90.codec.ilbc.priority =
account.90.codec.pcmu.enable = account.90.codec.pcmu.priority =
account.90.codec.pcma.enable = account.90.codec.pcma.priority =
account.90.codec.opus.enable = account.90.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.90.nat.nat_traversal = account.90.nat.udp_update_enable = account.90.nat.udp_update_time = account.90.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.90.blf.subscribe_period = account.90.dtmf.type = account.90.dtmf.dtmf_payload = account.90.dtmf.info_type = account.90.100rel_enable = account.90.subscribe_register = account.90.subscribe_mwi = account.90.subscribe_mwi_expires = account.90.subscribe_mwi_to_vm = voice_mail.number.90 = %BWVOICE-PORTAL-NUMBER-90% account.90.display_mwi.enable = account.90.cid_source = account.90.cid_source_privacy = account.90.cid_source_ppi = account.90.session_timer.enable = account.90.session_timer.expires = account.90.session_timer.refresher = account.90.enable_user_equal_phone = account.90.srtp_encryption = account.90.ptime = account.90.shared_line = %BWSHAREDLINE-BINARY-90% account.90.register_mac = account.90.register_line = account.90.reg_fail_retry_interval = account.90.reg_failed_retry_min_time = account.90.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 455 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.90.conf_type =
account.90.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-90%
account.90.sip_server_type = account.90.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.90.register_expires_overlap = account.90.subscribe_expires_overlap = account.90.auto_dial_enable = account.90.auto_dial_num = account.90.cp_source = account.90.transfer_refer_to_contact_header.enable = #V80 Add account.90.custom_ua = account.90.callpark_enable = account.90.check_cseq.enable = account.90.check_to_tag.enable = account.90.hold_use_inactive = account.90.line_seize.expires = account.90.update_ack_while_dialing = account.90.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.90.always_fwd.enable =
account.90.always_fwd.target =
account.90.always_fwd.off_code =
account.90.always_fwd.on_code =
account.90.busy_fwd.enable =
account.90.busy_fwd.target =
account.90.busy_fwd.off_code =
account.90.busy_fwd.on_code =
account.90.timeout_fwd.enable =
account.90.timeout_fwd.target =
account.90.timeout_fwd.timeout =
account.90.timeout_fwd.off_code =
account.90.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 456 OF 1142
account.90.dnd.enable = account.90.dnd.on_code = account.90.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.90.reg.enable =
handset.90.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.90.xsi.user =%BWLOGIN-ID-90% account.90.xsi.password =%XSIPASSWORD-90% account.90.xsi.host =%XSP_ADDRESS% account.90.xsi.server_type = account.90.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.90.ldap.enable =
handset.90.ldap.name_filter=
handset.90.ldap.number_filter=
handset.90.ldap.host=
handset.90.ldap.port=
handset.90.ldap.base=
handset.90.ldap.user=
handset.90.ldap.password=
handset.90.ldap.max_hits=
handset.90.ldap.name_attr=
handset.90.ldap.numb_attr=
handset.90.ldap.display_name=
handset.90.ldap.version=
handset.90.ldap.call_in_lookup=
handset.90.ldap.ldap_sort=
handset.90.ldap.tls_mode=
handset.90.ldap.call_out_lookup=
handset.90.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account91 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 457 OF 1142
account.91.enable=%BWLINE-BINARY-91% account.91.label=%BWEXTENSION-91% account.91.display_name=%BWCLID-91% account.91.auth_name=%BWAUTHUSER-91% account.91.user_name=%BWLINEPORT-91% account.91.password=%BWAUTHPASSWORD-91%
#W80B ADD account.91.sip_server.template = account.91.media_transmit.enable =
account.91.alarm.template = account.91.alarm.server = account.91.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.91.sip_server.1.failback_mode =
account.91.sip_server.1.failback_timeout =
account.91.sip_server.1.register_on_enable =
account.91.sip_server.1.failback_subscribe.enable =
account.91.sip_server.1.invite_retry_counts =
account.91.sip_server.1.only_signal_with_registered =
account.91.sip_server.2.failback_mode = account.91.sip_server.2.failback_timeout = account.91.sip_server.2.register_on_enable = account.91.sip_server.2.failback_subscribe.enable = account.91.sip_server.2.invite_retry_counts = account.91.sip_server.2.only_signal_with_registered =
account.91.naptr_build = account.91.fallback.redundancy_type = account.91.fallback.timeout =
account.91.dns_cache_type = account.91.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.91.anonymous_call =
account.91.reject_anonymous_call =
account.91.send_anonymous_code =
account.91.anonymous_call_oncode =
account.91.anonymous_call_offcode =
account.91.send_anonymous_rejection_code =
account.91.anonymous_reject_oncode =
account.91.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 458 OF 1142
########################################################################## ############# account.91.codec.g722.enable = account.91.codec.g722.priority =
account.91.codec.g729.enable = account.91.codec.g729.priority =
account.91.codec.g726_16.enable = account.91.codec.g726_16.priority =
account.91.codec.g726_24.enable = account.91.codec.g726_24.priority =
account.91.codec.g726_32.enable = account.91.codec.g726_32.priority =
account.91.codec.g726_40.enable = account.91.codec.g726_40.priority =
account.91.codec.ilbc.enable = account.91.codec.ilbc.priority =
account.91.codec.pcmu.enable = account.91.codec.pcmu.priority =
account.91.codec.pcma.enable = account.91.codec.pcma.priority =
account.91.codec.opus.enable = account.91.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.91.nat.nat_traversal = account.91.nat.udp_update_enable = account.91.nat.udp_update_time = account.91.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.91.blf.subscribe_period = account.91.dtmf.type = account.91.dtmf.dtmf_payload = account.91.dtmf.info_type = account.91.100rel_enable = account.91.subscribe_register = account.91.subscribe_mwi = account.91.subscribe_mwi_expires = account.91.subscribe_mwi_to_vm = voice_mail.number.91 = %BWVOICE-PORTAL-NUMBER-91% account.91.display_mwi.enable = account.91.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 459 OF 1142
account.91.cid_source_privacy = account.91.cid_source_ppi = account.91.session_timer.enable = account.91.session_timer.expires = account.91.session_timer.refresher = account.91.enable_user_equal_phone = account.91.srtp_encryption = account.91.ptime = account.91.shared_line = %BWSHAREDLINE-BINARY-91% account.91.register_mac = account.91.register_line = account.91.reg_fail_retry_interval = account.91.reg_failed_retry_min_time = account.91.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.91.conf_type =
account.91.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-91%
account.91.sip_server_type = account.91.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.91.register_expires_overlap = account.91.subscribe_expires_overlap = account.91.auto_dial_enable = account.91.auto_dial_num = account.91.cp_source = account.91.transfer_refer_to_contact_header.enable = #V80 Add account.91.custom_ua = account.91.callpark_enable = account.91.check_cseq.enable = account.91.check_to_tag.enable = account.91.hold_use_inactive = account.91.line_seize.expires = account.91.update_ack_while_dialing = account.91.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.91.always_fwd.enable =
account.91.always_fwd.target =
account.91.always_fwd.off_code =
account.91.always_fwd.on_code =
account.91.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 460 OF 1142
account.91.busy_fwd.target = account.91.busy_fwd.off_code = account.91.busy_fwd.on_code = account.91.timeout_fwd.enable = account.91.timeout_fwd.target = account.91.timeout_fwd.timeout = account.91.timeout_fwd.off_code = account.91.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.91.dnd.enable =
account.91.dnd.on_code =
account.91.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.91.reg.enable =
handset.91.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.91.xsi.user =%BWLOGIN-ID-91% account.91.xsi.password =%XSIPASSWORD-91% account.91.xsi.host =%XSP_ADDRESS% account.91.xsi.server_type = account.91.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.91.ldap.enable =
handset.91.ldap.name_filter=
handset.91.ldap.number_filter=
handset.91.ldap.host=
handset.91.ldap.port=
handset.91.ldap.base=
handset.91.ldap.user=
handset.91.ldap.password=
handset.91.ldap.max_hits=
handset.91.ldap.name_attr=
handset.91.ldap.numb_attr=
handset.91.ldap.display_name=
handset.91.ldap.version=
handset.91.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 461 OF 1142
handset.91.ldap.ldap_sort= handset.91.ldap.tls_mode= handset.91.ldap.call_out_lookup= handset.91.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account92 Settings
##
##########################################################################
#############
account.92.enable=%BWLINE-BINARY-92% account.92.label=%BWEXTENSION-92% account.92.display_name=%BWCLID-92% account.92.auth_name=%BWAUTHUSER-92% account.92.user_name=%BWLINEPORT-92% account.92.password=%BWAUTHPASSWORD-92%
#W80B ADD account.92.sip_server.template = account.92.media_transmit.enable =
account.92.alarm.template = account.92.alarm.server = account.92.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.92.sip_server.1.failback_mode =
account.92.sip_server.1.failback_timeout =
account.92.sip_server.1.register_on_enable =
account.92.sip_server.1.failback_subscribe.enable =
account.92.sip_server.1.invite_retry_counts =
account.92.sip_server.1.only_signal_with_registered =
account.92.sip_server.2.failback_mode = account.92.sip_server.2.failback_timeout = account.92.sip_server.2.register_on_enable = account.92.sip_server.2.failback_subscribe.enable = account.92.sip_server.2.invite_retry_counts = account.92.sip_server.2.only_signal_with_registered =
account.92.naptr_build = account.92.fallback.redundancy_type = account.92.fallback.timeout =
account.92.dns_cache_type = account.92.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 462 OF 1142
account.92.anonymous_call = account.92.reject_anonymous_call = account.92.send_anonymous_code = account.92.anonymous_call_oncode = account.92.anonymous_call_offcode = account.92.send_anonymous_rejection_code = account.92.anonymous_reject_oncode = account.92.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.92.codec.g722.enable =
account.92.codec.g722.priority =
account.92.codec.g729.enable = account.92.codec.g729.priority =
account.92.codec.g726_16.enable = account.92.codec.g726_16.priority =
account.92.codec.g726_24.enable = account.92.codec.g726_24.priority =
account.92.codec.g726_32.enable = account.92.codec.g726_32.priority =
account.92.codec.g726_40.enable = account.92.codec.g726_40.priority =
account.92.codec.ilbc.enable = account.92.codec.ilbc.priority =
account.92.codec.pcmu.enable = account.92.codec.pcmu.priority =
account.92.codec.pcma.enable = account.92.codec.pcma.priority =
account.92.codec.opus.enable = account.92.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.92.nat.nat_traversal = account.92.nat.udp_update_enable = account.92.nat.udp_update_time = account.92.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 463 OF 1142
########################################################################## #############
account.92.blf.subscribe_period = account.92.dtmf.type = account.92.dtmf.dtmf_payload = account.92.dtmf.info_type = account.92.100rel_enable = account.92.subscribe_register = account.92.subscribe_mwi = account.92.subscribe_mwi_expires = account.92.subscribe_mwi_to_vm = voice_mail.number.92 = %BWVOICE-PORTAL-NUMBER-92% account.92.display_mwi.enable = account.92.cid_source = account.92.cid_source_privacy = account.92.cid_source_ppi = account.92.session_timer.enable = account.92.session_timer.expires = account.92.session_timer.refresher = account.92.enable_user_equal_phone = account.92.srtp_encryption = account.92.ptime = account.92.shared_line = %BWSHAREDLINE-BINARY-92% account.92.register_mac = account.92.register_line = account.92.reg_fail_retry_interval = account.92.reg_failed_retry_min_time = account.92.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.92.conf_type =
account.92.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-92%
account.92.sip_server_type = account.92.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.92.register_expires_overlap = account.92.subscribe_expires_overlap = account.92.auto_dial_enable = account.92.auto_dial_num = account.92.cp_source = account.92.transfer_refer_to_contact_header.enable = #V80 Add account.92.custom_ua = account.92.callpark_enable = account.92.check_cseq.enable = account.92.check_to_tag.enable = account.92.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 464 OF 1142
account.92.line_seize.expires = account.92.update_ack_while_dialing = account.92.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.92.always_fwd.enable =
account.92.always_fwd.target =
account.92.always_fwd.off_code =
account.92.always_fwd.on_code =
account.92.busy_fwd.enable =
account.92.busy_fwd.target =
account.92.busy_fwd.off_code =
account.92.busy_fwd.on_code =
account.92.timeout_fwd.enable =
account.92.timeout_fwd.target =
account.92.timeout_fwd.timeout =
account.92.timeout_fwd.off_code =
account.92.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.92.dnd.enable =
account.92.dnd.on_code =
account.92.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.92.reg.enable =
handset.92.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.92.xsi.user =%BWLOGIN-ID-92% account.92.xsi.password =%XSIPASSWORD-92% account.92.xsi.host =%XSP_ADDRESS% account.92.xsi.server_type = account.92.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 465 OF 1142
########################################################################## ############# handset.92.ldap.enable = handset.92.ldap.name_filter= handset.92.ldap.number_filter= handset.92.ldap.host= handset.92.ldap.port= handset.92.ldap.base= handset.92.ldap.user= handset.92.ldap.password= handset.92.ldap.max_hits= handset.92.ldap.name_attr= handset.92.ldap.numb_attr= handset.92.ldap.display_name= handset.92.ldap.version= handset.92.ldap.call_in_lookup= handset.92.ldap.ldap_sort= handset.92.ldap.tls_mode= handset.92.ldap.call_out_lookup= handset.92.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account93 Settings
##
##########################################################################
#############
account.93.enable=%BWLINE-BINARY-93% account.93.label=%BWEXTENSION-93% account.93.display_name=%BWCLID-93% account.93.auth_name=%BWAUTHUSER-93% account.93.user_name=%BWLINEPORT-93% account.93.password=%BWAUTHPASSWORD-93%
#W80B ADD account.93.sip_server.template = account.93.media_transmit.enable =
account.93.alarm.template = account.93.alarm.server = account.93.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.93.sip_server.1.failback_mode =
account.93.sip_server.1.failback_timeout =
account.93.sip_server.1.register_on_enable =
account.93.sip_server.1.failback_subscribe.enable =
account.93.sip_server.1.invite_retry_counts =
account.93.sip_server.1.only_signal_with_registered =
account.93.sip_server.2.failback_mode = account.93.sip_server.2.failback_timeout = account.93.sip_server.2.register_on_enable = account.93.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 466 OF 1142
account.93.sip_server.2.invite_retry_counts = account.93.sip_server.2.only_signal_with_registered =
account.93.naptr_build = account.93.fallback.redundancy_type = account.93.fallback.timeout =
account.93.dns_cache_type = account.93.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.93.anonymous_call =
account.93.reject_anonymous_call =
account.93.send_anonymous_code =
account.93.anonymous_call_oncode =
account.93.anonymous_call_offcode =
account.93.send_anonymous_rejection_code =
account.93.anonymous_reject_oncode =
account.93.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.93.codec.g722.enable =
account.93.codec.g722.priority =
account.93.codec.g729.enable = account.93.codec.g729.priority =
account.93.codec.g726_16.enable = account.93.codec.g726_16.priority =
account.93.codec.g726_24.enable = account.93.codec.g726_24.priority =
account.93.codec.g726_32.enable = account.93.codec.g726_32.priority =
account.93.codec.g726_40.enable = account.93.codec.g726_40.priority =
account.93.codec.ilbc.enable = account.93.codec.ilbc.priority =
account.93.codec.pcmu.enable = account.93.codec.pcmu.priority =
account.93.codec.pcma.enable = account.93.codec.pcma.priority =
account.93.codec.opus.enable = account.93.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 467 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.93.nat.nat_traversal = account.93.nat.udp_update_enable = account.93.nat.udp_update_time = account.93.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.93.blf.subscribe_period = account.93.dtmf.type = account.93.dtmf.dtmf_payload = account.93.dtmf.info_type = account.93.100rel_enable = account.93.subscribe_register = account.93.subscribe_mwi = account.93.subscribe_mwi_expires = account.93.subscribe_mwi_to_vm = voice_mail.number.93 = %BWVOICE-PORTAL-NUMBER-93% account.93.display_mwi.enable = account.93.cid_source = account.93.cid_source_privacy = account.93.cid_source_ppi = account.93.session_timer.enable = account.93.session_timer.expires = account.93.session_timer.refresher = account.93.enable_user_equal_phone = account.93.srtp_encryption = account.93.ptime = account.93.shared_line = %BWSHAREDLINE-BINARY-93% account.93.register_mac = account.93.register_line = account.93.reg_fail_retry_interval = account.93.reg_failed_retry_min_time = account.93.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.93.conf_type =
account.93.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-93%
account.93.sip_server_type = account.93.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 468 OF 1142
########################################################################## ############# ##DECT V81 Add
account.93.register_expires_overlap = account.93.subscribe_expires_overlap = account.93.auto_dial_enable = account.93.auto_dial_num = account.93.cp_source = account.93.transfer_refer_to_contact_header.enable = #V80 Add account.93.custom_ua = account.93.callpark_enable = account.93.check_cseq.enable = account.93.check_to_tag.enable = account.93.hold_use_inactive = account.93.line_seize.expires = account.93.update_ack_while_dialing = account.93.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.93.always_fwd.enable =
account.93.always_fwd.target =
account.93.always_fwd.off_code =
account.93.always_fwd.on_code =
account.93.busy_fwd.enable =
account.93.busy_fwd.target =
account.93.busy_fwd.off_code =
account.93.busy_fwd.on_code =
account.93.timeout_fwd.enable =
account.93.timeout_fwd.target =
account.93.timeout_fwd.timeout =
account.93.timeout_fwd.off_code =
account.93.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.93.dnd.enable =
account.93.dnd.on_code =
account.93.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.93.reg.enable =
handset.93.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 469 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.93.xsi.user =%BWLOGIN-ID-93% account.93.xsi.password =%XSIPASSWORD-93% account.93.xsi.host =%XSP_ADDRESS% account.93.xsi.server_type = account.93.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.93.ldap.enable =
handset.93.ldap.name_filter=
handset.93.ldap.number_filter=
handset.93.ldap.host=
handset.93.ldap.port=
handset.93.ldap.base=
handset.93.ldap.user=
handset.93.ldap.password=
handset.93.ldap.max_hits=
handset.93.ldap.name_attr=
handset.93.ldap.numb_attr=
handset.93.ldap.display_name=
handset.93.ldap.version=
handset.93.ldap.call_in_lookup=
handset.93.ldap.ldap_sort=
handset.93.ldap.tls_mode=
handset.93.ldap.call_out_lookup=
handset.93.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account94 Settings
##
##########################################################################
#############
account.94.enable=%BWLINE-BINARY-94% account.94.label=%BWEXTENSION-94% account.94.display_name=%BWCLID-94% account.94.auth_name=%BWAUTHUSER-94% account.94.user_name=%BWLINEPORT-94% account.94.password=%BWAUTHPASSWORD-94%
#W80B ADD account.94.sip_server.template = account.94.media_transmit.enable =
account.94.alarm.template = account.94.alarm.server = account.94.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 470 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.94.sip_server.1.failback_mode =
account.94.sip_server.1.failback_timeout =
account.94.sip_server.1.register_on_enable =
account.94.sip_server.1.failback_subscribe.enable =
account.94.sip_server.1.invite_retry_counts =
account.94.sip_server.1.only_signal_with_registered =
account.94.sip_server.2.failback_mode = account.94.sip_server.2.failback_timeout = account.94.sip_server.2.register_on_enable = account.94.sip_server.2.failback_subscribe.enable = account.94.sip_server.2.invite_retry_counts = account.94.sip_server.2.only_signal_with_registered =
account.94.naptr_build = account.94.fallback.redundancy_type = account.94.fallback.timeout =
account.94.dns_cache_type = account.94.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.94.anonymous_call =
account.94.reject_anonymous_call =
account.94.send_anonymous_code =
account.94.anonymous_call_oncode =
account.94.anonymous_call_offcode =
account.94.send_anonymous_rejection_code =
account.94.anonymous_reject_oncode =
account.94.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.94.codec.g722.enable =
account.94.codec.g722.priority =
account.94.codec.g729.enable = account.94.codec.g729.priority =
account.94.codec.g726_16.enable = account.94.codec.g726_16.priority =
account.94.codec.g726_24.enable = account.94.codec.g726_24.priority =
account.94.codec.g726_32.enable = account.94.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 471 OF 1142
account.94.codec.g726_40.enable = account.94.codec.g726_40.priority =
account.94.codec.ilbc.enable = account.94.codec.ilbc.priority =
account.94.codec.pcmu.enable = account.94.codec.pcmu.priority =
account.94.codec.pcma.enable = account.94.codec.pcma.priority =
account.94.codec.opus.enable = account.94.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.94.nat.nat_traversal = account.94.nat.udp_update_enable = account.94.nat.udp_update_time = account.94.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.94.blf.subscribe_period = account.94.dtmf.type = account.94.dtmf.dtmf_payload = account.94.dtmf.info_type = account.94.100rel_enable = account.94.subscribe_register = account.94.subscribe_mwi = account.94.subscribe_mwi_expires = account.94.subscribe_mwi_to_vm = voice_mail.number.94 = %BWVOICE-PORTAL-NUMBER-94% account.94.display_mwi.enable = account.94.cid_source = account.94.cid_source_privacy = account.94.cid_source_ppi = account.94.session_timer.enable = account.94.session_timer.expires = account.94.session_timer.refresher = account.94.enable_user_equal_phone = account.94.srtp_encryption = account.94.ptime = account.94.shared_line = %BWSHAREDLINE-BINARY-94% account.94.register_mac = account.94.register_line = account.94.reg_fail_retry_interval = account.94.reg_failed_retry_min_time = account.94.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 472 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.94.conf_type =
account.94.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-94%
account.94.sip_server_type = account.94.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.94.register_expires_overlap = account.94.subscribe_expires_overlap = account.94.auto_dial_enable = account.94.auto_dial_num = account.94.cp_source = account.94.transfer_refer_to_contact_header.enable = #V80 Add account.94.custom_ua = account.94.callpark_enable = account.94.check_cseq.enable = account.94.check_to_tag.enable = account.94.hold_use_inactive = account.94.line_seize.expires = account.94.update_ack_while_dialing = account.94.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.94.always_fwd.enable =
account.94.always_fwd.target =
account.94.always_fwd.off_code =
account.94.always_fwd.on_code =
account.94.busy_fwd.enable =
account.94.busy_fwd.target =
account.94.busy_fwd.off_code =
account.94.busy_fwd.on_code =
account.94.timeout_fwd.enable =
account.94.timeout_fwd.target =
account.94.timeout_fwd.timeout =
account.94.timeout_fwd.off_code =
account.94.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 473 OF 1142
account.94.dnd.enable = account.94.dnd.on_code = account.94.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.94.reg.enable =
handset.94.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.94.xsi.user =%BWLOGIN-ID-94% account.94.xsi.password =%XSIPASSWORD-94% account.94.xsi.host =%XSP_ADDRESS% account.94.xsi.server_type = account.94.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.94.ldap.enable =
handset.94.ldap.name_filter=
handset.94.ldap.number_filter=
handset.94.ldap.host=
handset.94.ldap.port=
handset.94.ldap.base=
handset.94.ldap.user=
handset.94.ldap.password=
handset.94.ldap.max_hits=
handset.94.ldap.name_attr=
handset.94.ldap.numb_attr=
handset.94.ldap.display_name=
handset.94.ldap.version=
handset.94.ldap.call_in_lookup=
handset.94.ldap.ldap_sort=
handset.94.ldap.tls_mode=
handset.94.ldap.call_out_lookup=
handset.94.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account95 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 474 OF 1142
account.95.enable=%BWLINE-BINARY-95% account.95.label=%BWEXTENSION-95% account.95.display_name=%BWCLID-95% account.95.auth_name=%BWAUTHUSER-95% account.95.user_name=%BWLINEPORT-95% account.95.password=%BWAUTHPASSWORD-95%
#W80B ADD account.95.sip_server.template = account.95.media_transmit.enable =
account.95.alarm.template = account.95.alarm.server = account.95.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.95.sip_server.1.failback_mode =
account.95.sip_server.1.failback_timeout =
account.95.sip_server.1.register_on_enable =
account.95.sip_server.1.failback_subscribe.enable =
account.95.sip_server.1.invite_retry_counts =
account.95.sip_server.1.only_signal_with_registered =
account.95.sip_server.2.failback_mode = account.95.sip_server.2.failback_timeout = account.95.sip_server.2.register_on_enable = account.95.sip_server.2.failback_subscribe.enable = account.95.sip_server.2.invite_retry_counts = account.95.sip_server.2.only_signal_with_registered =
account.95.naptr_build = account.95.fallback.redundancy_type = account.95.fallback.timeout =
account.95.dns_cache_type = account.95.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.95.anonymous_call =
account.95.reject_anonymous_call =
account.95.send_anonymous_code =
account.95.anonymous_call_oncode =
account.95.anonymous_call_offcode =
account.95.send_anonymous_rejection_code =
account.95.anonymous_reject_oncode =
account.95.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 475 OF 1142
########################################################################## ############# account.95.codec.g722.enable = account.95.codec.g722.priority =
account.95.codec.g729.enable = account.95.codec.g729.priority =
account.95.codec.g726_16.enable = account.95.codec.g726_16.priority =
account.95.codec.g726_24.enable = account.95.codec.g726_24.priority =
account.95.codec.g726_32.enable = account.95.codec.g726_32.priority =
account.95.codec.g726_40.enable = account.95.codec.g726_40.priority =
account.95.codec.ilbc.enable = account.95.codec.ilbc.priority =
account.95.codec.pcmu.enable = account.95.codec.pcmu.priority =
account.95.codec.pcma.enable = account.95.codec.pcma.priority =
account.95.codec.opus.enable = account.95.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.95.nat.nat_traversal = account.95.nat.udp_update_enable = account.95.nat.udp_update_time = account.95.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.95.blf.subscribe_period = account.95.dtmf.type = account.95.dtmf.dtmf_payload = account.95.dtmf.info_type = account.95.100rel_enable = account.95.subscribe_register = account.95.subscribe_mwi = account.95.subscribe_mwi_expires = account.95.subscribe_mwi_to_vm = voice_mail.number.95 = %BWVOICE-PORTAL-NUMBER-95% account.95.display_mwi.enable = account.95.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 476 OF 1142
account.95.cid_source_privacy = account.95.cid_source_ppi = account.95.session_timer.enable = account.95.session_timer.expires = account.95.session_timer.refresher = account.95.enable_user_equal_phone = account.95.srtp_encryption = account.95.ptime = account.95.shared_line = %BWSHAREDLINE-BINARY-95% account.95.register_mac = account.95.register_line = account.95.reg_fail_retry_interval = account.95.reg_failed_retry_min_time = account.95.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.95.conf_type =
account.95.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-95%
account.95.sip_server_type = account.95.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.95.register_expires_overlap = account.95.subscribe_expires_overlap = account.95.auto_dial_enable = account.95.auto_dial_num = account.95.cp_source = account.95.transfer_refer_to_contact_header.enable = #V80 Add account.95.custom_ua = account.95.callpark_enable = account.95.check_cseq.enable = account.95.check_to_tag.enable = account.95.hold_use_inactive = account.95.line_seize.expires = account.95.update_ack_while_dialing = account.95.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.95.always_fwd.enable =
account.95.always_fwd.target =
account.95.always_fwd.off_code =
account.95.always_fwd.on_code =
account.95.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 477 OF 1142
account.95.busy_fwd.target = account.95.busy_fwd.off_code = account.95.busy_fwd.on_code = account.95.timeout_fwd.enable = account.95.timeout_fwd.target = account.95.timeout_fwd.timeout = account.95.timeout_fwd.off_code = account.95.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.95.dnd.enable =
account.95.dnd.on_code =
account.95.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.95.reg.enable =
handset.95.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.95.xsi.user =%BWLOGIN-ID-95% account.95.xsi.password =%XSIPASSWORD-95% account.95.xsi.host =%XSP_ADDRESS% account.95.xsi.server_type = account.95.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.95.ldap.enable =
handset.95.ldap.name_filter=
handset.95.ldap.number_filter=
handset.95.ldap.host=
handset.95.ldap.port=
handset.95.ldap.base=
handset.95.ldap.user=
handset.95.ldap.password=
handset.95.ldap.max_hits=
handset.95.ldap.name_attr=
handset.95.ldap.numb_attr=
handset.95.ldap.display_name=
handset.95.ldap.version=
handset.95.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 478 OF 1142
handset.95.ldap.ldap_sort= handset.95.ldap.tls_mode= handset.95.ldap.call_out_lookup= handset.95.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account96 Settings
##
##########################################################################
#############
account.96.enable=%BWLINE-BINARY-96% account.96.label=%BWEXTENSION-96% account.96.display_name=%BWCLID-96% account.96.auth_name=%BWAUTHUSER-96% account.96.user_name=%BWLINEPORT-96% account.96.password=%BWAUTHPASSWORD-96%
#W80B ADD account.96.sip_server.template = account.96.media_transmit.enable =
account.96.alarm.template = account.96.alarm.server = account.96.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.96.sip_server.1.failback_mode =
account.96.sip_server.1.failback_timeout =
account.96.sip_server.1.register_on_enable =
account.96.sip_server.1.failback_subscribe.enable =
account.96.sip_server.1.invite_retry_counts =
account.96.sip_server.1.only_signal_with_registered =
account.96.sip_server.2.failback_mode = account.96.sip_server.2.failback_timeout = account.96.sip_server.2.register_on_enable = account.96.sip_server.2.failback_subscribe.enable = account.96.sip_server.2.invite_retry_counts = account.96.sip_server.2.only_signal_with_registered =
account.96.naptr_build = account.96.fallback.redundancy_type = account.96.fallback.timeout =
account.96.dns_cache_type = account.96.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 479 OF 1142
account.96.anonymous_call = account.96.reject_anonymous_call = account.96.send_anonymous_code = account.96.anonymous_call_oncode = account.96.anonymous_call_offcode = account.96.send_anonymous_rejection_code = account.96.anonymous_reject_oncode = account.96.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.96.codec.g722.enable =
account.96.codec.g722.priority =
account.96.codec.g729.enable = account.96.codec.g729.priority =
account.96.codec.g726_16.enable = account.96.codec.g726_16.priority =
account.96.codec.g726_24.enable = account.96.codec.g726_24.priority =
account.96.codec.g726_32.enable = account.96.codec.g726_32.priority =
account.96.codec.g726_40.enable = account.96.codec.g726_40.priority =
account.96.codec.ilbc.enable = account.96.codec.ilbc.priority =
account.96.codec.pcmu.enable = account.96.codec.pcmu.priority =
account.96.codec.pcma.enable = account.96.codec.pcma.priority =
account.96.codec.opus.enable = account.96.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.96.nat.nat_traversal = account.96.nat.udp_update_enable = account.96.nat.udp_update_time = account.96.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 480 OF 1142
########################################################################## #############
account.96.blf.subscribe_period = account.96.dtmf.type = account.96.dtmf.dtmf_payload = account.96.dtmf.info_type = account.96.100rel_enable = account.96.subscribe_register = account.96.subscribe_mwi = account.96.subscribe_mwi_expires = account.96.subscribe_mwi_to_vm = voice_mail.number.96 = %BWVOICE-PORTAL-NUMBER-96% account.96.display_mwi.enable = account.96.cid_source = account.96.cid_source_privacy = account.96.cid_source_ppi = account.96.session_timer.enable = account.96.session_timer.expires = account.96.session_timer.refresher = account.96.enable_user_equal_phone = account.96.srtp_encryption = account.96.ptime = account.96.shared_line = %BWSHAREDLINE-BINARY-96% account.96.register_mac = account.96.register_line = account.96.reg_fail_retry_interval = account.96.reg_failed_retry_min_time = account.96.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.96.conf_type =
account.96.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-96%
account.96.sip_server_type = account.96.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.96.register_expires_overlap = account.96.subscribe_expires_overlap = account.96.auto_dial_enable = account.96.auto_dial_num = account.96.cp_source = account.96.transfer_refer_to_contact_header.enable = #V80 Add account.96.custom_ua = account.96.callpark_enable = account.96.check_cseq.enable = account.96.check_to_tag.enable = account.96.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 481 OF 1142
account.96.line_seize.expires = account.96.update_ack_while_dialing = account.96.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.96.always_fwd.enable =
account.96.always_fwd.target =
account.96.always_fwd.off_code =
account.96.always_fwd.on_code =
account.96.busy_fwd.enable =
account.96.busy_fwd.target =
account.96.busy_fwd.off_code =
account.96.busy_fwd.on_code =
account.96.timeout_fwd.enable =
account.96.timeout_fwd.target =
account.96.timeout_fwd.timeout =
account.96.timeout_fwd.off_code =
account.96.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.96.dnd.enable =
account.96.dnd.on_code =
account.96.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.96.reg.enable =
handset.96.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.96.xsi.user =%BWLOGIN-ID-96% account.96.xsi.password =%XSIPASSWORD-96% account.96.xsi.host =%XSP_ADDRESS% account.96.xsi.server_type = account.96.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 482 OF 1142
########################################################################## ############# handset.96.ldap.enable = handset.96.ldap.name_filter= handset.96.ldap.number_filter= handset.96.ldap.host= handset.96.ldap.port= handset.96.ldap.base= handset.96.ldap.user= handset.96.ldap.password= handset.96.ldap.max_hits= handset.96.ldap.name_attr= handset.96.ldap.numb_attr= handset.96.ldap.display_name= handset.96.ldap.version= handset.96.ldap.call_in_lookup= handset.96.ldap.ldap_sort= handset.96.ldap.tls_mode= handset.96.ldap.call_out_lookup= handset.96.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account97 Settings
##
##########################################################################
#############
account.97.enable=%BWLINE-BINARY-97% account.97.label=%BWEXTENSION-97% account.97.display_name=%BWCLID-97% account.97.auth_name=%BWAUTHUSER-97% account.97.user_name=%BWLINEPORT-97% account.97.password=%BWAUTHPASSWORD-97%
#W80B ADD account.97.sip_server.template = account.97.media_transmit.enable =
account.97.alarm.template = account.97.alarm.server = account.97.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.97.sip_server.1.failback_mode =
account.97.sip_server.1.failback_timeout =
account.97.sip_server.1.register_on_enable =
account.97.sip_server.1.failback_subscribe.enable =
account.97.sip_server.1.invite_retry_counts =
account.97.sip_server.1.only_signal_with_registered =
account.97.sip_server.2.failback_mode = account.97.sip_server.2.failback_timeout = account.97.sip_server.2.register_on_enable = account.97.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 483 OF 1142
account.97.sip_server.2.invite_retry_counts = account.97.sip_server.2.only_signal_with_registered =
account.97.naptr_build = account.97.fallback.redundancy_type = account.97.fallback.timeout =
account.97.dns_cache_type = account.97.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.97.anonymous_call =
account.97.reject_anonymous_call =
account.97.send_anonymous_code =
account.97.anonymous_call_oncode =
account.97.anonymous_call_offcode =
account.97.send_anonymous_rejection_code =
account.97.anonymous_reject_oncode =
account.97.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.97.codec.g722.enable =
account.97.codec.g722.priority =
account.97.codec.g729.enable = account.97.codec.g729.priority =
account.97.codec.g726_16.enable = account.97.codec.g726_16.priority =
account.97.codec.g726_24.enable = account.97.codec.g726_24.priority =
account.97.codec.g726_32.enable = account.97.codec.g726_32.priority =
account.97.codec.g726_40.enable = account.97.codec.g726_40.priority =
account.97.codec.ilbc.enable = account.97.codec.ilbc.priority =
account.97.codec.pcmu.enable = account.97.codec.pcmu.priority =
account.97.codec.pcma.enable = account.97.codec.pcma.priority =
account.97.codec.opus.enable = account.97.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 484 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.97.nat.nat_traversal = account.97.nat.udp_update_enable = account.97.nat.udp_update_time = account.97.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.97.blf.subscribe_period = account.97.dtmf.type = account.97.dtmf.dtmf_payload = account.97.dtmf.info_type = account.97.100rel_enable = account.97.subscribe_register = account.97.subscribe_mwi = account.97.subscribe_mwi_expires = account.97.subscribe_mwi_to_vm = voice_mail.number.97 = %BWVOICE-PORTAL-NUMBER-97% account.97.display_mwi.enable = account.97.cid_source = account.97.cid_source_privacy = account.97.cid_source_ppi = account.97.session_timer.enable = account.97.session_timer.expires = account.97.session_timer.refresher = account.97.enable_user_equal_phone = account.97.srtp_encryption = account.97.ptime = account.97.shared_line = %BWSHAREDLINE-BINARY-97% account.97.register_mac = account.97.register_line = account.97.reg_fail_retry_interval = account.97.reg_failed_retry_min_time = account.97.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.97.conf_type =
account.97.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-97%
account.97.sip_server_type = account.97.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 485 OF 1142
########################################################################## ############# ##DECT V81 Add
account.97.register_expires_overlap = account.97.subscribe_expires_overlap = account.97.auto_dial_enable = account.97.auto_dial_num = account.97.cp_source = account.97.transfer_refer_to_contact_header.enable = #V80 Add account.97.custom_ua = account.97.callpark_enable = account.97.check_cseq.enable = account.97.check_to_tag.enable = account.97.hold_use_inactive = account.97.line_seize.expires = account.97.update_ack_while_dialing = account.97.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.97.always_fwd.enable =
account.97.always_fwd.target =
account.97.always_fwd.off_code =
account.97.always_fwd.on_code =
account.97.busy_fwd.enable =
account.97.busy_fwd.target =
account.97.busy_fwd.off_code =
account.97.busy_fwd.on_code =
account.97.timeout_fwd.enable =
account.97.timeout_fwd.target =
account.97.timeout_fwd.timeout =
account.97.timeout_fwd.off_code =
account.97.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.97.dnd.enable =
account.97.dnd.on_code =
account.97.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.97.reg.enable =
handset.97.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 486 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.97.xsi.user =%BWLOGIN-ID-97% account.97.xsi.password =%XSIPASSWORD-97% account.97.xsi.host =%XSP_ADDRESS% account.97.xsi.server_type = account.97.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.97.ldap.enable =
handset.97.ldap.name_filter=
handset.97.ldap.number_filter=
handset.97.ldap.host=
handset.97.ldap.port=
handset.97.ldap.base=
handset.97.ldap.user=
handset.97.ldap.password=
handset.97.ldap.max_hits=
handset.97.ldap.name_attr=
handset.97.ldap.numb_attr=
handset.97.ldap.display_name=
handset.97.ldap.version=
handset.97.ldap.call_in_lookup=
handset.97.ldap.ldap_sort=
handset.97.ldap.tls_mode=
handset.97.ldap.call_out_lookup=
handset.97.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account98 Settings
##
##########################################################################
#############
account.98.enable=%BWLINE-BINARY-98% account.98.label=%BWEXTENSION-98% account.98.display_name=%BWCLID-98% account.98.auth_name=%BWAUTHUSER-98% account.98.user_name=%BWLINEPORT-98% account.98.password=%BWAUTHPASSWORD-98%
#W80B ADD account.98.sip_server.template = account.98.media_transmit.enable =
account.98.alarm.template = account.98.alarm.server = account.98.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 487 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.98.sip_server.1.failback_mode =
account.98.sip_server.1.failback_timeout =
account.98.sip_server.1.register_on_enable =
account.98.sip_server.1.failback_subscribe.enable =
account.98.sip_server.1.invite_retry_counts =
account.98.sip_server.1.only_signal_with_registered =
account.98.sip_server.2.failback_mode = account.98.sip_server.2.failback_timeout = account.98.sip_server.2.register_on_enable = account.98.sip_server.2.failback_subscribe.enable = account.98.sip_server.2.invite_retry_counts = account.98.sip_server.2.only_signal_with_registered =
account.98.naptr_build = account.98.fallback.redundancy_type = account.98.fallback.timeout =
account.98.dns_cache_type = account.98.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.98.anonymous_call =
account.98.reject_anonymous_call =
account.98.send_anonymous_code =
account.98.anonymous_call_oncode =
account.98.anonymous_call_offcode =
account.98.send_anonymous_rejection_code =
account.98.anonymous_reject_oncode =
account.98.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.98.codec.g722.enable =
account.98.codec.g722.priority =
account.98.codec.g729.enable = account.98.codec.g729.priority =
account.98.codec.g726_16.enable = account.98.codec.g726_16.priority =
account.98.codec.g726_24.enable = account.98.codec.g726_24.priority =
account.98.codec.g726_32.enable = account.98.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 488 OF 1142
account.98.codec.g726_40.enable = account.98.codec.g726_40.priority =
account.98.codec.ilbc.enable = account.98.codec.ilbc.priority =
account.98.codec.pcmu.enable = account.98.codec.pcmu.priority =
account.98.codec.pcma.enable = account.98.codec.pcma.priority =
account.98.codec.opus.enable = account.98.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.98.nat.nat_traversal = account.98.nat.udp_update_enable = account.98.nat.udp_update_time = account.98.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.98.blf.subscribe_period = account.98.dtmf.type = account.98.dtmf.dtmf_payload = account.98.dtmf.info_type = account.98.100rel_enable = account.98.subscribe_register = account.98.subscribe_mwi = account.98.subscribe_mwi_expires = account.98.subscribe_mwi_to_vm = voice_mail.number.98 = %BWVOICE-PORTAL-NUMBER-98% account.98.display_mwi.enable = account.98.cid_source = account.98.cid_source_privacy = account.98.cid_source_ppi = account.98.session_timer.enable = account.98.session_timer.expires = account.98.session_timer.refresher = account.98.enable_user_equal_phone = account.98.srtp_encryption = account.98.ptime = account.98.shared_line = %BWSHAREDLINE-BINARY-98% account.98.register_mac = account.98.register_line = account.98.reg_fail_retry_interval = account.98.reg_failed_retry_min_time = account.98.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 489 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.98.conf_type =
account.98.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-98%
account.98.sip_server_type = account.98.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.98.register_expires_overlap = account.98.subscribe_expires_overlap = account.98.auto_dial_enable = account.98.auto_dial_num = account.98.cp_source = account.98.transfer_refer_to_contact_header.enable = #V80 Add account.98.custom_ua = account.98.callpark_enable = account.98.check_cseq.enable = account.98.check_to_tag.enable = account.98.hold_use_inactive = account.98.line_seize.expires = account.98.update_ack_while_dialing = account.98.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.98.always_fwd.enable =
account.98.always_fwd.target =
account.98.always_fwd.off_code =
account.98.always_fwd.on_code =
account.98.busy_fwd.enable =
account.98.busy_fwd.target =
account.98.busy_fwd.off_code =
account.98.busy_fwd.on_code =
account.98.timeout_fwd.enable =
account.98.timeout_fwd.target =
account.98.timeout_fwd.timeout =
account.98.timeout_fwd.off_code =
account.98.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 490 OF 1142
account.98.dnd.enable = account.98.dnd.on_code = account.98.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.98.reg.enable =
handset.98.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.98.xsi.user =%BWLOGIN-ID-98% account.98.xsi.password =%XSIPASSWORD-98% account.98.xsi.host =%XSP_ADDRESS% account.98.xsi.server_type = account.98.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.98.ldap.enable =
handset.98.ldap.name_filter=
handset.98.ldap.number_filter=
handset.98.ldap.host=
handset.98.ldap.port=
handset.98.ldap.base=
handset.98.ldap.user=
handset.98.ldap.password=
handset.98.ldap.max_hits=
handset.98.ldap.name_attr=
handset.98.ldap.numb_attr=
handset.98.ldap.display_name=
handset.98.ldap.version=
handset.98.ldap.call_in_lookup=
handset.98.ldap.ldap_sort=
handset.98.ldap.tls_mode=
handset.98.ldap.call_out_lookup=
handset.98.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account99 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 491 OF 1142
account.99.enable=%BWLINE-BINARY-99% account.99.label=%BWEXTENSION-99% account.99.display_name=%BWCLID-99% account.99.auth_name=%BWAUTHUSER-99% account.99.user_name=%BWLINEPORT-99% account.99.password=%BWAUTHPASSWORD-99%
#W80B ADD account.99.sip_server.template = account.99.media_transmit.enable =
account.99.alarm.template = account.99.alarm.server = account.99.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.99.sip_server.1.failback_mode =
account.99.sip_server.1.failback_timeout =
account.99.sip_server.1.register_on_enable =
account.99.sip_server.1.failback_subscribe.enable =
account.99.sip_server.1.invite_retry_counts =
account.99.sip_server.1.only_signal_with_registered =
account.99.sip_server.2.failback_mode = account.99.sip_server.2.failback_timeout = account.99.sip_server.2.register_on_enable = account.99.sip_server.2.failback_subscribe.enable = account.99.sip_server.2.invite_retry_counts = account.99.sip_server.2.only_signal_with_registered =
account.99.naptr_build = account.99.fallback.redundancy_type = account.99.fallback.timeout =
account.99.dns_cache_type = account.99.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.99.anonymous_call =
account.99.reject_anonymous_call =
account.99.send_anonymous_code =
account.99.anonymous_call_oncode =
account.99.anonymous_call_offcode =
account.99.send_anonymous_rejection_code =
account.99.anonymous_reject_oncode =
account.99.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 492 OF 1142
########################################################################## ############# account.99.codec.g722.enable = account.99.codec.g722.priority =
account.99.codec.g729.enable = account.99.codec.g729.priority =
account.99.codec.g726_16.enable = account.99.codec.g726_16.priority =
account.99.codec.g726_24.enable = account.99.codec.g726_24.priority =
account.99.codec.g726_32.enable = account.99.codec.g726_32.priority =
account.99.codec.g726_40.enable = account.99.codec.g726_40.priority =
account.99.codec.ilbc.enable = account.99.codec.ilbc.priority =
account.99.codec.pcmu.enable = account.99.codec.pcmu.priority =
account.99.codec.pcma.enable = account.99.codec.pcma.priority =
account.99.codec.opus.enable = account.99.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.99.nat.nat_traversal = account.99.nat.udp_update_enable = account.99.nat.udp_update_time = account.99.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.99.blf.subscribe_period = account.99.dtmf.type = account.99.dtmf.dtmf_payload = account.99.dtmf.info_type = account.99.100rel_enable = account.99.subscribe_register = account.99.subscribe_mwi = account.99.subscribe_mwi_expires = account.99.subscribe_mwi_to_vm = voice_mail.number.99 = %BWVOICE-PORTAL-NUMBER-99% account.99.display_mwi.enable = account.99.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 493 OF 1142
account.99.cid_source_privacy = account.99.cid_source_ppi = account.99.session_timer.enable = account.99.session_timer.expires = account.99.session_timer.refresher = account.99.enable_user_equal_phone = account.99.srtp_encryption = account.99.ptime = account.99.shared_line = %BWSHAREDLINE-BINARY-99% account.99.register_mac = account.99.register_line = account.99.reg_fail_retry_interval = account.99.reg_failed_retry_min_time = account.99.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.99.conf_type =
account.99.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-99%
account.99.sip_server_type = account.99.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.99.register_expires_overlap = account.99.subscribe_expires_overlap = account.99.auto_dial_enable = account.99.auto_dial_num = account.99.cp_source = account.99.transfer_refer_to_contact_header.enable = #V80 Add account.99.custom_ua = account.99.callpark_enable = account.99.check_cseq.enable = account.99.check_to_tag.enable = account.99.hold_use_inactive = account.99.line_seize.expires = account.99.update_ack_while_dialing = account.99.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.99.always_fwd.enable =
account.99.always_fwd.target =
account.99.always_fwd.off_code =
account.99.always_fwd.on_code =
account.99.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 494 OF 1142
account.99.busy_fwd.target = account.99.busy_fwd.off_code = account.99.busy_fwd.on_code = account.99.timeout_fwd.enable = account.99.timeout_fwd.target = account.99.timeout_fwd.timeout = account.99.timeout_fwd.off_code = account.99.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.99.dnd.enable =
account.99.dnd.on_code =
account.99.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.99.reg.enable =
handset.99.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.99.xsi.user =%BWLOGIN-ID-99% account.99.xsi.password =%XSIPASSWORD-99% account.99.xsi.host =%XSP_ADDRESS% account.99.xsi.server_type = account.99.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.99.ldap.enable =
handset.99.ldap.name_filter=
handset.99.ldap.number_filter=
handset.99.ldap.host=
handset.99.ldap.port=
handset.99.ldap.base=
handset.99.ldap.user=
handset.99.ldap.password=
handset.99.ldap.max_hits=
handset.99.ldap.name_attr=
handset.99.ldap.numb_attr=
handset.99.ldap.display_name=
handset.99.ldap.version=
handset.99.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 495 OF 1142
handset.99.ldap.ldap_sort= handset.99.ldap.tls_mode= handset.99.ldap.call_out_lookup= handset.99.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account100 Settings
##
##########################################################################
#############
account.100.enable=%BWLINE-BINARY-100% account.100.label=%BWEXTENSION-100% account.100.display_name=%BWCLID-100% account.100.auth_name=%BWAUTHUSER-100% account.100.user_name=%BWLINEPORT-100% account.100.password=%BWAUTHPASSWORD-100%
#W80B ADD account.100.sip_server.template = account.100.media_transmit.enable =
account.100.alarm.template = account.100.alarm.server = account.100.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.100.sip_server.1.failback_mode =
account.100.sip_server.1.failback_timeout =
account.100.sip_server.1.register_on_enable =
account.100.sip_server.1.failback_subscribe.enable =
account.100.sip_server.1.invite_retry_counts =
account.100.sip_server.1.only_signal_with_registered =
account.100.sip_server.2.failback_mode = account.100.sip_server.2.failback_timeout = account.100.sip_server.2.register_on_enable = account.100.sip_server.2.failback_subscribe.enable = account.100.sip_server.2.invite_retry_counts = account.100.sip_server.2.only_signal_with_registered =
account.100.naptr_build = account.100.fallback.redundancy_type = account.100.fallback.timeout =
account.100.dns_cache_type = account.100.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 496 OF 1142
account.100.anonymous_call = account.100.reject_anonymous_call = account.100.send_anonymous_code = account.100.anonymous_call_oncode = account.100.anonymous_call_offcode = account.100.send_anonymous_rejection_code = account.100.anonymous_reject_oncode = account.100.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.100.codec.g722.enable =
account.100.codec.g722.priority =
account.100.codec.g729.enable = account.100.codec.g729.priority =
account.100.codec.g726_16.enable = account.100.codec.g726_16.priority =
account.100.codec.g726_24.enable = account.100.codec.g726_24.priority =
account.100.codec.g726_32.enable = account.100.codec.g726_32.priority =
account.100.codec.g726_40.enable = account.100.codec.g726_40.priority =
account.100.codec.ilbc.enable = account.100.codec.ilbc.priority =
account.100.codec.pcmu.enable = account.100.codec.pcmu.priority =
account.100.codec.pcma.enable = account.100.codec.pcma.priority =
account.100.codec.opus.enable = account.100.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.100.nat.nat_traversal = account.100.nat.udp_update_enable = account.100.nat.udp_update_time = account.100.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 497 OF 1142
########################################################################## #############
account.100.blf.subscribe_period = account.100.dtmf.type = account.100.dtmf.dtmf_payload = account.100.dtmf.info_type = account.100.100rel_enable = account.100.subscribe_register = account.100.subscribe_mwi = account.100.subscribe_mwi_expires = account.100.subscribe_mwi_to_vm = voice_mail.number.100 = %BWVOICE-PORTAL-NUMBER-100% account.100.display_mwi.enable = account.100.cid_source = account.100.cid_source_privacy = account.100.cid_source_ppi = account.100.session_timer.enable = account.100.session_timer.expires = account.100.session_timer.refresher = account.100.enable_user_equal_phone = account.100.srtp_encryption = account.100.ptime = account.100.shared_line = %BWSHAREDLINE-BINARY-100% account.100.register_mac = account.100.register_line = account.100.reg_fail_retry_interval = account.100.reg_failed_retry_min_time = account.100.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.100.conf_type =
account.100.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-100%
account.100.sip_server_type = account.100.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.100.register_expires_overlap = account.100.subscribe_expires_overlap = account.100.auto_dial_enable = account.100.auto_dial_num = account.100.cp_source = account.100.transfer_refer_to_contact_header.enable = #V80 Add account.100.custom_ua = account.100.callpark_enable = account.100.check_cseq.enable = account.100.check_to_tag.enable = account.100.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 498 OF 1142
account.100.line_seize.expires = account.100.update_ack_while_dialing = account.100.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.100.always_fwd.enable =
account.100.always_fwd.target =
account.100.always_fwd.off_code =
account.100.always_fwd.on_code =
account.100.busy_fwd.enable =
account.100.busy_fwd.target =
account.100.busy_fwd.off_code =
account.100.busy_fwd.on_code =
account.100.timeout_fwd.enable =
account.100.timeout_fwd.target =
account.100.timeout_fwd.timeout =
account.100.timeout_fwd.off_code =
account.100.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.100.dnd.enable =
account.100.dnd.on_code =
account.100.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.100.reg.enable =
handset.100.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.100.xsi.user =%BWLOGIN-ID-100% account.100.xsi.password =%XSIPASSWORD-100% account.100.xsi.host =%XSP_ADDRESS% account.100.xsi.server_type = account.100.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 499 OF 1142
########################################################################## ############# handset.100.ldap.enable = handset.100.ldap.name_filter= handset.100.ldap.number_filter= handset.100.ldap.host= handset.100.ldap.port= handset.100.ldap.base= handset.100.ldap.user= handset.100.ldap.password= handset.100.ldap.max_hits= handset.100.ldap.name_attr= handset.100.ldap.numb_attr= handset.100.ldap.display_name= handset.100.ldap.version= handset.100.ldap.call_in_lookup= handset.100.ldap.ldap_sort= handset.100.ldap.tls_mode= handset.100.ldap.call_out_lookup= handset.100.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account101 Settings
##
##########################################################################
#############
account.101.enable=%BWLINE-BINARY-101% account.101.label=%BWEXTENSION-101% account.101.display_name=%BWCLID-101% account.101.auth_name=%BWAUTHUSER-101% account.101.user_name=%BWLINEPORT-101% account.101.password=%BWAUTHPASSWORD-101%
#W80B ADD account.101.sip_server.template = account.101.media_transmit.enable =
account.101.alarm.template = account.101.alarm.server = account.101.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.101.sip_server.1.failback_mode =
account.101.sip_server.1.failback_timeout =
account.101.sip_server.1.register_on_enable =
account.101.sip_server.1.failback_subscribe.enable =
account.101.sip_server.1.invite_retry_counts =
account.101.sip_server.1.only_signal_with_registered =
account.101.sip_server.2.failback_mode = account.101.sip_server.2.failback_timeout = account.101.sip_server.2.register_on_enable = account.101.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 500 OF 1142
account.101.sip_server.2.invite_retry_counts = account.101.sip_server.2.only_signal_with_registered =
account.101.naptr_build = account.101.fallback.redundancy_type = account.101.fallback.timeout =
account.101.dns_cache_type = account.101.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.101.anonymous_call =
account.101.reject_anonymous_call =
account.101.send_anonymous_code =
account.101.anonymous_call_oncode =
account.101.anonymous_call_offcode =
account.101.send_anonymous_rejection_code =
account.101.anonymous_reject_oncode =
account.101.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.101.codec.g722.enable =
account.101.codec.g722.priority =
account.101.codec.g729.enable = account.101.codec.g729.priority =
account.101.codec.g726_16.enable = account.101.codec.g726_16.priority =
account.101.codec.g726_24.enable = account.101.codec.g726_24.priority =
account.101.codec.g726_32.enable = account.101.codec.g726_32.priority =
account.101.codec.g726_40.enable = account.101.codec.g726_40.priority =
account.101.codec.ilbc.enable = account.101.codec.ilbc.priority =
account.101.codec.pcmu.enable = account.101.codec.pcmu.priority =
account.101.codec.pcma.enable = account.101.codec.pcma.priority =
account.101.codec.opus.enable = account.101.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 501 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.101.nat.nat_traversal = account.101.nat.udp_update_enable = account.101.nat.udp_update_time = account.101.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.101.blf.subscribe_period = account.101.dtmf.type = account.101.dtmf.dtmf_payload = account.101.dtmf.info_type = account.101.100rel_enable = account.101.subscribe_register = account.101.subscribe_mwi = account.101.subscribe_mwi_expires = account.101.subscribe_mwi_to_vm = voice_mail.number.101 = %BWVOICE-PORTAL-NUMBER-101% account.101.display_mwi.enable = account.101.cid_source = account.101.cid_source_privacy = account.101.cid_source_ppi = account.101.session_timer.enable = account.101.session_timer.expires = account.101.session_timer.refresher = account.101.enable_user_equal_phone = account.101.srtp_encryption = account.101.ptime = account.101.shared_line = %BWSHAREDLINE-BINARY-101% account.101.register_mac = account.101.register_line = account.101.reg_fail_retry_interval = account.101.reg_failed_retry_min_time = account.101.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.101.conf_type =
account.101.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-101%
account.101.sip_server_type = account.101.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 502 OF 1142
########################################################################## ############# ##DECT V81 Add
account.101.register_expires_overlap = account.101.subscribe_expires_overlap = account.101.auto_dial_enable = account.101.auto_dial_num = account.101.cp_source = account.101.transfer_refer_to_contact_header.enable = #V80 Add account.101.custom_ua = account.101.callpark_enable = account.101.check_cseq.enable = account.101.check_to_tag.enable = account.101.hold_use_inactive = account.101.line_seize.expires = account.101.update_ack_while_dialing = account.101.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.101.always_fwd.enable =
account.101.always_fwd.target =
account.101.always_fwd.off_code =
account.101.always_fwd.on_code =
account.101.busy_fwd.enable =
account.101.busy_fwd.target =
account.101.busy_fwd.off_code =
account.101.busy_fwd.on_code =
account.101.timeout_fwd.enable =
account.101.timeout_fwd.target =
account.101.timeout_fwd.timeout =
account.101.timeout_fwd.off_code =
account.101.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.101.dnd.enable =
account.101.dnd.on_code =
account.101.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.101.reg.enable =
handset.101.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 503 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.101.xsi.user =%BWLOGIN-ID-101% account.101.xsi.password =%XSIPASSWORD-101% account.101.xsi.host =%XSP_ADDRESS% account.101.xsi.server_type = account.101.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.101.ldap.enable =
handset.101.ldap.name_filter=
handset.101.ldap.number_filter=
handset.101.ldap.host=
handset.101.ldap.port=
handset.101.ldap.base=
handset.101.ldap.user=
handset.101.ldap.password=
handset.101.ldap.max_hits=
handset.101.ldap.name_attr=
handset.101.ldap.numb_attr=
handset.101.ldap.display_name=
handset.101.ldap.version=
handset.101.ldap.call_in_lookup=
handset.101.ldap.ldap_sort=
handset.101.ldap.tls_mode=
handset.101.ldap.call_out_lookup=
handset.101.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account102 Settings
##
##########################################################################
#############
account.102.enable=%BWLINE-BINARY-102% account.102.label=%BWEXTENSION-102% account.102.display_name=%BWCLID-102% account.102.auth_name=%BWAUTHUSER-102% account.102.user_name=%BWLINEPORT-102% account.102.password=%BWAUTHPASSWORD-102%
#W80B ADD account.102.sip_server.template = account.102.media_transmit.enable =
account.102.alarm.template = account.102.alarm.server = account.102.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 504 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.102.sip_server.1.failback_mode =
account.102.sip_server.1.failback_timeout =
account.102.sip_server.1.register_on_enable =
account.102.sip_server.1.failback_subscribe.enable =
account.102.sip_server.1.invite_retry_counts =
account.102.sip_server.1.only_signal_with_registered =
account.102.sip_server.2.failback_mode = account.102.sip_server.2.failback_timeout = account.102.sip_server.2.register_on_enable = account.102.sip_server.2.failback_subscribe.enable = account.102.sip_server.2.invite_retry_counts = account.102.sip_server.2.only_signal_with_registered =
account.102.naptr_build = account.102.fallback.redundancy_type = account.102.fallback.timeout =
account.102.dns_cache_type = account.102.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.102.anonymous_call =
account.102.reject_anonymous_call =
account.102.send_anonymous_code =
account.102.anonymous_call_oncode =
account.102.anonymous_call_offcode =
account.102.send_anonymous_rejection_code =
account.102.anonymous_reject_oncode =
account.102.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.102.codec.g722.enable =
account.102.codec.g722.priority =
account.102.codec.g729.enable = account.102.codec.g729.priority =
account.102.codec.g726_16.enable = account.102.codec.g726_16.priority =
account.102.codec.g726_24.enable = account.102.codec.g726_24.priority =
account.102.codec.g726_32.enable = account.102.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 505 OF 1142
account.102.codec.g726_40.enable = account.102.codec.g726_40.priority =
account.102.codec.ilbc.enable = account.102.codec.ilbc.priority =
account.102.codec.pcmu.enable = account.102.codec.pcmu.priority =
account.102.codec.pcma.enable = account.102.codec.pcma.priority =
account.102.codec.opus.enable = account.102.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.102.nat.nat_traversal = account.102.nat.udp_update_enable = account.102.nat.udp_update_time = account.102.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.102.blf.subscribe_period = account.102.dtmf.type = account.102.dtmf.dtmf_payload = account.102.dtmf.info_type = account.102.100rel_enable = account.102.subscribe_register = account.102.subscribe_mwi = account.102.subscribe_mwi_expires = account.102.subscribe_mwi_to_vm = voice_mail.number.102 = %BWVOICE-PORTAL-NUMBER-102% account.102.display_mwi.enable = account.102.cid_source = account.102.cid_source_privacy = account.102.cid_source_ppi = account.102.session_timer.enable = account.102.session_timer.expires = account.102.session_timer.refresher = account.102.enable_user_equal_phone = account.102.srtp_encryption = account.102.ptime = account.102.shared_line = %BWSHAREDLINE-BINARY-102% account.102.register_mac = account.102.register_line = account.102.reg_fail_retry_interval = account.102.reg_failed_retry_min_time = account.102.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 506 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.102.conf_type =
account.102.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-102%
account.102.sip_server_type = account.102.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.102.register_expires_overlap = account.102.subscribe_expires_overlap = account.102.auto_dial_enable = account.102.auto_dial_num = account.102.cp_source = account.102.transfer_refer_to_contact_header.enable = #V80 Add account.102.custom_ua = account.102.callpark_enable = account.102.check_cseq.enable = account.102.check_to_tag.enable = account.102.hold_use_inactive = account.102.line_seize.expires = account.102.update_ack_while_dialing = account.102.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.102.always_fwd.enable =
account.102.always_fwd.target =
account.102.always_fwd.off_code =
account.102.always_fwd.on_code =
account.102.busy_fwd.enable =
account.102.busy_fwd.target =
account.102.busy_fwd.off_code =
account.102.busy_fwd.on_code =
account.102.timeout_fwd.enable =
account.102.timeout_fwd.target =
account.102.timeout_fwd.timeout =
account.102.timeout_fwd.off_code =
account.102.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 507 OF 1142
account.102.dnd.enable = account.102.dnd.on_code = account.102.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.102.reg.enable =
handset.102.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.102.xsi.user =%BWLOGIN-ID-102% account.102.xsi.password =%XSIPASSWORD-102% account.102.xsi.host =%XSP_ADDRESS% account.102.xsi.server_type = account.102.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.102.ldap.enable =
handset.102.ldap.name_filter=
handset.102.ldap.number_filter=
handset.102.ldap.host=
handset.102.ldap.port=
handset.102.ldap.base=
handset.102.ldap.user=
handset.102.ldap.password=
handset.102.ldap.max_hits=
handset.102.ldap.name_attr=
handset.102.ldap.numb_attr=
handset.102.ldap.display_name=
handset.102.ldap.version=
handset.102.ldap.call_in_lookup=
handset.102.ldap.ldap_sort=
handset.102.ldap.tls_mode=
handset.102.ldap.call_out_lookup=
handset.102.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account103 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 508 OF 1142
account.103.enable=%BWLINE-BINARY-103% account.103.label=%BWEXTENSION-103% account.103.display_name=%BWCLID-103% account.103.auth_name=%BWAUTHUSER-103% account.103.user_name=%BWLINEPORT-103% account.103.password=%BWAUTHPASSWORD-103%
#W80B ADD account.103.sip_server.template = account.103.media_transmit.enable =
account.103.alarm.template = account.103.alarm.server = account.103.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.103.sip_server.1.failback_mode =
account.103.sip_server.1.failback_timeout =
account.103.sip_server.1.register_on_enable =
account.103.sip_server.1.failback_subscribe.enable =
account.103.sip_server.1.invite_retry_counts =
account.103.sip_server.1.only_signal_with_registered =
account.103.sip_server.2.failback_mode = account.103.sip_server.2.failback_timeout = account.103.sip_server.2.register_on_enable = account.103.sip_server.2.failback_subscribe.enable = account.103.sip_server.2.invite_retry_counts = account.103.sip_server.2.only_signal_with_registered =
account.103.naptr_build = account.103.fallback.redundancy_type = account.103.fallback.timeout =
account.103.dns_cache_type = account.103.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.103.anonymous_call =
account.103.reject_anonymous_call =
account.103.send_anonymous_code =
account.103.anonymous_call_oncode =
account.103.anonymous_call_offcode =
account.103.send_anonymous_rejection_code =
account.103.anonymous_reject_oncode =
account.103.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 509 OF 1142
########################################################################## ############# account.103.codec.g722.enable = account.103.codec.g722.priority =
account.103.codec.g729.enable = account.103.codec.g729.priority =
account.103.codec.g726_16.enable = account.103.codec.g726_16.priority =
account.103.codec.g726_24.enable = account.103.codec.g726_24.priority =
account.103.codec.g726_32.enable = account.103.codec.g726_32.priority =
account.103.codec.g726_40.enable = account.103.codec.g726_40.priority =
account.103.codec.ilbc.enable = account.103.codec.ilbc.priority =
account.103.codec.pcmu.enable = account.103.codec.pcmu.priority =
account.103.codec.pcma.enable = account.103.codec.pcma.priority =
account.103.codec.opus.enable = account.103.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.103.nat.nat_traversal = account.103.nat.udp_update_enable = account.103.nat.udp_update_time = account.103.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.103.blf.subscribe_period = account.103.dtmf.type = account.103.dtmf.dtmf_payload = account.103.dtmf.info_type = account.103.100rel_enable = account.103.subscribe_register = account.103.subscribe_mwi = account.103.subscribe_mwi_expires = account.103.subscribe_mwi_to_vm = voice_mail.number.103 = %BWVOICE-PORTAL-NUMBER-103% account.103.display_mwi.enable = account.103.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 510 OF 1142
account.103.cid_source_privacy = account.103.cid_source_ppi = account.103.session_timer.enable = account.103.session_timer.expires = account.103.session_timer.refresher = account.103.enable_user_equal_phone = account.103.srtp_encryption = account.103.ptime = account.103.shared_line = %BWSHAREDLINE-BINARY-103% account.103.register_mac = account.103.register_line = account.103.reg_fail_retry_interval = account.103.reg_failed_retry_min_time = account.103.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.103.conf_type =
account.103.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-103%
account.103.sip_server_type = account.103.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.103.register_expires_overlap = account.103.subscribe_expires_overlap = account.103.auto_dial_enable = account.103.auto_dial_num = account.103.cp_source = account.103.transfer_refer_to_contact_header.enable = #V80 Add account.103.custom_ua = account.103.callpark_enable = account.103.check_cseq.enable = account.103.check_to_tag.enable = account.103.hold_use_inactive = account.103.line_seize.expires = account.103.update_ack_while_dialing = account.103.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.103.always_fwd.enable =
account.103.always_fwd.target =
account.103.always_fwd.off_code =
account.103.always_fwd.on_code =
account.103.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 511 OF 1142
account.103.busy_fwd.target = account.103.busy_fwd.off_code = account.103.busy_fwd.on_code = account.103.timeout_fwd.enable = account.103.timeout_fwd.target = account.103.timeout_fwd.timeout = account.103.timeout_fwd.off_code = account.103.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.103.dnd.enable =
account.103.dnd.on_code =
account.103.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.103.reg.enable =
handset.103.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.103.xsi.user =%BWLOGIN-ID-103% account.103.xsi.password =%XSIPASSWORD-103% account.103.xsi.host =%XSP_ADDRESS% account.103.xsi.server_type = account.103.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.103.ldap.enable =
handset.103.ldap.name_filter=
handset.103.ldap.number_filter=
handset.103.ldap.host=
handset.103.ldap.port=
handset.103.ldap.base=
handset.103.ldap.user=
handset.103.ldap.password=
handset.103.ldap.max_hits=
handset.103.ldap.name_attr=
handset.103.ldap.numb_attr=
handset.103.ldap.display_name=
handset.103.ldap.version=
handset.103.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 512 OF 1142
handset.103.ldap.ldap_sort= handset.103.ldap.tls_mode= handset.103.ldap.call_out_lookup= handset.103.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account104 Settings
##
##########################################################################
#############
account.104.enable=%BWLINE-BINARY-104% account.104.label=%BWEXTENSION-104% account.104.display_name=%BWCLID-104% account.104.auth_name=%BWAUTHUSER-104% account.104.user_name=%BWLINEPORT-104% account.104.password=%BWAUTHPASSWORD-104%
#W80B ADD account.104.sip_server.template = account.104.media_transmit.enable =
account.104.alarm.template = account.104.alarm.server = account.104.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.104.sip_server.1.failback_mode =
account.104.sip_server.1.failback_timeout =
account.104.sip_server.1.register_on_enable =
account.104.sip_server.1.failback_subscribe.enable =
account.104.sip_server.1.invite_retry_counts =
account.104.sip_server.1.only_signal_with_registered =
account.104.sip_server.2.failback_mode = account.104.sip_server.2.failback_timeout = account.104.sip_server.2.register_on_enable = account.104.sip_server.2.failback_subscribe.enable = account.104.sip_server.2.invite_retry_counts = account.104.sip_server.2.only_signal_with_registered =
account.104.naptr_build = account.104.fallback.redundancy_type = account.104.fallback.timeout =
account.104.dns_cache_type = account.104.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 513 OF 1142
account.104.anonymous_call = account.104.reject_anonymous_call = account.104.send_anonymous_code = account.104.anonymous_call_oncode = account.104.anonymous_call_offcode = account.104.send_anonymous_rejection_code = account.104.anonymous_reject_oncode = account.104.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.104.codec.g722.enable =
account.104.codec.g722.priority =
account.104.codec.g729.enable = account.104.codec.g729.priority =
account.104.codec.g726_16.enable = account.104.codec.g726_16.priority =
account.104.codec.g726_24.enable = account.104.codec.g726_24.priority =
account.104.codec.g726_32.enable = account.104.codec.g726_32.priority =
account.104.codec.g726_40.enable = account.104.codec.g726_40.priority =
account.104.codec.ilbc.enable = account.104.codec.ilbc.priority =
account.104.codec.pcmu.enable = account.104.codec.pcmu.priority =
account.104.codec.pcma.enable = account.104.codec.pcma.priority =
account.104.codec.opus.enable = account.104.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.104.nat.nat_traversal = account.104.nat.udp_update_enable = account.104.nat.udp_update_time = account.104.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 514 OF 1142
########################################################################## #############
account.104.blf.subscribe_period = account.104.dtmf.type = account.104.dtmf.dtmf_payload = account.104.dtmf.info_type = account.104.100rel_enable = account.104.subscribe_register = account.104.subscribe_mwi = account.104.subscribe_mwi_expires = account.104.subscribe_mwi_to_vm = voice_mail.number.104 = %BWVOICE-PORTAL-NUMBER-104% account.104.display_mwi.enable = account.104.cid_source = account.104.cid_source_privacy = account.104.cid_source_ppi = account.104.session_timer.enable = account.104.session_timer.expires = account.104.session_timer.refresher = account.104.enable_user_equal_phone = account.104.srtp_encryption = account.104.ptime = account.104.shared_line = %BWSHAREDLINE-BINARY-104% account.104.register_mac = account.104.register_line = account.104.reg_fail_retry_interval = account.104.reg_failed_retry_min_time = account.104.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.104.conf_type =
account.104.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-104%
account.104.sip_server_type = account.104.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.104.register_expires_overlap = account.104.subscribe_expires_overlap = account.104.auto_dial_enable = account.104.auto_dial_num = account.104.cp_source = account.104.transfer_refer_to_contact_header.enable = #V80 Add account.104.custom_ua = account.104.callpark_enable = account.104.check_cseq.enable = account.104.check_to_tag.enable = account.104.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 515 OF 1142
account.104.line_seize.expires = account.104.update_ack_while_dialing = account.104.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.104.always_fwd.enable =
account.104.always_fwd.target =
account.104.always_fwd.off_code =
account.104.always_fwd.on_code =
account.104.busy_fwd.enable =
account.104.busy_fwd.target =
account.104.busy_fwd.off_code =
account.104.busy_fwd.on_code =
account.104.timeout_fwd.enable =
account.104.timeout_fwd.target =
account.104.timeout_fwd.timeout =
account.104.timeout_fwd.off_code =
account.104.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.104.dnd.enable =
account.104.dnd.on_code =
account.104.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.104.reg.enable =
handset.104.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.104.xsi.user =%BWLOGIN-ID-104% account.104.xsi.password =%XSIPASSWORD-104% account.104.xsi.host =%XSP_ADDRESS% account.104.xsi.server_type = account.104.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 516 OF 1142
########################################################################## ############# handset.104.ldap.enable = handset.104.ldap.name_filter= handset.104.ldap.number_filter= handset.104.ldap.host= handset.104.ldap.port= handset.104.ldap.base= handset.104.ldap.user= handset.104.ldap.password= handset.104.ldap.max_hits= handset.104.ldap.name_attr= handset.104.ldap.numb_attr= handset.104.ldap.display_name= handset.104.ldap.version= handset.104.ldap.call_in_lookup= handset.104.ldap.ldap_sort= handset.104.ldap.tls_mode= handset.104.ldap.call_out_lookup= handset.104.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account105 Settings
##
##########################################################################
#############
account.105.enable=%BWLINE-BINARY-105% account.105.label=%BWEXTENSION-105% account.105.display_name=%BWCLID-105% account.105.auth_name=%BWAUTHUSER-105% account.105.user_name=%BWLINEPORT-105% account.105.password=%BWAUTHPASSWORD-105%
#W80B ADD account.105.sip_server.template = account.105.media_transmit.enable =
account.105.alarm.template = account.105.alarm.server = account.105.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.105.sip_server.1.failback_mode =
account.105.sip_server.1.failback_timeout =
account.105.sip_server.1.register_on_enable =
account.105.sip_server.1.failback_subscribe.enable =
account.105.sip_server.1.invite_retry_counts =
account.105.sip_server.1.only_signal_with_registered =
account.105.sip_server.2.failback_mode = account.105.sip_server.2.failback_timeout = account.105.sip_server.2.register_on_enable = account.105.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 517 OF 1142
account.105.sip_server.2.invite_retry_counts = account.105.sip_server.2.only_signal_with_registered =
account.105.naptr_build = account.105.fallback.redundancy_type = account.105.fallback.timeout =
account.105.dns_cache_type = account.105.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.105.anonymous_call =
account.105.reject_anonymous_call =
account.105.send_anonymous_code =
account.105.anonymous_call_oncode =
account.105.anonymous_call_offcode =
account.105.send_anonymous_rejection_code =
account.105.anonymous_reject_oncode =
account.105.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.105.codec.g722.enable =
account.105.codec.g722.priority =
account.105.codec.g729.enable = account.105.codec.g729.priority =
account.105.codec.g726_16.enable = account.105.codec.g726_16.priority =
account.105.codec.g726_24.enable = account.105.codec.g726_24.priority =
account.105.codec.g726_32.enable = account.105.codec.g726_32.priority =
account.105.codec.g726_40.enable = account.105.codec.g726_40.priority =
account.105.codec.ilbc.enable = account.105.codec.ilbc.priority =
account.105.codec.pcmu.enable = account.105.codec.pcmu.priority =
account.105.codec.pcma.enable = account.105.codec.pcma.priority =
account.105.codec.opus.enable = account.105.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 518 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.105.nat.nat_traversal = account.105.nat.udp_update_enable = account.105.nat.udp_update_time = account.105.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.105.blf.subscribe_period = account.105.dtmf.type = account.105.dtmf.dtmf_payload = account.105.dtmf.info_type = account.105.100rel_enable = account.105.subscribe_register = account.105.subscribe_mwi = account.105.subscribe_mwi_expires = account.105.subscribe_mwi_to_vm = voice_mail.number.105 = %BWVOICE-PORTAL-NUMBER-105% account.105.display_mwi.enable = account.105.cid_source = account.105.cid_source_privacy = account.105.cid_source_ppi = account.105.session_timer.enable = account.105.session_timer.expires = account.105.session_timer.refresher = account.105.enable_user_equal_phone = account.105.srtp_encryption = account.105.ptime = account.105.shared_line = %BWSHAREDLINE-BINARY-105% account.105.register_mac = account.105.register_line = account.105.reg_fail_retry_interval = account.105.reg_failed_retry_min_time = account.105.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.105.conf_type =
account.105.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-105%
account.105.sip_server_type = account.105.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 519 OF 1142
########################################################################## ############# ##DECT V81 Add
account.105.register_expires_overlap = account.105.subscribe_expires_overlap = account.105.auto_dial_enable = account.105.auto_dial_num = account.105.cp_source = account.105.transfer_refer_to_contact_header.enable = #V80 Add account.105.custom_ua = account.105.callpark_enable = account.105.check_cseq.enable = account.105.check_to_tag.enable = account.105.hold_use_inactive = account.105.line_seize.expires = account.105.update_ack_while_dialing = account.105.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.105.always_fwd.enable =
account.105.always_fwd.target =
account.105.always_fwd.off_code =
account.105.always_fwd.on_code =
account.105.busy_fwd.enable =
account.105.busy_fwd.target =
account.105.busy_fwd.off_code =
account.105.busy_fwd.on_code =
account.105.timeout_fwd.enable =
account.105.timeout_fwd.target =
account.105.timeout_fwd.timeout =
account.105.timeout_fwd.off_code =
account.105.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.105.dnd.enable =
account.105.dnd.on_code =
account.105.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.105.reg.enable =
handset.105.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 520 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.105.xsi.user =%BWLOGIN-ID-105% account.105.xsi.password =%XSIPASSWORD-105% account.105.xsi.host =%XSP_ADDRESS% account.105.xsi.server_type = account.105.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.105.ldap.enable =
handset.105.ldap.name_filter=
handset.105.ldap.number_filter=
handset.105.ldap.host=
handset.105.ldap.port=
handset.105.ldap.base=
handset.105.ldap.user=
handset.105.ldap.password=
handset.105.ldap.max_hits=
handset.105.ldap.name_attr=
handset.105.ldap.numb_attr=
handset.105.ldap.display_name=
handset.105.ldap.version=
handset.105.ldap.call_in_lookup=
handset.105.ldap.ldap_sort=
handset.105.ldap.tls_mode=
handset.105.ldap.call_out_lookup=
handset.105.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account106 Settings
##
##########################################################################
#############
account.106.enable=%BWLINE-BINARY-106% account.106.label=%BWEXTENSION-106% account.106.display_name=%BWCLID-106% account.106.auth_name=%BWAUTHUSER-106% account.106.user_name=%BWLINEPORT-106% account.106.password=%BWAUTHPASSWORD-106%
#W80B ADD account.106.sip_server.template = account.106.media_transmit.enable =
account.106.alarm.template = account.106.alarm.server = account.106.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 521 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.106.sip_server.1.failback_mode =
account.106.sip_server.1.failback_timeout =
account.106.sip_server.1.register_on_enable =
account.106.sip_server.1.failback_subscribe.enable =
account.106.sip_server.1.invite_retry_counts =
account.106.sip_server.1.only_signal_with_registered =
account.106.sip_server.2.failback_mode = account.106.sip_server.2.failback_timeout = account.106.sip_server.2.register_on_enable = account.106.sip_server.2.failback_subscribe.enable = account.106.sip_server.2.invite_retry_counts = account.106.sip_server.2.only_signal_with_registered =
account.106.naptr_build = account.106.fallback.redundancy_type = account.106.fallback.timeout =
account.106.dns_cache_type = account.106.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.106.anonymous_call =
account.106.reject_anonymous_call =
account.106.send_anonymous_code =
account.106.anonymous_call_oncode =
account.106.anonymous_call_offcode =
account.106.send_anonymous_rejection_code =
account.106.anonymous_reject_oncode =
account.106.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.106.codec.g722.enable =
account.106.codec.g722.priority =
account.106.codec.g729.enable = account.106.codec.g729.priority =
account.106.codec.g726_16.enable = account.106.codec.g726_16.priority =
account.106.codec.g726_24.enable = account.106.codec.g726_24.priority =
account.106.codec.g726_32.enable = account.106.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 522 OF 1142
account.106.codec.g726_40.enable = account.106.codec.g726_40.priority =
account.106.codec.ilbc.enable = account.106.codec.ilbc.priority =
account.106.codec.pcmu.enable = account.106.codec.pcmu.priority =
account.106.codec.pcma.enable = account.106.codec.pcma.priority =
account.106.codec.opus.enable = account.106.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.106.nat.nat_traversal = account.106.nat.udp_update_enable = account.106.nat.udp_update_time = account.106.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.106.blf.subscribe_period = account.106.dtmf.type = account.106.dtmf.dtmf_payload = account.106.dtmf.info_type = account.106.100rel_enable = account.106.subscribe_register = account.106.subscribe_mwi = account.106.subscribe_mwi_expires = account.106.subscribe_mwi_to_vm = voice_mail.number.106 = %BWVOICE-PORTAL-NUMBER-106% account.106.display_mwi.enable = account.106.cid_source = account.106.cid_source_privacy = account.106.cid_source_ppi = account.106.session_timer.enable = account.106.session_timer.expires = account.106.session_timer.refresher = account.106.enable_user_equal_phone = account.106.srtp_encryption = account.106.ptime = account.106.shared_line = %BWSHAREDLINE-BINARY-106% account.106.register_mac = account.106.register_line = account.106.reg_fail_retry_interval = account.106.reg_failed_retry_min_time = account.106.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 523 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.106.conf_type =
account.106.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-106%
account.106.sip_server_type = account.106.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.106.register_expires_overlap = account.106.subscribe_expires_overlap = account.106.auto_dial_enable = account.106.auto_dial_num = account.106.cp_source = account.106.transfer_refer_to_contact_header.enable = #V80 Add account.106.custom_ua = account.106.callpark_enable = account.106.check_cseq.enable = account.106.check_to_tag.enable = account.106.hold_use_inactive = account.106.line_seize.expires = account.106.update_ack_while_dialing = account.106.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.106.always_fwd.enable =
account.106.always_fwd.target =
account.106.always_fwd.off_code =
account.106.always_fwd.on_code =
account.106.busy_fwd.enable =
account.106.busy_fwd.target =
account.106.busy_fwd.off_code =
account.106.busy_fwd.on_code =
account.106.timeout_fwd.enable =
account.106.timeout_fwd.target =
account.106.timeout_fwd.timeout =
account.106.timeout_fwd.off_code =
account.106.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 524 OF 1142
account.106.dnd.enable = account.106.dnd.on_code = account.106.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.106.reg.enable =
handset.106.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.106.xsi.user =%BWLOGIN-ID-106% account.106.xsi.password =%XSIPASSWORD-106% account.106.xsi.host =%XSP_ADDRESS% account.106.xsi.server_type = account.106.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.106.ldap.enable =
handset.106.ldap.name_filter=
handset.106.ldap.number_filter=
handset.106.ldap.host=
handset.106.ldap.port=
handset.106.ldap.base=
handset.106.ldap.user=
handset.106.ldap.password=
handset.106.ldap.max_hits=
handset.106.ldap.name_attr=
handset.106.ldap.numb_attr=
handset.106.ldap.display_name=
handset.106.ldap.version=
handset.106.ldap.call_in_lookup=
handset.106.ldap.ldap_sort=
handset.106.ldap.tls_mode=
handset.106.ldap.call_out_lookup=
handset.106.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account107 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 525 OF 1142
account.107.enable=%BWLINE-BINARY-107% account.107.label=%BWEXTENSION-107% account.107.display_name=%BWCLID-107% account.107.auth_name=%BWAUTHUSER-107% account.107.user_name=%BWLINEPORT-107% account.107.password=%BWAUTHPASSWORD-107%
#W80B ADD account.107.sip_server.template = account.107.media_transmit.enable =
account.107.alarm.template = account.107.alarm.server = account.107.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.107.sip_server.1.failback_mode =
account.107.sip_server.1.failback_timeout =
account.107.sip_server.1.register_on_enable =
account.107.sip_server.1.failback_subscribe.enable =
account.107.sip_server.1.invite_retry_counts =
account.107.sip_server.1.only_signal_with_registered =
account.107.sip_server.2.failback_mode = account.107.sip_server.2.failback_timeout = account.107.sip_server.2.register_on_enable = account.107.sip_server.2.failback_subscribe.enable = account.107.sip_server.2.invite_retry_counts = account.107.sip_server.2.only_signal_with_registered =
account.107.naptr_build = account.107.fallback.redundancy_type = account.107.fallback.timeout =
account.107.dns_cache_type = account.107.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.107.anonymous_call =
account.107.reject_anonymous_call =
account.107.send_anonymous_code =
account.107.anonymous_call_oncode =
account.107.anonymous_call_offcode =
account.107.send_anonymous_rejection_code =
account.107.anonymous_reject_oncode =
account.107.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 526 OF 1142
########################################################################## ############# account.107.codec.g722.enable = account.107.codec.g722.priority =
account.107.codec.g729.enable = account.107.codec.g729.priority =
account.107.codec.g726_16.enable = account.107.codec.g726_16.priority =
account.107.codec.g726_24.enable = account.107.codec.g726_24.priority =
account.107.codec.g726_32.enable = account.107.codec.g726_32.priority =
account.107.codec.g726_40.enable = account.107.codec.g726_40.priority =
account.107.codec.ilbc.enable = account.107.codec.ilbc.priority =
account.107.codec.pcmu.enable = account.107.codec.pcmu.priority =
account.107.codec.pcma.enable = account.107.codec.pcma.priority =
account.107.codec.opus.enable = account.107.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.107.nat.nat_traversal = account.107.nat.udp_update_enable = account.107.nat.udp_update_time = account.107.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.107.blf.subscribe_period = account.107.dtmf.type = account.107.dtmf.dtmf_payload = account.107.dtmf.info_type = account.107.100rel_enable = account.107.subscribe_register = account.107.subscribe_mwi = account.107.subscribe_mwi_expires = account.107.subscribe_mwi_to_vm = voice_mail.number.107 = %BWVOICE-PORTAL-NUMBER-107% account.107.display_mwi.enable = account.107.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 527 OF 1142
account.107.cid_source_privacy = account.107.cid_source_ppi = account.107.session_timer.enable = account.107.session_timer.expires = account.107.session_timer.refresher = account.107.enable_user_equal_phone = account.107.srtp_encryption = account.107.ptime = account.107.shared_line = %BWSHAREDLINE-BINARY-107% account.107.register_mac = account.107.register_line = account.107.reg_fail_retry_interval = account.107.reg_failed_retry_min_time = account.107.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.107.conf_type =
account.107.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-107%
account.107.sip_server_type = account.107.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.107.register_expires_overlap = account.107.subscribe_expires_overlap = account.107.auto_dial_enable = account.107.auto_dial_num = account.107.cp_source = account.107.transfer_refer_to_contact_header.enable = #V80 Add account.107.custom_ua = account.107.callpark_enable = account.107.check_cseq.enable = account.107.check_to_tag.enable = account.107.hold_use_inactive = account.107.line_seize.expires = account.107.update_ack_while_dialing = account.107.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.107.always_fwd.enable =
account.107.always_fwd.target =
account.107.always_fwd.off_code =
account.107.always_fwd.on_code =
account.107.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 528 OF 1142
account.107.busy_fwd.target = account.107.busy_fwd.off_code = account.107.busy_fwd.on_code = account.107.timeout_fwd.enable = account.107.timeout_fwd.target = account.107.timeout_fwd.timeout = account.107.timeout_fwd.off_code = account.107.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.107.dnd.enable =
account.107.dnd.on_code =
account.107.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.107.reg.enable =
handset.107.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.107.xsi.user =%BWLOGIN-ID-107% account.107.xsi.password =%XSIPASSWORD-107% account.107.xsi.host =%XSP_ADDRESS% account.107.xsi.server_type = account.107.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.107.ldap.enable =
handset.107.ldap.name_filter=
handset.107.ldap.number_filter=
handset.107.ldap.host=
handset.107.ldap.port=
handset.107.ldap.base=
handset.107.ldap.user=
handset.107.ldap.password=
handset.107.ldap.max_hits=
handset.107.ldap.name_attr=
handset.107.ldap.numb_attr=
handset.107.ldap.display_name=
handset.107.ldap.version=
handset.107.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 529 OF 1142
handset.107.ldap.ldap_sort= handset.107.ldap.tls_mode= handset.107.ldap.call_out_lookup= handset.107.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account108 Settings
##
##########################################################################
#############
account.108.enable=%BWLINE-BINARY-108% account.108.label=%BWEXTENSION-108% account.108.display_name=%BWCLID-108% account.108.auth_name=%BWAUTHUSER-108% account.108.user_name=%BWLINEPORT-108% account.108.password=%BWAUTHPASSWORD-108%
#W80B ADD account.108.sip_server.template = account.108.media_transmit.enable =
account.108.alarm.template = account.108.alarm.server = account.108.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.108.sip_server.1.failback_mode =
account.108.sip_server.1.failback_timeout =
account.108.sip_server.1.register_on_enable =
account.108.sip_server.1.failback_subscribe.enable =
account.108.sip_server.1.invite_retry_counts =
account.108.sip_server.1.only_signal_with_registered =
account.108.sip_server.2.failback_mode = account.108.sip_server.2.failback_timeout = account.108.sip_server.2.register_on_enable = account.108.sip_server.2.failback_subscribe.enable = account.108.sip_server.2.invite_retry_counts = account.108.sip_server.2.only_signal_with_registered =
account.108.naptr_build = account.108.fallback.redundancy_type = account.108.fallback.timeout =
account.108.dns_cache_type = account.108.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 530 OF 1142
account.108.anonymous_call = account.108.reject_anonymous_call = account.108.send_anonymous_code = account.108.anonymous_call_oncode = account.108.anonymous_call_offcode = account.108.send_anonymous_rejection_code = account.108.anonymous_reject_oncode = account.108.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.108.codec.g722.enable =
account.108.codec.g722.priority =
account.108.codec.g729.enable = account.108.codec.g729.priority =
account.108.codec.g726_16.enable = account.108.codec.g726_16.priority =
account.108.codec.g726_24.enable = account.108.codec.g726_24.priority =
account.108.codec.g726_32.enable = account.108.codec.g726_32.priority =
account.108.codec.g726_40.enable = account.108.codec.g726_40.priority =
account.108.codec.ilbc.enable = account.108.codec.ilbc.priority =
account.108.codec.pcmu.enable = account.108.codec.pcmu.priority =
account.108.codec.pcma.enable = account.108.codec.pcma.priority =
account.108.codec.opus.enable = account.108.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.108.nat.nat_traversal = account.108.nat.udp_update_enable = account.108.nat.udp_update_time = account.108.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 531 OF 1142
########################################################################## #############
account.108.blf.subscribe_period = account.108.dtmf.type = account.108.dtmf.dtmf_payload = account.108.dtmf.info_type = account.108.100rel_enable = account.108.subscribe_register = account.108.subscribe_mwi = account.108.subscribe_mwi_expires = account.108.subscribe_mwi_to_vm = voice_mail.number.108 = %BWVOICE-PORTAL-NUMBER-108% account.108.display_mwi.enable = account.108.cid_source = account.108.cid_source_privacy = account.108.cid_source_ppi = account.108.session_timer.enable = account.108.session_timer.expires = account.108.session_timer.refresher = account.108.enable_user_equal_phone = account.108.srtp_encryption = account.108.ptime = account.108.shared_line = %BWSHAREDLINE-BINARY-108% account.108.register_mac = account.108.register_line = account.108.reg_fail_retry_interval = account.108.reg_failed_retry_min_time = account.108.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.108.conf_type =
account.108.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-108%
account.108.sip_server_type = account.108.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.108.register_expires_overlap = account.108.subscribe_expires_overlap = account.108.auto_dial_enable = account.108.auto_dial_num = account.108.cp_source = account.108.transfer_refer_to_contact_header.enable = #V80 Add account.108.custom_ua = account.108.callpark_enable = account.108.check_cseq.enable = account.108.check_to_tag.enable = account.108.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 532 OF 1142
account.108.line_seize.expires = account.108.update_ack_while_dialing = account.108.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.108.always_fwd.enable =
account.108.always_fwd.target =
account.108.always_fwd.off_code =
account.108.always_fwd.on_code =
account.108.busy_fwd.enable =
account.108.busy_fwd.target =
account.108.busy_fwd.off_code =
account.108.busy_fwd.on_code =
account.108.timeout_fwd.enable =
account.108.timeout_fwd.target =
account.108.timeout_fwd.timeout =
account.108.timeout_fwd.off_code =
account.108.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.108.dnd.enable =
account.108.dnd.on_code =
account.108.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.108.reg.enable =
handset.108.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.108.xsi.user =%BWLOGIN-ID-108% account.108.xsi.password =%XSIPASSWORD-108% account.108.xsi.host =%XSP_ADDRESS% account.108.xsi.server_type = account.108.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 533 OF 1142
########################################################################## ############# handset.108.ldap.enable = handset.108.ldap.name_filter= handset.108.ldap.number_filter= handset.108.ldap.host= handset.108.ldap.port= handset.108.ldap.base= handset.108.ldap.user= handset.108.ldap.password= handset.108.ldap.max_hits= handset.108.ldap.name_attr= handset.108.ldap.numb_attr= handset.108.ldap.display_name= handset.108.ldap.version= handset.108.ldap.call_in_lookup= handset.108.ldap.ldap_sort= handset.108.ldap.tls_mode= handset.108.ldap.call_out_lookup= handset.108.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account109 Settings
##
##########################################################################
#############
account.109.enable=%BWLINE-BINARY-109% account.109.label=%BWEXTENSION-109% account.109.display_name=%BWCLID-109% account.109.auth_name=%BWAUTHUSER-109% account.109.user_name=%BWLINEPORT-109% account.109.password=%BWAUTHPASSWORD-109%
#W80B ADD account.109.sip_server.template = account.109.media_transmit.enable =
account.109.alarm.template = account.109.alarm.server = account.109.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.109.sip_server.1.failback_mode =
account.109.sip_server.1.failback_timeout =
account.109.sip_server.1.register_on_enable =
account.109.sip_server.1.failback_subscribe.enable =
account.109.sip_server.1.invite_retry_counts =
account.109.sip_server.1.only_signal_with_registered =
account.109.sip_server.2.failback_mode = account.109.sip_server.2.failback_timeout = account.109.sip_server.2.register_on_enable = account.109.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 534 OF 1142
account.109.sip_server.2.invite_retry_counts = account.109.sip_server.2.only_signal_with_registered =
account.109.naptr_build = account.109.fallback.redundancy_type = account.109.fallback.timeout =
account.109.dns_cache_type = account.109.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.109.anonymous_call =
account.109.reject_anonymous_call =
account.109.send_anonymous_code =
account.109.anonymous_call_oncode =
account.109.anonymous_call_offcode =
account.109.send_anonymous_rejection_code =
account.109.anonymous_reject_oncode =
account.109.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.109.codec.g722.enable =
account.109.codec.g722.priority =
account.109.codec.g729.enable = account.109.codec.g729.priority =
account.109.codec.g726_16.enable = account.109.codec.g726_16.priority =
account.109.codec.g726_24.enable = account.109.codec.g726_24.priority =
account.109.codec.g726_32.enable = account.109.codec.g726_32.priority =
account.109.codec.g726_40.enable = account.109.codec.g726_40.priority =
account.109.codec.ilbc.enable = account.109.codec.ilbc.priority =
account.109.codec.pcmu.enable = account.109.codec.pcmu.priority =
account.109.codec.pcma.enable = account.109.codec.pcma.priority =
account.109.codec.opus.enable = account.109.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 535 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.109.nat.nat_traversal = account.109.nat.udp_update_enable = account.109.nat.udp_update_time = account.109.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.109.blf.subscribe_period = account.109.dtmf.type = account.109.dtmf.dtmf_payload = account.109.dtmf.info_type = account.109.100rel_enable = account.109.subscribe_register = account.109.subscribe_mwi = account.109.subscribe_mwi_expires = account.109.subscribe_mwi_to_vm = voice_mail.number.109 = %BWVOICE-PORTAL-NUMBER-109% account.109.display_mwi.enable = account.109.cid_source = account.109.cid_source_privacy = account.109.cid_source_ppi = account.109.session_timer.enable = account.109.session_timer.expires = account.109.session_timer.refresher = account.109.enable_user_equal_phone = account.109.srtp_encryption = account.109.ptime = account.109.shared_line = %BWSHAREDLINE-BINARY-109% account.109.register_mac = account.109.register_line = account.109.reg_fail_retry_interval = account.109.reg_failed_retry_min_time = account.109.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.109.conf_type =
account.109.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-109%
account.109.sip_server_type = account.109.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 536 OF 1142
########################################################################## ############# ##DECT V81 Add
account.109.register_expires_overlap = account.109.subscribe_expires_overlap = account.109.auto_dial_enable = account.109.auto_dial_num = account.109.cp_source = account.109.transfer_refer_to_contact_header.enable = #V80 Add account.109.custom_ua = account.109.callpark_enable = account.109.check_cseq.enable = account.109.check_to_tag.enable = account.109.hold_use_inactive = account.109.line_seize.expires = account.109.update_ack_while_dialing = account.109.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.109.always_fwd.enable =
account.109.always_fwd.target =
account.109.always_fwd.off_code =
account.109.always_fwd.on_code =
account.109.busy_fwd.enable =
account.109.busy_fwd.target =
account.109.busy_fwd.off_code =
account.109.busy_fwd.on_code =
account.109.timeout_fwd.enable =
account.109.timeout_fwd.target =
account.109.timeout_fwd.timeout =
account.109.timeout_fwd.off_code =
account.109.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.109.dnd.enable =
account.109.dnd.on_code =
account.109.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.109.reg.enable =
handset.109.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 537 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.109.xsi.user =%BWLOGIN-ID-109% account.109.xsi.password =%XSIPASSWORD-109% account.109.xsi.host =%XSP_ADDRESS% account.109.xsi.server_type = account.109.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.109.ldap.enable =
handset.109.ldap.name_filter=
handset.109.ldap.number_filter=
handset.109.ldap.host=
handset.109.ldap.port=
handset.109.ldap.base=
handset.109.ldap.user=
handset.109.ldap.password=
handset.109.ldap.max_hits=
handset.109.ldap.name_attr=
handset.109.ldap.numb_attr=
handset.109.ldap.display_name=
handset.109.ldap.version=
handset.109.ldap.call_in_lookup=
handset.109.ldap.ldap_sort=
handset.109.ldap.tls_mode=
handset.109.ldap.call_out_lookup=
handset.109.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account110 Settings
##
##########################################################################
#############
account.110.enable=%BWLINE-BINARY-110% account.110.label=%BWEXTENSION-110% account.110.display_name=%BWCLID-110% account.110.auth_name=%BWAUTHUSER-110% account.110.user_name=%BWLINEPORT-110% account.110.password=%BWAUTHPASSWORD-110%
#W80B ADD account.110.sip_server.template = account.110.media_transmit.enable =
account.110.alarm.template = account.110.alarm.server = account.110.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 538 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.110.sip_server.1.failback_mode =
account.110.sip_server.1.failback_timeout =
account.110.sip_server.1.register_on_enable =
account.110.sip_server.1.failback_subscribe.enable =
account.110.sip_server.1.invite_retry_counts =
account.110.sip_server.1.only_signal_with_registered =
account.110.sip_server.2.failback_mode = account.110.sip_server.2.failback_timeout = account.110.sip_server.2.register_on_enable = account.110.sip_server.2.failback_subscribe.enable = account.110.sip_server.2.invite_retry_counts = account.110.sip_server.2.only_signal_with_registered =
account.110.naptr_build = account.110.fallback.redundancy_type = account.110.fallback.timeout =
account.110.dns_cache_type = account.110.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.110.anonymous_call =
account.110.reject_anonymous_call =
account.110.send_anonymous_code =
account.110.anonymous_call_oncode =
account.110.anonymous_call_offcode =
account.110.send_anonymous_rejection_code =
account.110.anonymous_reject_oncode =
account.110.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.110.codec.g722.enable =
account.110.codec.g722.priority =
account.110.codec.g729.enable = account.110.codec.g729.priority =
account.110.codec.g726_16.enable = account.110.codec.g726_16.priority =
account.110.codec.g726_24.enable = account.110.codec.g726_24.priority =
account.110.codec.g726_32.enable = account.110.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 539 OF 1142
account.110.codec.g726_40.enable = account.110.codec.g726_40.priority =
account.110.codec.ilbc.enable = account.110.codec.ilbc.priority =
account.110.codec.pcmu.enable = account.110.codec.pcmu.priority =
account.110.codec.pcma.enable = account.110.codec.pcma.priority =
account.110.codec.opus.enable = account.110.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.110.nat.nat_traversal = account.110.nat.udp_update_enable = account.110.nat.udp_update_time = account.110.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.110.blf.subscribe_period = account.110.dtmf.type = account.110.dtmf.dtmf_payload = account.110.dtmf.info_type = account.110.100rel_enable = account.110.subscribe_register = account.110.subscribe_mwi = account.110.subscribe_mwi_expires = account.110.subscribe_mwi_to_vm = voice_mail.number.110 = %BWVOICE-PORTAL-NUMBER-110% account.110.display_mwi.enable = account.110.cid_source = account.110.cid_source_privacy = account.110.cid_source_ppi = account.110.session_timer.enable = account.110.session_timer.expires = account.110.session_timer.refresher = account.110.enable_user_equal_phone = account.110.srtp_encryption = account.110.ptime = account.110.shared_line = %BWSHAREDLINE-BINARY-110% account.110.register_mac = account.110.register_line = account.110.reg_fail_retry_interval = account.110.reg_failed_retry_min_time = account.110.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 540 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.110.conf_type =
account.110.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-110%
account.110.sip_server_type = account.110.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.110.register_expires_overlap = account.110.subscribe_expires_overlap = account.110.auto_dial_enable = account.110.auto_dial_num = account.110.cp_source = account.110.transfer_refer_to_contact_header.enable = #V80 Add account.110.custom_ua = account.110.callpark_enable = account.110.check_cseq.enable = account.110.check_to_tag.enable = account.110.hold_use_inactive = account.110.line_seize.expires = account.110.update_ack_while_dialing = account.110.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.110.always_fwd.enable =
account.110.always_fwd.target =
account.110.always_fwd.off_code =
account.110.always_fwd.on_code =
account.110.busy_fwd.enable =
account.110.busy_fwd.target =
account.110.busy_fwd.off_code =
account.110.busy_fwd.on_code =
account.110.timeout_fwd.enable =
account.110.timeout_fwd.target =
account.110.timeout_fwd.timeout =
account.110.timeout_fwd.off_code =
account.110.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 541 OF 1142
account.110.dnd.enable = account.110.dnd.on_code = account.110.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.110.reg.enable =
handset.110.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.110.xsi.user =%BWLOGIN-ID-110% account.110.xsi.password =%XSIPASSWORD-110% account.110.xsi.host =%XSP_ADDRESS% account.110.xsi.server_type = account.110.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.110.ldap.enable =
handset.110.ldap.name_filter=
handset.110.ldap.number_filter=
handset.110.ldap.host=
handset.110.ldap.port=
handset.110.ldap.base=
handset.110.ldap.user=
handset.110.ldap.password=
handset.110.ldap.max_hits=
handset.110.ldap.name_attr=
handset.110.ldap.numb_attr=
handset.110.ldap.display_name=
handset.110.ldap.version=
handset.110.ldap.call_in_lookup=
handset.110.ldap.ldap_sort=
handset.110.ldap.tls_mode=
handset.110.ldap.call_out_lookup=
handset.110.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account111 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 542 OF 1142
account.111.enable=%BWLINE-BINARY-111% account.111.label=%BWEXTENSION-111% account.111.display_name=%BWCLID-111% account.111.auth_name=%BWAUTHUSER-111% account.111.user_name=%BWLINEPORT-111% account.111.password=%BWAUTHPASSWORD-111%
#W80B ADD account.111.sip_server.template = account.111.media_transmit.enable =
account.111.alarm.template = account.111.alarm.server = account.111.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.111.sip_server.1.failback_mode =
account.111.sip_server.1.failback_timeout =
account.111.sip_server.1.register_on_enable =
account.111.sip_server.1.failback_subscribe.enable =
account.111.sip_server.1.invite_retry_counts =
account.111.sip_server.1.only_signal_with_registered =
account.111.sip_server.2.failback_mode = account.111.sip_server.2.failback_timeout = account.111.sip_server.2.register_on_enable = account.111.sip_server.2.failback_subscribe.enable = account.111.sip_server.2.invite_retry_counts = account.111.sip_server.2.only_signal_with_registered =
account.111.naptr_build = account.111.fallback.redundancy_type = account.111.fallback.timeout =
account.111.dns_cache_type = account.111.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.111.anonymous_call =
account.111.reject_anonymous_call =
account.111.send_anonymous_code =
account.111.anonymous_call_oncode =
account.111.anonymous_call_offcode =
account.111.send_anonymous_rejection_code =
account.111.anonymous_reject_oncode =
account.111.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 543 OF 1142
########################################################################## ############# account.111.codec.g722.enable = account.111.codec.g722.priority =
account.111.codec.g729.enable = account.111.codec.g729.priority =
account.111.codec.g726_16.enable = account.111.codec.g726_16.priority =
account.111.codec.g726_24.enable = account.111.codec.g726_24.priority =
account.111.codec.g726_32.enable = account.111.codec.g726_32.priority =
account.111.codec.g726_40.enable = account.111.codec.g726_40.priority =
account.111.codec.ilbc.enable = account.111.codec.ilbc.priority =
account.111.codec.pcmu.enable = account.111.codec.pcmu.priority =
account.111.codec.pcma.enable = account.111.codec.pcma.priority =
account.111.codec.opus.enable = account.111.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.111.nat.nat_traversal = account.111.nat.udp_update_enable = account.111.nat.udp_update_time = account.111.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.111.blf.subscribe_period = account.111.dtmf.type = account.111.dtmf.dtmf_payload = account.111.dtmf.info_type = account.111.100rel_enable = account.111.subscribe_register = account.111.subscribe_mwi = account.111.subscribe_mwi_expires = account.111.subscribe_mwi_to_vm = voice_mail.number.111 = %BWVOICE-PORTAL-NUMBER-111% account.111.display_mwi.enable = account.111.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 544 OF 1142
account.111.cid_source_privacy = account.111.cid_source_ppi = account.111.session_timer.enable = account.111.session_timer.expires = account.111.session_timer.refresher = account.111.enable_user_equal_phone = account.111.srtp_encryption = account.111.ptime = account.111.shared_line = %BWSHAREDLINE-BINARY-111% account.111.register_mac = account.111.register_line = account.111.reg_fail_retry_interval = account.111.reg_failed_retry_min_time = account.111.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.111.conf_type =
account.111.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-111%
account.111.sip_server_type = account.111.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.111.register_expires_overlap = account.111.subscribe_expires_overlap = account.111.auto_dial_enable = account.111.auto_dial_num = account.111.cp_source = account.111.transfer_refer_to_contact_header.enable = #V80 Add account.111.custom_ua = account.111.callpark_enable = account.111.check_cseq.enable = account.111.check_to_tag.enable = account.111.hold_use_inactive = account.111.line_seize.expires = account.111.update_ack_while_dialing = account.111.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.111.always_fwd.enable =
account.111.always_fwd.target =
account.111.always_fwd.off_code =
account.111.always_fwd.on_code =
account.111.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 545 OF 1142
account.111.busy_fwd.target = account.111.busy_fwd.off_code = account.111.busy_fwd.on_code = account.111.timeout_fwd.enable = account.111.timeout_fwd.target = account.111.timeout_fwd.timeout = account.111.timeout_fwd.off_code = account.111.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.111.dnd.enable =
account.111.dnd.on_code =
account.111.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.111.reg.enable =
handset.111.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.111.xsi.user =%BWLOGIN-ID-111% account.111.xsi.password =%XSIPASSWORD-111% account.111.xsi.host =%XSP_ADDRESS% account.111.xsi.server_type = account.111.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.111.ldap.enable =
handset.111.ldap.name_filter=
handset.111.ldap.number_filter=
handset.111.ldap.host=
handset.111.ldap.port=
handset.111.ldap.base=
handset.111.ldap.user=
handset.111.ldap.password=
handset.111.ldap.max_hits=
handset.111.ldap.name_attr=
handset.111.ldap.numb_attr=
handset.111.ldap.display_name=
handset.111.ldap.version=
handset.111.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 546 OF 1142
handset.111.ldap.ldap_sort= handset.111.ldap.tls_mode= handset.111.ldap.call_out_lookup= handset.111.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account112 Settings
##
##########################################################################
#############
account.112.enable=%BWLINE-BINARY-112% account.112.label=%BWEXTENSION-112% account.112.display_name=%BWCLID-112% account.112.auth_name=%BWAUTHUSER-112% account.112.user_name=%BWLINEPORT-112% account.112.password=%BWAUTHPASSWORD-112%
#W80B ADD account.112.sip_server.template = account.112.media_transmit.enable =
account.112.alarm.template = account.112.alarm.server = account.112.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.112.sip_server.1.failback_mode =
account.112.sip_server.1.failback_timeout =
account.112.sip_server.1.register_on_enable =
account.112.sip_server.1.failback_subscribe.enable =
account.112.sip_server.1.invite_retry_counts =
account.112.sip_server.1.only_signal_with_registered =
account.112.sip_server.2.failback_mode = account.112.sip_server.2.failback_timeout = account.112.sip_server.2.register_on_enable = account.112.sip_server.2.failback_subscribe.enable = account.112.sip_server.2.invite_retry_counts = account.112.sip_server.2.only_signal_with_registered =
account.112.naptr_build = account.112.fallback.redundancy_type = account.112.fallback.timeout =
account.112.dns_cache_type = account.112.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 547 OF 1142
account.112.anonymous_call = account.112.reject_anonymous_call = account.112.send_anonymous_code = account.112.anonymous_call_oncode = account.112.anonymous_call_offcode = account.112.send_anonymous_rejection_code = account.112.anonymous_reject_oncode = account.112.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.112.codec.g722.enable =
account.112.codec.g722.priority =
account.112.codec.g729.enable = account.112.codec.g729.priority =
account.112.codec.g726_16.enable = account.112.codec.g726_16.priority =
account.112.codec.g726_24.enable = account.112.codec.g726_24.priority =
account.112.codec.g726_32.enable = account.112.codec.g726_32.priority =
account.112.codec.g726_40.enable = account.112.codec.g726_40.priority =
account.112.codec.ilbc.enable = account.112.codec.ilbc.priority =
account.112.codec.pcmu.enable = account.112.codec.pcmu.priority =
account.112.codec.pcma.enable = account.112.codec.pcma.priority =
account.112.codec.opus.enable = account.112.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.112.nat.nat_traversal = account.112.nat.udp_update_enable = account.112.nat.udp_update_time = account.112.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 548 OF 1142
########################################################################## #############
account.112.blf.subscribe_period = account.112.dtmf.type = account.112.dtmf.dtmf_payload = account.112.dtmf.info_type = account.112.100rel_enable = account.112.subscribe_register = account.112.subscribe_mwi = account.112.subscribe_mwi_expires = account.112.subscribe_mwi_to_vm = voice_mail.number.112 = %BWVOICE-PORTAL-NUMBER-112% account.112.display_mwi.enable = account.112.cid_source = account.112.cid_source_privacy = account.112.cid_source_ppi = account.112.session_timer.enable = account.112.session_timer.expires = account.112.session_timer.refresher = account.112.enable_user_equal_phone = account.112.srtp_encryption = account.112.ptime = account.112.shared_line = %BWSHAREDLINE-BINARY-112% account.112.register_mac = account.112.register_line = account.112.reg_fail_retry_interval = account.112.reg_failed_retry_min_time = account.112.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.112.conf_type =
account.112.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-112%
account.112.sip_server_type = account.112.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.112.register_expires_overlap = account.112.subscribe_expires_overlap = account.112.auto_dial_enable = account.112.auto_dial_num = account.112.cp_source = account.112.transfer_refer_to_contact_header.enable = #V80 Add account.112.custom_ua = account.112.callpark_enable = account.112.check_cseq.enable = account.112.check_to_tag.enable = account.112.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 549 OF 1142
account.112.line_seize.expires = account.112.update_ack_while_dialing = account.112.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.112.always_fwd.enable =
account.112.always_fwd.target =
account.112.always_fwd.off_code =
account.112.always_fwd.on_code =
account.112.busy_fwd.enable =
account.112.busy_fwd.target =
account.112.busy_fwd.off_code =
account.112.busy_fwd.on_code =
account.112.timeout_fwd.enable =
account.112.timeout_fwd.target =
account.112.timeout_fwd.timeout =
account.112.timeout_fwd.off_code =
account.112.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.112.dnd.enable =
account.112.dnd.on_code =
account.112.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.112.reg.enable =
handset.112.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.112.xsi.user =%BWLOGIN-ID-112% account.112.xsi.password =%XSIPASSWORD-112% account.112.xsi.host =%XSP_ADDRESS% account.112.xsi.server_type = account.112.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 550 OF 1142
########################################################################## ############# handset.112.ldap.enable = handset.112.ldap.name_filter= handset.112.ldap.number_filter= handset.112.ldap.host= handset.112.ldap.port= handset.112.ldap.base= handset.112.ldap.user= handset.112.ldap.password= handset.112.ldap.max_hits= handset.112.ldap.name_attr= handset.112.ldap.numb_attr= handset.112.ldap.display_name= handset.112.ldap.version= handset.112.ldap.call_in_lookup= handset.112.ldap.ldap_sort= handset.112.ldap.tls_mode= handset.112.ldap.call_out_lookup= handset.112.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account113 Settings
##
##########################################################################
#############
account.113.enable=%BWLINE-BINARY-113% account.113.label=%BWEXTENSION-113% account.113.display_name=%BWCLID-113% account.113.auth_name=%BWAUTHUSER-113% account.113.user_name=%BWLINEPORT-113% account.113.password=%BWAUTHPASSWORD-113%
#W80B ADD account.113.sip_server.template = account.113.media_transmit.enable =
account.113.alarm.template = account.113.alarm.server = account.113.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.113.sip_server.1.failback_mode =
account.113.sip_server.1.failback_timeout =
account.113.sip_server.1.register_on_enable =
account.113.sip_server.1.failback_subscribe.enable =
account.113.sip_server.1.invite_retry_counts =
account.113.sip_server.1.only_signal_with_registered =
account.113.sip_server.2.failback_mode = account.113.sip_server.2.failback_timeout = account.113.sip_server.2.register_on_enable = account.113.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 551 OF 1142
account.113.sip_server.2.invite_retry_counts = account.113.sip_server.2.only_signal_with_registered =
account.113.naptr_build = account.113.fallback.redundancy_type = account.113.fallback.timeout =
account.113.dns_cache_type = account.113.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.113.anonymous_call =
account.113.reject_anonymous_call =
account.113.send_anonymous_code =
account.113.anonymous_call_oncode =
account.113.anonymous_call_offcode =
account.113.send_anonymous_rejection_code =
account.113.anonymous_reject_oncode =
account.113.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.113.codec.g722.enable =
account.113.codec.g722.priority =
account.113.codec.g729.enable = account.113.codec.g729.priority =
account.113.codec.g726_16.enable = account.113.codec.g726_16.priority =
account.113.codec.g726_24.enable = account.113.codec.g726_24.priority =
account.113.codec.g726_32.enable = account.113.codec.g726_32.priority =
account.113.codec.g726_40.enable = account.113.codec.g726_40.priority =
account.113.codec.ilbc.enable = account.113.codec.ilbc.priority =
account.113.codec.pcmu.enable = account.113.codec.pcmu.priority =
account.113.codec.pcma.enable = account.113.codec.pcma.priority =
account.113.codec.opus.enable = account.113.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 552 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.113.nat.nat_traversal = account.113.nat.udp_update_enable = account.113.nat.udp_update_time = account.113.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.113.blf.subscribe_period = account.113.dtmf.type = account.113.dtmf.dtmf_payload = account.113.dtmf.info_type = account.113.100rel_enable = account.113.subscribe_register = account.113.subscribe_mwi = account.113.subscribe_mwi_expires = account.113.subscribe_mwi_to_vm = voice_mail.number.113 = %BWVOICE-PORTAL-NUMBER-113% account.113.display_mwi.enable = account.113.cid_source = account.113.cid_source_privacy = account.113.cid_source_ppi = account.113.session_timer.enable = account.113.session_timer.expires = account.113.session_timer.refresher = account.113.enable_user_equal_phone = account.113.srtp_encryption = account.113.ptime = account.113.shared_line = %BWSHAREDLINE-BINARY-113% account.113.register_mac = account.113.register_line = account.113.reg_fail_retry_interval = account.113.reg_failed_retry_min_time = account.113.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.113.conf_type =
account.113.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-113%
account.113.sip_server_type = account.113.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 553 OF 1142
########################################################################## ############# ##DECT V81 Add
account.113.register_expires_overlap = account.113.subscribe_expires_overlap = account.113.auto_dial_enable = account.113.auto_dial_num = account.113.cp_source = account.113.transfer_refer_to_contact_header.enable = #V80 Add account.113.custom_ua = account.113.callpark_enable = account.113.check_cseq.enable = account.113.check_to_tag.enable = account.113.hold_use_inactive = account.113.line_seize.expires = account.113.update_ack_while_dialing = account.113.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.113.always_fwd.enable =
account.113.always_fwd.target =
account.113.always_fwd.off_code =
account.113.always_fwd.on_code =
account.113.busy_fwd.enable =
account.113.busy_fwd.target =
account.113.busy_fwd.off_code =
account.113.busy_fwd.on_code =
account.113.timeout_fwd.enable =
account.113.timeout_fwd.target =
account.113.timeout_fwd.timeout =
account.113.timeout_fwd.off_code =
account.113.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.113.dnd.enable =
account.113.dnd.on_code =
account.113.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.113.reg.enable =
handset.113.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 554 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.113.xsi.user =%BWLOGIN-ID-113% account.113.xsi.password =%XSIPASSWORD-113% account.113.xsi.host =%XSP_ADDRESS% account.113.xsi.server_type = account.113.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.113.ldap.enable =
handset.113.ldap.name_filter=
handset.113.ldap.number_filter=
handset.113.ldap.host=
handset.113.ldap.port=
handset.113.ldap.base=
handset.113.ldap.user=
handset.113.ldap.password=
handset.113.ldap.max_hits=
handset.113.ldap.name_attr=
handset.113.ldap.numb_attr=
handset.113.ldap.display_name=
handset.113.ldap.version=
handset.113.ldap.call_in_lookup=
handset.113.ldap.ldap_sort=
handset.113.ldap.tls_mode=
handset.113.ldap.call_out_lookup=
handset.113.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account114 Settings
##
##########################################################################
#############
account.114.enable=%BWLINE-BINARY-114% account.114.label=%BWEXTENSION-114% account.114.display_name=%BWCLID-114% account.114.auth_name=%BWAUTHUSER-114% account.114.user_name=%BWLINEPORT-114% account.114.password=%BWAUTHPASSWORD-114%
#W80B ADD account.114.sip_server.template = account.114.media_transmit.enable =
account.114.alarm.template = account.114.alarm.server = account.114.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 555 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.114.sip_server.1.failback_mode =
account.114.sip_server.1.failback_timeout =
account.114.sip_server.1.register_on_enable =
account.114.sip_server.1.failback_subscribe.enable =
account.114.sip_server.1.invite_retry_counts =
account.114.sip_server.1.only_signal_with_registered =
account.114.sip_server.2.failback_mode = account.114.sip_server.2.failback_timeout = account.114.sip_server.2.register_on_enable = account.114.sip_server.2.failback_subscribe.enable = account.114.sip_server.2.invite_retry_counts = account.114.sip_server.2.only_signal_with_registered =
account.114.naptr_build = account.114.fallback.redundancy_type = account.114.fallback.timeout =
account.114.dns_cache_type = account.114.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.114.anonymous_call =
account.114.reject_anonymous_call =
account.114.send_anonymous_code =
account.114.anonymous_call_oncode =
account.114.anonymous_call_offcode =
account.114.send_anonymous_rejection_code =
account.114.anonymous_reject_oncode =
account.114.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.114.codec.g722.enable =
account.114.codec.g722.priority =
account.114.codec.g729.enable = account.114.codec.g729.priority =
account.114.codec.g726_16.enable = account.114.codec.g726_16.priority =
account.114.codec.g726_24.enable = account.114.codec.g726_24.priority =
account.114.codec.g726_32.enable = account.114.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 556 OF 1142
account.114.codec.g726_40.enable = account.114.codec.g726_40.priority =
account.114.codec.ilbc.enable = account.114.codec.ilbc.priority =
account.114.codec.pcmu.enable = account.114.codec.pcmu.priority =
account.114.codec.pcma.enable = account.114.codec.pcma.priority =
account.114.codec.opus.enable = account.114.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.114.nat.nat_traversal = account.114.nat.udp_update_enable = account.114.nat.udp_update_time = account.114.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.114.blf.subscribe_period = account.114.dtmf.type = account.114.dtmf.dtmf_payload = account.114.dtmf.info_type = account.114.100rel_enable = account.114.subscribe_register = account.114.subscribe_mwi = account.114.subscribe_mwi_expires = account.114.subscribe_mwi_to_vm = voice_mail.number.114 = %BWVOICE-PORTAL-NUMBER-114% account.114.display_mwi.enable = account.114.cid_source = account.114.cid_source_privacy = account.114.cid_source_ppi = account.114.session_timer.enable = account.114.session_timer.expires = account.114.session_timer.refresher = account.114.enable_user_equal_phone = account.114.srtp_encryption = account.114.ptime = account.114.shared_line = %BWSHAREDLINE-BINARY-114% account.114.register_mac = account.114.register_line = account.114.reg_fail_retry_interval = account.114.reg_failed_retry_min_time = account.114.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 557 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.114.conf_type =
account.114.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-114%
account.114.sip_server_type = account.114.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.114.register_expires_overlap = account.114.subscribe_expires_overlap = account.114.auto_dial_enable = account.114.auto_dial_num = account.114.cp_source = account.114.transfer_refer_to_contact_header.enable = #V80 Add account.114.custom_ua = account.114.callpark_enable = account.114.check_cseq.enable = account.114.check_to_tag.enable = account.114.hold_use_inactive = account.114.line_seize.expires = account.114.update_ack_while_dialing = account.114.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.114.always_fwd.enable =
account.114.always_fwd.target =
account.114.always_fwd.off_code =
account.114.always_fwd.on_code =
account.114.busy_fwd.enable =
account.114.busy_fwd.target =
account.114.busy_fwd.off_code =
account.114.busy_fwd.on_code =
account.114.timeout_fwd.enable =
account.114.timeout_fwd.target =
account.114.timeout_fwd.timeout =
account.114.timeout_fwd.off_code =
account.114.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 558 OF 1142
account.114.dnd.enable = account.114.dnd.on_code = account.114.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.114.reg.enable =
handset.114.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.114.xsi.user =%BWLOGIN-ID-114% account.114.xsi.password =%XSIPASSWORD-114% account.114.xsi.host =%XSP_ADDRESS% account.114.xsi.server_type = account.114.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.114.ldap.enable =
handset.114.ldap.name_filter=
handset.114.ldap.number_filter=
handset.114.ldap.host=
handset.114.ldap.port=
handset.114.ldap.base=
handset.114.ldap.user=
handset.114.ldap.password=
handset.114.ldap.max_hits=
handset.114.ldap.name_attr=
handset.114.ldap.numb_attr=
handset.114.ldap.display_name=
handset.114.ldap.version=
handset.114.ldap.call_in_lookup=
handset.114.ldap.ldap_sort=
handset.114.ldap.tls_mode=
handset.114.ldap.call_out_lookup=
handset.114.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account115 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 559 OF 1142
account.115.enable=%BWLINE-BINARY-115% account.115.label=%BWEXTENSION-115% account.115.display_name=%BWCLID-115% account.115.auth_name=%BWAUTHUSER-115% account.115.user_name=%BWLINEPORT-115% account.115.password=%BWAUTHPASSWORD-115%
#W80B ADD account.115.sip_server.template = account.115.media_transmit.enable =
account.115.alarm.template = account.115.alarm.server = account.115.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.115.sip_server.1.failback_mode =
account.115.sip_server.1.failback_timeout =
account.115.sip_server.1.register_on_enable =
account.115.sip_server.1.failback_subscribe.enable =
account.115.sip_server.1.invite_retry_counts =
account.115.sip_server.1.only_signal_with_registered =
account.115.sip_server.2.failback_mode = account.115.sip_server.2.failback_timeout = account.115.sip_server.2.register_on_enable = account.115.sip_server.2.failback_subscribe.enable = account.115.sip_server.2.invite_retry_counts = account.115.sip_server.2.only_signal_with_registered =
account.115.naptr_build = account.115.fallback.redundancy_type = account.115.fallback.timeout =
account.115.dns_cache_type = account.115.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.115.anonymous_call =
account.115.reject_anonymous_call =
account.115.send_anonymous_code =
account.115.anonymous_call_oncode =
account.115.anonymous_call_offcode =
account.115.send_anonymous_rejection_code =
account.115.anonymous_reject_oncode =
account.115.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 560 OF 1142
########################################################################## ############# account.115.codec.g722.enable = account.115.codec.g722.priority =
account.115.codec.g729.enable = account.115.codec.g729.priority =
account.115.codec.g726_16.enable = account.115.codec.g726_16.priority =
account.115.codec.g726_24.enable = account.115.codec.g726_24.priority =
account.115.codec.g726_32.enable = account.115.codec.g726_32.priority =
account.115.codec.g726_40.enable = account.115.codec.g726_40.priority =
account.115.codec.ilbc.enable = account.115.codec.ilbc.priority =
account.115.codec.pcmu.enable = account.115.codec.pcmu.priority =
account.115.codec.pcma.enable = account.115.codec.pcma.priority =
account.115.codec.opus.enable = account.115.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.115.nat.nat_traversal = account.115.nat.udp_update_enable = account.115.nat.udp_update_time = account.115.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.115.blf.subscribe_period = account.115.dtmf.type = account.115.dtmf.dtmf_payload = account.115.dtmf.info_type = account.115.100rel_enable = account.115.subscribe_register = account.115.subscribe_mwi = account.115.subscribe_mwi_expires = account.115.subscribe_mwi_to_vm = voice_mail.number.115 = %BWVOICE-PORTAL-NUMBER-115% account.115.display_mwi.enable = account.115.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 561 OF 1142
account.115.cid_source_privacy = account.115.cid_source_ppi = account.115.session_timer.enable = account.115.session_timer.expires = account.115.session_timer.refresher = account.115.enable_user_equal_phone = account.115.srtp_encryption = account.115.ptime = account.115.shared_line = %BWSHAREDLINE-BINARY-115% account.115.register_mac = account.115.register_line = account.115.reg_fail_retry_interval = account.115.reg_failed_retry_min_time = account.115.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.115.conf_type =
account.115.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-115%
account.115.sip_server_type = account.115.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.115.register_expires_overlap = account.115.subscribe_expires_overlap = account.115.auto_dial_enable = account.115.auto_dial_num = account.115.cp_source = account.115.transfer_refer_to_contact_header.enable = #V80 Add account.115.custom_ua = account.115.callpark_enable = account.115.check_cseq.enable = account.115.check_to_tag.enable = account.115.hold_use_inactive = account.115.line_seize.expires = account.115.update_ack_while_dialing = account.115.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.115.always_fwd.enable =
account.115.always_fwd.target =
account.115.always_fwd.off_code =
account.115.always_fwd.on_code =
account.115.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 562 OF 1142
account.115.busy_fwd.target = account.115.busy_fwd.off_code = account.115.busy_fwd.on_code = account.115.timeout_fwd.enable = account.115.timeout_fwd.target = account.115.timeout_fwd.timeout = account.115.timeout_fwd.off_code = account.115.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.115.dnd.enable =
account.115.dnd.on_code =
account.115.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.115.reg.enable =
handset.115.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.115.xsi.user =%BWLOGIN-ID-115% account.115.xsi.password =%XSIPASSWORD-115% account.115.xsi.host =%XSP_ADDRESS% account.115.xsi.server_type = account.115.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.115.ldap.enable =
handset.115.ldap.name_filter=
handset.115.ldap.number_filter=
handset.115.ldap.host=
handset.115.ldap.port=
handset.115.ldap.base=
handset.115.ldap.user=
handset.115.ldap.password=
handset.115.ldap.max_hits=
handset.115.ldap.name_attr=
handset.115.ldap.numb_attr=
handset.115.ldap.display_name=
handset.115.ldap.version=
handset.115.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 563 OF 1142
handset.115.ldap.ldap_sort= handset.115.ldap.tls_mode= handset.115.ldap.call_out_lookup= handset.115.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account116 Settings
##
##########################################################################
#############
account.116.enable=%BWLINE-BINARY-116% account.116.label=%BWEXTENSION-116% account.116.display_name=%BWCLID-116% account.116.auth_name=%BWAUTHUSER-116% account.116.user_name=%BWLINEPORT-116% account.116.password=%BWAUTHPASSWORD-116%
#W80B ADD account.116.sip_server.template = account.116.media_transmit.enable =
account.116.alarm.template = account.116.alarm.server = account.116.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.116.sip_server.1.failback_mode =
account.116.sip_server.1.failback_timeout =
account.116.sip_server.1.register_on_enable =
account.116.sip_server.1.failback_subscribe.enable =
account.116.sip_server.1.invite_retry_counts =
account.116.sip_server.1.only_signal_with_registered =
account.116.sip_server.2.failback_mode = account.116.sip_server.2.failback_timeout = account.116.sip_server.2.register_on_enable = account.116.sip_server.2.failback_subscribe.enable = account.116.sip_server.2.invite_retry_counts = account.116.sip_server.2.only_signal_with_registered =
account.116.naptr_build = account.116.fallback.redundancy_type = account.116.fallback.timeout =
account.116.dns_cache_type = account.116.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 564 OF 1142
account.116.anonymous_call = account.116.reject_anonymous_call = account.116.send_anonymous_code = account.116.anonymous_call_oncode = account.116.anonymous_call_offcode = account.116.send_anonymous_rejection_code = account.116.anonymous_reject_oncode = account.116.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.116.codec.g722.enable =
account.116.codec.g722.priority =
account.116.codec.g729.enable = account.116.codec.g729.priority =
account.116.codec.g726_16.enable = account.116.codec.g726_16.priority =
account.116.codec.g726_24.enable = account.116.codec.g726_24.priority =
account.116.codec.g726_32.enable = account.116.codec.g726_32.priority =
account.116.codec.g726_40.enable = account.116.codec.g726_40.priority =
account.116.codec.ilbc.enable = account.116.codec.ilbc.priority =
account.116.codec.pcmu.enable = account.116.codec.pcmu.priority =
account.116.codec.pcma.enable = account.116.codec.pcma.priority =
account.116.codec.opus.enable = account.116.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.116.nat.nat_traversal = account.116.nat.udp_update_enable = account.116.nat.udp_update_time = account.116.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 565 OF 1142
########################################################################## #############
account.116.blf.subscribe_period = account.116.dtmf.type = account.116.dtmf.dtmf_payload = account.116.dtmf.info_type = account.116.100rel_enable = account.116.subscribe_register = account.116.subscribe_mwi = account.116.subscribe_mwi_expires = account.116.subscribe_mwi_to_vm = voice_mail.number.116 = %BWVOICE-PORTAL-NUMBER-116% account.116.display_mwi.enable = account.116.cid_source = account.116.cid_source_privacy = account.116.cid_source_ppi = account.116.session_timer.enable = account.116.session_timer.expires = account.116.session_timer.refresher = account.116.enable_user_equal_phone = account.116.srtp_encryption = account.116.ptime = account.116.shared_line = %BWSHAREDLINE-BINARY-116% account.116.register_mac = account.116.register_line = account.116.reg_fail_retry_interval = account.116.reg_failed_retry_min_time = account.116.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.116.conf_type =
account.116.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-116%
account.116.sip_server_type = account.116.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.116.register_expires_overlap = account.116.subscribe_expires_overlap = account.116.auto_dial_enable = account.116.auto_dial_num = account.116.cp_source = account.116.transfer_refer_to_contact_header.enable = #V80 Add account.116.custom_ua = account.116.callpark_enable = account.116.check_cseq.enable = account.116.check_to_tag.enable = account.116.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 566 OF 1142
account.116.line_seize.expires = account.116.update_ack_while_dialing = account.116.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.116.always_fwd.enable =
account.116.always_fwd.target =
account.116.always_fwd.off_code =
account.116.always_fwd.on_code =
account.116.busy_fwd.enable =
account.116.busy_fwd.target =
account.116.busy_fwd.off_code =
account.116.busy_fwd.on_code =
account.116.timeout_fwd.enable =
account.116.timeout_fwd.target =
account.116.timeout_fwd.timeout =
account.116.timeout_fwd.off_code =
account.116.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.116.dnd.enable =
account.116.dnd.on_code =
account.116.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.116.reg.enable =
handset.116.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.116.xsi.user =%BWLOGIN-ID-116% account.116.xsi.password =%XSIPASSWORD-116% account.116.xsi.host =%XSP_ADDRESS% account.116.xsi.server_type = account.116.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 567 OF 1142
########################################################################## ############# handset.116.ldap.enable = handset.116.ldap.name_filter= handset.116.ldap.number_filter= handset.116.ldap.host= handset.116.ldap.port= handset.116.ldap.base= handset.116.ldap.user= handset.116.ldap.password= handset.116.ldap.max_hits= handset.116.ldap.name_attr= handset.116.ldap.numb_attr= handset.116.ldap.display_name= handset.116.ldap.version= handset.116.ldap.call_in_lookup= handset.116.ldap.ldap_sort= handset.116.ldap.tls_mode= handset.116.ldap.call_out_lookup= handset.116.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account117 Settings
##
##########################################################################
#############
account.117.enable=%BWLINE-BINARY-117% account.117.label=%BWEXTENSION-117% account.117.display_name=%BWCLID-117% account.117.auth_name=%BWAUTHUSER-117% account.117.user_name=%BWLINEPORT-117% account.117.password=%BWAUTHPASSWORD-117%
#W80B ADD account.117.sip_server.template = account.117.media_transmit.enable =
account.117.alarm.template = account.117.alarm.server = account.117.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.117.sip_server.1.failback_mode =
account.117.sip_server.1.failback_timeout =
account.117.sip_server.1.register_on_enable =
account.117.sip_server.1.failback_subscribe.enable =
account.117.sip_server.1.invite_retry_counts =
account.117.sip_server.1.only_signal_with_registered =
account.117.sip_server.2.failback_mode = account.117.sip_server.2.failback_timeout = account.117.sip_server.2.register_on_enable = account.117.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 568 OF 1142
account.117.sip_server.2.invite_retry_counts = account.117.sip_server.2.only_signal_with_registered =
account.117.naptr_build = account.117.fallback.redundancy_type = account.117.fallback.timeout =
account.117.dns_cache_type = account.117.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.117.anonymous_call =
account.117.reject_anonymous_call =
account.117.send_anonymous_code =
account.117.anonymous_call_oncode =
account.117.anonymous_call_offcode =
account.117.send_anonymous_rejection_code =
account.117.anonymous_reject_oncode =
account.117.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.117.codec.g722.enable =
account.117.codec.g722.priority =
account.117.codec.g729.enable = account.117.codec.g729.priority =
account.117.codec.g726_16.enable = account.117.codec.g726_16.priority =
account.117.codec.g726_24.enable = account.117.codec.g726_24.priority =
account.117.codec.g726_32.enable = account.117.codec.g726_32.priority =
account.117.codec.g726_40.enable = account.117.codec.g726_40.priority =
account.117.codec.ilbc.enable = account.117.codec.ilbc.priority =
account.117.codec.pcmu.enable = account.117.codec.pcmu.priority =
account.117.codec.pcma.enable = account.117.codec.pcma.priority =
account.117.codec.opus.enable = account.117.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 569 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.117.nat.nat_traversal = account.117.nat.udp_update_enable = account.117.nat.udp_update_time = account.117.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.117.blf.subscribe_period = account.117.dtmf.type = account.117.dtmf.dtmf_payload = account.117.dtmf.info_type = account.117.100rel_enable = account.117.subscribe_register = account.117.subscribe_mwi = account.117.subscribe_mwi_expires = account.117.subscribe_mwi_to_vm = voice_mail.number.117 = %BWVOICE-PORTAL-NUMBER-117% account.117.display_mwi.enable = account.117.cid_source = account.117.cid_source_privacy = account.117.cid_source_ppi = account.117.session_timer.enable = account.117.session_timer.expires = account.117.session_timer.refresher = account.117.enable_user_equal_phone = account.117.srtp_encryption = account.117.ptime = account.117.shared_line = %BWSHAREDLINE-BINARY-117% account.117.register_mac = account.117.register_line = account.117.reg_fail_retry_interval = account.117.reg_failed_retry_min_time = account.117.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.117.conf_type =
account.117.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-117%
account.117.sip_server_type = account.117.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 570 OF 1142
########################################################################## ############# ##DECT V81 Add
account.117.register_expires_overlap = account.117.subscribe_expires_overlap = account.117.auto_dial_enable = account.117.auto_dial_num = account.117.cp_source = account.117.transfer_refer_to_contact_header.enable = #V80 Add account.117.custom_ua = account.117.callpark_enable = account.117.check_cseq.enable = account.117.check_to_tag.enable = account.117.hold_use_inactive = account.117.line_seize.expires = account.117.update_ack_while_dialing = account.117.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.117.always_fwd.enable =
account.117.always_fwd.target =
account.117.always_fwd.off_code =
account.117.always_fwd.on_code =
account.117.busy_fwd.enable =
account.117.busy_fwd.target =
account.117.busy_fwd.off_code =
account.117.busy_fwd.on_code =
account.117.timeout_fwd.enable =
account.117.timeout_fwd.target =
account.117.timeout_fwd.timeout =
account.117.timeout_fwd.off_code =
account.117.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.117.dnd.enable =
account.117.dnd.on_code =
account.117.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.117.reg.enable =
handset.117.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 571 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.117.xsi.user =%BWLOGIN-ID-117% account.117.xsi.password =%XSIPASSWORD-117% account.117.xsi.host =%XSP_ADDRESS% account.117.xsi.server_type = account.117.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.117.ldap.enable =
handset.117.ldap.name_filter=
handset.117.ldap.number_filter=
handset.117.ldap.host=
handset.117.ldap.port=
handset.117.ldap.base=
handset.117.ldap.user=
handset.117.ldap.password=
handset.117.ldap.max_hits=
handset.117.ldap.name_attr=
handset.117.ldap.numb_attr=
handset.117.ldap.display_name=
handset.117.ldap.version=
handset.117.ldap.call_in_lookup=
handset.117.ldap.ldap_sort=
handset.117.ldap.tls_mode=
handset.117.ldap.call_out_lookup=
handset.117.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account118 Settings
##
##########################################################################
#############
account.118.enable=%BWLINE-BINARY-118% account.118.label=%BWEXTENSION-118% account.118.display_name=%BWCLID-118% account.118.auth_name=%BWAUTHUSER-118% account.118.user_name=%BWLINEPORT-118% account.118.password=%BWAUTHPASSWORD-118%
#W80B ADD account.118.sip_server.template = account.118.media_transmit.enable =
account.118.alarm.template = account.118.alarm.server = account.118.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 572 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.118.sip_server.1.failback_mode =
account.118.sip_server.1.failback_timeout =
account.118.sip_server.1.register_on_enable =
account.118.sip_server.1.failback_subscribe.enable =
account.118.sip_server.1.invite_retry_counts =
account.118.sip_server.1.only_signal_with_registered =
account.118.sip_server.2.failback_mode = account.118.sip_server.2.failback_timeout = account.118.sip_server.2.register_on_enable = account.118.sip_server.2.failback_subscribe.enable = account.118.sip_server.2.invite_retry_counts = account.118.sip_server.2.only_signal_with_registered =
account.118.naptr_build = account.118.fallback.redundancy_type = account.118.fallback.timeout =
account.118.dns_cache_type = account.118.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.118.anonymous_call =
account.118.reject_anonymous_call =
account.118.send_anonymous_code =
account.118.anonymous_call_oncode =
account.118.anonymous_call_offcode =
account.118.send_anonymous_rejection_code =
account.118.anonymous_reject_oncode =
account.118.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.118.codec.g722.enable =
account.118.codec.g722.priority =
account.118.codec.g729.enable = account.118.codec.g729.priority =
account.118.codec.g726_16.enable = account.118.codec.g726_16.priority =
account.118.codec.g726_24.enable = account.118.codec.g726_24.priority =
account.118.codec.g726_32.enable = account.118.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 573 OF 1142
account.118.codec.g726_40.enable = account.118.codec.g726_40.priority =
account.118.codec.ilbc.enable = account.118.codec.ilbc.priority =
account.118.codec.pcmu.enable = account.118.codec.pcmu.priority =
account.118.codec.pcma.enable = account.118.codec.pcma.priority =
account.118.codec.opus.enable = account.118.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.118.nat.nat_traversal = account.118.nat.udp_update_enable = account.118.nat.udp_update_time = account.118.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.118.blf.subscribe_period = account.118.dtmf.type = account.118.dtmf.dtmf_payload = account.118.dtmf.info_type = account.118.100rel_enable = account.118.subscribe_register = account.118.subscribe_mwi = account.118.subscribe_mwi_expires = account.118.subscribe_mwi_to_vm = voice_mail.number.118 = %BWVOICE-PORTAL-NUMBER-118% account.118.display_mwi.enable = account.118.cid_source = account.118.cid_source_privacy = account.118.cid_source_ppi = account.118.session_timer.enable = account.118.session_timer.expires = account.118.session_timer.refresher = account.118.enable_user_equal_phone = account.118.srtp_encryption = account.118.ptime = account.118.shared_line = %BWSHAREDLINE-BINARY-118% account.118.register_mac = account.118.register_line = account.118.reg_fail_retry_interval = account.118.reg_failed_retry_min_time = account.118.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 574 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.118.conf_type =
account.118.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-118%
account.118.sip_server_type = account.118.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.118.register_expires_overlap = account.118.subscribe_expires_overlap = account.118.auto_dial_enable = account.118.auto_dial_num = account.118.cp_source = account.118.transfer_refer_to_contact_header.enable = #V80 Add account.118.custom_ua = account.118.callpark_enable = account.118.check_cseq.enable = account.118.check_to_tag.enable = account.118.hold_use_inactive = account.118.line_seize.expires = account.118.update_ack_while_dialing = account.118.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.118.always_fwd.enable =
account.118.always_fwd.target =
account.118.always_fwd.off_code =
account.118.always_fwd.on_code =
account.118.busy_fwd.enable =
account.118.busy_fwd.target =
account.118.busy_fwd.off_code =
account.118.busy_fwd.on_code =
account.118.timeout_fwd.enable =
account.118.timeout_fwd.target =
account.118.timeout_fwd.timeout =
account.118.timeout_fwd.off_code =
account.118.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 575 OF 1142
account.118.dnd.enable = account.118.dnd.on_code = account.118.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.118.reg.enable =
handset.118.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.118.xsi.user =%BWLOGIN-ID-118% account.118.xsi.password =%XSIPASSWORD-118% account.118.xsi.host =%XSP_ADDRESS% account.118.xsi.server_type = account.118.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.118.ldap.enable =
handset.118.ldap.name_filter=
handset.118.ldap.number_filter=
handset.118.ldap.host=
handset.118.ldap.port=
handset.118.ldap.base=
handset.118.ldap.user=
handset.118.ldap.password=
handset.118.ldap.max_hits=
handset.118.ldap.name_attr=
handset.118.ldap.numb_attr=
handset.118.ldap.display_name=
handset.118.ldap.version=
handset.118.ldap.call_in_lookup=
handset.118.ldap.ldap_sort=
handset.118.ldap.tls_mode=
handset.118.ldap.call_out_lookup=
handset.118.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account119 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 576 OF 1142
account.119.enable=%BWLINE-BINARY-119% account.119.label=%BWEXTENSION-119% account.119.display_name=%BWCLID-119% account.119.auth_name=%BWAUTHUSER-119% account.119.user_name=%BWLINEPORT-119% account.119.password=%BWAUTHPASSWORD-119%
#W80B ADD account.119.sip_server.template = account.119.media_transmit.enable =
account.119.alarm.template = account.119.alarm.server = account.119.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.119.sip_server.1.failback_mode =
account.119.sip_server.1.failback_timeout =
account.119.sip_server.1.register_on_enable =
account.119.sip_server.1.failback_subscribe.enable =
account.119.sip_server.1.invite_retry_counts =
account.119.sip_server.1.only_signal_with_registered =
account.119.sip_server.2.failback_mode = account.119.sip_server.2.failback_timeout = account.119.sip_server.2.register_on_enable = account.119.sip_server.2.failback_subscribe.enable = account.119.sip_server.2.invite_retry_counts = account.119.sip_server.2.only_signal_with_registered =
account.119.naptr_build = account.119.fallback.redundancy_type = account.119.fallback.timeout =
account.119.dns_cache_type = account.119.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.119.anonymous_call =
account.119.reject_anonymous_call =
account.119.send_anonymous_code =
account.119.anonymous_call_oncode =
account.119.anonymous_call_offcode =
account.119.send_anonymous_rejection_code =
account.119.anonymous_reject_oncode =
account.119.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 577 OF 1142
########################################################################## ############# account.119.codec.g722.enable = account.119.codec.g722.priority =
account.119.codec.g729.enable = account.119.codec.g729.priority =
account.119.codec.g726_16.enable = account.119.codec.g726_16.priority =
account.119.codec.g726_24.enable = account.119.codec.g726_24.priority =
account.119.codec.g726_32.enable = account.119.codec.g726_32.priority =
account.119.codec.g726_40.enable = account.119.codec.g726_40.priority =
account.119.codec.ilbc.enable = account.119.codec.ilbc.priority =
account.119.codec.pcmu.enable = account.119.codec.pcmu.priority =
account.119.codec.pcma.enable = account.119.codec.pcma.priority =
account.119.codec.opus.enable = account.119.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.119.nat.nat_traversal = account.119.nat.udp_update_enable = account.119.nat.udp_update_time = account.119.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.119.blf.subscribe_period = account.119.dtmf.type = account.119.dtmf.dtmf_payload = account.119.dtmf.info_type = account.119.100rel_enable = account.119.subscribe_register = account.119.subscribe_mwi = account.119.subscribe_mwi_expires = account.119.subscribe_mwi_to_vm = voice_mail.number.119 = %BWVOICE-PORTAL-NUMBER-119% account.119.display_mwi.enable = account.119.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 578 OF 1142
account.119.cid_source_privacy = account.119.cid_source_ppi = account.119.session_timer.enable = account.119.session_timer.expires = account.119.session_timer.refresher = account.119.enable_user_equal_phone = account.119.srtp_encryption = account.119.ptime = account.119.shared_line = %BWSHAREDLINE-BINARY-119% account.119.register_mac = account.119.register_line = account.119.reg_fail_retry_interval = account.119.reg_failed_retry_min_time = account.119.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.119.conf_type =
account.119.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-119%
account.119.sip_server_type = account.119.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.119.register_expires_overlap = account.119.subscribe_expires_overlap = account.119.auto_dial_enable = account.119.auto_dial_num = account.119.cp_source = account.119.transfer_refer_to_contact_header.enable = #V80 Add account.119.custom_ua = account.119.callpark_enable = account.119.check_cseq.enable = account.119.check_to_tag.enable = account.119.hold_use_inactive = account.119.line_seize.expires = account.119.update_ack_while_dialing = account.119.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.119.always_fwd.enable =
account.119.always_fwd.target =
account.119.always_fwd.off_code =
account.119.always_fwd.on_code =
account.119.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 579 OF 1142
account.119.busy_fwd.target = account.119.busy_fwd.off_code = account.119.busy_fwd.on_code = account.119.timeout_fwd.enable = account.119.timeout_fwd.target = account.119.timeout_fwd.timeout = account.119.timeout_fwd.off_code = account.119.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.119.dnd.enable =
account.119.dnd.on_code =
account.119.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.119.reg.enable =
handset.119.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.119.xsi.user =%BWLOGIN-ID-119% account.119.xsi.password =%XSIPASSWORD-119% account.119.xsi.host =%XSP_ADDRESS% account.119.xsi.server_type = account.119.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.119.ldap.enable =
handset.119.ldap.name_filter=
handset.119.ldap.number_filter=
handset.119.ldap.host=
handset.119.ldap.port=
handset.119.ldap.base=
handset.119.ldap.user=
handset.119.ldap.password=
handset.119.ldap.max_hits=
handset.119.ldap.name_attr=
handset.119.ldap.numb_attr=
handset.119.ldap.display_name=
handset.119.ldap.version=
handset.119.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 580 OF 1142
handset.119.ldap.ldap_sort= handset.119.ldap.tls_mode= handset.119.ldap.call_out_lookup= handset.119.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account120 Settings
##
##########################################################################
#############
account.120.enable=%BWLINE-BINARY-120% account.120.label=%BWEXTENSION-120% account.120.display_name=%BWCLID-120% account.120.auth_name=%BWAUTHUSER-120% account.120.user_name=%BWLINEPORT-120% account.120.password=%BWAUTHPASSWORD-120%
#W80B ADD account.120.sip_server.template = account.120.media_transmit.enable =
account.120.alarm.template = account.120.alarm.server = account.120.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.120.sip_server.1.failback_mode =
account.120.sip_server.1.failback_timeout =
account.120.sip_server.1.register_on_enable =
account.120.sip_server.1.failback_subscribe.enable =
account.120.sip_server.1.invite_retry_counts =
account.120.sip_server.1.only_signal_with_registered =
account.120.sip_server.2.failback_mode = account.120.sip_server.2.failback_timeout = account.120.sip_server.2.register_on_enable = account.120.sip_server.2.failback_subscribe.enable = account.120.sip_server.2.invite_retry_counts = account.120.sip_server.2.only_signal_with_registered =
account.120.naptr_build = account.120.fallback.redundancy_type = account.120.fallback.timeout =
account.120.dns_cache_type = account.120.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 581 OF 1142
account.120.anonymous_call = account.120.reject_anonymous_call = account.120.send_anonymous_code = account.120.anonymous_call_oncode = account.120.anonymous_call_offcode = account.120.send_anonymous_rejection_code = account.120.anonymous_reject_oncode = account.120.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.120.codec.g722.enable =
account.120.codec.g722.priority =
account.120.codec.g729.enable = account.120.codec.g729.priority =
account.120.codec.g726_16.enable = account.120.codec.g726_16.priority =
account.120.codec.g726_24.enable = account.120.codec.g726_24.priority =
account.120.codec.g726_32.enable = account.120.codec.g726_32.priority =
account.120.codec.g726_40.enable = account.120.codec.g726_40.priority =
account.120.codec.ilbc.enable = account.120.codec.ilbc.priority =
account.120.codec.pcmu.enable = account.120.codec.pcmu.priority =
account.120.codec.pcma.enable = account.120.codec.pcma.priority =
account.120.codec.opus.enable = account.120.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.120.nat.nat_traversal = account.120.nat.udp_update_enable = account.120.nat.udp_update_time = account.120.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 582 OF 1142
########################################################################## #############
account.120.blf.subscribe_period = account.120.dtmf.type = account.120.dtmf.dtmf_payload = account.120.dtmf.info_type = account.120.100rel_enable = account.120.subscribe_register = account.120.subscribe_mwi = account.120.subscribe_mwi_expires = account.120.subscribe_mwi_to_vm = voice_mail.number.120 = %BWVOICE-PORTAL-NUMBER-120% account.120.display_mwi.enable = account.120.cid_source = account.120.cid_source_privacy = account.120.cid_source_ppi = account.120.session_timer.enable = account.120.session_timer.expires = account.120.session_timer.refresher = account.120.enable_user_equal_phone = account.120.srtp_encryption = account.120.ptime = account.120.shared_line = %BWSHAREDLINE-BINARY-120% account.120.register_mac = account.120.register_line = account.120.reg_fail_retry_interval = account.120.reg_failed_retry_min_time = account.120.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.120.conf_type =
account.120.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-120%
account.120.sip_server_type = account.120.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.120.register_expires_overlap = account.120.subscribe_expires_overlap = account.120.auto_dial_enable = account.120.auto_dial_num = account.120.cp_source = account.120.transfer_refer_to_contact_header.enable = #V80 Add account.120.custom_ua = account.120.callpark_enable = account.120.check_cseq.enable = account.120.check_to_tag.enable = account.120.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 583 OF 1142
account.120.line_seize.expires = account.120.update_ack_while_dialing = account.120.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.120.always_fwd.enable =
account.120.always_fwd.target =
account.120.always_fwd.off_code =
account.120.always_fwd.on_code =
account.120.busy_fwd.enable =
account.120.busy_fwd.target =
account.120.busy_fwd.off_code =
account.120.busy_fwd.on_code =
account.120.timeout_fwd.enable =
account.120.timeout_fwd.target =
account.120.timeout_fwd.timeout =
account.120.timeout_fwd.off_code =
account.120.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.120.dnd.enable =
account.120.dnd.on_code =
account.120.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.120.reg.enable =
handset.120.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.120.xsi.user =%BWLOGIN-ID-120% account.120.xsi.password =%XSIPASSWORD-120% account.120.xsi.host =%XSP_ADDRESS% account.120.xsi.server_type = account.120.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 584 OF 1142
########################################################################## ############# handset.120.ldap.enable = handset.120.ldap.name_filter= handset.120.ldap.number_filter= handset.120.ldap.host= handset.120.ldap.port= handset.120.ldap.base= handset.120.ldap.user= handset.120.ldap.password= handset.120.ldap.max_hits= handset.120.ldap.name_attr= handset.120.ldap.numb_attr= handset.120.ldap.display_name= handset.120.ldap.version= handset.120.ldap.call_in_lookup= handset.120.ldap.ldap_sort= handset.120.ldap.tls_mode= handset.120.ldap.call_out_lookup= handset.120.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account121 Settings
##
##########################################################################
#############
account.121.enable=%BWLINE-BINARY-121% account.121.label=%BWEXTENSION-121% account.121.display_name=%BWCLID-121% account.121.auth_name=%BWAUTHUSER-121% account.121.user_name=%BWLINEPORT-121% account.121.password=%BWAUTHPASSWORD-121%
#W80B ADD account.121.sip_server.template = account.121.media_transmit.enable =
account.121.alarm.template = account.121.alarm.server = account.121.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.121.sip_server.1.failback_mode =
account.121.sip_server.1.failback_timeout =
account.121.sip_server.1.register_on_enable =
account.121.sip_server.1.failback_subscribe.enable =
account.121.sip_server.1.invite_retry_counts =
account.121.sip_server.1.only_signal_with_registered =
account.121.sip_server.2.failback_mode = account.121.sip_server.2.failback_timeout = account.121.sip_server.2.register_on_enable = account.121.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 585 OF 1142
account.121.sip_server.2.invite_retry_counts = account.121.sip_server.2.only_signal_with_registered =
account.121.naptr_build = account.121.fallback.redundancy_type = account.121.fallback.timeout =
account.121.dns_cache_type = account.121.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.121.anonymous_call =
account.121.reject_anonymous_call =
account.121.send_anonymous_code =
account.121.anonymous_call_oncode =
account.121.anonymous_call_offcode =
account.121.send_anonymous_rejection_code =
account.121.anonymous_reject_oncode =
account.121.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.121.codec.g722.enable =
account.121.codec.g722.priority =
account.121.codec.g729.enable = account.121.codec.g729.priority =
account.121.codec.g726_16.enable = account.121.codec.g726_16.priority =
account.121.codec.g726_24.enable = account.121.codec.g726_24.priority =
account.121.codec.g726_32.enable = account.121.codec.g726_32.priority =
account.121.codec.g726_40.enable = account.121.codec.g726_40.priority =
account.121.codec.ilbc.enable = account.121.codec.ilbc.priority =
account.121.codec.pcmu.enable = account.121.codec.pcmu.priority =
account.121.codec.pcma.enable = account.121.codec.pcma.priority =
account.121.codec.opus.enable = account.121.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 586 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.121.nat.nat_traversal = account.121.nat.udp_update_enable = account.121.nat.udp_update_time = account.121.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.121.blf.subscribe_period = account.121.dtmf.type = account.121.dtmf.dtmf_payload = account.121.dtmf.info_type = account.121.100rel_enable = account.121.subscribe_register = account.121.subscribe_mwi = account.121.subscribe_mwi_expires = account.121.subscribe_mwi_to_vm = voice_mail.number.121 = %BWVOICE-PORTAL-NUMBER-121% account.121.display_mwi.enable = account.121.cid_source = account.121.cid_source_privacy = account.121.cid_source_ppi = account.121.session_timer.enable = account.121.session_timer.expires = account.121.session_timer.refresher = account.121.enable_user_equal_phone = account.121.srtp_encryption = account.121.ptime = account.121.shared_line = %BWSHAREDLINE-BINARY-121% account.121.register_mac = account.121.register_line = account.121.reg_fail_retry_interval = account.121.reg_failed_retry_min_time = account.121.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.121.conf_type =
account.121.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-121%
account.121.sip_server_type = account.121.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 587 OF 1142
########################################################################## ############# ##DECT V81 Add
account.121.register_expires_overlap = account.121.subscribe_expires_overlap = account.121.auto_dial_enable = account.121.auto_dial_num = account.121.cp_source = account.121.transfer_refer_to_contact_header.enable = #V80 Add account.121.custom_ua = account.121.callpark_enable = account.121.check_cseq.enable = account.121.check_to_tag.enable = account.121.hold_use_inactive = account.121.line_seize.expires = account.121.update_ack_while_dialing = account.121.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.121.always_fwd.enable =
account.121.always_fwd.target =
account.121.always_fwd.off_code =
account.121.always_fwd.on_code =
account.121.busy_fwd.enable =
account.121.busy_fwd.target =
account.121.busy_fwd.off_code =
account.121.busy_fwd.on_code =
account.121.timeout_fwd.enable =
account.121.timeout_fwd.target =
account.121.timeout_fwd.timeout =
account.121.timeout_fwd.off_code =
account.121.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.121.dnd.enable =
account.121.dnd.on_code =
account.121.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.121.reg.enable =
handset.121.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 588 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.121.xsi.user =%BWLOGIN-ID-121% account.121.xsi.password =%XSIPASSWORD-121% account.121.xsi.host =%XSP_ADDRESS% account.121.xsi.server_type = account.121.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.121.ldap.enable =
handset.121.ldap.name_filter=
handset.121.ldap.number_filter=
handset.121.ldap.host=
handset.121.ldap.port=
handset.121.ldap.base=
handset.121.ldap.user=
handset.121.ldap.password=
handset.121.ldap.max_hits=
handset.121.ldap.name_attr=
handset.121.ldap.numb_attr=
handset.121.ldap.display_name=
handset.121.ldap.version=
handset.121.ldap.call_in_lookup=
handset.121.ldap.ldap_sort=
handset.121.ldap.tls_mode=
handset.121.ldap.call_out_lookup=
handset.121.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account122 Settings
##
##########################################################################
#############
account.122.enable=%BWLINE-BINARY-122% account.122.label=%BWEXTENSION-122% account.122.display_name=%BWCLID-122% account.122.auth_name=%BWAUTHUSER-122% account.122.user_name=%BWLINEPORT-122% account.122.password=%BWAUTHPASSWORD-122%
#W80B ADD account.122.sip_server.template = account.122.media_transmit.enable =
account.122.alarm.template = account.122.alarm.server = account.122.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 589 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.122.sip_server.1.failback_mode =
account.122.sip_server.1.failback_timeout =
account.122.sip_server.1.register_on_enable =
account.122.sip_server.1.failback_subscribe.enable =
account.122.sip_server.1.invite_retry_counts =
account.122.sip_server.1.only_signal_with_registered =
account.122.sip_server.2.failback_mode = account.122.sip_server.2.failback_timeout = account.122.sip_server.2.register_on_enable = account.122.sip_server.2.failback_subscribe.enable = account.122.sip_server.2.invite_retry_counts = account.122.sip_server.2.only_signal_with_registered =
account.122.naptr_build = account.122.fallback.redundancy_type = account.122.fallback.timeout =
account.122.dns_cache_type = account.122.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.122.anonymous_call =
account.122.reject_anonymous_call =
account.122.send_anonymous_code =
account.122.anonymous_call_oncode =
account.122.anonymous_call_offcode =
account.122.send_anonymous_rejection_code =
account.122.anonymous_reject_oncode =
account.122.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.122.codec.g722.enable =
account.122.codec.g722.priority =
account.122.codec.g729.enable = account.122.codec.g729.priority =
account.122.codec.g726_16.enable = account.122.codec.g726_16.priority =
account.122.codec.g726_24.enable = account.122.codec.g726_24.priority =
account.122.codec.g726_32.enable = account.122.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 590 OF 1142
account.122.codec.g726_40.enable = account.122.codec.g726_40.priority =
account.122.codec.ilbc.enable = account.122.codec.ilbc.priority =
account.122.codec.pcmu.enable = account.122.codec.pcmu.priority =
account.122.codec.pcma.enable = account.122.codec.pcma.priority =
account.122.codec.opus.enable = account.122.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.122.nat.nat_traversal = account.122.nat.udp_update_enable = account.122.nat.udp_update_time = account.122.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.122.blf.subscribe_period = account.122.dtmf.type = account.122.dtmf.dtmf_payload = account.122.dtmf.info_type = account.122.100rel_enable = account.122.subscribe_register = account.122.subscribe_mwi = account.122.subscribe_mwi_expires = account.122.subscribe_mwi_to_vm = voice_mail.number.122 = %BWVOICE-PORTAL-NUMBER-122% account.122.display_mwi.enable = account.122.cid_source = account.122.cid_source_privacy = account.122.cid_source_ppi = account.122.session_timer.enable = account.122.session_timer.expires = account.122.session_timer.refresher = account.122.enable_user_equal_phone = account.122.srtp_encryption = account.122.ptime = account.122.shared_line = %BWSHAREDLINE-BINARY-122% account.122.register_mac = account.122.register_line = account.122.reg_fail_retry_interval = account.122.reg_failed_retry_min_time = account.122.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 591 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.122.conf_type =
account.122.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-122%
account.122.sip_server_type = account.122.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.122.register_expires_overlap = account.122.subscribe_expires_overlap = account.122.auto_dial_enable = account.122.auto_dial_num = account.122.cp_source = account.122.transfer_refer_to_contact_header.enable = #V80 Add account.122.custom_ua = account.122.callpark_enable = account.122.check_cseq.enable = account.122.check_to_tag.enable = account.122.hold_use_inactive = account.122.line_seize.expires = account.122.update_ack_while_dialing = account.122.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.122.always_fwd.enable =
account.122.always_fwd.target =
account.122.always_fwd.off_code =
account.122.always_fwd.on_code =
account.122.busy_fwd.enable =
account.122.busy_fwd.target =
account.122.busy_fwd.off_code =
account.122.busy_fwd.on_code =
account.122.timeout_fwd.enable =
account.122.timeout_fwd.target =
account.122.timeout_fwd.timeout =
account.122.timeout_fwd.off_code =
account.122.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 592 OF 1142
account.122.dnd.enable = account.122.dnd.on_code = account.122.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.122.reg.enable =
handset.122.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.122.xsi.user =%BWLOGIN-ID-122% account.122.xsi.password =%XSIPASSWORD-122% account.122.xsi.host =%XSP_ADDRESS% account.122.xsi.server_type = account.122.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.122.ldap.enable =
handset.122.ldap.name_filter=
handset.122.ldap.number_filter=
handset.122.ldap.host=
handset.122.ldap.port=
handset.122.ldap.base=
handset.122.ldap.user=
handset.122.ldap.password=
handset.122.ldap.max_hits=
handset.122.ldap.name_attr=
handset.122.ldap.numb_attr=
handset.122.ldap.display_name=
handset.122.ldap.version=
handset.122.ldap.call_in_lookup=
handset.122.ldap.ldap_sort=
handset.122.ldap.tls_mode=
handset.122.ldap.call_out_lookup=
handset.122.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account123 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 593 OF 1142
account.123.enable=%BWLINE-BINARY-123% account.123.label=%BWEXTENSION-123% account.123.display_name=%BWCLID-123% account.123.auth_name=%BWAUTHUSER-123% account.123.user_name=%BWLINEPORT-123% account.123.password=%BWAUTHPASSWORD-123%
#W80B ADD account.123.sip_server.template = account.123.media_transmit.enable =
account.123.alarm.template = account.123.alarm.server = account.123.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.123.sip_server.1.failback_mode =
account.123.sip_server.1.failback_timeout =
account.123.sip_server.1.register_on_enable =
account.123.sip_server.1.failback_subscribe.enable =
account.123.sip_server.1.invite_retry_counts =
account.123.sip_server.1.only_signal_with_registered =
account.123.sip_server.2.failback_mode = account.123.sip_server.2.failback_timeout = account.123.sip_server.2.register_on_enable = account.123.sip_server.2.failback_subscribe.enable = account.123.sip_server.2.invite_retry_counts = account.123.sip_server.2.only_signal_with_registered =
account.123.naptr_build = account.123.fallback.redundancy_type = account.123.fallback.timeout =
account.123.dns_cache_type = account.123.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.123.anonymous_call =
account.123.reject_anonymous_call =
account.123.send_anonymous_code =
account.123.anonymous_call_oncode =
account.123.anonymous_call_offcode =
account.123.send_anonymous_rejection_code =
account.123.anonymous_reject_oncode =
account.123.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 594 OF 1142
########################################################################## ############# account.123.codec.g722.enable = account.123.codec.g722.priority =
account.123.codec.g729.enable = account.123.codec.g729.priority =
account.123.codec.g726_16.enable = account.123.codec.g726_16.priority =
account.123.codec.g726_24.enable = account.123.codec.g726_24.priority =
account.123.codec.g726_32.enable = account.123.codec.g726_32.priority =
account.123.codec.g726_40.enable = account.123.codec.g726_40.priority =
account.123.codec.ilbc.enable = account.123.codec.ilbc.priority =
account.123.codec.pcmu.enable = account.123.codec.pcmu.priority =
account.123.codec.pcma.enable = account.123.codec.pcma.priority =
account.123.codec.opus.enable = account.123.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.123.nat.nat_traversal = account.123.nat.udp_update_enable = account.123.nat.udp_update_time = account.123.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.123.blf.subscribe_period = account.123.dtmf.type = account.123.dtmf.dtmf_payload = account.123.dtmf.info_type = account.123.100rel_enable = account.123.subscribe_register = account.123.subscribe_mwi = account.123.subscribe_mwi_expires = account.123.subscribe_mwi_to_vm = voice_mail.number.123 = %BWVOICE-PORTAL-NUMBER-123% account.123.display_mwi.enable = account.123.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 595 OF 1142
account.123.cid_source_privacy = account.123.cid_source_ppi = account.123.session_timer.enable = account.123.session_timer.expires = account.123.session_timer.refresher = account.123.enable_user_equal_phone = account.123.srtp_encryption = account.123.ptime = account.123.shared_line = %BWSHAREDLINE-BINARY-123% account.123.register_mac = account.123.register_line = account.123.reg_fail_retry_interval = account.123.reg_failed_retry_min_time = account.123.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.123.conf_type =
account.123.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-123%
account.123.sip_server_type = account.123.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.123.register_expires_overlap = account.123.subscribe_expires_overlap = account.123.auto_dial_enable = account.123.auto_dial_num = account.123.cp_source = account.123.transfer_refer_to_contact_header.enable = #V80 Add account.123.custom_ua = account.123.callpark_enable = account.123.check_cseq.enable = account.123.check_to_tag.enable = account.123.hold_use_inactive = account.123.line_seize.expires = account.123.update_ack_while_dialing = account.123.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.123.always_fwd.enable =
account.123.always_fwd.target =
account.123.always_fwd.off_code =
account.123.always_fwd.on_code =
account.123.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 596 OF 1142
account.123.busy_fwd.target = account.123.busy_fwd.off_code = account.123.busy_fwd.on_code = account.123.timeout_fwd.enable = account.123.timeout_fwd.target = account.123.timeout_fwd.timeout = account.123.timeout_fwd.off_code = account.123.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.123.dnd.enable =
account.123.dnd.on_code =
account.123.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.123.reg.enable =
handset.123.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.123.xsi.user =%BWLOGIN-ID-123% account.123.xsi.password =%XSIPASSWORD-123% account.123.xsi.host =%XSP_ADDRESS% account.123.xsi.server_type = account.123.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.123.ldap.enable =
handset.123.ldap.name_filter=
handset.123.ldap.number_filter=
handset.123.ldap.host=
handset.123.ldap.port=
handset.123.ldap.base=
handset.123.ldap.user=
handset.123.ldap.password=
handset.123.ldap.max_hits=
handset.123.ldap.name_attr=
handset.123.ldap.numb_attr=
handset.123.ldap.display_name=
handset.123.ldap.version=
handset.123.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 597 OF 1142
handset.123.ldap.ldap_sort= handset.123.ldap.tls_mode= handset.123.ldap.call_out_lookup= handset.123.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account124 Settings
##
##########################################################################
#############
account.124.enable=%BWLINE-BINARY-124% account.124.label=%BWEXTENSION-124% account.124.display_name=%BWCLID-124% account.124.auth_name=%BWAUTHUSER-124% account.124.user_name=%BWLINEPORT-124% account.124.password=%BWAUTHPASSWORD-124%
#W80B ADD account.124.sip_server.template = account.124.media_transmit.enable =
account.124.alarm.template = account.124.alarm.server = account.124.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.124.sip_server.1.failback_mode =
account.124.sip_server.1.failback_timeout =
account.124.sip_server.1.register_on_enable =
account.124.sip_server.1.failback_subscribe.enable =
account.124.sip_server.1.invite_retry_counts =
account.124.sip_server.1.only_signal_with_registered =
account.124.sip_server.2.failback_mode = account.124.sip_server.2.failback_timeout = account.124.sip_server.2.register_on_enable = account.124.sip_server.2.failback_subscribe.enable = account.124.sip_server.2.invite_retry_counts = account.124.sip_server.2.only_signal_with_registered =
account.124.naptr_build = account.124.fallback.redundancy_type = account.124.fallback.timeout =
account.124.dns_cache_type = account.124.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 598 OF 1142
account.124.anonymous_call = account.124.reject_anonymous_call = account.124.send_anonymous_code = account.124.anonymous_call_oncode = account.124.anonymous_call_offcode = account.124.send_anonymous_rejection_code = account.124.anonymous_reject_oncode = account.124.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.124.codec.g722.enable =
account.124.codec.g722.priority =
account.124.codec.g729.enable = account.124.codec.g729.priority =
account.124.codec.g726_16.enable = account.124.codec.g726_16.priority =
account.124.codec.g726_24.enable = account.124.codec.g726_24.priority =
account.124.codec.g726_32.enable = account.124.codec.g726_32.priority =
account.124.codec.g726_40.enable = account.124.codec.g726_40.priority =
account.124.codec.ilbc.enable = account.124.codec.ilbc.priority =
account.124.codec.pcmu.enable = account.124.codec.pcmu.priority =
account.124.codec.pcma.enable = account.124.codec.pcma.priority =
account.124.codec.opus.enable = account.124.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.124.nat.nat_traversal = account.124.nat.udp_update_enable = account.124.nat.udp_update_time = account.124.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 599 OF 1142
########################################################################## #############
account.124.blf.subscribe_period = account.124.dtmf.type = account.124.dtmf.dtmf_payload = account.124.dtmf.info_type = account.124.100rel_enable = account.124.subscribe_register = account.124.subscribe_mwi = account.124.subscribe_mwi_expires = account.124.subscribe_mwi_to_vm = voice_mail.number.124 = %BWVOICE-PORTAL-NUMBER-124% account.124.display_mwi.enable = account.124.cid_source = account.124.cid_source_privacy = account.124.cid_source_ppi = account.124.session_timer.enable = account.124.session_timer.expires = account.124.session_timer.refresher = account.124.enable_user_equal_phone = account.124.srtp_encryption = account.124.ptime = account.124.shared_line = %BWSHAREDLINE-BINARY-124% account.124.register_mac = account.124.register_line = account.124.reg_fail_retry_interval = account.124.reg_failed_retry_min_time = account.124.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.124.conf_type =
account.124.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-124%
account.124.sip_server_type = account.124.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.124.register_expires_overlap = account.124.subscribe_expires_overlap = account.124.auto_dial_enable = account.124.auto_dial_num = account.124.cp_source = account.124.transfer_refer_to_contact_header.enable = #V80 Add account.124.custom_ua = account.124.callpark_enable = account.124.check_cseq.enable = account.124.check_to_tag.enable = account.124.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 600 OF 1142
account.124.line_seize.expires = account.124.update_ack_while_dialing = account.124.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.124.always_fwd.enable =
account.124.always_fwd.target =
account.124.always_fwd.off_code =
account.124.always_fwd.on_code =
account.124.busy_fwd.enable =
account.124.busy_fwd.target =
account.124.busy_fwd.off_code =
account.124.busy_fwd.on_code =
account.124.timeout_fwd.enable =
account.124.timeout_fwd.target =
account.124.timeout_fwd.timeout =
account.124.timeout_fwd.off_code =
account.124.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.124.dnd.enable =
account.124.dnd.on_code =
account.124.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.124.reg.enable =
handset.124.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.124.xsi.user =%BWLOGIN-ID-124% account.124.xsi.password =%XSIPASSWORD-124% account.124.xsi.host =%XSP_ADDRESS% account.124.xsi.server_type = account.124.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 601 OF 1142
########################################################################## ############# handset.124.ldap.enable = handset.124.ldap.name_filter= handset.124.ldap.number_filter= handset.124.ldap.host= handset.124.ldap.port= handset.124.ldap.base= handset.124.ldap.user= handset.124.ldap.password= handset.124.ldap.max_hits= handset.124.ldap.name_attr= handset.124.ldap.numb_attr= handset.124.ldap.display_name= handset.124.ldap.version= handset.124.ldap.call_in_lookup= handset.124.ldap.ldap_sort= handset.124.ldap.tls_mode= handset.124.ldap.call_out_lookup= handset.124.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account125 Settings
##
##########################################################################
#############
account.125.enable=%BWLINE-BINARY-125% account.125.label=%BWEXTENSION-125% account.125.display_name=%BWCLID-125% account.125.auth_name=%BWAUTHUSER-125% account.125.user_name=%BWLINEPORT-125% account.125.password=%BWAUTHPASSWORD-125%
#W80B ADD account.125.sip_server.template = account.125.media_transmit.enable =
account.125.alarm.template = account.125.alarm.server = account.125.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.125.sip_server.1.failback_mode =
account.125.sip_server.1.failback_timeout =
account.125.sip_server.1.register_on_enable =
account.125.sip_server.1.failback_subscribe.enable =
account.125.sip_server.1.invite_retry_counts =
account.125.sip_server.1.only_signal_with_registered =
account.125.sip_server.2.failback_mode = account.125.sip_server.2.failback_timeout = account.125.sip_server.2.register_on_enable = account.125.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 602 OF 1142
account.125.sip_server.2.invite_retry_counts = account.125.sip_server.2.only_signal_with_registered =
account.125.naptr_build = account.125.fallback.redundancy_type = account.125.fallback.timeout =
account.125.dns_cache_type = account.125.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.125.anonymous_call =
account.125.reject_anonymous_call =
account.125.send_anonymous_code =
account.125.anonymous_call_oncode =
account.125.anonymous_call_offcode =
account.125.send_anonymous_rejection_code =
account.125.anonymous_reject_oncode =
account.125.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.125.codec.g722.enable =
account.125.codec.g722.priority =
account.125.codec.g729.enable = account.125.codec.g729.priority =
account.125.codec.g726_16.enable = account.125.codec.g726_16.priority =
account.125.codec.g726_24.enable = account.125.codec.g726_24.priority =
account.125.codec.g726_32.enable = account.125.codec.g726_32.priority =
account.125.codec.g726_40.enable = account.125.codec.g726_40.priority =
account.125.codec.ilbc.enable = account.125.codec.ilbc.priority =
account.125.codec.pcmu.enable = account.125.codec.pcmu.priority =
account.125.codec.pcma.enable = account.125.codec.pcma.priority =
account.125.codec.opus.enable = account.125.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 603 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.125.nat.nat_traversal = account.125.nat.udp_update_enable = account.125.nat.udp_update_time = account.125.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.125.blf.subscribe_period = account.125.dtmf.type = account.125.dtmf.dtmf_payload = account.125.dtmf.info_type = account.125.100rel_enable = account.125.subscribe_register = account.125.subscribe_mwi = account.125.subscribe_mwi_expires = account.125.subscribe_mwi_to_vm = voice_mail.number.125 = %BWVOICE-PORTAL-NUMBER-125% account.125.display_mwi.enable = account.125.cid_source = account.125.cid_source_privacy = account.125.cid_source_ppi = account.125.session_timer.enable = account.125.session_timer.expires = account.125.session_timer.refresher = account.125.enable_user_equal_phone = account.125.srtp_encryption = account.125.ptime = account.125.shared_line = %BWSHAREDLINE-BINARY-125% account.125.register_mac = account.125.register_line = account.125.reg_fail_retry_interval = account.125.reg_failed_retry_min_time = account.125.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.125.conf_type =
account.125.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-125%
account.125.sip_server_type = account.125.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 604 OF 1142
########################################################################## ############# ##DECT V81 Add
account.125.register_expires_overlap = account.125.subscribe_expires_overlap = account.125.auto_dial_enable = account.125.auto_dial_num = account.125.cp_source = account.125.transfer_refer_to_contact_header.enable = #V80 Add account.125.custom_ua = account.125.callpark_enable = account.125.check_cseq.enable = account.125.check_to_tag.enable = account.125.hold_use_inactive = account.125.line_seize.expires = account.125.update_ack_while_dialing = account.125.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.125.always_fwd.enable =
account.125.always_fwd.target =
account.125.always_fwd.off_code =
account.125.always_fwd.on_code =
account.125.busy_fwd.enable =
account.125.busy_fwd.target =
account.125.busy_fwd.off_code =
account.125.busy_fwd.on_code =
account.125.timeout_fwd.enable =
account.125.timeout_fwd.target =
account.125.timeout_fwd.timeout =
account.125.timeout_fwd.off_code =
account.125.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.125.dnd.enable =
account.125.dnd.on_code =
account.125.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.125.reg.enable =
handset.125.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 605 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.125.xsi.user =%BWLOGIN-ID-125% account.125.xsi.password =%XSIPASSWORD-125% account.125.xsi.host =%XSP_ADDRESS% account.125.xsi.server_type = account.125.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.125.ldap.enable =
handset.125.ldap.name_filter=
handset.125.ldap.number_filter=
handset.125.ldap.host=
handset.125.ldap.port=
handset.125.ldap.base=
handset.125.ldap.user=
handset.125.ldap.password=
handset.125.ldap.max_hits=
handset.125.ldap.name_attr=
handset.125.ldap.numb_attr=
handset.125.ldap.display_name=
handset.125.ldap.version=
handset.125.ldap.call_in_lookup=
handset.125.ldap.ldap_sort=
handset.125.ldap.tls_mode=
handset.125.ldap.call_out_lookup=
handset.125.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account126 Settings
##
##########################################################################
#############
account.126.enable=%BWLINE-BINARY-126% account.126.label=%BWEXTENSION-126% account.126.display_name=%BWCLID-126% account.126.auth_name=%BWAUTHUSER-126% account.126.user_name=%BWLINEPORT-126% account.126.password=%BWAUTHPASSWORD-126%
#W80B ADD account.126.sip_server.template = account.126.media_transmit.enable =
account.126.alarm.template = account.126.alarm.server = account.126.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 606 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.126.sip_server.1.failback_mode =
account.126.sip_server.1.failback_timeout =
account.126.sip_server.1.register_on_enable =
account.126.sip_server.1.failback_subscribe.enable =
account.126.sip_server.1.invite_retry_counts =
account.126.sip_server.1.only_signal_with_registered =
account.126.sip_server.2.failback_mode = account.126.sip_server.2.failback_timeout = account.126.sip_server.2.register_on_enable = account.126.sip_server.2.failback_subscribe.enable = account.126.sip_server.2.invite_retry_counts = account.126.sip_server.2.only_signal_with_registered =
account.126.naptr_build = account.126.fallback.redundancy_type = account.126.fallback.timeout =
account.126.dns_cache_type = account.126.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.126.anonymous_call =
account.126.reject_anonymous_call =
account.126.send_anonymous_code =
account.126.anonymous_call_oncode =
account.126.anonymous_call_offcode =
account.126.send_anonymous_rejection_code =
account.126.anonymous_reject_oncode =
account.126.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.126.codec.g722.enable =
account.126.codec.g722.priority =
account.126.codec.g729.enable = account.126.codec.g729.priority =
account.126.codec.g726_16.enable = account.126.codec.g726_16.priority =
account.126.codec.g726_24.enable = account.126.codec.g726_24.priority =
account.126.codec.g726_32.enable = account.126.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 607 OF 1142
account.126.codec.g726_40.enable = account.126.codec.g726_40.priority =
account.126.codec.ilbc.enable = account.126.codec.ilbc.priority =
account.126.codec.pcmu.enable = account.126.codec.pcmu.priority =
account.126.codec.pcma.enable = account.126.codec.pcma.priority =
account.126.codec.opus.enable = account.126.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.126.nat.nat_traversal = account.126.nat.udp_update_enable = account.126.nat.udp_update_time = account.126.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.126.blf.subscribe_period = account.126.dtmf.type = account.126.dtmf.dtmf_payload = account.126.dtmf.info_type = account.126.100rel_enable = account.126.subscribe_register = account.126.subscribe_mwi = account.126.subscribe_mwi_expires = account.126.subscribe_mwi_to_vm = voice_mail.number.126 = %BWVOICE-PORTAL-NUMBER-126% account.126.display_mwi.enable = account.126.cid_source = account.126.cid_source_privacy = account.126.cid_source_ppi = account.126.session_timer.enable = account.126.session_timer.expires = account.126.session_timer.refresher = account.126.enable_user_equal_phone = account.126.srtp_encryption = account.126.ptime = account.126.shared_line = %BWSHAREDLINE-BINARY-126% account.126.register_mac = account.126.register_line = account.126.reg_fail_retry_interval = account.126.reg_failed_retry_min_time = account.126.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 608 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.126.conf_type =
account.126.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-126%
account.126.sip_server_type = account.126.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.126.register_expires_overlap = account.126.subscribe_expires_overlap = account.126.auto_dial_enable = account.126.auto_dial_num = account.126.cp_source = account.126.transfer_refer_to_contact_header.enable = #V80 Add account.126.custom_ua = account.126.callpark_enable = account.126.check_cseq.enable = account.126.check_to_tag.enable = account.126.hold_use_inactive = account.126.line_seize.expires = account.126.update_ack_while_dialing = account.126.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.126.always_fwd.enable =
account.126.always_fwd.target =
account.126.always_fwd.off_code =
account.126.always_fwd.on_code =
account.126.busy_fwd.enable =
account.126.busy_fwd.target =
account.126.busy_fwd.off_code =
account.126.busy_fwd.on_code =
account.126.timeout_fwd.enable =
account.126.timeout_fwd.target =
account.126.timeout_fwd.timeout =
account.126.timeout_fwd.off_code =
account.126.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 609 OF 1142
account.126.dnd.enable = account.126.dnd.on_code = account.126.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.126.reg.enable =
handset.126.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.126.xsi.user =%BWLOGIN-ID-126% account.126.xsi.password =%XSIPASSWORD-126% account.126.xsi.host =%XSP_ADDRESS% account.126.xsi.server_type = account.126.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.126.ldap.enable =
handset.126.ldap.name_filter=
handset.126.ldap.number_filter=
handset.126.ldap.host=
handset.126.ldap.port=
handset.126.ldap.base=
handset.126.ldap.user=
handset.126.ldap.password=
handset.126.ldap.max_hits=
handset.126.ldap.name_attr=
handset.126.ldap.numb_attr=
handset.126.ldap.display_name=
handset.126.ldap.version=
handset.126.ldap.call_in_lookup=
handset.126.ldap.ldap_sort=
handset.126.ldap.tls_mode=
handset.126.ldap.call_out_lookup=
handset.126.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account127 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 610 OF 1142
account.127.enable=%BWLINE-BINARY-127% account.127.label=%BWEXTENSION-127% account.127.display_name=%BWCLID-127% account.127.auth_name=%BWAUTHUSER-127% account.127.user_name=%BWLINEPORT-127% account.127.password=%BWAUTHPASSWORD-127%
#W80B ADD account.127.sip_server.template = account.127.media_transmit.enable =
account.127.alarm.template = account.127.alarm.server = account.127.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.127.sip_server.1.failback_mode =
account.127.sip_server.1.failback_timeout =
account.127.sip_server.1.register_on_enable =
account.127.sip_server.1.failback_subscribe.enable =
account.127.sip_server.1.invite_retry_counts =
account.127.sip_server.1.only_signal_with_registered =
account.127.sip_server.2.failback_mode = account.127.sip_server.2.failback_timeout = account.127.sip_server.2.register_on_enable = account.127.sip_server.2.failback_subscribe.enable = account.127.sip_server.2.invite_retry_counts = account.127.sip_server.2.only_signal_with_registered =
account.127.naptr_build = account.127.fallback.redundancy_type = account.127.fallback.timeout =
account.127.dns_cache_type = account.127.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.127.anonymous_call =
account.127.reject_anonymous_call =
account.127.send_anonymous_code =
account.127.anonymous_call_oncode =
account.127.anonymous_call_offcode =
account.127.send_anonymous_rejection_code =
account.127.anonymous_reject_oncode =
account.127.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 611 OF 1142
########################################################################## ############# account.127.codec.g722.enable = account.127.codec.g722.priority =
account.127.codec.g729.enable = account.127.codec.g729.priority =
account.127.codec.g726_16.enable = account.127.codec.g726_16.priority =
account.127.codec.g726_24.enable = account.127.codec.g726_24.priority =
account.127.codec.g726_32.enable = account.127.codec.g726_32.priority =
account.127.codec.g726_40.enable = account.127.codec.g726_40.priority =
account.127.codec.ilbc.enable = account.127.codec.ilbc.priority =
account.127.codec.pcmu.enable = account.127.codec.pcmu.priority =
account.127.codec.pcma.enable = account.127.codec.pcma.priority =
account.127.codec.opus.enable = account.127.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.127.nat.nat_traversal = account.127.nat.udp_update_enable = account.127.nat.udp_update_time = account.127.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.127.blf.subscribe_period = account.127.dtmf.type = account.127.dtmf.dtmf_payload = account.127.dtmf.info_type = account.127.100rel_enable = account.127.subscribe_register = account.127.subscribe_mwi = account.127.subscribe_mwi_expires = account.127.subscribe_mwi_to_vm = voice_mail.number.127 = %BWVOICE-PORTAL-NUMBER-127% account.127.display_mwi.enable = account.127.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 612 OF 1142
account.127.cid_source_privacy = account.127.cid_source_ppi = account.127.session_timer.enable = account.127.session_timer.expires = account.127.session_timer.refresher = account.127.enable_user_equal_phone = account.127.srtp_encryption = account.127.ptime = account.127.shared_line = %BWSHAREDLINE-BINARY-127% account.127.register_mac = account.127.register_line = account.127.reg_fail_retry_interval = account.127.reg_failed_retry_min_time = account.127.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.127.conf_type =
account.127.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-127%
account.127.sip_server_type = account.127.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.127.register_expires_overlap = account.127.subscribe_expires_overlap = account.127.auto_dial_enable = account.127.auto_dial_num = account.127.cp_source = account.127.transfer_refer_to_contact_header.enable = #V80 Add account.127.custom_ua = account.127.callpark_enable = account.127.check_cseq.enable = account.127.check_to_tag.enable = account.127.hold_use_inactive = account.127.line_seize.expires = account.127.update_ack_while_dialing = account.127.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.127.always_fwd.enable =
account.127.always_fwd.target =
account.127.always_fwd.off_code =
account.127.always_fwd.on_code =
account.127.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 613 OF 1142
account.127.busy_fwd.target = account.127.busy_fwd.off_code = account.127.busy_fwd.on_code = account.127.timeout_fwd.enable = account.127.timeout_fwd.target = account.127.timeout_fwd.timeout = account.127.timeout_fwd.off_code = account.127.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.127.dnd.enable =
account.127.dnd.on_code =
account.127.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.127.reg.enable =
handset.127.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.127.xsi.user =%BWLOGIN-ID-127% account.127.xsi.password =%XSIPASSWORD-127% account.127.xsi.host =%XSP_ADDRESS% account.127.xsi.server_type = account.127.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.127.ldap.enable =
handset.127.ldap.name_filter=
handset.127.ldap.number_filter=
handset.127.ldap.host=
handset.127.ldap.port=
handset.127.ldap.base=
handset.127.ldap.user=
handset.127.ldap.password=
handset.127.ldap.max_hits=
handset.127.ldap.name_attr=
handset.127.ldap.numb_attr=
handset.127.ldap.display_name=
handset.127.ldap.version=
handset.127.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 614 OF 1142
handset.127.ldap.ldap_sort= handset.127.ldap.tls_mode= handset.127.ldap.call_out_lookup= handset.127.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account128 Settings
##
##########################################################################
#############
account.128.enable=%BWLINE-BINARY-128% account.128.label=%BWEXTENSION-128% account.128.display_name=%BWCLID-128% account.128.auth_name=%BWAUTHUSER-128% account.128.user_name=%BWLINEPORT-128% account.128.password=%BWAUTHPASSWORD-128%
#W80B ADD account.128.sip_server.template = account.128.media_transmit.enable =
account.128.alarm.template = account.128.alarm.server = account.128.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.128.sip_server.1.failback_mode =
account.128.sip_server.1.failback_timeout =
account.128.sip_server.1.register_on_enable =
account.128.sip_server.1.failback_subscribe.enable =
account.128.sip_server.1.invite_retry_counts =
account.128.sip_server.1.only_signal_with_registered =
account.128.sip_server.2.failback_mode = account.128.sip_server.2.failback_timeout = account.128.sip_server.2.register_on_enable = account.128.sip_server.2.failback_subscribe.enable = account.128.sip_server.2.invite_retry_counts = account.128.sip_server.2.only_signal_with_registered =
account.128.naptr_build = account.128.fallback.redundancy_type = account.128.fallback.timeout =
account.128.dns_cache_type = account.128.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 615 OF 1142
account.128.anonymous_call = account.128.reject_anonymous_call = account.128.send_anonymous_code = account.128.anonymous_call_oncode = account.128.anonymous_call_offcode = account.128.send_anonymous_rejection_code = account.128.anonymous_reject_oncode = account.128.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.128.codec.g722.enable =
account.128.codec.g722.priority =
account.128.codec.g729.enable = account.128.codec.g729.priority =
account.128.codec.g726_16.enable = account.128.codec.g726_16.priority =
account.128.codec.g726_24.enable = account.128.codec.g726_24.priority =
account.128.codec.g726_32.enable = account.128.codec.g726_32.priority =
account.128.codec.g726_40.enable = account.128.codec.g726_40.priority =
account.128.codec.ilbc.enable = account.128.codec.ilbc.priority =
account.128.codec.pcmu.enable = account.128.codec.pcmu.priority =
account.128.codec.pcma.enable = account.128.codec.pcma.priority =
account.128.codec.opus.enable = account.128.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.128.nat.nat_traversal = account.128.nat.udp_update_enable = account.128.nat.udp_update_time = account.128.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 616 OF 1142
########################################################################## #############
account.128.blf.subscribe_period = account.128.dtmf.type = account.128.dtmf.dtmf_payload = account.128.dtmf.info_type = account.128.100rel_enable = account.128.subscribe_register = account.128.subscribe_mwi = account.128.subscribe_mwi_expires = account.128.subscribe_mwi_to_vm = voice_mail.number.128 = %BWVOICE-PORTAL-NUMBER-128% account.128.display_mwi.enable = account.128.cid_source = account.128.cid_source_privacy = account.128.cid_source_ppi = account.128.session_timer.enable = account.128.session_timer.expires = account.128.session_timer.refresher = account.128.enable_user_equal_phone = account.128.srtp_encryption = account.128.ptime = account.128.shared_line = %BWSHAREDLINE-BINARY-128% account.128.register_mac = account.128.register_line = account.128.reg_fail_retry_interval = account.128.reg_failed_retry_min_time = account.128.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.128.conf_type =
account.128.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-128%
account.128.sip_server_type = account.128.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.128.register_expires_overlap = account.128.subscribe_expires_overlap = account.128.auto_dial_enable = account.128.auto_dial_num = account.128.cp_source = account.128.transfer_refer_to_contact_header.enable = #V80 Add account.128.custom_ua = account.128.callpark_enable = account.128.check_cseq.enable = account.128.check_to_tag.enable = account.128.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 617 OF 1142
account.128.line_seize.expires = account.128.update_ack_while_dialing = account.128.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.128.always_fwd.enable =
account.128.always_fwd.target =
account.128.always_fwd.off_code =
account.128.always_fwd.on_code =
account.128.busy_fwd.enable =
account.128.busy_fwd.target =
account.128.busy_fwd.off_code =
account.128.busy_fwd.on_code =
account.128.timeout_fwd.enable =
account.128.timeout_fwd.target =
account.128.timeout_fwd.timeout =
account.128.timeout_fwd.off_code =
account.128.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.128.dnd.enable =
account.128.dnd.on_code =
account.128.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.128.reg.enable =
handset.128.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.128.xsi.user =%BWLOGIN-ID-128% account.128.xsi.password =%XSIPASSWORD-128% account.128.xsi.host =%XSP_ADDRESS% account.128.xsi.server_type = account.128.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 618 OF 1142
########################################################################## ############# handset.128.ldap.enable = handset.128.ldap.name_filter= handset.128.ldap.number_filter= handset.128.ldap.host= handset.128.ldap.port= handset.128.ldap.base= handset.128.ldap.user= handset.128.ldap.password= handset.128.ldap.max_hits= handset.128.ldap.name_attr= handset.128.ldap.numb_attr= handset.128.ldap.display_name= handset.128.ldap.version= handset.128.ldap.call_in_lookup= handset.128.ldap.ldap_sort= handset.128.ldap.tls_mode= handset.128.ldap.call_out_lookup= handset.128.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account129 Settings
##
##########################################################################
#############
account.129.enable=%BWLINE-BINARY-129% account.129.label=%BWEXTENSION-129% account.129.display_name=%BWCLID-129% account.129.auth_name=%BWAUTHUSER-129% account.129.user_name=%BWLINEPORT-129% account.129.password=%BWAUTHPASSWORD-129%
#W80B ADD account.129.sip_server.template = account.129.media_transmit.enable =
account.129.alarm.template = account.129.alarm.server = account.129.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.129.sip_server.1.failback_mode =
account.129.sip_server.1.failback_timeout =
account.129.sip_server.1.register_on_enable =
account.129.sip_server.1.failback_subscribe.enable =
account.129.sip_server.1.invite_retry_counts =
account.129.sip_server.1.only_signal_with_registered =
account.129.sip_server.2.failback_mode = account.129.sip_server.2.failback_timeout = account.129.sip_server.2.register_on_enable = account.129.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 619 OF 1142
account.129.sip_server.2.invite_retry_counts = account.129.sip_server.2.only_signal_with_registered =
account.129.naptr_build = account.129.fallback.redundancy_type = account.129.fallback.timeout =
account.129.dns_cache_type = account.129.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.129.anonymous_call =
account.129.reject_anonymous_call =
account.129.send_anonymous_code =
account.129.anonymous_call_oncode =
account.129.anonymous_call_offcode =
account.129.send_anonymous_rejection_code =
account.129.anonymous_reject_oncode =
account.129.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.129.codec.g722.enable =
account.129.codec.g722.priority =
account.129.codec.g729.enable = account.129.codec.g729.priority =
account.129.codec.g726_16.enable = account.129.codec.g726_16.priority =
account.129.codec.g726_24.enable = account.129.codec.g726_24.priority =
account.129.codec.g726_32.enable = account.129.codec.g726_32.priority =
account.129.codec.g726_40.enable = account.129.codec.g726_40.priority =
account.129.codec.ilbc.enable = account.129.codec.ilbc.priority =
account.129.codec.pcmu.enable = account.129.codec.pcmu.priority =
account.129.codec.pcma.enable = account.129.codec.pcma.priority =
account.129.codec.opus.enable = account.129.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 620 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.129.nat.nat_traversal = account.129.nat.udp_update_enable = account.129.nat.udp_update_time = account.129.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.129.blf.subscribe_period = account.129.dtmf.type = account.129.dtmf.dtmf_payload = account.129.dtmf.info_type = account.129.100rel_enable = account.129.subscribe_register = account.129.subscribe_mwi = account.129.subscribe_mwi_expires = account.129.subscribe_mwi_to_vm = voice_mail.number.129 = %BWVOICE-PORTAL-NUMBER-129% account.129.display_mwi.enable = account.129.cid_source = account.129.cid_source_privacy = account.129.cid_source_ppi = account.129.session_timer.enable = account.129.session_timer.expires = account.129.session_timer.refresher = account.129.enable_user_equal_phone = account.129.srtp_encryption = account.129.ptime = account.129.shared_line = %BWSHAREDLINE-BINARY-129% account.129.register_mac = account.129.register_line = account.129.reg_fail_retry_interval = account.129.reg_failed_retry_min_time = account.129.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.129.conf_type =
account.129.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-129%
account.129.sip_server_type = account.129.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 621 OF 1142
########################################################################## ############# ##DECT V81 Add
account.129.register_expires_overlap = account.129.subscribe_expires_overlap = account.129.auto_dial_enable = account.129.auto_dial_num = account.129.cp_source = account.129.transfer_refer_to_contact_header.enable = #V80 Add account.129.custom_ua = account.129.callpark_enable = account.129.check_cseq.enable = account.129.check_to_tag.enable = account.129.hold_use_inactive = account.129.line_seize.expires = account.129.update_ack_while_dialing = account.129.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.129.always_fwd.enable =
account.129.always_fwd.target =
account.129.always_fwd.off_code =
account.129.always_fwd.on_code =
account.129.busy_fwd.enable =
account.129.busy_fwd.target =
account.129.busy_fwd.off_code =
account.129.busy_fwd.on_code =
account.129.timeout_fwd.enable =
account.129.timeout_fwd.target =
account.129.timeout_fwd.timeout =
account.129.timeout_fwd.off_code =
account.129.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.129.dnd.enable =
account.129.dnd.on_code =
account.129.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.129.reg.enable =
handset.129.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 622 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.129.xsi.user =%BWLOGIN-ID-129% account.129.xsi.password =%XSIPASSWORD-129% account.129.xsi.host =%XSP_ADDRESS% account.129.xsi.server_type = account.129.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.129.ldap.enable =
handset.129.ldap.name_filter=
handset.129.ldap.number_filter=
handset.129.ldap.host=
handset.129.ldap.port=
handset.129.ldap.base=
handset.129.ldap.user=
handset.129.ldap.password=
handset.129.ldap.max_hits=
handset.129.ldap.name_attr=
handset.129.ldap.numb_attr=
handset.129.ldap.display_name=
handset.129.ldap.version=
handset.129.ldap.call_in_lookup=
handset.129.ldap.ldap_sort=
handset.129.ldap.tls_mode=
handset.129.ldap.call_out_lookup=
handset.129.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account130 Settings
##
##########################################################################
#############
account.130.enable=%BWLINE-BINARY-130% account.130.label=%BWEXTENSION-130% account.130.display_name=%BWCLID-130% account.130.auth_name=%BWAUTHUSER-130% account.130.user_name=%BWLINEPORT-130% account.130.password=%BWAUTHPASSWORD-130%
#W80B ADD account.130.sip_server.template = account.130.media_transmit.enable =
account.130.alarm.template = account.130.alarm.server = account.130.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 623 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.130.sip_server.1.failback_mode =
account.130.sip_server.1.failback_timeout =
account.130.sip_server.1.register_on_enable =
account.130.sip_server.1.failback_subscribe.enable =
account.130.sip_server.1.invite_retry_counts =
account.130.sip_server.1.only_signal_with_registered =
account.130.sip_server.2.failback_mode = account.130.sip_server.2.failback_timeout = account.130.sip_server.2.register_on_enable = account.130.sip_server.2.failback_subscribe.enable = account.130.sip_server.2.invite_retry_counts = account.130.sip_server.2.only_signal_with_registered =
account.130.naptr_build = account.130.fallback.redundancy_type = account.130.fallback.timeout =
account.130.dns_cache_type = account.130.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.130.anonymous_call =
account.130.reject_anonymous_call =
account.130.send_anonymous_code =
account.130.anonymous_call_oncode =
account.130.anonymous_call_offcode =
account.130.send_anonymous_rejection_code =
account.130.anonymous_reject_oncode =
account.130.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.130.codec.g722.enable =
account.130.codec.g722.priority =
account.130.codec.g729.enable = account.130.codec.g729.priority =
account.130.codec.g726_16.enable = account.130.codec.g726_16.priority =
account.130.codec.g726_24.enable = account.130.codec.g726_24.priority =
account.130.codec.g726_32.enable = account.130.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 624 OF 1142
account.130.codec.g726_40.enable = account.130.codec.g726_40.priority =
account.130.codec.ilbc.enable = account.130.codec.ilbc.priority =
account.130.codec.pcmu.enable = account.130.codec.pcmu.priority =
account.130.codec.pcma.enable = account.130.codec.pcma.priority =
account.130.codec.opus.enable = account.130.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.130.nat.nat_traversal = account.130.nat.udp_update_enable = account.130.nat.udp_update_time = account.130.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.130.blf.subscribe_period = account.130.dtmf.type = account.130.dtmf.dtmf_payload = account.130.dtmf.info_type = account.130.100rel_enable = account.130.subscribe_register = account.130.subscribe_mwi = account.130.subscribe_mwi_expires = account.130.subscribe_mwi_to_vm = voice_mail.number.130 = %BWVOICE-PORTAL-NUMBER-130% account.130.display_mwi.enable = account.130.cid_source = account.130.cid_source_privacy = account.130.cid_source_ppi = account.130.session_timer.enable = account.130.session_timer.expires = account.130.session_timer.refresher = account.130.enable_user_equal_phone = account.130.srtp_encryption = account.130.ptime = account.130.shared_line = %BWSHAREDLINE-BINARY-130% account.130.register_mac = account.130.register_line = account.130.reg_fail_retry_interval = account.130.reg_failed_retry_min_time = account.130.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 625 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.130.conf_type =
account.130.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-130%
account.130.sip_server_type = account.130.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.130.register_expires_overlap = account.130.subscribe_expires_overlap = account.130.auto_dial_enable = account.130.auto_dial_num = account.130.cp_source = account.130.transfer_refer_to_contact_header.enable = #V80 Add account.130.custom_ua = account.130.callpark_enable = account.130.check_cseq.enable = account.130.check_to_tag.enable = account.130.hold_use_inactive = account.130.line_seize.expires = account.130.update_ack_while_dialing = account.130.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.130.always_fwd.enable =
account.130.always_fwd.target =
account.130.always_fwd.off_code =
account.130.always_fwd.on_code =
account.130.busy_fwd.enable =
account.130.busy_fwd.target =
account.130.busy_fwd.off_code =
account.130.busy_fwd.on_code =
account.130.timeout_fwd.enable =
account.130.timeout_fwd.target =
account.130.timeout_fwd.timeout =
account.130.timeout_fwd.off_code =
account.130.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 626 OF 1142
account.130.dnd.enable = account.130.dnd.on_code = account.130.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.130.reg.enable =
handset.130.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.130.xsi.user =%BWLOGIN-ID-130% account.130.xsi.password =%XSIPASSWORD-130% account.130.xsi.host =%XSP_ADDRESS% account.130.xsi.server_type = account.130.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.130.ldap.enable =
handset.130.ldap.name_filter=
handset.130.ldap.number_filter=
handset.130.ldap.host=
handset.130.ldap.port=
handset.130.ldap.base=
handset.130.ldap.user=
handset.130.ldap.password=
handset.130.ldap.max_hits=
handset.130.ldap.name_attr=
handset.130.ldap.numb_attr=
handset.130.ldap.display_name=
handset.130.ldap.version=
handset.130.ldap.call_in_lookup=
handset.130.ldap.ldap_sort=
handset.130.ldap.tls_mode=
handset.130.ldap.call_out_lookup=
handset.130.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account131 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 627 OF 1142
account.131.enable=%BWLINE-BINARY-131% account.131.label=%BWEXTENSION-131% account.131.display_name=%BWCLID-131% account.131.auth_name=%BWAUTHUSER-131% account.131.user_name=%BWLINEPORT-131% account.131.password=%BWAUTHPASSWORD-131%
#W80B ADD account.131.sip_server.template = account.131.media_transmit.enable =
account.131.alarm.template = account.131.alarm.server = account.131.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.131.sip_server.1.failback_mode =
account.131.sip_server.1.failback_timeout =
account.131.sip_server.1.register_on_enable =
account.131.sip_server.1.failback_subscribe.enable =
account.131.sip_server.1.invite_retry_counts =
account.131.sip_server.1.only_signal_with_registered =
account.131.sip_server.2.failback_mode = account.131.sip_server.2.failback_timeout = account.131.sip_server.2.register_on_enable = account.131.sip_server.2.failback_subscribe.enable = account.131.sip_server.2.invite_retry_counts = account.131.sip_server.2.only_signal_with_registered =
account.131.naptr_build = account.131.fallback.redundancy_type = account.131.fallback.timeout =
account.131.dns_cache_type = account.131.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.131.anonymous_call =
account.131.reject_anonymous_call =
account.131.send_anonymous_code =
account.131.anonymous_call_oncode =
account.131.anonymous_call_offcode =
account.131.send_anonymous_rejection_code =
account.131.anonymous_reject_oncode =
account.131.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 628 OF 1142
########################################################################## ############# account.131.codec.g722.enable = account.131.codec.g722.priority =
account.131.codec.g729.enable = account.131.codec.g729.priority =
account.131.codec.g726_16.enable = account.131.codec.g726_16.priority =
account.131.codec.g726_24.enable = account.131.codec.g726_24.priority =
account.131.codec.g726_32.enable = account.131.codec.g726_32.priority =
account.131.codec.g726_40.enable = account.131.codec.g726_40.priority =
account.131.codec.ilbc.enable = account.131.codec.ilbc.priority =
account.131.codec.pcmu.enable = account.131.codec.pcmu.priority =
account.131.codec.pcma.enable = account.131.codec.pcma.priority =
account.131.codec.opus.enable = account.131.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.131.nat.nat_traversal = account.131.nat.udp_update_enable = account.131.nat.udp_update_time = account.131.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.131.blf.subscribe_period = account.131.dtmf.type = account.131.dtmf.dtmf_payload = account.131.dtmf.info_type = account.131.100rel_enable = account.131.subscribe_register = account.131.subscribe_mwi = account.131.subscribe_mwi_expires = account.131.subscribe_mwi_to_vm = voice_mail.number.131 = %BWVOICE-PORTAL-NUMBER-131% account.131.display_mwi.enable = account.131.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 629 OF 1142
account.131.cid_source_privacy = account.131.cid_source_ppi = account.131.session_timer.enable = account.131.session_timer.expires = account.131.session_timer.refresher = account.131.enable_user_equal_phone = account.131.srtp_encryption = account.131.ptime = account.131.shared_line = %BWSHAREDLINE-BINARY-131% account.131.register_mac = account.131.register_line = account.131.reg_fail_retry_interval = account.131.reg_failed_retry_min_time = account.131.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.131.conf_type =
account.131.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-131%
account.131.sip_server_type = account.131.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.131.register_expires_overlap = account.131.subscribe_expires_overlap = account.131.auto_dial_enable = account.131.auto_dial_num = account.131.cp_source = account.131.transfer_refer_to_contact_header.enable = #V80 Add account.131.custom_ua = account.131.callpark_enable = account.131.check_cseq.enable = account.131.check_to_tag.enable = account.131.hold_use_inactive = account.131.line_seize.expires = account.131.update_ack_while_dialing = account.131.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.131.always_fwd.enable =
account.131.always_fwd.target =
account.131.always_fwd.off_code =
account.131.always_fwd.on_code =
account.131.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 630 OF 1142
account.131.busy_fwd.target = account.131.busy_fwd.off_code = account.131.busy_fwd.on_code = account.131.timeout_fwd.enable = account.131.timeout_fwd.target = account.131.timeout_fwd.timeout = account.131.timeout_fwd.off_code = account.131.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.131.dnd.enable =
account.131.dnd.on_code =
account.131.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.131.reg.enable =
handset.131.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.131.xsi.user =%BWLOGIN-ID-131% account.131.xsi.password =%XSIPASSWORD-131% account.131.xsi.host =%XSP_ADDRESS% account.131.xsi.server_type = account.131.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.131.ldap.enable =
handset.131.ldap.name_filter=
handset.131.ldap.number_filter=
handset.131.ldap.host=
handset.131.ldap.port=
handset.131.ldap.base=
handset.131.ldap.user=
handset.131.ldap.password=
handset.131.ldap.max_hits=
handset.131.ldap.name_attr=
handset.131.ldap.numb_attr=
handset.131.ldap.display_name=
handset.131.ldap.version=
handset.131.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 631 OF 1142
handset.131.ldap.ldap_sort= handset.131.ldap.tls_mode= handset.131.ldap.call_out_lookup= handset.131.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account132 Settings
##
##########################################################################
#############
account.132.enable=%BWLINE-BINARY-132% account.132.label=%BWEXTENSION-132% account.132.display_name=%BWCLID-132% account.132.auth_name=%BWAUTHUSER-132% account.132.user_name=%BWLINEPORT-132% account.132.password=%BWAUTHPASSWORD-132%
#W80B ADD account.132.sip_server.template = account.132.media_transmit.enable =
account.132.alarm.template = account.132.alarm.server = account.132.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.132.sip_server.1.failback_mode =
account.132.sip_server.1.failback_timeout =
account.132.sip_server.1.register_on_enable =
account.132.sip_server.1.failback_subscribe.enable =
account.132.sip_server.1.invite_retry_counts =
account.132.sip_server.1.only_signal_with_registered =
account.132.sip_server.2.failback_mode = account.132.sip_server.2.failback_timeout = account.132.sip_server.2.register_on_enable = account.132.sip_server.2.failback_subscribe.enable = account.132.sip_server.2.invite_retry_counts = account.132.sip_server.2.only_signal_with_registered =
account.132.naptr_build = account.132.fallback.redundancy_type = account.132.fallback.timeout =
account.132.dns_cache_type = account.132.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 632 OF 1142
account.132.anonymous_call = account.132.reject_anonymous_call = account.132.send_anonymous_code = account.132.anonymous_call_oncode = account.132.anonymous_call_offcode = account.132.send_anonymous_rejection_code = account.132.anonymous_reject_oncode = account.132.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.132.codec.g722.enable =
account.132.codec.g722.priority =
account.132.codec.g729.enable = account.132.codec.g729.priority =
account.132.codec.g726_16.enable = account.132.codec.g726_16.priority =
account.132.codec.g726_24.enable = account.132.codec.g726_24.priority =
account.132.codec.g726_32.enable = account.132.codec.g726_32.priority =
account.132.codec.g726_40.enable = account.132.codec.g726_40.priority =
account.132.codec.ilbc.enable = account.132.codec.ilbc.priority =
account.132.codec.pcmu.enable = account.132.codec.pcmu.priority =
account.132.codec.pcma.enable = account.132.codec.pcma.priority =
account.132.codec.opus.enable = account.132.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.132.nat.nat_traversal = account.132.nat.udp_update_enable = account.132.nat.udp_update_time = account.132.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 633 OF 1142
########################################################################## #############
account.132.blf.subscribe_period = account.132.dtmf.type = account.132.dtmf.dtmf_payload = account.132.dtmf.info_type = account.132.100rel_enable = account.132.subscribe_register = account.132.subscribe_mwi = account.132.subscribe_mwi_expires = account.132.subscribe_mwi_to_vm = voice_mail.number.132 = %BWVOICE-PORTAL-NUMBER-132% account.132.display_mwi.enable = account.132.cid_source = account.132.cid_source_privacy = account.132.cid_source_ppi = account.132.session_timer.enable = account.132.session_timer.expires = account.132.session_timer.refresher = account.132.enable_user_equal_phone = account.132.srtp_encryption = account.132.ptime = account.132.shared_line = %BWSHAREDLINE-BINARY-132% account.132.register_mac = account.132.register_line = account.132.reg_fail_retry_interval = account.132.reg_failed_retry_min_time = account.132.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.132.conf_type =
account.132.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-132%
account.132.sip_server_type = account.132.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.132.register_expires_overlap = account.132.subscribe_expires_overlap = account.132.auto_dial_enable = account.132.auto_dial_num = account.132.cp_source = account.132.transfer_refer_to_contact_header.enable = #V80 Add account.132.custom_ua = account.132.callpark_enable = account.132.check_cseq.enable = account.132.check_to_tag.enable = account.132.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 634 OF 1142
account.132.line_seize.expires = account.132.update_ack_while_dialing = account.132.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.132.always_fwd.enable =
account.132.always_fwd.target =
account.132.always_fwd.off_code =
account.132.always_fwd.on_code =
account.132.busy_fwd.enable =
account.132.busy_fwd.target =
account.132.busy_fwd.off_code =
account.132.busy_fwd.on_code =
account.132.timeout_fwd.enable =
account.132.timeout_fwd.target =
account.132.timeout_fwd.timeout =
account.132.timeout_fwd.off_code =
account.132.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.132.dnd.enable =
account.132.dnd.on_code =
account.132.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.132.reg.enable =
handset.132.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.132.xsi.user =%BWLOGIN-ID-132% account.132.xsi.password =%XSIPASSWORD-132% account.132.xsi.host =%XSP_ADDRESS% account.132.xsi.server_type = account.132.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 635 OF 1142
########################################################################## ############# handset.132.ldap.enable = handset.132.ldap.name_filter= handset.132.ldap.number_filter= handset.132.ldap.host= handset.132.ldap.port= handset.132.ldap.base= handset.132.ldap.user= handset.132.ldap.password= handset.132.ldap.max_hits= handset.132.ldap.name_attr= handset.132.ldap.numb_attr= handset.132.ldap.display_name= handset.132.ldap.version= handset.132.ldap.call_in_lookup= handset.132.ldap.ldap_sort= handset.132.ldap.tls_mode= handset.132.ldap.call_out_lookup= handset.132.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account133 Settings
##
##########################################################################
#############
account.133.enable=%BWLINE-BINARY-133% account.133.label=%BWEXTENSION-133% account.133.display_name=%BWCLID-133% account.133.auth_name=%BWAUTHUSER-133% account.133.user_name=%BWLINEPORT-133% account.133.password=%BWAUTHPASSWORD-133%
#W80B ADD account.133.sip_server.template = account.133.media_transmit.enable =
account.133.alarm.template = account.133.alarm.server = account.133.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.133.sip_server.1.failback_mode =
account.133.sip_server.1.failback_timeout =
account.133.sip_server.1.register_on_enable =
account.133.sip_server.1.failback_subscribe.enable =
account.133.sip_server.1.invite_retry_counts =
account.133.sip_server.1.only_signal_with_registered =
account.133.sip_server.2.failback_mode = account.133.sip_server.2.failback_timeout = account.133.sip_server.2.register_on_enable = account.133.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 636 OF 1142
account.133.sip_server.2.invite_retry_counts = account.133.sip_server.2.only_signal_with_registered =
account.133.naptr_build = account.133.fallback.redundancy_type = account.133.fallback.timeout =
account.133.dns_cache_type = account.133.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.133.anonymous_call =
account.133.reject_anonymous_call =
account.133.send_anonymous_code =
account.133.anonymous_call_oncode =
account.133.anonymous_call_offcode =
account.133.send_anonymous_rejection_code =
account.133.anonymous_reject_oncode =
account.133.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.133.codec.g722.enable =
account.133.codec.g722.priority =
account.133.codec.g729.enable = account.133.codec.g729.priority =
account.133.codec.g726_16.enable = account.133.codec.g726_16.priority =
account.133.codec.g726_24.enable = account.133.codec.g726_24.priority =
account.133.codec.g726_32.enable = account.133.codec.g726_32.priority =
account.133.codec.g726_40.enable = account.133.codec.g726_40.priority =
account.133.codec.ilbc.enable = account.133.codec.ilbc.priority =
account.133.codec.pcmu.enable = account.133.codec.pcmu.priority =
account.133.codec.pcma.enable = account.133.codec.pcma.priority =
account.133.codec.opus.enable = account.133.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 637 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.133.nat.nat_traversal = account.133.nat.udp_update_enable = account.133.nat.udp_update_time = account.133.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.133.blf.subscribe_period = account.133.dtmf.type = account.133.dtmf.dtmf_payload = account.133.dtmf.info_type = account.133.100rel_enable = account.133.subscribe_register = account.133.subscribe_mwi = account.133.subscribe_mwi_expires = account.133.subscribe_mwi_to_vm = voice_mail.number.133 = %BWVOICE-PORTAL-NUMBER-133% account.133.display_mwi.enable = account.133.cid_source = account.133.cid_source_privacy = account.133.cid_source_ppi = account.133.session_timer.enable = account.133.session_timer.expires = account.133.session_timer.refresher = account.133.enable_user_equal_phone = account.133.srtp_encryption = account.133.ptime = account.133.shared_line = %BWSHAREDLINE-BINARY-133% account.133.register_mac = account.133.register_line = account.133.reg_fail_retry_interval = account.133.reg_failed_retry_min_time = account.133.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.133.conf_type =
account.133.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-133%
account.133.sip_server_type = account.133.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 638 OF 1142
########################################################################## ############# ##DECT V81 Add
account.133.register_expires_overlap = account.133.subscribe_expires_overlap = account.133.auto_dial_enable = account.133.auto_dial_num = account.133.cp_source = account.133.transfer_refer_to_contact_header.enable = #V80 Add account.133.custom_ua = account.133.callpark_enable = account.133.check_cseq.enable = account.133.check_to_tag.enable = account.133.hold_use_inactive = account.133.line_seize.expires = account.133.update_ack_while_dialing = account.133.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.133.always_fwd.enable =
account.133.always_fwd.target =
account.133.always_fwd.off_code =
account.133.always_fwd.on_code =
account.133.busy_fwd.enable =
account.133.busy_fwd.target =
account.133.busy_fwd.off_code =
account.133.busy_fwd.on_code =
account.133.timeout_fwd.enable =
account.133.timeout_fwd.target =
account.133.timeout_fwd.timeout =
account.133.timeout_fwd.off_code =
account.133.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.133.dnd.enable =
account.133.dnd.on_code =
account.133.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.133.reg.enable =
handset.133.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 639 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.133.xsi.user =%BWLOGIN-ID-133% account.133.xsi.password =%XSIPASSWORD-133% account.133.xsi.host =%XSP_ADDRESS% account.133.xsi.server_type = account.133.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.133.ldap.enable =
handset.133.ldap.name_filter=
handset.133.ldap.number_filter=
handset.133.ldap.host=
handset.133.ldap.port=
handset.133.ldap.base=
handset.133.ldap.user=
handset.133.ldap.password=
handset.133.ldap.max_hits=
handset.133.ldap.name_attr=
handset.133.ldap.numb_attr=
handset.133.ldap.display_name=
handset.133.ldap.version=
handset.133.ldap.call_in_lookup=
handset.133.ldap.ldap_sort=
handset.133.ldap.tls_mode=
handset.133.ldap.call_out_lookup=
handset.133.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account134 Settings
##
##########################################################################
#############
account.134.enable=%BWLINE-BINARY-134% account.134.label=%BWEXTENSION-134% account.134.display_name=%BWCLID-134% account.134.auth_name=%BWAUTHUSER-134% account.134.user_name=%BWLINEPORT-134% account.134.password=%BWAUTHPASSWORD-134%
#W80B ADD account.134.sip_server.template = account.134.media_transmit.enable =
account.134.alarm.template = account.134.alarm.server = account.134.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 640 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.134.sip_server.1.failback_mode =
account.134.sip_server.1.failback_timeout =
account.134.sip_server.1.register_on_enable =
account.134.sip_server.1.failback_subscribe.enable =
account.134.sip_server.1.invite_retry_counts =
account.134.sip_server.1.only_signal_with_registered =
account.134.sip_server.2.failback_mode = account.134.sip_server.2.failback_timeout = account.134.sip_server.2.register_on_enable = account.134.sip_server.2.failback_subscribe.enable = account.134.sip_server.2.invite_retry_counts = account.134.sip_server.2.only_signal_with_registered =
account.134.naptr_build = account.134.fallback.redundancy_type = account.134.fallback.timeout =
account.134.dns_cache_type = account.134.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.134.anonymous_call =
account.134.reject_anonymous_call =
account.134.send_anonymous_code =
account.134.anonymous_call_oncode =
account.134.anonymous_call_offcode =
account.134.send_anonymous_rejection_code =
account.134.anonymous_reject_oncode =
account.134.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.134.codec.g722.enable =
account.134.codec.g722.priority =
account.134.codec.g729.enable = account.134.codec.g729.priority =
account.134.codec.g726_16.enable = account.134.codec.g726_16.priority =
account.134.codec.g726_24.enable = account.134.codec.g726_24.priority =
account.134.codec.g726_32.enable = account.134.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 641 OF 1142
account.134.codec.g726_40.enable = account.134.codec.g726_40.priority =
account.134.codec.ilbc.enable = account.134.codec.ilbc.priority =
account.134.codec.pcmu.enable = account.134.codec.pcmu.priority =
account.134.codec.pcma.enable = account.134.codec.pcma.priority =
account.134.codec.opus.enable = account.134.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.134.nat.nat_traversal = account.134.nat.udp_update_enable = account.134.nat.udp_update_time = account.134.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.134.blf.subscribe_period = account.134.dtmf.type = account.134.dtmf.dtmf_payload = account.134.dtmf.info_type = account.134.100rel_enable = account.134.subscribe_register = account.134.subscribe_mwi = account.134.subscribe_mwi_expires = account.134.subscribe_mwi_to_vm = voice_mail.number.134 = %BWVOICE-PORTAL-NUMBER-134% account.134.display_mwi.enable = account.134.cid_source = account.134.cid_source_privacy = account.134.cid_source_ppi = account.134.session_timer.enable = account.134.session_timer.expires = account.134.session_timer.refresher = account.134.enable_user_equal_phone = account.134.srtp_encryption = account.134.ptime = account.134.shared_line = %BWSHAREDLINE-BINARY-134% account.134.register_mac = account.134.register_line = account.134.reg_fail_retry_interval = account.134.reg_failed_retry_min_time = account.134.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 642 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.134.conf_type =
account.134.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-134%
account.134.sip_server_type = account.134.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.134.register_expires_overlap = account.134.subscribe_expires_overlap = account.134.auto_dial_enable = account.134.auto_dial_num = account.134.cp_source = account.134.transfer_refer_to_contact_header.enable = #V80 Add account.134.custom_ua = account.134.callpark_enable = account.134.check_cseq.enable = account.134.check_to_tag.enable = account.134.hold_use_inactive = account.134.line_seize.expires = account.134.update_ack_while_dialing = account.134.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.134.always_fwd.enable =
account.134.always_fwd.target =
account.134.always_fwd.off_code =
account.134.always_fwd.on_code =
account.134.busy_fwd.enable =
account.134.busy_fwd.target =
account.134.busy_fwd.off_code =
account.134.busy_fwd.on_code =
account.134.timeout_fwd.enable =
account.134.timeout_fwd.target =
account.134.timeout_fwd.timeout =
account.134.timeout_fwd.off_code =
account.134.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 643 OF 1142
account.134.dnd.enable = account.134.dnd.on_code = account.134.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.134.reg.enable =
handset.134.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.134.xsi.user =%BWLOGIN-ID-134% account.134.xsi.password =%XSIPASSWORD-134% account.134.xsi.host =%XSP_ADDRESS% account.134.xsi.server_type = account.134.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.134.ldap.enable =
handset.134.ldap.name_filter=
handset.134.ldap.number_filter=
handset.134.ldap.host=
handset.134.ldap.port=
handset.134.ldap.base=
handset.134.ldap.user=
handset.134.ldap.password=
handset.134.ldap.max_hits=
handset.134.ldap.name_attr=
handset.134.ldap.numb_attr=
handset.134.ldap.display_name=
handset.134.ldap.version=
handset.134.ldap.call_in_lookup=
handset.134.ldap.ldap_sort=
handset.134.ldap.tls_mode=
handset.134.ldap.call_out_lookup=
handset.134.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account135 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 644 OF 1142
account.135.enable=%BWLINE-BINARY-135% account.135.label=%BWEXTENSION-135% account.135.display_name=%BWCLID-135% account.135.auth_name=%BWAUTHUSER-135% account.135.user_name=%BWLINEPORT-135% account.135.password=%BWAUTHPASSWORD-135%
#W80B ADD account.135.sip_server.template = account.135.media_transmit.enable =
account.135.alarm.template = account.135.alarm.server = account.135.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.135.sip_server.1.failback_mode =
account.135.sip_server.1.failback_timeout =
account.135.sip_server.1.register_on_enable =
account.135.sip_server.1.failback_subscribe.enable =
account.135.sip_server.1.invite_retry_counts =
account.135.sip_server.1.only_signal_with_registered =
account.135.sip_server.2.failback_mode = account.135.sip_server.2.failback_timeout = account.135.sip_server.2.register_on_enable = account.135.sip_server.2.failback_subscribe.enable = account.135.sip_server.2.invite_retry_counts = account.135.sip_server.2.only_signal_with_registered =
account.135.naptr_build = account.135.fallback.redundancy_type = account.135.fallback.timeout =
account.135.dns_cache_type = account.135.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.135.anonymous_call =
account.135.reject_anonymous_call =
account.135.send_anonymous_code =
account.135.anonymous_call_oncode =
account.135.anonymous_call_offcode =
account.135.send_anonymous_rejection_code =
account.135.anonymous_reject_oncode =
account.135.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 645 OF 1142
########################################################################## ############# account.135.codec.g722.enable = account.135.codec.g722.priority =
account.135.codec.g729.enable = account.135.codec.g729.priority =
account.135.codec.g726_16.enable = account.135.codec.g726_16.priority =
account.135.codec.g726_24.enable = account.135.codec.g726_24.priority =
account.135.codec.g726_32.enable = account.135.codec.g726_32.priority =
account.135.codec.g726_40.enable = account.135.codec.g726_40.priority =
account.135.codec.ilbc.enable = account.135.codec.ilbc.priority =
account.135.codec.pcmu.enable = account.135.codec.pcmu.priority =
account.135.codec.pcma.enable = account.135.codec.pcma.priority =
account.135.codec.opus.enable = account.135.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.135.nat.nat_traversal = account.135.nat.udp_update_enable = account.135.nat.udp_update_time = account.135.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.135.blf.subscribe_period = account.135.dtmf.type = account.135.dtmf.dtmf_payload = account.135.dtmf.info_type = account.135.100rel_enable = account.135.subscribe_register = account.135.subscribe_mwi = account.135.subscribe_mwi_expires = account.135.subscribe_mwi_to_vm = voice_mail.number.135 = %BWVOICE-PORTAL-NUMBER-135% account.135.display_mwi.enable = account.135.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 646 OF 1142
account.135.cid_source_privacy = account.135.cid_source_ppi = account.135.session_timer.enable = account.135.session_timer.expires = account.135.session_timer.refresher = account.135.enable_user_equal_phone = account.135.srtp_encryption = account.135.ptime = account.135.shared_line = %BWSHAREDLINE-BINARY-135% account.135.register_mac = account.135.register_line = account.135.reg_fail_retry_interval = account.135.reg_failed_retry_min_time = account.135.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.135.conf_type =
account.135.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-135%
account.135.sip_server_type = account.135.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.135.register_expires_overlap = account.135.subscribe_expires_overlap = account.135.auto_dial_enable = account.135.auto_dial_num = account.135.cp_source = account.135.transfer_refer_to_contact_header.enable = #V80 Add account.135.custom_ua = account.135.callpark_enable = account.135.check_cseq.enable = account.135.check_to_tag.enable = account.135.hold_use_inactive = account.135.line_seize.expires = account.135.update_ack_while_dialing = account.135.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.135.always_fwd.enable =
account.135.always_fwd.target =
account.135.always_fwd.off_code =
account.135.always_fwd.on_code =
account.135.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 647 OF 1142
account.135.busy_fwd.target = account.135.busy_fwd.off_code = account.135.busy_fwd.on_code = account.135.timeout_fwd.enable = account.135.timeout_fwd.target = account.135.timeout_fwd.timeout = account.135.timeout_fwd.off_code = account.135.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.135.dnd.enable =
account.135.dnd.on_code =
account.135.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.135.reg.enable =
handset.135.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.135.xsi.user =%BWLOGIN-ID-135% account.135.xsi.password =%XSIPASSWORD-135% account.135.xsi.host =%XSP_ADDRESS% account.135.xsi.server_type = account.135.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.135.ldap.enable =
handset.135.ldap.name_filter=
handset.135.ldap.number_filter=
handset.135.ldap.host=
handset.135.ldap.port=
handset.135.ldap.base=
handset.135.ldap.user=
handset.135.ldap.password=
handset.135.ldap.max_hits=
handset.135.ldap.name_attr=
handset.135.ldap.numb_attr=
handset.135.ldap.display_name=
handset.135.ldap.version=
handset.135.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 648 OF 1142
handset.135.ldap.ldap_sort= handset.135.ldap.tls_mode= handset.135.ldap.call_out_lookup= handset.135.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account136 Settings
##
##########################################################################
#############
account.136.enable=%BWLINE-BINARY-136% account.136.label=%BWEXTENSION-136% account.136.display_name=%BWCLID-136% account.136.auth_name=%BWAUTHUSER-136% account.136.user_name=%BWLINEPORT-136% account.136.password=%BWAUTHPASSWORD-136%
#W80B ADD account.136.sip_server.template = account.136.media_transmit.enable =
account.136.alarm.template = account.136.alarm.server = account.136.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.136.sip_server.1.failback_mode =
account.136.sip_server.1.failback_timeout =
account.136.sip_server.1.register_on_enable =
account.136.sip_server.1.failback_subscribe.enable =
account.136.sip_server.1.invite_retry_counts =
account.136.sip_server.1.only_signal_with_registered =
account.136.sip_server.2.failback_mode = account.136.sip_server.2.failback_timeout = account.136.sip_server.2.register_on_enable = account.136.sip_server.2.failback_subscribe.enable = account.136.sip_server.2.invite_retry_counts = account.136.sip_server.2.only_signal_with_registered =
account.136.naptr_build = account.136.fallback.redundancy_type = account.136.fallback.timeout =
account.136.dns_cache_type = account.136.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 649 OF 1142
account.136.anonymous_call = account.136.reject_anonymous_call = account.136.send_anonymous_code = account.136.anonymous_call_oncode = account.136.anonymous_call_offcode = account.136.send_anonymous_rejection_code = account.136.anonymous_reject_oncode = account.136.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.136.codec.g722.enable =
account.136.codec.g722.priority =
account.136.codec.g729.enable = account.136.codec.g729.priority =
account.136.codec.g726_16.enable = account.136.codec.g726_16.priority =
account.136.codec.g726_24.enable = account.136.codec.g726_24.priority =
account.136.codec.g726_32.enable = account.136.codec.g726_32.priority =
account.136.codec.g726_40.enable = account.136.codec.g726_40.priority =
account.136.codec.ilbc.enable = account.136.codec.ilbc.priority =
account.136.codec.pcmu.enable = account.136.codec.pcmu.priority =
account.136.codec.pcma.enable = account.136.codec.pcma.priority =
account.136.codec.opus.enable = account.136.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.136.nat.nat_traversal = account.136.nat.udp_update_enable = account.136.nat.udp_update_time = account.136.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 650 OF 1142
########################################################################## #############
account.136.blf.subscribe_period = account.136.dtmf.type = account.136.dtmf.dtmf_payload = account.136.dtmf.info_type = account.136.100rel_enable = account.136.subscribe_register = account.136.subscribe_mwi = account.136.subscribe_mwi_expires = account.136.subscribe_mwi_to_vm = voice_mail.number.136 = %BWVOICE-PORTAL-NUMBER-136% account.136.display_mwi.enable = account.136.cid_source = account.136.cid_source_privacy = account.136.cid_source_ppi = account.136.session_timer.enable = account.136.session_timer.expires = account.136.session_timer.refresher = account.136.enable_user_equal_phone = account.136.srtp_encryption = account.136.ptime = account.136.shared_line = %BWSHAREDLINE-BINARY-136% account.136.register_mac = account.136.register_line = account.136.reg_fail_retry_interval = account.136.reg_failed_retry_min_time = account.136.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.136.conf_type =
account.136.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-136%
account.136.sip_server_type = account.136.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.136.register_expires_overlap = account.136.subscribe_expires_overlap = account.136.auto_dial_enable = account.136.auto_dial_num = account.136.cp_source = account.136.transfer_refer_to_contact_header.enable = #V80 Add account.136.custom_ua = account.136.callpark_enable = account.136.check_cseq.enable = account.136.check_to_tag.enable = account.136.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 651 OF 1142
account.136.line_seize.expires = account.136.update_ack_while_dialing = account.136.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.136.always_fwd.enable =
account.136.always_fwd.target =
account.136.always_fwd.off_code =
account.136.always_fwd.on_code =
account.136.busy_fwd.enable =
account.136.busy_fwd.target =
account.136.busy_fwd.off_code =
account.136.busy_fwd.on_code =
account.136.timeout_fwd.enable =
account.136.timeout_fwd.target =
account.136.timeout_fwd.timeout =
account.136.timeout_fwd.off_code =
account.136.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.136.dnd.enable =
account.136.dnd.on_code =
account.136.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.136.reg.enable =
handset.136.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.136.xsi.user =%BWLOGIN-ID-136% account.136.xsi.password =%XSIPASSWORD-136% account.136.xsi.host =%XSP_ADDRESS% account.136.xsi.server_type = account.136.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 652 OF 1142
########################################################################## ############# handset.136.ldap.enable = handset.136.ldap.name_filter= handset.136.ldap.number_filter= handset.136.ldap.host= handset.136.ldap.port= handset.136.ldap.base= handset.136.ldap.user= handset.136.ldap.password= handset.136.ldap.max_hits= handset.136.ldap.name_attr= handset.136.ldap.numb_attr= handset.136.ldap.display_name= handset.136.ldap.version= handset.136.ldap.call_in_lookup= handset.136.ldap.ldap_sort= handset.136.ldap.tls_mode= handset.136.ldap.call_out_lookup= handset.136.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account137 Settings
##
##########################################################################
#############
account.137.enable=%BWLINE-BINARY-137% account.137.label=%BWEXTENSION-137% account.137.display_name=%BWCLID-137% account.137.auth_name=%BWAUTHUSER-137% account.137.user_name=%BWLINEPORT-137% account.137.password=%BWAUTHPASSWORD-137%
#W80B ADD account.137.sip_server.template = account.137.media_transmit.enable =
account.137.alarm.template = account.137.alarm.server = account.137.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.137.sip_server.1.failback_mode =
account.137.sip_server.1.failback_timeout =
account.137.sip_server.1.register_on_enable =
account.137.sip_server.1.failback_subscribe.enable =
account.137.sip_server.1.invite_retry_counts =
account.137.sip_server.1.only_signal_with_registered =
account.137.sip_server.2.failback_mode = account.137.sip_server.2.failback_timeout = account.137.sip_server.2.register_on_enable = account.137.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 653 OF 1142
account.137.sip_server.2.invite_retry_counts = account.137.sip_server.2.only_signal_with_registered =
account.137.naptr_build = account.137.fallback.redundancy_type = account.137.fallback.timeout =
account.137.dns_cache_type = account.137.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.137.anonymous_call =
account.137.reject_anonymous_call =
account.137.send_anonymous_code =
account.137.anonymous_call_oncode =
account.137.anonymous_call_offcode =
account.137.send_anonymous_rejection_code =
account.137.anonymous_reject_oncode =
account.137.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.137.codec.g722.enable =
account.137.codec.g722.priority =
account.137.codec.g729.enable = account.137.codec.g729.priority =
account.137.codec.g726_16.enable = account.137.codec.g726_16.priority =
account.137.codec.g726_24.enable = account.137.codec.g726_24.priority =
account.137.codec.g726_32.enable = account.137.codec.g726_32.priority =
account.137.codec.g726_40.enable = account.137.codec.g726_40.priority =
account.137.codec.ilbc.enable = account.137.codec.ilbc.priority =
account.137.codec.pcmu.enable = account.137.codec.pcmu.priority =
account.137.codec.pcma.enable = account.137.codec.pcma.priority =
account.137.codec.opus.enable = account.137.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 654 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.137.nat.nat_traversal = account.137.nat.udp_update_enable = account.137.nat.udp_update_time = account.137.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.137.blf.subscribe_period = account.137.dtmf.type = account.137.dtmf.dtmf_payload = account.137.dtmf.info_type = account.137.100rel_enable = account.137.subscribe_register = account.137.subscribe_mwi = account.137.subscribe_mwi_expires = account.137.subscribe_mwi_to_vm = voice_mail.number.137 = %BWVOICE-PORTAL-NUMBER-137% account.137.display_mwi.enable = account.137.cid_source = account.137.cid_source_privacy = account.137.cid_source_ppi = account.137.session_timer.enable = account.137.session_timer.expires = account.137.session_timer.refresher = account.137.enable_user_equal_phone = account.137.srtp_encryption = account.137.ptime = account.137.shared_line = %BWSHAREDLINE-BINARY-137% account.137.register_mac = account.137.register_line = account.137.reg_fail_retry_interval = account.137.reg_failed_retry_min_time = account.137.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.137.conf_type =
account.137.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-137%
account.137.sip_server_type = account.137.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 655 OF 1142
########################################################################## ############# ##DECT V81 Add
account.137.register_expires_overlap = account.137.subscribe_expires_overlap = account.137.auto_dial_enable = account.137.auto_dial_num = account.137.cp_source = account.137.transfer_refer_to_contact_header.enable = #V80 Add account.137.custom_ua = account.137.callpark_enable = account.137.check_cseq.enable = account.137.check_to_tag.enable = account.137.hold_use_inactive = account.137.line_seize.expires = account.137.update_ack_while_dialing = account.137.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.137.always_fwd.enable =
account.137.always_fwd.target =
account.137.always_fwd.off_code =
account.137.always_fwd.on_code =
account.137.busy_fwd.enable =
account.137.busy_fwd.target =
account.137.busy_fwd.off_code =
account.137.busy_fwd.on_code =
account.137.timeout_fwd.enable =
account.137.timeout_fwd.target =
account.137.timeout_fwd.timeout =
account.137.timeout_fwd.off_code =
account.137.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.137.dnd.enable =
account.137.dnd.on_code =
account.137.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.137.reg.enable =
handset.137.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 656 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.137.xsi.user =%BWLOGIN-ID-137% account.137.xsi.password =%XSIPASSWORD-137% account.137.xsi.host =%XSP_ADDRESS% account.137.xsi.server_type = account.137.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.137.ldap.enable =
handset.137.ldap.name_filter=
handset.137.ldap.number_filter=
handset.137.ldap.host=
handset.137.ldap.port=
handset.137.ldap.base=
handset.137.ldap.user=
handset.137.ldap.password=
handset.137.ldap.max_hits=
handset.137.ldap.name_attr=
handset.137.ldap.numb_attr=
handset.137.ldap.display_name=
handset.137.ldap.version=
handset.137.ldap.call_in_lookup=
handset.137.ldap.ldap_sort=
handset.137.ldap.tls_mode=
handset.137.ldap.call_out_lookup=
handset.137.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account138 Settings
##
##########################################################################
#############
account.138.enable=%BWLINE-BINARY-138% account.138.label=%BWEXTENSION-138% account.138.display_name=%BWCLID-138% account.138.auth_name=%BWAUTHUSER-138% account.138.user_name=%BWLINEPORT-138% account.138.password=%BWAUTHPASSWORD-138%
#W80B ADD account.138.sip_server.template = account.138.media_transmit.enable =
account.138.alarm.template = account.138.alarm.server = account.138.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 657 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.138.sip_server.1.failback_mode =
account.138.sip_server.1.failback_timeout =
account.138.sip_server.1.register_on_enable =
account.138.sip_server.1.failback_subscribe.enable =
account.138.sip_server.1.invite_retry_counts =
account.138.sip_server.1.only_signal_with_registered =
account.138.sip_server.2.failback_mode = account.138.sip_server.2.failback_timeout = account.138.sip_server.2.register_on_enable = account.138.sip_server.2.failback_subscribe.enable = account.138.sip_server.2.invite_retry_counts = account.138.sip_server.2.only_signal_with_registered =
account.138.naptr_build = account.138.fallback.redundancy_type = account.138.fallback.timeout =
account.138.dns_cache_type = account.138.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.138.anonymous_call =
account.138.reject_anonymous_call =
account.138.send_anonymous_code =
account.138.anonymous_call_oncode =
account.138.anonymous_call_offcode =
account.138.send_anonymous_rejection_code =
account.138.anonymous_reject_oncode =
account.138.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.138.codec.g722.enable =
account.138.codec.g722.priority =
account.138.codec.g729.enable = account.138.codec.g729.priority =
account.138.codec.g726_16.enable = account.138.codec.g726_16.priority =
account.138.codec.g726_24.enable = account.138.codec.g726_24.priority =
account.138.codec.g726_32.enable = account.138.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 658 OF 1142
account.138.codec.g726_40.enable = account.138.codec.g726_40.priority =
account.138.codec.ilbc.enable = account.138.codec.ilbc.priority =
account.138.codec.pcmu.enable = account.138.codec.pcmu.priority =
account.138.codec.pcma.enable = account.138.codec.pcma.priority =
account.138.codec.opus.enable = account.138.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.138.nat.nat_traversal = account.138.nat.udp_update_enable = account.138.nat.udp_update_time = account.138.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.138.blf.subscribe_period = account.138.dtmf.type = account.138.dtmf.dtmf_payload = account.138.dtmf.info_type = account.138.100rel_enable = account.138.subscribe_register = account.138.subscribe_mwi = account.138.subscribe_mwi_expires = account.138.subscribe_mwi_to_vm = voice_mail.number.138 = %BWVOICE-PORTAL-NUMBER-138% account.138.display_mwi.enable = account.138.cid_source = account.138.cid_source_privacy = account.138.cid_source_ppi = account.138.session_timer.enable = account.138.session_timer.expires = account.138.session_timer.refresher = account.138.enable_user_equal_phone = account.138.srtp_encryption = account.138.ptime = account.138.shared_line = %BWSHAREDLINE-BINARY-138% account.138.register_mac = account.138.register_line = account.138.reg_fail_retry_interval = account.138.reg_failed_retry_min_time = account.138.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 659 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.138.conf_type =
account.138.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-138%
account.138.sip_server_type = account.138.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.138.register_expires_overlap = account.138.subscribe_expires_overlap = account.138.auto_dial_enable = account.138.auto_dial_num = account.138.cp_source = account.138.transfer_refer_to_contact_header.enable = #V80 Add account.138.custom_ua = account.138.callpark_enable = account.138.check_cseq.enable = account.138.check_to_tag.enable = account.138.hold_use_inactive = account.138.line_seize.expires = account.138.update_ack_while_dialing = account.138.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.138.always_fwd.enable =
account.138.always_fwd.target =
account.138.always_fwd.off_code =
account.138.always_fwd.on_code =
account.138.busy_fwd.enable =
account.138.busy_fwd.target =
account.138.busy_fwd.off_code =
account.138.busy_fwd.on_code =
account.138.timeout_fwd.enable =
account.138.timeout_fwd.target =
account.138.timeout_fwd.timeout =
account.138.timeout_fwd.off_code =
account.138.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 660 OF 1142
account.138.dnd.enable = account.138.dnd.on_code = account.138.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.138.reg.enable =
handset.138.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.138.xsi.user =%BWLOGIN-ID-138% account.138.xsi.password =%XSIPASSWORD-138% account.138.xsi.host =%XSP_ADDRESS% account.138.xsi.server_type = account.138.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.138.ldap.enable =
handset.138.ldap.name_filter=
handset.138.ldap.number_filter=
handset.138.ldap.host=
handset.138.ldap.port=
handset.138.ldap.base=
handset.138.ldap.user=
handset.138.ldap.password=
handset.138.ldap.max_hits=
handset.138.ldap.name_attr=
handset.138.ldap.numb_attr=
handset.138.ldap.display_name=
handset.138.ldap.version=
handset.138.ldap.call_in_lookup=
handset.138.ldap.ldap_sort=
handset.138.ldap.tls_mode=
handset.138.ldap.call_out_lookup=
handset.138.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account139 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 661 OF 1142
account.139.enable=%BWLINE-BINARY-139% account.139.label=%BWEXTENSION-139% account.139.display_name=%BWCLID-139% account.139.auth_name=%BWAUTHUSER-139% account.139.user_name=%BWLINEPORT-139% account.139.password=%BWAUTHPASSWORD-139%
#W80B ADD account.139.sip_server.template = account.139.media_transmit.enable =
account.139.alarm.template = account.139.alarm.server = account.139.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.139.sip_server.1.failback_mode =
account.139.sip_server.1.failback_timeout =
account.139.sip_server.1.register_on_enable =
account.139.sip_server.1.failback_subscribe.enable =
account.139.sip_server.1.invite_retry_counts =
account.139.sip_server.1.only_signal_with_registered =
account.139.sip_server.2.failback_mode = account.139.sip_server.2.failback_timeout = account.139.sip_server.2.register_on_enable = account.139.sip_server.2.failback_subscribe.enable = account.139.sip_server.2.invite_retry_counts = account.139.sip_server.2.only_signal_with_registered =
account.139.naptr_build = account.139.fallback.redundancy_type = account.139.fallback.timeout =
account.139.dns_cache_type = account.139.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.139.anonymous_call =
account.139.reject_anonymous_call =
account.139.send_anonymous_code =
account.139.anonymous_call_oncode =
account.139.anonymous_call_offcode =
account.139.send_anonymous_rejection_code =
account.139.anonymous_reject_oncode =
account.139.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 662 OF 1142
########################################################################## ############# account.139.codec.g722.enable = account.139.codec.g722.priority =
account.139.codec.g729.enable = account.139.codec.g729.priority =
account.139.codec.g726_16.enable = account.139.codec.g726_16.priority =
account.139.codec.g726_24.enable = account.139.codec.g726_24.priority =
account.139.codec.g726_32.enable = account.139.codec.g726_32.priority =
account.139.codec.g726_40.enable = account.139.codec.g726_40.priority =
account.139.codec.ilbc.enable = account.139.codec.ilbc.priority =
account.139.codec.pcmu.enable = account.139.codec.pcmu.priority =
account.139.codec.pcma.enable = account.139.codec.pcma.priority =
account.139.codec.opus.enable = account.139.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.139.nat.nat_traversal = account.139.nat.udp_update_enable = account.139.nat.udp_update_time = account.139.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.139.blf.subscribe_period = account.139.dtmf.type = account.139.dtmf.dtmf_payload = account.139.dtmf.info_type = account.139.100rel_enable = account.139.subscribe_register = account.139.subscribe_mwi = account.139.subscribe_mwi_expires = account.139.subscribe_mwi_to_vm = voice_mail.number.139 = %BWVOICE-PORTAL-NUMBER-139% account.139.display_mwi.enable = account.139.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 663 OF 1142
account.139.cid_source_privacy = account.139.cid_source_ppi = account.139.session_timer.enable = account.139.session_timer.expires = account.139.session_timer.refresher = account.139.enable_user_equal_phone = account.139.srtp_encryption = account.139.ptime = account.139.shared_line = %BWSHAREDLINE-BINARY-139% account.139.register_mac = account.139.register_line = account.139.reg_fail_retry_interval = account.139.reg_failed_retry_min_time = account.139.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.139.conf_type =
account.139.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-139%
account.139.sip_server_type = account.139.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.139.register_expires_overlap = account.139.subscribe_expires_overlap = account.139.auto_dial_enable = account.139.auto_dial_num = account.139.cp_source = account.139.transfer_refer_to_contact_header.enable = #V80 Add account.139.custom_ua = account.139.callpark_enable = account.139.check_cseq.enable = account.139.check_to_tag.enable = account.139.hold_use_inactive = account.139.line_seize.expires = account.139.update_ack_while_dialing = account.139.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.139.always_fwd.enable =
account.139.always_fwd.target =
account.139.always_fwd.off_code =
account.139.always_fwd.on_code =
account.139.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 664 OF 1142
account.139.busy_fwd.target = account.139.busy_fwd.off_code = account.139.busy_fwd.on_code = account.139.timeout_fwd.enable = account.139.timeout_fwd.target = account.139.timeout_fwd.timeout = account.139.timeout_fwd.off_code = account.139.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.139.dnd.enable =
account.139.dnd.on_code =
account.139.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.139.reg.enable =
handset.139.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.139.xsi.user =%BWLOGIN-ID-139% account.139.xsi.password =%XSIPASSWORD-139% account.139.xsi.host =%XSP_ADDRESS% account.139.xsi.server_type = account.139.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.139.ldap.enable =
handset.139.ldap.name_filter=
handset.139.ldap.number_filter=
handset.139.ldap.host=
handset.139.ldap.port=
handset.139.ldap.base=
handset.139.ldap.user=
handset.139.ldap.password=
handset.139.ldap.max_hits=
handset.139.ldap.name_attr=
handset.139.ldap.numb_attr=
handset.139.ldap.display_name=
handset.139.ldap.version=
handset.139.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 665 OF 1142
handset.139.ldap.ldap_sort= handset.139.ldap.tls_mode= handset.139.ldap.call_out_lookup= handset.139.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account140 Settings
##
##########################################################################
#############
account.140.enable=%BWLINE-BINARY-140% account.140.label=%BWEXTENSION-140% account.140.display_name=%BWCLID-140% account.140.auth_name=%BWAUTHUSER-140% account.140.user_name=%BWLINEPORT-140% account.140.password=%BWAUTHPASSWORD-140%
#W80B ADD account.140.sip_server.template = account.140.media_transmit.enable =
account.140.alarm.template = account.140.alarm.server = account.140.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.140.sip_server.1.failback_mode =
account.140.sip_server.1.failback_timeout =
account.140.sip_server.1.register_on_enable =
account.140.sip_server.1.failback_subscribe.enable =
account.140.sip_server.1.invite_retry_counts =
account.140.sip_server.1.only_signal_with_registered =
account.140.sip_server.2.failback_mode = account.140.sip_server.2.failback_timeout = account.140.sip_server.2.register_on_enable = account.140.sip_server.2.failback_subscribe.enable = account.140.sip_server.2.invite_retry_counts = account.140.sip_server.2.only_signal_with_registered =
account.140.naptr_build = account.140.fallback.redundancy_type = account.140.fallback.timeout =
account.140.dns_cache_type = account.140.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 666 OF 1142
account.140.anonymous_call = account.140.reject_anonymous_call = account.140.send_anonymous_code = account.140.anonymous_call_oncode = account.140.anonymous_call_offcode = account.140.send_anonymous_rejection_code = account.140.anonymous_reject_oncode = account.140.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.140.codec.g722.enable =
account.140.codec.g722.priority =
account.140.codec.g729.enable = account.140.codec.g729.priority =
account.140.codec.g726_16.enable = account.140.codec.g726_16.priority =
account.140.codec.g726_24.enable = account.140.codec.g726_24.priority =
account.140.codec.g726_32.enable = account.140.codec.g726_32.priority =
account.140.codec.g726_40.enable = account.140.codec.g726_40.priority =
account.140.codec.ilbc.enable = account.140.codec.ilbc.priority =
account.140.codec.pcmu.enable = account.140.codec.pcmu.priority =
account.140.codec.pcma.enable = account.140.codec.pcma.priority =
account.140.codec.opus.enable = account.140.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.140.nat.nat_traversal = account.140.nat.udp_update_enable = account.140.nat.udp_update_time = account.140.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 667 OF 1142
########################################################################## #############
account.140.blf.subscribe_period = account.140.dtmf.type = account.140.dtmf.dtmf_payload = account.140.dtmf.info_type = account.140.100rel_enable = account.140.subscribe_register = account.140.subscribe_mwi = account.140.subscribe_mwi_expires = account.140.subscribe_mwi_to_vm = voice_mail.number.140 = %BWVOICE-PORTAL-NUMBER-140% account.140.display_mwi.enable = account.140.cid_source = account.140.cid_source_privacy = account.140.cid_source_ppi = account.140.session_timer.enable = account.140.session_timer.expires = account.140.session_timer.refresher = account.140.enable_user_equal_phone = account.140.srtp_encryption = account.140.ptime = account.140.shared_line = %BWSHAREDLINE-BINARY-140% account.140.register_mac = account.140.register_line = account.140.reg_fail_retry_interval = account.140.reg_failed_retry_min_time = account.140.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.140.conf_type =
account.140.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-140%
account.140.sip_server_type = account.140.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.140.register_expires_overlap = account.140.subscribe_expires_overlap = account.140.auto_dial_enable = account.140.auto_dial_num = account.140.cp_source = account.140.transfer_refer_to_contact_header.enable = #V80 Add account.140.custom_ua = account.140.callpark_enable = account.140.check_cseq.enable = account.140.check_to_tag.enable = account.140.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 668 OF 1142
account.140.line_seize.expires = account.140.update_ack_while_dialing = account.140.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.140.always_fwd.enable =
account.140.always_fwd.target =
account.140.always_fwd.off_code =
account.140.always_fwd.on_code =
account.140.busy_fwd.enable =
account.140.busy_fwd.target =
account.140.busy_fwd.off_code =
account.140.busy_fwd.on_code =
account.140.timeout_fwd.enable =
account.140.timeout_fwd.target =
account.140.timeout_fwd.timeout =
account.140.timeout_fwd.off_code =
account.140.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.140.dnd.enable =
account.140.dnd.on_code =
account.140.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.140.reg.enable =
handset.140.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.140.xsi.user =%BWLOGIN-ID-140% account.140.xsi.password =%XSIPASSWORD-140% account.140.xsi.host =%XSP_ADDRESS% account.140.xsi.server_type = account.140.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 669 OF 1142
########################################################################## ############# handset.140.ldap.enable = handset.140.ldap.name_filter= handset.140.ldap.number_filter= handset.140.ldap.host= handset.140.ldap.port= handset.140.ldap.base= handset.140.ldap.user= handset.140.ldap.password= handset.140.ldap.max_hits= handset.140.ldap.name_attr= handset.140.ldap.numb_attr= handset.140.ldap.display_name= handset.140.ldap.version= handset.140.ldap.call_in_lookup= handset.140.ldap.ldap_sort= handset.140.ldap.tls_mode= handset.140.ldap.call_out_lookup= handset.140.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account141 Settings
##
##########################################################################
#############
account.141.enable=%BWLINE-BINARY-141% account.141.label=%BWEXTENSION-141% account.141.display_name=%BWCLID-141% account.141.auth_name=%BWAUTHUSER-141% account.141.user_name=%BWLINEPORT-141% account.141.password=%BWAUTHPASSWORD-141%
#W80B ADD account.141.sip_server.template = account.141.media_transmit.enable =
account.141.alarm.template = account.141.alarm.server = account.141.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.141.sip_server.1.failback_mode =
account.141.sip_server.1.failback_timeout =
account.141.sip_server.1.register_on_enable =
account.141.sip_server.1.failback_subscribe.enable =
account.141.sip_server.1.invite_retry_counts =
account.141.sip_server.1.only_signal_with_registered =
account.141.sip_server.2.failback_mode = account.141.sip_server.2.failback_timeout = account.141.sip_server.2.register_on_enable = account.141.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 670 OF 1142
account.141.sip_server.2.invite_retry_counts = account.141.sip_server.2.only_signal_with_registered =
account.141.naptr_build = account.141.fallback.redundancy_type = account.141.fallback.timeout =
account.141.dns_cache_type = account.141.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.141.anonymous_call =
account.141.reject_anonymous_call =
account.141.send_anonymous_code =
account.141.anonymous_call_oncode =
account.141.anonymous_call_offcode =
account.141.send_anonymous_rejection_code =
account.141.anonymous_reject_oncode =
account.141.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.141.codec.g722.enable =
account.141.codec.g722.priority =
account.141.codec.g729.enable = account.141.codec.g729.priority =
account.141.codec.g726_16.enable = account.141.codec.g726_16.priority =
account.141.codec.g726_24.enable = account.141.codec.g726_24.priority =
account.141.codec.g726_32.enable = account.141.codec.g726_32.priority =
account.141.codec.g726_40.enable = account.141.codec.g726_40.priority =
account.141.codec.ilbc.enable = account.141.codec.ilbc.priority =
account.141.codec.pcmu.enable = account.141.codec.pcmu.priority =
account.141.codec.pcma.enable = account.141.codec.pcma.priority =
account.141.codec.opus.enable = account.141.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 671 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.141.nat.nat_traversal = account.141.nat.udp_update_enable = account.141.nat.udp_update_time = account.141.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.141.blf.subscribe_period = account.141.dtmf.type = account.141.dtmf.dtmf_payload = account.141.dtmf.info_type = account.141.100rel_enable = account.141.subscribe_register = account.141.subscribe_mwi = account.141.subscribe_mwi_expires = account.141.subscribe_mwi_to_vm = voice_mail.number.141 = %BWVOICE-PORTAL-NUMBER-141% account.141.display_mwi.enable = account.141.cid_source = account.141.cid_source_privacy = account.141.cid_source_ppi = account.141.session_timer.enable = account.141.session_timer.expires = account.141.session_timer.refresher = account.141.enable_user_equal_phone = account.141.srtp_encryption = account.141.ptime = account.141.shared_line = %BWSHAREDLINE-BINARY-141% account.141.register_mac = account.141.register_line = account.141.reg_fail_retry_interval = account.141.reg_failed_retry_min_time = account.141.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.141.conf_type =
account.141.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-141%
account.141.sip_server_type = account.141.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 672 OF 1142
########################################################################## ############# ##DECT V81 Add
account.141.register_expires_overlap = account.141.subscribe_expires_overlap = account.141.auto_dial_enable = account.141.auto_dial_num = account.141.cp_source = account.141.transfer_refer_to_contact_header.enable = #V80 Add account.141.custom_ua = account.141.callpark_enable = account.141.check_cseq.enable = account.141.check_to_tag.enable = account.141.hold_use_inactive = account.141.line_seize.expires = account.141.update_ack_while_dialing = account.141.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.141.always_fwd.enable =
account.141.always_fwd.target =
account.141.always_fwd.off_code =
account.141.always_fwd.on_code =
account.141.busy_fwd.enable =
account.141.busy_fwd.target =
account.141.busy_fwd.off_code =
account.141.busy_fwd.on_code =
account.141.timeout_fwd.enable =
account.141.timeout_fwd.target =
account.141.timeout_fwd.timeout =
account.141.timeout_fwd.off_code =
account.141.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.141.dnd.enable =
account.141.dnd.on_code =
account.141.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.141.reg.enable =
handset.141.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 673 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.141.xsi.user =%BWLOGIN-ID-141% account.141.xsi.password =%XSIPASSWORD-141% account.141.xsi.host =%XSP_ADDRESS% account.141.xsi.server_type = account.141.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.141.ldap.enable =
handset.141.ldap.name_filter=
handset.141.ldap.number_filter=
handset.141.ldap.host=
handset.141.ldap.port=
handset.141.ldap.base=
handset.141.ldap.user=
handset.141.ldap.password=
handset.141.ldap.max_hits=
handset.141.ldap.name_attr=
handset.141.ldap.numb_attr=
handset.141.ldap.display_name=
handset.141.ldap.version=
handset.141.ldap.call_in_lookup=
handset.141.ldap.ldap_sort=
handset.141.ldap.tls_mode=
handset.141.ldap.call_out_lookup=
handset.141.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account142 Settings
##
##########################################################################
#############
account.142.enable=%BWLINE-BINARY-142% account.142.label=%BWEXTENSION-142% account.142.display_name=%BWCLID-142% account.142.auth_name=%BWAUTHUSER-142% account.142.user_name=%BWLINEPORT-142% account.142.password=%BWAUTHPASSWORD-142%
#W80B ADD account.142.sip_server.template = account.142.media_transmit.enable =
account.142.alarm.template = account.142.alarm.server = account.142.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 674 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.142.sip_server.1.failback_mode =
account.142.sip_server.1.failback_timeout =
account.142.sip_server.1.register_on_enable =
account.142.sip_server.1.failback_subscribe.enable =
account.142.sip_server.1.invite_retry_counts =
account.142.sip_server.1.only_signal_with_registered =
account.142.sip_server.2.failback_mode = account.142.sip_server.2.failback_timeout = account.142.sip_server.2.register_on_enable = account.142.sip_server.2.failback_subscribe.enable = account.142.sip_server.2.invite_retry_counts = account.142.sip_server.2.only_signal_with_registered =
account.142.naptr_build = account.142.fallback.redundancy_type = account.142.fallback.timeout =
account.142.dns_cache_type = account.142.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.142.anonymous_call =
account.142.reject_anonymous_call =
account.142.send_anonymous_code =
account.142.anonymous_call_oncode =
account.142.anonymous_call_offcode =
account.142.send_anonymous_rejection_code =
account.142.anonymous_reject_oncode =
account.142.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.142.codec.g722.enable =
account.142.codec.g722.priority =
account.142.codec.g729.enable = account.142.codec.g729.priority =
account.142.codec.g726_16.enable = account.142.codec.g726_16.priority =
account.142.codec.g726_24.enable = account.142.codec.g726_24.priority =
account.142.codec.g726_32.enable = account.142.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 675 OF 1142
account.142.codec.g726_40.enable = account.142.codec.g726_40.priority =
account.142.codec.ilbc.enable = account.142.codec.ilbc.priority =
account.142.codec.pcmu.enable = account.142.codec.pcmu.priority =
account.142.codec.pcma.enable = account.142.codec.pcma.priority =
account.142.codec.opus.enable = account.142.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.142.nat.nat_traversal = account.142.nat.udp_update_enable = account.142.nat.udp_update_time = account.142.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.142.blf.subscribe_period = account.142.dtmf.type = account.142.dtmf.dtmf_payload = account.142.dtmf.info_type = account.142.100rel_enable = account.142.subscribe_register = account.142.subscribe_mwi = account.142.subscribe_mwi_expires = account.142.subscribe_mwi_to_vm = voice_mail.number.142 = %BWVOICE-PORTAL-NUMBER-142% account.142.display_mwi.enable = account.142.cid_source = account.142.cid_source_privacy = account.142.cid_source_ppi = account.142.session_timer.enable = account.142.session_timer.expires = account.142.session_timer.refresher = account.142.enable_user_equal_phone = account.142.srtp_encryption = account.142.ptime = account.142.shared_line = %BWSHAREDLINE-BINARY-142% account.142.register_mac = account.142.register_line = account.142.reg_fail_retry_interval = account.142.reg_failed_retry_min_time = account.142.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 676 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.142.conf_type =
account.142.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-142%
account.142.sip_server_type = account.142.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.142.register_expires_overlap = account.142.subscribe_expires_overlap = account.142.auto_dial_enable = account.142.auto_dial_num = account.142.cp_source = account.142.transfer_refer_to_contact_header.enable = #V80 Add account.142.custom_ua = account.142.callpark_enable = account.142.check_cseq.enable = account.142.check_to_tag.enable = account.142.hold_use_inactive = account.142.line_seize.expires = account.142.update_ack_while_dialing = account.142.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.142.always_fwd.enable =
account.142.always_fwd.target =
account.142.always_fwd.off_code =
account.142.always_fwd.on_code =
account.142.busy_fwd.enable =
account.142.busy_fwd.target =
account.142.busy_fwd.off_code =
account.142.busy_fwd.on_code =
account.142.timeout_fwd.enable =
account.142.timeout_fwd.target =
account.142.timeout_fwd.timeout =
account.142.timeout_fwd.off_code =
account.142.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 677 OF 1142
account.142.dnd.enable = account.142.dnd.on_code = account.142.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.142.reg.enable =
handset.142.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.142.xsi.user =%BWLOGIN-ID-142% account.142.xsi.password =%XSIPASSWORD-142% account.142.xsi.host =%XSP_ADDRESS% account.142.xsi.server_type = account.142.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.142.ldap.enable =
handset.142.ldap.name_filter=
handset.142.ldap.number_filter=
handset.142.ldap.host=
handset.142.ldap.port=
handset.142.ldap.base=
handset.142.ldap.user=
handset.142.ldap.password=
handset.142.ldap.max_hits=
handset.142.ldap.name_attr=
handset.142.ldap.numb_attr=
handset.142.ldap.display_name=
handset.142.ldap.version=
handset.142.ldap.call_in_lookup=
handset.142.ldap.ldap_sort=
handset.142.ldap.tls_mode=
handset.142.ldap.call_out_lookup=
handset.142.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account143 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 678 OF 1142
account.143.enable=%BWLINE-BINARY-143% account.143.label=%BWEXTENSION-143% account.143.display_name=%BWCLID-143% account.143.auth_name=%BWAUTHUSER-143% account.143.user_name=%BWLINEPORT-143% account.143.password=%BWAUTHPASSWORD-143%
#W80B ADD account.143.sip_server.template = account.143.media_transmit.enable =
account.143.alarm.template = account.143.alarm.server = account.143.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.143.sip_server.1.failback_mode =
account.143.sip_server.1.failback_timeout =
account.143.sip_server.1.register_on_enable =
account.143.sip_server.1.failback_subscribe.enable =
account.143.sip_server.1.invite_retry_counts =
account.143.sip_server.1.only_signal_with_registered =
account.143.sip_server.2.failback_mode = account.143.sip_server.2.failback_timeout = account.143.sip_server.2.register_on_enable = account.143.sip_server.2.failback_subscribe.enable = account.143.sip_server.2.invite_retry_counts = account.143.sip_server.2.only_signal_with_registered =
account.143.naptr_build = account.143.fallback.redundancy_type = account.143.fallback.timeout =
account.143.dns_cache_type = account.143.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.143.anonymous_call =
account.143.reject_anonymous_call =
account.143.send_anonymous_code =
account.143.anonymous_call_oncode =
account.143.anonymous_call_offcode =
account.143.send_anonymous_rejection_code =
account.143.anonymous_reject_oncode =
account.143.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 679 OF 1142
########################################################################## ############# account.143.codec.g722.enable = account.143.codec.g722.priority =
account.143.codec.g729.enable = account.143.codec.g729.priority =
account.143.codec.g726_16.enable = account.143.codec.g726_16.priority =
account.143.codec.g726_24.enable = account.143.codec.g726_24.priority =
account.143.codec.g726_32.enable = account.143.codec.g726_32.priority =
account.143.codec.g726_40.enable = account.143.codec.g726_40.priority =
account.143.codec.ilbc.enable = account.143.codec.ilbc.priority =
account.143.codec.pcmu.enable = account.143.codec.pcmu.priority =
account.143.codec.pcma.enable = account.143.codec.pcma.priority =
account.143.codec.opus.enable = account.143.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.143.nat.nat_traversal = account.143.nat.udp_update_enable = account.143.nat.udp_update_time = account.143.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.143.blf.subscribe_period = account.143.dtmf.type = account.143.dtmf.dtmf_payload = account.143.dtmf.info_type = account.143.100rel_enable = account.143.subscribe_register = account.143.subscribe_mwi = account.143.subscribe_mwi_expires = account.143.subscribe_mwi_to_vm = voice_mail.number.143 = %BWVOICE-PORTAL-NUMBER-143% account.143.display_mwi.enable = account.143.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 680 OF 1142
account.143.cid_source_privacy = account.143.cid_source_ppi = account.143.session_timer.enable = account.143.session_timer.expires = account.143.session_timer.refresher = account.143.enable_user_equal_phone = account.143.srtp_encryption = account.143.ptime = account.143.shared_line = %BWSHAREDLINE-BINARY-143% account.143.register_mac = account.143.register_line = account.143.reg_fail_retry_interval = account.143.reg_failed_retry_min_time = account.143.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.143.conf_type =
account.143.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-143%
account.143.sip_server_type = account.143.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.143.register_expires_overlap = account.143.subscribe_expires_overlap = account.143.auto_dial_enable = account.143.auto_dial_num = account.143.cp_source = account.143.transfer_refer_to_contact_header.enable = #V80 Add account.143.custom_ua = account.143.callpark_enable = account.143.check_cseq.enable = account.143.check_to_tag.enable = account.143.hold_use_inactive = account.143.line_seize.expires = account.143.update_ack_while_dialing = account.143.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.143.always_fwd.enable =
account.143.always_fwd.target =
account.143.always_fwd.off_code =
account.143.always_fwd.on_code =
account.143.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 681 OF 1142
account.143.busy_fwd.target = account.143.busy_fwd.off_code = account.143.busy_fwd.on_code = account.143.timeout_fwd.enable = account.143.timeout_fwd.target = account.143.timeout_fwd.timeout = account.143.timeout_fwd.off_code = account.143.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.143.dnd.enable =
account.143.dnd.on_code =
account.143.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.143.reg.enable =
handset.143.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.143.xsi.user =%BWLOGIN-ID-143% account.143.xsi.password =%XSIPASSWORD-143% account.143.xsi.host =%XSP_ADDRESS% account.143.xsi.server_type = account.143.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.143.ldap.enable =
handset.143.ldap.name_filter=
handset.143.ldap.number_filter=
handset.143.ldap.host=
handset.143.ldap.port=
handset.143.ldap.base=
handset.143.ldap.user=
handset.143.ldap.password=
handset.143.ldap.max_hits=
handset.143.ldap.name_attr=
handset.143.ldap.numb_attr=
handset.143.ldap.display_name=
handset.143.ldap.version=
handset.143.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 682 OF 1142
handset.143.ldap.ldap_sort= handset.143.ldap.tls_mode= handset.143.ldap.call_out_lookup= handset.143.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account144 Settings
##
##########################################################################
#############
account.144.enable=%BWLINE-BINARY-144% account.144.label=%BWEXTENSION-144% account.144.display_name=%BWCLID-144% account.144.auth_name=%BWAUTHUSER-144% account.144.user_name=%BWLINEPORT-144% account.144.password=%BWAUTHPASSWORD-144%
#W80B ADD account.144.sip_server.template = account.144.media_transmit.enable =
account.144.alarm.template = account.144.alarm.server = account.144.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.144.sip_server.1.failback_mode =
account.144.sip_server.1.failback_timeout =
account.144.sip_server.1.register_on_enable =
account.144.sip_server.1.failback_subscribe.enable =
account.144.sip_server.1.invite_retry_counts =
account.144.sip_server.1.only_signal_with_registered =
account.144.sip_server.2.failback_mode = account.144.sip_server.2.failback_timeout = account.144.sip_server.2.register_on_enable = account.144.sip_server.2.failback_subscribe.enable = account.144.sip_server.2.invite_retry_counts = account.144.sip_server.2.only_signal_with_registered =
account.144.naptr_build = account.144.fallback.redundancy_type = account.144.fallback.timeout =
account.144.dns_cache_type = account.144.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 683 OF 1142
account.144.anonymous_call = account.144.reject_anonymous_call = account.144.send_anonymous_code = account.144.anonymous_call_oncode = account.144.anonymous_call_offcode = account.144.send_anonymous_rejection_code = account.144.anonymous_reject_oncode = account.144.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.144.codec.g722.enable =
account.144.codec.g722.priority =
account.144.codec.g729.enable = account.144.codec.g729.priority =
account.144.codec.g726_16.enable = account.144.codec.g726_16.priority =
account.144.codec.g726_24.enable = account.144.codec.g726_24.priority =
account.144.codec.g726_32.enable = account.144.codec.g726_32.priority =
account.144.codec.g726_40.enable = account.144.codec.g726_40.priority =
account.144.codec.ilbc.enable = account.144.codec.ilbc.priority =
account.144.codec.pcmu.enable = account.144.codec.pcmu.priority =
account.144.codec.pcma.enable = account.144.codec.pcma.priority =
account.144.codec.opus.enable = account.144.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.144.nat.nat_traversal = account.144.nat.udp_update_enable = account.144.nat.udp_update_time = account.144.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 684 OF 1142
########################################################################## #############
account.144.blf.subscribe_period = account.144.dtmf.type = account.144.dtmf.dtmf_payload = account.144.dtmf.info_type = account.144.100rel_enable = account.144.subscribe_register = account.144.subscribe_mwi = account.144.subscribe_mwi_expires = account.144.subscribe_mwi_to_vm = voice_mail.number.144 = %BWVOICE-PORTAL-NUMBER-144% account.144.display_mwi.enable = account.144.cid_source = account.144.cid_source_privacy = account.144.cid_source_ppi = account.144.session_timer.enable = account.144.session_timer.expires = account.144.session_timer.refresher = account.144.enable_user_equal_phone = account.144.srtp_encryption = account.144.ptime = account.144.shared_line = %BWSHAREDLINE-BINARY-144% account.144.register_mac = account.144.register_line = account.144.reg_fail_retry_interval = account.144.reg_failed_retry_min_time = account.144.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.144.conf_type =
account.144.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-144%
account.144.sip_server_type = account.144.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.144.register_expires_overlap = account.144.subscribe_expires_overlap = account.144.auto_dial_enable = account.144.auto_dial_num = account.144.cp_source = account.144.transfer_refer_to_contact_header.enable = #V80 Add account.144.custom_ua = account.144.callpark_enable = account.144.check_cseq.enable = account.144.check_to_tag.enable = account.144.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 685 OF 1142
account.144.line_seize.expires = account.144.update_ack_while_dialing = account.144.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.144.always_fwd.enable =
account.144.always_fwd.target =
account.144.always_fwd.off_code =
account.144.always_fwd.on_code =
account.144.busy_fwd.enable =
account.144.busy_fwd.target =
account.144.busy_fwd.off_code =
account.144.busy_fwd.on_code =
account.144.timeout_fwd.enable =
account.144.timeout_fwd.target =
account.144.timeout_fwd.timeout =
account.144.timeout_fwd.off_code =
account.144.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.144.dnd.enable =
account.144.dnd.on_code =
account.144.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.144.reg.enable =
handset.144.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.144.xsi.user =%BWLOGIN-ID-144% account.144.xsi.password =%XSIPASSWORD-144% account.144.xsi.host =%XSP_ADDRESS% account.144.xsi.server_type = account.144.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 686 OF 1142
########################################################################## ############# handset.144.ldap.enable = handset.144.ldap.name_filter= handset.144.ldap.number_filter= handset.144.ldap.host= handset.144.ldap.port= handset.144.ldap.base= handset.144.ldap.user= handset.144.ldap.password= handset.144.ldap.max_hits= handset.144.ldap.name_attr= handset.144.ldap.numb_attr= handset.144.ldap.display_name= handset.144.ldap.version= handset.144.ldap.call_in_lookup= handset.144.ldap.ldap_sort= handset.144.ldap.tls_mode= handset.144.ldap.call_out_lookup= handset.144.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account145 Settings
##
##########################################################################
#############
account.145.enable=%BWLINE-BINARY-145% account.145.label=%BWEXTENSION-145% account.145.display_name=%BWCLID-145% account.145.auth_name=%BWAUTHUSER-145% account.145.user_name=%BWLINEPORT-145% account.145.password=%BWAUTHPASSWORD-145%
#W80B ADD account.145.sip_server.template = account.145.media_transmit.enable =
account.145.alarm.template = account.145.alarm.server = account.145.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.145.sip_server.1.failback_mode =
account.145.sip_server.1.failback_timeout =
account.145.sip_server.1.register_on_enable =
account.145.sip_server.1.failback_subscribe.enable =
account.145.sip_server.1.invite_retry_counts =
account.145.sip_server.1.only_signal_with_registered =
account.145.sip_server.2.failback_mode = account.145.sip_server.2.failback_timeout = account.145.sip_server.2.register_on_enable = account.145.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 687 OF 1142
account.145.sip_server.2.invite_retry_counts = account.145.sip_server.2.only_signal_with_registered =
account.145.naptr_build = account.145.fallback.redundancy_type = account.145.fallback.timeout =
account.145.dns_cache_type = account.145.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.145.anonymous_call =
account.145.reject_anonymous_call =
account.145.send_anonymous_code =
account.145.anonymous_call_oncode =
account.145.anonymous_call_offcode =
account.145.send_anonymous_rejection_code =
account.145.anonymous_reject_oncode =
account.145.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.145.codec.g722.enable =
account.145.codec.g722.priority =
account.145.codec.g729.enable = account.145.codec.g729.priority =
account.145.codec.g726_16.enable = account.145.codec.g726_16.priority =
account.145.codec.g726_24.enable = account.145.codec.g726_24.priority =
account.145.codec.g726_32.enable = account.145.codec.g726_32.priority =
account.145.codec.g726_40.enable = account.145.codec.g726_40.priority =
account.145.codec.ilbc.enable = account.145.codec.ilbc.priority =
account.145.codec.pcmu.enable = account.145.codec.pcmu.priority =
account.145.codec.pcma.enable = account.145.codec.pcma.priority =
account.145.codec.opus.enable = account.145.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 688 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.145.nat.nat_traversal = account.145.nat.udp_update_enable = account.145.nat.udp_update_time = account.145.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.145.blf.subscribe_period = account.145.dtmf.type = account.145.dtmf.dtmf_payload = account.145.dtmf.info_type = account.145.100rel_enable = account.145.subscribe_register = account.145.subscribe_mwi = account.145.subscribe_mwi_expires = account.145.subscribe_mwi_to_vm = voice_mail.number.145 = %BWVOICE-PORTAL-NUMBER-145% account.145.display_mwi.enable = account.145.cid_source = account.145.cid_source_privacy = account.145.cid_source_ppi = account.145.session_timer.enable = account.145.session_timer.expires = account.145.session_timer.refresher = account.145.enable_user_equal_phone = account.145.srtp_encryption = account.145.ptime = account.145.shared_line = %BWSHAREDLINE-BINARY-145% account.145.register_mac = account.145.register_line = account.145.reg_fail_retry_interval = account.145.reg_failed_retry_min_time = account.145.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.145.conf_type =
account.145.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-145%
account.145.sip_server_type = account.145.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 689 OF 1142
########################################################################## ############# ##DECT V81 Add
account.145.register_expires_overlap = account.145.subscribe_expires_overlap = account.145.auto_dial_enable = account.145.auto_dial_num = account.145.cp_source = account.145.transfer_refer_to_contact_header.enable = #V80 Add account.145.custom_ua = account.145.callpark_enable = account.145.check_cseq.enable = account.145.check_to_tag.enable = account.145.hold_use_inactive = account.145.line_seize.expires = account.145.update_ack_while_dialing = account.145.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.145.always_fwd.enable =
account.145.always_fwd.target =
account.145.always_fwd.off_code =
account.145.always_fwd.on_code =
account.145.busy_fwd.enable =
account.145.busy_fwd.target =
account.145.busy_fwd.off_code =
account.145.busy_fwd.on_code =
account.145.timeout_fwd.enable =
account.145.timeout_fwd.target =
account.145.timeout_fwd.timeout =
account.145.timeout_fwd.off_code =
account.145.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.145.dnd.enable =
account.145.dnd.on_code =
account.145.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.145.reg.enable =
handset.145.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 690 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.145.xsi.user =%BWLOGIN-ID-145% account.145.xsi.password =%XSIPASSWORD-145% account.145.xsi.host =%XSP_ADDRESS% account.145.xsi.server_type = account.145.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.145.ldap.enable =
handset.145.ldap.name_filter=
handset.145.ldap.number_filter=
handset.145.ldap.host=
handset.145.ldap.port=
handset.145.ldap.base=
handset.145.ldap.user=
handset.145.ldap.password=
handset.145.ldap.max_hits=
handset.145.ldap.name_attr=
handset.145.ldap.numb_attr=
handset.145.ldap.display_name=
handset.145.ldap.version=
handset.145.ldap.call_in_lookup=
handset.145.ldap.ldap_sort=
handset.145.ldap.tls_mode=
handset.145.ldap.call_out_lookup=
handset.145.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account146 Settings
##
##########################################################################
#############
account.146.enable=%BWLINE-BINARY-146% account.146.label=%BWEXTENSION-146% account.146.display_name=%BWCLID-146% account.146.auth_name=%BWAUTHUSER-146% account.146.user_name=%BWLINEPORT-146% account.146.password=%BWAUTHPASSWORD-146%
#W80B ADD account.146.sip_server.template = account.146.media_transmit.enable =
account.146.alarm.template = account.146.alarm.server = account.146.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 691 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.146.sip_server.1.failback_mode =
account.146.sip_server.1.failback_timeout =
account.146.sip_server.1.register_on_enable =
account.146.sip_server.1.failback_subscribe.enable =
account.146.sip_server.1.invite_retry_counts =
account.146.sip_server.1.only_signal_with_registered =
account.146.sip_server.2.failback_mode = account.146.sip_server.2.failback_timeout = account.146.sip_server.2.register_on_enable = account.146.sip_server.2.failback_subscribe.enable = account.146.sip_server.2.invite_retry_counts = account.146.sip_server.2.only_signal_with_registered =
account.146.naptr_build = account.146.fallback.redundancy_type = account.146.fallback.timeout =
account.146.dns_cache_type = account.146.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.146.anonymous_call =
account.146.reject_anonymous_call =
account.146.send_anonymous_code =
account.146.anonymous_call_oncode =
account.146.anonymous_call_offcode =
account.146.send_anonymous_rejection_code =
account.146.anonymous_reject_oncode =
account.146.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.146.codec.g722.enable =
account.146.codec.g722.priority =
account.146.codec.g729.enable = account.146.codec.g729.priority =
account.146.codec.g726_16.enable = account.146.codec.g726_16.priority =
account.146.codec.g726_24.enable = account.146.codec.g726_24.priority =
account.146.codec.g726_32.enable = account.146.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 692 OF 1142
account.146.codec.g726_40.enable = account.146.codec.g726_40.priority =
account.146.codec.ilbc.enable = account.146.codec.ilbc.priority =
account.146.codec.pcmu.enable = account.146.codec.pcmu.priority =
account.146.codec.pcma.enable = account.146.codec.pcma.priority =
account.146.codec.opus.enable = account.146.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.146.nat.nat_traversal = account.146.nat.udp_update_enable = account.146.nat.udp_update_time = account.146.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.146.blf.subscribe_period = account.146.dtmf.type = account.146.dtmf.dtmf_payload = account.146.dtmf.info_type = account.146.100rel_enable = account.146.subscribe_register = account.146.subscribe_mwi = account.146.subscribe_mwi_expires = account.146.subscribe_mwi_to_vm = voice_mail.number.146 = %BWVOICE-PORTAL-NUMBER-146% account.146.display_mwi.enable = account.146.cid_source = account.146.cid_source_privacy = account.146.cid_source_ppi = account.146.session_timer.enable = account.146.session_timer.expires = account.146.session_timer.refresher = account.146.enable_user_equal_phone = account.146.srtp_encryption = account.146.ptime = account.146.shared_line = %BWSHAREDLINE-BINARY-146% account.146.register_mac = account.146.register_line = account.146.reg_fail_retry_interval = account.146.reg_failed_retry_min_time = account.146.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 693 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.146.conf_type =
account.146.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-146%
account.146.sip_server_type = account.146.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.146.register_expires_overlap = account.146.subscribe_expires_overlap = account.146.auto_dial_enable = account.146.auto_dial_num = account.146.cp_source = account.146.transfer_refer_to_contact_header.enable = #V80 Add account.146.custom_ua = account.146.callpark_enable = account.146.check_cseq.enable = account.146.check_to_tag.enable = account.146.hold_use_inactive = account.146.line_seize.expires = account.146.update_ack_while_dialing = account.146.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.146.always_fwd.enable =
account.146.always_fwd.target =
account.146.always_fwd.off_code =
account.146.always_fwd.on_code =
account.146.busy_fwd.enable =
account.146.busy_fwd.target =
account.146.busy_fwd.off_code =
account.146.busy_fwd.on_code =
account.146.timeout_fwd.enable =
account.146.timeout_fwd.target =
account.146.timeout_fwd.timeout =
account.146.timeout_fwd.off_code =
account.146.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 694 OF 1142
account.146.dnd.enable = account.146.dnd.on_code = account.146.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.146.reg.enable =
handset.146.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.146.xsi.user =%BWLOGIN-ID-146% account.146.xsi.password =%XSIPASSWORD-146% account.146.xsi.host =%XSP_ADDRESS% account.146.xsi.server_type = account.146.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.146.ldap.enable =
handset.146.ldap.name_filter=
handset.146.ldap.number_filter=
handset.146.ldap.host=
handset.146.ldap.port=
handset.146.ldap.base=
handset.146.ldap.user=
handset.146.ldap.password=
handset.146.ldap.max_hits=
handset.146.ldap.name_attr=
handset.146.ldap.numb_attr=
handset.146.ldap.display_name=
handset.146.ldap.version=
handset.146.ldap.call_in_lookup=
handset.146.ldap.ldap_sort=
handset.146.ldap.tls_mode=
handset.146.ldap.call_out_lookup=
handset.146.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account147 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 695 OF 1142
account.147.enable=%BWLINE-BINARY-147% account.147.label=%BWEXTENSION-147% account.147.display_name=%BWCLID-147% account.147.auth_name=%BWAUTHUSER-147% account.147.user_name=%BWLINEPORT-147% account.147.password=%BWAUTHPASSWORD-147%
#W80B ADD account.147.sip_server.template = account.147.media_transmit.enable =
account.147.alarm.template = account.147.alarm.server = account.147.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.147.sip_server.1.failback_mode =
account.147.sip_server.1.failback_timeout =
account.147.sip_server.1.register_on_enable =
account.147.sip_server.1.failback_subscribe.enable =
account.147.sip_server.1.invite_retry_counts =
account.147.sip_server.1.only_signal_with_registered =
account.147.sip_server.2.failback_mode = account.147.sip_server.2.failback_timeout = account.147.sip_server.2.register_on_enable = account.147.sip_server.2.failback_subscribe.enable = account.147.sip_server.2.invite_retry_counts = account.147.sip_server.2.only_signal_with_registered =
account.147.naptr_build = account.147.fallback.redundancy_type = account.147.fallback.timeout =
account.147.dns_cache_type = account.147.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.147.anonymous_call =
account.147.reject_anonymous_call =
account.147.send_anonymous_code =
account.147.anonymous_call_oncode =
account.147.anonymous_call_offcode =
account.147.send_anonymous_rejection_code =
account.147.anonymous_reject_oncode =
account.147.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 696 OF 1142
########################################################################## ############# account.147.codec.g722.enable = account.147.codec.g722.priority =
account.147.codec.g729.enable = account.147.codec.g729.priority =
account.147.codec.g726_16.enable = account.147.codec.g726_16.priority =
account.147.codec.g726_24.enable = account.147.codec.g726_24.priority =
account.147.codec.g726_32.enable = account.147.codec.g726_32.priority =
account.147.codec.g726_40.enable = account.147.codec.g726_40.priority =
account.147.codec.ilbc.enable = account.147.codec.ilbc.priority =
account.147.codec.pcmu.enable = account.147.codec.pcmu.priority =
account.147.codec.pcma.enable = account.147.codec.pcma.priority =
account.147.codec.opus.enable = account.147.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.147.nat.nat_traversal = account.147.nat.udp_update_enable = account.147.nat.udp_update_time = account.147.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.147.blf.subscribe_period = account.147.dtmf.type = account.147.dtmf.dtmf_payload = account.147.dtmf.info_type = account.147.100rel_enable = account.147.subscribe_register = account.147.subscribe_mwi = account.147.subscribe_mwi_expires = account.147.subscribe_mwi_to_vm = voice_mail.number.147 = %BWVOICE-PORTAL-NUMBER-147% account.147.display_mwi.enable = account.147.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 697 OF 1142
account.147.cid_source_privacy = account.147.cid_source_ppi = account.147.session_timer.enable = account.147.session_timer.expires = account.147.session_timer.refresher = account.147.enable_user_equal_phone = account.147.srtp_encryption = account.147.ptime = account.147.shared_line = %BWSHAREDLINE-BINARY-147% account.147.register_mac = account.147.register_line = account.147.reg_fail_retry_interval = account.147.reg_failed_retry_min_time = account.147.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.147.conf_type =
account.147.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-147%
account.147.sip_server_type = account.147.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.147.register_expires_overlap = account.147.subscribe_expires_overlap = account.147.auto_dial_enable = account.147.auto_dial_num = account.147.cp_source = account.147.transfer_refer_to_contact_header.enable = #V80 Add account.147.custom_ua = account.147.callpark_enable = account.147.check_cseq.enable = account.147.check_to_tag.enable = account.147.hold_use_inactive = account.147.line_seize.expires = account.147.update_ack_while_dialing = account.147.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.147.always_fwd.enable =
account.147.always_fwd.target =
account.147.always_fwd.off_code =
account.147.always_fwd.on_code =
account.147.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 698 OF 1142
account.147.busy_fwd.target = account.147.busy_fwd.off_code = account.147.busy_fwd.on_code = account.147.timeout_fwd.enable = account.147.timeout_fwd.target = account.147.timeout_fwd.timeout = account.147.timeout_fwd.off_code = account.147.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.147.dnd.enable =
account.147.dnd.on_code =
account.147.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.147.reg.enable =
handset.147.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.147.xsi.user =%BWLOGIN-ID-147% account.147.xsi.password =%XSIPASSWORD-147% account.147.xsi.host =%XSP_ADDRESS% account.147.xsi.server_type = account.147.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.147.ldap.enable =
handset.147.ldap.name_filter=
handset.147.ldap.number_filter=
handset.147.ldap.host=
handset.147.ldap.port=
handset.147.ldap.base=
handset.147.ldap.user=
handset.147.ldap.password=
handset.147.ldap.max_hits=
handset.147.ldap.name_attr=
handset.147.ldap.numb_attr=
handset.147.ldap.display_name=
handset.147.ldap.version=
handset.147.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 699 OF 1142
handset.147.ldap.ldap_sort= handset.147.ldap.tls_mode= handset.147.ldap.call_out_lookup= handset.147.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account148 Settings
##
##########################################################################
#############
account.148.enable=%BWLINE-BINARY-148% account.148.label=%BWEXTENSION-148% account.148.display_name=%BWCLID-148% account.148.auth_name=%BWAUTHUSER-148% account.148.user_name=%BWLINEPORT-148% account.148.password=%BWAUTHPASSWORD-148%
#W80B ADD account.148.sip_server.template = account.148.media_transmit.enable =
account.148.alarm.template = account.148.alarm.server = account.148.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.148.sip_server.1.failback_mode =
account.148.sip_server.1.failback_timeout =
account.148.sip_server.1.register_on_enable =
account.148.sip_server.1.failback_subscribe.enable =
account.148.sip_server.1.invite_retry_counts =
account.148.sip_server.1.only_signal_with_registered =
account.148.sip_server.2.failback_mode = account.148.sip_server.2.failback_timeout = account.148.sip_server.2.register_on_enable = account.148.sip_server.2.failback_subscribe.enable = account.148.sip_server.2.invite_retry_counts = account.148.sip_server.2.only_signal_with_registered =
account.148.naptr_build = account.148.fallback.redundancy_type = account.148.fallback.timeout =
account.148.dns_cache_type = account.148.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 700 OF 1142
account.148.anonymous_call = account.148.reject_anonymous_call = account.148.send_anonymous_code = account.148.anonymous_call_oncode = account.148.anonymous_call_offcode = account.148.send_anonymous_rejection_code = account.148.anonymous_reject_oncode = account.148.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.148.codec.g722.enable =
account.148.codec.g722.priority =
account.148.codec.g729.enable = account.148.codec.g729.priority =
account.148.codec.g726_16.enable = account.148.codec.g726_16.priority =
account.148.codec.g726_24.enable = account.148.codec.g726_24.priority =
account.148.codec.g726_32.enable = account.148.codec.g726_32.priority =
account.148.codec.g726_40.enable = account.148.codec.g726_40.priority =
account.148.codec.ilbc.enable = account.148.codec.ilbc.priority =
account.148.codec.pcmu.enable = account.148.codec.pcmu.priority =
account.148.codec.pcma.enable = account.148.codec.pcma.priority =
account.148.codec.opus.enable = account.148.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.148.nat.nat_traversal = account.148.nat.udp_update_enable = account.148.nat.udp_update_time = account.148.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 701 OF 1142
########################################################################## #############
account.148.blf.subscribe_period = account.148.dtmf.type = account.148.dtmf.dtmf_payload = account.148.dtmf.info_type = account.148.100rel_enable = account.148.subscribe_register = account.148.subscribe_mwi = account.148.subscribe_mwi_expires = account.148.subscribe_mwi_to_vm = voice_mail.number.148 = %BWVOICE-PORTAL-NUMBER-148% account.148.display_mwi.enable = account.148.cid_source = account.148.cid_source_privacy = account.148.cid_source_ppi = account.148.session_timer.enable = account.148.session_timer.expires = account.148.session_timer.refresher = account.148.enable_user_equal_phone = account.148.srtp_encryption = account.148.ptime = account.148.shared_line = %BWSHAREDLINE-BINARY-148% account.148.register_mac = account.148.register_line = account.148.reg_fail_retry_interval = account.148.reg_failed_retry_min_time = account.148.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.148.conf_type =
account.148.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-148%
account.148.sip_server_type = account.148.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.148.register_expires_overlap = account.148.subscribe_expires_overlap = account.148.auto_dial_enable = account.148.auto_dial_num = account.148.cp_source = account.148.transfer_refer_to_contact_header.enable = #V80 Add account.148.custom_ua = account.148.callpark_enable = account.148.check_cseq.enable = account.148.check_to_tag.enable = account.148.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 702 OF 1142
account.148.line_seize.expires = account.148.update_ack_while_dialing = account.148.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.148.always_fwd.enable =
account.148.always_fwd.target =
account.148.always_fwd.off_code =
account.148.always_fwd.on_code =
account.148.busy_fwd.enable =
account.148.busy_fwd.target =
account.148.busy_fwd.off_code =
account.148.busy_fwd.on_code =
account.148.timeout_fwd.enable =
account.148.timeout_fwd.target =
account.148.timeout_fwd.timeout =
account.148.timeout_fwd.off_code =
account.148.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.148.dnd.enable =
account.148.dnd.on_code =
account.148.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.148.reg.enable =
handset.148.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.148.xsi.user =%BWLOGIN-ID-148% account.148.xsi.password =%XSIPASSWORD-148% account.148.xsi.host =%XSP_ADDRESS% account.148.xsi.server_type = account.148.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 703 OF 1142
########################################################################## ############# handset.148.ldap.enable = handset.148.ldap.name_filter= handset.148.ldap.number_filter= handset.148.ldap.host= handset.148.ldap.port= handset.148.ldap.base= handset.148.ldap.user= handset.148.ldap.password= handset.148.ldap.max_hits= handset.148.ldap.name_attr= handset.148.ldap.numb_attr= handset.148.ldap.display_name= handset.148.ldap.version= handset.148.ldap.call_in_lookup= handset.148.ldap.ldap_sort= handset.148.ldap.tls_mode= handset.148.ldap.call_out_lookup= handset.148.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account149 Settings
##
##########################################################################
#############
account.149.enable=%BWLINE-BINARY-149% account.149.label=%BWEXTENSION-149% account.149.display_name=%BWCLID-149% account.149.auth_name=%BWAUTHUSER-149% account.149.user_name=%BWLINEPORT-149% account.149.password=%BWAUTHPASSWORD-149%
#W80B ADD account.149.sip_server.template = account.149.media_transmit.enable =
account.149.alarm.template = account.149.alarm.server = account.149.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.149.sip_server.1.failback_mode =
account.149.sip_server.1.failback_timeout =
account.149.sip_server.1.register_on_enable =
account.149.sip_server.1.failback_subscribe.enable =
account.149.sip_server.1.invite_retry_counts =
account.149.sip_server.1.only_signal_with_registered =
account.149.sip_server.2.failback_mode = account.149.sip_server.2.failback_timeout = account.149.sip_server.2.register_on_enable = account.149.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 704 OF 1142
account.149.sip_server.2.invite_retry_counts = account.149.sip_server.2.only_signal_with_registered =
account.149.naptr_build = account.149.fallback.redundancy_type = account.149.fallback.timeout =
account.149.dns_cache_type = account.149.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.149.anonymous_call =
account.149.reject_anonymous_call =
account.149.send_anonymous_code =
account.149.anonymous_call_oncode =
account.149.anonymous_call_offcode =
account.149.send_anonymous_rejection_code =
account.149.anonymous_reject_oncode =
account.149.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.149.codec.g722.enable =
account.149.codec.g722.priority =
account.149.codec.g729.enable = account.149.codec.g729.priority =
account.149.codec.g726_16.enable = account.149.codec.g726_16.priority =
account.149.codec.g726_24.enable = account.149.codec.g726_24.priority =
account.149.codec.g726_32.enable = account.149.codec.g726_32.priority =
account.149.codec.g726_40.enable = account.149.codec.g726_40.priority =
account.149.codec.ilbc.enable = account.149.codec.ilbc.priority =
account.149.codec.pcmu.enable = account.149.codec.pcmu.priority =
account.149.codec.pcma.enable = account.149.codec.pcma.priority =
account.149.codec.opus.enable = account.149.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 705 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.149.nat.nat_traversal = account.149.nat.udp_update_enable = account.149.nat.udp_update_time = account.149.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.149.blf.subscribe_period = account.149.dtmf.type = account.149.dtmf.dtmf_payload = account.149.dtmf.info_type = account.149.100rel_enable = account.149.subscribe_register = account.149.subscribe_mwi = account.149.subscribe_mwi_expires = account.149.subscribe_mwi_to_vm = voice_mail.number.149 = %BWVOICE-PORTAL-NUMBER-149% account.149.display_mwi.enable = account.149.cid_source = account.149.cid_source_privacy = account.149.cid_source_ppi = account.149.session_timer.enable = account.149.session_timer.expires = account.149.session_timer.refresher = account.149.enable_user_equal_phone = account.149.srtp_encryption = account.149.ptime = account.149.shared_line = %BWSHAREDLINE-BINARY-149% account.149.register_mac = account.149.register_line = account.149.reg_fail_retry_interval = account.149.reg_failed_retry_min_time = account.149.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.149.conf_type =
account.149.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-149%
account.149.sip_server_type = account.149.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 706 OF 1142
########################################################################## ############# ##DECT V81 Add
account.149.register_expires_overlap = account.149.subscribe_expires_overlap = account.149.auto_dial_enable = account.149.auto_dial_num = account.149.cp_source = account.149.transfer_refer_to_contact_header.enable = #V80 Add account.149.custom_ua = account.149.callpark_enable = account.149.check_cseq.enable = account.149.check_to_tag.enable = account.149.hold_use_inactive = account.149.line_seize.expires = account.149.update_ack_while_dialing = account.149.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.149.always_fwd.enable =
account.149.always_fwd.target =
account.149.always_fwd.off_code =
account.149.always_fwd.on_code =
account.149.busy_fwd.enable =
account.149.busy_fwd.target =
account.149.busy_fwd.off_code =
account.149.busy_fwd.on_code =
account.149.timeout_fwd.enable =
account.149.timeout_fwd.target =
account.149.timeout_fwd.timeout =
account.149.timeout_fwd.off_code =
account.149.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.149.dnd.enable =
account.149.dnd.on_code =
account.149.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.149.reg.enable =
handset.149.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 707 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.149.xsi.user =%BWLOGIN-ID-149% account.149.xsi.password =%XSIPASSWORD-149% account.149.xsi.host =%XSP_ADDRESS% account.149.xsi.server_type = account.149.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.149.ldap.enable =
handset.149.ldap.name_filter=
handset.149.ldap.number_filter=
handset.149.ldap.host=
handset.149.ldap.port=
handset.149.ldap.base=
handset.149.ldap.user=
handset.149.ldap.password=
handset.149.ldap.max_hits=
handset.149.ldap.name_attr=
handset.149.ldap.numb_attr=
handset.149.ldap.display_name=
handset.149.ldap.version=
handset.149.ldap.call_in_lookup=
handset.149.ldap.ldap_sort=
handset.149.ldap.tls_mode=
handset.149.ldap.call_out_lookup=
handset.149.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account150 Settings
##
##########################################################################
#############
account.150.enable=%BWLINE-BINARY-150% account.150.label=%BWEXTENSION-150% account.150.display_name=%BWCLID-150% account.150.auth_name=%BWAUTHUSER-150% account.150.user_name=%BWLINEPORT-150% account.150.password=%BWAUTHPASSWORD-150%
#W80B ADD account.150.sip_server.template = account.150.media_transmit.enable =
account.150.alarm.template = account.150.alarm.server = account.150.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 708 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.150.sip_server.1.failback_mode =
account.150.sip_server.1.failback_timeout =
account.150.sip_server.1.register_on_enable =
account.150.sip_server.1.failback_subscribe.enable =
account.150.sip_server.1.invite_retry_counts =
account.150.sip_server.1.only_signal_with_registered =
account.150.sip_server.2.failback_mode = account.150.sip_server.2.failback_timeout = account.150.sip_server.2.register_on_enable = account.150.sip_server.2.failback_subscribe.enable = account.150.sip_server.2.invite_retry_counts = account.150.sip_server.2.only_signal_with_registered =
account.150.naptr_build = account.150.fallback.redundancy_type = account.150.fallback.timeout =
account.150.dns_cache_type = account.150.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.150.anonymous_call =
account.150.reject_anonymous_call =
account.150.send_anonymous_code =
account.150.anonymous_call_oncode =
account.150.anonymous_call_offcode =
account.150.send_anonymous_rejection_code =
account.150.anonymous_reject_oncode =
account.150.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.150.codec.g722.enable =
account.150.codec.g722.priority =
account.150.codec.g729.enable = account.150.codec.g729.priority =
account.150.codec.g726_16.enable = account.150.codec.g726_16.priority =
account.150.codec.g726_24.enable = account.150.codec.g726_24.priority =
account.150.codec.g726_32.enable = account.150.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 709 OF 1142
account.150.codec.g726_40.enable = account.150.codec.g726_40.priority =
account.150.codec.ilbc.enable = account.150.codec.ilbc.priority =
account.150.codec.pcmu.enable = account.150.codec.pcmu.priority =
account.150.codec.pcma.enable = account.150.codec.pcma.priority =
account.150.codec.opus.enable = account.150.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.150.nat.nat_traversal = account.150.nat.udp_update_enable = account.150.nat.udp_update_time = account.150.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.150.blf.subscribe_period = account.150.dtmf.type = account.150.dtmf.dtmf_payload = account.150.dtmf.info_type = account.150.100rel_enable = account.150.subscribe_register = account.150.subscribe_mwi = account.150.subscribe_mwi_expires = account.150.subscribe_mwi_to_vm = voice_mail.number.150 = %BWVOICE-PORTAL-NUMBER-150% account.150.display_mwi.enable = account.150.cid_source = account.150.cid_source_privacy = account.150.cid_source_ppi = account.150.session_timer.enable = account.150.session_timer.expires = account.150.session_timer.refresher = account.150.enable_user_equal_phone = account.150.srtp_encryption = account.150.ptime = account.150.shared_line = %BWSHAREDLINE-BINARY-150% account.150.register_mac = account.150.register_line = account.150.reg_fail_retry_interval = account.150.reg_failed_retry_min_time = account.150.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 710 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.150.conf_type =
account.150.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-150%
account.150.sip_server_type = account.150.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.150.register_expires_overlap = account.150.subscribe_expires_overlap = account.150.auto_dial_enable = account.150.auto_dial_num = account.150.cp_source = account.150.transfer_refer_to_contact_header.enable = #V80 Add account.150.custom_ua = account.150.callpark_enable = account.150.check_cseq.enable = account.150.check_to_tag.enable = account.150.hold_use_inactive = account.150.line_seize.expires = account.150.update_ack_while_dialing = account.150.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.150.always_fwd.enable =
account.150.always_fwd.target =
account.150.always_fwd.off_code =
account.150.always_fwd.on_code =
account.150.busy_fwd.enable =
account.150.busy_fwd.target =
account.150.busy_fwd.off_code =
account.150.busy_fwd.on_code =
account.150.timeout_fwd.enable =
account.150.timeout_fwd.target =
account.150.timeout_fwd.timeout =
account.150.timeout_fwd.off_code =
account.150.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 711 OF 1142
account.150.dnd.enable = account.150.dnd.on_code = account.150.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.150.reg.enable =
handset.150.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.150.xsi.user =%BWLOGIN-ID-150% account.150.xsi.password =%XSIPASSWORD-150% account.150.xsi.host =%XSP_ADDRESS% account.150.xsi.server_type = account.150.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.150.ldap.enable =
handset.150.ldap.name_filter=
handset.150.ldap.number_filter=
handset.150.ldap.host=
handset.150.ldap.port=
handset.150.ldap.base=
handset.150.ldap.user=
handset.150.ldap.password=
handset.150.ldap.max_hits=
handset.150.ldap.name_attr=
handset.150.ldap.numb_attr=
handset.150.ldap.display_name=
handset.150.ldap.version=
handset.150.ldap.call_in_lookup=
handset.150.ldap.ldap_sort=
handset.150.ldap.tls_mode=
handset.150.ldap.call_out_lookup=
handset.150.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account151 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 712 OF 1142
account.151.enable=%BWLINE-BINARY-151% account.151.label=%BWEXTENSION-151% account.151.display_name=%BWCLID-151% account.151.auth_name=%BWAUTHUSER-151% account.151.user_name=%BWLINEPORT-151% account.151.password=%BWAUTHPASSWORD-151%
#W80B ADD account.151.sip_server.template = account.151.media_transmit.enable =
account.151.alarm.template = account.151.alarm.server = account.151.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.151.sip_server.1.failback_mode =
account.151.sip_server.1.failback_timeout =
account.151.sip_server.1.register_on_enable =
account.151.sip_server.1.failback_subscribe.enable =
account.151.sip_server.1.invite_retry_counts =
account.151.sip_server.1.only_signal_with_registered =
account.151.sip_server.2.failback_mode = account.151.sip_server.2.failback_timeout = account.151.sip_server.2.register_on_enable = account.151.sip_server.2.failback_subscribe.enable = account.151.sip_server.2.invite_retry_counts = account.151.sip_server.2.only_signal_with_registered =
account.151.naptr_build = account.151.fallback.redundancy_type = account.151.fallback.timeout =
account.151.dns_cache_type = account.151.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.151.anonymous_call =
account.151.reject_anonymous_call =
account.151.send_anonymous_code =
account.151.anonymous_call_oncode =
account.151.anonymous_call_offcode =
account.151.send_anonymous_rejection_code =
account.151.anonymous_reject_oncode =
account.151.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 713 OF 1142
########################################################################## ############# account.151.codec.g722.enable = account.151.codec.g722.priority =
account.151.codec.g729.enable = account.151.codec.g729.priority =
account.151.codec.g726_16.enable = account.151.codec.g726_16.priority =
account.151.codec.g726_24.enable = account.151.codec.g726_24.priority =
account.151.codec.g726_32.enable = account.151.codec.g726_32.priority =
account.151.codec.g726_40.enable = account.151.codec.g726_40.priority =
account.151.codec.ilbc.enable = account.151.codec.ilbc.priority =
account.151.codec.pcmu.enable = account.151.codec.pcmu.priority =
account.151.codec.pcma.enable = account.151.codec.pcma.priority =
account.151.codec.opus.enable = account.151.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.151.nat.nat_traversal = account.151.nat.udp_update_enable = account.151.nat.udp_update_time = account.151.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.151.blf.subscribe_period = account.151.dtmf.type = account.151.dtmf.dtmf_payload = account.151.dtmf.info_type = account.151.100rel_enable = account.151.subscribe_register = account.151.subscribe_mwi = account.151.subscribe_mwi_expires = account.151.subscribe_mwi_to_vm = voice_mail.number.151 = %BWVOICE-PORTAL-NUMBER-151% account.151.display_mwi.enable = account.151.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 714 OF 1142
account.151.cid_source_privacy = account.151.cid_source_ppi = account.151.session_timer.enable = account.151.session_timer.expires = account.151.session_timer.refresher = account.151.enable_user_equal_phone = account.151.srtp_encryption = account.151.ptime = account.151.shared_line = %BWSHAREDLINE-BINARY-151% account.151.register_mac = account.151.register_line = account.151.reg_fail_retry_interval = account.151.reg_failed_retry_min_time = account.151.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.151.conf_type =
account.151.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-151%
account.151.sip_server_type = account.151.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.151.register_expires_overlap = account.151.subscribe_expires_overlap = account.151.auto_dial_enable = account.151.auto_dial_num = account.151.cp_source = account.151.transfer_refer_to_contact_header.enable = #V80 Add account.151.custom_ua = account.151.callpark_enable = account.151.check_cseq.enable = account.151.check_to_tag.enable = account.151.hold_use_inactive = account.151.line_seize.expires = account.151.update_ack_while_dialing = account.151.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.151.always_fwd.enable =
account.151.always_fwd.target =
account.151.always_fwd.off_code =
account.151.always_fwd.on_code =
account.151.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 715 OF 1142
account.151.busy_fwd.target = account.151.busy_fwd.off_code = account.151.busy_fwd.on_code = account.151.timeout_fwd.enable = account.151.timeout_fwd.target = account.151.timeout_fwd.timeout = account.151.timeout_fwd.off_code = account.151.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.151.dnd.enable =
account.151.dnd.on_code =
account.151.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.151.reg.enable =
handset.151.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.151.xsi.user =%BWLOGIN-ID-151% account.151.xsi.password =%XSIPASSWORD-151% account.151.xsi.host =%XSP_ADDRESS% account.151.xsi.server_type = account.151.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.151.ldap.enable =
handset.151.ldap.name_filter=
handset.151.ldap.number_filter=
handset.151.ldap.host=
handset.151.ldap.port=
handset.151.ldap.base=
handset.151.ldap.user=
handset.151.ldap.password=
handset.151.ldap.max_hits=
handset.151.ldap.name_attr=
handset.151.ldap.numb_attr=
handset.151.ldap.display_name=
handset.151.ldap.version=
handset.151.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 716 OF 1142
handset.151.ldap.ldap_sort= handset.151.ldap.tls_mode= handset.151.ldap.call_out_lookup= handset.151.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account152 Settings
##
##########################################################################
#############
account.152.enable=%BWLINE-BINARY-152% account.152.label=%BWEXTENSION-152% account.152.display_name=%BWCLID-152% account.152.auth_name=%BWAUTHUSER-152% account.152.user_name=%BWLINEPORT-152% account.152.password=%BWAUTHPASSWORD-152%
#W80B ADD account.152.sip_server.template = account.152.media_transmit.enable =
account.152.alarm.template = account.152.alarm.server = account.152.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.152.sip_server.1.failback_mode =
account.152.sip_server.1.failback_timeout =
account.152.sip_server.1.register_on_enable =
account.152.sip_server.1.failback_subscribe.enable =
account.152.sip_server.1.invite_retry_counts =
account.152.sip_server.1.only_signal_with_registered =
account.152.sip_server.2.failback_mode = account.152.sip_server.2.failback_timeout = account.152.sip_server.2.register_on_enable = account.152.sip_server.2.failback_subscribe.enable = account.152.sip_server.2.invite_retry_counts = account.152.sip_server.2.only_signal_with_registered =
account.152.naptr_build = account.152.fallback.redundancy_type = account.152.fallback.timeout =
account.152.dns_cache_type = account.152.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 717 OF 1142
account.152.anonymous_call = account.152.reject_anonymous_call = account.152.send_anonymous_code = account.152.anonymous_call_oncode = account.152.anonymous_call_offcode = account.152.send_anonymous_rejection_code = account.152.anonymous_reject_oncode = account.152.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.152.codec.g722.enable =
account.152.codec.g722.priority =
account.152.codec.g729.enable = account.152.codec.g729.priority =
account.152.codec.g726_16.enable = account.152.codec.g726_16.priority =
account.152.codec.g726_24.enable = account.152.codec.g726_24.priority =
account.152.codec.g726_32.enable = account.152.codec.g726_32.priority =
account.152.codec.g726_40.enable = account.152.codec.g726_40.priority =
account.152.codec.ilbc.enable = account.152.codec.ilbc.priority =
account.152.codec.pcmu.enable = account.152.codec.pcmu.priority =
account.152.codec.pcma.enable = account.152.codec.pcma.priority =
account.152.codec.opus.enable = account.152.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.152.nat.nat_traversal = account.152.nat.udp_update_enable = account.152.nat.udp_update_time = account.152.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 718 OF 1142
########################################################################## #############
account.152.blf.subscribe_period = account.152.dtmf.type = account.152.dtmf.dtmf_payload = account.152.dtmf.info_type = account.152.100rel_enable = account.152.subscribe_register = account.152.subscribe_mwi = account.152.subscribe_mwi_expires = account.152.subscribe_mwi_to_vm = voice_mail.number.152 = %BWVOICE-PORTAL-NUMBER-152% account.152.display_mwi.enable = account.152.cid_source = account.152.cid_source_privacy = account.152.cid_source_ppi = account.152.session_timer.enable = account.152.session_timer.expires = account.152.session_timer.refresher = account.152.enable_user_equal_phone = account.152.srtp_encryption = account.152.ptime = account.152.shared_line = %BWSHAREDLINE-BINARY-152% account.152.register_mac = account.152.register_line = account.152.reg_fail_retry_interval = account.152.reg_failed_retry_min_time = account.152.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.152.conf_type =
account.152.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-152%
account.152.sip_server_type = account.152.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.152.register_expires_overlap = account.152.subscribe_expires_overlap = account.152.auto_dial_enable = account.152.auto_dial_num = account.152.cp_source = account.152.transfer_refer_to_contact_header.enable = #V80 Add account.152.custom_ua = account.152.callpark_enable = account.152.check_cseq.enable = account.152.check_to_tag.enable = account.152.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 719 OF 1142
account.152.line_seize.expires = account.152.update_ack_while_dialing = account.152.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.152.always_fwd.enable =
account.152.always_fwd.target =
account.152.always_fwd.off_code =
account.152.always_fwd.on_code =
account.152.busy_fwd.enable =
account.152.busy_fwd.target =
account.152.busy_fwd.off_code =
account.152.busy_fwd.on_code =
account.152.timeout_fwd.enable =
account.152.timeout_fwd.target =
account.152.timeout_fwd.timeout =
account.152.timeout_fwd.off_code =
account.152.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.152.dnd.enable =
account.152.dnd.on_code =
account.152.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.152.reg.enable =
handset.152.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.152.xsi.user =%BWLOGIN-ID-152% account.152.xsi.password =%XSIPASSWORD-152% account.152.xsi.host =%XSP_ADDRESS% account.152.xsi.server_type = account.152.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 720 OF 1142
########################################################################## ############# handset.152.ldap.enable = handset.152.ldap.name_filter= handset.152.ldap.number_filter= handset.152.ldap.host= handset.152.ldap.port= handset.152.ldap.base= handset.152.ldap.user= handset.152.ldap.password= handset.152.ldap.max_hits= handset.152.ldap.name_attr= handset.152.ldap.numb_attr= handset.152.ldap.display_name= handset.152.ldap.version= handset.152.ldap.call_in_lookup= handset.152.ldap.ldap_sort= handset.152.ldap.tls_mode= handset.152.ldap.call_out_lookup= handset.152.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account153 Settings
##
##########################################################################
#############
account.153.enable=%BWLINE-BINARY-153% account.153.label=%BWEXTENSION-153% account.153.display_name=%BWCLID-153% account.153.auth_name=%BWAUTHUSER-153% account.153.user_name=%BWLINEPORT-153% account.153.password=%BWAUTHPASSWORD-153%
#W80B ADD account.153.sip_server.template = account.153.media_transmit.enable =
account.153.alarm.template = account.153.alarm.server = account.153.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.153.sip_server.1.failback_mode =
account.153.sip_server.1.failback_timeout =
account.153.sip_server.1.register_on_enable =
account.153.sip_server.1.failback_subscribe.enable =
account.153.sip_server.1.invite_retry_counts =
account.153.sip_server.1.only_signal_with_registered =
account.153.sip_server.2.failback_mode = account.153.sip_server.2.failback_timeout = account.153.sip_server.2.register_on_enable = account.153.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 721 OF 1142
account.153.sip_server.2.invite_retry_counts = account.153.sip_server.2.only_signal_with_registered =
account.153.naptr_build = account.153.fallback.redundancy_type = account.153.fallback.timeout =
account.153.dns_cache_type = account.153.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.153.anonymous_call =
account.153.reject_anonymous_call =
account.153.send_anonymous_code =
account.153.anonymous_call_oncode =
account.153.anonymous_call_offcode =
account.153.send_anonymous_rejection_code =
account.153.anonymous_reject_oncode =
account.153.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.153.codec.g722.enable =
account.153.codec.g722.priority =
account.153.codec.g729.enable = account.153.codec.g729.priority =
account.153.codec.g726_16.enable = account.153.codec.g726_16.priority =
account.153.codec.g726_24.enable = account.153.codec.g726_24.priority =
account.153.codec.g726_32.enable = account.153.codec.g726_32.priority =
account.153.codec.g726_40.enable = account.153.codec.g726_40.priority =
account.153.codec.ilbc.enable = account.153.codec.ilbc.priority =
account.153.codec.pcmu.enable = account.153.codec.pcmu.priority =
account.153.codec.pcma.enable = account.153.codec.pcma.priority =
account.153.codec.opus.enable = account.153.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 722 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.153.nat.nat_traversal = account.153.nat.udp_update_enable = account.153.nat.udp_update_time = account.153.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.153.blf.subscribe_period = account.153.dtmf.type = account.153.dtmf.dtmf_payload = account.153.dtmf.info_type = account.153.100rel_enable = account.153.subscribe_register = account.153.subscribe_mwi = account.153.subscribe_mwi_expires = account.153.subscribe_mwi_to_vm = voice_mail.number.153 = %BWVOICE-PORTAL-NUMBER-153% account.153.display_mwi.enable = account.153.cid_source = account.153.cid_source_privacy = account.153.cid_source_ppi = account.153.session_timer.enable = account.153.session_timer.expires = account.153.session_timer.refresher = account.153.enable_user_equal_phone = account.153.srtp_encryption = account.153.ptime = account.153.shared_line = %BWSHAREDLINE-BINARY-153% account.153.register_mac = account.153.register_line = account.153.reg_fail_retry_interval = account.153.reg_failed_retry_min_time = account.153.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.153.conf_type =
account.153.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-153%
account.153.sip_server_type = account.153.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 723 OF 1142
########################################################################## ############# ##DECT V81 Add
account.153.register_expires_overlap = account.153.subscribe_expires_overlap = account.153.auto_dial_enable = account.153.auto_dial_num = account.153.cp_source = account.153.transfer_refer_to_contact_header.enable = #V80 Add account.153.custom_ua = account.153.callpark_enable = account.153.check_cseq.enable = account.153.check_to_tag.enable = account.153.hold_use_inactive = account.153.line_seize.expires = account.153.update_ack_while_dialing = account.153.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.153.always_fwd.enable =
account.153.always_fwd.target =
account.153.always_fwd.off_code =
account.153.always_fwd.on_code =
account.153.busy_fwd.enable =
account.153.busy_fwd.target =
account.153.busy_fwd.off_code =
account.153.busy_fwd.on_code =
account.153.timeout_fwd.enable =
account.153.timeout_fwd.target =
account.153.timeout_fwd.timeout =
account.153.timeout_fwd.off_code =
account.153.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.153.dnd.enable =
account.153.dnd.on_code =
account.153.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.153.reg.enable =
handset.153.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 724 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.153.xsi.user =%BWLOGIN-ID-153% account.153.xsi.password =%XSIPASSWORD-153% account.153.xsi.host =%XSP_ADDRESS% account.153.xsi.server_type = account.153.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.153.ldap.enable =
handset.153.ldap.name_filter=
handset.153.ldap.number_filter=
handset.153.ldap.host=
handset.153.ldap.port=
handset.153.ldap.base=
handset.153.ldap.user=
handset.153.ldap.password=
handset.153.ldap.max_hits=
handset.153.ldap.name_attr=
handset.153.ldap.numb_attr=
handset.153.ldap.display_name=
handset.153.ldap.version=
handset.153.ldap.call_in_lookup=
handset.153.ldap.ldap_sort=
handset.153.ldap.tls_mode=
handset.153.ldap.call_out_lookup=
handset.153.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account154 Settings
##
##########################################################################
#############
account.154.enable=%BWLINE-BINARY-154% account.154.label=%BWEXTENSION-154% account.154.display_name=%BWCLID-154% account.154.auth_name=%BWAUTHUSER-154% account.154.user_name=%BWLINEPORT-154% account.154.password=%BWAUTHPASSWORD-154%
#W80B ADD account.154.sip_server.template = account.154.media_transmit.enable =
account.154.alarm.template = account.154.alarm.server = account.154.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 725 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.154.sip_server.1.failback_mode =
account.154.sip_server.1.failback_timeout =
account.154.sip_server.1.register_on_enable =
account.154.sip_server.1.failback_subscribe.enable =
account.154.sip_server.1.invite_retry_counts =
account.154.sip_server.1.only_signal_with_registered =
account.154.sip_server.2.failback_mode = account.154.sip_server.2.failback_timeout = account.154.sip_server.2.register_on_enable = account.154.sip_server.2.failback_subscribe.enable = account.154.sip_server.2.invite_retry_counts = account.154.sip_server.2.only_signal_with_registered =
account.154.naptr_build = account.154.fallback.redundancy_type = account.154.fallback.timeout =
account.154.dns_cache_type = account.154.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.154.anonymous_call =
account.154.reject_anonymous_call =
account.154.send_anonymous_code =
account.154.anonymous_call_oncode =
account.154.anonymous_call_offcode =
account.154.send_anonymous_rejection_code =
account.154.anonymous_reject_oncode =
account.154.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.154.codec.g722.enable =
account.154.codec.g722.priority =
account.154.codec.g729.enable = account.154.codec.g729.priority =
account.154.codec.g726_16.enable = account.154.codec.g726_16.priority =
account.154.codec.g726_24.enable = account.154.codec.g726_24.priority =
account.154.codec.g726_32.enable = account.154.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 726 OF 1142
account.154.codec.g726_40.enable = account.154.codec.g726_40.priority =
account.154.codec.ilbc.enable = account.154.codec.ilbc.priority =
account.154.codec.pcmu.enable = account.154.codec.pcmu.priority =
account.154.codec.pcma.enable = account.154.codec.pcma.priority =
account.154.codec.opus.enable = account.154.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.154.nat.nat_traversal = account.154.nat.udp_update_enable = account.154.nat.udp_update_time = account.154.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.154.blf.subscribe_period = account.154.dtmf.type = account.154.dtmf.dtmf_payload = account.154.dtmf.info_type = account.154.100rel_enable = account.154.subscribe_register = account.154.subscribe_mwi = account.154.subscribe_mwi_expires = account.154.subscribe_mwi_to_vm = voice_mail.number.154 = %BWVOICE-PORTAL-NUMBER-154% account.154.display_mwi.enable = account.154.cid_source = account.154.cid_source_privacy = account.154.cid_source_ppi = account.154.session_timer.enable = account.154.session_timer.expires = account.154.session_timer.refresher = account.154.enable_user_equal_phone = account.154.srtp_encryption = account.154.ptime = account.154.shared_line = %BWSHAREDLINE-BINARY-154% account.154.register_mac = account.154.register_line = account.154.reg_fail_retry_interval = account.154.reg_failed_retry_min_time = account.154.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 727 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.154.conf_type =
account.154.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-154%
account.154.sip_server_type = account.154.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.154.register_expires_overlap = account.154.subscribe_expires_overlap = account.154.auto_dial_enable = account.154.auto_dial_num = account.154.cp_source = account.154.transfer_refer_to_contact_header.enable = #V80 Add account.154.custom_ua = account.154.callpark_enable = account.154.check_cseq.enable = account.154.check_to_tag.enable = account.154.hold_use_inactive = account.154.line_seize.expires = account.154.update_ack_while_dialing = account.154.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.154.always_fwd.enable =
account.154.always_fwd.target =
account.154.always_fwd.off_code =
account.154.always_fwd.on_code =
account.154.busy_fwd.enable =
account.154.busy_fwd.target =
account.154.busy_fwd.off_code =
account.154.busy_fwd.on_code =
account.154.timeout_fwd.enable =
account.154.timeout_fwd.target =
account.154.timeout_fwd.timeout =
account.154.timeout_fwd.off_code =
account.154.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 728 OF 1142
account.154.dnd.enable = account.154.dnd.on_code = account.154.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.154.reg.enable =
handset.154.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.154.xsi.user =%BWLOGIN-ID-154% account.154.xsi.password =%XSIPASSWORD-154% account.154.xsi.host =%XSP_ADDRESS% account.154.xsi.server_type = account.154.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.154.ldap.enable =
handset.154.ldap.name_filter=
handset.154.ldap.number_filter=
handset.154.ldap.host=
handset.154.ldap.port=
handset.154.ldap.base=
handset.154.ldap.user=
handset.154.ldap.password=
handset.154.ldap.max_hits=
handset.154.ldap.name_attr=
handset.154.ldap.numb_attr=
handset.154.ldap.display_name=
handset.154.ldap.version=
handset.154.ldap.call_in_lookup=
handset.154.ldap.ldap_sort=
handset.154.ldap.tls_mode=
handset.154.ldap.call_out_lookup=
handset.154.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account155 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 729 OF 1142
account.155.enable=%BWLINE-BINARY-155% account.155.label=%BWEXTENSION-155% account.155.display_name=%BWCLID-155% account.155.auth_name=%BWAUTHUSER-155% account.155.user_name=%BWLINEPORT-155% account.155.password=%BWAUTHPASSWORD-155%
#W80B ADD account.155.sip_server.template = account.155.media_transmit.enable =
account.155.alarm.template = account.155.alarm.server = account.155.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.155.sip_server.1.failback_mode =
account.155.sip_server.1.failback_timeout =
account.155.sip_server.1.register_on_enable =
account.155.sip_server.1.failback_subscribe.enable =
account.155.sip_server.1.invite_retry_counts =
account.155.sip_server.1.only_signal_with_registered =
account.155.sip_server.2.failback_mode = account.155.sip_server.2.failback_timeout = account.155.sip_server.2.register_on_enable = account.155.sip_server.2.failback_subscribe.enable = account.155.sip_server.2.invite_retry_counts = account.155.sip_server.2.only_signal_with_registered =
account.155.naptr_build = account.155.fallback.redundancy_type = account.155.fallback.timeout =
account.155.dns_cache_type = account.155.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.155.anonymous_call =
account.155.reject_anonymous_call =
account.155.send_anonymous_code =
account.155.anonymous_call_oncode =
account.155.anonymous_call_offcode =
account.155.send_anonymous_rejection_code =
account.155.anonymous_reject_oncode =
account.155.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 730 OF 1142
########################################################################## ############# account.155.codec.g722.enable = account.155.codec.g722.priority =
account.155.codec.g729.enable = account.155.codec.g729.priority =
account.155.codec.g726_16.enable = account.155.codec.g726_16.priority =
account.155.codec.g726_24.enable = account.155.codec.g726_24.priority =
account.155.codec.g726_32.enable = account.155.codec.g726_32.priority =
account.155.codec.g726_40.enable = account.155.codec.g726_40.priority =
account.155.codec.ilbc.enable = account.155.codec.ilbc.priority =
account.155.codec.pcmu.enable = account.155.codec.pcmu.priority =
account.155.codec.pcma.enable = account.155.codec.pcma.priority =
account.155.codec.opus.enable = account.155.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.155.nat.nat_traversal = account.155.nat.udp_update_enable = account.155.nat.udp_update_time = account.155.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.155.blf.subscribe_period = account.155.dtmf.type = account.155.dtmf.dtmf_payload = account.155.dtmf.info_type = account.155.100rel_enable = account.155.subscribe_register = account.155.subscribe_mwi = account.155.subscribe_mwi_expires = account.155.subscribe_mwi_to_vm = voice_mail.number.155 = %BWVOICE-PORTAL-NUMBER-155% account.155.display_mwi.enable = account.155.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 731 OF 1142
account.155.cid_source_privacy = account.155.cid_source_ppi = account.155.session_timer.enable = account.155.session_timer.expires = account.155.session_timer.refresher = account.155.enable_user_equal_phone = account.155.srtp_encryption = account.155.ptime = account.155.shared_line = %BWSHAREDLINE-BINARY-155% account.155.register_mac = account.155.register_line = account.155.reg_fail_retry_interval = account.155.reg_failed_retry_min_time = account.155.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.155.conf_type =
account.155.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-155%
account.155.sip_server_type = account.155.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.155.register_expires_overlap = account.155.subscribe_expires_overlap = account.155.auto_dial_enable = account.155.auto_dial_num = account.155.cp_source = account.155.transfer_refer_to_contact_header.enable = #V80 Add account.155.custom_ua = account.155.callpark_enable = account.155.check_cseq.enable = account.155.check_to_tag.enable = account.155.hold_use_inactive = account.155.line_seize.expires = account.155.update_ack_while_dialing = account.155.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.155.always_fwd.enable =
account.155.always_fwd.target =
account.155.always_fwd.off_code =
account.155.always_fwd.on_code =
account.155.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 732 OF 1142
account.155.busy_fwd.target = account.155.busy_fwd.off_code = account.155.busy_fwd.on_code = account.155.timeout_fwd.enable = account.155.timeout_fwd.target = account.155.timeout_fwd.timeout = account.155.timeout_fwd.off_code = account.155.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.155.dnd.enable =
account.155.dnd.on_code =
account.155.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.155.reg.enable =
handset.155.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.155.xsi.user =%BWLOGIN-ID-155% account.155.xsi.password =%XSIPASSWORD-155% account.155.xsi.host =%XSP_ADDRESS% account.155.xsi.server_type = account.155.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.155.ldap.enable =
handset.155.ldap.name_filter=
handset.155.ldap.number_filter=
handset.155.ldap.host=
handset.155.ldap.port=
handset.155.ldap.base=
handset.155.ldap.user=
handset.155.ldap.password=
handset.155.ldap.max_hits=
handset.155.ldap.name_attr=
handset.155.ldap.numb_attr=
handset.155.ldap.display_name=
handset.155.ldap.version=
handset.155.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 733 OF 1142
handset.155.ldap.ldap_sort= handset.155.ldap.tls_mode= handset.155.ldap.call_out_lookup= handset.155.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account156 Settings
##
##########################################################################
#############
account.156.enable=%BWLINE-BINARY-156% account.156.label=%BWEXTENSION-156% account.156.display_name=%BWCLID-156% account.156.auth_name=%BWAUTHUSER-156% account.156.user_name=%BWLINEPORT-156% account.156.password=%BWAUTHPASSWORD-156%
#W80B ADD account.156.sip_server.template = account.156.media_transmit.enable =
account.156.alarm.template = account.156.alarm.server = account.156.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.156.sip_server.1.failback_mode =
account.156.sip_server.1.failback_timeout =
account.156.sip_server.1.register_on_enable =
account.156.sip_server.1.failback_subscribe.enable =
account.156.sip_server.1.invite_retry_counts =
account.156.sip_server.1.only_signal_with_registered =
account.156.sip_server.2.failback_mode = account.156.sip_server.2.failback_timeout = account.156.sip_server.2.register_on_enable = account.156.sip_server.2.failback_subscribe.enable = account.156.sip_server.2.invite_retry_counts = account.156.sip_server.2.only_signal_with_registered =
account.156.naptr_build = account.156.fallback.redundancy_type = account.156.fallback.timeout =
account.156.dns_cache_type = account.156.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 734 OF 1142
account.156.anonymous_call = account.156.reject_anonymous_call = account.156.send_anonymous_code = account.156.anonymous_call_oncode = account.156.anonymous_call_offcode = account.156.send_anonymous_rejection_code = account.156.anonymous_reject_oncode = account.156.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.156.codec.g722.enable =
account.156.codec.g722.priority =
account.156.codec.g729.enable = account.156.codec.g729.priority =
account.156.codec.g726_16.enable = account.156.codec.g726_16.priority =
account.156.codec.g726_24.enable = account.156.codec.g726_24.priority =
account.156.codec.g726_32.enable = account.156.codec.g726_32.priority =
account.156.codec.g726_40.enable = account.156.codec.g726_40.priority =
account.156.codec.ilbc.enable = account.156.codec.ilbc.priority =
account.156.codec.pcmu.enable = account.156.codec.pcmu.priority =
account.156.codec.pcma.enable = account.156.codec.pcma.priority =
account.156.codec.opus.enable = account.156.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.156.nat.nat_traversal = account.156.nat.udp_update_enable = account.156.nat.udp_update_time = account.156.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 735 OF 1142
########################################################################## #############
account.156.blf.subscribe_period = account.156.dtmf.type = account.156.dtmf.dtmf_payload = account.156.dtmf.info_type = account.156.100rel_enable = account.156.subscribe_register = account.156.subscribe_mwi = account.156.subscribe_mwi_expires = account.156.subscribe_mwi_to_vm = voice_mail.number.156 = %BWVOICE-PORTAL-NUMBER-156% account.156.display_mwi.enable = account.156.cid_source = account.156.cid_source_privacy = account.156.cid_source_ppi = account.156.session_timer.enable = account.156.session_timer.expires = account.156.session_timer.refresher = account.156.enable_user_equal_phone = account.156.srtp_encryption = account.156.ptime = account.156.shared_line = %BWSHAREDLINE-BINARY-156% account.156.register_mac = account.156.register_line = account.156.reg_fail_retry_interval = account.156.reg_failed_retry_min_time = account.156.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.156.conf_type =
account.156.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-156%
account.156.sip_server_type = account.156.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.156.register_expires_overlap = account.156.subscribe_expires_overlap = account.156.auto_dial_enable = account.156.auto_dial_num = account.156.cp_source = account.156.transfer_refer_to_contact_header.enable = #V80 Add account.156.custom_ua = account.156.callpark_enable = account.156.check_cseq.enable = account.156.check_to_tag.enable = account.156.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 736 OF 1142
account.156.line_seize.expires = account.156.update_ack_while_dialing = account.156.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.156.always_fwd.enable =
account.156.always_fwd.target =
account.156.always_fwd.off_code =
account.156.always_fwd.on_code =
account.156.busy_fwd.enable =
account.156.busy_fwd.target =
account.156.busy_fwd.off_code =
account.156.busy_fwd.on_code =
account.156.timeout_fwd.enable =
account.156.timeout_fwd.target =
account.156.timeout_fwd.timeout =
account.156.timeout_fwd.off_code =
account.156.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.156.dnd.enable =
account.156.dnd.on_code =
account.156.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.156.reg.enable =
handset.156.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.156.xsi.user =%BWLOGIN-ID-156% account.156.xsi.password =%XSIPASSWORD-156% account.156.xsi.host =%XSP_ADDRESS% account.156.xsi.server_type = account.156.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 737 OF 1142
########################################################################## ############# handset.156.ldap.enable = handset.156.ldap.name_filter= handset.156.ldap.number_filter= handset.156.ldap.host= handset.156.ldap.port= handset.156.ldap.base= handset.156.ldap.user= handset.156.ldap.password= handset.156.ldap.max_hits= handset.156.ldap.name_attr= handset.156.ldap.numb_attr= handset.156.ldap.display_name= handset.156.ldap.version= handset.156.ldap.call_in_lookup= handset.156.ldap.ldap_sort= handset.156.ldap.tls_mode= handset.156.ldap.call_out_lookup= handset.156.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account157 Settings
##
##########################################################################
#############
account.157.enable=%BWLINE-BINARY-157% account.157.label=%BWEXTENSION-157% account.157.display_name=%BWCLID-157% account.157.auth_name=%BWAUTHUSER-157% account.157.user_name=%BWLINEPORT-157% account.157.password=%BWAUTHPASSWORD-157%
#W80B ADD account.157.sip_server.template = account.157.media_transmit.enable =
account.157.alarm.template = account.157.alarm.server = account.157.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.157.sip_server.1.failback_mode =
account.157.sip_server.1.failback_timeout =
account.157.sip_server.1.register_on_enable =
account.157.sip_server.1.failback_subscribe.enable =
account.157.sip_server.1.invite_retry_counts =
account.157.sip_server.1.only_signal_with_registered =
account.157.sip_server.2.failback_mode = account.157.sip_server.2.failback_timeout = account.157.sip_server.2.register_on_enable = account.157.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 738 OF 1142
account.157.sip_server.2.invite_retry_counts = account.157.sip_server.2.only_signal_with_registered =
account.157.naptr_build = account.157.fallback.redundancy_type = account.157.fallback.timeout =
account.157.dns_cache_type = account.157.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.157.anonymous_call =
account.157.reject_anonymous_call =
account.157.send_anonymous_code =
account.157.anonymous_call_oncode =
account.157.anonymous_call_offcode =
account.157.send_anonymous_rejection_code =
account.157.anonymous_reject_oncode =
account.157.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.157.codec.g722.enable =
account.157.codec.g722.priority =
account.157.codec.g729.enable = account.157.codec.g729.priority =
account.157.codec.g726_16.enable = account.157.codec.g726_16.priority =
account.157.codec.g726_24.enable = account.157.codec.g726_24.priority =
account.157.codec.g726_32.enable = account.157.codec.g726_32.priority =
account.157.codec.g726_40.enable = account.157.codec.g726_40.priority =
account.157.codec.ilbc.enable = account.157.codec.ilbc.priority =
account.157.codec.pcmu.enable = account.157.codec.pcmu.priority =
account.157.codec.pcma.enable = account.157.codec.pcma.priority =
account.157.codec.opus.enable = account.157.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 739 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.157.nat.nat_traversal = account.157.nat.udp_update_enable = account.157.nat.udp_update_time = account.157.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.157.blf.subscribe_period = account.157.dtmf.type = account.157.dtmf.dtmf_payload = account.157.dtmf.info_type = account.157.100rel_enable = account.157.subscribe_register = account.157.subscribe_mwi = account.157.subscribe_mwi_expires = account.157.subscribe_mwi_to_vm = voice_mail.number.157 = %BWVOICE-PORTAL-NUMBER-157% account.157.display_mwi.enable = account.157.cid_source = account.157.cid_source_privacy = account.157.cid_source_ppi = account.157.session_timer.enable = account.157.session_timer.expires = account.157.session_timer.refresher = account.157.enable_user_equal_phone = account.157.srtp_encryption = account.157.ptime = account.157.shared_line = %BWSHAREDLINE-BINARY-157% account.157.register_mac = account.157.register_line = account.157.reg_fail_retry_interval = account.157.reg_failed_retry_min_time = account.157.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.157.conf_type =
account.157.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-157%
account.157.sip_server_type = account.157.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 740 OF 1142
########################################################################## ############# ##DECT V81 Add
account.157.register_expires_overlap = account.157.subscribe_expires_overlap = account.157.auto_dial_enable = account.157.auto_dial_num = account.157.cp_source = account.157.transfer_refer_to_contact_header.enable = #V80 Add account.157.custom_ua = account.157.callpark_enable = account.157.check_cseq.enable = account.157.check_to_tag.enable = account.157.hold_use_inactive = account.157.line_seize.expires = account.157.update_ack_while_dialing = account.157.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.157.always_fwd.enable =
account.157.always_fwd.target =
account.157.always_fwd.off_code =
account.157.always_fwd.on_code =
account.157.busy_fwd.enable =
account.157.busy_fwd.target =
account.157.busy_fwd.off_code =
account.157.busy_fwd.on_code =
account.157.timeout_fwd.enable =
account.157.timeout_fwd.target =
account.157.timeout_fwd.timeout =
account.157.timeout_fwd.off_code =
account.157.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.157.dnd.enable =
account.157.dnd.on_code =
account.157.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.157.reg.enable =
handset.157.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 741 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.157.xsi.user =%BWLOGIN-ID-157% account.157.xsi.password =%XSIPASSWORD-157% account.157.xsi.host =%XSP_ADDRESS% account.157.xsi.server_type = account.157.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.157.ldap.enable =
handset.157.ldap.name_filter=
handset.157.ldap.number_filter=
handset.157.ldap.host=
handset.157.ldap.port=
handset.157.ldap.base=
handset.157.ldap.user=
handset.157.ldap.password=
handset.157.ldap.max_hits=
handset.157.ldap.name_attr=
handset.157.ldap.numb_attr=
handset.157.ldap.display_name=
handset.157.ldap.version=
handset.157.ldap.call_in_lookup=
handset.157.ldap.ldap_sort=
handset.157.ldap.tls_mode=
handset.157.ldap.call_out_lookup=
handset.157.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account158 Settings
##
##########################################################################
#############
account.158.enable=%BWLINE-BINARY-158% account.158.label=%BWEXTENSION-158% account.158.display_name=%BWCLID-158% account.158.auth_name=%BWAUTHUSER-158% account.158.user_name=%BWLINEPORT-158% account.158.password=%BWAUTHPASSWORD-158%
#W80B ADD account.158.sip_server.template = account.158.media_transmit.enable =
account.158.alarm.template = account.158.alarm.server = account.158.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 742 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.158.sip_server.1.failback_mode =
account.158.sip_server.1.failback_timeout =
account.158.sip_server.1.register_on_enable =
account.158.sip_server.1.failback_subscribe.enable =
account.158.sip_server.1.invite_retry_counts =
account.158.sip_server.1.only_signal_with_registered =
account.158.sip_server.2.failback_mode = account.158.sip_server.2.failback_timeout = account.158.sip_server.2.register_on_enable = account.158.sip_server.2.failback_subscribe.enable = account.158.sip_server.2.invite_retry_counts = account.158.sip_server.2.only_signal_with_registered =
account.158.naptr_build = account.158.fallback.redundancy_type = account.158.fallback.timeout =
account.158.dns_cache_type = account.158.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.158.anonymous_call =
account.158.reject_anonymous_call =
account.158.send_anonymous_code =
account.158.anonymous_call_oncode =
account.158.anonymous_call_offcode =
account.158.send_anonymous_rejection_code =
account.158.anonymous_reject_oncode =
account.158.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.158.codec.g722.enable =
account.158.codec.g722.priority =
account.158.codec.g729.enable = account.158.codec.g729.priority =
account.158.codec.g726_16.enable = account.158.codec.g726_16.priority =
account.158.codec.g726_24.enable = account.158.codec.g726_24.priority =
account.158.codec.g726_32.enable = account.158.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 743 OF 1142
account.158.codec.g726_40.enable = account.158.codec.g726_40.priority =
account.158.codec.ilbc.enable = account.158.codec.ilbc.priority =
account.158.codec.pcmu.enable = account.158.codec.pcmu.priority =
account.158.codec.pcma.enable = account.158.codec.pcma.priority =
account.158.codec.opus.enable = account.158.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.158.nat.nat_traversal = account.158.nat.udp_update_enable = account.158.nat.udp_update_time = account.158.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.158.blf.subscribe_period = account.158.dtmf.type = account.158.dtmf.dtmf_payload = account.158.dtmf.info_type = account.158.100rel_enable = account.158.subscribe_register = account.158.subscribe_mwi = account.158.subscribe_mwi_expires = account.158.subscribe_mwi_to_vm = voice_mail.number.158 = %BWVOICE-PORTAL-NUMBER-158% account.158.display_mwi.enable = account.158.cid_source = account.158.cid_source_privacy = account.158.cid_source_ppi = account.158.session_timer.enable = account.158.session_timer.expires = account.158.session_timer.refresher = account.158.enable_user_equal_phone = account.158.srtp_encryption = account.158.ptime = account.158.shared_line = %BWSHAREDLINE-BINARY-158% account.158.register_mac = account.158.register_line = account.158.reg_fail_retry_interval = account.158.reg_failed_retry_min_time = account.158.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 744 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.158.conf_type =
account.158.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-158%
account.158.sip_server_type = account.158.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.158.register_expires_overlap = account.158.subscribe_expires_overlap = account.158.auto_dial_enable = account.158.auto_dial_num = account.158.cp_source = account.158.transfer_refer_to_contact_header.enable = #V80 Add account.158.custom_ua = account.158.callpark_enable = account.158.check_cseq.enable = account.158.check_to_tag.enable = account.158.hold_use_inactive = account.158.line_seize.expires = account.158.update_ack_while_dialing = account.158.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.158.always_fwd.enable =
account.158.always_fwd.target =
account.158.always_fwd.off_code =
account.158.always_fwd.on_code =
account.158.busy_fwd.enable =
account.158.busy_fwd.target =
account.158.busy_fwd.off_code =
account.158.busy_fwd.on_code =
account.158.timeout_fwd.enable =
account.158.timeout_fwd.target =
account.158.timeout_fwd.timeout =
account.158.timeout_fwd.off_code =
account.158.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 745 OF 1142
account.158.dnd.enable = account.158.dnd.on_code = account.158.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.158.reg.enable =
handset.158.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.158.xsi.user =%BWLOGIN-ID-158% account.158.xsi.password =%XSIPASSWORD-158% account.158.xsi.host =%XSP_ADDRESS% account.158.xsi.server_type = account.158.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.158.ldap.enable =
handset.158.ldap.name_filter=
handset.158.ldap.number_filter=
handset.158.ldap.host=
handset.158.ldap.port=
handset.158.ldap.base=
handset.158.ldap.user=
handset.158.ldap.password=
handset.158.ldap.max_hits=
handset.158.ldap.name_attr=
handset.158.ldap.numb_attr=
handset.158.ldap.display_name=
handset.158.ldap.version=
handset.158.ldap.call_in_lookup=
handset.158.ldap.ldap_sort=
handset.158.ldap.tls_mode=
handset.158.ldap.call_out_lookup=
handset.158.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account159 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 746 OF 1142
account.159.enable=%BWLINE-BINARY-159% account.159.label=%BWEXTENSION-159% account.159.display_name=%BWCLID-159% account.159.auth_name=%BWAUTHUSER-159% account.159.user_name=%BWLINEPORT-159% account.159.password=%BWAUTHPASSWORD-159%
#W80B ADD account.159.sip_server.template = account.159.media_transmit.enable =
account.159.alarm.template = account.159.alarm.server = account.159.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.159.sip_server.1.failback_mode =
account.159.sip_server.1.failback_timeout =
account.159.sip_server.1.register_on_enable =
account.159.sip_server.1.failback_subscribe.enable =
account.159.sip_server.1.invite_retry_counts =
account.159.sip_server.1.only_signal_with_registered =
account.159.sip_server.2.failback_mode = account.159.sip_server.2.failback_timeout = account.159.sip_server.2.register_on_enable = account.159.sip_server.2.failback_subscribe.enable = account.159.sip_server.2.invite_retry_counts = account.159.sip_server.2.only_signal_with_registered =
account.159.naptr_build = account.159.fallback.redundancy_type = account.159.fallback.timeout =
account.159.dns_cache_type = account.159.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.159.anonymous_call =
account.159.reject_anonymous_call =
account.159.send_anonymous_code =
account.159.anonymous_call_oncode =
account.159.anonymous_call_offcode =
account.159.send_anonymous_rejection_code =
account.159.anonymous_reject_oncode =
account.159.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 747 OF 1142
########################################################################## ############# account.159.codec.g722.enable = account.159.codec.g722.priority =
account.159.codec.g729.enable = account.159.codec.g729.priority =
account.159.codec.g726_16.enable = account.159.codec.g726_16.priority =
account.159.codec.g726_24.enable = account.159.codec.g726_24.priority =
account.159.codec.g726_32.enable = account.159.codec.g726_32.priority =
account.159.codec.g726_40.enable = account.159.codec.g726_40.priority =
account.159.codec.ilbc.enable = account.159.codec.ilbc.priority =
account.159.codec.pcmu.enable = account.159.codec.pcmu.priority =
account.159.codec.pcma.enable = account.159.codec.pcma.priority =
account.159.codec.opus.enable = account.159.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.159.nat.nat_traversal = account.159.nat.udp_update_enable = account.159.nat.udp_update_time = account.159.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.159.blf.subscribe_period = account.159.dtmf.type = account.159.dtmf.dtmf_payload = account.159.dtmf.info_type = account.159.100rel_enable = account.159.subscribe_register = account.159.subscribe_mwi = account.159.subscribe_mwi_expires = account.159.subscribe_mwi_to_vm = voice_mail.number.159 = %BWVOICE-PORTAL-NUMBER-159% account.159.display_mwi.enable = account.159.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 748 OF 1142
account.159.cid_source_privacy = account.159.cid_source_ppi = account.159.session_timer.enable = account.159.session_timer.expires = account.159.session_timer.refresher = account.159.enable_user_equal_phone = account.159.srtp_encryption = account.159.ptime = account.159.shared_line = %BWSHAREDLINE-BINARY-159% account.159.register_mac = account.159.register_line = account.159.reg_fail_retry_interval = account.159.reg_failed_retry_min_time = account.159.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.159.conf_type =
account.159.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-159%
account.159.sip_server_type = account.159.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.159.register_expires_overlap = account.159.subscribe_expires_overlap = account.159.auto_dial_enable = account.159.auto_dial_num = account.159.cp_source = account.159.transfer_refer_to_contact_header.enable = #V80 Add account.159.custom_ua = account.159.callpark_enable = account.159.check_cseq.enable = account.159.check_to_tag.enable = account.159.hold_use_inactive = account.159.line_seize.expires = account.159.update_ack_while_dialing = account.159.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.159.always_fwd.enable =
account.159.always_fwd.target =
account.159.always_fwd.off_code =
account.159.always_fwd.on_code =
account.159.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 749 OF 1142
account.159.busy_fwd.target = account.159.busy_fwd.off_code = account.159.busy_fwd.on_code = account.159.timeout_fwd.enable = account.159.timeout_fwd.target = account.159.timeout_fwd.timeout = account.159.timeout_fwd.off_code = account.159.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.159.dnd.enable =
account.159.dnd.on_code =
account.159.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.159.reg.enable =
handset.159.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.159.xsi.user =%BWLOGIN-ID-159% account.159.xsi.password =%XSIPASSWORD-159% account.159.xsi.host =%XSP_ADDRESS% account.159.xsi.server_type = account.159.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.159.ldap.enable =
handset.159.ldap.name_filter=
handset.159.ldap.number_filter=
handset.159.ldap.host=
handset.159.ldap.port=
handset.159.ldap.base=
handset.159.ldap.user=
handset.159.ldap.password=
handset.159.ldap.max_hits=
handset.159.ldap.name_attr=
handset.159.ldap.numb_attr=
handset.159.ldap.display_name=
handset.159.ldap.version=
handset.159.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 750 OF 1142
handset.159.ldap.ldap_sort= handset.159.ldap.tls_mode= handset.159.ldap.call_out_lookup= handset.159.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account160 Settings
##
##########################################################################
#############
account.160.enable=%BWLINE-BINARY-160% account.160.label=%BWEXTENSION-160% account.160.display_name=%BWCLID-160% account.160.auth_name=%BWAUTHUSER-160% account.160.user_name=%BWLINEPORT-160% account.160.password=%BWAUTHPASSWORD-160%
#W80B ADD account.160.sip_server.template = account.160.media_transmit.enable =
account.160.alarm.template = account.160.alarm.server = account.160.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.160.sip_server.1.failback_mode =
account.160.sip_server.1.failback_timeout =
account.160.sip_server.1.register_on_enable =
account.160.sip_server.1.failback_subscribe.enable =
account.160.sip_server.1.invite_retry_counts =
account.160.sip_server.1.only_signal_with_registered =
account.160.sip_server.2.failback_mode = account.160.sip_server.2.failback_timeout = account.160.sip_server.2.register_on_enable = account.160.sip_server.2.failback_subscribe.enable = account.160.sip_server.2.invite_retry_counts = account.160.sip_server.2.only_signal_with_registered =
account.160.naptr_build = account.160.fallback.redundancy_type = account.160.fallback.timeout =
account.160.dns_cache_type = account.160.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 751 OF 1142
account.160.anonymous_call = account.160.reject_anonymous_call = account.160.send_anonymous_code = account.160.anonymous_call_oncode = account.160.anonymous_call_offcode = account.160.send_anonymous_rejection_code = account.160.anonymous_reject_oncode = account.160.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.160.codec.g722.enable =
account.160.codec.g722.priority =
account.160.codec.g729.enable = account.160.codec.g729.priority =
account.160.codec.g726_16.enable = account.160.codec.g726_16.priority =
account.160.codec.g726_24.enable = account.160.codec.g726_24.priority =
account.160.codec.g726_32.enable = account.160.codec.g726_32.priority =
account.160.codec.g726_40.enable = account.160.codec.g726_40.priority =
account.160.codec.ilbc.enable = account.160.codec.ilbc.priority =
account.160.codec.pcmu.enable = account.160.codec.pcmu.priority =
account.160.codec.pcma.enable = account.160.codec.pcma.priority =
account.160.codec.opus.enable = account.160.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.160.nat.nat_traversal = account.160.nat.udp_update_enable = account.160.nat.udp_update_time = account.160.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 752 OF 1142
########################################################################## #############
account.160.blf.subscribe_period = account.160.dtmf.type = account.160.dtmf.dtmf_payload = account.160.dtmf.info_type = account.160.100rel_enable = account.160.subscribe_register = account.160.subscribe_mwi = account.160.subscribe_mwi_expires = account.160.subscribe_mwi_to_vm = voice_mail.number.160 = %BWVOICE-PORTAL-NUMBER-160% account.160.display_mwi.enable = account.160.cid_source = account.160.cid_source_privacy = account.160.cid_source_ppi = account.160.session_timer.enable = account.160.session_timer.expires = account.160.session_timer.refresher = account.160.enable_user_equal_phone = account.160.srtp_encryption = account.160.ptime = account.160.shared_line = %BWSHAREDLINE-BINARY-160% account.160.register_mac = account.160.register_line = account.160.reg_fail_retry_interval = account.160.reg_failed_retry_min_time = account.160.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.160.conf_type =
account.160.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-160%
account.160.sip_server_type = account.160.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.160.register_expires_overlap = account.160.subscribe_expires_overlap = account.160.auto_dial_enable = account.160.auto_dial_num = account.160.cp_source = account.160.transfer_refer_to_contact_header.enable = #V80 Add account.160.custom_ua = account.160.callpark_enable = account.160.check_cseq.enable = account.160.check_to_tag.enable = account.160.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 753 OF 1142
account.160.line_seize.expires = account.160.update_ack_while_dialing = account.160.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.160.always_fwd.enable =
account.160.always_fwd.target =
account.160.always_fwd.off_code =
account.160.always_fwd.on_code =
account.160.busy_fwd.enable =
account.160.busy_fwd.target =
account.160.busy_fwd.off_code =
account.160.busy_fwd.on_code =
account.160.timeout_fwd.enable =
account.160.timeout_fwd.target =
account.160.timeout_fwd.timeout =
account.160.timeout_fwd.off_code =
account.160.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.160.dnd.enable =
account.160.dnd.on_code =
account.160.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.160.reg.enable =
handset.160.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.160.xsi.user =%BWLOGIN-ID-160% account.160.xsi.password =%XSIPASSWORD-160% account.160.xsi.host =%XSP_ADDRESS% account.160.xsi.server_type = account.160.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 754 OF 1142
########################################################################## ############# handset.160.ldap.enable = handset.160.ldap.name_filter= handset.160.ldap.number_filter= handset.160.ldap.host= handset.160.ldap.port= handset.160.ldap.base= handset.160.ldap.user= handset.160.ldap.password= handset.160.ldap.max_hits= handset.160.ldap.name_attr= handset.160.ldap.numb_attr= handset.160.ldap.display_name= handset.160.ldap.version= handset.160.ldap.call_in_lookup= handset.160.ldap.ldap_sort= handset.160.ldap.tls_mode= handset.160.ldap.call_out_lookup= handset.160.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account161 Settings
##
##########################################################################
#############
account.161.enable=%BWLINE-BINARY-161% account.161.label=%BWEXTENSION-161% account.161.display_name=%BWCLID-161% account.161.auth_name=%BWAUTHUSER-161% account.161.user_name=%BWLINEPORT-161% account.161.password=%BWAUTHPASSWORD-161%
#W80B ADD account.161.sip_server.template = account.161.media_transmit.enable =
account.161.alarm.template = account.161.alarm.server = account.161.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.161.sip_server.1.failback_mode =
account.161.sip_server.1.failback_timeout =
account.161.sip_server.1.register_on_enable =
account.161.sip_server.1.failback_subscribe.enable =
account.161.sip_server.1.invite_retry_counts =
account.161.sip_server.1.only_signal_with_registered =
account.161.sip_server.2.failback_mode = account.161.sip_server.2.failback_timeout = account.161.sip_server.2.register_on_enable = account.161.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 755 OF 1142
account.161.sip_server.2.invite_retry_counts = account.161.sip_server.2.only_signal_with_registered =
account.161.naptr_build = account.161.fallback.redundancy_type = account.161.fallback.timeout =
account.161.dns_cache_type = account.161.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.161.anonymous_call =
account.161.reject_anonymous_call =
account.161.send_anonymous_code =
account.161.anonymous_call_oncode =
account.161.anonymous_call_offcode =
account.161.send_anonymous_rejection_code =
account.161.anonymous_reject_oncode =
account.161.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.161.codec.g722.enable =
account.161.codec.g722.priority =
account.161.codec.g729.enable = account.161.codec.g729.priority =
account.161.codec.g726_16.enable = account.161.codec.g726_16.priority =
account.161.codec.g726_24.enable = account.161.codec.g726_24.priority =
account.161.codec.g726_32.enable = account.161.codec.g726_32.priority =
account.161.codec.g726_40.enable = account.161.codec.g726_40.priority =
account.161.codec.ilbc.enable = account.161.codec.ilbc.priority =
account.161.codec.pcmu.enable = account.161.codec.pcmu.priority =
account.161.codec.pcma.enable = account.161.codec.pcma.priority =
account.161.codec.opus.enable = account.161.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 756 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.161.nat.nat_traversal = account.161.nat.udp_update_enable = account.161.nat.udp_update_time = account.161.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.161.blf.subscribe_period = account.161.dtmf.type = account.161.dtmf.dtmf_payload = account.161.dtmf.info_type = account.161.100rel_enable = account.161.subscribe_register = account.161.subscribe_mwi = account.161.subscribe_mwi_expires = account.161.subscribe_mwi_to_vm = voice_mail.number.161 = %BWVOICE-PORTAL-NUMBER-161% account.161.display_mwi.enable = account.161.cid_source = account.161.cid_source_privacy = account.161.cid_source_ppi = account.161.session_timer.enable = account.161.session_timer.expires = account.161.session_timer.refresher = account.161.enable_user_equal_phone = account.161.srtp_encryption = account.161.ptime = account.161.shared_line = %BWSHAREDLINE-BINARY-161% account.161.register_mac = account.161.register_line = account.161.reg_fail_retry_interval = account.161.reg_failed_retry_min_time = account.161.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.161.conf_type =
account.161.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-161%
account.161.sip_server_type = account.161.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 757 OF 1142
########################################################################## ############# ##DECT V81 Add
account.161.register_expires_overlap = account.161.subscribe_expires_overlap = account.161.auto_dial_enable = account.161.auto_dial_num = account.161.cp_source = account.161.transfer_refer_to_contact_header.enable = #V80 Add account.161.custom_ua = account.161.callpark_enable = account.161.check_cseq.enable = account.161.check_to_tag.enable = account.161.hold_use_inactive = account.161.line_seize.expires = account.161.update_ack_while_dialing = account.161.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.161.always_fwd.enable =
account.161.always_fwd.target =
account.161.always_fwd.off_code =
account.161.always_fwd.on_code =
account.161.busy_fwd.enable =
account.161.busy_fwd.target =
account.161.busy_fwd.off_code =
account.161.busy_fwd.on_code =
account.161.timeout_fwd.enable =
account.161.timeout_fwd.target =
account.161.timeout_fwd.timeout =
account.161.timeout_fwd.off_code =
account.161.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.161.dnd.enable =
account.161.dnd.on_code =
account.161.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.161.reg.enable =
handset.161.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 758 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.161.xsi.user =%BWLOGIN-ID-161% account.161.xsi.password =%XSIPASSWORD-161% account.161.xsi.host =%XSP_ADDRESS% account.161.xsi.server_type = account.161.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.161.ldap.enable =
handset.161.ldap.name_filter=
handset.161.ldap.number_filter=
handset.161.ldap.host=
handset.161.ldap.port=
handset.161.ldap.base=
handset.161.ldap.user=
handset.161.ldap.password=
handset.161.ldap.max_hits=
handset.161.ldap.name_attr=
handset.161.ldap.numb_attr=
handset.161.ldap.display_name=
handset.161.ldap.version=
handset.161.ldap.call_in_lookup=
handset.161.ldap.ldap_sort=
handset.161.ldap.tls_mode=
handset.161.ldap.call_out_lookup=
handset.161.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account162 Settings
##
##########################################################################
#############
account.162.enable=%BWLINE-BINARY-162% account.162.label=%BWEXTENSION-162% account.162.display_name=%BWCLID-162% account.162.auth_name=%BWAUTHUSER-162% account.162.user_name=%BWLINEPORT-162% account.162.password=%BWAUTHPASSWORD-162%
#W80B ADD account.162.sip_server.template = account.162.media_transmit.enable =
account.162.alarm.template = account.162.alarm.server = account.162.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 759 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.162.sip_server.1.failback_mode =
account.162.sip_server.1.failback_timeout =
account.162.sip_server.1.register_on_enable =
account.162.sip_server.1.failback_subscribe.enable =
account.162.sip_server.1.invite_retry_counts =
account.162.sip_server.1.only_signal_with_registered =
account.162.sip_server.2.failback_mode = account.162.sip_server.2.failback_timeout = account.162.sip_server.2.register_on_enable = account.162.sip_server.2.failback_subscribe.enable = account.162.sip_server.2.invite_retry_counts = account.162.sip_server.2.only_signal_with_registered =
account.162.naptr_build = account.162.fallback.redundancy_type = account.162.fallback.timeout =
account.162.dns_cache_type = account.162.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.162.anonymous_call =
account.162.reject_anonymous_call =
account.162.send_anonymous_code =
account.162.anonymous_call_oncode =
account.162.anonymous_call_offcode =
account.162.send_anonymous_rejection_code =
account.162.anonymous_reject_oncode =
account.162.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.162.codec.g722.enable =
account.162.codec.g722.priority =
account.162.codec.g729.enable = account.162.codec.g729.priority =
account.162.codec.g726_16.enable = account.162.codec.g726_16.priority =
account.162.codec.g726_24.enable = account.162.codec.g726_24.priority =
account.162.codec.g726_32.enable = account.162.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 760 OF 1142
account.162.codec.g726_40.enable = account.162.codec.g726_40.priority =
account.162.codec.ilbc.enable = account.162.codec.ilbc.priority =
account.162.codec.pcmu.enable = account.162.codec.pcmu.priority =
account.162.codec.pcma.enable = account.162.codec.pcma.priority =
account.162.codec.opus.enable = account.162.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.162.nat.nat_traversal = account.162.nat.udp_update_enable = account.162.nat.udp_update_time = account.162.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.162.blf.subscribe_period = account.162.dtmf.type = account.162.dtmf.dtmf_payload = account.162.dtmf.info_type = account.162.100rel_enable = account.162.subscribe_register = account.162.subscribe_mwi = account.162.subscribe_mwi_expires = account.162.subscribe_mwi_to_vm = voice_mail.number.162 = %BWVOICE-PORTAL-NUMBER-162% account.162.display_mwi.enable = account.162.cid_source = account.162.cid_source_privacy = account.162.cid_source_ppi = account.162.session_timer.enable = account.162.session_timer.expires = account.162.session_timer.refresher = account.162.enable_user_equal_phone = account.162.srtp_encryption = account.162.ptime = account.162.shared_line = %BWSHAREDLINE-BINARY-162% account.162.register_mac = account.162.register_line = account.162.reg_fail_retry_interval = account.162.reg_failed_retry_min_time = account.162.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 761 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.162.conf_type =
account.162.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-162%
account.162.sip_server_type = account.162.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.162.register_expires_overlap = account.162.subscribe_expires_overlap = account.162.auto_dial_enable = account.162.auto_dial_num = account.162.cp_source = account.162.transfer_refer_to_contact_header.enable = #V80 Add account.162.custom_ua = account.162.callpark_enable = account.162.check_cseq.enable = account.162.check_to_tag.enable = account.162.hold_use_inactive = account.162.line_seize.expires = account.162.update_ack_while_dialing = account.162.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.162.always_fwd.enable =
account.162.always_fwd.target =
account.162.always_fwd.off_code =
account.162.always_fwd.on_code =
account.162.busy_fwd.enable =
account.162.busy_fwd.target =
account.162.busy_fwd.off_code =
account.162.busy_fwd.on_code =
account.162.timeout_fwd.enable =
account.162.timeout_fwd.target =
account.162.timeout_fwd.timeout =
account.162.timeout_fwd.off_code =
account.162.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 762 OF 1142
account.162.dnd.enable = account.162.dnd.on_code = account.162.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.162.reg.enable =
handset.162.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.162.xsi.user =%BWLOGIN-ID-162% account.162.xsi.password =%XSIPASSWORD-162% account.162.xsi.host =%XSP_ADDRESS% account.162.xsi.server_type = account.162.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.162.ldap.enable =
handset.162.ldap.name_filter=
handset.162.ldap.number_filter=
handset.162.ldap.host=
handset.162.ldap.port=
handset.162.ldap.base=
handset.162.ldap.user=
handset.162.ldap.password=
handset.162.ldap.max_hits=
handset.162.ldap.name_attr=
handset.162.ldap.numb_attr=
handset.162.ldap.display_name=
handset.162.ldap.version=
handset.162.ldap.call_in_lookup=
handset.162.ldap.ldap_sort=
handset.162.ldap.tls_mode=
handset.162.ldap.call_out_lookup=
handset.162.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account163 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 763 OF 1142
account.163.enable=%BWLINE-BINARY-163% account.163.label=%BWEXTENSION-163% account.163.display_name=%BWCLID-163% account.163.auth_name=%BWAUTHUSER-163% account.163.user_name=%BWLINEPORT-163% account.163.password=%BWAUTHPASSWORD-163%
#W80B ADD account.163.sip_server.template = account.163.media_transmit.enable =
account.163.alarm.template = account.163.alarm.server = account.163.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.163.sip_server.1.failback_mode =
account.163.sip_server.1.failback_timeout =
account.163.sip_server.1.register_on_enable =
account.163.sip_server.1.failback_subscribe.enable =
account.163.sip_server.1.invite_retry_counts =
account.163.sip_server.1.only_signal_with_registered =
account.163.sip_server.2.failback_mode = account.163.sip_server.2.failback_timeout = account.163.sip_server.2.register_on_enable = account.163.sip_server.2.failback_subscribe.enable = account.163.sip_server.2.invite_retry_counts = account.163.sip_server.2.only_signal_with_registered =
account.163.naptr_build = account.163.fallback.redundancy_type = account.163.fallback.timeout =
account.163.dns_cache_type = account.163.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.163.anonymous_call =
account.163.reject_anonymous_call =
account.163.send_anonymous_code =
account.163.anonymous_call_oncode =
account.163.anonymous_call_offcode =
account.163.send_anonymous_rejection_code =
account.163.anonymous_reject_oncode =
account.163.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 764 OF 1142
########################################################################## ############# account.163.codec.g722.enable = account.163.codec.g722.priority =
account.163.codec.g729.enable = account.163.codec.g729.priority =
account.163.codec.g726_16.enable = account.163.codec.g726_16.priority =
account.163.codec.g726_24.enable = account.163.codec.g726_24.priority =
account.163.codec.g726_32.enable = account.163.codec.g726_32.priority =
account.163.codec.g726_40.enable = account.163.codec.g726_40.priority =
account.163.codec.ilbc.enable = account.163.codec.ilbc.priority =
account.163.codec.pcmu.enable = account.163.codec.pcmu.priority =
account.163.codec.pcma.enable = account.163.codec.pcma.priority =
account.163.codec.opus.enable = account.163.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.163.nat.nat_traversal = account.163.nat.udp_update_enable = account.163.nat.udp_update_time = account.163.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.163.blf.subscribe_period = account.163.dtmf.type = account.163.dtmf.dtmf_payload = account.163.dtmf.info_type = account.163.100rel_enable = account.163.subscribe_register = account.163.subscribe_mwi = account.163.subscribe_mwi_expires = account.163.subscribe_mwi_to_vm = voice_mail.number.163 = %BWVOICE-PORTAL-NUMBER-163% account.163.display_mwi.enable = account.163.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 765 OF 1142
account.163.cid_source_privacy = account.163.cid_source_ppi = account.163.session_timer.enable = account.163.session_timer.expires = account.163.session_timer.refresher = account.163.enable_user_equal_phone = account.163.srtp_encryption = account.163.ptime = account.163.shared_line = %BWSHAREDLINE-BINARY-163% account.163.register_mac = account.163.register_line = account.163.reg_fail_retry_interval = account.163.reg_failed_retry_min_time = account.163.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.163.conf_type =
account.163.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-163%
account.163.sip_server_type = account.163.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.163.register_expires_overlap = account.163.subscribe_expires_overlap = account.163.auto_dial_enable = account.163.auto_dial_num = account.163.cp_source = account.163.transfer_refer_to_contact_header.enable = #V80 Add account.163.custom_ua = account.163.callpark_enable = account.163.check_cseq.enable = account.163.check_to_tag.enable = account.163.hold_use_inactive = account.163.line_seize.expires = account.163.update_ack_while_dialing = account.163.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.163.always_fwd.enable =
account.163.always_fwd.target =
account.163.always_fwd.off_code =
account.163.always_fwd.on_code =
account.163.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 766 OF 1142
account.163.busy_fwd.target = account.163.busy_fwd.off_code = account.163.busy_fwd.on_code = account.163.timeout_fwd.enable = account.163.timeout_fwd.target = account.163.timeout_fwd.timeout = account.163.timeout_fwd.off_code = account.163.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.163.dnd.enable =
account.163.dnd.on_code =
account.163.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.163.reg.enable =
handset.163.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.163.xsi.user =%BWLOGIN-ID-163% account.163.xsi.password =%XSIPASSWORD-163% account.163.xsi.host =%XSP_ADDRESS% account.163.xsi.server_type = account.163.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.163.ldap.enable =
handset.163.ldap.name_filter=
handset.163.ldap.number_filter=
handset.163.ldap.host=
handset.163.ldap.port=
handset.163.ldap.base=
handset.163.ldap.user=
handset.163.ldap.password=
handset.163.ldap.max_hits=
handset.163.ldap.name_attr=
handset.163.ldap.numb_attr=
handset.163.ldap.display_name=
handset.163.ldap.version=
handset.163.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 767 OF 1142
handset.163.ldap.ldap_sort= handset.163.ldap.tls_mode= handset.163.ldap.call_out_lookup= handset.163.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account164 Settings
##
##########################################################################
#############
account.164.enable=%BWLINE-BINARY-164% account.164.label=%BWEXTENSION-164% account.164.display_name=%BWCLID-164% account.164.auth_name=%BWAUTHUSER-164% account.164.user_name=%BWLINEPORT-164% account.164.password=%BWAUTHPASSWORD-164%
#W80B ADD account.164.sip_server.template = account.164.media_transmit.enable =
account.164.alarm.template = account.164.alarm.server = account.164.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.164.sip_server.1.failback_mode =
account.164.sip_server.1.failback_timeout =
account.164.sip_server.1.register_on_enable =
account.164.sip_server.1.failback_subscribe.enable =
account.164.sip_server.1.invite_retry_counts =
account.164.sip_server.1.only_signal_with_registered =
account.164.sip_server.2.failback_mode = account.164.sip_server.2.failback_timeout = account.164.sip_server.2.register_on_enable = account.164.sip_server.2.failback_subscribe.enable = account.164.sip_server.2.invite_retry_counts = account.164.sip_server.2.only_signal_with_registered =
account.164.naptr_build = account.164.fallback.redundancy_type = account.164.fallback.timeout =
account.164.dns_cache_type = account.164.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 768 OF 1142
account.164.anonymous_call = account.164.reject_anonymous_call = account.164.send_anonymous_code = account.164.anonymous_call_oncode = account.164.anonymous_call_offcode = account.164.send_anonymous_rejection_code = account.164.anonymous_reject_oncode = account.164.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.164.codec.g722.enable =
account.164.codec.g722.priority =
account.164.codec.g729.enable = account.164.codec.g729.priority =
account.164.codec.g726_16.enable = account.164.codec.g726_16.priority =
account.164.codec.g726_24.enable = account.164.codec.g726_24.priority =
account.164.codec.g726_32.enable = account.164.codec.g726_32.priority =
account.164.codec.g726_40.enable = account.164.codec.g726_40.priority =
account.164.codec.ilbc.enable = account.164.codec.ilbc.priority =
account.164.codec.pcmu.enable = account.164.codec.pcmu.priority =
account.164.codec.pcma.enable = account.164.codec.pcma.priority =
account.164.codec.opus.enable = account.164.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.164.nat.nat_traversal = account.164.nat.udp_update_enable = account.164.nat.udp_update_time = account.164.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 769 OF 1142
########################################################################## #############
account.164.blf.subscribe_period = account.164.dtmf.type = account.164.dtmf.dtmf_payload = account.164.dtmf.info_type = account.164.100rel_enable = account.164.subscribe_register = account.164.subscribe_mwi = account.164.subscribe_mwi_expires = account.164.subscribe_mwi_to_vm = voice_mail.number.164 = %BWVOICE-PORTAL-NUMBER-164% account.164.display_mwi.enable = account.164.cid_source = account.164.cid_source_privacy = account.164.cid_source_ppi = account.164.session_timer.enable = account.164.session_timer.expires = account.164.session_timer.refresher = account.164.enable_user_equal_phone = account.164.srtp_encryption = account.164.ptime = account.164.shared_line = %BWSHAREDLINE-BINARY-164% account.164.register_mac = account.164.register_line = account.164.reg_fail_retry_interval = account.164.reg_failed_retry_min_time = account.164.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.164.conf_type =
account.164.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-164%
account.164.sip_server_type = account.164.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.164.register_expires_overlap = account.164.subscribe_expires_overlap = account.164.auto_dial_enable = account.164.auto_dial_num = account.164.cp_source = account.164.transfer_refer_to_contact_header.enable = #V80 Add account.164.custom_ua = account.164.callpark_enable = account.164.check_cseq.enable = account.164.check_to_tag.enable = account.164.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 770 OF 1142
account.164.line_seize.expires = account.164.update_ack_while_dialing = account.164.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.164.always_fwd.enable =
account.164.always_fwd.target =
account.164.always_fwd.off_code =
account.164.always_fwd.on_code =
account.164.busy_fwd.enable =
account.164.busy_fwd.target =
account.164.busy_fwd.off_code =
account.164.busy_fwd.on_code =
account.164.timeout_fwd.enable =
account.164.timeout_fwd.target =
account.164.timeout_fwd.timeout =
account.164.timeout_fwd.off_code =
account.164.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.164.dnd.enable =
account.164.dnd.on_code =
account.164.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.164.reg.enable =
handset.164.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.164.xsi.user =%BWLOGIN-ID-164% account.164.xsi.password =%XSIPASSWORD-164% account.164.xsi.host =%XSP_ADDRESS% account.164.xsi.server_type = account.164.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 771 OF 1142
########################################################################## ############# handset.164.ldap.enable = handset.164.ldap.name_filter= handset.164.ldap.number_filter= handset.164.ldap.host= handset.164.ldap.port= handset.164.ldap.base= handset.164.ldap.user= handset.164.ldap.password= handset.164.ldap.max_hits= handset.164.ldap.name_attr= handset.164.ldap.numb_attr= handset.164.ldap.display_name= handset.164.ldap.version= handset.164.ldap.call_in_lookup= handset.164.ldap.ldap_sort= handset.164.ldap.tls_mode= handset.164.ldap.call_out_lookup= handset.164.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account165 Settings
##
##########################################################################
#############
account.165.enable=%BWLINE-BINARY-165% account.165.label=%BWEXTENSION-165% account.165.display_name=%BWCLID-165% account.165.auth_name=%BWAUTHUSER-165% account.165.user_name=%BWLINEPORT-165% account.165.password=%BWAUTHPASSWORD-165%
#W80B ADD account.165.sip_server.template = account.165.media_transmit.enable =
account.165.alarm.template = account.165.alarm.server = account.165.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.165.sip_server.1.failback_mode =
account.165.sip_server.1.failback_timeout =
account.165.sip_server.1.register_on_enable =
account.165.sip_server.1.failback_subscribe.enable =
account.165.sip_server.1.invite_retry_counts =
account.165.sip_server.1.only_signal_with_registered =
account.165.sip_server.2.failback_mode = account.165.sip_server.2.failback_timeout = account.165.sip_server.2.register_on_enable = account.165.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 772 OF 1142
account.165.sip_server.2.invite_retry_counts = account.165.sip_server.2.only_signal_with_registered =
account.165.naptr_build = account.165.fallback.redundancy_type = account.165.fallback.timeout =
account.165.dns_cache_type = account.165.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.165.anonymous_call =
account.165.reject_anonymous_call =
account.165.send_anonymous_code =
account.165.anonymous_call_oncode =
account.165.anonymous_call_offcode =
account.165.send_anonymous_rejection_code =
account.165.anonymous_reject_oncode =
account.165.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.165.codec.g722.enable =
account.165.codec.g722.priority =
account.165.codec.g729.enable = account.165.codec.g729.priority =
account.165.codec.g726_16.enable = account.165.codec.g726_16.priority =
account.165.codec.g726_24.enable = account.165.codec.g726_24.priority =
account.165.codec.g726_32.enable = account.165.codec.g726_32.priority =
account.165.codec.g726_40.enable = account.165.codec.g726_40.priority =
account.165.codec.ilbc.enable = account.165.codec.ilbc.priority =
account.165.codec.pcmu.enable = account.165.codec.pcmu.priority =
account.165.codec.pcma.enable = account.165.codec.pcma.priority =
account.165.codec.opus.enable = account.165.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 773 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.165.nat.nat_traversal = account.165.nat.udp_update_enable = account.165.nat.udp_update_time = account.165.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.165.blf.subscribe_period = account.165.dtmf.type = account.165.dtmf.dtmf_payload = account.165.dtmf.info_type = account.165.100rel_enable = account.165.subscribe_register = account.165.subscribe_mwi = account.165.subscribe_mwi_expires = account.165.subscribe_mwi_to_vm = voice_mail.number.165 = %BWVOICE-PORTAL-NUMBER-165% account.165.display_mwi.enable = account.165.cid_source = account.165.cid_source_privacy = account.165.cid_source_ppi = account.165.session_timer.enable = account.165.session_timer.expires = account.165.session_timer.refresher = account.165.enable_user_equal_phone = account.165.srtp_encryption = account.165.ptime = account.165.shared_line = %BWSHAREDLINE-BINARY-165% account.165.register_mac = account.165.register_line = account.165.reg_fail_retry_interval = account.165.reg_failed_retry_min_time = account.165.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.165.conf_type =
account.165.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-165%
account.165.sip_server_type = account.165.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 774 OF 1142
########################################################################## ############# ##DECT V81 Add
account.165.register_expires_overlap = account.165.subscribe_expires_overlap = account.165.auto_dial_enable = account.165.auto_dial_num = account.165.cp_source = account.165.transfer_refer_to_contact_header.enable = #V80 Add account.165.custom_ua = account.165.callpark_enable = account.165.check_cseq.enable = account.165.check_to_tag.enable = account.165.hold_use_inactive = account.165.line_seize.expires = account.165.update_ack_while_dialing = account.165.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.165.always_fwd.enable =
account.165.always_fwd.target =
account.165.always_fwd.off_code =
account.165.always_fwd.on_code =
account.165.busy_fwd.enable =
account.165.busy_fwd.target =
account.165.busy_fwd.off_code =
account.165.busy_fwd.on_code =
account.165.timeout_fwd.enable =
account.165.timeout_fwd.target =
account.165.timeout_fwd.timeout =
account.165.timeout_fwd.off_code =
account.165.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.165.dnd.enable =
account.165.dnd.on_code =
account.165.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.165.reg.enable =
handset.165.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 775 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.165.xsi.user =%BWLOGIN-ID-165% account.165.xsi.password =%XSIPASSWORD-165% account.165.xsi.host =%XSP_ADDRESS% account.165.xsi.server_type = account.165.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.165.ldap.enable =
handset.165.ldap.name_filter=
handset.165.ldap.number_filter=
handset.165.ldap.host=
handset.165.ldap.port=
handset.165.ldap.base=
handset.165.ldap.user=
handset.165.ldap.password=
handset.165.ldap.max_hits=
handset.165.ldap.name_attr=
handset.165.ldap.numb_attr=
handset.165.ldap.display_name=
handset.165.ldap.version=
handset.165.ldap.call_in_lookup=
handset.165.ldap.ldap_sort=
handset.165.ldap.tls_mode=
handset.165.ldap.call_out_lookup=
handset.165.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account166 Settings
##
##########################################################################
#############
account.166.enable=%BWLINE-BINARY-166% account.166.label=%BWEXTENSION-166% account.166.display_name=%BWCLID-166% account.166.auth_name=%BWAUTHUSER-166% account.166.user_name=%BWLINEPORT-166% account.166.password=%BWAUTHPASSWORD-166%
#W80B ADD account.166.sip_server.template = account.166.media_transmit.enable =
account.166.alarm.template = account.166.alarm.server = account.166.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 776 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.166.sip_server.1.failback_mode =
account.166.sip_server.1.failback_timeout =
account.166.sip_server.1.register_on_enable =
account.166.sip_server.1.failback_subscribe.enable =
account.166.sip_server.1.invite_retry_counts =
account.166.sip_server.1.only_signal_with_registered =
account.166.sip_server.2.failback_mode = account.166.sip_server.2.failback_timeout = account.166.sip_server.2.register_on_enable = account.166.sip_server.2.failback_subscribe.enable = account.166.sip_server.2.invite_retry_counts = account.166.sip_server.2.only_signal_with_registered =
account.166.naptr_build = account.166.fallback.redundancy_type = account.166.fallback.timeout =
account.166.dns_cache_type = account.166.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.166.anonymous_call =
account.166.reject_anonymous_call =
account.166.send_anonymous_code =
account.166.anonymous_call_oncode =
account.166.anonymous_call_offcode =
account.166.send_anonymous_rejection_code =
account.166.anonymous_reject_oncode =
account.166.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.166.codec.g722.enable =
account.166.codec.g722.priority =
account.166.codec.g729.enable = account.166.codec.g729.priority =
account.166.codec.g726_16.enable = account.166.codec.g726_16.priority =
account.166.codec.g726_24.enable = account.166.codec.g726_24.priority =
account.166.codec.g726_32.enable = account.166.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 777 OF 1142
account.166.codec.g726_40.enable = account.166.codec.g726_40.priority =
account.166.codec.ilbc.enable = account.166.codec.ilbc.priority =
account.166.codec.pcmu.enable = account.166.codec.pcmu.priority =
account.166.codec.pcma.enable = account.166.codec.pcma.priority =
account.166.codec.opus.enable = account.166.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.166.nat.nat_traversal = account.166.nat.udp_update_enable = account.166.nat.udp_update_time = account.166.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.166.blf.subscribe_period = account.166.dtmf.type = account.166.dtmf.dtmf_payload = account.166.dtmf.info_type = account.166.100rel_enable = account.166.subscribe_register = account.166.subscribe_mwi = account.166.subscribe_mwi_expires = account.166.subscribe_mwi_to_vm = voice_mail.number.166 = %BWVOICE-PORTAL-NUMBER-166% account.166.display_mwi.enable = account.166.cid_source = account.166.cid_source_privacy = account.166.cid_source_ppi = account.166.session_timer.enable = account.166.session_timer.expires = account.166.session_timer.refresher = account.166.enable_user_equal_phone = account.166.srtp_encryption = account.166.ptime = account.166.shared_line = %BWSHAREDLINE-BINARY-166% account.166.register_mac = account.166.register_line = account.166.reg_fail_retry_interval = account.166.reg_failed_retry_min_time = account.166.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 778 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.166.conf_type =
account.166.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-166%
account.166.sip_server_type = account.166.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.166.register_expires_overlap = account.166.subscribe_expires_overlap = account.166.auto_dial_enable = account.166.auto_dial_num = account.166.cp_source = account.166.transfer_refer_to_contact_header.enable = #V80 Add account.166.custom_ua = account.166.callpark_enable = account.166.check_cseq.enable = account.166.check_to_tag.enable = account.166.hold_use_inactive = account.166.line_seize.expires = account.166.update_ack_while_dialing = account.166.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.166.always_fwd.enable =
account.166.always_fwd.target =
account.166.always_fwd.off_code =
account.166.always_fwd.on_code =
account.166.busy_fwd.enable =
account.166.busy_fwd.target =
account.166.busy_fwd.off_code =
account.166.busy_fwd.on_code =
account.166.timeout_fwd.enable =
account.166.timeout_fwd.target =
account.166.timeout_fwd.timeout =
account.166.timeout_fwd.off_code =
account.166.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 779 OF 1142
account.166.dnd.enable = account.166.dnd.on_code = account.166.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.166.reg.enable =
handset.166.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.166.xsi.user =%BWLOGIN-ID-166% account.166.xsi.password =%XSIPASSWORD-166% account.166.xsi.host =%XSP_ADDRESS% account.166.xsi.server_type = account.166.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.166.ldap.enable =
handset.166.ldap.name_filter=
handset.166.ldap.number_filter=
handset.166.ldap.host=
handset.166.ldap.port=
handset.166.ldap.base=
handset.166.ldap.user=
handset.166.ldap.password=
handset.166.ldap.max_hits=
handset.166.ldap.name_attr=
handset.166.ldap.numb_attr=
handset.166.ldap.display_name=
handset.166.ldap.version=
handset.166.ldap.call_in_lookup=
handset.166.ldap.ldap_sort=
handset.166.ldap.tls_mode=
handset.166.ldap.call_out_lookup=
handset.166.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account167 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 780 OF 1142
account.167.enable=%BWLINE-BINARY-167% account.167.label=%BWEXTENSION-167% account.167.display_name=%BWCLID-167% account.167.auth_name=%BWAUTHUSER-167% account.167.user_name=%BWLINEPORT-167% account.167.password=%BWAUTHPASSWORD-167%
#W80B ADD account.167.sip_server.template = account.167.media_transmit.enable =
account.167.alarm.template = account.167.alarm.server = account.167.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.167.sip_server.1.failback_mode =
account.167.sip_server.1.failback_timeout =
account.167.sip_server.1.register_on_enable =
account.167.sip_server.1.failback_subscribe.enable =
account.167.sip_server.1.invite_retry_counts =
account.167.sip_server.1.only_signal_with_registered =
account.167.sip_server.2.failback_mode = account.167.sip_server.2.failback_timeout = account.167.sip_server.2.register_on_enable = account.167.sip_server.2.failback_subscribe.enable = account.167.sip_server.2.invite_retry_counts = account.167.sip_server.2.only_signal_with_registered =
account.167.naptr_build = account.167.fallback.redundancy_type = account.167.fallback.timeout =
account.167.dns_cache_type = account.167.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.167.anonymous_call =
account.167.reject_anonymous_call =
account.167.send_anonymous_code =
account.167.anonymous_call_oncode =
account.167.anonymous_call_offcode =
account.167.send_anonymous_rejection_code =
account.167.anonymous_reject_oncode =
account.167.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 781 OF 1142
########################################################################## ############# account.167.codec.g722.enable = account.167.codec.g722.priority =
account.167.codec.g729.enable = account.167.codec.g729.priority =
account.167.codec.g726_16.enable = account.167.codec.g726_16.priority =
account.167.codec.g726_24.enable = account.167.codec.g726_24.priority =
account.167.codec.g726_32.enable = account.167.codec.g726_32.priority =
account.167.codec.g726_40.enable = account.167.codec.g726_40.priority =
account.167.codec.ilbc.enable = account.167.codec.ilbc.priority =
account.167.codec.pcmu.enable = account.167.codec.pcmu.priority =
account.167.codec.pcma.enable = account.167.codec.pcma.priority =
account.167.codec.opus.enable = account.167.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.167.nat.nat_traversal = account.167.nat.udp_update_enable = account.167.nat.udp_update_time = account.167.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.167.blf.subscribe_period = account.167.dtmf.type = account.167.dtmf.dtmf_payload = account.167.dtmf.info_type = account.167.100rel_enable = account.167.subscribe_register = account.167.subscribe_mwi = account.167.subscribe_mwi_expires = account.167.subscribe_mwi_to_vm = voice_mail.number.167 = %BWVOICE-PORTAL-NUMBER-167% account.167.display_mwi.enable = account.167.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 782 OF 1142
account.167.cid_source_privacy = account.167.cid_source_ppi = account.167.session_timer.enable = account.167.session_timer.expires = account.167.session_timer.refresher = account.167.enable_user_equal_phone = account.167.srtp_encryption = account.167.ptime = account.167.shared_line = %BWSHAREDLINE-BINARY-167% account.167.register_mac = account.167.register_line = account.167.reg_fail_retry_interval = account.167.reg_failed_retry_min_time = account.167.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.167.conf_type =
account.167.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-167%
account.167.sip_server_type = account.167.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.167.register_expires_overlap = account.167.subscribe_expires_overlap = account.167.auto_dial_enable = account.167.auto_dial_num = account.167.cp_source = account.167.transfer_refer_to_contact_header.enable = #V80 Add account.167.custom_ua = account.167.callpark_enable = account.167.check_cseq.enable = account.167.check_to_tag.enable = account.167.hold_use_inactive = account.167.line_seize.expires = account.167.update_ack_while_dialing = account.167.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.167.always_fwd.enable =
account.167.always_fwd.target =
account.167.always_fwd.off_code =
account.167.always_fwd.on_code =
account.167.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 783 OF 1142
account.167.busy_fwd.target = account.167.busy_fwd.off_code = account.167.busy_fwd.on_code = account.167.timeout_fwd.enable = account.167.timeout_fwd.target = account.167.timeout_fwd.timeout = account.167.timeout_fwd.off_code = account.167.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.167.dnd.enable =
account.167.dnd.on_code =
account.167.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.167.reg.enable =
handset.167.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.167.xsi.user =%BWLOGIN-ID-167% account.167.xsi.password =%XSIPASSWORD-167% account.167.xsi.host =%XSP_ADDRESS% account.167.xsi.server_type = account.167.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.167.ldap.enable =
handset.167.ldap.name_filter=
handset.167.ldap.number_filter=
handset.167.ldap.host=
handset.167.ldap.port=
handset.167.ldap.base=
handset.167.ldap.user=
handset.167.ldap.password=
handset.167.ldap.max_hits=
handset.167.ldap.name_attr=
handset.167.ldap.numb_attr=
handset.167.ldap.display_name=
handset.167.ldap.version=
handset.167.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 784 OF 1142
handset.167.ldap.ldap_sort= handset.167.ldap.tls_mode= handset.167.ldap.call_out_lookup= handset.167.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account168 Settings
##
##########################################################################
#############
account.168.enable=%BWLINE-BINARY-168% account.168.label=%BWEXTENSION-168% account.168.display_name=%BWCLID-168% account.168.auth_name=%BWAUTHUSER-168% account.168.user_name=%BWLINEPORT-168% account.168.password=%BWAUTHPASSWORD-168%
#W80B ADD account.168.sip_server.template = account.168.media_transmit.enable =
account.168.alarm.template = account.168.alarm.server = account.168.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.168.sip_server.1.failback_mode =
account.168.sip_server.1.failback_timeout =
account.168.sip_server.1.register_on_enable =
account.168.sip_server.1.failback_subscribe.enable =
account.168.sip_server.1.invite_retry_counts =
account.168.sip_server.1.only_signal_with_registered =
account.168.sip_server.2.failback_mode = account.168.sip_server.2.failback_timeout = account.168.sip_server.2.register_on_enable = account.168.sip_server.2.failback_subscribe.enable = account.168.sip_server.2.invite_retry_counts = account.168.sip_server.2.only_signal_with_registered =
account.168.naptr_build = account.168.fallback.redundancy_type = account.168.fallback.timeout =
account.168.dns_cache_type = account.168.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 785 OF 1142
account.168.anonymous_call = account.168.reject_anonymous_call = account.168.send_anonymous_code = account.168.anonymous_call_oncode = account.168.anonymous_call_offcode = account.168.send_anonymous_rejection_code = account.168.anonymous_reject_oncode = account.168.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.168.codec.g722.enable =
account.168.codec.g722.priority =
account.168.codec.g729.enable = account.168.codec.g729.priority =
account.168.codec.g726_16.enable = account.168.codec.g726_16.priority =
account.168.codec.g726_24.enable = account.168.codec.g726_24.priority =
account.168.codec.g726_32.enable = account.168.codec.g726_32.priority =
account.168.codec.g726_40.enable = account.168.codec.g726_40.priority =
account.168.codec.ilbc.enable = account.168.codec.ilbc.priority =
account.168.codec.pcmu.enable = account.168.codec.pcmu.priority =
account.168.codec.pcma.enable = account.168.codec.pcma.priority =
account.168.codec.opus.enable = account.168.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.168.nat.nat_traversal = account.168.nat.udp_update_enable = account.168.nat.udp_update_time = account.168.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 786 OF 1142
########################################################################## #############
account.168.blf.subscribe_period = account.168.dtmf.type = account.168.dtmf.dtmf_payload = account.168.dtmf.info_type = account.168.100rel_enable = account.168.subscribe_register = account.168.subscribe_mwi = account.168.subscribe_mwi_expires = account.168.subscribe_mwi_to_vm = voice_mail.number.168 = %BWVOICE-PORTAL-NUMBER-168% account.168.display_mwi.enable = account.168.cid_source = account.168.cid_source_privacy = account.168.cid_source_ppi = account.168.session_timer.enable = account.168.session_timer.expires = account.168.session_timer.refresher = account.168.enable_user_equal_phone = account.168.srtp_encryption = account.168.ptime = account.168.shared_line = %BWSHAREDLINE-BINARY-168% account.168.register_mac = account.168.register_line = account.168.reg_fail_retry_interval = account.168.reg_failed_retry_min_time = account.168.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.168.conf_type =
account.168.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-168%
account.168.sip_server_type = account.168.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.168.register_expires_overlap = account.168.subscribe_expires_overlap = account.168.auto_dial_enable = account.168.auto_dial_num = account.168.cp_source = account.168.transfer_refer_to_contact_header.enable = #V80 Add account.168.custom_ua = account.168.callpark_enable = account.168.check_cseq.enable = account.168.check_to_tag.enable = account.168.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 787 OF 1142
account.168.line_seize.expires = account.168.update_ack_while_dialing = account.168.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.168.always_fwd.enable =
account.168.always_fwd.target =
account.168.always_fwd.off_code =
account.168.always_fwd.on_code =
account.168.busy_fwd.enable =
account.168.busy_fwd.target =
account.168.busy_fwd.off_code =
account.168.busy_fwd.on_code =
account.168.timeout_fwd.enable =
account.168.timeout_fwd.target =
account.168.timeout_fwd.timeout =
account.168.timeout_fwd.off_code =
account.168.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.168.dnd.enable =
account.168.dnd.on_code =
account.168.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.168.reg.enable =
handset.168.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.168.xsi.user =%BWLOGIN-ID-168% account.168.xsi.password =%XSIPASSWORD-168% account.168.xsi.host =%XSP_ADDRESS% account.168.xsi.server_type = account.168.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 788 OF 1142
########################################################################## ############# handset.168.ldap.enable = handset.168.ldap.name_filter= handset.168.ldap.number_filter= handset.168.ldap.host= handset.168.ldap.port= handset.168.ldap.base= handset.168.ldap.user= handset.168.ldap.password= handset.168.ldap.max_hits= handset.168.ldap.name_attr= handset.168.ldap.numb_attr= handset.168.ldap.display_name= handset.168.ldap.version= handset.168.ldap.call_in_lookup= handset.168.ldap.ldap_sort= handset.168.ldap.tls_mode= handset.168.ldap.call_out_lookup= handset.168.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account169 Settings
##
##########################################################################
#############
account.169.enable=%BWLINE-BINARY-169% account.169.label=%BWEXTENSION-169% account.169.display_name=%BWCLID-169% account.169.auth_name=%BWAUTHUSER-169% account.169.user_name=%BWLINEPORT-169% account.169.password=%BWAUTHPASSWORD-169%
#W80B ADD account.169.sip_server.template = account.169.media_transmit.enable =
account.169.alarm.template = account.169.alarm.server = account.169.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.169.sip_server.1.failback_mode =
account.169.sip_server.1.failback_timeout =
account.169.sip_server.1.register_on_enable =
account.169.sip_server.1.failback_subscribe.enable =
account.169.sip_server.1.invite_retry_counts =
account.169.sip_server.1.only_signal_with_registered =
account.169.sip_server.2.failback_mode = account.169.sip_server.2.failback_timeout = account.169.sip_server.2.register_on_enable = account.169.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 789 OF 1142
account.169.sip_server.2.invite_retry_counts = account.169.sip_server.2.only_signal_with_registered =
account.169.naptr_build = account.169.fallback.redundancy_type = account.169.fallback.timeout =
account.169.dns_cache_type = account.169.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.169.anonymous_call =
account.169.reject_anonymous_call =
account.169.send_anonymous_code =
account.169.anonymous_call_oncode =
account.169.anonymous_call_offcode =
account.169.send_anonymous_rejection_code =
account.169.anonymous_reject_oncode =
account.169.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.169.codec.g722.enable =
account.169.codec.g722.priority =
account.169.codec.g729.enable = account.169.codec.g729.priority =
account.169.codec.g726_16.enable = account.169.codec.g726_16.priority =
account.169.codec.g726_24.enable = account.169.codec.g726_24.priority =
account.169.codec.g726_32.enable = account.169.codec.g726_32.priority =
account.169.codec.g726_40.enable = account.169.codec.g726_40.priority =
account.169.codec.ilbc.enable = account.169.codec.ilbc.priority =
account.169.codec.pcmu.enable = account.169.codec.pcmu.priority =
account.169.codec.pcma.enable = account.169.codec.pcma.priority =
account.169.codec.opus.enable = account.169.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 790 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.169.nat.nat_traversal = account.169.nat.udp_update_enable = account.169.nat.udp_update_time = account.169.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.169.blf.subscribe_period = account.169.dtmf.type = account.169.dtmf.dtmf_payload = account.169.dtmf.info_type = account.169.100rel_enable = account.169.subscribe_register = account.169.subscribe_mwi = account.169.subscribe_mwi_expires = account.169.subscribe_mwi_to_vm = voice_mail.number.169 = %BWVOICE-PORTAL-NUMBER-169% account.169.display_mwi.enable = account.169.cid_source = account.169.cid_source_privacy = account.169.cid_source_ppi = account.169.session_timer.enable = account.169.session_timer.expires = account.169.session_timer.refresher = account.169.enable_user_equal_phone = account.169.srtp_encryption = account.169.ptime = account.169.shared_line = %BWSHAREDLINE-BINARY-169% account.169.register_mac = account.169.register_line = account.169.reg_fail_retry_interval = account.169.reg_failed_retry_min_time = account.169.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.169.conf_type =
account.169.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-169%
account.169.sip_server_type = account.169.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 791 OF 1142
########################################################################## ############# ##DECT V81 Add
account.169.register_expires_overlap = account.169.subscribe_expires_overlap = account.169.auto_dial_enable = account.169.auto_dial_num = account.169.cp_source = account.169.transfer_refer_to_contact_header.enable = #V80 Add account.169.custom_ua = account.169.callpark_enable = account.169.check_cseq.enable = account.169.check_to_tag.enable = account.169.hold_use_inactive = account.169.line_seize.expires = account.169.update_ack_while_dialing = account.169.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.169.always_fwd.enable =
account.169.always_fwd.target =
account.169.always_fwd.off_code =
account.169.always_fwd.on_code =
account.169.busy_fwd.enable =
account.169.busy_fwd.target =
account.169.busy_fwd.off_code =
account.169.busy_fwd.on_code =
account.169.timeout_fwd.enable =
account.169.timeout_fwd.target =
account.169.timeout_fwd.timeout =
account.169.timeout_fwd.off_code =
account.169.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.169.dnd.enable =
account.169.dnd.on_code =
account.169.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.169.reg.enable =
handset.169.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 792 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.169.xsi.user =%BWLOGIN-ID-169% account.169.xsi.password =%XSIPASSWORD-169% account.169.xsi.host =%XSP_ADDRESS% account.169.xsi.server_type = account.169.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.169.ldap.enable =
handset.169.ldap.name_filter=
handset.169.ldap.number_filter=
handset.169.ldap.host=
handset.169.ldap.port=
handset.169.ldap.base=
handset.169.ldap.user=
handset.169.ldap.password=
handset.169.ldap.max_hits=
handset.169.ldap.name_attr=
handset.169.ldap.numb_attr=
handset.169.ldap.display_name=
handset.169.ldap.version=
handset.169.ldap.call_in_lookup=
handset.169.ldap.ldap_sort=
handset.169.ldap.tls_mode=
handset.169.ldap.call_out_lookup=
handset.169.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account170 Settings
##
##########################################################################
#############
account.170.enable=%BWLINE-BINARY-170% account.170.label=%BWEXTENSION-170% account.170.display_name=%BWCLID-170% account.170.auth_name=%BWAUTHUSER-170% account.170.user_name=%BWLINEPORT-170% account.170.password=%BWAUTHPASSWORD-170%
#W80B ADD account.170.sip_server.template = account.170.media_transmit.enable =
account.170.alarm.template = account.170.alarm.server = account.170.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 793 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.170.sip_server.1.failback_mode =
account.170.sip_server.1.failback_timeout =
account.170.sip_server.1.register_on_enable =
account.170.sip_server.1.failback_subscribe.enable =
account.170.sip_server.1.invite_retry_counts =
account.170.sip_server.1.only_signal_with_registered =
account.170.sip_server.2.failback_mode = account.170.sip_server.2.failback_timeout = account.170.sip_server.2.register_on_enable = account.170.sip_server.2.failback_subscribe.enable = account.170.sip_server.2.invite_retry_counts = account.170.sip_server.2.only_signal_with_registered =
account.170.naptr_build = account.170.fallback.redundancy_type = account.170.fallback.timeout =
account.170.dns_cache_type = account.170.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.170.anonymous_call =
account.170.reject_anonymous_call =
account.170.send_anonymous_code =
account.170.anonymous_call_oncode =
account.170.anonymous_call_offcode =
account.170.send_anonymous_rejection_code =
account.170.anonymous_reject_oncode =
account.170.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.170.codec.g722.enable =
account.170.codec.g722.priority =
account.170.codec.g729.enable = account.170.codec.g729.priority =
account.170.codec.g726_16.enable = account.170.codec.g726_16.priority =
account.170.codec.g726_24.enable = account.170.codec.g726_24.priority =
account.170.codec.g726_32.enable = account.170.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 794 OF 1142
account.170.codec.g726_40.enable = account.170.codec.g726_40.priority =
account.170.codec.ilbc.enable = account.170.codec.ilbc.priority =
account.170.codec.pcmu.enable = account.170.codec.pcmu.priority =
account.170.codec.pcma.enable = account.170.codec.pcma.priority =
account.170.codec.opus.enable = account.170.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.170.nat.nat_traversal = account.170.nat.udp_update_enable = account.170.nat.udp_update_time = account.170.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.170.blf.subscribe_period = account.170.dtmf.type = account.170.dtmf.dtmf_payload = account.170.dtmf.info_type = account.170.100rel_enable = account.170.subscribe_register = account.170.subscribe_mwi = account.170.subscribe_mwi_expires = account.170.subscribe_mwi_to_vm = voice_mail.number.170 = %BWVOICE-PORTAL-NUMBER-170% account.170.display_mwi.enable = account.170.cid_source = account.170.cid_source_privacy = account.170.cid_source_ppi = account.170.session_timer.enable = account.170.session_timer.expires = account.170.session_timer.refresher = account.170.enable_user_equal_phone = account.170.srtp_encryption = account.170.ptime = account.170.shared_line = %BWSHAREDLINE-BINARY-170% account.170.register_mac = account.170.register_line = account.170.reg_fail_retry_interval = account.170.reg_failed_retry_min_time = account.170.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 795 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.170.conf_type =
account.170.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-170%
account.170.sip_server_type = account.170.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.170.register_expires_overlap = account.170.subscribe_expires_overlap = account.170.auto_dial_enable = account.170.auto_dial_num = account.170.cp_source = account.170.transfer_refer_to_contact_header.enable = #V80 Add account.170.custom_ua = account.170.callpark_enable = account.170.check_cseq.enable = account.170.check_to_tag.enable = account.170.hold_use_inactive = account.170.line_seize.expires = account.170.update_ack_while_dialing = account.170.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.170.always_fwd.enable =
account.170.always_fwd.target =
account.170.always_fwd.off_code =
account.170.always_fwd.on_code =
account.170.busy_fwd.enable =
account.170.busy_fwd.target =
account.170.busy_fwd.off_code =
account.170.busy_fwd.on_code =
account.170.timeout_fwd.enable =
account.170.timeout_fwd.target =
account.170.timeout_fwd.timeout =
account.170.timeout_fwd.off_code =
account.170.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 796 OF 1142
account.170.dnd.enable = account.170.dnd.on_code = account.170.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.170.reg.enable =
handset.170.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.170.xsi.user =%BWLOGIN-ID-170% account.170.xsi.password =%XSIPASSWORD-170% account.170.xsi.host =%XSP_ADDRESS% account.170.xsi.server_type = account.170.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.170.ldap.enable =
handset.170.ldap.name_filter=
handset.170.ldap.number_filter=
handset.170.ldap.host=
handset.170.ldap.port=
handset.170.ldap.base=
handset.170.ldap.user=
handset.170.ldap.password=
handset.170.ldap.max_hits=
handset.170.ldap.name_attr=
handset.170.ldap.numb_attr=
handset.170.ldap.display_name=
handset.170.ldap.version=
handset.170.ldap.call_in_lookup=
handset.170.ldap.ldap_sort=
handset.170.ldap.tls_mode=
handset.170.ldap.call_out_lookup=
handset.170.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account171 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 797 OF 1142
account.171.enable=%BWLINE-BINARY-171% account.171.label=%BWEXTENSION-171% account.171.display_name=%BWCLID-171% account.171.auth_name=%BWAUTHUSER-171% account.171.user_name=%BWLINEPORT-171% account.171.password=%BWAUTHPASSWORD-171%
#W80B ADD account.171.sip_server.template = account.171.media_transmit.enable =
account.171.alarm.template = account.171.alarm.server = account.171.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.171.sip_server.1.failback_mode =
account.171.sip_server.1.failback_timeout =
account.171.sip_server.1.register_on_enable =
account.171.sip_server.1.failback_subscribe.enable =
account.171.sip_server.1.invite_retry_counts =
account.171.sip_server.1.only_signal_with_registered =
account.171.sip_server.2.failback_mode = account.171.sip_server.2.failback_timeout = account.171.sip_server.2.register_on_enable = account.171.sip_server.2.failback_subscribe.enable = account.171.sip_server.2.invite_retry_counts = account.171.sip_server.2.only_signal_with_registered =
account.171.naptr_build = account.171.fallback.redundancy_type = account.171.fallback.timeout =
account.171.dns_cache_type = account.171.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.171.anonymous_call =
account.171.reject_anonymous_call =
account.171.send_anonymous_code =
account.171.anonymous_call_oncode =
account.171.anonymous_call_offcode =
account.171.send_anonymous_rejection_code =
account.171.anonymous_reject_oncode =
account.171.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 798 OF 1142
########################################################################## ############# account.171.codec.g722.enable = account.171.codec.g722.priority =
account.171.codec.g729.enable = account.171.codec.g729.priority =
account.171.codec.g726_16.enable = account.171.codec.g726_16.priority =
account.171.codec.g726_24.enable = account.171.codec.g726_24.priority =
account.171.codec.g726_32.enable = account.171.codec.g726_32.priority =
account.171.codec.g726_40.enable = account.171.codec.g726_40.priority =
account.171.codec.ilbc.enable = account.171.codec.ilbc.priority =
account.171.codec.pcmu.enable = account.171.codec.pcmu.priority =
account.171.codec.pcma.enable = account.171.codec.pcma.priority =
account.171.codec.opus.enable = account.171.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.171.nat.nat_traversal = account.171.nat.udp_update_enable = account.171.nat.udp_update_time = account.171.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.171.blf.subscribe_period = account.171.dtmf.type = account.171.dtmf.dtmf_payload = account.171.dtmf.info_type = account.171.100rel_enable = account.171.subscribe_register = account.171.subscribe_mwi = account.171.subscribe_mwi_expires = account.171.subscribe_mwi_to_vm = voice_mail.number.171 = %BWVOICE-PORTAL-NUMBER-171% account.171.display_mwi.enable = account.171.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 799 OF 1142
account.171.cid_source_privacy = account.171.cid_source_ppi = account.171.session_timer.enable = account.171.session_timer.expires = account.171.session_timer.refresher = account.171.enable_user_equal_phone = account.171.srtp_encryption = account.171.ptime = account.171.shared_line = %BWSHAREDLINE-BINARY-171% account.171.register_mac = account.171.register_line = account.171.reg_fail_retry_interval = account.171.reg_failed_retry_min_time = account.171.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.171.conf_type =
account.171.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-171%
account.171.sip_server_type = account.171.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.171.register_expires_overlap = account.171.subscribe_expires_overlap = account.171.auto_dial_enable = account.171.auto_dial_num = account.171.cp_source = account.171.transfer_refer_to_contact_header.enable = #V80 Add account.171.custom_ua = account.171.callpark_enable = account.171.check_cseq.enable = account.171.check_to_tag.enable = account.171.hold_use_inactive = account.171.line_seize.expires = account.171.update_ack_while_dialing = account.171.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.171.always_fwd.enable =
account.171.always_fwd.target =
account.171.always_fwd.off_code =
account.171.always_fwd.on_code =
account.171.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 800 OF 1142
account.171.busy_fwd.target = account.171.busy_fwd.off_code = account.171.busy_fwd.on_code = account.171.timeout_fwd.enable = account.171.timeout_fwd.target = account.171.timeout_fwd.timeout = account.171.timeout_fwd.off_code = account.171.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.171.dnd.enable =
account.171.dnd.on_code =
account.171.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.171.reg.enable =
handset.171.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.171.xsi.user =%BWLOGIN-ID-171% account.171.xsi.password =%XSIPASSWORD-171% account.171.xsi.host =%XSP_ADDRESS% account.171.xsi.server_type = account.171.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.171.ldap.enable =
handset.171.ldap.name_filter=
handset.171.ldap.number_filter=
handset.171.ldap.host=
handset.171.ldap.port=
handset.171.ldap.base=
handset.171.ldap.user=
handset.171.ldap.password=
handset.171.ldap.max_hits=
handset.171.ldap.name_attr=
handset.171.ldap.numb_attr=
handset.171.ldap.display_name=
handset.171.ldap.version=
handset.171.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 801 OF 1142
handset.171.ldap.ldap_sort= handset.171.ldap.tls_mode= handset.171.ldap.call_out_lookup= handset.171.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account172 Settings
##
##########################################################################
#############
account.172.enable=%BWLINE-BINARY-172% account.172.label=%BWEXTENSION-172% account.172.display_name=%BWCLID-172% account.172.auth_name=%BWAUTHUSER-172% account.172.user_name=%BWLINEPORT-172% account.172.password=%BWAUTHPASSWORD-172%
#W80B ADD account.172.sip_server.template = account.172.media_transmit.enable =
account.172.alarm.template = account.172.alarm.server = account.172.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.172.sip_server.1.failback_mode =
account.172.sip_server.1.failback_timeout =
account.172.sip_server.1.register_on_enable =
account.172.sip_server.1.failback_subscribe.enable =
account.172.sip_server.1.invite_retry_counts =
account.172.sip_server.1.only_signal_with_registered =
account.172.sip_server.2.failback_mode = account.172.sip_server.2.failback_timeout = account.172.sip_server.2.register_on_enable = account.172.sip_server.2.failback_subscribe.enable = account.172.sip_server.2.invite_retry_counts = account.172.sip_server.2.only_signal_with_registered =
account.172.naptr_build = account.172.fallback.redundancy_type = account.172.fallback.timeout =
account.172.dns_cache_type = account.172.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 802 OF 1142
account.172.anonymous_call = account.172.reject_anonymous_call = account.172.send_anonymous_code = account.172.anonymous_call_oncode = account.172.anonymous_call_offcode = account.172.send_anonymous_rejection_code = account.172.anonymous_reject_oncode = account.172.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.172.codec.g722.enable =
account.172.codec.g722.priority =
account.172.codec.g729.enable = account.172.codec.g729.priority =
account.172.codec.g726_16.enable = account.172.codec.g726_16.priority =
account.172.codec.g726_24.enable = account.172.codec.g726_24.priority =
account.172.codec.g726_32.enable = account.172.codec.g726_32.priority =
account.172.codec.g726_40.enable = account.172.codec.g726_40.priority =
account.172.codec.ilbc.enable = account.172.codec.ilbc.priority =
account.172.codec.pcmu.enable = account.172.codec.pcmu.priority =
account.172.codec.pcma.enable = account.172.codec.pcma.priority =
account.172.codec.opus.enable = account.172.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.172.nat.nat_traversal = account.172.nat.udp_update_enable = account.172.nat.udp_update_time = account.172.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 803 OF 1142
########################################################################## #############
account.172.blf.subscribe_period = account.172.dtmf.type = account.172.dtmf.dtmf_payload = account.172.dtmf.info_type = account.172.100rel_enable = account.172.subscribe_register = account.172.subscribe_mwi = account.172.subscribe_mwi_expires = account.172.subscribe_mwi_to_vm = voice_mail.number.172 = %BWVOICE-PORTAL-NUMBER-172% account.172.display_mwi.enable = account.172.cid_source = account.172.cid_source_privacy = account.172.cid_source_ppi = account.172.session_timer.enable = account.172.session_timer.expires = account.172.session_timer.refresher = account.172.enable_user_equal_phone = account.172.srtp_encryption = account.172.ptime = account.172.shared_line = %BWSHAREDLINE-BINARY-172% account.172.register_mac = account.172.register_line = account.172.reg_fail_retry_interval = account.172.reg_failed_retry_min_time = account.172.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.172.conf_type =
account.172.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-172%
account.172.sip_server_type = account.172.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.172.register_expires_overlap = account.172.subscribe_expires_overlap = account.172.auto_dial_enable = account.172.auto_dial_num = account.172.cp_source = account.172.transfer_refer_to_contact_header.enable = #V80 Add account.172.custom_ua = account.172.callpark_enable = account.172.check_cseq.enable = account.172.check_to_tag.enable = account.172.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 804 OF 1142
account.172.line_seize.expires = account.172.update_ack_while_dialing = account.172.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.172.always_fwd.enable =
account.172.always_fwd.target =
account.172.always_fwd.off_code =
account.172.always_fwd.on_code =
account.172.busy_fwd.enable =
account.172.busy_fwd.target =
account.172.busy_fwd.off_code =
account.172.busy_fwd.on_code =
account.172.timeout_fwd.enable =
account.172.timeout_fwd.target =
account.172.timeout_fwd.timeout =
account.172.timeout_fwd.off_code =
account.172.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.172.dnd.enable =
account.172.dnd.on_code =
account.172.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.172.reg.enable =
handset.172.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.172.xsi.user =%BWLOGIN-ID-172% account.172.xsi.password =%XSIPASSWORD-172% account.172.xsi.host =%XSP_ADDRESS% account.172.xsi.server_type = account.172.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 805 OF 1142
########################################################################## ############# handset.172.ldap.enable = handset.172.ldap.name_filter= handset.172.ldap.number_filter= handset.172.ldap.host= handset.172.ldap.port= handset.172.ldap.base= handset.172.ldap.user= handset.172.ldap.password= handset.172.ldap.max_hits= handset.172.ldap.name_attr= handset.172.ldap.numb_attr= handset.172.ldap.display_name= handset.172.ldap.version= handset.172.ldap.call_in_lookup= handset.172.ldap.ldap_sort= handset.172.ldap.tls_mode= handset.172.ldap.call_out_lookup= handset.172.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account173 Settings
##
##########################################################################
#############
account.173.enable=%BWLINE-BINARY-173% account.173.label=%BWEXTENSION-173% account.173.display_name=%BWCLID-173% account.173.auth_name=%BWAUTHUSER-173% account.173.user_name=%BWLINEPORT-173% account.173.password=%BWAUTHPASSWORD-173%
#W80B ADD account.173.sip_server.template = account.173.media_transmit.enable =
account.173.alarm.template = account.173.alarm.server = account.173.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.173.sip_server.1.failback_mode =
account.173.sip_server.1.failback_timeout =
account.173.sip_server.1.register_on_enable =
account.173.sip_server.1.failback_subscribe.enable =
account.173.sip_server.1.invite_retry_counts =
account.173.sip_server.1.only_signal_with_registered =
account.173.sip_server.2.failback_mode = account.173.sip_server.2.failback_timeout = account.173.sip_server.2.register_on_enable = account.173.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 806 OF 1142
account.173.sip_server.2.invite_retry_counts = account.173.sip_server.2.only_signal_with_registered =
account.173.naptr_build = account.173.fallback.redundancy_type = account.173.fallback.timeout =
account.173.dns_cache_type = account.173.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.173.anonymous_call =
account.173.reject_anonymous_call =
account.173.send_anonymous_code =
account.173.anonymous_call_oncode =
account.173.anonymous_call_offcode =
account.173.send_anonymous_rejection_code =
account.173.anonymous_reject_oncode =
account.173.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.173.codec.g722.enable =
account.173.codec.g722.priority =
account.173.codec.g729.enable = account.173.codec.g729.priority =
account.173.codec.g726_16.enable = account.173.codec.g726_16.priority =
account.173.codec.g726_24.enable = account.173.codec.g726_24.priority =
account.173.codec.g726_32.enable = account.173.codec.g726_32.priority =
account.173.codec.g726_40.enable = account.173.codec.g726_40.priority =
account.173.codec.ilbc.enable = account.173.codec.ilbc.priority =
account.173.codec.pcmu.enable = account.173.codec.pcmu.priority =
account.173.codec.pcma.enable = account.173.codec.pcma.priority =
account.173.codec.opus.enable = account.173.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 807 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.173.nat.nat_traversal = account.173.nat.udp_update_enable = account.173.nat.udp_update_time = account.173.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.173.blf.subscribe_period = account.173.dtmf.type = account.173.dtmf.dtmf_payload = account.173.dtmf.info_type = account.173.100rel_enable = account.173.subscribe_register = account.173.subscribe_mwi = account.173.subscribe_mwi_expires = account.173.subscribe_mwi_to_vm = voice_mail.number.173 = %BWVOICE-PORTAL-NUMBER-173% account.173.display_mwi.enable = account.173.cid_source = account.173.cid_source_privacy = account.173.cid_source_ppi = account.173.session_timer.enable = account.173.session_timer.expires = account.173.session_timer.refresher = account.173.enable_user_equal_phone = account.173.srtp_encryption = account.173.ptime = account.173.shared_line = %BWSHAREDLINE-BINARY-173% account.173.register_mac = account.173.register_line = account.173.reg_fail_retry_interval = account.173.reg_failed_retry_min_time = account.173.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.173.conf_type =
account.173.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-173%
account.173.sip_server_type = account.173.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 808 OF 1142
########################################################################## ############# ##DECT V81 Add
account.173.register_expires_overlap = account.173.subscribe_expires_overlap = account.173.auto_dial_enable = account.173.auto_dial_num = account.173.cp_source = account.173.transfer_refer_to_contact_header.enable = #V80 Add account.173.custom_ua = account.173.callpark_enable = account.173.check_cseq.enable = account.173.check_to_tag.enable = account.173.hold_use_inactive = account.173.line_seize.expires = account.173.update_ack_while_dialing = account.173.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.173.always_fwd.enable =
account.173.always_fwd.target =
account.173.always_fwd.off_code =
account.173.always_fwd.on_code =
account.173.busy_fwd.enable =
account.173.busy_fwd.target =
account.173.busy_fwd.off_code =
account.173.busy_fwd.on_code =
account.173.timeout_fwd.enable =
account.173.timeout_fwd.target =
account.173.timeout_fwd.timeout =
account.173.timeout_fwd.off_code =
account.173.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.173.dnd.enable =
account.173.dnd.on_code =
account.173.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.173.reg.enable =
handset.173.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 809 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.173.xsi.user =%BWLOGIN-ID-173% account.173.xsi.password =%XSIPASSWORD-173% account.173.xsi.host =%XSP_ADDRESS% account.173.xsi.server_type = account.173.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.173.ldap.enable =
handset.173.ldap.name_filter=
handset.173.ldap.number_filter=
handset.173.ldap.host=
handset.173.ldap.port=
handset.173.ldap.base=
handset.173.ldap.user=
handset.173.ldap.password=
handset.173.ldap.max_hits=
handset.173.ldap.name_attr=
handset.173.ldap.numb_attr=
handset.173.ldap.display_name=
handset.173.ldap.version=
handset.173.ldap.call_in_lookup=
handset.173.ldap.ldap_sort=
handset.173.ldap.tls_mode=
handset.173.ldap.call_out_lookup=
handset.173.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account174 Settings
##
##########################################################################
#############
account.174.enable=%BWLINE-BINARY-174% account.174.label=%BWEXTENSION-174% account.174.display_name=%BWCLID-174% account.174.auth_name=%BWAUTHUSER-174% account.174.user_name=%BWLINEPORT-174% account.174.password=%BWAUTHPASSWORD-174%
#W80B ADD account.174.sip_server.template = account.174.media_transmit.enable =
account.174.alarm.template = account.174.alarm.server = account.174.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 810 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.174.sip_server.1.failback_mode =
account.174.sip_server.1.failback_timeout =
account.174.sip_server.1.register_on_enable =
account.174.sip_server.1.failback_subscribe.enable =
account.174.sip_server.1.invite_retry_counts =
account.174.sip_server.1.only_signal_with_registered =
account.174.sip_server.2.failback_mode = account.174.sip_server.2.failback_timeout = account.174.sip_server.2.register_on_enable = account.174.sip_server.2.failback_subscribe.enable = account.174.sip_server.2.invite_retry_counts = account.174.sip_server.2.only_signal_with_registered =
account.174.naptr_build = account.174.fallback.redundancy_type = account.174.fallback.timeout =
account.174.dns_cache_type = account.174.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.174.anonymous_call =
account.174.reject_anonymous_call =
account.174.send_anonymous_code =
account.174.anonymous_call_oncode =
account.174.anonymous_call_offcode =
account.174.send_anonymous_rejection_code =
account.174.anonymous_reject_oncode =
account.174.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.174.codec.g722.enable =
account.174.codec.g722.priority =
account.174.codec.g729.enable = account.174.codec.g729.priority =
account.174.codec.g726_16.enable = account.174.codec.g726_16.priority =
account.174.codec.g726_24.enable = account.174.codec.g726_24.priority =
account.174.codec.g726_32.enable = account.174.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 811 OF 1142
account.174.codec.g726_40.enable = account.174.codec.g726_40.priority =
account.174.codec.ilbc.enable = account.174.codec.ilbc.priority =
account.174.codec.pcmu.enable = account.174.codec.pcmu.priority =
account.174.codec.pcma.enable = account.174.codec.pcma.priority =
account.174.codec.opus.enable = account.174.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.174.nat.nat_traversal = account.174.nat.udp_update_enable = account.174.nat.udp_update_time = account.174.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.174.blf.subscribe_period = account.174.dtmf.type = account.174.dtmf.dtmf_payload = account.174.dtmf.info_type = account.174.100rel_enable = account.174.subscribe_register = account.174.subscribe_mwi = account.174.subscribe_mwi_expires = account.174.subscribe_mwi_to_vm = voice_mail.number.174 = %BWVOICE-PORTAL-NUMBER-174% account.174.display_mwi.enable = account.174.cid_source = account.174.cid_source_privacy = account.174.cid_source_ppi = account.174.session_timer.enable = account.174.session_timer.expires = account.174.session_timer.refresher = account.174.enable_user_equal_phone = account.174.srtp_encryption = account.174.ptime = account.174.shared_line = %BWSHAREDLINE-BINARY-174% account.174.register_mac = account.174.register_line = account.174.reg_fail_retry_interval = account.174.reg_failed_retry_min_time = account.174.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 812 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.174.conf_type =
account.174.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-174%
account.174.sip_server_type = account.174.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.174.register_expires_overlap = account.174.subscribe_expires_overlap = account.174.auto_dial_enable = account.174.auto_dial_num = account.174.cp_source = account.174.transfer_refer_to_contact_header.enable = #V80 Add account.174.custom_ua = account.174.callpark_enable = account.174.check_cseq.enable = account.174.check_to_tag.enable = account.174.hold_use_inactive = account.174.line_seize.expires = account.174.update_ack_while_dialing = account.174.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.174.always_fwd.enable =
account.174.always_fwd.target =
account.174.always_fwd.off_code =
account.174.always_fwd.on_code =
account.174.busy_fwd.enable =
account.174.busy_fwd.target =
account.174.busy_fwd.off_code =
account.174.busy_fwd.on_code =
account.174.timeout_fwd.enable =
account.174.timeout_fwd.target =
account.174.timeout_fwd.timeout =
account.174.timeout_fwd.off_code =
account.174.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 813 OF 1142
account.174.dnd.enable = account.174.dnd.on_code = account.174.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.174.reg.enable =
handset.174.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.174.xsi.user =%BWLOGIN-ID-174% account.174.xsi.password =%XSIPASSWORD-174% account.174.xsi.host =%XSP_ADDRESS% account.174.xsi.server_type = account.174.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.174.ldap.enable =
handset.174.ldap.name_filter=
handset.174.ldap.number_filter=
handset.174.ldap.host=
handset.174.ldap.port=
handset.174.ldap.base=
handset.174.ldap.user=
handset.174.ldap.password=
handset.174.ldap.max_hits=
handset.174.ldap.name_attr=
handset.174.ldap.numb_attr=
handset.174.ldap.display_name=
handset.174.ldap.version=
handset.174.ldap.call_in_lookup=
handset.174.ldap.ldap_sort=
handset.174.ldap.tls_mode=
handset.174.ldap.call_out_lookup=
handset.174.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account175 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 814 OF 1142
account.175.enable=%BWLINE-BINARY-175% account.175.label=%BWEXTENSION-175% account.175.display_name=%BWCLID-175% account.175.auth_name=%BWAUTHUSER-175% account.175.user_name=%BWLINEPORT-175% account.175.password=%BWAUTHPASSWORD-175%
#W80B ADD account.175.sip_server.template = account.175.media_transmit.enable =
account.175.alarm.template = account.175.alarm.server = account.175.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.175.sip_server.1.failback_mode =
account.175.sip_server.1.failback_timeout =
account.175.sip_server.1.register_on_enable =
account.175.sip_server.1.failback_subscribe.enable =
account.175.sip_server.1.invite_retry_counts =
account.175.sip_server.1.only_signal_with_registered =
account.175.sip_server.2.failback_mode = account.175.sip_server.2.failback_timeout = account.175.sip_server.2.register_on_enable = account.175.sip_server.2.failback_subscribe.enable = account.175.sip_server.2.invite_retry_counts = account.175.sip_server.2.only_signal_with_registered =
account.175.naptr_build = account.175.fallback.redundancy_type = account.175.fallback.timeout =
account.175.dns_cache_type = account.175.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.175.anonymous_call =
account.175.reject_anonymous_call =
account.175.send_anonymous_code =
account.175.anonymous_call_oncode =
account.175.anonymous_call_offcode =
account.175.send_anonymous_rejection_code =
account.175.anonymous_reject_oncode =
account.175.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 815 OF 1142
########################################################################## ############# account.175.codec.g722.enable = account.175.codec.g722.priority =
account.175.codec.g729.enable = account.175.codec.g729.priority =
account.175.codec.g726_16.enable = account.175.codec.g726_16.priority =
account.175.codec.g726_24.enable = account.175.codec.g726_24.priority =
account.175.codec.g726_32.enable = account.175.codec.g726_32.priority =
account.175.codec.g726_40.enable = account.175.codec.g726_40.priority =
account.175.codec.ilbc.enable = account.175.codec.ilbc.priority =
account.175.codec.pcmu.enable = account.175.codec.pcmu.priority =
account.175.codec.pcma.enable = account.175.codec.pcma.priority =
account.175.codec.opus.enable = account.175.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.175.nat.nat_traversal = account.175.nat.udp_update_enable = account.175.nat.udp_update_time = account.175.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.175.blf.subscribe_period = account.175.dtmf.type = account.175.dtmf.dtmf_payload = account.175.dtmf.info_type = account.175.100rel_enable = account.175.subscribe_register = account.175.subscribe_mwi = account.175.subscribe_mwi_expires = account.175.subscribe_mwi_to_vm = voice_mail.number.175 = %BWVOICE-PORTAL-NUMBER-175% account.175.display_mwi.enable = account.175.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 816 OF 1142
account.175.cid_source_privacy = account.175.cid_source_ppi = account.175.session_timer.enable = account.175.session_timer.expires = account.175.session_timer.refresher = account.175.enable_user_equal_phone = account.175.srtp_encryption = account.175.ptime = account.175.shared_line = %BWSHAREDLINE-BINARY-175% account.175.register_mac = account.175.register_line = account.175.reg_fail_retry_interval = account.175.reg_failed_retry_min_time = account.175.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.175.conf_type =
account.175.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-175%
account.175.sip_server_type = account.175.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.175.register_expires_overlap = account.175.subscribe_expires_overlap = account.175.auto_dial_enable = account.175.auto_dial_num = account.175.cp_source = account.175.transfer_refer_to_contact_header.enable = #V80 Add account.175.custom_ua = account.175.callpark_enable = account.175.check_cseq.enable = account.175.check_to_tag.enable = account.175.hold_use_inactive = account.175.line_seize.expires = account.175.update_ack_while_dialing = account.175.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.175.always_fwd.enable =
account.175.always_fwd.target =
account.175.always_fwd.off_code =
account.175.always_fwd.on_code =
account.175.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 817 OF 1142
account.175.busy_fwd.target = account.175.busy_fwd.off_code = account.175.busy_fwd.on_code = account.175.timeout_fwd.enable = account.175.timeout_fwd.target = account.175.timeout_fwd.timeout = account.175.timeout_fwd.off_code = account.175.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.175.dnd.enable =
account.175.dnd.on_code =
account.175.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.175.reg.enable =
handset.175.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.175.xsi.user =%BWLOGIN-ID-175% account.175.xsi.password =%XSIPASSWORD-175% account.175.xsi.host =%XSP_ADDRESS% account.175.xsi.server_type = account.175.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.175.ldap.enable =
handset.175.ldap.name_filter=
handset.175.ldap.number_filter=
handset.175.ldap.host=
handset.175.ldap.port=
handset.175.ldap.base=
handset.175.ldap.user=
handset.175.ldap.password=
handset.175.ldap.max_hits=
handset.175.ldap.name_attr=
handset.175.ldap.numb_attr=
handset.175.ldap.display_name=
handset.175.ldap.version=
handset.175.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 818 OF 1142
handset.175.ldap.ldap_sort= handset.175.ldap.tls_mode= handset.175.ldap.call_out_lookup= handset.175.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account176 Settings
##
##########################################################################
#############
account.176.enable=%BWLINE-BINARY-176% account.176.label=%BWEXTENSION-176% account.176.display_name=%BWCLID-176% account.176.auth_name=%BWAUTHUSER-176% account.176.user_name=%BWLINEPORT-176% account.176.password=%BWAUTHPASSWORD-176%
#W80B ADD account.176.sip_server.template = account.176.media_transmit.enable =
account.176.alarm.template = account.176.alarm.server = account.176.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.176.sip_server.1.failback_mode =
account.176.sip_server.1.failback_timeout =
account.176.sip_server.1.register_on_enable =
account.176.sip_server.1.failback_subscribe.enable =
account.176.sip_server.1.invite_retry_counts =
account.176.sip_server.1.only_signal_with_registered =
account.176.sip_server.2.failback_mode = account.176.sip_server.2.failback_timeout = account.176.sip_server.2.register_on_enable = account.176.sip_server.2.failback_subscribe.enable = account.176.sip_server.2.invite_retry_counts = account.176.sip_server.2.only_signal_with_registered =
account.176.naptr_build = account.176.fallback.redundancy_type = account.176.fallback.timeout =
account.176.dns_cache_type = account.176.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 819 OF 1142
account.176.anonymous_call = account.176.reject_anonymous_call = account.176.send_anonymous_code = account.176.anonymous_call_oncode = account.176.anonymous_call_offcode = account.176.send_anonymous_rejection_code = account.176.anonymous_reject_oncode = account.176.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.176.codec.g722.enable =
account.176.codec.g722.priority =
account.176.codec.g729.enable = account.176.codec.g729.priority =
account.176.codec.g726_16.enable = account.176.codec.g726_16.priority =
account.176.codec.g726_24.enable = account.176.codec.g726_24.priority =
account.176.codec.g726_32.enable = account.176.codec.g726_32.priority =
account.176.codec.g726_40.enable = account.176.codec.g726_40.priority =
account.176.codec.ilbc.enable = account.176.codec.ilbc.priority =
account.176.codec.pcmu.enable = account.176.codec.pcmu.priority =
account.176.codec.pcma.enable = account.176.codec.pcma.priority =
account.176.codec.opus.enable = account.176.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.176.nat.nat_traversal = account.176.nat.udp_update_enable = account.176.nat.udp_update_time = account.176.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 820 OF 1142
########################################################################## #############
account.176.blf.subscribe_period = account.176.dtmf.type = account.176.dtmf.dtmf_payload = account.176.dtmf.info_type = account.176.100rel_enable = account.176.subscribe_register = account.176.subscribe_mwi = account.176.subscribe_mwi_expires = account.176.subscribe_mwi_to_vm = voice_mail.number.176 = %BWVOICE-PORTAL-NUMBER-176% account.176.display_mwi.enable = account.176.cid_source = account.176.cid_source_privacy = account.176.cid_source_ppi = account.176.session_timer.enable = account.176.session_timer.expires = account.176.session_timer.refresher = account.176.enable_user_equal_phone = account.176.srtp_encryption = account.176.ptime = account.176.shared_line = %BWSHAREDLINE-BINARY-176% account.176.register_mac = account.176.register_line = account.176.reg_fail_retry_interval = account.176.reg_failed_retry_min_time = account.176.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.176.conf_type =
account.176.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-176%
account.176.sip_server_type = account.176.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.176.register_expires_overlap = account.176.subscribe_expires_overlap = account.176.auto_dial_enable = account.176.auto_dial_num = account.176.cp_source = account.176.transfer_refer_to_contact_header.enable = #V80 Add account.176.custom_ua = account.176.callpark_enable = account.176.check_cseq.enable = account.176.check_to_tag.enable = account.176.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 821 OF 1142
account.176.line_seize.expires = account.176.update_ack_while_dialing = account.176.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.176.always_fwd.enable =
account.176.always_fwd.target =
account.176.always_fwd.off_code =
account.176.always_fwd.on_code =
account.176.busy_fwd.enable =
account.176.busy_fwd.target =
account.176.busy_fwd.off_code =
account.176.busy_fwd.on_code =
account.176.timeout_fwd.enable =
account.176.timeout_fwd.target =
account.176.timeout_fwd.timeout =
account.176.timeout_fwd.off_code =
account.176.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.176.dnd.enable =
account.176.dnd.on_code =
account.176.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.176.reg.enable =
handset.176.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.176.xsi.user =%BWLOGIN-ID-176% account.176.xsi.password =%XSIPASSWORD-176% account.176.xsi.host =%XSP_ADDRESS% account.176.xsi.server_type = account.176.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 822 OF 1142
########################################################################## ############# handset.176.ldap.enable = handset.176.ldap.name_filter= handset.176.ldap.number_filter= handset.176.ldap.host= handset.176.ldap.port= handset.176.ldap.base= handset.176.ldap.user= handset.176.ldap.password= handset.176.ldap.max_hits= handset.176.ldap.name_attr= handset.176.ldap.numb_attr= handset.176.ldap.display_name= handset.176.ldap.version= handset.176.ldap.call_in_lookup= handset.176.ldap.ldap_sort= handset.176.ldap.tls_mode= handset.176.ldap.call_out_lookup= handset.176.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account177 Settings
##
##########################################################################
#############
account.177.enable=%BWLINE-BINARY-177% account.177.label=%BWEXTENSION-177% account.177.display_name=%BWCLID-177% account.177.auth_name=%BWAUTHUSER-177% account.177.user_name=%BWLINEPORT-177% account.177.password=%BWAUTHPASSWORD-177%
#W80B ADD account.177.sip_server.template = account.177.media_transmit.enable =
account.177.alarm.template = account.177.alarm.server = account.177.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.177.sip_server.1.failback_mode =
account.177.sip_server.1.failback_timeout =
account.177.sip_server.1.register_on_enable =
account.177.sip_server.1.failback_subscribe.enable =
account.177.sip_server.1.invite_retry_counts =
account.177.sip_server.1.only_signal_with_registered =
account.177.sip_server.2.failback_mode = account.177.sip_server.2.failback_timeout = account.177.sip_server.2.register_on_enable = account.177.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 823 OF 1142
account.177.sip_server.2.invite_retry_counts = account.177.sip_server.2.only_signal_with_registered =
account.177.naptr_build = account.177.fallback.redundancy_type = account.177.fallback.timeout =
account.177.dns_cache_type = account.177.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.177.anonymous_call =
account.177.reject_anonymous_call =
account.177.send_anonymous_code =
account.177.anonymous_call_oncode =
account.177.anonymous_call_offcode =
account.177.send_anonymous_rejection_code =
account.177.anonymous_reject_oncode =
account.177.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.177.codec.g722.enable =
account.177.codec.g722.priority =
account.177.codec.g729.enable = account.177.codec.g729.priority =
account.177.codec.g726_16.enable = account.177.codec.g726_16.priority =
account.177.codec.g726_24.enable = account.177.codec.g726_24.priority =
account.177.codec.g726_32.enable = account.177.codec.g726_32.priority =
account.177.codec.g726_40.enable = account.177.codec.g726_40.priority =
account.177.codec.ilbc.enable = account.177.codec.ilbc.priority =
account.177.codec.pcmu.enable = account.177.codec.pcmu.priority =
account.177.codec.pcma.enable = account.177.codec.pcma.priority =
account.177.codec.opus.enable = account.177.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 824 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.177.nat.nat_traversal = account.177.nat.udp_update_enable = account.177.nat.udp_update_time = account.177.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.177.blf.subscribe_period = account.177.dtmf.type = account.177.dtmf.dtmf_payload = account.177.dtmf.info_type = account.177.100rel_enable = account.177.subscribe_register = account.177.subscribe_mwi = account.177.subscribe_mwi_expires = account.177.subscribe_mwi_to_vm = voice_mail.number.177 = %BWVOICE-PORTAL-NUMBER-177% account.177.display_mwi.enable = account.177.cid_source = account.177.cid_source_privacy = account.177.cid_source_ppi = account.177.session_timer.enable = account.177.session_timer.expires = account.177.session_timer.refresher = account.177.enable_user_equal_phone = account.177.srtp_encryption = account.177.ptime = account.177.shared_line = %BWSHAREDLINE-BINARY-177% account.177.register_mac = account.177.register_line = account.177.reg_fail_retry_interval = account.177.reg_failed_retry_min_time = account.177.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.177.conf_type =
account.177.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-177%
account.177.sip_server_type = account.177.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 825 OF 1142
########################################################################## ############# ##DECT V81 Add
account.177.register_expires_overlap = account.177.subscribe_expires_overlap = account.177.auto_dial_enable = account.177.auto_dial_num = account.177.cp_source = account.177.transfer_refer_to_contact_header.enable = #V80 Add account.177.custom_ua = account.177.callpark_enable = account.177.check_cseq.enable = account.177.check_to_tag.enable = account.177.hold_use_inactive = account.177.line_seize.expires = account.177.update_ack_while_dialing = account.177.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.177.always_fwd.enable =
account.177.always_fwd.target =
account.177.always_fwd.off_code =
account.177.always_fwd.on_code =
account.177.busy_fwd.enable =
account.177.busy_fwd.target =
account.177.busy_fwd.off_code =
account.177.busy_fwd.on_code =
account.177.timeout_fwd.enable =
account.177.timeout_fwd.target =
account.177.timeout_fwd.timeout =
account.177.timeout_fwd.off_code =
account.177.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.177.dnd.enable =
account.177.dnd.on_code =
account.177.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.177.reg.enable =
handset.177.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 826 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.177.xsi.user =%BWLOGIN-ID-177% account.177.xsi.password =%XSIPASSWORD-177% account.177.xsi.host =%XSP_ADDRESS% account.177.xsi.server_type = account.177.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.177.ldap.enable =
handset.177.ldap.name_filter=
handset.177.ldap.number_filter=
handset.177.ldap.host=
handset.177.ldap.port=
handset.177.ldap.base=
handset.177.ldap.user=
handset.177.ldap.password=
handset.177.ldap.max_hits=
handset.177.ldap.name_attr=
handset.177.ldap.numb_attr=
handset.177.ldap.display_name=
handset.177.ldap.version=
handset.177.ldap.call_in_lookup=
handset.177.ldap.ldap_sort=
handset.177.ldap.tls_mode=
handset.177.ldap.call_out_lookup=
handset.177.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account178 Settings
##
##########################################################################
#############
account.178.enable=%BWLINE-BINARY-178% account.178.label=%BWEXTENSION-178% account.178.display_name=%BWCLID-178% account.178.auth_name=%BWAUTHUSER-178% account.178.user_name=%BWLINEPORT-178% account.178.password=%BWAUTHPASSWORD-178%
#W80B ADD account.178.sip_server.template = account.178.media_transmit.enable =
account.178.alarm.template = account.178.alarm.server = account.178.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 827 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.178.sip_server.1.failback_mode =
account.178.sip_server.1.failback_timeout =
account.178.sip_server.1.register_on_enable =
account.178.sip_server.1.failback_subscribe.enable =
account.178.sip_server.1.invite_retry_counts =
account.178.sip_server.1.only_signal_with_registered =
account.178.sip_server.2.failback_mode = account.178.sip_server.2.failback_timeout = account.178.sip_server.2.register_on_enable = account.178.sip_server.2.failback_subscribe.enable = account.178.sip_server.2.invite_retry_counts = account.178.sip_server.2.only_signal_with_registered =
account.178.naptr_build = account.178.fallback.redundancy_type = account.178.fallback.timeout =
account.178.dns_cache_type = account.178.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.178.anonymous_call =
account.178.reject_anonymous_call =
account.178.send_anonymous_code =
account.178.anonymous_call_oncode =
account.178.anonymous_call_offcode =
account.178.send_anonymous_rejection_code =
account.178.anonymous_reject_oncode =
account.178.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.178.codec.g722.enable =
account.178.codec.g722.priority =
account.178.codec.g729.enable = account.178.codec.g729.priority =
account.178.codec.g726_16.enable = account.178.codec.g726_16.priority =
account.178.codec.g726_24.enable = account.178.codec.g726_24.priority =
account.178.codec.g726_32.enable = account.178.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 828 OF 1142
account.178.codec.g726_40.enable = account.178.codec.g726_40.priority =
account.178.codec.ilbc.enable = account.178.codec.ilbc.priority =
account.178.codec.pcmu.enable = account.178.codec.pcmu.priority =
account.178.codec.pcma.enable = account.178.codec.pcma.priority =
account.178.codec.opus.enable = account.178.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.178.nat.nat_traversal = account.178.nat.udp_update_enable = account.178.nat.udp_update_time = account.178.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.178.blf.subscribe_period = account.178.dtmf.type = account.178.dtmf.dtmf_payload = account.178.dtmf.info_type = account.178.100rel_enable = account.178.subscribe_register = account.178.subscribe_mwi = account.178.subscribe_mwi_expires = account.178.subscribe_mwi_to_vm = voice_mail.number.178 = %BWVOICE-PORTAL-NUMBER-178% account.178.display_mwi.enable = account.178.cid_source = account.178.cid_source_privacy = account.178.cid_source_ppi = account.178.session_timer.enable = account.178.session_timer.expires = account.178.session_timer.refresher = account.178.enable_user_equal_phone = account.178.srtp_encryption = account.178.ptime = account.178.shared_line = %BWSHAREDLINE-BINARY-178% account.178.register_mac = account.178.register_line = account.178.reg_fail_retry_interval = account.178.reg_failed_retry_min_time = account.178.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 829 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.178.conf_type =
account.178.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-178%
account.178.sip_server_type = account.178.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.178.register_expires_overlap = account.178.subscribe_expires_overlap = account.178.auto_dial_enable = account.178.auto_dial_num = account.178.cp_source = account.178.transfer_refer_to_contact_header.enable = #V80 Add account.178.custom_ua = account.178.callpark_enable = account.178.check_cseq.enable = account.178.check_to_tag.enable = account.178.hold_use_inactive = account.178.line_seize.expires = account.178.update_ack_while_dialing = account.178.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.178.always_fwd.enable =
account.178.always_fwd.target =
account.178.always_fwd.off_code =
account.178.always_fwd.on_code =
account.178.busy_fwd.enable =
account.178.busy_fwd.target =
account.178.busy_fwd.off_code =
account.178.busy_fwd.on_code =
account.178.timeout_fwd.enable =
account.178.timeout_fwd.target =
account.178.timeout_fwd.timeout =
account.178.timeout_fwd.off_code =
account.178.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 830 OF 1142
account.178.dnd.enable = account.178.dnd.on_code = account.178.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.178.reg.enable =
handset.178.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.178.xsi.user =%BWLOGIN-ID-178% account.178.xsi.password =%XSIPASSWORD-178% account.178.xsi.host =%XSP_ADDRESS% account.178.xsi.server_type = account.178.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.178.ldap.enable =
handset.178.ldap.name_filter=
handset.178.ldap.number_filter=
handset.178.ldap.host=
handset.178.ldap.port=
handset.178.ldap.base=
handset.178.ldap.user=
handset.178.ldap.password=
handset.178.ldap.max_hits=
handset.178.ldap.name_attr=
handset.178.ldap.numb_attr=
handset.178.ldap.display_name=
handset.178.ldap.version=
handset.178.ldap.call_in_lookup=
handset.178.ldap.ldap_sort=
handset.178.ldap.tls_mode=
handset.178.ldap.call_out_lookup=
handset.178.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account179 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 831 OF 1142
account.179.enable=%BWLINE-BINARY-179% account.179.label=%BWEXTENSION-179% account.179.display_name=%BWCLID-179% account.179.auth_name=%BWAUTHUSER-179% account.179.user_name=%BWLINEPORT-179% account.179.password=%BWAUTHPASSWORD-179%
#W80B ADD account.179.sip_server.template = account.179.media_transmit.enable =
account.179.alarm.template = account.179.alarm.server = account.179.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.179.sip_server.1.failback_mode =
account.179.sip_server.1.failback_timeout =
account.179.sip_server.1.register_on_enable =
account.179.sip_server.1.failback_subscribe.enable =
account.179.sip_server.1.invite_retry_counts =
account.179.sip_server.1.only_signal_with_registered =
account.179.sip_server.2.failback_mode = account.179.sip_server.2.failback_timeout = account.179.sip_server.2.register_on_enable = account.179.sip_server.2.failback_subscribe.enable = account.179.sip_server.2.invite_retry_counts = account.179.sip_server.2.only_signal_with_registered =
account.179.naptr_build = account.179.fallback.redundancy_type = account.179.fallback.timeout =
account.179.dns_cache_type = account.179.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.179.anonymous_call =
account.179.reject_anonymous_call =
account.179.send_anonymous_code =
account.179.anonymous_call_oncode =
account.179.anonymous_call_offcode =
account.179.send_anonymous_rejection_code =
account.179.anonymous_reject_oncode =
account.179.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 832 OF 1142
########################################################################## ############# account.179.codec.g722.enable = account.179.codec.g722.priority =
account.179.codec.g729.enable = account.179.codec.g729.priority =
account.179.codec.g726_16.enable = account.179.codec.g726_16.priority =
account.179.codec.g726_24.enable = account.179.codec.g726_24.priority =
account.179.codec.g726_32.enable = account.179.codec.g726_32.priority =
account.179.codec.g726_40.enable = account.179.codec.g726_40.priority =
account.179.codec.ilbc.enable = account.179.codec.ilbc.priority =
account.179.codec.pcmu.enable = account.179.codec.pcmu.priority =
account.179.codec.pcma.enable = account.179.codec.pcma.priority =
account.179.codec.opus.enable = account.179.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.179.nat.nat_traversal = account.179.nat.udp_update_enable = account.179.nat.udp_update_time = account.179.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.179.blf.subscribe_period = account.179.dtmf.type = account.179.dtmf.dtmf_payload = account.179.dtmf.info_type = account.179.100rel_enable = account.179.subscribe_register = account.179.subscribe_mwi = account.179.subscribe_mwi_expires = account.179.subscribe_mwi_to_vm = voice_mail.number.179 = %BWVOICE-PORTAL-NUMBER-179% account.179.display_mwi.enable = account.179.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 833 OF 1142
account.179.cid_source_privacy = account.179.cid_source_ppi = account.179.session_timer.enable = account.179.session_timer.expires = account.179.session_timer.refresher = account.179.enable_user_equal_phone = account.179.srtp_encryption = account.179.ptime = account.179.shared_line = %BWSHAREDLINE-BINARY-179% account.179.register_mac = account.179.register_line = account.179.reg_fail_retry_interval = account.179.reg_failed_retry_min_time = account.179.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.179.conf_type =
account.179.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-179%
account.179.sip_server_type = account.179.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.179.register_expires_overlap = account.179.subscribe_expires_overlap = account.179.auto_dial_enable = account.179.auto_dial_num = account.179.cp_source = account.179.transfer_refer_to_contact_header.enable = #V80 Add account.179.custom_ua = account.179.callpark_enable = account.179.check_cseq.enable = account.179.check_to_tag.enable = account.179.hold_use_inactive = account.179.line_seize.expires = account.179.update_ack_while_dialing = account.179.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.179.always_fwd.enable =
account.179.always_fwd.target =
account.179.always_fwd.off_code =
account.179.always_fwd.on_code =
account.179.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 834 OF 1142
account.179.busy_fwd.target = account.179.busy_fwd.off_code = account.179.busy_fwd.on_code = account.179.timeout_fwd.enable = account.179.timeout_fwd.target = account.179.timeout_fwd.timeout = account.179.timeout_fwd.off_code = account.179.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.179.dnd.enable =
account.179.dnd.on_code =
account.179.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.179.reg.enable =
handset.179.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.179.xsi.user =%BWLOGIN-ID-179% account.179.xsi.password =%XSIPASSWORD-179% account.179.xsi.host =%XSP_ADDRESS% account.179.xsi.server_type = account.179.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.179.ldap.enable =
handset.179.ldap.name_filter=
handset.179.ldap.number_filter=
handset.179.ldap.host=
handset.179.ldap.port=
handset.179.ldap.base=
handset.179.ldap.user=
handset.179.ldap.password=
handset.179.ldap.max_hits=
handset.179.ldap.name_attr=
handset.179.ldap.numb_attr=
handset.179.ldap.display_name=
handset.179.ldap.version=
handset.179.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 835 OF 1142
handset.179.ldap.ldap_sort= handset.179.ldap.tls_mode= handset.179.ldap.call_out_lookup= handset.179.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account180 Settings
##
##########################################################################
#############
account.180.enable=%BWLINE-BINARY-180% account.180.label=%BWEXTENSION-180% account.180.display_name=%BWCLID-180% account.180.auth_name=%BWAUTHUSER-180% account.180.user_name=%BWLINEPORT-180% account.180.password=%BWAUTHPASSWORD-180%
#W80B ADD account.180.sip_server.template = account.180.media_transmit.enable =
account.180.alarm.template = account.180.alarm.server = account.180.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.180.sip_server.1.failback_mode =
account.180.sip_server.1.failback_timeout =
account.180.sip_server.1.register_on_enable =
account.180.sip_server.1.failback_subscribe.enable =
account.180.sip_server.1.invite_retry_counts =
account.180.sip_server.1.only_signal_with_registered =
account.180.sip_server.2.failback_mode = account.180.sip_server.2.failback_timeout = account.180.sip_server.2.register_on_enable = account.180.sip_server.2.failback_subscribe.enable = account.180.sip_server.2.invite_retry_counts = account.180.sip_server.2.only_signal_with_registered =
account.180.naptr_build = account.180.fallback.redundancy_type = account.180.fallback.timeout =
account.180.dns_cache_type = account.180.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 836 OF 1142
account.180.anonymous_call = account.180.reject_anonymous_call = account.180.send_anonymous_code = account.180.anonymous_call_oncode = account.180.anonymous_call_offcode = account.180.send_anonymous_rejection_code = account.180.anonymous_reject_oncode = account.180.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.180.codec.g722.enable =
account.180.codec.g722.priority =
account.180.codec.g729.enable = account.180.codec.g729.priority =
account.180.codec.g726_16.enable = account.180.codec.g726_16.priority =
account.180.codec.g726_24.enable = account.180.codec.g726_24.priority =
account.180.codec.g726_32.enable = account.180.codec.g726_32.priority =
account.180.codec.g726_40.enable = account.180.codec.g726_40.priority =
account.180.codec.ilbc.enable = account.180.codec.ilbc.priority =
account.180.codec.pcmu.enable = account.180.codec.pcmu.priority =
account.180.codec.pcma.enable = account.180.codec.pcma.priority =
account.180.codec.opus.enable = account.180.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.180.nat.nat_traversal = account.180.nat.udp_update_enable = account.180.nat.udp_update_time = account.180.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 837 OF 1142
########################################################################## #############
account.180.blf.subscribe_period = account.180.dtmf.type = account.180.dtmf.dtmf_payload = account.180.dtmf.info_type = account.180.100rel_enable = account.180.subscribe_register = account.180.subscribe_mwi = account.180.subscribe_mwi_expires = account.180.subscribe_mwi_to_vm = voice_mail.number.180 = %BWVOICE-PORTAL-NUMBER-180% account.180.display_mwi.enable = account.180.cid_source = account.180.cid_source_privacy = account.180.cid_source_ppi = account.180.session_timer.enable = account.180.session_timer.expires = account.180.session_timer.refresher = account.180.enable_user_equal_phone = account.180.srtp_encryption = account.180.ptime = account.180.shared_line = %BWSHAREDLINE-BINARY-180% account.180.register_mac = account.180.register_line = account.180.reg_fail_retry_interval = account.180.reg_failed_retry_min_time = account.180.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.180.conf_type =
account.180.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-180%
account.180.sip_server_type = account.180.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.180.register_expires_overlap = account.180.subscribe_expires_overlap = account.180.auto_dial_enable = account.180.auto_dial_num = account.180.cp_source = account.180.transfer_refer_to_contact_header.enable = #V80 Add account.180.custom_ua = account.180.callpark_enable = account.180.check_cseq.enable = account.180.check_to_tag.enable = account.180.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 838 OF 1142
account.180.line_seize.expires = account.180.update_ack_while_dialing = account.180.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.180.always_fwd.enable =
account.180.always_fwd.target =
account.180.always_fwd.off_code =
account.180.always_fwd.on_code =
account.180.busy_fwd.enable =
account.180.busy_fwd.target =
account.180.busy_fwd.off_code =
account.180.busy_fwd.on_code =
account.180.timeout_fwd.enable =
account.180.timeout_fwd.target =
account.180.timeout_fwd.timeout =
account.180.timeout_fwd.off_code =
account.180.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.180.dnd.enable =
account.180.dnd.on_code =
account.180.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.180.reg.enable =
handset.180.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.180.xsi.user =%BWLOGIN-ID-180% account.180.xsi.password =%XSIPASSWORD-180% account.180.xsi.host =%XSP_ADDRESS% account.180.xsi.server_type = account.180.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 839 OF 1142
########################################################################## ############# handset.180.ldap.enable = handset.180.ldap.name_filter= handset.180.ldap.number_filter= handset.180.ldap.host= handset.180.ldap.port= handset.180.ldap.base= handset.180.ldap.user= handset.180.ldap.password= handset.180.ldap.max_hits= handset.180.ldap.name_attr= handset.180.ldap.numb_attr= handset.180.ldap.display_name= handset.180.ldap.version= handset.180.ldap.call_in_lookup= handset.180.ldap.ldap_sort= handset.180.ldap.tls_mode= handset.180.ldap.call_out_lookup= handset.180.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account181 Settings
##
##########################################################################
#############
account.181.enable=%BWLINE-BINARY-181% account.181.label=%BWEXTENSION-181% account.181.display_name=%BWCLID-181% account.181.auth_name=%BWAUTHUSER-181% account.181.user_name=%BWLINEPORT-181% account.181.password=%BWAUTHPASSWORD-181%
#W80B ADD account.181.sip_server.template = account.181.media_transmit.enable =
account.181.alarm.template = account.181.alarm.server = account.181.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.181.sip_server.1.failback_mode =
account.181.sip_server.1.failback_timeout =
account.181.sip_server.1.register_on_enable =
account.181.sip_server.1.failback_subscribe.enable =
account.181.sip_server.1.invite_retry_counts =
account.181.sip_server.1.only_signal_with_registered =
account.181.sip_server.2.failback_mode = account.181.sip_server.2.failback_timeout = account.181.sip_server.2.register_on_enable = account.181.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 840 OF 1142
account.181.sip_server.2.invite_retry_counts = account.181.sip_server.2.only_signal_with_registered =
account.181.naptr_build = account.181.fallback.redundancy_type = account.181.fallback.timeout =
account.181.dns_cache_type = account.181.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.181.anonymous_call =
account.181.reject_anonymous_call =
account.181.send_anonymous_code =
account.181.anonymous_call_oncode =
account.181.anonymous_call_offcode =
account.181.send_anonymous_rejection_code =
account.181.anonymous_reject_oncode =
account.181.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.181.codec.g722.enable =
account.181.codec.g722.priority =
account.181.codec.g729.enable = account.181.codec.g729.priority =
account.181.codec.g726_16.enable = account.181.codec.g726_16.priority =
account.181.codec.g726_24.enable = account.181.codec.g726_24.priority =
account.181.codec.g726_32.enable = account.181.codec.g726_32.priority =
account.181.codec.g726_40.enable = account.181.codec.g726_40.priority =
account.181.codec.ilbc.enable = account.181.codec.ilbc.priority =
account.181.codec.pcmu.enable = account.181.codec.pcmu.priority =
account.181.codec.pcma.enable = account.181.codec.pcma.priority =
account.181.codec.opus.enable = account.181.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 841 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.181.nat.nat_traversal = account.181.nat.udp_update_enable = account.181.nat.udp_update_time = account.181.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.181.blf.subscribe_period = account.181.dtmf.type = account.181.dtmf.dtmf_payload = account.181.dtmf.info_type = account.181.100rel_enable = account.181.subscribe_register = account.181.subscribe_mwi = account.181.subscribe_mwi_expires = account.181.subscribe_mwi_to_vm = voice_mail.number.181 = %BWVOICE-PORTAL-NUMBER-181% account.181.display_mwi.enable = account.181.cid_source = account.181.cid_source_privacy = account.181.cid_source_ppi = account.181.session_timer.enable = account.181.session_timer.expires = account.181.session_timer.refresher = account.181.enable_user_equal_phone = account.181.srtp_encryption = account.181.ptime = account.181.shared_line = %BWSHAREDLINE-BINARY-181% account.181.register_mac = account.181.register_line = account.181.reg_fail_retry_interval = account.181.reg_failed_retry_min_time = account.181.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.181.conf_type =
account.181.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-181%
account.181.sip_server_type = account.181.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 842 OF 1142
########################################################################## ############# ##DECT V81 Add
account.181.register_expires_overlap = account.181.subscribe_expires_overlap = account.181.auto_dial_enable = account.181.auto_dial_num = account.181.cp_source = account.181.transfer_refer_to_contact_header.enable = #V80 Add account.181.custom_ua = account.181.callpark_enable = account.181.check_cseq.enable = account.181.check_to_tag.enable = account.181.hold_use_inactive = account.181.line_seize.expires = account.181.update_ack_while_dialing = account.181.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.181.always_fwd.enable =
account.181.always_fwd.target =
account.181.always_fwd.off_code =
account.181.always_fwd.on_code =
account.181.busy_fwd.enable =
account.181.busy_fwd.target =
account.181.busy_fwd.off_code =
account.181.busy_fwd.on_code =
account.181.timeout_fwd.enable =
account.181.timeout_fwd.target =
account.181.timeout_fwd.timeout =
account.181.timeout_fwd.off_code =
account.181.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.181.dnd.enable =
account.181.dnd.on_code =
account.181.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.181.reg.enable =
handset.181.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 843 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.181.xsi.user =%BWLOGIN-ID-181% account.181.xsi.password =%XSIPASSWORD-181% account.181.xsi.host =%XSP_ADDRESS% account.181.xsi.server_type = account.181.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.181.ldap.enable =
handset.181.ldap.name_filter=
handset.181.ldap.number_filter=
handset.181.ldap.host=
handset.181.ldap.port=
handset.181.ldap.base=
handset.181.ldap.user=
handset.181.ldap.password=
handset.181.ldap.max_hits=
handset.181.ldap.name_attr=
handset.181.ldap.numb_attr=
handset.181.ldap.display_name=
handset.181.ldap.version=
handset.181.ldap.call_in_lookup=
handset.181.ldap.ldap_sort=
handset.181.ldap.tls_mode=
handset.181.ldap.call_out_lookup=
handset.181.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account182 Settings
##
##########################################################################
#############
account.182.enable=%BWLINE-BINARY-182% account.182.label=%BWEXTENSION-182% account.182.display_name=%BWCLID-182% account.182.auth_name=%BWAUTHUSER-182% account.182.user_name=%BWLINEPORT-182% account.182.password=%BWAUTHPASSWORD-182%
#W80B ADD account.182.sip_server.template = account.182.media_transmit.enable =
account.182.alarm.template = account.182.alarm.server = account.182.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 844 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.182.sip_server.1.failback_mode =
account.182.sip_server.1.failback_timeout =
account.182.sip_server.1.register_on_enable =
account.182.sip_server.1.failback_subscribe.enable =
account.182.sip_server.1.invite_retry_counts =
account.182.sip_server.1.only_signal_with_registered =
account.182.sip_server.2.failback_mode = account.182.sip_server.2.failback_timeout = account.182.sip_server.2.register_on_enable = account.182.sip_server.2.failback_subscribe.enable = account.182.sip_server.2.invite_retry_counts = account.182.sip_server.2.only_signal_with_registered =
account.182.naptr_build = account.182.fallback.redundancy_type = account.182.fallback.timeout =
account.182.dns_cache_type = account.182.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.182.anonymous_call =
account.182.reject_anonymous_call =
account.182.send_anonymous_code =
account.182.anonymous_call_oncode =
account.182.anonymous_call_offcode =
account.182.send_anonymous_rejection_code =
account.182.anonymous_reject_oncode =
account.182.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.182.codec.g722.enable =
account.182.codec.g722.priority =
account.182.codec.g729.enable = account.182.codec.g729.priority =
account.182.codec.g726_16.enable = account.182.codec.g726_16.priority =
account.182.codec.g726_24.enable = account.182.codec.g726_24.priority =
account.182.codec.g726_32.enable = account.182.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 845 OF 1142
account.182.codec.g726_40.enable = account.182.codec.g726_40.priority =
account.182.codec.ilbc.enable = account.182.codec.ilbc.priority =
account.182.codec.pcmu.enable = account.182.codec.pcmu.priority =
account.182.codec.pcma.enable = account.182.codec.pcma.priority =
account.182.codec.opus.enable = account.182.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.182.nat.nat_traversal = account.182.nat.udp_update_enable = account.182.nat.udp_update_time = account.182.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.182.blf.subscribe_period = account.182.dtmf.type = account.182.dtmf.dtmf_payload = account.182.dtmf.info_type = account.182.100rel_enable = account.182.subscribe_register = account.182.subscribe_mwi = account.182.subscribe_mwi_expires = account.182.subscribe_mwi_to_vm = voice_mail.number.182 = %BWVOICE-PORTAL-NUMBER-182% account.182.display_mwi.enable = account.182.cid_source = account.182.cid_source_privacy = account.182.cid_source_ppi = account.182.session_timer.enable = account.182.session_timer.expires = account.182.session_timer.refresher = account.182.enable_user_equal_phone = account.182.srtp_encryption = account.182.ptime = account.182.shared_line = %BWSHAREDLINE-BINARY-182% account.182.register_mac = account.182.register_line = account.182.reg_fail_retry_interval = account.182.reg_failed_retry_min_time = account.182.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 846 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.182.conf_type =
account.182.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-182%
account.182.sip_server_type = account.182.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.182.register_expires_overlap = account.182.subscribe_expires_overlap = account.182.auto_dial_enable = account.182.auto_dial_num = account.182.cp_source = account.182.transfer_refer_to_contact_header.enable = #V80 Add account.182.custom_ua = account.182.callpark_enable = account.182.check_cseq.enable = account.182.check_to_tag.enable = account.182.hold_use_inactive = account.182.line_seize.expires = account.182.update_ack_while_dialing = account.182.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.182.always_fwd.enable =
account.182.always_fwd.target =
account.182.always_fwd.off_code =
account.182.always_fwd.on_code =
account.182.busy_fwd.enable =
account.182.busy_fwd.target =
account.182.busy_fwd.off_code =
account.182.busy_fwd.on_code =
account.182.timeout_fwd.enable =
account.182.timeout_fwd.target =
account.182.timeout_fwd.timeout =
account.182.timeout_fwd.off_code =
account.182.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 847 OF 1142
account.182.dnd.enable = account.182.dnd.on_code = account.182.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.182.reg.enable =
handset.182.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.182.xsi.user =%BWLOGIN-ID-182% account.182.xsi.password =%XSIPASSWORD-182% account.182.xsi.host =%XSP_ADDRESS% account.182.xsi.server_type = account.182.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.182.ldap.enable =
handset.182.ldap.name_filter=
handset.182.ldap.number_filter=
handset.182.ldap.host=
handset.182.ldap.port=
handset.182.ldap.base=
handset.182.ldap.user=
handset.182.ldap.password=
handset.182.ldap.max_hits=
handset.182.ldap.name_attr=
handset.182.ldap.numb_attr=
handset.182.ldap.display_name=
handset.182.ldap.version=
handset.182.ldap.call_in_lookup=
handset.182.ldap.ldap_sort=
handset.182.ldap.tls_mode=
handset.182.ldap.call_out_lookup=
handset.182.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account183 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 848 OF 1142
account.183.enable=%BWLINE-BINARY-183% account.183.label=%BWEXTENSION-183% account.183.display_name=%BWCLID-183% account.183.auth_name=%BWAUTHUSER-183% account.183.user_name=%BWLINEPORT-183% account.183.password=%BWAUTHPASSWORD-183%
#W80B ADD account.183.sip_server.template = account.183.media_transmit.enable =
account.183.alarm.template = account.183.alarm.server = account.183.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.183.sip_server.1.failback_mode =
account.183.sip_server.1.failback_timeout =
account.183.sip_server.1.register_on_enable =
account.183.sip_server.1.failback_subscribe.enable =
account.183.sip_server.1.invite_retry_counts =
account.183.sip_server.1.only_signal_with_registered =
account.183.sip_server.2.failback_mode = account.183.sip_server.2.failback_timeout = account.183.sip_server.2.register_on_enable = account.183.sip_server.2.failback_subscribe.enable = account.183.sip_server.2.invite_retry_counts = account.183.sip_server.2.only_signal_with_registered =
account.183.naptr_build = account.183.fallback.redundancy_type = account.183.fallback.timeout =
account.183.dns_cache_type = account.183.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.183.anonymous_call =
account.183.reject_anonymous_call =
account.183.send_anonymous_code =
account.183.anonymous_call_oncode =
account.183.anonymous_call_offcode =
account.183.send_anonymous_rejection_code =
account.183.anonymous_reject_oncode =
account.183.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 849 OF 1142
########################################################################## ############# account.183.codec.g722.enable = account.183.codec.g722.priority =
account.183.codec.g729.enable = account.183.codec.g729.priority =
account.183.codec.g726_16.enable = account.183.codec.g726_16.priority =
account.183.codec.g726_24.enable = account.183.codec.g726_24.priority =
account.183.codec.g726_32.enable = account.183.codec.g726_32.priority =
account.183.codec.g726_40.enable = account.183.codec.g726_40.priority =
account.183.codec.ilbc.enable = account.183.codec.ilbc.priority =
account.183.codec.pcmu.enable = account.183.codec.pcmu.priority =
account.183.codec.pcma.enable = account.183.codec.pcma.priority =
account.183.codec.opus.enable = account.183.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.183.nat.nat_traversal = account.183.nat.udp_update_enable = account.183.nat.udp_update_time = account.183.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.183.blf.subscribe_period = account.183.dtmf.type = account.183.dtmf.dtmf_payload = account.183.dtmf.info_type = account.183.100rel_enable = account.183.subscribe_register = account.183.subscribe_mwi = account.183.subscribe_mwi_expires = account.183.subscribe_mwi_to_vm = voice_mail.number.183 = %BWVOICE-PORTAL-NUMBER-183% account.183.display_mwi.enable = account.183.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 850 OF 1142
account.183.cid_source_privacy = account.183.cid_source_ppi = account.183.session_timer.enable = account.183.session_timer.expires = account.183.session_timer.refresher = account.183.enable_user_equal_phone = account.183.srtp_encryption = account.183.ptime = account.183.shared_line = %BWSHAREDLINE-BINARY-183% account.183.register_mac = account.183.register_line = account.183.reg_fail_retry_interval = account.183.reg_failed_retry_min_time = account.183.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.183.conf_type =
account.183.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-183%
account.183.sip_server_type = account.183.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.183.register_expires_overlap = account.183.subscribe_expires_overlap = account.183.auto_dial_enable = account.183.auto_dial_num = account.183.cp_source = account.183.transfer_refer_to_contact_header.enable = #V80 Add account.183.custom_ua = account.183.callpark_enable = account.183.check_cseq.enable = account.183.check_to_tag.enable = account.183.hold_use_inactive = account.183.line_seize.expires = account.183.update_ack_while_dialing = account.183.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.183.always_fwd.enable =
account.183.always_fwd.target =
account.183.always_fwd.off_code =
account.183.always_fwd.on_code =
account.183.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 851 OF 1142
account.183.busy_fwd.target = account.183.busy_fwd.off_code = account.183.busy_fwd.on_code = account.183.timeout_fwd.enable = account.183.timeout_fwd.target = account.183.timeout_fwd.timeout = account.183.timeout_fwd.off_code = account.183.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.183.dnd.enable =
account.183.dnd.on_code =
account.183.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.183.reg.enable =
handset.183.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.183.xsi.user =%BWLOGIN-ID-183% account.183.xsi.password =%XSIPASSWORD-183% account.183.xsi.host =%XSP_ADDRESS% account.183.xsi.server_type = account.183.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.183.ldap.enable =
handset.183.ldap.name_filter=
handset.183.ldap.number_filter=
handset.183.ldap.host=
handset.183.ldap.port=
handset.183.ldap.base=
handset.183.ldap.user=
handset.183.ldap.password=
handset.183.ldap.max_hits=
handset.183.ldap.name_attr=
handset.183.ldap.numb_attr=
handset.183.ldap.display_name=
handset.183.ldap.version=
handset.183.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 852 OF 1142
handset.183.ldap.ldap_sort= handset.183.ldap.tls_mode= handset.183.ldap.call_out_lookup= handset.183.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account184 Settings
##
##########################################################################
#############
account.184.enable=%BWLINE-BINARY-184% account.184.label=%BWEXTENSION-184% account.184.display_name=%BWCLID-184% account.184.auth_name=%BWAUTHUSER-184% account.184.user_name=%BWLINEPORT-184% account.184.password=%BWAUTHPASSWORD-184%
#W80B ADD account.184.sip_server.template = account.184.media_transmit.enable =
account.184.alarm.template = account.184.alarm.server = account.184.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.184.sip_server.1.failback_mode =
account.184.sip_server.1.failback_timeout =
account.184.sip_server.1.register_on_enable =
account.184.sip_server.1.failback_subscribe.enable =
account.184.sip_server.1.invite_retry_counts =
account.184.sip_server.1.only_signal_with_registered =
account.184.sip_server.2.failback_mode = account.184.sip_server.2.failback_timeout = account.184.sip_server.2.register_on_enable = account.184.sip_server.2.failback_subscribe.enable = account.184.sip_server.2.invite_retry_counts = account.184.sip_server.2.only_signal_with_registered =
account.184.naptr_build = account.184.fallback.redundancy_type = account.184.fallback.timeout =
account.184.dns_cache_type = account.184.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 853 OF 1142
account.184.anonymous_call = account.184.reject_anonymous_call = account.184.send_anonymous_code = account.184.anonymous_call_oncode = account.184.anonymous_call_offcode = account.184.send_anonymous_rejection_code = account.184.anonymous_reject_oncode = account.184.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.184.codec.g722.enable =
account.184.codec.g722.priority =
account.184.codec.g729.enable = account.184.codec.g729.priority =
account.184.codec.g726_16.enable = account.184.codec.g726_16.priority =
account.184.codec.g726_24.enable = account.184.codec.g726_24.priority =
account.184.codec.g726_32.enable = account.184.codec.g726_32.priority =
account.184.codec.g726_40.enable = account.184.codec.g726_40.priority =
account.184.codec.ilbc.enable = account.184.codec.ilbc.priority =
account.184.codec.pcmu.enable = account.184.codec.pcmu.priority =
account.184.codec.pcma.enable = account.184.codec.pcma.priority =
account.184.codec.opus.enable = account.184.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.184.nat.nat_traversal = account.184.nat.udp_update_enable = account.184.nat.udp_update_time = account.184.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 854 OF 1142
########################################################################## #############
account.184.blf.subscribe_period = account.184.dtmf.type = account.184.dtmf.dtmf_payload = account.184.dtmf.info_type = account.184.100rel_enable = account.184.subscribe_register = account.184.subscribe_mwi = account.184.subscribe_mwi_expires = account.184.subscribe_mwi_to_vm = voice_mail.number.184 = %BWVOICE-PORTAL-NUMBER-184% account.184.display_mwi.enable = account.184.cid_source = account.184.cid_source_privacy = account.184.cid_source_ppi = account.184.session_timer.enable = account.184.session_timer.expires = account.184.session_timer.refresher = account.184.enable_user_equal_phone = account.184.srtp_encryption = account.184.ptime = account.184.shared_line = %BWSHAREDLINE-BINARY-184% account.184.register_mac = account.184.register_line = account.184.reg_fail_retry_interval = account.184.reg_failed_retry_min_time = account.184.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.184.conf_type =
account.184.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-184%
account.184.sip_server_type = account.184.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.184.register_expires_overlap = account.184.subscribe_expires_overlap = account.184.auto_dial_enable = account.184.auto_dial_num = account.184.cp_source = account.184.transfer_refer_to_contact_header.enable = #V80 Add account.184.custom_ua = account.184.callpark_enable = account.184.check_cseq.enable = account.184.check_to_tag.enable = account.184.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 855 OF 1142
account.184.line_seize.expires = account.184.update_ack_while_dialing = account.184.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.184.always_fwd.enable =
account.184.always_fwd.target =
account.184.always_fwd.off_code =
account.184.always_fwd.on_code =
account.184.busy_fwd.enable =
account.184.busy_fwd.target =
account.184.busy_fwd.off_code =
account.184.busy_fwd.on_code =
account.184.timeout_fwd.enable =
account.184.timeout_fwd.target =
account.184.timeout_fwd.timeout =
account.184.timeout_fwd.off_code =
account.184.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.184.dnd.enable =
account.184.dnd.on_code =
account.184.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.184.reg.enable =
handset.184.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.184.xsi.user =%BWLOGIN-ID-184% account.184.xsi.password =%XSIPASSWORD-184% account.184.xsi.host =%XSP_ADDRESS% account.184.xsi.server_type = account.184.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 856 OF 1142
########################################################################## ############# handset.184.ldap.enable = handset.184.ldap.name_filter= handset.184.ldap.number_filter= handset.184.ldap.host= handset.184.ldap.port= handset.184.ldap.base= handset.184.ldap.user= handset.184.ldap.password= handset.184.ldap.max_hits= handset.184.ldap.name_attr= handset.184.ldap.numb_attr= handset.184.ldap.display_name= handset.184.ldap.version= handset.184.ldap.call_in_lookup= handset.184.ldap.ldap_sort= handset.184.ldap.tls_mode= handset.184.ldap.call_out_lookup= handset.184.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account185 Settings
##
##########################################################################
#############
account.185.enable=%BWLINE-BINARY-185% account.185.label=%BWEXTENSION-185% account.185.display_name=%BWCLID-185% account.185.auth_name=%BWAUTHUSER-185% account.185.user_name=%BWLINEPORT-185% account.185.password=%BWAUTHPASSWORD-185%
#W80B ADD account.185.sip_server.template = account.185.media_transmit.enable =
account.185.alarm.template = account.185.alarm.server = account.185.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.185.sip_server.1.failback_mode =
account.185.sip_server.1.failback_timeout =
account.185.sip_server.1.register_on_enable =
account.185.sip_server.1.failback_subscribe.enable =
account.185.sip_server.1.invite_retry_counts =
account.185.sip_server.1.only_signal_with_registered =
account.185.sip_server.2.failback_mode = account.185.sip_server.2.failback_timeout = account.185.sip_server.2.register_on_enable = account.185.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 857 OF 1142
account.185.sip_server.2.invite_retry_counts = account.185.sip_server.2.only_signal_with_registered =
account.185.naptr_build = account.185.fallback.redundancy_type = account.185.fallback.timeout =
account.185.dns_cache_type = account.185.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.185.anonymous_call =
account.185.reject_anonymous_call =
account.185.send_anonymous_code =
account.185.anonymous_call_oncode =
account.185.anonymous_call_offcode =
account.185.send_anonymous_rejection_code =
account.185.anonymous_reject_oncode =
account.185.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.185.codec.g722.enable =
account.185.codec.g722.priority =
account.185.codec.g729.enable = account.185.codec.g729.priority =
account.185.codec.g726_16.enable = account.185.codec.g726_16.priority =
account.185.codec.g726_24.enable = account.185.codec.g726_24.priority =
account.185.codec.g726_32.enable = account.185.codec.g726_32.priority =
account.185.codec.g726_40.enable = account.185.codec.g726_40.priority =
account.185.codec.ilbc.enable = account.185.codec.ilbc.priority =
account.185.codec.pcmu.enable = account.185.codec.pcmu.priority =
account.185.codec.pcma.enable = account.185.codec.pcma.priority =
account.185.codec.opus.enable = account.185.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 858 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.185.nat.nat_traversal = account.185.nat.udp_update_enable = account.185.nat.udp_update_time = account.185.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.185.blf.subscribe_period = account.185.dtmf.type = account.185.dtmf.dtmf_payload = account.185.dtmf.info_type = account.185.100rel_enable = account.185.subscribe_register = account.185.subscribe_mwi = account.185.subscribe_mwi_expires = account.185.subscribe_mwi_to_vm = voice_mail.number.185 = %BWVOICE-PORTAL-NUMBER-185% account.185.display_mwi.enable = account.185.cid_source = account.185.cid_source_privacy = account.185.cid_source_ppi = account.185.session_timer.enable = account.185.session_timer.expires = account.185.session_timer.refresher = account.185.enable_user_equal_phone = account.185.srtp_encryption = account.185.ptime = account.185.shared_line = %BWSHAREDLINE-BINARY-185% account.185.register_mac = account.185.register_line = account.185.reg_fail_retry_interval = account.185.reg_failed_retry_min_time = account.185.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.185.conf_type =
account.185.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-185%
account.185.sip_server_type = account.185.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 859 OF 1142
########################################################################## ############# ##DECT V81 Add
account.185.register_expires_overlap = account.185.subscribe_expires_overlap = account.185.auto_dial_enable = account.185.auto_dial_num = account.185.cp_source = account.185.transfer_refer_to_contact_header.enable = #V80 Add account.185.custom_ua = account.185.callpark_enable = account.185.check_cseq.enable = account.185.check_to_tag.enable = account.185.hold_use_inactive = account.185.line_seize.expires = account.185.update_ack_while_dialing = account.185.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.185.always_fwd.enable =
account.185.always_fwd.target =
account.185.always_fwd.off_code =
account.185.always_fwd.on_code =
account.185.busy_fwd.enable =
account.185.busy_fwd.target =
account.185.busy_fwd.off_code =
account.185.busy_fwd.on_code =
account.185.timeout_fwd.enable =
account.185.timeout_fwd.target =
account.185.timeout_fwd.timeout =
account.185.timeout_fwd.off_code =
account.185.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.185.dnd.enable =
account.185.dnd.on_code =
account.185.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.185.reg.enable =
handset.185.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 860 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.185.xsi.user =%BWLOGIN-ID-185% account.185.xsi.password =%XSIPASSWORD-185% account.185.xsi.host =%XSP_ADDRESS% account.185.xsi.server_type = account.185.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.185.ldap.enable =
handset.185.ldap.name_filter=
handset.185.ldap.number_filter=
handset.185.ldap.host=
handset.185.ldap.port=
handset.185.ldap.base=
handset.185.ldap.user=
handset.185.ldap.password=
handset.185.ldap.max_hits=
handset.185.ldap.name_attr=
handset.185.ldap.numb_attr=
handset.185.ldap.display_name=
handset.185.ldap.version=
handset.185.ldap.call_in_lookup=
handset.185.ldap.ldap_sort=
handset.185.ldap.tls_mode=
handset.185.ldap.call_out_lookup=
handset.185.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account186 Settings
##
##########################################################################
#############
account.186.enable=%BWLINE-BINARY-186% account.186.label=%BWEXTENSION-186% account.186.display_name=%BWCLID-186% account.186.auth_name=%BWAUTHUSER-186% account.186.user_name=%BWLINEPORT-186% account.186.password=%BWAUTHPASSWORD-186%
#W80B ADD account.186.sip_server.template = account.186.media_transmit.enable =
account.186.alarm.template = account.186.alarm.server = account.186.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 861 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.186.sip_server.1.failback_mode =
account.186.sip_server.1.failback_timeout =
account.186.sip_server.1.register_on_enable =
account.186.sip_server.1.failback_subscribe.enable =
account.186.sip_server.1.invite_retry_counts =
account.186.sip_server.1.only_signal_with_registered =
account.186.sip_server.2.failback_mode = account.186.sip_server.2.failback_timeout = account.186.sip_server.2.register_on_enable = account.186.sip_server.2.failback_subscribe.enable = account.186.sip_server.2.invite_retry_counts = account.186.sip_server.2.only_signal_with_registered =
account.186.naptr_build = account.186.fallback.redundancy_type = account.186.fallback.timeout =
account.186.dns_cache_type = account.186.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.186.anonymous_call =
account.186.reject_anonymous_call =
account.186.send_anonymous_code =
account.186.anonymous_call_oncode =
account.186.anonymous_call_offcode =
account.186.send_anonymous_rejection_code =
account.186.anonymous_reject_oncode =
account.186.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.186.codec.g722.enable =
account.186.codec.g722.priority =
account.186.codec.g729.enable = account.186.codec.g729.priority =
account.186.codec.g726_16.enable = account.186.codec.g726_16.priority =
account.186.codec.g726_24.enable = account.186.codec.g726_24.priority =
account.186.codec.g726_32.enable = account.186.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 862 OF 1142
account.186.codec.g726_40.enable = account.186.codec.g726_40.priority =
account.186.codec.ilbc.enable = account.186.codec.ilbc.priority =
account.186.codec.pcmu.enable = account.186.codec.pcmu.priority =
account.186.codec.pcma.enable = account.186.codec.pcma.priority =
account.186.codec.opus.enable = account.186.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.186.nat.nat_traversal = account.186.nat.udp_update_enable = account.186.nat.udp_update_time = account.186.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.186.blf.subscribe_period = account.186.dtmf.type = account.186.dtmf.dtmf_payload = account.186.dtmf.info_type = account.186.100rel_enable = account.186.subscribe_register = account.186.subscribe_mwi = account.186.subscribe_mwi_expires = account.186.subscribe_mwi_to_vm = voice_mail.number.186 = %BWVOICE-PORTAL-NUMBER-186% account.186.display_mwi.enable = account.186.cid_source = account.186.cid_source_privacy = account.186.cid_source_ppi = account.186.session_timer.enable = account.186.session_timer.expires = account.186.session_timer.refresher = account.186.enable_user_equal_phone = account.186.srtp_encryption = account.186.ptime = account.186.shared_line = %BWSHAREDLINE-BINARY-186% account.186.register_mac = account.186.register_line = account.186.reg_fail_retry_interval = account.186.reg_failed_retry_min_time = account.186.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 863 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.186.conf_type =
account.186.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-186%
account.186.sip_server_type = account.186.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.186.register_expires_overlap = account.186.subscribe_expires_overlap = account.186.auto_dial_enable = account.186.auto_dial_num = account.186.cp_source = account.186.transfer_refer_to_contact_header.enable = #V80 Add account.186.custom_ua = account.186.callpark_enable = account.186.check_cseq.enable = account.186.check_to_tag.enable = account.186.hold_use_inactive = account.186.line_seize.expires = account.186.update_ack_while_dialing = account.186.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.186.always_fwd.enable =
account.186.always_fwd.target =
account.186.always_fwd.off_code =
account.186.always_fwd.on_code =
account.186.busy_fwd.enable =
account.186.busy_fwd.target =
account.186.busy_fwd.off_code =
account.186.busy_fwd.on_code =
account.186.timeout_fwd.enable =
account.186.timeout_fwd.target =
account.186.timeout_fwd.timeout =
account.186.timeout_fwd.off_code =
account.186.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 864 OF 1142
account.186.dnd.enable = account.186.dnd.on_code = account.186.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.186.reg.enable =
handset.186.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.186.xsi.user =%BWLOGIN-ID-186% account.186.xsi.password =%XSIPASSWORD-186% account.186.xsi.host =%XSP_ADDRESS% account.186.xsi.server_type = account.186.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.186.ldap.enable =
handset.186.ldap.name_filter=
handset.186.ldap.number_filter=
handset.186.ldap.host=
handset.186.ldap.port=
handset.186.ldap.base=
handset.186.ldap.user=
handset.186.ldap.password=
handset.186.ldap.max_hits=
handset.186.ldap.name_attr=
handset.186.ldap.numb_attr=
handset.186.ldap.display_name=
handset.186.ldap.version=
handset.186.ldap.call_in_lookup=
handset.186.ldap.ldap_sort=
handset.186.ldap.tls_mode=
handset.186.ldap.call_out_lookup=
handset.186.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account187 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 865 OF 1142
account.187.enable=%BWLINE-BINARY-187% account.187.label=%BWEXTENSION-187% account.187.display_name=%BWCLID-187% account.187.auth_name=%BWAUTHUSER-187% account.187.user_name=%BWLINEPORT-187% account.187.password=%BWAUTHPASSWORD-187%
#W80B ADD account.187.sip_server.template = account.187.media_transmit.enable =
account.187.alarm.template = account.187.alarm.server = account.187.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.187.sip_server.1.failback_mode =
account.187.sip_server.1.failback_timeout =
account.187.sip_server.1.register_on_enable =
account.187.sip_server.1.failback_subscribe.enable =
account.187.sip_server.1.invite_retry_counts =
account.187.sip_server.1.only_signal_with_registered =
account.187.sip_server.2.failback_mode = account.187.sip_server.2.failback_timeout = account.187.sip_server.2.register_on_enable = account.187.sip_server.2.failback_subscribe.enable = account.187.sip_server.2.invite_retry_counts = account.187.sip_server.2.only_signal_with_registered =
account.187.naptr_build = account.187.fallback.redundancy_type = account.187.fallback.timeout =
account.187.dns_cache_type = account.187.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.187.anonymous_call =
account.187.reject_anonymous_call =
account.187.send_anonymous_code =
account.187.anonymous_call_oncode =
account.187.anonymous_call_offcode =
account.187.send_anonymous_rejection_code =
account.187.anonymous_reject_oncode =
account.187.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 866 OF 1142
########################################################################## ############# account.187.codec.g722.enable = account.187.codec.g722.priority =
account.187.codec.g729.enable = account.187.codec.g729.priority =
account.187.codec.g726_16.enable = account.187.codec.g726_16.priority =
account.187.codec.g726_24.enable = account.187.codec.g726_24.priority =
account.187.codec.g726_32.enable = account.187.codec.g726_32.priority =
account.187.codec.g726_40.enable = account.187.codec.g726_40.priority =
account.187.codec.ilbc.enable = account.187.codec.ilbc.priority =
account.187.codec.pcmu.enable = account.187.codec.pcmu.priority =
account.187.codec.pcma.enable = account.187.codec.pcma.priority =
account.187.codec.opus.enable = account.187.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.187.nat.nat_traversal = account.187.nat.udp_update_enable = account.187.nat.udp_update_time = account.187.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.187.blf.subscribe_period = account.187.dtmf.type = account.187.dtmf.dtmf_payload = account.187.dtmf.info_type = account.187.100rel_enable = account.187.subscribe_register = account.187.subscribe_mwi = account.187.subscribe_mwi_expires = account.187.subscribe_mwi_to_vm = voice_mail.number.187 = %BWVOICE-PORTAL-NUMBER-187% account.187.display_mwi.enable = account.187.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 867 OF 1142
account.187.cid_source_privacy = account.187.cid_source_ppi = account.187.session_timer.enable = account.187.session_timer.expires = account.187.session_timer.refresher = account.187.enable_user_equal_phone = account.187.srtp_encryption = account.187.ptime = account.187.shared_line = %BWSHAREDLINE-BINARY-187% account.187.register_mac = account.187.register_line = account.187.reg_fail_retry_interval = account.187.reg_failed_retry_min_time = account.187.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.187.conf_type =
account.187.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-187%
account.187.sip_server_type = account.187.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.187.register_expires_overlap = account.187.subscribe_expires_overlap = account.187.auto_dial_enable = account.187.auto_dial_num = account.187.cp_source = account.187.transfer_refer_to_contact_header.enable = #V80 Add account.187.custom_ua = account.187.callpark_enable = account.187.check_cseq.enable = account.187.check_to_tag.enable = account.187.hold_use_inactive = account.187.line_seize.expires = account.187.update_ack_while_dialing = account.187.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.187.always_fwd.enable =
account.187.always_fwd.target =
account.187.always_fwd.off_code =
account.187.always_fwd.on_code =
account.187.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 868 OF 1142
account.187.busy_fwd.target = account.187.busy_fwd.off_code = account.187.busy_fwd.on_code = account.187.timeout_fwd.enable = account.187.timeout_fwd.target = account.187.timeout_fwd.timeout = account.187.timeout_fwd.off_code = account.187.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.187.dnd.enable =
account.187.dnd.on_code =
account.187.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.187.reg.enable =
handset.187.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.187.xsi.user =%BWLOGIN-ID-187% account.187.xsi.password =%XSIPASSWORD-187% account.187.xsi.host =%XSP_ADDRESS% account.187.xsi.server_type = account.187.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.187.ldap.enable =
handset.187.ldap.name_filter=
handset.187.ldap.number_filter=
handset.187.ldap.host=
handset.187.ldap.port=
handset.187.ldap.base=
handset.187.ldap.user=
handset.187.ldap.password=
handset.187.ldap.max_hits=
handset.187.ldap.name_attr=
handset.187.ldap.numb_attr=
handset.187.ldap.display_name=
handset.187.ldap.version=
handset.187.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 869 OF 1142
handset.187.ldap.ldap_sort= handset.187.ldap.tls_mode= handset.187.ldap.call_out_lookup= handset.187.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account188 Settings
##
##########################################################################
#############
account.188.enable=%BWLINE-BINARY-188% account.188.label=%BWEXTENSION-188% account.188.display_name=%BWCLID-188% account.188.auth_name=%BWAUTHUSER-188% account.188.user_name=%BWLINEPORT-188% account.188.password=%BWAUTHPASSWORD-188%
#W80B ADD account.188.sip_server.template = account.188.media_transmit.enable =
account.188.alarm.template = account.188.alarm.server = account.188.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.188.sip_server.1.failback_mode =
account.188.sip_server.1.failback_timeout =
account.188.sip_server.1.register_on_enable =
account.188.sip_server.1.failback_subscribe.enable =
account.188.sip_server.1.invite_retry_counts =
account.188.sip_server.1.only_signal_with_registered =
account.188.sip_server.2.failback_mode = account.188.sip_server.2.failback_timeout = account.188.sip_server.2.register_on_enable = account.188.sip_server.2.failback_subscribe.enable = account.188.sip_server.2.invite_retry_counts = account.188.sip_server.2.only_signal_with_registered =
account.188.naptr_build = account.188.fallback.redundancy_type = account.188.fallback.timeout =
account.188.dns_cache_type = account.188.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 870 OF 1142
account.188.anonymous_call = account.188.reject_anonymous_call = account.188.send_anonymous_code = account.188.anonymous_call_oncode = account.188.anonymous_call_offcode = account.188.send_anonymous_rejection_code = account.188.anonymous_reject_oncode = account.188.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.188.codec.g722.enable =
account.188.codec.g722.priority =
account.188.codec.g729.enable = account.188.codec.g729.priority =
account.188.codec.g726_16.enable = account.188.codec.g726_16.priority =
account.188.codec.g726_24.enable = account.188.codec.g726_24.priority =
account.188.codec.g726_32.enable = account.188.codec.g726_32.priority =
account.188.codec.g726_40.enable = account.188.codec.g726_40.priority =
account.188.codec.ilbc.enable = account.188.codec.ilbc.priority =
account.188.codec.pcmu.enable = account.188.codec.pcmu.priority =
account.188.codec.pcma.enable = account.188.codec.pcma.priority =
account.188.codec.opus.enable = account.188.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.188.nat.nat_traversal = account.188.nat.udp_update_enable = account.188.nat.udp_update_time = account.188.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 871 OF 1142
########################################################################## #############
account.188.blf.subscribe_period = account.188.dtmf.type = account.188.dtmf.dtmf_payload = account.188.dtmf.info_type = account.188.100rel_enable = account.188.subscribe_register = account.188.subscribe_mwi = account.188.subscribe_mwi_expires = account.188.subscribe_mwi_to_vm = voice_mail.number.188 = %BWVOICE-PORTAL-NUMBER-188% account.188.display_mwi.enable = account.188.cid_source = account.188.cid_source_privacy = account.188.cid_source_ppi = account.188.session_timer.enable = account.188.session_timer.expires = account.188.session_timer.refresher = account.188.enable_user_equal_phone = account.188.srtp_encryption = account.188.ptime = account.188.shared_line = %BWSHAREDLINE-BINARY-188% account.188.register_mac = account.188.register_line = account.188.reg_fail_retry_interval = account.188.reg_failed_retry_min_time = account.188.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.188.conf_type =
account.188.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-188%
account.188.sip_server_type = account.188.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.188.register_expires_overlap = account.188.subscribe_expires_overlap = account.188.auto_dial_enable = account.188.auto_dial_num = account.188.cp_source = account.188.transfer_refer_to_contact_header.enable = #V80 Add account.188.custom_ua = account.188.callpark_enable = account.188.check_cseq.enable = account.188.check_to_tag.enable = account.188.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 872 OF 1142
account.188.line_seize.expires = account.188.update_ack_while_dialing = account.188.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.188.always_fwd.enable =
account.188.always_fwd.target =
account.188.always_fwd.off_code =
account.188.always_fwd.on_code =
account.188.busy_fwd.enable =
account.188.busy_fwd.target =
account.188.busy_fwd.off_code =
account.188.busy_fwd.on_code =
account.188.timeout_fwd.enable =
account.188.timeout_fwd.target =
account.188.timeout_fwd.timeout =
account.188.timeout_fwd.off_code =
account.188.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.188.dnd.enable =
account.188.dnd.on_code =
account.188.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.188.reg.enable =
handset.188.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.188.xsi.user =%BWLOGIN-ID-188% account.188.xsi.password =%XSIPASSWORD-188% account.188.xsi.host =%XSP_ADDRESS% account.188.xsi.server_type = account.188.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 873 OF 1142
########################################################################## ############# handset.188.ldap.enable = handset.188.ldap.name_filter= handset.188.ldap.number_filter= handset.188.ldap.host= handset.188.ldap.port= handset.188.ldap.base= handset.188.ldap.user= handset.188.ldap.password= handset.188.ldap.max_hits= handset.188.ldap.name_attr= handset.188.ldap.numb_attr= handset.188.ldap.display_name= handset.188.ldap.version= handset.188.ldap.call_in_lookup= handset.188.ldap.ldap_sort= handset.188.ldap.tls_mode= handset.188.ldap.call_out_lookup= handset.188.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account189 Settings
##
##########################################################################
#############
account.189.enable=%BWLINE-BINARY-189% account.189.label=%BWEXTENSION-189% account.189.display_name=%BWCLID-189% account.189.auth_name=%BWAUTHUSER-189% account.189.user_name=%BWLINEPORT-189% account.189.password=%BWAUTHPASSWORD-189%
#W80B ADD account.189.sip_server.template = account.189.media_transmit.enable =
account.189.alarm.template = account.189.alarm.server = account.189.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.189.sip_server.1.failback_mode =
account.189.sip_server.1.failback_timeout =
account.189.sip_server.1.register_on_enable =
account.189.sip_server.1.failback_subscribe.enable =
account.189.sip_server.1.invite_retry_counts =
account.189.sip_server.1.only_signal_with_registered =
account.189.sip_server.2.failback_mode = account.189.sip_server.2.failback_timeout = account.189.sip_server.2.register_on_enable = account.189.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 874 OF 1142
account.189.sip_server.2.invite_retry_counts = account.189.sip_server.2.only_signal_with_registered =
account.189.naptr_build = account.189.fallback.redundancy_type = account.189.fallback.timeout =
account.189.dns_cache_type = account.189.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.189.anonymous_call =
account.189.reject_anonymous_call =
account.189.send_anonymous_code =
account.189.anonymous_call_oncode =
account.189.anonymous_call_offcode =
account.189.send_anonymous_rejection_code =
account.189.anonymous_reject_oncode =
account.189.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.189.codec.g722.enable =
account.189.codec.g722.priority =
account.189.codec.g729.enable = account.189.codec.g729.priority =
account.189.codec.g726_16.enable = account.189.codec.g726_16.priority =
account.189.codec.g726_24.enable = account.189.codec.g726_24.priority =
account.189.codec.g726_32.enable = account.189.codec.g726_32.priority =
account.189.codec.g726_40.enable = account.189.codec.g726_40.priority =
account.189.codec.ilbc.enable = account.189.codec.ilbc.priority =
account.189.codec.pcmu.enable = account.189.codec.pcmu.priority =
account.189.codec.pcma.enable = account.189.codec.pcma.priority =
account.189.codec.opus.enable = account.189.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 875 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.189.nat.nat_traversal = account.189.nat.udp_update_enable = account.189.nat.udp_update_time = account.189.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.189.blf.subscribe_period = account.189.dtmf.type = account.189.dtmf.dtmf_payload = account.189.dtmf.info_type = account.189.100rel_enable = account.189.subscribe_register = account.189.subscribe_mwi = account.189.subscribe_mwi_expires = account.189.subscribe_mwi_to_vm = voice_mail.number.189 = %BWVOICE-PORTAL-NUMBER-189% account.189.display_mwi.enable = account.189.cid_source = account.189.cid_source_privacy = account.189.cid_source_ppi = account.189.session_timer.enable = account.189.session_timer.expires = account.189.session_timer.refresher = account.189.enable_user_equal_phone = account.189.srtp_encryption = account.189.ptime = account.189.shared_line = %BWSHAREDLINE-BINARY-189% account.189.register_mac = account.189.register_line = account.189.reg_fail_retry_interval = account.189.reg_failed_retry_min_time = account.189.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.189.conf_type =
account.189.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-189%
account.189.sip_server_type = account.189.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 876 OF 1142
########################################################################## ############# ##DECT V81 Add
account.189.register_expires_overlap = account.189.subscribe_expires_overlap = account.189.auto_dial_enable = account.189.auto_dial_num = account.189.cp_source = account.189.transfer_refer_to_contact_header.enable = #V80 Add account.189.custom_ua = account.189.callpark_enable = account.189.check_cseq.enable = account.189.check_to_tag.enable = account.189.hold_use_inactive = account.189.line_seize.expires = account.189.update_ack_while_dialing = account.189.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.189.always_fwd.enable =
account.189.always_fwd.target =
account.189.always_fwd.off_code =
account.189.always_fwd.on_code =
account.189.busy_fwd.enable =
account.189.busy_fwd.target =
account.189.busy_fwd.off_code =
account.189.busy_fwd.on_code =
account.189.timeout_fwd.enable =
account.189.timeout_fwd.target =
account.189.timeout_fwd.timeout =
account.189.timeout_fwd.off_code =
account.189.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.189.dnd.enable =
account.189.dnd.on_code =
account.189.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.189.reg.enable =
handset.189.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 877 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.189.xsi.user =%BWLOGIN-ID-189% account.189.xsi.password =%XSIPASSWORD-189% account.189.xsi.host =%XSP_ADDRESS% account.189.xsi.server_type = account.189.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.189.ldap.enable =
handset.189.ldap.name_filter=
handset.189.ldap.number_filter=
handset.189.ldap.host=
handset.189.ldap.port=
handset.189.ldap.base=
handset.189.ldap.user=
handset.189.ldap.password=
handset.189.ldap.max_hits=
handset.189.ldap.name_attr=
handset.189.ldap.numb_attr=
handset.189.ldap.display_name=
handset.189.ldap.version=
handset.189.ldap.call_in_lookup=
handset.189.ldap.ldap_sort=
handset.189.ldap.tls_mode=
handset.189.ldap.call_out_lookup=
handset.189.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account190 Settings
##
##########################################################################
#############
account.190.enable=%BWLINE-BINARY-190% account.190.label=%BWEXTENSION-190% account.190.display_name=%BWCLID-190% account.190.auth_name=%BWAUTHUSER-190% account.190.user_name=%BWLINEPORT-190% account.190.password=%BWAUTHPASSWORD-190%
#W80B ADD account.190.sip_server.template = account.190.media_transmit.enable =
account.190.alarm.template = account.190.alarm.server = account.190.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 878 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.190.sip_server.1.failback_mode =
account.190.sip_server.1.failback_timeout =
account.190.sip_server.1.register_on_enable =
account.190.sip_server.1.failback_subscribe.enable =
account.190.sip_server.1.invite_retry_counts =
account.190.sip_server.1.only_signal_with_registered =
account.190.sip_server.2.failback_mode = account.190.sip_server.2.failback_timeout = account.190.sip_server.2.register_on_enable = account.190.sip_server.2.failback_subscribe.enable = account.190.sip_server.2.invite_retry_counts = account.190.sip_server.2.only_signal_with_registered =
account.190.naptr_build = account.190.fallback.redundancy_type = account.190.fallback.timeout =
account.190.dns_cache_type = account.190.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.190.anonymous_call =
account.190.reject_anonymous_call =
account.190.send_anonymous_code =
account.190.anonymous_call_oncode =
account.190.anonymous_call_offcode =
account.190.send_anonymous_rejection_code =
account.190.anonymous_reject_oncode =
account.190.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.190.codec.g722.enable =
account.190.codec.g722.priority =
account.190.codec.g729.enable = account.190.codec.g729.priority =
account.190.codec.g726_16.enable = account.190.codec.g726_16.priority =
account.190.codec.g726_24.enable = account.190.codec.g726_24.priority =
account.190.codec.g726_32.enable = account.190.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 879 OF 1142
account.190.codec.g726_40.enable = account.190.codec.g726_40.priority =
account.190.codec.ilbc.enable = account.190.codec.ilbc.priority =
account.190.codec.pcmu.enable = account.190.codec.pcmu.priority =
account.190.codec.pcma.enable = account.190.codec.pcma.priority =
account.190.codec.opus.enable = account.190.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.190.nat.nat_traversal = account.190.nat.udp_update_enable = account.190.nat.udp_update_time = account.190.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.190.blf.subscribe_period = account.190.dtmf.type = account.190.dtmf.dtmf_payload = account.190.dtmf.info_type = account.190.100rel_enable = account.190.subscribe_register = account.190.subscribe_mwi = account.190.subscribe_mwi_expires = account.190.subscribe_mwi_to_vm = voice_mail.number.190 = %BWVOICE-PORTAL-NUMBER-190% account.190.display_mwi.enable = account.190.cid_source = account.190.cid_source_privacy = account.190.cid_source_ppi = account.190.session_timer.enable = account.190.session_timer.expires = account.190.session_timer.refresher = account.190.enable_user_equal_phone = account.190.srtp_encryption = account.190.ptime = account.190.shared_line = %BWSHAREDLINE-BINARY-190% account.190.register_mac = account.190.register_line = account.190.reg_fail_retry_interval = account.190.reg_failed_retry_min_time = account.190.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 880 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.190.conf_type =
account.190.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-190%
account.190.sip_server_type = account.190.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.190.register_expires_overlap = account.190.subscribe_expires_overlap = account.190.auto_dial_enable = account.190.auto_dial_num = account.190.cp_source = account.190.transfer_refer_to_contact_header.enable = #V80 Add account.190.custom_ua = account.190.callpark_enable = account.190.check_cseq.enable = account.190.check_to_tag.enable = account.190.hold_use_inactive = account.190.line_seize.expires = account.190.update_ack_while_dialing = account.190.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.190.always_fwd.enable =
account.190.always_fwd.target =
account.190.always_fwd.off_code =
account.190.always_fwd.on_code =
account.190.busy_fwd.enable =
account.190.busy_fwd.target =
account.190.busy_fwd.off_code =
account.190.busy_fwd.on_code =
account.190.timeout_fwd.enable =
account.190.timeout_fwd.target =
account.190.timeout_fwd.timeout =
account.190.timeout_fwd.off_code =
account.190.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 881 OF 1142
account.190.dnd.enable = account.190.dnd.on_code = account.190.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.190.reg.enable =
handset.190.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.190.xsi.user =%BWLOGIN-ID-190% account.190.xsi.password =%XSIPASSWORD-190% account.190.xsi.host =%XSP_ADDRESS% account.190.xsi.server_type = account.190.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.190.ldap.enable =
handset.190.ldap.name_filter=
handset.190.ldap.number_filter=
handset.190.ldap.host=
handset.190.ldap.port=
handset.190.ldap.base=
handset.190.ldap.user=
handset.190.ldap.password=
handset.190.ldap.max_hits=
handset.190.ldap.name_attr=
handset.190.ldap.numb_attr=
handset.190.ldap.display_name=
handset.190.ldap.version=
handset.190.ldap.call_in_lookup=
handset.190.ldap.ldap_sort=
handset.190.ldap.tls_mode=
handset.190.ldap.call_out_lookup=
handset.190.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account191 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 882 OF 1142
account.191.enable=%BWLINE-BINARY-191% account.191.label=%BWEXTENSION-191% account.191.display_name=%BWCLID-191% account.191.auth_name=%BWAUTHUSER-191% account.191.user_name=%BWLINEPORT-191% account.191.password=%BWAUTHPASSWORD-191%
#W80B ADD account.191.sip_server.template = account.191.media_transmit.enable =
account.191.alarm.template = account.191.alarm.server = account.191.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.191.sip_server.1.failback_mode =
account.191.sip_server.1.failback_timeout =
account.191.sip_server.1.register_on_enable =
account.191.sip_server.1.failback_subscribe.enable =
account.191.sip_server.1.invite_retry_counts =
account.191.sip_server.1.only_signal_with_registered =
account.191.sip_server.2.failback_mode = account.191.sip_server.2.failback_timeout = account.191.sip_server.2.register_on_enable = account.191.sip_server.2.failback_subscribe.enable = account.191.sip_server.2.invite_retry_counts = account.191.sip_server.2.only_signal_with_registered =
account.191.naptr_build = account.191.fallback.redundancy_type = account.191.fallback.timeout =
account.191.dns_cache_type = account.191.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.191.anonymous_call =
account.191.reject_anonymous_call =
account.191.send_anonymous_code =
account.191.anonymous_call_oncode =
account.191.anonymous_call_offcode =
account.191.send_anonymous_rejection_code =
account.191.anonymous_reject_oncode =
account.191.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 883 OF 1142
########################################################################## ############# account.191.codec.g722.enable = account.191.codec.g722.priority =
account.191.codec.g729.enable = account.191.codec.g729.priority =
account.191.codec.g726_16.enable = account.191.codec.g726_16.priority =
account.191.codec.g726_24.enable = account.191.codec.g726_24.priority =
account.191.codec.g726_32.enable = account.191.codec.g726_32.priority =
account.191.codec.g726_40.enable = account.191.codec.g726_40.priority =
account.191.codec.ilbc.enable = account.191.codec.ilbc.priority =
account.191.codec.pcmu.enable = account.191.codec.pcmu.priority =
account.191.codec.pcma.enable = account.191.codec.pcma.priority =
account.191.codec.opus.enable = account.191.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.191.nat.nat_traversal = account.191.nat.udp_update_enable = account.191.nat.udp_update_time = account.191.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.191.blf.subscribe_period = account.191.dtmf.type = account.191.dtmf.dtmf_payload = account.191.dtmf.info_type = account.191.100rel_enable = account.191.subscribe_register = account.191.subscribe_mwi = account.191.subscribe_mwi_expires = account.191.subscribe_mwi_to_vm = voice_mail.number.191 = %BWVOICE-PORTAL-NUMBER-191% account.191.display_mwi.enable = account.191.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 884 OF 1142
account.191.cid_source_privacy = account.191.cid_source_ppi = account.191.session_timer.enable = account.191.session_timer.expires = account.191.session_timer.refresher = account.191.enable_user_equal_phone = account.191.srtp_encryption = account.191.ptime = account.191.shared_line = %BWSHAREDLINE-BINARY-191% account.191.register_mac = account.191.register_line = account.191.reg_fail_retry_interval = account.191.reg_failed_retry_min_time = account.191.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.191.conf_type =
account.191.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-191%
account.191.sip_server_type = account.191.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.191.register_expires_overlap = account.191.subscribe_expires_overlap = account.191.auto_dial_enable = account.191.auto_dial_num = account.191.cp_source = account.191.transfer_refer_to_contact_header.enable = #V80 Add account.191.custom_ua = account.191.callpark_enable = account.191.check_cseq.enable = account.191.check_to_tag.enable = account.191.hold_use_inactive = account.191.line_seize.expires = account.191.update_ack_while_dialing = account.191.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.191.always_fwd.enable =
account.191.always_fwd.target =
account.191.always_fwd.off_code =
account.191.always_fwd.on_code =
account.191.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 885 OF 1142
account.191.busy_fwd.target = account.191.busy_fwd.off_code = account.191.busy_fwd.on_code = account.191.timeout_fwd.enable = account.191.timeout_fwd.target = account.191.timeout_fwd.timeout = account.191.timeout_fwd.off_code = account.191.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.191.dnd.enable =
account.191.dnd.on_code =
account.191.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.191.reg.enable =
handset.191.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.191.xsi.user =%BWLOGIN-ID-191% account.191.xsi.password =%XSIPASSWORD-191% account.191.xsi.host =%XSP_ADDRESS% account.191.xsi.server_type = account.191.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.191.ldap.enable =
handset.191.ldap.name_filter=
handset.191.ldap.number_filter=
handset.191.ldap.host=
handset.191.ldap.port=
handset.191.ldap.base=
handset.191.ldap.user=
handset.191.ldap.password=
handset.191.ldap.max_hits=
handset.191.ldap.name_attr=
handset.191.ldap.numb_attr=
handset.191.ldap.display_name=
handset.191.ldap.version=
handset.191.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 886 OF 1142
handset.191.ldap.ldap_sort= handset.191.ldap.tls_mode= handset.191.ldap.call_out_lookup= handset.191.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account192 Settings
##
##########################################################################
#############
account.192.enable=%BWLINE-BINARY-192% account.192.label=%BWEXTENSION-192% account.192.display_name=%BWCLID-192% account.192.auth_name=%BWAUTHUSER-192% account.192.user_name=%BWLINEPORT-192% account.192.password=%BWAUTHPASSWORD-192%
#W80B ADD account.192.sip_server.template = account.192.media_transmit.enable =
account.192.alarm.template = account.192.alarm.server = account.192.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.192.sip_server.1.failback_mode =
account.192.sip_server.1.failback_timeout =
account.192.sip_server.1.register_on_enable =
account.192.sip_server.1.failback_subscribe.enable =
account.192.sip_server.1.invite_retry_counts =
account.192.sip_server.1.only_signal_with_registered =
account.192.sip_server.2.failback_mode = account.192.sip_server.2.failback_timeout = account.192.sip_server.2.register_on_enable = account.192.sip_server.2.failback_subscribe.enable = account.192.sip_server.2.invite_retry_counts = account.192.sip_server.2.only_signal_with_registered =
account.192.naptr_build = account.192.fallback.redundancy_type = account.192.fallback.timeout =
account.192.dns_cache_type = account.192.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 887 OF 1142
account.192.anonymous_call = account.192.reject_anonymous_call = account.192.send_anonymous_code = account.192.anonymous_call_oncode = account.192.anonymous_call_offcode = account.192.send_anonymous_rejection_code = account.192.anonymous_reject_oncode = account.192.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.192.codec.g722.enable =
account.192.codec.g722.priority =
account.192.codec.g729.enable = account.192.codec.g729.priority =
account.192.codec.g726_16.enable = account.192.codec.g726_16.priority =
account.192.codec.g726_24.enable = account.192.codec.g726_24.priority =
account.192.codec.g726_32.enable = account.192.codec.g726_32.priority =
account.192.codec.g726_40.enable = account.192.codec.g726_40.priority =
account.192.codec.ilbc.enable = account.192.codec.ilbc.priority =
account.192.codec.pcmu.enable = account.192.codec.pcmu.priority =
account.192.codec.pcma.enable = account.192.codec.pcma.priority =
account.192.codec.opus.enable = account.192.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.192.nat.nat_traversal = account.192.nat.udp_update_enable = account.192.nat.udp_update_time = account.192.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 888 OF 1142
########################################################################## #############
account.192.blf.subscribe_period = account.192.dtmf.type = account.192.dtmf.dtmf_payload = account.192.dtmf.info_type = account.192.100rel_enable = account.192.subscribe_register = account.192.subscribe_mwi = account.192.subscribe_mwi_expires = account.192.subscribe_mwi_to_vm = voice_mail.number.192 = %BWVOICE-PORTAL-NUMBER-192% account.192.display_mwi.enable = account.192.cid_source = account.192.cid_source_privacy = account.192.cid_source_ppi = account.192.session_timer.enable = account.192.session_timer.expires = account.192.session_timer.refresher = account.192.enable_user_equal_phone = account.192.srtp_encryption = account.192.ptime = account.192.shared_line = %BWSHAREDLINE-BINARY-192% account.192.register_mac = account.192.register_line = account.192.reg_fail_retry_interval = account.192.reg_failed_retry_min_time = account.192.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.192.conf_type =
account.192.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-192%
account.192.sip_server_type = account.192.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.192.register_expires_overlap = account.192.subscribe_expires_overlap = account.192.auto_dial_enable = account.192.auto_dial_num = account.192.cp_source = account.192.transfer_refer_to_contact_header.enable = #V80 Add account.192.custom_ua = account.192.callpark_enable = account.192.check_cseq.enable = account.192.check_to_tag.enable = account.192.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 889 OF 1142
account.192.line_seize.expires = account.192.update_ack_while_dialing = account.192.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.192.always_fwd.enable =
account.192.always_fwd.target =
account.192.always_fwd.off_code =
account.192.always_fwd.on_code =
account.192.busy_fwd.enable =
account.192.busy_fwd.target =
account.192.busy_fwd.off_code =
account.192.busy_fwd.on_code =
account.192.timeout_fwd.enable =
account.192.timeout_fwd.target =
account.192.timeout_fwd.timeout =
account.192.timeout_fwd.off_code =
account.192.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.192.dnd.enable =
account.192.dnd.on_code =
account.192.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.192.reg.enable =
handset.192.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.192.xsi.user =%BWLOGIN-ID-192% account.192.xsi.password =%XSIPASSWORD-192% account.192.xsi.host =%XSP_ADDRESS% account.192.xsi.server_type = account.192.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 890 OF 1142
########################################################################## ############# handset.192.ldap.enable = handset.192.ldap.name_filter= handset.192.ldap.number_filter= handset.192.ldap.host= handset.192.ldap.port= handset.192.ldap.base= handset.192.ldap.user= handset.192.ldap.password= handset.192.ldap.max_hits= handset.192.ldap.name_attr= handset.192.ldap.numb_attr= handset.192.ldap.display_name= handset.192.ldap.version= handset.192.ldap.call_in_lookup= handset.192.ldap.ldap_sort= handset.192.ldap.tls_mode= handset.192.ldap.call_out_lookup= handset.192.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account193 Settings
##
##########################################################################
#############
account.193.enable=%BWLINE-BINARY-193% account.193.label=%BWEXTENSION-193% account.193.display_name=%BWCLID-193% account.193.auth_name=%BWAUTHUSER-193% account.193.user_name=%BWLINEPORT-193% account.193.password=%BWAUTHPASSWORD-193%
#W80B ADD account.193.sip_server.template = account.193.media_transmit.enable =
account.193.alarm.template = account.193.alarm.server = account.193.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.193.sip_server.1.failback_mode =
account.193.sip_server.1.failback_timeout =
account.193.sip_server.1.register_on_enable =
account.193.sip_server.1.failback_subscribe.enable =
account.193.sip_server.1.invite_retry_counts =
account.193.sip_server.1.only_signal_with_registered =
account.193.sip_server.2.failback_mode = account.193.sip_server.2.failback_timeout = account.193.sip_server.2.register_on_enable = account.193.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 891 OF 1142
account.193.sip_server.2.invite_retry_counts = account.193.sip_server.2.only_signal_with_registered =
account.193.naptr_build = account.193.fallback.redundancy_type = account.193.fallback.timeout =
account.193.dns_cache_type = account.193.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.193.anonymous_call =
account.193.reject_anonymous_call =
account.193.send_anonymous_code =
account.193.anonymous_call_oncode =
account.193.anonymous_call_offcode =
account.193.send_anonymous_rejection_code =
account.193.anonymous_reject_oncode =
account.193.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.193.codec.g722.enable =
account.193.codec.g722.priority =
account.193.codec.g729.enable = account.193.codec.g729.priority =
account.193.codec.g726_16.enable = account.193.codec.g726_16.priority =
account.193.codec.g726_24.enable = account.193.codec.g726_24.priority =
account.193.codec.g726_32.enable = account.193.codec.g726_32.priority =
account.193.codec.g726_40.enable = account.193.codec.g726_40.priority =
account.193.codec.ilbc.enable = account.193.codec.ilbc.priority =
account.193.codec.pcmu.enable = account.193.codec.pcmu.priority =
account.193.codec.pcma.enable = account.193.codec.pcma.priority =
account.193.codec.opus.enable = account.193.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 892 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.193.nat.nat_traversal = account.193.nat.udp_update_enable = account.193.nat.udp_update_time = account.193.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.193.blf.subscribe_period = account.193.dtmf.type = account.193.dtmf.dtmf_payload = account.193.dtmf.info_type = account.193.100rel_enable = account.193.subscribe_register = account.193.subscribe_mwi = account.193.subscribe_mwi_expires = account.193.subscribe_mwi_to_vm = voice_mail.number.193 = %BWVOICE-PORTAL-NUMBER-193% account.193.display_mwi.enable = account.193.cid_source = account.193.cid_source_privacy = account.193.cid_source_ppi = account.193.session_timer.enable = account.193.session_timer.expires = account.193.session_timer.refresher = account.193.enable_user_equal_phone = account.193.srtp_encryption = account.193.ptime = account.193.shared_line = %BWSHAREDLINE-BINARY-193% account.193.register_mac = account.193.register_line = account.193.reg_fail_retry_interval = account.193.reg_failed_retry_min_time = account.193.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.193.conf_type =
account.193.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-193%
account.193.sip_server_type = account.193.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 893 OF 1142
########################################################################## ############# ##DECT V81 Add
account.193.register_expires_overlap = account.193.subscribe_expires_overlap = account.193.auto_dial_enable = account.193.auto_dial_num = account.193.cp_source = account.193.transfer_refer_to_contact_header.enable = #V80 Add account.193.custom_ua = account.193.callpark_enable = account.193.check_cseq.enable = account.193.check_to_tag.enable = account.193.hold_use_inactive = account.193.line_seize.expires = account.193.update_ack_while_dialing = account.193.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.193.always_fwd.enable =
account.193.always_fwd.target =
account.193.always_fwd.off_code =
account.193.always_fwd.on_code =
account.193.busy_fwd.enable =
account.193.busy_fwd.target =
account.193.busy_fwd.off_code =
account.193.busy_fwd.on_code =
account.193.timeout_fwd.enable =
account.193.timeout_fwd.target =
account.193.timeout_fwd.timeout =
account.193.timeout_fwd.off_code =
account.193.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.193.dnd.enable =
account.193.dnd.on_code =
account.193.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.193.reg.enable =
handset.193.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 894 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.193.xsi.user =%BWLOGIN-ID-193% account.193.xsi.password =%XSIPASSWORD-193% account.193.xsi.host =%XSP_ADDRESS% account.193.xsi.server_type = account.193.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.193.ldap.enable =
handset.193.ldap.name_filter=
handset.193.ldap.number_filter=
handset.193.ldap.host=
handset.193.ldap.port=
handset.193.ldap.base=
handset.193.ldap.user=
handset.193.ldap.password=
handset.193.ldap.max_hits=
handset.193.ldap.name_attr=
handset.193.ldap.numb_attr=
handset.193.ldap.display_name=
handset.193.ldap.version=
handset.193.ldap.call_in_lookup=
handset.193.ldap.ldap_sort=
handset.193.ldap.tls_mode=
handset.193.ldap.call_out_lookup=
handset.193.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account194 Settings
##
##########################################################################
#############
account.194.enable=%BWLINE-BINARY-194% account.194.label=%BWEXTENSION-194% account.194.display_name=%BWCLID-194% account.194.auth_name=%BWAUTHUSER-194% account.194.user_name=%BWLINEPORT-194% account.194.password=%BWAUTHPASSWORD-194%
#W80B ADD account.194.sip_server.template = account.194.media_transmit.enable =
account.194.alarm.template = account.194.alarm.server = account.194.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 895 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.194.sip_server.1.failback_mode =
account.194.sip_server.1.failback_timeout =
account.194.sip_server.1.register_on_enable =
account.194.sip_server.1.failback_subscribe.enable =
account.194.sip_server.1.invite_retry_counts =
account.194.sip_server.1.only_signal_with_registered =
account.194.sip_server.2.failback_mode = account.194.sip_server.2.failback_timeout = account.194.sip_server.2.register_on_enable = account.194.sip_server.2.failback_subscribe.enable = account.194.sip_server.2.invite_retry_counts = account.194.sip_server.2.only_signal_with_registered =
account.194.naptr_build = account.194.fallback.redundancy_type = account.194.fallback.timeout =
account.194.dns_cache_type = account.194.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.194.anonymous_call =
account.194.reject_anonymous_call =
account.194.send_anonymous_code =
account.194.anonymous_call_oncode =
account.194.anonymous_call_offcode =
account.194.send_anonymous_rejection_code =
account.194.anonymous_reject_oncode =
account.194.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.194.codec.g722.enable =
account.194.codec.g722.priority =
account.194.codec.g729.enable = account.194.codec.g729.priority =
account.194.codec.g726_16.enable = account.194.codec.g726_16.priority =
account.194.codec.g726_24.enable = account.194.codec.g726_24.priority =
account.194.codec.g726_32.enable = account.194.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 896 OF 1142
account.194.codec.g726_40.enable = account.194.codec.g726_40.priority =
account.194.codec.ilbc.enable = account.194.codec.ilbc.priority =
account.194.codec.pcmu.enable = account.194.codec.pcmu.priority =
account.194.codec.pcma.enable = account.194.codec.pcma.priority =
account.194.codec.opus.enable = account.194.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.194.nat.nat_traversal = account.194.nat.udp_update_enable = account.194.nat.udp_update_time = account.194.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.194.blf.subscribe_period = account.194.dtmf.type = account.194.dtmf.dtmf_payload = account.194.dtmf.info_type = account.194.100rel_enable = account.194.subscribe_register = account.194.subscribe_mwi = account.194.subscribe_mwi_expires = account.194.subscribe_mwi_to_vm = voice_mail.number.194 = %BWVOICE-PORTAL-NUMBER-194% account.194.display_mwi.enable = account.194.cid_source = account.194.cid_source_privacy = account.194.cid_source_ppi = account.194.session_timer.enable = account.194.session_timer.expires = account.194.session_timer.refresher = account.194.enable_user_equal_phone = account.194.srtp_encryption = account.194.ptime = account.194.shared_line = %BWSHAREDLINE-BINARY-194% account.194.register_mac = account.194.register_line = account.194.reg_fail_retry_interval = account.194.reg_failed_retry_min_time = account.194.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 897 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.194.conf_type =
account.194.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-194%
account.194.sip_server_type = account.194.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.194.register_expires_overlap = account.194.subscribe_expires_overlap = account.194.auto_dial_enable = account.194.auto_dial_num = account.194.cp_source = account.194.transfer_refer_to_contact_header.enable = #V80 Add account.194.custom_ua = account.194.callpark_enable = account.194.check_cseq.enable = account.194.check_to_tag.enable = account.194.hold_use_inactive = account.194.line_seize.expires = account.194.update_ack_while_dialing = account.194.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.194.always_fwd.enable =
account.194.always_fwd.target =
account.194.always_fwd.off_code =
account.194.always_fwd.on_code =
account.194.busy_fwd.enable =
account.194.busy_fwd.target =
account.194.busy_fwd.off_code =
account.194.busy_fwd.on_code =
account.194.timeout_fwd.enable =
account.194.timeout_fwd.target =
account.194.timeout_fwd.timeout =
account.194.timeout_fwd.off_code =
account.194.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 898 OF 1142
account.194.dnd.enable = account.194.dnd.on_code = account.194.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.194.reg.enable =
handset.194.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.194.xsi.user =%BWLOGIN-ID-194% account.194.xsi.password =%XSIPASSWORD-194% account.194.xsi.host =%XSP_ADDRESS% account.194.xsi.server_type = account.194.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.194.ldap.enable =
handset.194.ldap.name_filter=
handset.194.ldap.number_filter=
handset.194.ldap.host=
handset.194.ldap.port=
handset.194.ldap.base=
handset.194.ldap.user=
handset.194.ldap.password=
handset.194.ldap.max_hits=
handset.194.ldap.name_attr=
handset.194.ldap.numb_attr=
handset.194.ldap.display_name=
handset.194.ldap.version=
handset.194.ldap.call_in_lookup=
handset.194.ldap.ldap_sort=
handset.194.ldap.tls_mode=
handset.194.ldap.call_out_lookup=
handset.194.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account195 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 899 OF 1142
account.195.enable=%BWLINE-BINARY-195% account.195.label=%BWEXTENSION-195% account.195.display_name=%BWCLID-195% account.195.auth_name=%BWAUTHUSER-195% account.195.user_name=%BWLINEPORT-195% account.195.password=%BWAUTHPASSWORD-195%
#W80B ADD account.195.sip_server.template = account.195.media_transmit.enable =
account.195.alarm.template = account.195.alarm.server = account.195.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.195.sip_server.1.failback_mode =
account.195.sip_server.1.failback_timeout =
account.195.sip_server.1.register_on_enable =
account.195.sip_server.1.failback_subscribe.enable =
account.195.sip_server.1.invite_retry_counts =
account.195.sip_server.1.only_signal_with_registered =
account.195.sip_server.2.failback_mode = account.195.sip_server.2.failback_timeout = account.195.sip_server.2.register_on_enable = account.195.sip_server.2.failback_subscribe.enable = account.195.sip_server.2.invite_retry_counts = account.195.sip_server.2.only_signal_with_registered =
account.195.naptr_build = account.195.fallback.redundancy_type = account.195.fallback.timeout =
account.195.dns_cache_type = account.195.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.195.anonymous_call =
account.195.reject_anonymous_call =
account.195.send_anonymous_code =
account.195.anonymous_call_oncode =
account.195.anonymous_call_offcode =
account.195.send_anonymous_rejection_code =
account.195.anonymous_reject_oncode =
account.195.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 900 OF 1142
########################################################################## ############# account.195.codec.g722.enable = account.195.codec.g722.priority =
account.195.codec.g729.enable = account.195.codec.g729.priority =
account.195.codec.g726_16.enable = account.195.codec.g726_16.priority =
account.195.codec.g726_24.enable = account.195.codec.g726_24.priority =
account.195.codec.g726_32.enable = account.195.codec.g726_32.priority =
account.195.codec.g726_40.enable = account.195.codec.g726_40.priority =
account.195.codec.ilbc.enable = account.195.codec.ilbc.priority =
account.195.codec.pcmu.enable = account.195.codec.pcmu.priority =
account.195.codec.pcma.enable = account.195.codec.pcma.priority =
account.195.codec.opus.enable = account.195.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.195.nat.nat_traversal = account.195.nat.udp_update_enable = account.195.nat.udp_update_time = account.195.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.195.blf.subscribe_period = account.195.dtmf.type = account.195.dtmf.dtmf_payload = account.195.dtmf.info_type = account.195.100rel_enable = account.195.subscribe_register = account.195.subscribe_mwi = account.195.subscribe_mwi_expires = account.195.subscribe_mwi_to_vm = voice_mail.number.195 = %BWVOICE-PORTAL-NUMBER-195% account.195.display_mwi.enable = account.195.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 901 OF 1142
account.195.cid_source_privacy = account.195.cid_source_ppi = account.195.session_timer.enable = account.195.session_timer.expires = account.195.session_timer.refresher = account.195.enable_user_equal_phone = account.195.srtp_encryption = account.195.ptime = account.195.shared_line = %BWSHAREDLINE-BINARY-195% account.195.register_mac = account.195.register_line = account.195.reg_fail_retry_interval = account.195.reg_failed_retry_min_time = account.195.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.195.conf_type =
account.195.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-195%
account.195.sip_server_type = account.195.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.195.register_expires_overlap = account.195.subscribe_expires_overlap = account.195.auto_dial_enable = account.195.auto_dial_num = account.195.cp_source = account.195.transfer_refer_to_contact_header.enable = #V80 Add account.195.custom_ua = account.195.callpark_enable = account.195.check_cseq.enable = account.195.check_to_tag.enable = account.195.hold_use_inactive = account.195.line_seize.expires = account.195.update_ack_while_dialing = account.195.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.195.always_fwd.enable =
account.195.always_fwd.target =
account.195.always_fwd.off_code =
account.195.always_fwd.on_code =
account.195.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 902 OF 1142
account.195.busy_fwd.target = account.195.busy_fwd.off_code = account.195.busy_fwd.on_code = account.195.timeout_fwd.enable = account.195.timeout_fwd.target = account.195.timeout_fwd.timeout = account.195.timeout_fwd.off_code = account.195.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.195.dnd.enable =
account.195.dnd.on_code =
account.195.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.195.reg.enable =
handset.195.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.195.xsi.user =%BWLOGIN-ID-195% account.195.xsi.password =%XSIPASSWORD-195% account.195.xsi.host =%XSP_ADDRESS% account.195.xsi.server_type = account.195.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.195.ldap.enable =
handset.195.ldap.name_filter=
handset.195.ldap.number_filter=
handset.195.ldap.host=
handset.195.ldap.port=
handset.195.ldap.base=
handset.195.ldap.user=
handset.195.ldap.password=
handset.195.ldap.max_hits=
handset.195.ldap.name_attr=
handset.195.ldap.numb_attr=
handset.195.ldap.display_name=
handset.195.ldap.version=
handset.195.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 903 OF 1142
handset.195.ldap.ldap_sort= handset.195.ldap.tls_mode= handset.195.ldap.call_out_lookup= handset.195.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account196 Settings
##
##########################################################################
#############
account.196.enable=%BWLINE-BINARY-196% account.196.label=%BWEXTENSION-196% account.196.display_name=%BWCLID-196% account.196.auth_name=%BWAUTHUSER-196% account.196.user_name=%BWLINEPORT-196% account.196.password=%BWAUTHPASSWORD-196%
#W80B ADD account.196.sip_server.template = account.196.media_transmit.enable =
account.196.alarm.template = account.196.alarm.server = account.196.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.196.sip_server.1.failback_mode =
account.196.sip_server.1.failback_timeout =
account.196.sip_server.1.register_on_enable =
account.196.sip_server.1.failback_subscribe.enable =
account.196.sip_server.1.invite_retry_counts =
account.196.sip_server.1.only_signal_with_registered =
account.196.sip_server.2.failback_mode = account.196.sip_server.2.failback_timeout = account.196.sip_server.2.register_on_enable = account.196.sip_server.2.failback_subscribe.enable = account.196.sip_server.2.invite_retry_counts = account.196.sip_server.2.only_signal_with_registered =
account.196.naptr_build = account.196.fallback.redundancy_type = account.196.fallback.timeout =
account.196.dns_cache_type = account.196.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 904 OF 1142
account.196.anonymous_call = account.196.reject_anonymous_call = account.196.send_anonymous_code = account.196.anonymous_call_oncode = account.196.anonymous_call_offcode = account.196.send_anonymous_rejection_code = account.196.anonymous_reject_oncode = account.196.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.196.codec.g722.enable =
account.196.codec.g722.priority =
account.196.codec.g729.enable = account.196.codec.g729.priority =
account.196.codec.g726_16.enable = account.196.codec.g726_16.priority =
account.196.codec.g726_24.enable = account.196.codec.g726_24.priority =
account.196.codec.g726_32.enable = account.196.codec.g726_32.priority =
account.196.codec.g726_40.enable = account.196.codec.g726_40.priority =
account.196.codec.ilbc.enable = account.196.codec.ilbc.priority =
account.196.codec.pcmu.enable = account.196.codec.pcmu.priority =
account.196.codec.pcma.enable = account.196.codec.pcma.priority =
account.196.codec.opus.enable = account.196.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.196.nat.nat_traversal = account.196.nat.udp_update_enable = account.196.nat.udp_update_time = account.196.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 905 OF 1142
########################################################################## #############
account.196.blf.subscribe_period = account.196.dtmf.type = account.196.dtmf.dtmf_payload = account.196.dtmf.info_type = account.196.100rel_enable = account.196.subscribe_register = account.196.subscribe_mwi = account.196.subscribe_mwi_expires = account.196.subscribe_mwi_to_vm = voice_mail.number.196 = %BWVOICE-PORTAL-NUMBER-196% account.196.display_mwi.enable = account.196.cid_source = account.196.cid_source_privacy = account.196.cid_source_ppi = account.196.session_timer.enable = account.196.session_timer.expires = account.196.session_timer.refresher = account.196.enable_user_equal_phone = account.196.srtp_encryption = account.196.ptime = account.196.shared_line = %BWSHAREDLINE-BINARY-196% account.196.register_mac = account.196.register_line = account.196.reg_fail_retry_interval = account.196.reg_failed_retry_min_time = account.196.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.196.conf_type =
account.196.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-196%
account.196.sip_server_type = account.196.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.196.register_expires_overlap = account.196.subscribe_expires_overlap = account.196.auto_dial_enable = account.196.auto_dial_num = account.196.cp_source = account.196.transfer_refer_to_contact_header.enable = #V80 Add account.196.custom_ua = account.196.callpark_enable = account.196.check_cseq.enable = account.196.check_to_tag.enable = account.196.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 906 OF 1142
account.196.line_seize.expires = account.196.update_ack_while_dialing = account.196.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.196.always_fwd.enable =
account.196.always_fwd.target =
account.196.always_fwd.off_code =
account.196.always_fwd.on_code =
account.196.busy_fwd.enable =
account.196.busy_fwd.target =
account.196.busy_fwd.off_code =
account.196.busy_fwd.on_code =
account.196.timeout_fwd.enable =
account.196.timeout_fwd.target =
account.196.timeout_fwd.timeout =
account.196.timeout_fwd.off_code =
account.196.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.196.dnd.enable =
account.196.dnd.on_code =
account.196.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.196.reg.enable =
handset.196.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.196.xsi.user =%BWLOGIN-ID-196% account.196.xsi.password =%XSIPASSWORD-196% account.196.xsi.host =%XSP_ADDRESS% account.196.xsi.server_type = account.196.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 907 OF 1142
########################################################################## ############# handset.196.ldap.enable = handset.196.ldap.name_filter= handset.196.ldap.number_filter= handset.196.ldap.host= handset.196.ldap.port= handset.196.ldap.base= handset.196.ldap.user= handset.196.ldap.password= handset.196.ldap.max_hits= handset.196.ldap.name_attr= handset.196.ldap.numb_attr= handset.196.ldap.display_name= handset.196.ldap.version= handset.196.ldap.call_in_lookup= handset.196.ldap.ldap_sort= handset.196.ldap.tls_mode= handset.196.ldap.call_out_lookup= handset.196.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account197 Settings
##
##########################################################################
#############
account.197.enable=%BWLINE-BINARY-197% account.197.label=%BWEXTENSION-197% account.197.display_name=%BWCLID-197% account.197.auth_name=%BWAUTHUSER-197% account.197.user_name=%BWLINEPORT-197% account.197.password=%BWAUTHPASSWORD-197%
#W80B ADD account.197.sip_server.template = account.197.media_transmit.enable =
account.197.alarm.template = account.197.alarm.server = account.197.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.197.sip_server.1.failback_mode =
account.197.sip_server.1.failback_timeout =
account.197.sip_server.1.register_on_enable =
account.197.sip_server.1.failback_subscribe.enable =
account.197.sip_server.1.invite_retry_counts =
account.197.sip_server.1.only_signal_with_registered =
account.197.sip_server.2.failback_mode = account.197.sip_server.2.failback_timeout = account.197.sip_server.2.register_on_enable = account.197.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 908 OF 1142
account.197.sip_server.2.invite_retry_counts = account.197.sip_server.2.only_signal_with_registered =
account.197.naptr_build = account.197.fallback.redundancy_type = account.197.fallback.timeout =
account.197.dns_cache_type = account.197.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.197.anonymous_call =
account.197.reject_anonymous_call =
account.197.send_anonymous_code =
account.197.anonymous_call_oncode =
account.197.anonymous_call_offcode =
account.197.send_anonymous_rejection_code =
account.197.anonymous_reject_oncode =
account.197.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.197.codec.g722.enable =
account.197.codec.g722.priority =
account.197.codec.g729.enable = account.197.codec.g729.priority =
account.197.codec.g726_16.enable = account.197.codec.g726_16.priority =
account.197.codec.g726_24.enable = account.197.codec.g726_24.priority =
account.197.codec.g726_32.enable = account.197.codec.g726_32.priority =
account.197.codec.g726_40.enable = account.197.codec.g726_40.priority =
account.197.codec.ilbc.enable = account.197.codec.ilbc.priority =
account.197.codec.pcmu.enable = account.197.codec.pcmu.priority =
account.197.codec.pcma.enable = account.197.codec.pcma.priority =
account.197.codec.opus.enable = account.197.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 909 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.197.nat.nat_traversal = account.197.nat.udp_update_enable = account.197.nat.udp_update_time = account.197.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.197.blf.subscribe_period = account.197.dtmf.type = account.197.dtmf.dtmf_payload = account.197.dtmf.info_type = account.197.100rel_enable = account.197.subscribe_register = account.197.subscribe_mwi = account.197.subscribe_mwi_expires = account.197.subscribe_mwi_to_vm = voice_mail.number.197 = %BWVOICE-PORTAL-NUMBER-197% account.197.display_mwi.enable = account.197.cid_source = account.197.cid_source_privacy = account.197.cid_source_ppi = account.197.session_timer.enable = account.197.session_timer.expires = account.197.session_timer.refresher = account.197.enable_user_equal_phone = account.197.srtp_encryption = account.197.ptime = account.197.shared_line = %BWSHAREDLINE-BINARY-197% account.197.register_mac = account.197.register_line = account.197.reg_fail_retry_interval = account.197.reg_failed_retry_min_time = account.197.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.197.conf_type =
account.197.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-197%
account.197.sip_server_type = account.197.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 910 OF 1142
########################################################################## ############# ##DECT V81 Add
account.197.register_expires_overlap = account.197.subscribe_expires_overlap = account.197.auto_dial_enable = account.197.auto_dial_num = account.197.cp_source = account.197.transfer_refer_to_contact_header.enable = #V80 Add account.197.custom_ua = account.197.callpark_enable = account.197.check_cseq.enable = account.197.check_to_tag.enable = account.197.hold_use_inactive = account.197.line_seize.expires = account.197.update_ack_while_dialing = account.197.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.197.always_fwd.enable =
account.197.always_fwd.target =
account.197.always_fwd.off_code =
account.197.always_fwd.on_code =
account.197.busy_fwd.enable =
account.197.busy_fwd.target =
account.197.busy_fwd.off_code =
account.197.busy_fwd.on_code =
account.197.timeout_fwd.enable =
account.197.timeout_fwd.target =
account.197.timeout_fwd.timeout =
account.197.timeout_fwd.off_code =
account.197.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.197.dnd.enable =
account.197.dnd.on_code =
account.197.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.197.reg.enable =
handset.197.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 911 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.197.xsi.user =%BWLOGIN-ID-197% account.197.xsi.password =%XSIPASSWORD-197% account.197.xsi.host =%XSP_ADDRESS% account.197.xsi.server_type = account.197.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.197.ldap.enable =
handset.197.ldap.name_filter=
handset.197.ldap.number_filter=
handset.197.ldap.host=
handset.197.ldap.port=
handset.197.ldap.base=
handset.197.ldap.user=
handset.197.ldap.password=
handset.197.ldap.max_hits=
handset.197.ldap.name_attr=
handset.197.ldap.numb_attr=
handset.197.ldap.display_name=
handset.197.ldap.version=
handset.197.ldap.call_in_lookup=
handset.197.ldap.ldap_sort=
handset.197.ldap.tls_mode=
handset.197.ldap.call_out_lookup=
handset.197.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account198 Settings
##
##########################################################################
#############
account.198.enable=%BWLINE-BINARY-198% account.198.label=%BWEXTENSION-198% account.198.display_name=%BWCLID-198% account.198.auth_name=%BWAUTHUSER-198% account.198.user_name=%BWLINEPORT-198% account.198.password=%BWAUTHPASSWORD-198%
#W80B ADD account.198.sip_server.template = account.198.media_transmit.enable =
account.198.alarm.template = account.198.alarm.server = account.198.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 912 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.198.sip_server.1.failback_mode =
account.198.sip_server.1.failback_timeout =
account.198.sip_server.1.register_on_enable =
account.198.sip_server.1.failback_subscribe.enable =
account.198.sip_server.1.invite_retry_counts =
account.198.sip_server.1.only_signal_with_registered =
account.198.sip_server.2.failback_mode = account.198.sip_server.2.failback_timeout = account.198.sip_server.2.register_on_enable = account.198.sip_server.2.failback_subscribe.enable = account.198.sip_server.2.invite_retry_counts = account.198.sip_server.2.only_signal_with_registered =
account.198.naptr_build = account.198.fallback.redundancy_type = account.198.fallback.timeout =
account.198.dns_cache_type = account.198.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.198.anonymous_call =
account.198.reject_anonymous_call =
account.198.send_anonymous_code =
account.198.anonymous_call_oncode =
account.198.anonymous_call_offcode =
account.198.send_anonymous_rejection_code =
account.198.anonymous_reject_oncode =
account.198.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.198.codec.g722.enable =
account.198.codec.g722.priority =
account.198.codec.g729.enable = account.198.codec.g729.priority =
account.198.codec.g726_16.enable = account.198.codec.g726_16.priority =
account.198.codec.g726_24.enable = account.198.codec.g726_24.priority =
account.198.codec.g726_32.enable = account.198.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 913 OF 1142
account.198.codec.g726_40.enable = account.198.codec.g726_40.priority =
account.198.codec.ilbc.enable = account.198.codec.ilbc.priority =
account.198.codec.pcmu.enable = account.198.codec.pcmu.priority =
account.198.codec.pcma.enable = account.198.codec.pcma.priority =
account.198.codec.opus.enable = account.198.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.198.nat.nat_traversal = account.198.nat.udp_update_enable = account.198.nat.udp_update_time = account.198.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.198.blf.subscribe_period = account.198.dtmf.type = account.198.dtmf.dtmf_payload = account.198.dtmf.info_type = account.198.100rel_enable = account.198.subscribe_register = account.198.subscribe_mwi = account.198.subscribe_mwi_expires = account.198.subscribe_mwi_to_vm = voice_mail.number.198 = %BWVOICE-PORTAL-NUMBER-198% account.198.display_mwi.enable = account.198.cid_source = account.198.cid_source_privacy = account.198.cid_source_ppi = account.198.session_timer.enable = account.198.session_timer.expires = account.198.session_timer.refresher = account.198.enable_user_equal_phone = account.198.srtp_encryption = account.198.ptime = account.198.shared_line = %BWSHAREDLINE-BINARY-198% account.198.register_mac = account.198.register_line = account.198.reg_fail_retry_interval = account.198.reg_failed_retry_min_time = account.198.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 914 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.198.conf_type =
account.198.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-198%
account.198.sip_server_type = account.198.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.198.register_expires_overlap = account.198.subscribe_expires_overlap = account.198.auto_dial_enable = account.198.auto_dial_num = account.198.cp_source = account.198.transfer_refer_to_contact_header.enable = #V80 Add account.198.custom_ua = account.198.callpark_enable = account.198.check_cseq.enable = account.198.check_to_tag.enable = account.198.hold_use_inactive = account.198.line_seize.expires = account.198.update_ack_while_dialing = account.198.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.198.always_fwd.enable =
account.198.always_fwd.target =
account.198.always_fwd.off_code =
account.198.always_fwd.on_code =
account.198.busy_fwd.enable =
account.198.busy_fwd.target =
account.198.busy_fwd.off_code =
account.198.busy_fwd.on_code =
account.198.timeout_fwd.enable =
account.198.timeout_fwd.target =
account.198.timeout_fwd.timeout =
account.198.timeout_fwd.off_code =
account.198.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 915 OF 1142
account.198.dnd.enable = account.198.dnd.on_code = account.198.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.198.reg.enable =
handset.198.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.198.xsi.user =%BWLOGIN-ID-198% account.198.xsi.password =%XSIPASSWORD-198% account.198.xsi.host =%XSP_ADDRESS% account.198.xsi.server_type = account.198.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.198.ldap.enable =
handset.198.ldap.name_filter=
handset.198.ldap.number_filter=
handset.198.ldap.host=
handset.198.ldap.port=
handset.198.ldap.base=
handset.198.ldap.user=
handset.198.ldap.password=
handset.198.ldap.max_hits=
handset.198.ldap.name_attr=
handset.198.ldap.numb_attr=
handset.198.ldap.display_name=
handset.198.ldap.version=
handset.198.ldap.call_in_lookup=
handset.198.ldap.ldap_sort=
handset.198.ldap.tls_mode=
handset.198.ldap.call_out_lookup=
handset.198.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account199 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 916 OF 1142
account.199.enable=%BWLINE-BINARY-199% account.199.label=%BWEXTENSION-199% account.199.display_name=%BWCLID-199% account.199.auth_name=%BWAUTHUSER-199% account.199.user_name=%BWLINEPORT-199% account.199.password=%BWAUTHPASSWORD-199%
#W80B ADD account.199.sip_server.template = account.199.media_transmit.enable =
account.199.alarm.template = account.199.alarm.server = account.199.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.199.sip_server.1.failback_mode =
account.199.sip_server.1.failback_timeout =
account.199.sip_server.1.register_on_enable =
account.199.sip_server.1.failback_subscribe.enable =
account.199.sip_server.1.invite_retry_counts =
account.199.sip_server.1.only_signal_with_registered =
account.199.sip_server.2.failback_mode = account.199.sip_server.2.failback_timeout = account.199.sip_server.2.register_on_enable = account.199.sip_server.2.failback_subscribe.enable = account.199.sip_server.2.invite_retry_counts = account.199.sip_server.2.only_signal_with_registered =
account.199.naptr_build = account.199.fallback.redundancy_type = account.199.fallback.timeout =
account.199.dns_cache_type = account.199.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.199.anonymous_call =
account.199.reject_anonymous_call =
account.199.send_anonymous_code =
account.199.anonymous_call_oncode =
account.199.anonymous_call_offcode =
account.199.send_anonymous_rejection_code =
account.199.anonymous_reject_oncode =
account.199.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 917 OF 1142
########################################################################## ############# account.199.codec.g722.enable = account.199.codec.g722.priority =
account.199.codec.g729.enable = account.199.codec.g729.priority =
account.199.codec.g726_16.enable = account.199.codec.g726_16.priority =
account.199.codec.g726_24.enable = account.199.codec.g726_24.priority =
account.199.codec.g726_32.enable = account.199.codec.g726_32.priority =
account.199.codec.g726_40.enable = account.199.codec.g726_40.priority =
account.199.codec.ilbc.enable = account.199.codec.ilbc.priority =
account.199.codec.pcmu.enable = account.199.codec.pcmu.priority =
account.199.codec.pcma.enable = account.199.codec.pcma.priority =
account.199.codec.opus.enable = account.199.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.199.nat.nat_traversal = account.199.nat.udp_update_enable = account.199.nat.udp_update_time = account.199.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.199.blf.subscribe_period = account.199.dtmf.type = account.199.dtmf.dtmf_payload = account.199.dtmf.info_type = account.199.100rel_enable = account.199.subscribe_register = account.199.subscribe_mwi = account.199.subscribe_mwi_expires = account.199.subscribe_mwi_to_vm = voice_mail.number.199 = %BWVOICE-PORTAL-NUMBER-199% account.199.display_mwi.enable = account.199.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 918 OF 1142
account.199.cid_source_privacy = account.199.cid_source_ppi = account.199.session_timer.enable = account.199.session_timer.expires = account.199.session_timer.refresher = account.199.enable_user_equal_phone = account.199.srtp_encryption = account.199.ptime = account.199.shared_line = %BWSHAREDLINE-BINARY-199% account.199.register_mac = account.199.register_line = account.199.reg_fail_retry_interval = account.199.reg_failed_retry_min_time = account.199.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.199.conf_type =
account.199.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-199%
account.199.sip_server_type = account.199.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.199.register_expires_overlap = account.199.subscribe_expires_overlap = account.199.auto_dial_enable = account.199.auto_dial_num = account.199.cp_source = account.199.transfer_refer_to_contact_header.enable = #V80 Add account.199.custom_ua = account.199.callpark_enable = account.199.check_cseq.enable = account.199.check_to_tag.enable = account.199.hold_use_inactive = account.199.line_seize.expires = account.199.update_ack_while_dialing = account.199.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.199.always_fwd.enable =
account.199.always_fwd.target =
account.199.always_fwd.off_code =
account.199.always_fwd.on_code =
account.199.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 919 OF 1142
account.199.busy_fwd.target = account.199.busy_fwd.off_code = account.199.busy_fwd.on_code = account.199.timeout_fwd.enable = account.199.timeout_fwd.target = account.199.timeout_fwd.timeout = account.199.timeout_fwd.off_code = account.199.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.199.dnd.enable =
account.199.dnd.on_code =
account.199.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.199.reg.enable =
handset.199.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.199.xsi.user =%BWLOGIN-ID-199% account.199.xsi.password =%XSIPASSWORD-199% account.199.xsi.host =%XSP_ADDRESS% account.199.xsi.server_type = account.199.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.199.ldap.enable =
handset.199.ldap.name_filter=
handset.199.ldap.number_filter=
handset.199.ldap.host=
handset.199.ldap.port=
handset.199.ldap.base=
handset.199.ldap.user=
handset.199.ldap.password=
handset.199.ldap.max_hits=
handset.199.ldap.name_attr=
handset.199.ldap.numb_attr=
handset.199.ldap.display_name=
handset.199.ldap.version=
handset.199.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 920 OF 1142
handset.199.ldap.ldap_sort= handset.199.ldap.tls_mode= handset.199.ldap.call_out_lookup= handset.199.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account200 Settings
##
##########################################################################
#############
account.200.enable=%BWLINE-BINARY-200% account.200.label=%BWEXTENSION-200% account.200.display_name=%BWCLID-200% account.200.auth_name=%BWAUTHUSER-200% account.200.user_name=%BWLINEPORT-200% account.200.password=%BWAUTHPASSWORD-200%
#W80B ADD account.200.sip_server.template = account.200.media_transmit.enable =
account.200.alarm.template = account.200.alarm.server = account.200.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.200.sip_server.1.failback_mode =
account.200.sip_server.1.failback_timeout =
account.200.sip_server.1.register_on_enable =
account.200.sip_server.1.failback_subscribe.enable =
account.200.sip_server.1.invite_retry_counts =
account.200.sip_server.1.only_signal_with_registered =
account.200.sip_server.2.failback_mode = account.200.sip_server.2.failback_timeout = account.200.sip_server.2.register_on_enable = account.200.sip_server.2.failback_subscribe.enable = account.200.sip_server.2.invite_retry_counts = account.200.sip_server.2.only_signal_with_registered =
account.200.naptr_build = account.200.fallback.redundancy_type = account.200.fallback.timeout =
account.200.dns_cache_type = account.200.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 921 OF 1142
account.200.anonymous_call = account.200.reject_anonymous_call = account.200.send_anonymous_code = account.200.anonymous_call_oncode = account.200.anonymous_call_offcode = account.200.send_anonymous_rejection_code = account.200.anonymous_reject_oncode = account.200.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.200.codec.g722.enable =
account.200.codec.g722.priority =
account.200.codec.g729.enable = account.200.codec.g729.priority =
account.200.codec.g726_16.enable = account.200.codec.g726_16.priority =
account.200.codec.g726_24.enable = account.200.codec.g726_24.priority =
account.200.codec.g726_32.enable = account.200.codec.g726_32.priority =
account.200.codec.g726_40.enable = account.200.codec.g726_40.priority =
account.200.codec.ilbc.enable = account.200.codec.ilbc.priority =
account.200.codec.pcmu.enable = account.200.codec.pcmu.priority =
account.200.codec.pcma.enable = account.200.codec.pcma.priority =
account.200.codec.opus.enable = account.200.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.200.nat.nat_traversal = account.200.nat.udp_update_enable = account.200.nat.udp_update_time = account.200.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 922 OF 1142
########################################################################## #############
account.200.blf.subscribe_period = account.200.dtmf.type = account.200.dtmf.dtmf_payload = account.200.dtmf.info_type = account.200.100rel_enable = account.200.subscribe_register = account.200.subscribe_mwi = account.200.subscribe_mwi_expires = account.200.subscribe_mwi_to_vm = voice_mail.number.200 = %BWVOICE-PORTAL-NUMBER-200% account.200.display_mwi.enable = account.200.cid_source = account.200.cid_source_privacy = account.200.cid_source_ppi = account.200.session_timer.enable = account.200.session_timer.expires = account.200.session_timer.refresher = account.200.enable_user_equal_phone = account.200.srtp_encryption = account.200.ptime = account.200.shared_line = %BWSHAREDLINE-BINARY-200% account.200.register_mac = account.200.register_line = account.200.reg_fail_retry_interval = account.200.reg_failed_retry_min_time = account.200.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.200.conf_type =
account.200.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-200%
account.200.sip_server_type = account.200.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.200.register_expires_overlap = account.200.subscribe_expires_overlap = account.200.auto_dial_enable = account.200.auto_dial_num = account.200.cp_source = account.200.transfer_refer_to_contact_header.enable = #V80 Add account.200.custom_ua = account.200.callpark_enable = account.200.check_cseq.enable = account.200.check_to_tag.enable = account.200.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 923 OF 1142
account.200.line_seize.expires = account.200.update_ack_while_dialing = account.200.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.200.always_fwd.enable =
account.200.always_fwd.target =
account.200.always_fwd.off_code =
account.200.always_fwd.on_code =
account.200.busy_fwd.enable =
account.200.busy_fwd.target =
account.200.busy_fwd.off_code =
account.200.busy_fwd.on_code =
account.200.timeout_fwd.enable =
account.200.timeout_fwd.target =
account.200.timeout_fwd.timeout =
account.200.timeout_fwd.off_code =
account.200.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.200.dnd.enable =
account.200.dnd.on_code =
account.200.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.200.reg.enable =
handset.200.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.200.xsi.user =%BWLOGIN-ID-200% account.200.xsi.password =%XSIPASSWORD-200% account.200.xsi.host =%XSP_ADDRESS% account.200.xsi.server_type = account.200.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 924 OF 1142
########################################################################## ############# handset.200.ldap.enable = handset.200.ldap.name_filter= handset.200.ldap.number_filter= handset.200.ldap.host= handset.200.ldap.port= handset.200.ldap.base= handset.200.ldap.user= handset.200.ldap.password= handset.200.ldap.max_hits= handset.200.ldap.name_attr= handset.200.ldap.numb_attr= handset.200.ldap.display_name= handset.200.ldap.version= handset.200.ldap.call_in_lookup= handset.200.ldap.ldap_sort= handset.200.ldap.tls_mode= handset.200.ldap.call_out_lookup= handset.200.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account201 Settings
##
##########################################################################
#############
account.201.enable=%BWLINE-BINARY-201% account.201.label=%BWEXTENSION-201% account.201.display_name=%BWCLID-201% account.201.auth_name=%BWAUTHUSER-201% account.201.user_name=%BWLINEPORT-201% account.201.password=%BWAUTHPASSWORD-201%
#W80B ADD account.201.sip_server.template = account.201.media_transmit.enable =
account.201.alarm.template = account.201.alarm.server = account.201.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.201.sip_server.1.failback_mode =
account.201.sip_server.1.failback_timeout =
account.201.sip_server.1.register_on_enable =
account.201.sip_server.1.failback_subscribe.enable =
account.201.sip_server.1.invite_retry_counts =
account.201.sip_server.1.only_signal_with_registered =
account.201.sip_server.2.failback_mode = account.201.sip_server.2.failback_timeout = account.201.sip_server.2.register_on_enable = account.201.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 925 OF 1142
account.201.sip_server.2.invite_retry_counts = account.201.sip_server.2.only_signal_with_registered =
account.201.naptr_build = account.201.fallback.redundancy_type = account.201.fallback.timeout =
account.201.dns_cache_type = account.201.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.201.anonymous_call =
account.201.reject_anonymous_call =
account.201.send_anonymous_code =
account.201.anonymous_call_oncode =
account.201.anonymous_call_offcode =
account.201.send_anonymous_rejection_code =
account.201.anonymous_reject_oncode =
account.201.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.201.codec.g722.enable =
account.201.codec.g722.priority =
account.201.codec.g729.enable = account.201.codec.g729.priority =
account.201.codec.g726_16.enable = account.201.codec.g726_16.priority =
account.201.codec.g726_24.enable = account.201.codec.g726_24.priority =
account.201.codec.g726_32.enable = account.201.codec.g726_32.priority =
account.201.codec.g726_40.enable = account.201.codec.g726_40.priority =
account.201.codec.ilbc.enable = account.201.codec.ilbc.priority =
account.201.codec.pcmu.enable = account.201.codec.pcmu.priority =
account.201.codec.pcma.enable = account.201.codec.pcma.priority =
account.201.codec.opus.enable = account.201.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 926 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.201.nat.nat_traversal = account.201.nat.udp_update_enable = account.201.nat.udp_update_time = account.201.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.201.blf.subscribe_period = account.201.dtmf.type = account.201.dtmf.dtmf_payload = account.201.dtmf.info_type = account.201.100rel_enable = account.201.subscribe_register = account.201.subscribe_mwi = account.201.subscribe_mwi_expires = account.201.subscribe_mwi_to_vm = voice_mail.number.201 = %BWVOICE-PORTAL-NUMBER-201% account.201.display_mwi.enable = account.201.cid_source = account.201.cid_source_privacy = account.201.cid_source_ppi = account.201.session_timer.enable = account.201.session_timer.expires = account.201.session_timer.refresher = account.201.enable_user_equal_phone = account.201.srtp_encryption = account.201.ptime = account.201.shared_line = %BWSHAREDLINE-BINARY-201% account.201.register_mac = account.201.register_line = account.201.reg_fail_retry_interval = account.201.reg_failed_retry_min_time = account.201.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.201.conf_type =
account.201.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-201%
account.201.sip_server_type = account.201.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 927 OF 1142
########################################################################## ############# ##DECT V81 Add
account.201.register_expires_overlap = account.201.subscribe_expires_overlap = account.201.auto_dial_enable = account.201.auto_dial_num = account.201.cp_source = account.201.transfer_refer_to_contact_header.enable = #V80 Add account.201.custom_ua = account.201.callpark_enable = account.201.check_cseq.enable = account.201.check_to_tag.enable = account.201.hold_use_inactive = account.201.line_seize.expires = account.201.update_ack_while_dialing = account.201.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.201.always_fwd.enable =
account.201.always_fwd.target =
account.201.always_fwd.off_code =
account.201.always_fwd.on_code =
account.201.busy_fwd.enable =
account.201.busy_fwd.target =
account.201.busy_fwd.off_code =
account.201.busy_fwd.on_code =
account.201.timeout_fwd.enable =
account.201.timeout_fwd.target =
account.201.timeout_fwd.timeout =
account.201.timeout_fwd.off_code =
account.201.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.201.dnd.enable =
account.201.dnd.on_code =
account.201.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.201.reg.enable =
handset.201.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 928 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.201.xsi.user =%BWLOGIN-ID-201% account.201.xsi.password =%XSIPASSWORD-201% account.201.xsi.host =%XSP_ADDRESS% account.201.xsi.server_type = account.201.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.201.ldap.enable =
handset.201.ldap.name_filter=
handset.201.ldap.number_filter=
handset.201.ldap.host=
handset.201.ldap.port=
handset.201.ldap.base=
handset.201.ldap.user=
handset.201.ldap.password=
handset.201.ldap.max_hits=
handset.201.ldap.name_attr=
handset.201.ldap.numb_attr=
handset.201.ldap.display_name=
handset.201.ldap.version=
handset.201.ldap.call_in_lookup=
handset.201.ldap.ldap_sort=
handset.201.ldap.tls_mode=
handset.201.ldap.call_out_lookup=
handset.201.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account202 Settings
##
##########################################################################
#############
account.202.enable=%BWLINE-BINARY-202% account.202.label=%BWEXTENSION-202% account.202.display_name=%BWCLID-202% account.202.auth_name=%BWAUTHUSER-202% account.202.user_name=%BWLINEPORT-202% account.202.password=%BWAUTHPASSWORD-202%
#W80B ADD account.202.sip_server.template = account.202.media_transmit.enable =
account.202.alarm.template = account.202.alarm.server = account.202.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 929 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.202.sip_server.1.failback_mode =
account.202.sip_server.1.failback_timeout =
account.202.sip_server.1.register_on_enable =
account.202.sip_server.1.failback_subscribe.enable =
account.202.sip_server.1.invite_retry_counts =
account.202.sip_server.1.only_signal_with_registered =
account.202.sip_server.2.failback_mode = account.202.sip_server.2.failback_timeout = account.202.sip_server.2.register_on_enable = account.202.sip_server.2.failback_subscribe.enable = account.202.sip_server.2.invite_retry_counts = account.202.sip_server.2.only_signal_with_registered =
account.202.naptr_build = account.202.fallback.redundancy_type = account.202.fallback.timeout =
account.202.dns_cache_type = account.202.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.202.anonymous_call =
account.202.reject_anonymous_call =
account.202.send_anonymous_code =
account.202.anonymous_call_oncode =
account.202.anonymous_call_offcode =
account.202.send_anonymous_rejection_code =
account.202.anonymous_reject_oncode =
account.202.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.202.codec.g722.enable =
account.202.codec.g722.priority =
account.202.codec.g729.enable = account.202.codec.g729.priority =
account.202.codec.g726_16.enable = account.202.codec.g726_16.priority =
account.202.codec.g726_24.enable = account.202.codec.g726_24.priority =
account.202.codec.g726_32.enable = account.202.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 930 OF 1142
account.202.codec.g726_40.enable = account.202.codec.g726_40.priority =
account.202.codec.ilbc.enable = account.202.codec.ilbc.priority =
account.202.codec.pcmu.enable = account.202.codec.pcmu.priority =
account.202.codec.pcma.enable = account.202.codec.pcma.priority =
account.202.codec.opus.enable = account.202.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.202.nat.nat_traversal = account.202.nat.udp_update_enable = account.202.nat.udp_update_time = account.202.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.202.blf.subscribe_period = account.202.dtmf.type = account.202.dtmf.dtmf_payload = account.202.dtmf.info_type = account.202.100rel_enable = account.202.subscribe_register = account.202.subscribe_mwi = account.202.subscribe_mwi_expires = account.202.subscribe_mwi_to_vm = voice_mail.number.202 = %BWVOICE-PORTAL-NUMBER-202% account.202.display_mwi.enable = account.202.cid_source = account.202.cid_source_privacy = account.202.cid_source_ppi = account.202.session_timer.enable = account.202.session_timer.expires = account.202.session_timer.refresher = account.202.enable_user_equal_phone = account.202.srtp_encryption = account.202.ptime = account.202.shared_line = %BWSHAREDLINE-BINARY-202% account.202.register_mac = account.202.register_line = account.202.reg_fail_retry_interval = account.202.reg_failed_retry_min_time = account.202.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 931 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.202.conf_type =
account.202.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-202%
account.202.sip_server_type = account.202.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.202.register_expires_overlap = account.202.subscribe_expires_overlap = account.202.auto_dial_enable = account.202.auto_dial_num = account.202.cp_source = account.202.transfer_refer_to_contact_header.enable = #V80 Add account.202.custom_ua = account.202.callpark_enable = account.202.check_cseq.enable = account.202.check_to_tag.enable = account.202.hold_use_inactive = account.202.line_seize.expires = account.202.update_ack_while_dialing = account.202.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.202.always_fwd.enable =
account.202.always_fwd.target =
account.202.always_fwd.off_code =
account.202.always_fwd.on_code =
account.202.busy_fwd.enable =
account.202.busy_fwd.target =
account.202.busy_fwd.off_code =
account.202.busy_fwd.on_code =
account.202.timeout_fwd.enable =
account.202.timeout_fwd.target =
account.202.timeout_fwd.timeout =
account.202.timeout_fwd.off_code =
account.202.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 932 OF 1142
account.202.dnd.enable = account.202.dnd.on_code = account.202.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.202.reg.enable =
handset.202.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.202.xsi.user =%BWLOGIN-ID-202% account.202.xsi.password =%XSIPASSWORD-202% account.202.xsi.host =%XSP_ADDRESS% account.202.xsi.server_type = account.202.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.202.ldap.enable =
handset.202.ldap.name_filter=
handset.202.ldap.number_filter=
handset.202.ldap.host=
handset.202.ldap.port=
handset.202.ldap.base=
handset.202.ldap.user=
handset.202.ldap.password=
handset.202.ldap.max_hits=
handset.202.ldap.name_attr=
handset.202.ldap.numb_attr=
handset.202.ldap.display_name=
handset.202.ldap.version=
handset.202.ldap.call_in_lookup=
handset.202.ldap.ldap_sort=
handset.202.ldap.tls_mode=
handset.202.ldap.call_out_lookup=
handset.202.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account203 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 933 OF 1142
account.203.enable=%BWLINE-BINARY-203% account.203.label=%BWEXTENSION-203% account.203.display_name=%BWCLID-203% account.203.auth_name=%BWAUTHUSER-203% account.203.user_name=%BWLINEPORT-203% account.203.password=%BWAUTHPASSWORD-203%
#W80B ADD account.203.sip_server.template = account.203.media_transmit.enable =
account.203.alarm.template = account.203.alarm.server = account.203.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.203.sip_server.1.failback_mode =
account.203.sip_server.1.failback_timeout =
account.203.sip_server.1.register_on_enable =
account.203.sip_server.1.failback_subscribe.enable =
account.203.sip_server.1.invite_retry_counts =
account.203.sip_server.1.only_signal_with_registered =
account.203.sip_server.2.failback_mode = account.203.sip_server.2.failback_timeout = account.203.sip_server.2.register_on_enable = account.203.sip_server.2.failback_subscribe.enable = account.203.sip_server.2.invite_retry_counts = account.203.sip_server.2.only_signal_with_registered =
account.203.naptr_build = account.203.fallback.redundancy_type = account.203.fallback.timeout =
account.203.dns_cache_type = account.203.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.203.anonymous_call =
account.203.reject_anonymous_call =
account.203.send_anonymous_code =
account.203.anonymous_call_oncode =
account.203.anonymous_call_offcode =
account.203.send_anonymous_rejection_code =
account.203.anonymous_reject_oncode =
account.203.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 934 OF 1142
########################################################################## ############# account.203.codec.g722.enable = account.203.codec.g722.priority =
account.203.codec.g729.enable = account.203.codec.g729.priority =
account.203.codec.g726_16.enable = account.203.codec.g726_16.priority =
account.203.codec.g726_24.enable = account.203.codec.g726_24.priority =
account.203.codec.g726_32.enable = account.203.codec.g726_32.priority =
account.203.codec.g726_40.enable = account.203.codec.g726_40.priority =
account.203.codec.ilbc.enable = account.203.codec.ilbc.priority =
account.203.codec.pcmu.enable = account.203.codec.pcmu.priority =
account.203.codec.pcma.enable = account.203.codec.pcma.priority =
account.203.codec.opus.enable = account.203.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.203.nat.nat_traversal = account.203.nat.udp_update_enable = account.203.nat.udp_update_time = account.203.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.203.blf.subscribe_period = account.203.dtmf.type = account.203.dtmf.dtmf_payload = account.203.dtmf.info_type = account.203.100rel_enable = account.203.subscribe_register = account.203.subscribe_mwi = account.203.subscribe_mwi_expires = account.203.subscribe_mwi_to_vm = voice_mail.number.203 = %BWVOICE-PORTAL-NUMBER-203% account.203.display_mwi.enable = account.203.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 935 OF 1142
account.203.cid_source_privacy = account.203.cid_source_ppi = account.203.session_timer.enable = account.203.session_timer.expires = account.203.session_timer.refresher = account.203.enable_user_equal_phone = account.203.srtp_encryption = account.203.ptime = account.203.shared_line = %BWSHAREDLINE-BINARY-203% account.203.register_mac = account.203.register_line = account.203.reg_fail_retry_interval = account.203.reg_failed_retry_min_time = account.203.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.203.conf_type =
account.203.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-203%
account.203.sip_server_type = account.203.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.203.register_expires_overlap = account.203.subscribe_expires_overlap = account.203.auto_dial_enable = account.203.auto_dial_num = account.203.cp_source = account.203.transfer_refer_to_contact_header.enable = #V80 Add account.203.custom_ua = account.203.callpark_enable = account.203.check_cseq.enable = account.203.check_to_tag.enable = account.203.hold_use_inactive = account.203.line_seize.expires = account.203.update_ack_while_dialing = account.203.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.203.always_fwd.enable =
account.203.always_fwd.target =
account.203.always_fwd.off_code =
account.203.always_fwd.on_code =
account.203.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 936 OF 1142
account.203.busy_fwd.target = account.203.busy_fwd.off_code = account.203.busy_fwd.on_code = account.203.timeout_fwd.enable = account.203.timeout_fwd.target = account.203.timeout_fwd.timeout = account.203.timeout_fwd.off_code = account.203.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.203.dnd.enable =
account.203.dnd.on_code =
account.203.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.203.reg.enable =
handset.203.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.203.xsi.user =%BWLOGIN-ID-203% account.203.xsi.password =%XSIPASSWORD-203% account.203.xsi.host =%XSP_ADDRESS% account.203.xsi.server_type = account.203.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.203.ldap.enable =
handset.203.ldap.name_filter=
handset.203.ldap.number_filter=
handset.203.ldap.host=
handset.203.ldap.port=
handset.203.ldap.base=
handset.203.ldap.user=
handset.203.ldap.password=
handset.203.ldap.max_hits=
handset.203.ldap.name_attr=
handset.203.ldap.numb_attr=
handset.203.ldap.display_name=
handset.203.ldap.version=
handset.203.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 937 OF 1142
handset.203.ldap.ldap_sort= handset.203.ldap.tls_mode= handset.203.ldap.call_out_lookup= handset.203.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account204 Settings
##
##########################################################################
#############
account.204.enable=%BWLINE-BINARY-204% account.204.label=%BWEXTENSION-204% account.204.display_name=%BWCLID-204% account.204.auth_name=%BWAUTHUSER-204% account.204.user_name=%BWLINEPORT-204% account.204.password=%BWAUTHPASSWORD-204%
#W80B ADD account.204.sip_server.template = account.204.media_transmit.enable =
account.204.alarm.template = account.204.alarm.server = account.204.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.204.sip_server.1.failback_mode =
account.204.sip_server.1.failback_timeout =
account.204.sip_server.1.register_on_enable =
account.204.sip_server.1.failback_subscribe.enable =
account.204.sip_server.1.invite_retry_counts =
account.204.sip_server.1.only_signal_with_registered =
account.204.sip_server.2.failback_mode = account.204.sip_server.2.failback_timeout = account.204.sip_server.2.register_on_enable = account.204.sip_server.2.failback_subscribe.enable = account.204.sip_server.2.invite_retry_counts = account.204.sip_server.2.only_signal_with_registered =
account.204.naptr_build = account.204.fallback.redundancy_type = account.204.fallback.timeout =
account.204.dns_cache_type = account.204.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 938 OF 1142
account.204.anonymous_call = account.204.reject_anonymous_call = account.204.send_anonymous_code = account.204.anonymous_call_oncode = account.204.anonymous_call_offcode = account.204.send_anonymous_rejection_code = account.204.anonymous_reject_oncode = account.204.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.204.codec.g722.enable =
account.204.codec.g722.priority =
account.204.codec.g729.enable = account.204.codec.g729.priority =
account.204.codec.g726_16.enable = account.204.codec.g726_16.priority =
account.204.codec.g726_24.enable = account.204.codec.g726_24.priority =
account.204.codec.g726_32.enable = account.204.codec.g726_32.priority =
account.204.codec.g726_40.enable = account.204.codec.g726_40.priority =
account.204.codec.ilbc.enable = account.204.codec.ilbc.priority =
account.204.codec.pcmu.enable = account.204.codec.pcmu.priority =
account.204.codec.pcma.enable = account.204.codec.pcma.priority =
account.204.codec.opus.enable = account.204.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.204.nat.nat_traversal = account.204.nat.udp_update_enable = account.204.nat.udp_update_time = account.204.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 939 OF 1142
########################################################################## #############
account.204.blf.subscribe_period = account.204.dtmf.type = account.204.dtmf.dtmf_payload = account.204.dtmf.info_type = account.204.100rel_enable = account.204.subscribe_register = account.204.subscribe_mwi = account.204.subscribe_mwi_expires = account.204.subscribe_mwi_to_vm = voice_mail.number.204 = %BWVOICE-PORTAL-NUMBER-204% account.204.display_mwi.enable = account.204.cid_source = account.204.cid_source_privacy = account.204.cid_source_ppi = account.204.session_timer.enable = account.204.session_timer.expires = account.204.session_timer.refresher = account.204.enable_user_equal_phone = account.204.srtp_encryption = account.204.ptime = account.204.shared_line = %BWSHAREDLINE-BINARY-204% account.204.register_mac = account.204.register_line = account.204.reg_fail_retry_interval = account.204.reg_failed_retry_min_time = account.204.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.204.conf_type =
account.204.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-204%
account.204.sip_server_type = account.204.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.204.register_expires_overlap = account.204.subscribe_expires_overlap = account.204.auto_dial_enable = account.204.auto_dial_num = account.204.cp_source = account.204.transfer_refer_to_contact_header.enable = #V80 Add account.204.custom_ua = account.204.callpark_enable = account.204.check_cseq.enable = account.204.check_to_tag.enable = account.204.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 940 OF 1142
account.204.line_seize.expires = account.204.update_ack_while_dialing = account.204.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.204.always_fwd.enable =
account.204.always_fwd.target =
account.204.always_fwd.off_code =
account.204.always_fwd.on_code =
account.204.busy_fwd.enable =
account.204.busy_fwd.target =
account.204.busy_fwd.off_code =
account.204.busy_fwd.on_code =
account.204.timeout_fwd.enable =
account.204.timeout_fwd.target =
account.204.timeout_fwd.timeout =
account.204.timeout_fwd.off_code =
account.204.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.204.dnd.enable =
account.204.dnd.on_code =
account.204.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.204.reg.enable =
handset.204.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.204.xsi.user =%BWLOGIN-ID-204% account.204.xsi.password =%XSIPASSWORD-204% account.204.xsi.host =%XSP_ADDRESS% account.204.xsi.server_type = account.204.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 941 OF 1142
########################################################################## ############# handset.204.ldap.enable = handset.204.ldap.name_filter= handset.204.ldap.number_filter= handset.204.ldap.host= handset.204.ldap.port= handset.204.ldap.base= handset.204.ldap.user= handset.204.ldap.password= handset.204.ldap.max_hits= handset.204.ldap.name_attr= handset.204.ldap.numb_attr= handset.204.ldap.display_name= handset.204.ldap.version= handset.204.ldap.call_in_lookup= handset.204.ldap.ldap_sort= handset.204.ldap.tls_mode= handset.204.ldap.call_out_lookup= handset.204.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account205 Settings
##
##########################################################################
#############
account.205.enable=%BWLINE-BINARY-205% account.205.label=%BWEXTENSION-205% account.205.display_name=%BWCLID-205% account.205.auth_name=%BWAUTHUSER-205% account.205.user_name=%BWLINEPORT-205% account.205.password=%BWAUTHPASSWORD-205%
#W80B ADD account.205.sip_server.template = account.205.media_transmit.enable =
account.205.alarm.template = account.205.alarm.server = account.205.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.205.sip_server.1.failback_mode =
account.205.sip_server.1.failback_timeout =
account.205.sip_server.1.register_on_enable =
account.205.sip_server.1.failback_subscribe.enable =
account.205.sip_server.1.invite_retry_counts =
account.205.sip_server.1.only_signal_with_registered =
account.205.sip_server.2.failback_mode = account.205.sip_server.2.failback_timeout = account.205.sip_server.2.register_on_enable = account.205.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 942 OF 1142
account.205.sip_server.2.invite_retry_counts = account.205.sip_server.2.only_signal_with_registered =
account.205.naptr_build = account.205.fallback.redundancy_type = account.205.fallback.timeout =
account.205.dns_cache_type = account.205.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.205.anonymous_call =
account.205.reject_anonymous_call =
account.205.send_anonymous_code =
account.205.anonymous_call_oncode =
account.205.anonymous_call_offcode =
account.205.send_anonymous_rejection_code =
account.205.anonymous_reject_oncode =
account.205.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.205.codec.g722.enable =
account.205.codec.g722.priority =
account.205.codec.g729.enable = account.205.codec.g729.priority =
account.205.codec.g726_16.enable = account.205.codec.g726_16.priority =
account.205.codec.g726_24.enable = account.205.codec.g726_24.priority =
account.205.codec.g726_32.enable = account.205.codec.g726_32.priority =
account.205.codec.g726_40.enable = account.205.codec.g726_40.priority =
account.205.codec.ilbc.enable = account.205.codec.ilbc.priority =
account.205.codec.pcmu.enable = account.205.codec.pcmu.priority =
account.205.codec.pcma.enable = account.205.codec.pcma.priority =
account.205.codec.opus.enable = account.205.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 943 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.205.nat.nat_traversal = account.205.nat.udp_update_enable = account.205.nat.udp_update_time = account.205.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.205.blf.subscribe_period = account.205.dtmf.type = account.205.dtmf.dtmf_payload = account.205.dtmf.info_type = account.205.100rel_enable = account.205.subscribe_register = account.205.subscribe_mwi = account.205.subscribe_mwi_expires = account.205.subscribe_mwi_to_vm = voice_mail.number.205 = %BWVOICE-PORTAL-NUMBER-205% account.205.display_mwi.enable = account.205.cid_source = account.205.cid_source_privacy = account.205.cid_source_ppi = account.205.session_timer.enable = account.205.session_timer.expires = account.205.session_timer.refresher = account.205.enable_user_equal_phone = account.205.srtp_encryption = account.205.ptime = account.205.shared_line = %BWSHAREDLINE-BINARY-205% account.205.register_mac = account.205.register_line = account.205.reg_fail_retry_interval = account.205.reg_failed_retry_min_time = account.205.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.205.conf_type =
account.205.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-205%
account.205.sip_server_type = account.205.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 944 OF 1142
########################################################################## ############# ##DECT V81 Add
account.205.register_expires_overlap = account.205.subscribe_expires_overlap = account.205.auto_dial_enable = account.205.auto_dial_num = account.205.cp_source = account.205.transfer_refer_to_contact_header.enable = #V80 Add account.205.custom_ua = account.205.callpark_enable = account.205.check_cseq.enable = account.205.check_to_tag.enable = account.205.hold_use_inactive = account.205.line_seize.expires = account.205.update_ack_while_dialing = account.205.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.205.always_fwd.enable =
account.205.always_fwd.target =
account.205.always_fwd.off_code =
account.205.always_fwd.on_code =
account.205.busy_fwd.enable =
account.205.busy_fwd.target =
account.205.busy_fwd.off_code =
account.205.busy_fwd.on_code =
account.205.timeout_fwd.enable =
account.205.timeout_fwd.target =
account.205.timeout_fwd.timeout =
account.205.timeout_fwd.off_code =
account.205.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.205.dnd.enable =
account.205.dnd.on_code =
account.205.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.205.reg.enable =
handset.205.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 945 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.205.xsi.user =%BWLOGIN-ID-205% account.205.xsi.password =%XSIPASSWORD-205% account.205.xsi.host =%XSP_ADDRESS% account.205.xsi.server_type = account.205.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.205.ldap.enable =
handset.205.ldap.name_filter=
handset.205.ldap.number_filter=
handset.205.ldap.host=
handset.205.ldap.port=
handset.205.ldap.base=
handset.205.ldap.user=
handset.205.ldap.password=
handset.205.ldap.max_hits=
handset.205.ldap.name_attr=
handset.205.ldap.numb_attr=
handset.205.ldap.display_name=
handset.205.ldap.version=
handset.205.ldap.call_in_lookup=
handset.205.ldap.ldap_sort=
handset.205.ldap.tls_mode=
handset.205.ldap.call_out_lookup=
handset.205.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account206 Settings
##
##########################################################################
#############
account.206.enable=%BWLINE-BINARY-206% account.206.label=%BWEXTENSION-206% account.206.display_name=%BWCLID-206% account.206.auth_name=%BWAUTHUSER-206% account.206.user_name=%BWLINEPORT-206% account.206.password=%BWAUTHPASSWORD-206%
#W80B ADD account.206.sip_server.template = account.206.media_transmit.enable =
account.206.alarm.template = account.206.alarm.server = account.206.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 946 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.206.sip_server.1.failback_mode =
account.206.sip_server.1.failback_timeout =
account.206.sip_server.1.register_on_enable =
account.206.sip_server.1.failback_subscribe.enable =
account.206.sip_server.1.invite_retry_counts =
account.206.sip_server.1.only_signal_with_registered =
account.206.sip_server.2.failback_mode = account.206.sip_server.2.failback_timeout = account.206.sip_server.2.register_on_enable = account.206.sip_server.2.failback_subscribe.enable = account.206.sip_server.2.invite_retry_counts = account.206.sip_server.2.only_signal_with_registered =
account.206.naptr_build = account.206.fallback.redundancy_type = account.206.fallback.timeout =
account.206.dns_cache_type = account.206.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.206.anonymous_call =
account.206.reject_anonymous_call =
account.206.send_anonymous_code =
account.206.anonymous_call_oncode =
account.206.anonymous_call_offcode =
account.206.send_anonymous_rejection_code =
account.206.anonymous_reject_oncode =
account.206.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.206.codec.g722.enable =
account.206.codec.g722.priority =
account.206.codec.g729.enable = account.206.codec.g729.priority =
account.206.codec.g726_16.enable = account.206.codec.g726_16.priority =
account.206.codec.g726_24.enable = account.206.codec.g726_24.priority =
account.206.codec.g726_32.enable = account.206.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 947 OF 1142
account.206.codec.g726_40.enable = account.206.codec.g726_40.priority =
account.206.codec.ilbc.enable = account.206.codec.ilbc.priority =
account.206.codec.pcmu.enable = account.206.codec.pcmu.priority =
account.206.codec.pcma.enable = account.206.codec.pcma.priority =
account.206.codec.opus.enable = account.206.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.206.nat.nat_traversal = account.206.nat.udp_update_enable = account.206.nat.udp_update_time = account.206.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.206.blf.subscribe_period = account.206.dtmf.type = account.206.dtmf.dtmf_payload = account.206.dtmf.info_type = account.206.100rel_enable = account.206.subscribe_register = account.206.subscribe_mwi = account.206.subscribe_mwi_expires = account.206.subscribe_mwi_to_vm = voice_mail.number.206 = %BWVOICE-PORTAL-NUMBER-206% account.206.display_mwi.enable = account.206.cid_source = account.206.cid_source_privacy = account.206.cid_source_ppi = account.206.session_timer.enable = account.206.session_timer.expires = account.206.session_timer.refresher = account.206.enable_user_equal_phone = account.206.srtp_encryption = account.206.ptime = account.206.shared_line = %BWSHAREDLINE-BINARY-206% account.206.register_mac = account.206.register_line = account.206.reg_fail_retry_interval = account.206.reg_failed_retry_min_time = account.206.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 948 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.206.conf_type =
account.206.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-206%
account.206.sip_server_type = account.206.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.206.register_expires_overlap = account.206.subscribe_expires_overlap = account.206.auto_dial_enable = account.206.auto_dial_num = account.206.cp_source = account.206.transfer_refer_to_contact_header.enable = #V80 Add account.206.custom_ua = account.206.callpark_enable = account.206.check_cseq.enable = account.206.check_to_tag.enable = account.206.hold_use_inactive = account.206.line_seize.expires = account.206.update_ack_while_dialing = account.206.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.206.always_fwd.enable =
account.206.always_fwd.target =
account.206.always_fwd.off_code =
account.206.always_fwd.on_code =
account.206.busy_fwd.enable =
account.206.busy_fwd.target =
account.206.busy_fwd.off_code =
account.206.busy_fwd.on_code =
account.206.timeout_fwd.enable =
account.206.timeout_fwd.target =
account.206.timeout_fwd.timeout =
account.206.timeout_fwd.off_code =
account.206.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 949 OF 1142
account.206.dnd.enable = account.206.dnd.on_code = account.206.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.206.reg.enable =
handset.206.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.206.xsi.user =%BWLOGIN-ID-206% account.206.xsi.password =%XSIPASSWORD-206% account.206.xsi.host =%XSP_ADDRESS% account.206.xsi.server_type = account.206.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.206.ldap.enable =
handset.206.ldap.name_filter=
handset.206.ldap.number_filter=
handset.206.ldap.host=
handset.206.ldap.port=
handset.206.ldap.base=
handset.206.ldap.user=
handset.206.ldap.password=
handset.206.ldap.max_hits=
handset.206.ldap.name_attr=
handset.206.ldap.numb_attr=
handset.206.ldap.display_name=
handset.206.ldap.version=
handset.206.ldap.call_in_lookup=
handset.206.ldap.ldap_sort=
handset.206.ldap.tls_mode=
handset.206.ldap.call_out_lookup=
handset.206.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account207 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 950 OF 1142
account.207.enable=%BWLINE-BINARY-207% account.207.label=%BWEXTENSION-207% account.207.display_name=%BWCLID-207% account.207.auth_name=%BWAUTHUSER-207% account.207.user_name=%BWLINEPORT-207% account.207.password=%BWAUTHPASSWORD-207%
#W80B ADD account.207.sip_server.template = account.207.media_transmit.enable =
account.207.alarm.template = account.207.alarm.server = account.207.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.207.sip_server.1.failback_mode =
account.207.sip_server.1.failback_timeout =
account.207.sip_server.1.register_on_enable =
account.207.sip_server.1.failback_subscribe.enable =
account.207.sip_server.1.invite_retry_counts =
account.207.sip_server.1.only_signal_with_registered =
account.207.sip_server.2.failback_mode = account.207.sip_server.2.failback_timeout = account.207.sip_server.2.register_on_enable = account.207.sip_server.2.failback_subscribe.enable = account.207.sip_server.2.invite_retry_counts = account.207.sip_server.2.only_signal_with_registered =
account.207.naptr_build = account.207.fallback.redundancy_type = account.207.fallback.timeout =
account.207.dns_cache_type = account.207.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.207.anonymous_call =
account.207.reject_anonymous_call =
account.207.send_anonymous_code =
account.207.anonymous_call_oncode =
account.207.anonymous_call_offcode =
account.207.send_anonymous_rejection_code =
account.207.anonymous_reject_oncode =
account.207.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 951 OF 1142
########################################################################## ############# account.207.codec.g722.enable = account.207.codec.g722.priority =
account.207.codec.g729.enable = account.207.codec.g729.priority =
account.207.codec.g726_16.enable = account.207.codec.g726_16.priority =
account.207.codec.g726_24.enable = account.207.codec.g726_24.priority =
account.207.codec.g726_32.enable = account.207.codec.g726_32.priority =
account.207.codec.g726_40.enable = account.207.codec.g726_40.priority =
account.207.codec.ilbc.enable = account.207.codec.ilbc.priority =
account.207.codec.pcmu.enable = account.207.codec.pcmu.priority =
account.207.codec.pcma.enable = account.207.codec.pcma.priority =
account.207.codec.opus.enable = account.207.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.207.nat.nat_traversal = account.207.nat.udp_update_enable = account.207.nat.udp_update_time = account.207.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.207.blf.subscribe_period = account.207.dtmf.type = account.207.dtmf.dtmf_payload = account.207.dtmf.info_type = account.207.100rel_enable = account.207.subscribe_register = account.207.subscribe_mwi = account.207.subscribe_mwi_expires = account.207.subscribe_mwi_to_vm = voice_mail.number.207 = %BWVOICE-PORTAL-NUMBER-207% account.207.display_mwi.enable = account.207.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 952 OF 1142
account.207.cid_source_privacy = account.207.cid_source_ppi = account.207.session_timer.enable = account.207.session_timer.expires = account.207.session_timer.refresher = account.207.enable_user_equal_phone = account.207.srtp_encryption = account.207.ptime = account.207.shared_line = %BWSHAREDLINE-BINARY-207% account.207.register_mac = account.207.register_line = account.207.reg_fail_retry_interval = account.207.reg_failed_retry_min_time = account.207.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.207.conf_type =
account.207.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-207%
account.207.sip_server_type = account.207.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.207.register_expires_overlap = account.207.subscribe_expires_overlap = account.207.auto_dial_enable = account.207.auto_dial_num = account.207.cp_source = account.207.transfer_refer_to_contact_header.enable = #V80 Add account.207.custom_ua = account.207.callpark_enable = account.207.check_cseq.enable = account.207.check_to_tag.enable = account.207.hold_use_inactive = account.207.line_seize.expires = account.207.update_ack_while_dialing = account.207.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.207.always_fwd.enable =
account.207.always_fwd.target =
account.207.always_fwd.off_code =
account.207.always_fwd.on_code =
account.207.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 953 OF 1142
account.207.busy_fwd.target = account.207.busy_fwd.off_code = account.207.busy_fwd.on_code = account.207.timeout_fwd.enable = account.207.timeout_fwd.target = account.207.timeout_fwd.timeout = account.207.timeout_fwd.off_code = account.207.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.207.dnd.enable =
account.207.dnd.on_code =
account.207.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.207.reg.enable =
handset.207.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.207.xsi.user =%BWLOGIN-ID-207% account.207.xsi.password =%XSIPASSWORD-207% account.207.xsi.host =%XSP_ADDRESS% account.207.xsi.server_type = account.207.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.207.ldap.enable =
handset.207.ldap.name_filter=
handset.207.ldap.number_filter=
handset.207.ldap.host=
handset.207.ldap.port=
handset.207.ldap.base=
handset.207.ldap.user=
handset.207.ldap.password=
handset.207.ldap.max_hits=
handset.207.ldap.name_attr=
handset.207.ldap.numb_attr=
handset.207.ldap.display_name=
handset.207.ldap.version=
handset.207.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 954 OF 1142
handset.207.ldap.ldap_sort= handset.207.ldap.tls_mode= handset.207.ldap.call_out_lookup= handset.207.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account208 Settings
##
##########################################################################
#############
account.208.enable=%BWLINE-BINARY-208% account.208.label=%BWEXTENSION-208% account.208.display_name=%BWCLID-208% account.208.auth_name=%BWAUTHUSER-208% account.208.user_name=%BWLINEPORT-208% account.208.password=%BWAUTHPASSWORD-208%
#W80B ADD account.208.sip_server.template = account.208.media_transmit.enable =
account.208.alarm.template = account.208.alarm.server = account.208.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.208.sip_server.1.failback_mode =
account.208.sip_server.1.failback_timeout =
account.208.sip_server.1.register_on_enable =
account.208.sip_server.1.failback_subscribe.enable =
account.208.sip_server.1.invite_retry_counts =
account.208.sip_server.1.only_signal_with_registered =
account.208.sip_server.2.failback_mode = account.208.sip_server.2.failback_timeout = account.208.sip_server.2.register_on_enable = account.208.sip_server.2.failback_subscribe.enable = account.208.sip_server.2.invite_retry_counts = account.208.sip_server.2.only_signal_with_registered =
account.208.naptr_build = account.208.fallback.redundancy_type = account.208.fallback.timeout =
account.208.dns_cache_type = account.208.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 955 OF 1142
account.208.anonymous_call = account.208.reject_anonymous_call = account.208.send_anonymous_code = account.208.anonymous_call_oncode = account.208.anonymous_call_offcode = account.208.send_anonymous_rejection_code = account.208.anonymous_reject_oncode = account.208.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.208.codec.g722.enable =
account.208.codec.g722.priority =
account.208.codec.g729.enable = account.208.codec.g729.priority =
account.208.codec.g726_16.enable = account.208.codec.g726_16.priority =
account.208.codec.g726_24.enable = account.208.codec.g726_24.priority =
account.208.codec.g726_32.enable = account.208.codec.g726_32.priority =
account.208.codec.g726_40.enable = account.208.codec.g726_40.priority =
account.208.codec.ilbc.enable = account.208.codec.ilbc.priority =
account.208.codec.pcmu.enable = account.208.codec.pcmu.priority =
account.208.codec.pcma.enable = account.208.codec.pcma.priority =
account.208.codec.opus.enable = account.208.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.208.nat.nat_traversal = account.208.nat.udp_update_enable = account.208.nat.udp_update_time = account.208.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 956 OF 1142
########################################################################## #############
account.208.blf.subscribe_period = account.208.dtmf.type = account.208.dtmf.dtmf_payload = account.208.dtmf.info_type = account.208.100rel_enable = account.208.subscribe_register = account.208.subscribe_mwi = account.208.subscribe_mwi_expires = account.208.subscribe_mwi_to_vm = voice_mail.number.208 = %BWVOICE-PORTAL-NUMBER-208% account.208.display_mwi.enable = account.208.cid_source = account.208.cid_source_privacy = account.208.cid_source_ppi = account.208.session_timer.enable = account.208.session_timer.expires = account.208.session_timer.refresher = account.208.enable_user_equal_phone = account.208.srtp_encryption = account.208.ptime = account.208.shared_line = %BWSHAREDLINE-BINARY-208% account.208.register_mac = account.208.register_line = account.208.reg_fail_retry_interval = account.208.reg_failed_retry_min_time = account.208.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.208.conf_type =
account.208.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-208%
account.208.sip_server_type = account.208.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.208.register_expires_overlap = account.208.subscribe_expires_overlap = account.208.auto_dial_enable = account.208.auto_dial_num = account.208.cp_source = account.208.transfer_refer_to_contact_header.enable = #V80 Add account.208.custom_ua = account.208.callpark_enable = account.208.check_cseq.enable = account.208.check_to_tag.enable = account.208.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 957 OF 1142
account.208.line_seize.expires = account.208.update_ack_while_dialing = account.208.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.208.always_fwd.enable =
account.208.always_fwd.target =
account.208.always_fwd.off_code =
account.208.always_fwd.on_code =
account.208.busy_fwd.enable =
account.208.busy_fwd.target =
account.208.busy_fwd.off_code =
account.208.busy_fwd.on_code =
account.208.timeout_fwd.enable =
account.208.timeout_fwd.target =
account.208.timeout_fwd.timeout =
account.208.timeout_fwd.off_code =
account.208.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.208.dnd.enable =
account.208.dnd.on_code =
account.208.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.208.reg.enable =
handset.208.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.208.xsi.user =%BWLOGIN-ID-208% account.208.xsi.password =%XSIPASSWORD-208% account.208.xsi.host =%XSP_ADDRESS% account.208.xsi.server_type = account.208.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 958 OF 1142
########################################################################## ############# handset.208.ldap.enable = handset.208.ldap.name_filter= handset.208.ldap.number_filter= handset.208.ldap.host= handset.208.ldap.port= handset.208.ldap.base= handset.208.ldap.user= handset.208.ldap.password= handset.208.ldap.max_hits= handset.208.ldap.name_attr= handset.208.ldap.numb_attr= handset.208.ldap.display_name= handset.208.ldap.version= handset.208.ldap.call_in_lookup= handset.208.ldap.ldap_sort= handset.208.ldap.tls_mode= handset.208.ldap.call_out_lookup= handset.208.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account209 Settings
##
##########################################################################
#############
account.209.enable=%BWLINE-BINARY-209% account.209.label=%BWEXTENSION-209% account.209.display_name=%BWCLID-209% account.209.auth_name=%BWAUTHUSER-209% account.209.user_name=%BWLINEPORT-209% account.209.password=%BWAUTHPASSWORD-209%
#W80B ADD account.209.sip_server.template = account.209.media_transmit.enable =
account.209.alarm.template = account.209.alarm.server = account.209.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.209.sip_server.1.failback_mode =
account.209.sip_server.1.failback_timeout =
account.209.sip_server.1.register_on_enable =
account.209.sip_server.1.failback_subscribe.enable =
account.209.sip_server.1.invite_retry_counts =
account.209.sip_server.1.only_signal_with_registered =
account.209.sip_server.2.failback_mode = account.209.sip_server.2.failback_timeout = account.209.sip_server.2.register_on_enable = account.209.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 959 OF 1142
account.209.sip_server.2.invite_retry_counts = account.209.sip_server.2.only_signal_with_registered =
account.209.naptr_build = account.209.fallback.redundancy_type = account.209.fallback.timeout =
account.209.dns_cache_type = account.209.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.209.anonymous_call =
account.209.reject_anonymous_call =
account.209.send_anonymous_code =
account.209.anonymous_call_oncode =
account.209.anonymous_call_offcode =
account.209.send_anonymous_rejection_code =
account.209.anonymous_reject_oncode =
account.209.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.209.codec.g722.enable =
account.209.codec.g722.priority =
account.209.codec.g729.enable = account.209.codec.g729.priority =
account.209.codec.g726_16.enable = account.209.codec.g726_16.priority =
account.209.codec.g726_24.enable = account.209.codec.g726_24.priority =
account.209.codec.g726_32.enable = account.209.codec.g726_32.priority =
account.209.codec.g726_40.enable = account.209.codec.g726_40.priority =
account.209.codec.ilbc.enable = account.209.codec.ilbc.priority =
account.209.codec.pcmu.enable = account.209.codec.pcmu.priority =
account.209.codec.pcma.enable = account.209.codec.pcma.priority =
account.209.codec.opus.enable = account.209.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 960 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.209.nat.nat_traversal = account.209.nat.udp_update_enable = account.209.nat.udp_update_time = account.209.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.209.blf.subscribe_period = account.209.dtmf.type = account.209.dtmf.dtmf_payload = account.209.dtmf.info_type = account.209.100rel_enable = account.209.subscribe_register = account.209.subscribe_mwi = account.209.subscribe_mwi_expires = account.209.subscribe_mwi_to_vm = voice_mail.number.209 = %BWVOICE-PORTAL-NUMBER-209% account.209.display_mwi.enable = account.209.cid_source = account.209.cid_source_privacy = account.209.cid_source_ppi = account.209.session_timer.enable = account.209.session_timer.expires = account.209.session_timer.refresher = account.209.enable_user_equal_phone = account.209.srtp_encryption = account.209.ptime = account.209.shared_line = %BWSHAREDLINE-BINARY-209% account.209.register_mac = account.209.register_line = account.209.reg_fail_retry_interval = account.209.reg_failed_retry_min_time = account.209.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.209.conf_type =
account.209.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-209%
account.209.sip_server_type = account.209.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 961 OF 1142
########################################################################## ############# ##DECT V81 Add
account.209.register_expires_overlap = account.209.subscribe_expires_overlap = account.209.auto_dial_enable = account.209.auto_dial_num = account.209.cp_source = account.209.transfer_refer_to_contact_header.enable = #V80 Add account.209.custom_ua = account.209.callpark_enable = account.209.check_cseq.enable = account.209.check_to_tag.enable = account.209.hold_use_inactive = account.209.line_seize.expires = account.209.update_ack_while_dialing = account.209.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.209.always_fwd.enable =
account.209.always_fwd.target =
account.209.always_fwd.off_code =
account.209.always_fwd.on_code =
account.209.busy_fwd.enable =
account.209.busy_fwd.target =
account.209.busy_fwd.off_code =
account.209.busy_fwd.on_code =
account.209.timeout_fwd.enable =
account.209.timeout_fwd.target =
account.209.timeout_fwd.timeout =
account.209.timeout_fwd.off_code =
account.209.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.209.dnd.enable =
account.209.dnd.on_code =
account.209.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.209.reg.enable =
handset.209.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 962 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.209.xsi.user =%BWLOGIN-ID-209% account.209.xsi.password =%XSIPASSWORD-209% account.209.xsi.host =%XSP_ADDRESS% account.209.xsi.server_type = account.209.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.209.ldap.enable =
handset.209.ldap.name_filter=
handset.209.ldap.number_filter=
handset.209.ldap.host=
handset.209.ldap.port=
handset.209.ldap.base=
handset.209.ldap.user=
handset.209.ldap.password=
handset.209.ldap.max_hits=
handset.209.ldap.name_attr=
handset.209.ldap.numb_attr=
handset.209.ldap.display_name=
handset.209.ldap.version=
handset.209.ldap.call_in_lookup=
handset.209.ldap.ldap_sort=
handset.209.ldap.tls_mode=
handset.209.ldap.call_out_lookup=
handset.209.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account210 Settings
##
##########################################################################
#############
account.210.enable=%BWLINE-BINARY-210% account.210.label=%BWEXTENSION-210% account.210.display_name=%BWCLID-210% account.210.auth_name=%BWAUTHUSER-210% account.210.user_name=%BWLINEPORT-210% account.210.password=%BWAUTHPASSWORD-210%
#W80B ADD account.210.sip_server.template = account.210.media_transmit.enable =
account.210.alarm.template = account.210.alarm.server = account.210.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 963 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.210.sip_server.1.failback_mode =
account.210.sip_server.1.failback_timeout =
account.210.sip_server.1.register_on_enable =
account.210.sip_server.1.failback_subscribe.enable =
account.210.sip_server.1.invite_retry_counts =
account.210.sip_server.1.only_signal_with_registered =
account.210.sip_server.2.failback_mode = account.210.sip_server.2.failback_timeout = account.210.sip_server.2.register_on_enable = account.210.sip_server.2.failback_subscribe.enable = account.210.sip_server.2.invite_retry_counts = account.210.sip_server.2.only_signal_with_registered =
account.210.naptr_build = account.210.fallback.redundancy_type = account.210.fallback.timeout =
account.210.dns_cache_type = account.210.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.210.anonymous_call =
account.210.reject_anonymous_call =
account.210.send_anonymous_code =
account.210.anonymous_call_oncode =
account.210.anonymous_call_offcode =
account.210.send_anonymous_rejection_code =
account.210.anonymous_reject_oncode =
account.210.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.210.codec.g722.enable =
account.210.codec.g722.priority =
account.210.codec.g729.enable = account.210.codec.g729.priority =
account.210.codec.g726_16.enable = account.210.codec.g726_16.priority =
account.210.codec.g726_24.enable = account.210.codec.g726_24.priority =
account.210.codec.g726_32.enable = account.210.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 964 OF 1142
account.210.codec.g726_40.enable = account.210.codec.g726_40.priority =
account.210.codec.ilbc.enable = account.210.codec.ilbc.priority =
account.210.codec.pcmu.enable = account.210.codec.pcmu.priority =
account.210.codec.pcma.enable = account.210.codec.pcma.priority =
account.210.codec.opus.enable = account.210.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.210.nat.nat_traversal = account.210.nat.udp_update_enable = account.210.nat.udp_update_time = account.210.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.210.blf.subscribe_period = account.210.dtmf.type = account.210.dtmf.dtmf_payload = account.210.dtmf.info_type = account.210.100rel_enable = account.210.subscribe_register = account.210.subscribe_mwi = account.210.subscribe_mwi_expires = account.210.subscribe_mwi_to_vm = voice_mail.number.210 = %BWVOICE-PORTAL-NUMBER-210% account.210.display_mwi.enable = account.210.cid_source = account.210.cid_source_privacy = account.210.cid_source_ppi = account.210.session_timer.enable = account.210.session_timer.expires = account.210.session_timer.refresher = account.210.enable_user_equal_phone = account.210.srtp_encryption = account.210.ptime = account.210.shared_line = %BWSHAREDLINE-BINARY-210% account.210.register_mac = account.210.register_line = account.210.reg_fail_retry_interval = account.210.reg_failed_retry_min_time = account.210.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 965 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.210.conf_type =
account.210.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-210%
account.210.sip_server_type = account.210.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.210.register_expires_overlap = account.210.subscribe_expires_overlap = account.210.auto_dial_enable = account.210.auto_dial_num = account.210.cp_source = account.210.transfer_refer_to_contact_header.enable = #V80 Add account.210.custom_ua = account.210.callpark_enable = account.210.check_cseq.enable = account.210.check_to_tag.enable = account.210.hold_use_inactive = account.210.line_seize.expires = account.210.update_ack_while_dialing = account.210.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.210.always_fwd.enable =
account.210.always_fwd.target =
account.210.always_fwd.off_code =
account.210.always_fwd.on_code =
account.210.busy_fwd.enable =
account.210.busy_fwd.target =
account.210.busy_fwd.off_code =
account.210.busy_fwd.on_code =
account.210.timeout_fwd.enable =
account.210.timeout_fwd.target =
account.210.timeout_fwd.timeout =
account.210.timeout_fwd.off_code =
account.210.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 966 OF 1142
account.210.dnd.enable = account.210.dnd.on_code = account.210.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.210.reg.enable =
handset.210.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.210.xsi.user =%BWLOGIN-ID-210% account.210.xsi.password =%XSIPASSWORD-210% account.210.xsi.host =%XSP_ADDRESS% account.210.xsi.server_type = account.210.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.210.ldap.enable =
handset.210.ldap.name_filter=
handset.210.ldap.number_filter=
handset.210.ldap.host=
handset.210.ldap.port=
handset.210.ldap.base=
handset.210.ldap.user=
handset.210.ldap.password=
handset.210.ldap.max_hits=
handset.210.ldap.name_attr=
handset.210.ldap.numb_attr=
handset.210.ldap.display_name=
handset.210.ldap.version=
handset.210.ldap.call_in_lookup=
handset.210.ldap.ldap_sort=
handset.210.ldap.tls_mode=
handset.210.ldap.call_out_lookup=
handset.210.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account211 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 967 OF 1142
account.211.enable=%BWLINE-BINARY-211% account.211.label=%BWEXTENSION-211% account.211.display_name=%BWCLID-211% account.211.auth_name=%BWAUTHUSER-211% account.211.user_name=%BWLINEPORT-211% account.211.password=%BWAUTHPASSWORD-211%
#W80B ADD account.211.sip_server.template = account.211.media_transmit.enable =
account.211.alarm.template = account.211.alarm.server = account.211.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.211.sip_server.1.failback_mode =
account.211.sip_server.1.failback_timeout =
account.211.sip_server.1.register_on_enable =
account.211.sip_server.1.failback_subscribe.enable =
account.211.sip_server.1.invite_retry_counts =
account.211.sip_server.1.only_signal_with_registered =
account.211.sip_server.2.failback_mode = account.211.sip_server.2.failback_timeout = account.211.sip_server.2.register_on_enable = account.211.sip_server.2.failback_subscribe.enable = account.211.sip_server.2.invite_retry_counts = account.211.sip_server.2.only_signal_with_registered =
account.211.naptr_build = account.211.fallback.redundancy_type = account.211.fallback.timeout =
account.211.dns_cache_type = account.211.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.211.anonymous_call =
account.211.reject_anonymous_call =
account.211.send_anonymous_code =
account.211.anonymous_call_oncode =
account.211.anonymous_call_offcode =
account.211.send_anonymous_rejection_code =
account.211.anonymous_reject_oncode =
account.211.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 968 OF 1142
########################################################################## ############# account.211.codec.g722.enable = account.211.codec.g722.priority =
account.211.codec.g729.enable = account.211.codec.g729.priority =
account.211.codec.g726_16.enable = account.211.codec.g726_16.priority =
account.211.codec.g726_24.enable = account.211.codec.g726_24.priority =
account.211.codec.g726_32.enable = account.211.codec.g726_32.priority =
account.211.codec.g726_40.enable = account.211.codec.g726_40.priority =
account.211.codec.ilbc.enable = account.211.codec.ilbc.priority =
account.211.codec.pcmu.enable = account.211.codec.pcmu.priority =
account.211.codec.pcma.enable = account.211.codec.pcma.priority =
account.211.codec.opus.enable = account.211.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.211.nat.nat_traversal = account.211.nat.udp_update_enable = account.211.nat.udp_update_time = account.211.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.211.blf.subscribe_period = account.211.dtmf.type = account.211.dtmf.dtmf_payload = account.211.dtmf.info_type = account.211.100rel_enable = account.211.subscribe_register = account.211.subscribe_mwi = account.211.subscribe_mwi_expires = account.211.subscribe_mwi_to_vm = voice_mail.number.211 = %BWVOICE-PORTAL-NUMBER-211% account.211.display_mwi.enable = account.211.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 969 OF 1142
account.211.cid_source_privacy = account.211.cid_source_ppi = account.211.session_timer.enable = account.211.session_timer.expires = account.211.session_timer.refresher = account.211.enable_user_equal_phone = account.211.srtp_encryption = account.211.ptime = account.211.shared_line = %BWSHAREDLINE-BINARY-211% account.211.register_mac = account.211.register_line = account.211.reg_fail_retry_interval = account.211.reg_failed_retry_min_time = account.211.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.211.conf_type =
account.211.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-211%
account.211.sip_server_type = account.211.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.211.register_expires_overlap = account.211.subscribe_expires_overlap = account.211.auto_dial_enable = account.211.auto_dial_num = account.211.cp_source = account.211.transfer_refer_to_contact_header.enable = #V80 Add account.211.custom_ua = account.211.callpark_enable = account.211.check_cseq.enable = account.211.check_to_tag.enable = account.211.hold_use_inactive = account.211.line_seize.expires = account.211.update_ack_while_dialing = account.211.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.211.always_fwd.enable =
account.211.always_fwd.target =
account.211.always_fwd.off_code =
account.211.always_fwd.on_code =
account.211.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 970 OF 1142
account.211.busy_fwd.target = account.211.busy_fwd.off_code = account.211.busy_fwd.on_code = account.211.timeout_fwd.enable = account.211.timeout_fwd.target = account.211.timeout_fwd.timeout = account.211.timeout_fwd.off_code = account.211.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.211.dnd.enable =
account.211.dnd.on_code =
account.211.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.211.reg.enable =
handset.211.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.211.xsi.user =%BWLOGIN-ID-211% account.211.xsi.password =%XSIPASSWORD-211% account.211.xsi.host =%XSP_ADDRESS% account.211.xsi.server_type = account.211.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.211.ldap.enable =
handset.211.ldap.name_filter=
handset.211.ldap.number_filter=
handset.211.ldap.host=
handset.211.ldap.port=
handset.211.ldap.base=
handset.211.ldap.user=
handset.211.ldap.password=
handset.211.ldap.max_hits=
handset.211.ldap.name_attr=
handset.211.ldap.numb_attr=
handset.211.ldap.display_name=
handset.211.ldap.version=
handset.211.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 971 OF 1142
handset.211.ldap.ldap_sort= handset.211.ldap.tls_mode= handset.211.ldap.call_out_lookup= handset.211.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account212 Settings
##
##########################################################################
#############
account.212.enable=%BWLINE-BINARY-212% account.212.label=%BWEXTENSION-212% account.212.display_name=%BWCLID-212% account.212.auth_name=%BWAUTHUSER-212% account.212.user_name=%BWLINEPORT-212% account.212.password=%BWAUTHPASSWORD-212%
#W80B ADD account.212.sip_server.template = account.212.media_transmit.enable =
account.212.alarm.template = account.212.alarm.server = account.212.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.212.sip_server.1.failback_mode =
account.212.sip_server.1.failback_timeout =
account.212.sip_server.1.register_on_enable =
account.212.sip_server.1.failback_subscribe.enable =
account.212.sip_server.1.invite_retry_counts =
account.212.sip_server.1.only_signal_with_registered =
account.212.sip_server.2.failback_mode = account.212.sip_server.2.failback_timeout = account.212.sip_server.2.register_on_enable = account.212.sip_server.2.failback_subscribe.enable = account.212.sip_server.2.invite_retry_counts = account.212.sip_server.2.only_signal_with_registered =
account.212.naptr_build = account.212.fallback.redundancy_type = account.212.fallback.timeout =
account.212.dns_cache_type = account.212.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 972 OF 1142
account.212.anonymous_call = account.212.reject_anonymous_call = account.212.send_anonymous_code = account.212.anonymous_call_oncode = account.212.anonymous_call_offcode = account.212.send_anonymous_rejection_code = account.212.anonymous_reject_oncode = account.212.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.212.codec.g722.enable =
account.212.codec.g722.priority =
account.212.codec.g729.enable = account.212.codec.g729.priority =
account.212.codec.g726_16.enable = account.212.codec.g726_16.priority =
account.212.codec.g726_24.enable = account.212.codec.g726_24.priority =
account.212.codec.g726_32.enable = account.212.codec.g726_32.priority =
account.212.codec.g726_40.enable = account.212.codec.g726_40.priority =
account.212.codec.ilbc.enable = account.212.codec.ilbc.priority =
account.212.codec.pcmu.enable = account.212.codec.pcmu.priority =
account.212.codec.pcma.enable = account.212.codec.pcma.priority =
account.212.codec.opus.enable = account.212.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.212.nat.nat_traversal = account.212.nat.udp_update_enable = account.212.nat.udp_update_time = account.212.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 973 OF 1142
########################################################################## #############
account.212.blf.subscribe_period = account.212.dtmf.type = account.212.dtmf.dtmf_payload = account.212.dtmf.info_type = account.212.100rel_enable = account.212.subscribe_register = account.212.subscribe_mwi = account.212.subscribe_mwi_expires = account.212.subscribe_mwi_to_vm = voice_mail.number.212 = %BWVOICE-PORTAL-NUMBER-212% account.212.display_mwi.enable = account.212.cid_source = account.212.cid_source_privacy = account.212.cid_source_ppi = account.212.session_timer.enable = account.212.session_timer.expires = account.212.session_timer.refresher = account.212.enable_user_equal_phone = account.212.srtp_encryption = account.212.ptime = account.212.shared_line = %BWSHAREDLINE-BINARY-212% account.212.register_mac = account.212.register_line = account.212.reg_fail_retry_interval = account.212.reg_failed_retry_min_time = account.212.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.212.conf_type =
account.212.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-212%
account.212.sip_server_type = account.212.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.212.register_expires_overlap = account.212.subscribe_expires_overlap = account.212.auto_dial_enable = account.212.auto_dial_num = account.212.cp_source = account.212.transfer_refer_to_contact_header.enable = #V80 Add account.212.custom_ua = account.212.callpark_enable = account.212.check_cseq.enable = account.212.check_to_tag.enable = account.212.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 974 OF 1142
account.212.line_seize.expires = account.212.update_ack_while_dialing = account.212.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.212.always_fwd.enable =
account.212.always_fwd.target =
account.212.always_fwd.off_code =
account.212.always_fwd.on_code =
account.212.busy_fwd.enable =
account.212.busy_fwd.target =
account.212.busy_fwd.off_code =
account.212.busy_fwd.on_code =
account.212.timeout_fwd.enable =
account.212.timeout_fwd.target =
account.212.timeout_fwd.timeout =
account.212.timeout_fwd.off_code =
account.212.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.212.dnd.enable =
account.212.dnd.on_code =
account.212.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.212.reg.enable =
handset.212.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.212.xsi.user =%BWLOGIN-ID-212% account.212.xsi.password =%XSIPASSWORD-212% account.212.xsi.host =%XSP_ADDRESS% account.212.xsi.server_type = account.212.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 975 OF 1142
########################################################################## ############# handset.212.ldap.enable = handset.212.ldap.name_filter= handset.212.ldap.number_filter= handset.212.ldap.host= handset.212.ldap.port= handset.212.ldap.base= handset.212.ldap.user= handset.212.ldap.password= handset.212.ldap.max_hits= handset.212.ldap.name_attr= handset.212.ldap.numb_attr= handset.212.ldap.display_name= handset.212.ldap.version= handset.212.ldap.call_in_lookup= handset.212.ldap.ldap_sort= handset.212.ldap.tls_mode= handset.212.ldap.call_out_lookup= handset.212.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account213 Settings
##
##########################################################################
#############
account.213.enable=%BWLINE-BINARY-213% account.213.label=%BWEXTENSION-213% account.213.display_name=%BWCLID-213% account.213.auth_name=%BWAUTHUSER-213% account.213.user_name=%BWLINEPORT-213% account.213.password=%BWAUTHPASSWORD-213%
#W80B ADD account.213.sip_server.template = account.213.media_transmit.enable =
account.213.alarm.template = account.213.alarm.server = account.213.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.213.sip_server.1.failback_mode =
account.213.sip_server.1.failback_timeout =
account.213.sip_server.1.register_on_enable =
account.213.sip_server.1.failback_subscribe.enable =
account.213.sip_server.1.invite_retry_counts =
account.213.sip_server.1.only_signal_with_registered =
account.213.sip_server.2.failback_mode = account.213.sip_server.2.failback_timeout = account.213.sip_server.2.register_on_enable = account.213.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 976 OF 1142
account.213.sip_server.2.invite_retry_counts = account.213.sip_server.2.only_signal_with_registered =
account.213.naptr_build = account.213.fallback.redundancy_type = account.213.fallback.timeout =
account.213.dns_cache_type = account.213.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.213.anonymous_call =
account.213.reject_anonymous_call =
account.213.send_anonymous_code =
account.213.anonymous_call_oncode =
account.213.anonymous_call_offcode =
account.213.send_anonymous_rejection_code =
account.213.anonymous_reject_oncode =
account.213.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.213.codec.g722.enable =
account.213.codec.g722.priority =
account.213.codec.g729.enable = account.213.codec.g729.priority =
account.213.codec.g726_16.enable = account.213.codec.g726_16.priority =
account.213.codec.g726_24.enable = account.213.codec.g726_24.priority =
account.213.codec.g726_32.enable = account.213.codec.g726_32.priority =
account.213.codec.g726_40.enable = account.213.codec.g726_40.priority =
account.213.codec.ilbc.enable = account.213.codec.ilbc.priority =
account.213.codec.pcmu.enable = account.213.codec.pcmu.priority =
account.213.codec.pcma.enable = account.213.codec.pcma.priority =
account.213.codec.opus.enable = account.213.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 977 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.213.nat.nat_traversal = account.213.nat.udp_update_enable = account.213.nat.udp_update_time = account.213.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.213.blf.subscribe_period = account.213.dtmf.type = account.213.dtmf.dtmf_payload = account.213.dtmf.info_type = account.213.100rel_enable = account.213.subscribe_register = account.213.subscribe_mwi = account.213.subscribe_mwi_expires = account.213.subscribe_mwi_to_vm = voice_mail.number.213 = %BWVOICE-PORTAL-NUMBER-213% account.213.display_mwi.enable = account.213.cid_source = account.213.cid_source_privacy = account.213.cid_source_ppi = account.213.session_timer.enable = account.213.session_timer.expires = account.213.session_timer.refresher = account.213.enable_user_equal_phone = account.213.srtp_encryption = account.213.ptime = account.213.shared_line = %BWSHAREDLINE-BINARY-213% account.213.register_mac = account.213.register_line = account.213.reg_fail_retry_interval = account.213.reg_failed_retry_min_time = account.213.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.213.conf_type =
account.213.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-213%
account.213.sip_server_type = account.213.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 978 OF 1142
########################################################################## ############# ##DECT V81 Add
account.213.register_expires_overlap = account.213.subscribe_expires_overlap = account.213.auto_dial_enable = account.213.auto_dial_num = account.213.cp_source = account.213.transfer_refer_to_contact_header.enable = #V80 Add account.213.custom_ua = account.213.callpark_enable = account.213.check_cseq.enable = account.213.check_to_tag.enable = account.213.hold_use_inactive = account.213.line_seize.expires = account.213.update_ack_while_dialing = account.213.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.213.always_fwd.enable =
account.213.always_fwd.target =
account.213.always_fwd.off_code =
account.213.always_fwd.on_code =
account.213.busy_fwd.enable =
account.213.busy_fwd.target =
account.213.busy_fwd.off_code =
account.213.busy_fwd.on_code =
account.213.timeout_fwd.enable =
account.213.timeout_fwd.target =
account.213.timeout_fwd.timeout =
account.213.timeout_fwd.off_code =
account.213.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.213.dnd.enable =
account.213.dnd.on_code =
account.213.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.213.reg.enable =
handset.213.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 979 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.213.xsi.user =%BWLOGIN-ID-213% account.213.xsi.password =%XSIPASSWORD-213% account.213.xsi.host =%XSP_ADDRESS% account.213.xsi.server_type = account.213.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.213.ldap.enable =
handset.213.ldap.name_filter=
handset.213.ldap.number_filter=
handset.213.ldap.host=
handset.213.ldap.port=
handset.213.ldap.base=
handset.213.ldap.user=
handset.213.ldap.password=
handset.213.ldap.max_hits=
handset.213.ldap.name_attr=
handset.213.ldap.numb_attr=
handset.213.ldap.display_name=
handset.213.ldap.version=
handset.213.ldap.call_in_lookup=
handset.213.ldap.ldap_sort=
handset.213.ldap.tls_mode=
handset.213.ldap.call_out_lookup=
handset.213.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account214 Settings
##
##########################################################################
#############
account.214.enable=%BWLINE-BINARY-214% account.214.label=%BWEXTENSION-214% account.214.display_name=%BWCLID-214% account.214.auth_name=%BWAUTHUSER-214% account.214.user_name=%BWLINEPORT-214% account.214.password=%BWAUTHPASSWORD-214%
#W80B ADD account.214.sip_server.template = account.214.media_transmit.enable =
account.214.alarm.template = account.214.alarm.server = account.214.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 980 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.214.sip_server.1.failback_mode =
account.214.sip_server.1.failback_timeout =
account.214.sip_server.1.register_on_enable =
account.214.sip_server.1.failback_subscribe.enable =
account.214.sip_server.1.invite_retry_counts =
account.214.sip_server.1.only_signal_with_registered =
account.214.sip_server.2.failback_mode = account.214.sip_server.2.failback_timeout = account.214.sip_server.2.register_on_enable = account.214.sip_server.2.failback_subscribe.enable = account.214.sip_server.2.invite_retry_counts = account.214.sip_server.2.only_signal_with_registered =
account.214.naptr_build = account.214.fallback.redundancy_type = account.214.fallback.timeout =
account.214.dns_cache_type = account.214.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.214.anonymous_call =
account.214.reject_anonymous_call =
account.214.send_anonymous_code =
account.214.anonymous_call_oncode =
account.214.anonymous_call_offcode =
account.214.send_anonymous_rejection_code =
account.214.anonymous_reject_oncode =
account.214.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.214.codec.g722.enable =
account.214.codec.g722.priority =
account.214.codec.g729.enable = account.214.codec.g729.priority =
account.214.codec.g726_16.enable = account.214.codec.g726_16.priority =
account.214.codec.g726_24.enable = account.214.codec.g726_24.priority =
account.214.codec.g726_32.enable = account.214.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 981 OF 1142
account.214.codec.g726_40.enable = account.214.codec.g726_40.priority =
account.214.codec.ilbc.enable = account.214.codec.ilbc.priority =
account.214.codec.pcmu.enable = account.214.codec.pcmu.priority =
account.214.codec.pcma.enable = account.214.codec.pcma.priority =
account.214.codec.opus.enable = account.214.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.214.nat.nat_traversal = account.214.nat.udp_update_enable = account.214.nat.udp_update_time = account.214.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.214.blf.subscribe_period = account.214.dtmf.type = account.214.dtmf.dtmf_payload = account.214.dtmf.info_type = account.214.100rel_enable = account.214.subscribe_register = account.214.subscribe_mwi = account.214.subscribe_mwi_expires = account.214.subscribe_mwi_to_vm = voice_mail.number.214 = %BWVOICE-PORTAL-NUMBER-214% account.214.display_mwi.enable = account.214.cid_source = account.214.cid_source_privacy = account.214.cid_source_ppi = account.214.session_timer.enable = account.214.session_timer.expires = account.214.session_timer.refresher = account.214.enable_user_equal_phone = account.214.srtp_encryption = account.214.ptime = account.214.shared_line = %BWSHAREDLINE-BINARY-214% account.214.register_mac = account.214.register_line = account.214.reg_fail_retry_interval = account.214.reg_failed_retry_min_time = account.214.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 982 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.214.conf_type =
account.214.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-214%
account.214.sip_server_type = account.214.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.214.register_expires_overlap = account.214.subscribe_expires_overlap = account.214.auto_dial_enable = account.214.auto_dial_num = account.214.cp_source = account.214.transfer_refer_to_contact_header.enable = #V80 Add account.214.custom_ua = account.214.callpark_enable = account.214.check_cseq.enable = account.214.check_to_tag.enable = account.214.hold_use_inactive = account.214.line_seize.expires = account.214.update_ack_while_dialing = account.214.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.214.always_fwd.enable =
account.214.always_fwd.target =
account.214.always_fwd.off_code =
account.214.always_fwd.on_code =
account.214.busy_fwd.enable =
account.214.busy_fwd.target =
account.214.busy_fwd.off_code =
account.214.busy_fwd.on_code =
account.214.timeout_fwd.enable =
account.214.timeout_fwd.target =
account.214.timeout_fwd.timeout =
account.214.timeout_fwd.off_code =
account.214.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 983 OF 1142
account.214.dnd.enable = account.214.dnd.on_code = account.214.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.214.reg.enable =
handset.214.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.214.xsi.user =%BWLOGIN-ID-214% account.214.xsi.password =%XSIPASSWORD-214% account.214.xsi.host =%XSP_ADDRESS% account.214.xsi.server_type = account.214.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.214.ldap.enable =
handset.214.ldap.name_filter=
handset.214.ldap.number_filter=
handset.214.ldap.host=
handset.214.ldap.port=
handset.214.ldap.base=
handset.214.ldap.user=
handset.214.ldap.password=
handset.214.ldap.max_hits=
handset.214.ldap.name_attr=
handset.214.ldap.numb_attr=
handset.214.ldap.display_name=
handset.214.ldap.version=
handset.214.ldap.call_in_lookup=
handset.214.ldap.ldap_sort=
handset.214.ldap.tls_mode=
handset.214.ldap.call_out_lookup=
handset.214.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account215 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 984 OF 1142
account.215.enable=%BWLINE-BINARY-215% account.215.label=%BWEXTENSION-215% account.215.display_name=%BWCLID-215% account.215.auth_name=%BWAUTHUSER-215% account.215.user_name=%BWLINEPORT-215% account.215.password=%BWAUTHPASSWORD-215%
#W80B ADD account.215.sip_server.template = account.215.media_transmit.enable =
account.215.alarm.template = account.215.alarm.server = account.215.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.215.sip_server.1.failback_mode =
account.215.sip_server.1.failback_timeout =
account.215.sip_server.1.register_on_enable =
account.215.sip_server.1.failback_subscribe.enable =
account.215.sip_server.1.invite_retry_counts =
account.215.sip_server.1.only_signal_with_registered =
account.215.sip_server.2.failback_mode = account.215.sip_server.2.failback_timeout = account.215.sip_server.2.register_on_enable = account.215.sip_server.2.failback_subscribe.enable = account.215.sip_server.2.invite_retry_counts = account.215.sip_server.2.only_signal_with_registered =
account.215.naptr_build = account.215.fallback.redundancy_type = account.215.fallback.timeout =
account.215.dns_cache_type = account.215.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.215.anonymous_call =
account.215.reject_anonymous_call =
account.215.send_anonymous_code =
account.215.anonymous_call_oncode =
account.215.anonymous_call_offcode =
account.215.send_anonymous_rejection_code =
account.215.anonymous_reject_oncode =
account.215.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 985 OF 1142
########################################################################## ############# account.215.codec.g722.enable = account.215.codec.g722.priority =
account.215.codec.g729.enable = account.215.codec.g729.priority =
account.215.codec.g726_16.enable = account.215.codec.g726_16.priority =
account.215.codec.g726_24.enable = account.215.codec.g726_24.priority =
account.215.codec.g726_32.enable = account.215.codec.g726_32.priority =
account.215.codec.g726_40.enable = account.215.codec.g726_40.priority =
account.215.codec.ilbc.enable = account.215.codec.ilbc.priority =
account.215.codec.pcmu.enable = account.215.codec.pcmu.priority =
account.215.codec.pcma.enable = account.215.codec.pcma.priority =
account.215.codec.opus.enable = account.215.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.215.nat.nat_traversal = account.215.nat.udp_update_enable = account.215.nat.udp_update_time = account.215.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.215.blf.subscribe_period = account.215.dtmf.type = account.215.dtmf.dtmf_payload = account.215.dtmf.info_type = account.215.100rel_enable = account.215.subscribe_register = account.215.subscribe_mwi = account.215.subscribe_mwi_expires = account.215.subscribe_mwi_to_vm = voice_mail.number.215 = %BWVOICE-PORTAL-NUMBER-215% account.215.display_mwi.enable = account.215.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 986 OF 1142
account.215.cid_source_privacy = account.215.cid_source_ppi = account.215.session_timer.enable = account.215.session_timer.expires = account.215.session_timer.refresher = account.215.enable_user_equal_phone = account.215.srtp_encryption = account.215.ptime = account.215.shared_line = %BWSHAREDLINE-BINARY-215% account.215.register_mac = account.215.register_line = account.215.reg_fail_retry_interval = account.215.reg_failed_retry_min_time = account.215.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.215.conf_type =
account.215.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-215%
account.215.sip_server_type = account.215.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.215.register_expires_overlap = account.215.subscribe_expires_overlap = account.215.auto_dial_enable = account.215.auto_dial_num = account.215.cp_source = account.215.transfer_refer_to_contact_header.enable = #V80 Add account.215.custom_ua = account.215.callpark_enable = account.215.check_cseq.enable = account.215.check_to_tag.enable = account.215.hold_use_inactive = account.215.line_seize.expires = account.215.update_ack_while_dialing = account.215.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.215.always_fwd.enable =
account.215.always_fwd.target =
account.215.always_fwd.off_code =
account.215.always_fwd.on_code =
account.215.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 987 OF 1142
account.215.busy_fwd.target = account.215.busy_fwd.off_code = account.215.busy_fwd.on_code = account.215.timeout_fwd.enable = account.215.timeout_fwd.target = account.215.timeout_fwd.timeout = account.215.timeout_fwd.off_code = account.215.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.215.dnd.enable =
account.215.dnd.on_code =
account.215.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.215.reg.enable =
handset.215.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.215.xsi.user =%BWLOGIN-ID-215% account.215.xsi.password =%XSIPASSWORD-215% account.215.xsi.host =%XSP_ADDRESS% account.215.xsi.server_type = account.215.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.215.ldap.enable =
handset.215.ldap.name_filter=
handset.215.ldap.number_filter=
handset.215.ldap.host=
handset.215.ldap.port=
handset.215.ldap.base=
handset.215.ldap.user=
handset.215.ldap.password=
handset.215.ldap.max_hits=
handset.215.ldap.name_attr=
handset.215.ldap.numb_attr=
handset.215.ldap.display_name=
handset.215.ldap.version=
handset.215.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 988 OF 1142
handset.215.ldap.ldap_sort= handset.215.ldap.tls_mode= handset.215.ldap.call_out_lookup= handset.215.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account216 Settings
##
##########################################################################
#############
account.216.enable=%BWLINE-BINARY-216% account.216.label=%BWEXTENSION-216% account.216.display_name=%BWCLID-216% account.216.auth_name=%BWAUTHUSER-216% account.216.user_name=%BWLINEPORT-216% account.216.password=%BWAUTHPASSWORD-216%
#W80B ADD account.216.sip_server.template = account.216.media_transmit.enable =
account.216.alarm.template = account.216.alarm.server = account.216.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.216.sip_server.1.failback_mode =
account.216.sip_server.1.failback_timeout =
account.216.sip_server.1.register_on_enable =
account.216.sip_server.1.failback_subscribe.enable =
account.216.sip_server.1.invite_retry_counts =
account.216.sip_server.1.only_signal_with_registered =
account.216.sip_server.2.failback_mode = account.216.sip_server.2.failback_timeout = account.216.sip_server.2.register_on_enable = account.216.sip_server.2.failback_subscribe.enable = account.216.sip_server.2.invite_retry_counts = account.216.sip_server.2.only_signal_with_registered =
account.216.naptr_build = account.216.fallback.redundancy_type = account.216.fallback.timeout =
account.216.dns_cache_type = account.216.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 989 OF 1142
account.216.anonymous_call = account.216.reject_anonymous_call = account.216.send_anonymous_code = account.216.anonymous_call_oncode = account.216.anonymous_call_offcode = account.216.send_anonymous_rejection_code = account.216.anonymous_reject_oncode = account.216.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.216.codec.g722.enable =
account.216.codec.g722.priority =
account.216.codec.g729.enable = account.216.codec.g729.priority =
account.216.codec.g726_16.enable = account.216.codec.g726_16.priority =
account.216.codec.g726_24.enable = account.216.codec.g726_24.priority =
account.216.codec.g726_32.enable = account.216.codec.g726_32.priority =
account.216.codec.g726_40.enable = account.216.codec.g726_40.priority =
account.216.codec.ilbc.enable = account.216.codec.ilbc.priority =
account.216.codec.pcmu.enable = account.216.codec.pcmu.priority =
account.216.codec.pcma.enable = account.216.codec.pcma.priority =
account.216.codec.opus.enable = account.216.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.216.nat.nat_traversal = account.216.nat.udp_update_enable = account.216.nat.udp_update_time = account.216.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 990 OF 1142
########################################################################## #############
account.216.blf.subscribe_period = account.216.dtmf.type = account.216.dtmf.dtmf_payload = account.216.dtmf.info_type = account.216.100rel_enable = account.216.subscribe_register = account.216.subscribe_mwi = account.216.subscribe_mwi_expires = account.216.subscribe_mwi_to_vm = voice_mail.number.216 = %BWVOICE-PORTAL-NUMBER-216% account.216.display_mwi.enable = account.216.cid_source = account.216.cid_source_privacy = account.216.cid_source_ppi = account.216.session_timer.enable = account.216.session_timer.expires = account.216.session_timer.refresher = account.216.enable_user_equal_phone = account.216.srtp_encryption = account.216.ptime = account.216.shared_line = %BWSHAREDLINE-BINARY-216% account.216.register_mac = account.216.register_line = account.216.reg_fail_retry_interval = account.216.reg_failed_retry_min_time = account.216.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.216.conf_type =
account.216.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-216%
account.216.sip_server_type = account.216.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.216.register_expires_overlap = account.216.subscribe_expires_overlap = account.216.auto_dial_enable = account.216.auto_dial_num = account.216.cp_source = account.216.transfer_refer_to_contact_header.enable = #V80 Add account.216.custom_ua = account.216.callpark_enable = account.216.check_cseq.enable = account.216.check_to_tag.enable = account.216.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 991 OF 1142
account.216.line_seize.expires = account.216.update_ack_while_dialing = account.216.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.216.always_fwd.enable =
account.216.always_fwd.target =
account.216.always_fwd.off_code =
account.216.always_fwd.on_code =
account.216.busy_fwd.enable =
account.216.busy_fwd.target =
account.216.busy_fwd.off_code =
account.216.busy_fwd.on_code =
account.216.timeout_fwd.enable =
account.216.timeout_fwd.target =
account.216.timeout_fwd.timeout =
account.216.timeout_fwd.off_code =
account.216.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.216.dnd.enable =
account.216.dnd.on_code =
account.216.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.216.reg.enable =
handset.216.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.216.xsi.user =%BWLOGIN-ID-216% account.216.xsi.password =%XSIPASSWORD-216% account.216.xsi.host =%XSP_ADDRESS% account.216.xsi.server_type = account.216.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 992 OF 1142
########################################################################## ############# handset.216.ldap.enable = handset.216.ldap.name_filter= handset.216.ldap.number_filter= handset.216.ldap.host= handset.216.ldap.port= handset.216.ldap.base= handset.216.ldap.user= handset.216.ldap.password= handset.216.ldap.max_hits= handset.216.ldap.name_attr= handset.216.ldap.numb_attr= handset.216.ldap.display_name= handset.216.ldap.version= handset.216.ldap.call_in_lookup= handset.216.ldap.ldap_sort= handset.216.ldap.tls_mode= handset.216.ldap.call_out_lookup= handset.216.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account217 Settings
##
##########################################################################
#############
account.217.enable=%BWLINE-BINARY-217% account.217.label=%BWEXTENSION-217% account.217.display_name=%BWCLID-217% account.217.auth_name=%BWAUTHUSER-217% account.217.user_name=%BWLINEPORT-217% account.217.password=%BWAUTHPASSWORD-217%
#W80B ADD account.217.sip_server.template = account.217.media_transmit.enable =
account.217.alarm.template = account.217.alarm.server = account.217.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.217.sip_server.1.failback_mode =
account.217.sip_server.1.failback_timeout =
account.217.sip_server.1.register_on_enable =
account.217.sip_server.1.failback_subscribe.enable =
account.217.sip_server.1.invite_retry_counts =
account.217.sip_server.1.only_signal_with_registered =
account.217.sip_server.2.failback_mode = account.217.sip_server.2.failback_timeout = account.217.sip_server.2.register_on_enable = account.217.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 993 OF 1142
account.217.sip_server.2.invite_retry_counts = account.217.sip_server.2.only_signal_with_registered =
account.217.naptr_build = account.217.fallback.redundancy_type = account.217.fallback.timeout =
account.217.dns_cache_type = account.217.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.217.anonymous_call =
account.217.reject_anonymous_call =
account.217.send_anonymous_code =
account.217.anonymous_call_oncode =
account.217.anonymous_call_offcode =
account.217.send_anonymous_rejection_code =
account.217.anonymous_reject_oncode =
account.217.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.217.codec.g722.enable =
account.217.codec.g722.priority =
account.217.codec.g729.enable = account.217.codec.g729.priority =
account.217.codec.g726_16.enable = account.217.codec.g726_16.priority =
account.217.codec.g726_24.enable = account.217.codec.g726_24.priority =
account.217.codec.g726_32.enable = account.217.codec.g726_32.priority =
account.217.codec.g726_40.enable = account.217.codec.g726_40.priority =
account.217.codec.ilbc.enable = account.217.codec.ilbc.priority =
account.217.codec.pcmu.enable = account.217.codec.pcmu.priority =
account.217.codec.pcma.enable = account.217.codec.pcma.priority =
account.217.codec.opus.enable = account.217.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 994 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.217.nat.nat_traversal = account.217.nat.udp_update_enable = account.217.nat.udp_update_time = account.217.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.217.blf.subscribe_period = account.217.dtmf.type = account.217.dtmf.dtmf_payload = account.217.dtmf.info_type = account.217.100rel_enable = account.217.subscribe_register = account.217.subscribe_mwi = account.217.subscribe_mwi_expires = account.217.subscribe_mwi_to_vm = voice_mail.number.217 = %BWVOICE-PORTAL-NUMBER-217% account.217.display_mwi.enable = account.217.cid_source = account.217.cid_source_privacy = account.217.cid_source_ppi = account.217.session_timer.enable = account.217.session_timer.expires = account.217.session_timer.refresher = account.217.enable_user_equal_phone = account.217.srtp_encryption = account.217.ptime = account.217.shared_line = %BWSHAREDLINE-BINARY-217% account.217.register_mac = account.217.register_line = account.217.reg_fail_retry_interval = account.217.reg_failed_retry_min_time = account.217.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.217.conf_type =
account.217.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-217%
account.217.sip_server_type = account.217.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 995 OF 1142
########################################################################## ############# ##DECT V81 Add
account.217.register_expires_overlap = account.217.subscribe_expires_overlap = account.217.auto_dial_enable = account.217.auto_dial_num = account.217.cp_source = account.217.transfer_refer_to_contact_header.enable = #V80 Add account.217.custom_ua = account.217.callpark_enable = account.217.check_cseq.enable = account.217.check_to_tag.enable = account.217.hold_use_inactive = account.217.line_seize.expires = account.217.update_ack_while_dialing = account.217.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.217.always_fwd.enable =
account.217.always_fwd.target =
account.217.always_fwd.off_code =
account.217.always_fwd.on_code =
account.217.busy_fwd.enable =
account.217.busy_fwd.target =
account.217.busy_fwd.off_code =
account.217.busy_fwd.on_code =
account.217.timeout_fwd.enable =
account.217.timeout_fwd.target =
account.217.timeout_fwd.timeout =
account.217.timeout_fwd.off_code =
account.217.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.217.dnd.enable =
account.217.dnd.on_code =
account.217.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.217.reg.enable =
handset.217.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 996 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.217.xsi.user =%BWLOGIN-ID-217% account.217.xsi.password =%XSIPASSWORD-217% account.217.xsi.host =%XSP_ADDRESS% account.217.xsi.server_type = account.217.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.217.ldap.enable =
handset.217.ldap.name_filter=
handset.217.ldap.number_filter=
handset.217.ldap.host=
handset.217.ldap.port=
handset.217.ldap.base=
handset.217.ldap.user=
handset.217.ldap.password=
handset.217.ldap.max_hits=
handset.217.ldap.name_attr=
handset.217.ldap.numb_attr=
handset.217.ldap.display_name=
handset.217.ldap.version=
handset.217.ldap.call_in_lookup=
handset.217.ldap.ldap_sort=
handset.217.ldap.tls_mode=
handset.217.ldap.call_out_lookup=
handset.217.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account218 Settings
##
##########################################################################
#############
account.218.enable=%BWLINE-BINARY-218% account.218.label=%BWEXTENSION-218% account.218.display_name=%BWCLID-218% account.218.auth_name=%BWAUTHUSER-218% account.218.user_name=%BWLINEPORT-218% account.218.password=%BWAUTHPASSWORD-218%
#W80B ADD account.218.sip_server.template = account.218.media_transmit.enable =
account.218.alarm.template = account.218.alarm.server = account.218.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 997 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.218.sip_server.1.failback_mode =
account.218.sip_server.1.failback_timeout =
account.218.sip_server.1.register_on_enable =
account.218.sip_server.1.failback_subscribe.enable =
account.218.sip_server.1.invite_retry_counts =
account.218.sip_server.1.only_signal_with_registered =
account.218.sip_server.2.failback_mode = account.218.sip_server.2.failback_timeout = account.218.sip_server.2.register_on_enable = account.218.sip_server.2.failback_subscribe.enable = account.218.sip_server.2.invite_retry_counts = account.218.sip_server.2.only_signal_with_registered =
account.218.naptr_build = account.218.fallback.redundancy_type = account.218.fallback.timeout =
account.218.dns_cache_type = account.218.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.218.anonymous_call =
account.218.reject_anonymous_call =
account.218.send_anonymous_code =
account.218.anonymous_call_oncode =
account.218.anonymous_call_offcode =
account.218.send_anonymous_rejection_code =
account.218.anonymous_reject_oncode =
account.218.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.218.codec.g722.enable =
account.218.codec.g722.priority =
account.218.codec.g729.enable = account.218.codec.g729.priority =
account.218.codec.g726_16.enable = account.218.codec.g726_16.priority =
account.218.codec.g726_24.enable = account.218.codec.g726_24.priority =
account.218.codec.g726_32.enable = account.218.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 998 OF 1142
account.218.codec.g726_40.enable = account.218.codec.g726_40.priority =
account.218.codec.ilbc.enable = account.218.codec.ilbc.priority =
account.218.codec.pcmu.enable = account.218.codec.pcmu.priority =
account.218.codec.pcma.enable = account.218.codec.pcma.priority =
account.218.codec.opus.enable = account.218.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.218.nat.nat_traversal = account.218.nat.udp_update_enable = account.218.nat.udp_update_time = account.218.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.218.blf.subscribe_period = account.218.dtmf.type = account.218.dtmf.dtmf_payload = account.218.dtmf.info_type = account.218.100rel_enable = account.218.subscribe_register = account.218.subscribe_mwi = account.218.subscribe_mwi_expires = account.218.subscribe_mwi_to_vm = voice_mail.number.218 = %BWVOICE-PORTAL-NUMBER-218% account.218.display_mwi.enable = account.218.cid_source = account.218.cid_source_privacy = account.218.cid_source_ppi = account.218.session_timer.enable = account.218.session_timer.expires = account.218.session_timer.refresher = account.218.enable_user_equal_phone = account.218.srtp_encryption = account.218.ptime = account.218.shared_line = %BWSHAREDLINE-BINARY-218% account.218.register_mac = account.218.register_line = account.218.reg_fail_retry_interval = account.218.reg_failed_retry_min_time = account.218.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 999 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.218.conf_type =
account.218.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-218%
account.218.sip_server_type = account.218.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.218.register_expires_overlap = account.218.subscribe_expires_overlap = account.218.auto_dial_enable = account.218.auto_dial_num = account.218.cp_source = account.218.transfer_refer_to_contact_header.enable = #V80 Add account.218.custom_ua = account.218.callpark_enable = account.218.check_cseq.enable = account.218.check_to_tag.enable = account.218.hold_use_inactive = account.218.line_seize.expires = account.218.update_ack_while_dialing = account.218.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.218.always_fwd.enable =
account.218.always_fwd.target =
account.218.always_fwd.off_code =
account.218.always_fwd.on_code =
account.218.busy_fwd.enable =
account.218.busy_fwd.target =
account.218.busy_fwd.off_code =
account.218.busy_fwd.on_code =
account.218.timeout_fwd.enable =
account.218.timeout_fwd.target =
account.218.timeout_fwd.timeout =
account.218.timeout_fwd.off_code =
account.218.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1000 OF 1142
account.218.dnd.enable = account.218.dnd.on_code = account.218.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.218.reg.enable =
handset.218.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.218.xsi.user =%BWLOGIN-ID-218% account.218.xsi.password =%XSIPASSWORD-218% account.218.xsi.host =%XSP_ADDRESS% account.218.xsi.server_type = account.218.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.218.ldap.enable =
handset.218.ldap.name_filter=
handset.218.ldap.number_filter=
handset.218.ldap.host=
handset.218.ldap.port=
handset.218.ldap.base=
handset.218.ldap.user=
handset.218.ldap.password=
handset.218.ldap.max_hits=
handset.218.ldap.name_attr=
handset.218.ldap.numb_attr=
handset.218.ldap.display_name=
handset.218.ldap.version=
handset.218.ldap.call_in_lookup=
handset.218.ldap.ldap_sort=
handset.218.ldap.tls_mode=
handset.218.ldap.call_out_lookup=
handset.218.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account219 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1001 OF 1142
account.219.enable=%BWLINE-BINARY-219% account.219.label=%BWEXTENSION-219% account.219.display_name=%BWCLID-219% account.219.auth_name=%BWAUTHUSER-219% account.219.user_name=%BWLINEPORT-219% account.219.password=%BWAUTHPASSWORD-219%
#W80B ADD account.219.sip_server.template = account.219.media_transmit.enable =
account.219.alarm.template = account.219.alarm.server = account.219.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.219.sip_server.1.failback_mode =
account.219.sip_server.1.failback_timeout =
account.219.sip_server.1.register_on_enable =
account.219.sip_server.1.failback_subscribe.enable =
account.219.sip_server.1.invite_retry_counts =
account.219.sip_server.1.only_signal_with_registered =
account.219.sip_server.2.failback_mode = account.219.sip_server.2.failback_timeout = account.219.sip_server.2.register_on_enable = account.219.sip_server.2.failback_subscribe.enable = account.219.sip_server.2.invite_retry_counts = account.219.sip_server.2.only_signal_with_registered =
account.219.naptr_build = account.219.fallback.redundancy_type = account.219.fallback.timeout =
account.219.dns_cache_type = account.219.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.219.anonymous_call =
account.219.reject_anonymous_call =
account.219.send_anonymous_code =
account.219.anonymous_call_oncode =
account.219.anonymous_call_offcode =
account.219.send_anonymous_rejection_code =
account.219.anonymous_reject_oncode =
account.219.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1002 OF 1142
########################################################################## ############# account.219.codec.g722.enable = account.219.codec.g722.priority =
account.219.codec.g729.enable = account.219.codec.g729.priority =
account.219.codec.g726_16.enable = account.219.codec.g726_16.priority =
account.219.codec.g726_24.enable = account.219.codec.g726_24.priority =
account.219.codec.g726_32.enable = account.219.codec.g726_32.priority =
account.219.codec.g726_40.enable = account.219.codec.g726_40.priority =
account.219.codec.ilbc.enable = account.219.codec.ilbc.priority =
account.219.codec.pcmu.enable = account.219.codec.pcmu.priority =
account.219.codec.pcma.enable = account.219.codec.pcma.priority =
account.219.codec.opus.enable = account.219.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.219.nat.nat_traversal = account.219.nat.udp_update_enable = account.219.nat.udp_update_time = account.219.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.219.blf.subscribe_period = account.219.dtmf.type = account.219.dtmf.dtmf_payload = account.219.dtmf.info_type = account.219.100rel_enable = account.219.subscribe_register = account.219.subscribe_mwi = account.219.subscribe_mwi_expires = account.219.subscribe_mwi_to_vm = voice_mail.number.219 = %BWVOICE-PORTAL-NUMBER-219% account.219.display_mwi.enable = account.219.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1003 OF 1142
account.219.cid_source_privacy = account.219.cid_source_ppi = account.219.session_timer.enable = account.219.session_timer.expires = account.219.session_timer.refresher = account.219.enable_user_equal_phone = account.219.srtp_encryption = account.219.ptime = account.219.shared_line = %BWSHAREDLINE-BINARY-219% account.219.register_mac = account.219.register_line = account.219.reg_fail_retry_interval = account.219.reg_failed_retry_min_time = account.219.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.219.conf_type =
account.219.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-219%
account.219.sip_server_type = account.219.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.219.register_expires_overlap = account.219.subscribe_expires_overlap = account.219.auto_dial_enable = account.219.auto_dial_num = account.219.cp_source = account.219.transfer_refer_to_contact_header.enable = #V80 Add account.219.custom_ua = account.219.callpark_enable = account.219.check_cseq.enable = account.219.check_to_tag.enable = account.219.hold_use_inactive = account.219.line_seize.expires = account.219.update_ack_while_dialing = account.219.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.219.always_fwd.enable =
account.219.always_fwd.target =
account.219.always_fwd.off_code =
account.219.always_fwd.on_code =
account.219.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1004 OF 1142
account.219.busy_fwd.target = account.219.busy_fwd.off_code = account.219.busy_fwd.on_code = account.219.timeout_fwd.enable = account.219.timeout_fwd.target = account.219.timeout_fwd.timeout = account.219.timeout_fwd.off_code = account.219.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.219.dnd.enable =
account.219.dnd.on_code =
account.219.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.219.reg.enable =
handset.219.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.219.xsi.user =%BWLOGIN-ID-219% account.219.xsi.password =%XSIPASSWORD-219% account.219.xsi.host =%XSP_ADDRESS% account.219.xsi.server_type = account.219.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.219.ldap.enable =
handset.219.ldap.name_filter=
handset.219.ldap.number_filter=
handset.219.ldap.host=
handset.219.ldap.port=
handset.219.ldap.base=
handset.219.ldap.user=
handset.219.ldap.password=
handset.219.ldap.max_hits=
handset.219.ldap.name_attr=
handset.219.ldap.numb_attr=
handset.219.ldap.display_name=
handset.219.ldap.version=
handset.219.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1005 OF 1142
handset.219.ldap.ldap_sort= handset.219.ldap.tls_mode= handset.219.ldap.call_out_lookup= handset.219.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account220 Settings
##
##########################################################################
#############
account.220.enable=%BWLINE-BINARY-220% account.220.label=%BWEXTENSION-220% account.220.display_name=%BWCLID-220% account.220.auth_name=%BWAUTHUSER-220% account.220.user_name=%BWLINEPORT-220% account.220.password=%BWAUTHPASSWORD-220%
#W80B ADD account.220.sip_server.template = account.220.media_transmit.enable =
account.220.alarm.template = account.220.alarm.server = account.220.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.220.sip_server.1.failback_mode =
account.220.sip_server.1.failback_timeout =
account.220.sip_server.1.register_on_enable =
account.220.sip_server.1.failback_subscribe.enable =
account.220.sip_server.1.invite_retry_counts =
account.220.sip_server.1.only_signal_with_registered =
account.220.sip_server.2.failback_mode = account.220.sip_server.2.failback_timeout = account.220.sip_server.2.register_on_enable = account.220.sip_server.2.failback_subscribe.enable = account.220.sip_server.2.invite_retry_counts = account.220.sip_server.2.only_signal_with_registered =
account.220.naptr_build = account.220.fallback.redundancy_type = account.220.fallback.timeout =
account.220.dns_cache_type = account.220.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1006 OF 1142
account.220.anonymous_call = account.220.reject_anonymous_call = account.220.send_anonymous_code = account.220.anonymous_call_oncode = account.220.anonymous_call_offcode = account.220.send_anonymous_rejection_code = account.220.anonymous_reject_oncode = account.220.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.220.codec.g722.enable =
account.220.codec.g722.priority =
account.220.codec.g729.enable = account.220.codec.g729.priority =
account.220.codec.g726_16.enable = account.220.codec.g726_16.priority =
account.220.codec.g726_24.enable = account.220.codec.g726_24.priority =
account.220.codec.g726_32.enable = account.220.codec.g726_32.priority =
account.220.codec.g726_40.enable = account.220.codec.g726_40.priority =
account.220.codec.ilbc.enable = account.220.codec.ilbc.priority =
account.220.codec.pcmu.enable = account.220.codec.pcmu.priority =
account.220.codec.pcma.enable = account.220.codec.pcma.priority =
account.220.codec.opus.enable = account.220.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.220.nat.nat_traversal = account.220.nat.udp_update_enable = account.220.nat.udp_update_time = account.220.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1007 OF 1142
########################################################################## #############
account.220.blf.subscribe_period = account.220.dtmf.type = account.220.dtmf.dtmf_payload = account.220.dtmf.info_type = account.220.100rel_enable = account.220.subscribe_register = account.220.subscribe_mwi = account.220.subscribe_mwi_expires = account.220.subscribe_mwi_to_vm = voice_mail.number.220 = %BWVOICE-PORTAL-NUMBER-220% account.220.display_mwi.enable = account.220.cid_source = account.220.cid_source_privacy = account.220.cid_source_ppi = account.220.session_timer.enable = account.220.session_timer.expires = account.220.session_timer.refresher = account.220.enable_user_equal_phone = account.220.srtp_encryption = account.220.ptime = account.220.shared_line = %BWSHAREDLINE-BINARY-220% account.220.register_mac = account.220.register_line = account.220.reg_fail_retry_interval = account.220.reg_failed_retry_min_time = account.220.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.220.conf_type =
account.220.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-220%
account.220.sip_server_type = account.220.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.220.register_expires_overlap = account.220.subscribe_expires_overlap = account.220.auto_dial_enable = account.220.auto_dial_num = account.220.cp_source = account.220.transfer_refer_to_contact_header.enable = #V80 Add account.220.custom_ua = account.220.callpark_enable = account.220.check_cseq.enable = account.220.check_to_tag.enable = account.220.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1008 OF 1142
account.220.line_seize.expires = account.220.update_ack_while_dialing = account.220.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.220.always_fwd.enable =
account.220.always_fwd.target =
account.220.always_fwd.off_code =
account.220.always_fwd.on_code =
account.220.busy_fwd.enable =
account.220.busy_fwd.target =
account.220.busy_fwd.off_code =
account.220.busy_fwd.on_code =
account.220.timeout_fwd.enable =
account.220.timeout_fwd.target =
account.220.timeout_fwd.timeout =
account.220.timeout_fwd.off_code =
account.220.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.220.dnd.enable =
account.220.dnd.on_code =
account.220.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.220.reg.enable =
handset.220.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.220.xsi.user =%BWLOGIN-ID-220% account.220.xsi.password =%XSIPASSWORD-220% account.220.xsi.host =%XSP_ADDRESS% account.220.xsi.server_type = account.220.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1009 OF 1142
########################################################################## ############# handset.220.ldap.enable = handset.220.ldap.name_filter= handset.220.ldap.number_filter= handset.220.ldap.host= handset.220.ldap.port= handset.220.ldap.base= handset.220.ldap.user= handset.220.ldap.password= handset.220.ldap.max_hits= handset.220.ldap.name_attr= handset.220.ldap.numb_attr= handset.220.ldap.display_name= handset.220.ldap.version= handset.220.ldap.call_in_lookup= handset.220.ldap.ldap_sort= handset.220.ldap.tls_mode= handset.220.ldap.call_out_lookup= handset.220.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account221 Settings
##
##########################################################################
#############
account.221.enable=%BWLINE-BINARY-221% account.221.label=%BWEXTENSION-221% account.221.display_name=%BWCLID-221% account.221.auth_name=%BWAUTHUSER-221% account.221.user_name=%BWLINEPORT-221% account.221.password=%BWAUTHPASSWORD-221%
#W80B ADD account.221.sip_server.template = account.221.media_transmit.enable =
account.221.alarm.template = account.221.alarm.server = account.221.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.221.sip_server.1.failback_mode =
account.221.sip_server.1.failback_timeout =
account.221.sip_server.1.register_on_enable =
account.221.sip_server.1.failback_subscribe.enable =
account.221.sip_server.1.invite_retry_counts =
account.221.sip_server.1.only_signal_with_registered =
account.221.sip_server.2.failback_mode = account.221.sip_server.2.failback_timeout = account.221.sip_server.2.register_on_enable = account.221.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1010 OF 1142
account.221.sip_server.2.invite_retry_counts = account.221.sip_server.2.only_signal_with_registered =
account.221.naptr_build = account.221.fallback.redundancy_type = account.221.fallback.timeout =
account.221.dns_cache_type = account.221.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.221.anonymous_call =
account.221.reject_anonymous_call =
account.221.send_anonymous_code =
account.221.anonymous_call_oncode =
account.221.anonymous_call_offcode =
account.221.send_anonymous_rejection_code =
account.221.anonymous_reject_oncode =
account.221.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.221.codec.g722.enable =
account.221.codec.g722.priority =
account.221.codec.g729.enable = account.221.codec.g729.priority =
account.221.codec.g726_16.enable = account.221.codec.g726_16.priority =
account.221.codec.g726_24.enable = account.221.codec.g726_24.priority =
account.221.codec.g726_32.enable = account.221.codec.g726_32.priority =
account.221.codec.g726_40.enable = account.221.codec.g726_40.priority =
account.221.codec.ilbc.enable = account.221.codec.ilbc.priority =
account.221.codec.pcmu.enable = account.221.codec.pcmu.priority =
account.221.codec.pcma.enable = account.221.codec.pcma.priority =
account.221.codec.opus.enable = account.221.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1011 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.221.nat.nat_traversal = account.221.nat.udp_update_enable = account.221.nat.udp_update_time = account.221.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.221.blf.subscribe_period = account.221.dtmf.type = account.221.dtmf.dtmf_payload = account.221.dtmf.info_type = account.221.100rel_enable = account.221.subscribe_register = account.221.subscribe_mwi = account.221.subscribe_mwi_expires = account.221.subscribe_mwi_to_vm = voice_mail.number.221 = %BWVOICE-PORTAL-NUMBER-221% account.221.display_mwi.enable = account.221.cid_source = account.221.cid_source_privacy = account.221.cid_source_ppi = account.221.session_timer.enable = account.221.session_timer.expires = account.221.session_timer.refresher = account.221.enable_user_equal_phone = account.221.srtp_encryption = account.221.ptime = account.221.shared_line = %BWSHAREDLINE-BINARY-221% account.221.register_mac = account.221.register_line = account.221.reg_fail_retry_interval = account.221.reg_failed_retry_min_time = account.221.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.221.conf_type =
account.221.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-221%
account.221.sip_server_type = account.221.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1012 OF 1142
########################################################################## ############# ##DECT V81 Add
account.221.register_expires_overlap = account.221.subscribe_expires_overlap = account.221.auto_dial_enable = account.221.auto_dial_num = account.221.cp_source = account.221.transfer_refer_to_contact_header.enable = #V80 Add account.221.custom_ua = account.221.callpark_enable = account.221.check_cseq.enable = account.221.check_to_tag.enable = account.221.hold_use_inactive = account.221.line_seize.expires = account.221.update_ack_while_dialing = account.221.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.221.always_fwd.enable =
account.221.always_fwd.target =
account.221.always_fwd.off_code =
account.221.always_fwd.on_code =
account.221.busy_fwd.enable =
account.221.busy_fwd.target =
account.221.busy_fwd.off_code =
account.221.busy_fwd.on_code =
account.221.timeout_fwd.enable =
account.221.timeout_fwd.target =
account.221.timeout_fwd.timeout =
account.221.timeout_fwd.off_code =
account.221.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.221.dnd.enable =
account.221.dnd.on_code =
account.221.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.221.reg.enable =
handset.221.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1013 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.221.xsi.user =%BWLOGIN-ID-221% account.221.xsi.password =%XSIPASSWORD-221% account.221.xsi.host =%XSP_ADDRESS% account.221.xsi.server_type = account.221.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.221.ldap.enable =
handset.221.ldap.name_filter=
handset.221.ldap.number_filter=
handset.221.ldap.host=
handset.221.ldap.port=
handset.221.ldap.base=
handset.221.ldap.user=
handset.221.ldap.password=
handset.221.ldap.max_hits=
handset.221.ldap.name_attr=
handset.221.ldap.numb_attr=
handset.221.ldap.display_name=
handset.221.ldap.version=
handset.221.ldap.call_in_lookup=
handset.221.ldap.ldap_sort=
handset.221.ldap.tls_mode=
handset.221.ldap.call_out_lookup=
handset.221.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account222 Settings
##
##########################################################################
#############
account.222.enable=%BWLINE-BINARY-222% account.222.label=%BWEXTENSION-222% account.222.display_name=%BWCLID-222% account.222.auth_name=%BWAUTHUSER-222% account.222.user_name=%BWLINEPORT-222% account.222.password=%BWAUTHPASSWORD-222%
#W80B ADD account.222.sip_server.template = account.222.media_transmit.enable =
account.222.alarm.template = account.222.alarm.server = account.222.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1014 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.222.sip_server.1.failback_mode =
account.222.sip_server.1.failback_timeout =
account.222.sip_server.1.register_on_enable =
account.222.sip_server.1.failback_subscribe.enable =
account.222.sip_server.1.invite_retry_counts =
account.222.sip_server.1.only_signal_with_registered =
account.222.sip_server.2.failback_mode = account.222.sip_server.2.failback_timeout = account.222.sip_server.2.register_on_enable = account.222.sip_server.2.failback_subscribe.enable = account.222.sip_server.2.invite_retry_counts = account.222.sip_server.2.only_signal_with_registered =
account.222.naptr_build = account.222.fallback.redundancy_type = account.222.fallback.timeout =
account.222.dns_cache_type = account.222.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.222.anonymous_call =
account.222.reject_anonymous_call =
account.222.send_anonymous_code =
account.222.anonymous_call_oncode =
account.222.anonymous_call_offcode =
account.222.send_anonymous_rejection_code =
account.222.anonymous_reject_oncode =
account.222.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.222.codec.g722.enable =
account.222.codec.g722.priority =
account.222.codec.g729.enable = account.222.codec.g729.priority =
account.222.codec.g726_16.enable = account.222.codec.g726_16.priority =
account.222.codec.g726_24.enable = account.222.codec.g726_24.priority =
account.222.codec.g726_32.enable = account.222.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1015 OF 1142
account.222.codec.g726_40.enable = account.222.codec.g726_40.priority =
account.222.codec.ilbc.enable = account.222.codec.ilbc.priority =
account.222.codec.pcmu.enable = account.222.codec.pcmu.priority =
account.222.codec.pcma.enable = account.222.codec.pcma.priority =
account.222.codec.opus.enable = account.222.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.222.nat.nat_traversal = account.222.nat.udp_update_enable = account.222.nat.udp_update_time = account.222.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.222.blf.subscribe_period = account.222.dtmf.type = account.222.dtmf.dtmf_payload = account.222.dtmf.info_type = account.222.100rel_enable = account.222.subscribe_register = account.222.subscribe_mwi = account.222.subscribe_mwi_expires = account.222.subscribe_mwi_to_vm = voice_mail.number.222 = %BWVOICE-PORTAL-NUMBER-222% account.222.display_mwi.enable = account.222.cid_source = account.222.cid_source_privacy = account.222.cid_source_ppi = account.222.session_timer.enable = account.222.session_timer.expires = account.222.session_timer.refresher = account.222.enable_user_equal_phone = account.222.srtp_encryption = account.222.ptime = account.222.shared_line = %BWSHAREDLINE-BINARY-222% account.222.register_mac = account.222.register_line = account.222.reg_fail_retry_interval = account.222.reg_failed_retry_min_time = account.222.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1016 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.222.conf_type =
account.222.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-222%
account.222.sip_server_type = account.222.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.222.register_expires_overlap = account.222.subscribe_expires_overlap = account.222.auto_dial_enable = account.222.auto_dial_num = account.222.cp_source = account.222.transfer_refer_to_contact_header.enable = #V80 Add account.222.custom_ua = account.222.callpark_enable = account.222.check_cseq.enable = account.222.check_to_tag.enable = account.222.hold_use_inactive = account.222.line_seize.expires = account.222.update_ack_while_dialing = account.222.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.222.always_fwd.enable =
account.222.always_fwd.target =
account.222.always_fwd.off_code =
account.222.always_fwd.on_code =
account.222.busy_fwd.enable =
account.222.busy_fwd.target =
account.222.busy_fwd.off_code =
account.222.busy_fwd.on_code =
account.222.timeout_fwd.enable =
account.222.timeout_fwd.target =
account.222.timeout_fwd.timeout =
account.222.timeout_fwd.off_code =
account.222.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1017 OF 1142
account.222.dnd.enable = account.222.dnd.on_code = account.222.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.222.reg.enable =
handset.222.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.222.xsi.user =%BWLOGIN-ID-222% account.222.xsi.password =%XSIPASSWORD-222% account.222.xsi.host =%XSP_ADDRESS% account.222.xsi.server_type = account.222.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.222.ldap.enable =
handset.222.ldap.name_filter=
handset.222.ldap.number_filter=
handset.222.ldap.host=
handset.222.ldap.port=
handset.222.ldap.base=
handset.222.ldap.user=
handset.222.ldap.password=
handset.222.ldap.max_hits=
handset.222.ldap.name_attr=
handset.222.ldap.numb_attr=
handset.222.ldap.display_name=
handset.222.ldap.version=
handset.222.ldap.call_in_lookup=
handset.222.ldap.ldap_sort=
handset.222.ldap.tls_mode=
handset.222.ldap.call_out_lookup=
handset.222.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account223 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1018 OF 1142
account.223.enable=%BWLINE-BINARY-223% account.223.label=%BWEXTENSION-223% account.223.display_name=%BWCLID-223% account.223.auth_name=%BWAUTHUSER-223% account.223.user_name=%BWLINEPORT-223% account.223.password=%BWAUTHPASSWORD-223%
#W80B ADD account.223.sip_server.template = account.223.media_transmit.enable =
account.223.alarm.template = account.223.alarm.server = account.223.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.223.sip_server.1.failback_mode =
account.223.sip_server.1.failback_timeout =
account.223.sip_server.1.register_on_enable =
account.223.sip_server.1.failback_subscribe.enable =
account.223.sip_server.1.invite_retry_counts =
account.223.sip_server.1.only_signal_with_registered =
account.223.sip_server.2.failback_mode = account.223.sip_server.2.failback_timeout = account.223.sip_server.2.register_on_enable = account.223.sip_server.2.failback_subscribe.enable = account.223.sip_server.2.invite_retry_counts = account.223.sip_server.2.only_signal_with_registered =
account.223.naptr_build = account.223.fallback.redundancy_type = account.223.fallback.timeout =
account.223.dns_cache_type = account.223.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.223.anonymous_call =
account.223.reject_anonymous_call =
account.223.send_anonymous_code =
account.223.anonymous_call_oncode =
account.223.anonymous_call_offcode =
account.223.send_anonymous_rejection_code =
account.223.anonymous_reject_oncode =
account.223.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1019 OF 1142
########################################################################## ############# account.223.codec.g722.enable = account.223.codec.g722.priority =
account.223.codec.g729.enable = account.223.codec.g729.priority =
account.223.codec.g726_16.enable = account.223.codec.g726_16.priority =
account.223.codec.g726_24.enable = account.223.codec.g726_24.priority =
account.223.codec.g726_32.enable = account.223.codec.g726_32.priority =
account.223.codec.g726_40.enable = account.223.codec.g726_40.priority =
account.223.codec.ilbc.enable = account.223.codec.ilbc.priority =
account.223.codec.pcmu.enable = account.223.codec.pcmu.priority =
account.223.codec.pcma.enable = account.223.codec.pcma.priority =
account.223.codec.opus.enable = account.223.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.223.nat.nat_traversal = account.223.nat.udp_update_enable = account.223.nat.udp_update_time = account.223.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.223.blf.subscribe_period = account.223.dtmf.type = account.223.dtmf.dtmf_payload = account.223.dtmf.info_type = account.223.100rel_enable = account.223.subscribe_register = account.223.subscribe_mwi = account.223.subscribe_mwi_expires = account.223.subscribe_mwi_to_vm = voice_mail.number.223 = %BWVOICE-PORTAL-NUMBER-223% account.223.display_mwi.enable = account.223.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1020 OF 1142
account.223.cid_source_privacy = account.223.cid_source_ppi = account.223.session_timer.enable = account.223.session_timer.expires = account.223.session_timer.refresher = account.223.enable_user_equal_phone = account.223.srtp_encryption = account.223.ptime = account.223.shared_line = %BWSHAREDLINE-BINARY-223% account.223.register_mac = account.223.register_line = account.223.reg_fail_retry_interval = account.223.reg_failed_retry_min_time = account.223.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.223.conf_type =
account.223.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-223%
account.223.sip_server_type = account.223.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.223.register_expires_overlap = account.223.subscribe_expires_overlap = account.223.auto_dial_enable = account.223.auto_dial_num = account.223.cp_source = account.223.transfer_refer_to_contact_header.enable = #V80 Add account.223.custom_ua = account.223.callpark_enable = account.223.check_cseq.enable = account.223.check_to_tag.enable = account.223.hold_use_inactive = account.223.line_seize.expires = account.223.update_ack_while_dialing = account.223.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.223.always_fwd.enable =
account.223.always_fwd.target =
account.223.always_fwd.off_code =
account.223.always_fwd.on_code =
account.223.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1021 OF 1142
account.223.busy_fwd.target = account.223.busy_fwd.off_code = account.223.busy_fwd.on_code = account.223.timeout_fwd.enable = account.223.timeout_fwd.target = account.223.timeout_fwd.timeout = account.223.timeout_fwd.off_code = account.223.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.223.dnd.enable =
account.223.dnd.on_code =
account.223.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.223.reg.enable =
handset.223.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.223.xsi.user =%BWLOGIN-ID-223% account.223.xsi.password =%XSIPASSWORD-223% account.223.xsi.host =%XSP_ADDRESS% account.223.xsi.server_type = account.223.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.223.ldap.enable =
handset.223.ldap.name_filter=
handset.223.ldap.number_filter=
handset.223.ldap.host=
handset.223.ldap.port=
handset.223.ldap.base=
handset.223.ldap.user=
handset.223.ldap.password=
handset.223.ldap.max_hits=
handset.223.ldap.name_attr=
handset.223.ldap.numb_attr=
handset.223.ldap.display_name=
handset.223.ldap.version=
handset.223.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1022 OF 1142
handset.223.ldap.ldap_sort= handset.223.ldap.tls_mode= handset.223.ldap.call_out_lookup= handset.223.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account224 Settings
##
##########################################################################
#############
account.224.enable=%BWLINE-BINARY-224% account.224.label=%BWEXTENSION-224% account.224.display_name=%BWCLID-224% account.224.auth_name=%BWAUTHUSER-224% account.224.user_name=%BWLINEPORT-224% account.224.password=%BWAUTHPASSWORD-224%
#W80B ADD account.224.sip_server.template = account.224.media_transmit.enable =
account.224.alarm.template = account.224.alarm.server = account.224.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.224.sip_server.1.failback_mode =
account.224.sip_server.1.failback_timeout =
account.224.sip_server.1.register_on_enable =
account.224.sip_server.1.failback_subscribe.enable =
account.224.sip_server.1.invite_retry_counts =
account.224.sip_server.1.only_signal_with_registered =
account.224.sip_server.2.failback_mode = account.224.sip_server.2.failback_timeout = account.224.sip_server.2.register_on_enable = account.224.sip_server.2.failback_subscribe.enable = account.224.sip_server.2.invite_retry_counts = account.224.sip_server.2.only_signal_with_registered =
account.224.naptr_build = account.224.fallback.redundancy_type = account.224.fallback.timeout =
account.224.dns_cache_type = account.224.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1023 OF 1142
account.224.anonymous_call = account.224.reject_anonymous_call = account.224.send_anonymous_code = account.224.anonymous_call_oncode = account.224.anonymous_call_offcode = account.224.send_anonymous_rejection_code = account.224.anonymous_reject_oncode = account.224.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.224.codec.g722.enable =
account.224.codec.g722.priority =
account.224.codec.g729.enable = account.224.codec.g729.priority =
account.224.codec.g726_16.enable = account.224.codec.g726_16.priority =
account.224.codec.g726_24.enable = account.224.codec.g726_24.priority =
account.224.codec.g726_32.enable = account.224.codec.g726_32.priority =
account.224.codec.g726_40.enable = account.224.codec.g726_40.priority =
account.224.codec.ilbc.enable = account.224.codec.ilbc.priority =
account.224.codec.pcmu.enable = account.224.codec.pcmu.priority =
account.224.codec.pcma.enable = account.224.codec.pcma.priority =
account.224.codec.opus.enable = account.224.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.224.nat.nat_traversal = account.224.nat.udp_update_enable = account.224.nat.udp_update_time = account.224.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1024 OF 1142
########################################################################## #############
account.224.blf.subscribe_period = account.224.dtmf.type = account.224.dtmf.dtmf_payload = account.224.dtmf.info_type = account.224.100rel_enable = account.224.subscribe_register = account.224.subscribe_mwi = account.224.subscribe_mwi_expires = account.224.subscribe_mwi_to_vm = voice_mail.number.224 = %BWVOICE-PORTAL-NUMBER-224% account.224.display_mwi.enable = account.224.cid_source = account.224.cid_source_privacy = account.224.cid_source_ppi = account.224.session_timer.enable = account.224.session_timer.expires = account.224.session_timer.refresher = account.224.enable_user_equal_phone = account.224.srtp_encryption = account.224.ptime = account.224.shared_line = %BWSHAREDLINE-BINARY-224% account.224.register_mac = account.224.register_line = account.224.reg_fail_retry_interval = account.224.reg_failed_retry_min_time = account.224.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.224.conf_type =
account.224.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-224%
account.224.sip_server_type = account.224.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.224.register_expires_overlap = account.224.subscribe_expires_overlap = account.224.auto_dial_enable = account.224.auto_dial_num = account.224.cp_source = account.224.transfer_refer_to_contact_header.enable = #V80 Add account.224.custom_ua = account.224.callpark_enable = account.224.check_cseq.enable = account.224.check_to_tag.enable = account.224.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1025 OF 1142
account.224.line_seize.expires = account.224.update_ack_while_dialing = account.224.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.224.always_fwd.enable =
account.224.always_fwd.target =
account.224.always_fwd.off_code =
account.224.always_fwd.on_code =
account.224.busy_fwd.enable =
account.224.busy_fwd.target =
account.224.busy_fwd.off_code =
account.224.busy_fwd.on_code =
account.224.timeout_fwd.enable =
account.224.timeout_fwd.target =
account.224.timeout_fwd.timeout =
account.224.timeout_fwd.off_code =
account.224.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.224.dnd.enable =
account.224.dnd.on_code =
account.224.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.224.reg.enable =
handset.224.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.224.xsi.user =%BWLOGIN-ID-224% account.224.xsi.password =%XSIPASSWORD-224% account.224.xsi.host =%XSP_ADDRESS% account.224.xsi.server_type = account.224.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1026 OF 1142
########################################################################## ############# handset.224.ldap.enable = handset.224.ldap.name_filter= handset.224.ldap.number_filter= handset.224.ldap.host= handset.224.ldap.port= handset.224.ldap.base= handset.224.ldap.user= handset.224.ldap.password= handset.224.ldap.max_hits= handset.224.ldap.name_attr= handset.224.ldap.numb_attr= handset.224.ldap.display_name= handset.224.ldap.version= handset.224.ldap.call_in_lookup= handset.224.ldap.ldap_sort= handset.224.ldap.tls_mode= handset.224.ldap.call_out_lookup= handset.224.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account225 Settings
##
##########################################################################
#############
account.225.enable=%BWLINE-BINARY-225% account.225.label=%BWEXTENSION-225% account.225.display_name=%BWCLID-225% account.225.auth_name=%BWAUTHUSER-225% account.225.user_name=%BWLINEPORT-225% account.225.password=%BWAUTHPASSWORD-225%
#W80B ADD account.225.sip_server.template = account.225.media_transmit.enable =
account.225.alarm.template = account.225.alarm.server = account.225.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.225.sip_server.1.failback_mode =
account.225.sip_server.1.failback_timeout =
account.225.sip_server.1.register_on_enable =
account.225.sip_server.1.failback_subscribe.enable =
account.225.sip_server.1.invite_retry_counts =
account.225.sip_server.1.only_signal_with_registered =
account.225.sip_server.2.failback_mode = account.225.sip_server.2.failback_timeout = account.225.sip_server.2.register_on_enable = account.225.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1027 OF 1142
account.225.sip_server.2.invite_retry_counts = account.225.sip_server.2.only_signal_with_registered =
account.225.naptr_build = account.225.fallback.redundancy_type = account.225.fallback.timeout =
account.225.dns_cache_type = account.225.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.225.anonymous_call =
account.225.reject_anonymous_call =
account.225.send_anonymous_code =
account.225.anonymous_call_oncode =
account.225.anonymous_call_offcode =
account.225.send_anonymous_rejection_code =
account.225.anonymous_reject_oncode =
account.225.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.225.codec.g722.enable =
account.225.codec.g722.priority =
account.225.codec.g729.enable = account.225.codec.g729.priority =
account.225.codec.g726_16.enable = account.225.codec.g726_16.priority =
account.225.codec.g726_24.enable = account.225.codec.g726_24.priority =
account.225.codec.g726_32.enable = account.225.codec.g726_32.priority =
account.225.codec.g726_40.enable = account.225.codec.g726_40.priority =
account.225.codec.ilbc.enable = account.225.codec.ilbc.priority =
account.225.codec.pcmu.enable = account.225.codec.pcmu.priority =
account.225.codec.pcma.enable = account.225.codec.pcma.priority =
account.225.codec.opus.enable = account.225.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1028 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.225.nat.nat_traversal = account.225.nat.udp_update_enable = account.225.nat.udp_update_time = account.225.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.225.blf.subscribe_period = account.225.dtmf.type = account.225.dtmf.dtmf_payload = account.225.dtmf.info_type = account.225.100rel_enable = account.225.subscribe_register = account.225.subscribe_mwi = account.225.subscribe_mwi_expires = account.225.subscribe_mwi_to_vm = voice_mail.number.225 = %BWVOICE-PORTAL-NUMBER-225% account.225.display_mwi.enable = account.225.cid_source = account.225.cid_source_privacy = account.225.cid_source_ppi = account.225.session_timer.enable = account.225.session_timer.expires = account.225.session_timer.refresher = account.225.enable_user_equal_phone = account.225.srtp_encryption = account.225.ptime = account.225.shared_line = %BWSHAREDLINE-BINARY-225% account.225.register_mac = account.225.register_line = account.225.reg_fail_retry_interval = account.225.reg_failed_retry_min_time = account.225.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.225.conf_type =
account.225.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-225%
account.225.sip_server_type = account.225.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1029 OF 1142
########################################################################## ############# ##DECT V81 Add
account.225.register_expires_overlap = account.225.subscribe_expires_overlap = account.225.auto_dial_enable = account.225.auto_dial_num = account.225.cp_source = account.225.transfer_refer_to_contact_header.enable = #V80 Add account.225.custom_ua = account.225.callpark_enable = account.225.check_cseq.enable = account.225.check_to_tag.enable = account.225.hold_use_inactive = account.225.line_seize.expires = account.225.update_ack_while_dialing = account.225.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.225.always_fwd.enable =
account.225.always_fwd.target =
account.225.always_fwd.off_code =
account.225.always_fwd.on_code =
account.225.busy_fwd.enable =
account.225.busy_fwd.target =
account.225.busy_fwd.off_code =
account.225.busy_fwd.on_code =
account.225.timeout_fwd.enable =
account.225.timeout_fwd.target =
account.225.timeout_fwd.timeout =
account.225.timeout_fwd.off_code =
account.225.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.225.dnd.enable =
account.225.dnd.on_code =
account.225.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.225.reg.enable =
handset.225.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1030 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.225.xsi.user =%BWLOGIN-ID-225% account.225.xsi.password =%XSIPASSWORD-225% account.225.xsi.host =%XSP_ADDRESS% account.225.xsi.server_type = account.225.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.225.ldap.enable =
handset.225.ldap.name_filter=
handset.225.ldap.number_filter=
handset.225.ldap.host=
handset.225.ldap.port=
handset.225.ldap.base=
handset.225.ldap.user=
handset.225.ldap.password=
handset.225.ldap.max_hits=
handset.225.ldap.name_attr=
handset.225.ldap.numb_attr=
handset.225.ldap.display_name=
handset.225.ldap.version=
handset.225.ldap.call_in_lookup=
handset.225.ldap.ldap_sort=
handset.225.ldap.tls_mode=
handset.225.ldap.call_out_lookup=
handset.225.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account226 Settings
##
##########################################################################
#############
account.226.enable=%BWLINE-BINARY-226% account.226.label=%BWEXTENSION-226% account.226.display_name=%BWCLID-226% account.226.auth_name=%BWAUTHUSER-226% account.226.user_name=%BWLINEPORT-226% account.226.password=%BWAUTHPASSWORD-226%
#W80B ADD account.226.sip_server.template = account.226.media_transmit.enable =
account.226.alarm.template = account.226.alarm.server = account.226.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1031 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.226.sip_server.1.failback_mode =
account.226.sip_server.1.failback_timeout =
account.226.sip_server.1.register_on_enable =
account.226.sip_server.1.failback_subscribe.enable =
account.226.sip_server.1.invite_retry_counts =
account.226.sip_server.1.only_signal_with_registered =
account.226.sip_server.2.failback_mode = account.226.sip_server.2.failback_timeout = account.226.sip_server.2.register_on_enable = account.226.sip_server.2.failback_subscribe.enable = account.226.sip_server.2.invite_retry_counts = account.226.sip_server.2.only_signal_with_registered =
account.226.naptr_build = account.226.fallback.redundancy_type = account.226.fallback.timeout =
account.226.dns_cache_type = account.226.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.226.anonymous_call =
account.226.reject_anonymous_call =
account.226.send_anonymous_code =
account.226.anonymous_call_oncode =
account.226.anonymous_call_offcode =
account.226.send_anonymous_rejection_code =
account.226.anonymous_reject_oncode =
account.226.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.226.codec.g722.enable =
account.226.codec.g722.priority =
account.226.codec.g729.enable = account.226.codec.g729.priority =
account.226.codec.g726_16.enable = account.226.codec.g726_16.priority =
account.226.codec.g726_24.enable = account.226.codec.g726_24.priority =
account.226.codec.g726_32.enable = account.226.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1032 OF 1142
account.226.codec.g726_40.enable = account.226.codec.g726_40.priority =
account.226.codec.ilbc.enable = account.226.codec.ilbc.priority =
account.226.codec.pcmu.enable = account.226.codec.pcmu.priority =
account.226.codec.pcma.enable = account.226.codec.pcma.priority =
account.226.codec.opus.enable = account.226.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.226.nat.nat_traversal = account.226.nat.udp_update_enable = account.226.nat.udp_update_time = account.226.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.226.blf.subscribe_period = account.226.dtmf.type = account.226.dtmf.dtmf_payload = account.226.dtmf.info_type = account.226.100rel_enable = account.226.subscribe_register = account.226.subscribe_mwi = account.226.subscribe_mwi_expires = account.226.subscribe_mwi_to_vm = voice_mail.number.226 = %BWVOICE-PORTAL-NUMBER-226% account.226.display_mwi.enable = account.226.cid_source = account.226.cid_source_privacy = account.226.cid_source_ppi = account.226.session_timer.enable = account.226.session_timer.expires = account.226.session_timer.refresher = account.226.enable_user_equal_phone = account.226.srtp_encryption = account.226.ptime = account.226.shared_line = %BWSHAREDLINE-BINARY-226% account.226.register_mac = account.226.register_line = account.226.reg_fail_retry_interval = account.226.reg_failed_retry_min_time = account.226.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1033 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.226.conf_type =
account.226.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-226%
account.226.sip_server_type = account.226.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.226.register_expires_overlap = account.226.subscribe_expires_overlap = account.226.auto_dial_enable = account.226.auto_dial_num = account.226.cp_source = account.226.transfer_refer_to_contact_header.enable = #V80 Add account.226.custom_ua = account.226.callpark_enable = account.226.check_cseq.enable = account.226.check_to_tag.enable = account.226.hold_use_inactive = account.226.line_seize.expires = account.226.update_ack_while_dialing = account.226.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.226.always_fwd.enable =
account.226.always_fwd.target =
account.226.always_fwd.off_code =
account.226.always_fwd.on_code =
account.226.busy_fwd.enable =
account.226.busy_fwd.target =
account.226.busy_fwd.off_code =
account.226.busy_fwd.on_code =
account.226.timeout_fwd.enable =
account.226.timeout_fwd.target =
account.226.timeout_fwd.timeout =
account.226.timeout_fwd.off_code =
account.226.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1034 OF 1142
account.226.dnd.enable = account.226.dnd.on_code = account.226.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.226.reg.enable =
handset.226.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.226.xsi.user =%BWLOGIN-ID-226% account.226.xsi.password =%XSIPASSWORD-226% account.226.xsi.host =%XSP_ADDRESS% account.226.xsi.server_type = account.226.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.226.ldap.enable =
handset.226.ldap.name_filter=
handset.226.ldap.number_filter=
handset.226.ldap.host=
handset.226.ldap.port=
handset.226.ldap.base=
handset.226.ldap.user=
handset.226.ldap.password=
handset.226.ldap.max_hits=
handset.226.ldap.name_attr=
handset.226.ldap.numb_attr=
handset.226.ldap.display_name=
handset.226.ldap.version=
handset.226.ldap.call_in_lookup=
handset.226.ldap.ldap_sort=
handset.226.ldap.tls_mode=
handset.226.ldap.call_out_lookup=
handset.226.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account227 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1035 OF 1142
account.227.enable=%BWLINE-BINARY-227% account.227.label=%BWEXTENSION-227% account.227.display_name=%BWCLID-227% account.227.auth_name=%BWAUTHUSER-227% account.227.user_name=%BWLINEPORT-227% account.227.password=%BWAUTHPASSWORD-227%
#W80B ADD account.227.sip_server.template = account.227.media_transmit.enable =
account.227.alarm.template = account.227.alarm.server = account.227.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.227.sip_server.1.failback_mode =
account.227.sip_server.1.failback_timeout =
account.227.sip_server.1.register_on_enable =
account.227.sip_server.1.failback_subscribe.enable =
account.227.sip_server.1.invite_retry_counts =
account.227.sip_server.1.only_signal_with_registered =
account.227.sip_server.2.failback_mode = account.227.sip_server.2.failback_timeout = account.227.sip_server.2.register_on_enable = account.227.sip_server.2.failback_subscribe.enable = account.227.sip_server.2.invite_retry_counts = account.227.sip_server.2.only_signal_with_registered =
account.227.naptr_build = account.227.fallback.redundancy_type = account.227.fallback.timeout =
account.227.dns_cache_type = account.227.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.227.anonymous_call =
account.227.reject_anonymous_call =
account.227.send_anonymous_code =
account.227.anonymous_call_oncode =
account.227.anonymous_call_offcode =
account.227.send_anonymous_rejection_code =
account.227.anonymous_reject_oncode =
account.227.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1036 OF 1142
########################################################################## ############# account.227.codec.g722.enable = account.227.codec.g722.priority =
account.227.codec.g729.enable = account.227.codec.g729.priority =
account.227.codec.g726_16.enable = account.227.codec.g726_16.priority =
account.227.codec.g726_24.enable = account.227.codec.g726_24.priority =
account.227.codec.g726_32.enable = account.227.codec.g726_32.priority =
account.227.codec.g726_40.enable = account.227.codec.g726_40.priority =
account.227.codec.ilbc.enable = account.227.codec.ilbc.priority =
account.227.codec.pcmu.enable = account.227.codec.pcmu.priority =
account.227.codec.pcma.enable = account.227.codec.pcma.priority =
account.227.codec.opus.enable = account.227.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.227.nat.nat_traversal = account.227.nat.udp_update_enable = account.227.nat.udp_update_time = account.227.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.227.blf.subscribe_period = account.227.dtmf.type = account.227.dtmf.dtmf_payload = account.227.dtmf.info_type = account.227.100rel_enable = account.227.subscribe_register = account.227.subscribe_mwi = account.227.subscribe_mwi_expires = account.227.subscribe_mwi_to_vm = voice_mail.number.227 = %BWVOICE-PORTAL-NUMBER-227% account.227.display_mwi.enable = account.227.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1037 OF 1142
account.227.cid_source_privacy = account.227.cid_source_ppi = account.227.session_timer.enable = account.227.session_timer.expires = account.227.session_timer.refresher = account.227.enable_user_equal_phone = account.227.srtp_encryption = account.227.ptime = account.227.shared_line = %BWSHAREDLINE-BINARY-227% account.227.register_mac = account.227.register_line = account.227.reg_fail_retry_interval = account.227.reg_failed_retry_min_time = account.227.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.227.conf_type =
account.227.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-227%
account.227.sip_server_type = account.227.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.227.register_expires_overlap = account.227.subscribe_expires_overlap = account.227.auto_dial_enable = account.227.auto_dial_num = account.227.cp_source = account.227.transfer_refer_to_contact_header.enable = #V80 Add account.227.custom_ua = account.227.callpark_enable = account.227.check_cseq.enable = account.227.check_to_tag.enable = account.227.hold_use_inactive = account.227.line_seize.expires = account.227.update_ack_while_dialing = account.227.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.227.always_fwd.enable =
account.227.always_fwd.target =
account.227.always_fwd.off_code =
account.227.always_fwd.on_code =
account.227.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1038 OF 1142
account.227.busy_fwd.target = account.227.busy_fwd.off_code = account.227.busy_fwd.on_code = account.227.timeout_fwd.enable = account.227.timeout_fwd.target = account.227.timeout_fwd.timeout = account.227.timeout_fwd.off_code = account.227.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.227.dnd.enable =
account.227.dnd.on_code =
account.227.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.227.reg.enable =
handset.227.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.227.xsi.user =%BWLOGIN-ID-227% account.227.xsi.password =%XSIPASSWORD-227% account.227.xsi.host =%XSP_ADDRESS% account.227.xsi.server_type = account.227.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.227.ldap.enable =
handset.227.ldap.name_filter=
handset.227.ldap.number_filter=
handset.227.ldap.host=
handset.227.ldap.port=
handset.227.ldap.base=
handset.227.ldap.user=
handset.227.ldap.password=
handset.227.ldap.max_hits=
handset.227.ldap.name_attr=
handset.227.ldap.numb_attr=
handset.227.ldap.display_name=
handset.227.ldap.version=
handset.227.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1039 OF 1142
handset.227.ldap.ldap_sort= handset.227.ldap.tls_mode= handset.227.ldap.call_out_lookup= handset.227.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account228 Settings
##
##########################################################################
#############
account.228.enable=%BWLINE-BINARY-228% account.228.label=%BWEXTENSION-228% account.228.display_name=%BWCLID-228% account.228.auth_name=%BWAUTHUSER-228% account.228.user_name=%BWLINEPORT-228% account.228.password=%BWAUTHPASSWORD-228%
#W80B ADD account.228.sip_server.template = account.228.media_transmit.enable =
account.228.alarm.template = account.228.alarm.server = account.228.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.228.sip_server.1.failback_mode =
account.228.sip_server.1.failback_timeout =
account.228.sip_server.1.register_on_enable =
account.228.sip_server.1.failback_subscribe.enable =
account.228.sip_server.1.invite_retry_counts =
account.228.sip_server.1.only_signal_with_registered =
account.228.sip_server.2.failback_mode = account.228.sip_server.2.failback_timeout = account.228.sip_server.2.register_on_enable = account.228.sip_server.2.failback_subscribe.enable = account.228.sip_server.2.invite_retry_counts = account.228.sip_server.2.only_signal_with_registered =
account.228.naptr_build = account.228.fallback.redundancy_type = account.228.fallback.timeout =
account.228.dns_cache_type = account.228.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1040 OF 1142
account.228.anonymous_call = account.228.reject_anonymous_call = account.228.send_anonymous_code = account.228.anonymous_call_oncode = account.228.anonymous_call_offcode = account.228.send_anonymous_rejection_code = account.228.anonymous_reject_oncode = account.228.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.228.codec.g722.enable =
account.228.codec.g722.priority =
account.228.codec.g729.enable = account.228.codec.g729.priority =
account.228.codec.g726_16.enable = account.228.codec.g726_16.priority =
account.228.codec.g726_24.enable = account.228.codec.g726_24.priority =
account.228.codec.g726_32.enable = account.228.codec.g726_32.priority =
account.228.codec.g726_40.enable = account.228.codec.g726_40.priority =
account.228.codec.ilbc.enable = account.228.codec.ilbc.priority =
account.228.codec.pcmu.enable = account.228.codec.pcmu.priority =
account.228.codec.pcma.enable = account.228.codec.pcma.priority =
account.228.codec.opus.enable = account.228.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.228.nat.nat_traversal = account.228.nat.udp_update_enable = account.228.nat.udp_update_time = account.228.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1041 OF 1142
########################################################################## #############
account.228.blf.subscribe_period = account.228.dtmf.type = account.228.dtmf.dtmf_payload = account.228.dtmf.info_type = account.228.100rel_enable = account.228.subscribe_register = account.228.subscribe_mwi = account.228.subscribe_mwi_expires = account.228.subscribe_mwi_to_vm = voice_mail.number.228 = %BWVOICE-PORTAL-NUMBER-228% account.228.display_mwi.enable = account.228.cid_source = account.228.cid_source_privacy = account.228.cid_source_ppi = account.228.session_timer.enable = account.228.session_timer.expires = account.228.session_timer.refresher = account.228.enable_user_equal_phone = account.228.srtp_encryption = account.228.ptime = account.228.shared_line = %BWSHAREDLINE-BINARY-228% account.228.register_mac = account.228.register_line = account.228.reg_fail_retry_interval = account.228.reg_failed_retry_min_time = account.228.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.228.conf_type =
account.228.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-228%
account.228.sip_server_type = account.228.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.228.register_expires_overlap = account.228.subscribe_expires_overlap = account.228.auto_dial_enable = account.228.auto_dial_num = account.228.cp_source = account.228.transfer_refer_to_contact_header.enable = #V80 Add account.228.custom_ua = account.228.callpark_enable = account.228.check_cseq.enable = account.228.check_to_tag.enable = account.228.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1042 OF 1142
account.228.line_seize.expires = account.228.update_ack_while_dialing = account.228.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.228.always_fwd.enable =
account.228.always_fwd.target =
account.228.always_fwd.off_code =
account.228.always_fwd.on_code =
account.228.busy_fwd.enable =
account.228.busy_fwd.target =
account.228.busy_fwd.off_code =
account.228.busy_fwd.on_code =
account.228.timeout_fwd.enable =
account.228.timeout_fwd.target =
account.228.timeout_fwd.timeout =
account.228.timeout_fwd.off_code =
account.228.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.228.dnd.enable =
account.228.dnd.on_code =
account.228.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.228.reg.enable =
handset.228.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.228.xsi.user =%BWLOGIN-ID-228% account.228.xsi.password =%XSIPASSWORD-228% account.228.xsi.host =%XSP_ADDRESS% account.228.xsi.server_type = account.228.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1043 OF 1142
########################################################################## ############# handset.228.ldap.enable = handset.228.ldap.name_filter= handset.228.ldap.number_filter= handset.228.ldap.host= handset.228.ldap.port= handset.228.ldap.base= handset.228.ldap.user= handset.228.ldap.password= handset.228.ldap.max_hits= handset.228.ldap.name_attr= handset.228.ldap.numb_attr= handset.228.ldap.display_name= handset.228.ldap.version= handset.228.ldap.call_in_lookup= handset.228.ldap.ldap_sort= handset.228.ldap.tls_mode= handset.228.ldap.call_out_lookup= handset.228.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account229 Settings
##
##########################################################################
#############
account.229.enable=%BWLINE-BINARY-229% account.229.label=%BWEXTENSION-229% account.229.display_name=%BWCLID-229% account.229.auth_name=%BWAUTHUSER-229% account.229.user_name=%BWLINEPORT-229% account.229.password=%BWAUTHPASSWORD-229%
#W80B ADD account.229.sip_server.template = account.229.media_transmit.enable =
account.229.alarm.template = account.229.alarm.server = account.229.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.229.sip_server.1.failback_mode =
account.229.sip_server.1.failback_timeout =
account.229.sip_server.1.register_on_enable =
account.229.sip_server.1.failback_subscribe.enable =
account.229.sip_server.1.invite_retry_counts =
account.229.sip_server.1.only_signal_with_registered =
account.229.sip_server.2.failback_mode = account.229.sip_server.2.failback_timeout = account.229.sip_server.2.register_on_enable = account.229.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1044 OF 1142
account.229.sip_server.2.invite_retry_counts = account.229.sip_server.2.only_signal_with_registered =
account.229.naptr_build = account.229.fallback.redundancy_type = account.229.fallback.timeout =
account.229.dns_cache_type = account.229.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.229.anonymous_call =
account.229.reject_anonymous_call =
account.229.send_anonymous_code =
account.229.anonymous_call_oncode =
account.229.anonymous_call_offcode =
account.229.send_anonymous_rejection_code =
account.229.anonymous_reject_oncode =
account.229.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.229.codec.g722.enable =
account.229.codec.g722.priority =
account.229.codec.g729.enable = account.229.codec.g729.priority =
account.229.codec.g726_16.enable = account.229.codec.g726_16.priority =
account.229.codec.g726_24.enable = account.229.codec.g726_24.priority =
account.229.codec.g726_32.enable = account.229.codec.g726_32.priority =
account.229.codec.g726_40.enable = account.229.codec.g726_40.priority =
account.229.codec.ilbc.enable = account.229.codec.ilbc.priority =
account.229.codec.pcmu.enable = account.229.codec.pcmu.priority =
account.229.codec.pcma.enable = account.229.codec.pcma.priority =
account.229.codec.opus.enable = account.229.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1045 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.229.nat.nat_traversal = account.229.nat.udp_update_enable = account.229.nat.udp_update_time = account.229.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.229.blf.subscribe_period = account.229.dtmf.type = account.229.dtmf.dtmf_payload = account.229.dtmf.info_type = account.229.100rel_enable = account.229.subscribe_register = account.229.subscribe_mwi = account.229.subscribe_mwi_expires = account.229.subscribe_mwi_to_vm = voice_mail.number.229 = %BWVOICE-PORTAL-NUMBER-229% account.229.display_mwi.enable = account.229.cid_source = account.229.cid_source_privacy = account.229.cid_source_ppi = account.229.session_timer.enable = account.229.session_timer.expires = account.229.session_timer.refresher = account.229.enable_user_equal_phone = account.229.srtp_encryption = account.229.ptime = account.229.shared_line = %BWSHAREDLINE-BINARY-229% account.229.register_mac = account.229.register_line = account.229.reg_fail_retry_interval = account.229.reg_failed_retry_min_time = account.229.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.229.conf_type =
account.229.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-229%
account.229.sip_server_type = account.229.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1046 OF 1142
########################################################################## ############# ##DECT V81 Add
account.229.register_expires_overlap = account.229.subscribe_expires_overlap = account.229.auto_dial_enable = account.229.auto_dial_num = account.229.cp_source = account.229.transfer_refer_to_contact_header.enable = #V80 Add account.229.custom_ua = account.229.callpark_enable = account.229.check_cseq.enable = account.229.check_to_tag.enable = account.229.hold_use_inactive = account.229.line_seize.expires = account.229.update_ack_while_dialing = account.229.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.229.always_fwd.enable =
account.229.always_fwd.target =
account.229.always_fwd.off_code =
account.229.always_fwd.on_code =
account.229.busy_fwd.enable =
account.229.busy_fwd.target =
account.229.busy_fwd.off_code =
account.229.busy_fwd.on_code =
account.229.timeout_fwd.enable =
account.229.timeout_fwd.target =
account.229.timeout_fwd.timeout =
account.229.timeout_fwd.off_code =
account.229.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.229.dnd.enable =
account.229.dnd.on_code =
account.229.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.229.reg.enable =
handset.229.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1047 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.229.xsi.user =%BWLOGIN-ID-229% account.229.xsi.password =%XSIPASSWORD-229% account.229.xsi.host =%XSP_ADDRESS% account.229.xsi.server_type = account.229.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.229.ldap.enable =
handset.229.ldap.name_filter=
handset.229.ldap.number_filter=
handset.229.ldap.host=
handset.229.ldap.port=
handset.229.ldap.base=
handset.229.ldap.user=
handset.229.ldap.password=
handset.229.ldap.max_hits=
handset.229.ldap.name_attr=
handset.229.ldap.numb_attr=
handset.229.ldap.display_name=
handset.229.ldap.version=
handset.229.ldap.call_in_lookup=
handset.229.ldap.ldap_sort=
handset.229.ldap.tls_mode=
handset.229.ldap.call_out_lookup=
handset.229.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account230 Settings
##
##########################################################################
#############
account.230.enable=%BWLINE-BINARY-230% account.230.label=%BWEXTENSION-230% account.230.display_name=%BWCLID-230% account.230.auth_name=%BWAUTHUSER-230% account.230.user_name=%BWLINEPORT-230% account.230.password=%BWAUTHPASSWORD-230%
#W80B ADD account.230.sip_server.template = account.230.media_transmit.enable =
account.230.alarm.template = account.230.alarm.server = account.230.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1048 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.230.sip_server.1.failback_mode =
account.230.sip_server.1.failback_timeout =
account.230.sip_server.1.register_on_enable =
account.230.sip_server.1.failback_subscribe.enable =
account.230.sip_server.1.invite_retry_counts =
account.230.sip_server.1.only_signal_with_registered =
account.230.sip_server.2.failback_mode = account.230.sip_server.2.failback_timeout = account.230.sip_server.2.register_on_enable = account.230.sip_server.2.failback_subscribe.enable = account.230.sip_server.2.invite_retry_counts = account.230.sip_server.2.only_signal_with_registered =
account.230.naptr_build = account.230.fallback.redundancy_type = account.230.fallback.timeout =
account.230.dns_cache_type = account.230.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.230.anonymous_call =
account.230.reject_anonymous_call =
account.230.send_anonymous_code =
account.230.anonymous_call_oncode =
account.230.anonymous_call_offcode =
account.230.send_anonymous_rejection_code =
account.230.anonymous_reject_oncode =
account.230.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.230.codec.g722.enable =
account.230.codec.g722.priority =
account.230.codec.g729.enable = account.230.codec.g729.priority =
account.230.codec.g726_16.enable = account.230.codec.g726_16.priority =
account.230.codec.g726_24.enable = account.230.codec.g726_24.priority =
account.230.codec.g726_32.enable = account.230.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1049 OF 1142
account.230.codec.g726_40.enable = account.230.codec.g726_40.priority =
account.230.codec.ilbc.enable = account.230.codec.ilbc.priority =
account.230.codec.pcmu.enable = account.230.codec.pcmu.priority =
account.230.codec.pcma.enable = account.230.codec.pcma.priority =
account.230.codec.opus.enable = account.230.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.230.nat.nat_traversal = account.230.nat.udp_update_enable = account.230.nat.udp_update_time = account.230.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.230.blf.subscribe_period = account.230.dtmf.type = account.230.dtmf.dtmf_payload = account.230.dtmf.info_type = account.230.100rel_enable = account.230.subscribe_register = account.230.subscribe_mwi = account.230.subscribe_mwi_expires = account.230.subscribe_mwi_to_vm = voice_mail.number.230 = %BWVOICE-PORTAL-NUMBER-230% account.230.display_mwi.enable = account.230.cid_source = account.230.cid_source_privacy = account.230.cid_source_ppi = account.230.session_timer.enable = account.230.session_timer.expires = account.230.session_timer.refresher = account.230.enable_user_equal_phone = account.230.srtp_encryption = account.230.ptime = account.230.shared_line = %BWSHAREDLINE-BINARY-230% account.230.register_mac = account.230.register_line = account.230.reg_fail_retry_interval = account.230.reg_failed_retry_min_time = account.230.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1050 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.230.conf_type =
account.230.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-230%
account.230.sip_server_type = account.230.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.230.register_expires_overlap = account.230.subscribe_expires_overlap = account.230.auto_dial_enable = account.230.auto_dial_num = account.230.cp_source = account.230.transfer_refer_to_contact_header.enable = #V80 Add account.230.custom_ua = account.230.callpark_enable = account.230.check_cseq.enable = account.230.check_to_tag.enable = account.230.hold_use_inactive = account.230.line_seize.expires = account.230.update_ack_while_dialing = account.230.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.230.always_fwd.enable =
account.230.always_fwd.target =
account.230.always_fwd.off_code =
account.230.always_fwd.on_code =
account.230.busy_fwd.enable =
account.230.busy_fwd.target =
account.230.busy_fwd.off_code =
account.230.busy_fwd.on_code =
account.230.timeout_fwd.enable =
account.230.timeout_fwd.target =
account.230.timeout_fwd.timeout =
account.230.timeout_fwd.off_code =
account.230.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1051 OF 1142
account.230.dnd.enable = account.230.dnd.on_code = account.230.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.230.reg.enable =
handset.230.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.230.xsi.user =%BWLOGIN-ID-230% account.230.xsi.password =%XSIPASSWORD-230% account.230.xsi.host =%XSP_ADDRESS% account.230.xsi.server_type = account.230.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.230.ldap.enable =
handset.230.ldap.name_filter=
handset.230.ldap.number_filter=
handset.230.ldap.host=
handset.230.ldap.port=
handset.230.ldap.base=
handset.230.ldap.user=
handset.230.ldap.password=
handset.230.ldap.max_hits=
handset.230.ldap.name_attr=
handset.230.ldap.numb_attr=
handset.230.ldap.display_name=
handset.230.ldap.version=
handset.230.ldap.call_in_lookup=
handset.230.ldap.ldap_sort=
handset.230.ldap.tls_mode=
handset.230.ldap.call_out_lookup=
handset.230.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account231 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1052 OF 1142
account.231.enable=%BWLINE-BINARY-231% account.231.label=%BWEXTENSION-231% account.231.display_name=%BWCLID-231% account.231.auth_name=%BWAUTHUSER-231% account.231.user_name=%BWLINEPORT-231% account.231.password=%BWAUTHPASSWORD-231%
#W80B ADD account.231.sip_server.template = account.231.media_transmit.enable =
account.231.alarm.template = account.231.alarm.server = account.231.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.231.sip_server.1.failback_mode =
account.231.sip_server.1.failback_timeout =
account.231.sip_server.1.register_on_enable =
account.231.sip_server.1.failback_subscribe.enable =
account.231.sip_server.1.invite_retry_counts =
account.231.sip_server.1.only_signal_with_registered =
account.231.sip_server.2.failback_mode = account.231.sip_server.2.failback_timeout = account.231.sip_server.2.register_on_enable = account.231.sip_server.2.failback_subscribe.enable = account.231.sip_server.2.invite_retry_counts = account.231.sip_server.2.only_signal_with_registered =
account.231.naptr_build = account.231.fallback.redundancy_type = account.231.fallback.timeout =
account.231.dns_cache_type = account.231.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.231.anonymous_call =
account.231.reject_anonymous_call =
account.231.send_anonymous_code =
account.231.anonymous_call_oncode =
account.231.anonymous_call_offcode =
account.231.send_anonymous_rejection_code =
account.231.anonymous_reject_oncode =
account.231.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1053 OF 1142
########################################################################## ############# account.231.codec.g722.enable = account.231.codec.g722.priority =
account.231.codec.g729.enable = account.231.codec.g729.priority =
account.231.codec.g726_16.enable = account.231.codec.g726_16.priority =
account.231.codec.g726_24.enable = account.231.codec.g726_24.priority =
account.231.codec.g726_32.enable = account.231.codec.g726_32.priority =
account.231.codec.g726_40.enable = account.231.codec.g726_40.priority =
account.231.codec.ilbc.enable = account.231.codec.ilbc.priority =
account.231.codec.pcmu.enable = account.231.codec.pcmu.priority =
account.231.codec.pcma.enable = account.231.codec.pcma.priority =
account.231.codec.opus.enable = account.231.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.231.nat.nat_traversal = account.231.nat.udp_update_enable = account.231.nat.udp_update_time = account.231.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.231.blf.subscribe_period = account.231.dtmf.type = account.231.dtmf.dtmf_payload = account.231.dtmf.info_type = account.231.100rel_enable = account.231.subscribe_register = account.231.subscribe_mwi = account.231.subscribe_mwi_expires = account.231.subscribe_mwi_to_vm = voice_mail.number.231 = %BWVOICE-PORTAL-NUMBER-231% account.231.display_mwi.enable = account.231.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1054 OF 1142
account.231.cid_source_privacy = account.231.cid_source_ppi = account.231.session_timer.enable = account.231.session_timer.expires = account.231.session_timer.refresher = account.231.enable_user_equal_phone = account.231.srtp_encryption = account.231.ptime = account.231.shared_line = %BWSHAREDLINE-BINARY-231% account.231.register_mac = account.231.register_line = account.231.reg_fail_retry_interval = account.231.reg_failed_retry_min_time = account.231.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.231.conf_type =
account.231.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-231%
account.231.sip_server_type = account.231.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.231.register_expires_overlap = account.231.subscribe_expires_overlap = account.231.auto_dial_enable = account.231.auto_dial_num = account.231.cp_source = account.231.transfer_refer_to_contact_header.enable = #V80 Add account.231.custom_ua = account.231.callpark_enable = account.231.check_cseq.enable = account.231.check_to_tag.enable = account.231.hold_use_inactive = account.231.line_seize.expires = account.231.update_ack_while_dialing = account.231.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.231.always_fwd.enable =
account.231.always_fwd.target =
account.231.always_fwd.off_code =
account.231.always_fwd.on_code =
account.231.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1055 OF 1142
account.231.busy_fwd.target = account.231.busy_fwd.off_code = account.231.busy_fwd.on_code = account.231.timeout_fwd.enable = account.231.timeout_fwd.target = account.231.timeout_fwd.timeout = account.231.timeout_fwd.off_code = account.231.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.231.dnd.enable =
account.231.dnd.on_code =
account.231.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.231.reg.enable =
handset.231.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.231.xsi.user =%BWLOGIN-ID-231% account.231.xsi.password =%XSIPASSWORD-231% account.231.xsi.host =%XSP_ADDRESS% account.231.xsi.server_type = account.231.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.231.ldap.enable =
handset.231.ldap.name_filter=
handset.231.ldap.number_filter=
handset.231.ldap.host=
handset.231.ldap.port=
handset.231.ldap.base=
handset.231.ldap.user=
handset.231.ldap.password=
handset.231.ldap.max_hits=
handset.231.ldap.name_attr=
handset.231.ldap.numb_attr=
handset.231.ldap.display_name=
handset.231.ldap.version=
handset.231.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1056 OF 1142
handset.231.ldap.ldap_sort= handset.231.ldap.tls_mode= handset.231.ldap.call_out_lookup= handset.231.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account232 Settings
##
##########################################################################
#############
account.232.enable=%BWLINE-BINARY-232% account.232.label=%BWEXTENSION-232% account.232.display_name=%BWCLID-232% account.232.auth_name=%BWAUTHUSER-232% account.232.user_name=%BWLINEPORT-232% account.232.password=%BWAUTHPASSWORD-232%
#W80B ADD account.232.sip_server.template = account.232.media_transmit.enable =
account.232.alarm.template = account.232.alarm.server = account.232.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.232.sip_server.1.failback_mode =
account.232.sip_server.1.failback_timeout =
account.232.sip_server.1.register_on_enable =
account.232.sip_server.1.failback_subscribe.enable =
account.232.sip_server.1.invite_retry_counts =
account.232.sip_server.1.only_signal_with_registered =
account.232.sip_server.2.failback_mode = account.232.sip_server.2.failback_timeout = account.232.sip_server.2.register_on_enable = account.232.sip_server.2.failback_subscribe.enable = account.232.sip_server.2.invite_retry_counts = account.232.sip_server.2.only_signal_with_registered =
account.232.naptr_build = account.232.fallback.redundancy_type = account.232.fallback.timeout =
account.232.dns_cache_type = account.232.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1057 OF 1142
account.232.anonymous_call = account.232.reject_anonymous_call = account.232.send_anonymous_code = account.232.anonymous_call_oncode = account.232.anonymous_call_offcode = account.232.send_anonymous_rejection_code = account.232.anonymous_reject_oncode = account.232.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.232.codec.g722.enable =
account.232.codec.g722.priority =
account.232.codec.g729.enable = account.232.codec.g729.priority =
account.232.codec.g726_16.enable = account.232.codec.g726_16.priority =
account.232.codec.g726_24.enable = account.232.codec.g726_24.priority =
account.232.codec.g726_32.enable = account.232.codec.g726_32.priority =
account.232.codec.g726_40.enable = account.232.codec.g726_40.priority =
account.232.codec.ilbc.enable = account.232.codec.ilbc.priority =
account.232.codec.pcmu.enable = account.232.codec.pcmu.priority =
account.232.codec.pcma.enable = account.232.codec.pcma.priority =
account.232.codec.opus.enable = account.232.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.232.nat.nat_traversal = account.232.nat.udp_update_enable = account.232.nat.udp_update_time = account.232.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1058 OF 1142
########################################################################## #############
account.232.blf.subscribe_period = account.232.dtmf.type = account.232.dtmf.dtmf_payload = account.232.dtmf.info_type = account.232.100rel_enable = account.232.subscribe_register = account.232.subscribe_mwi = account.232.subscribe_mwi_expires = account.232.subscribe_mwi_to_vm = voice_mail.number.232 = %BWVOICE-PORTAL-NUMBER-232% account.232.display_mwi.enable = account.232.cid_source = account.232.cid_source_privacy = account.232.cid_source_ppi = account.232.session_timer.enable = account.232.session_timer.expires = account.232.session_timer.refresher = account.232.enable_user_equal_phone = account.232.srtp_encryption = account.232.ptime = account.232.shared_line = %BWSHAREDLINE-BINARY-232% account.232.register_mac = account.232.register_line = account.232.reg_fail_retry_interval = account.232.reg_failed_retry_min_time = account.232.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.232.conf_type =
account.232.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-232%
account.232.sip_server_type = account.232.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.232.register_expires_overlap = account.232.subscribe_expires_overlap = account.232.auto_dial_enable = account.232.auto_dial_num = account.232.cp_source = account.232.transfer_refer_to_contact_header.enable = #V80 Add account.232.custom_ua = account.232.callpark_enable = account.232.check_cseq.enable = account.232.check_to_tag.enable = account.232.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1059 OF 1142
account.232.line_seize.expires = account.232.update_ack_while_dialing = account.232.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.232.always_fwd.enable =
account.232.always_fwd.target =
account.232.always_fwd.off_code =
account.232.always_fwd.on_code =
account.232.busy_fwd.enable =
account.232.busy_fwd.target =
account.232.busy_fwd.off_code =
account.232.busy_fwd.on_code =
account.232.timeout_fwd.enable =
account.232.timeout_fwd.target =
account.232.timeout_fwd.timeout =
account.232.timeout_fwd.off_code =
account.232.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.232.dnd.enable =
account.232.dnd.on_code =
account.232.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.232.reg.enable =
handset.232.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.232.xsi.user =%BWLOGIN-ID-232% account.232.xsi.password =%XSIPASSWORD-232% account.232.xsi.host =%XSP_ADDRESS% account.232.xsi.server_type = account.232.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1060 OF 1142
########################################################################## ############# handset.232.ldap.enable = handset.232.ldap.name_filter= handset.232.ldap.number_filter= handset.232.ldap.host= handset.232.ldap.port= handset.232.ldap.base= handset.232.ldap.user= handset.232.ldap.password= handset.232.ldap.max_hits= handset.232.ldap.name_attr= handset.232.ldap.numb_attr= handset.232.ldap.display_name= handset.232.ldap.version= handset.232.ldap.call_in_lookup= handset.232.ldap.ldap_sort= handset.232.ldap.tls_mode= handset.232.ldap.call_out_lookup= handset.232.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account233 Settings
##
##########################################################################
#############
account.233.enable=%BWLINE-BINARY-233% account.233.label=%BWEXTENSION-233% account.233.display_name=%BWCLID-233% account.233.auth_name=%BWAUTHUSER-233% account.233.user_name=%BWLINEPORT-233% account.233.password=%BWAUTHPASSWORD-233%
#W80B ADD account.233.sip_server.template = account.233.media_transmit.enable =
account.233.alarm.template = account.233.alarm.server = account.233.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.233.sip_server.1.failback_mode =
account.233.sip_server.1.failback_timeout =
account.233.sip_server.1.register_on_enable =
account.233.sip_server.1.failback_subscribe.enable =
account.233.sip_server.1.invite_retry_counts =
account.233.sip_server.1.only_signal_with_registered =
account.233.sip_server.2.failback_mode = account.233.sip_server.2.failback_timeout = account.233.sip_server.2.register_on_enable = account.233.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1061 OF 1142
account.233.sip_server.2.invite_retry_counts = account.233.sip_server.2.only_signal_with_registered =
account.233.naptr_build = account.233.fallback.redundancy_type = account.233.fallback.timeout =
account.233.dns_cache_type = account.233.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.233.anonymous_call =
account.233.reject_anonymous_call =
account.233.send_anonymous_code =
account.233.anonymous_call_oncode =
account.233.anonymous_call_offcode =
account.233.send_anonymous_rejection_code =
account.233.anonymous_reject_oncode =
account.233.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.233.codec.g722.enable =
account.233.codec.g722.priority =
account.233.codec.g729.enable = account.233.codec.g729.priority =
account.233.codec.g726_16.enable = account.233.codec.g726_16.priority =
account.233.codec.g726_24.enable = account.233.codec.g726_24.priority =
account.233.codec.g726_32.enable = account.233.codec.g726_32.priority =
account.233.codec.g726_40.enable = account.233.codec.g726_40.priority =
account.233.codec.ilbc.enable = account.233.codec.ilbc.priority =
account.233.codec.pcmu.enable = account.233.codec.pcmu.priority =
account.233.codec.pcma.enable = account.233.codec.pcma.priority =
account.233.codec.opus.enable = account.233.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1062 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.233.nat.nat_traversal = account.233.nat.udp_update_enable = account.233.nat.udp_update_time = account.233.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.233.blf.subscribe_period = account.233.dtmf.type = account.233.dtmf.dtmf_payload = account.233.dtmf.info_type = account.233.100rel_enable = account.233.subscribe_register = account.233.subscribe_mwi = account.233.subscribe_mwi_expires = account.233.subscribe_mwi_to_vm = voice_mail.number.233 = %BWVOICE-PORTAL-NUMBER-233% account.233.display_mwi.enable = account.233.cid_source = account.233.cid_source_privacy = account.233.cid_source_ppi = account.233.session_timer.enable = account.233.session_timer.expires = account.233.session_timer.refresher = account.233.enable_user_equal_phone = account.233.srtp_encryption = account.233.ptime = account.233.shared_line = %BWSHAREDLINE-BINARY-233% account.233.register_mac = account.233.register_line = account.233.reg_fail_retry_interval = account.233.reg_failed_retry_min_time = account.233.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.233.conf_type =
account.233.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-233%
account.233.sip_server_type = account.233.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1063 OF 1142
########################################################################## ############# ##DECT V81 Add
account.233.register_expires_overlap = account.233.subscribe_expires_overlap = account.233.auto_dial_enable = account.233.auto_dial_num = account.233.cp_source = account.233.transfer_refer_to_contact_header.enable = #V80 Add account.233.custom_ua = account.233.callpark_enable = account.233.check_cseq.enable = account.233.check_to_tag.enable = account.233.hold_use_inactive = account.233.line_seize.expires = account.233.update_ack_while_dialing = account.233.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.233.always_fwd.enable =
account.233.always_fwd.target =
account.233.always_fwd.off_code =
account.233.always_fwd.on_code =
account.233.busy_fwd.enable =
account.233.busy_fwd.target =
account.233.busy_fwd.off_code =
account.233.busy_fwd.on_code =
account.233.timeout_fwd.enable =
account.233.timeout_fwd.target =
account.233.timeout_fwd.timeout =
account.233.timeout_fwd.off_code =
account.233.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.233.dnd.enable =
account.233.dnd.on_code =
account.233.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.233.reg.enable =
handset.233.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1064 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.233.xsi.user =%BWLOGIN-ID-233% account.233.xsi.password =%XSIPASSWORD-233% account.233.xsi.host =%XSP_ADDRESS% account.233.xsi.server_type = account.233.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.233.ldap.enable =
handset.233.ldap.name_filter=
handset.233.ldap.number_filter=
handset.233.ldap.host=
handset.233.ldap.port=
handset.233.ldap.base=
handset.233.ldap.user=
handset.233.ldap.password=
handset.233.ldap.max_hits=
handset.233.ldap.name_attr=
handset.233.ldap.numb_attr=
handset.233.ldap.display_name=
handset.233.ldap.version=
handset.233.ldap.call_in_lookup=
handset.233.ldap.ldap_sort=
handset.233.ldap.tls_mode=
handset.233.ldap.call_out_lookup=
handset.233.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account234 Settings
##
##########################################################################
#############
account.234.enable=%BWLINE-BINARY-234% account.234.label=%BWEXTENSION-234% account.234.display_name=%BWCLID-234% account.234.auth_name=%BWAUTHUSER-234% account.234.user_name=%BWLINEPORT-234% account.234.password=%BWAUTHPASSWORD-234%
#W80B ADD account.234.sip_server.template = account.234.media_transmit.enable =
account.234.alarm.template = account.234.alarm.server = account.234.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1065 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.234.sip_server.1.failback_mode =
account.234.sip_server.1.failback_timeout =
account.234.sip_server.1.register_on_enable =
account.234.sip_server.1.failback_subscribe.enable =
account.234.sip_server.1.invite_retry_counts =
account.234.sip_server.1.only_signal_with_registered =
account.234.sip_server.2.failback_mode = account.234.sip_server.2.failback_timeout = account.234.sip_server.2.register_on_enable = account.234.sip_server.2.failback_subscribe.enable = account.234.sip_server.2.invite_retry_counts = account.234.sip_server.2.only_signal_with_registered =
account.234.naptr_build = account.234.fallback.redundancy_type = account.234.fallback.timeout =
account.234.dns_cache_type = account.234.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.234.anonymous_call =
account.234.reject_anonymous_call =
account.234.send_anonymous_code =
account.234.anonymous_call_oncode =
account.234.anonymous_call_offcode =
account.234.send_anonymous_rejection_code =
account.234.anonymous_reject_oncode =
account.234.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.234.codec.g722.enable =
account.234.codec.g722.priority =
account.234.codec.g729.enable = account.234.codec.g729.priority =
account.234.codec.g726_16.enable = account.234.codec.g726_16.priority =
account.234.codec.g726_24.enable = account.234.codec.g726_24.priority =
account.234.codec.g726_32.enable = account.234.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1066 OF 1142
account.234.codec.g726_40.enable = account.234.codec.g726_40.priority =
account.234.codec.ilbc.enable = account.234.codec.ilbc.priority =
account.234.codec.pcmu.enable = account.234.codec.pcmu.priority =
account.234.codec.pcma.enable = account.234.codec.pcma.priority =
account.234.codec.opus.enable = account.234.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.234.nat.nat_traversal = account.234.nat.udp_update_enable = account.234.nat.udp_update_time = account.234.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.234.blf.subscribe_period = account.234.dtmf.type = account.234.dtmf.dtmf_payload = account.234.dtmf.info_type = account.234.100rel_enable = account.234.subscribe_register = account.234.subscribe_mwi = account.234.subscribe_mwi_expires = account.234.subscribe_mwi_to_vm = voice_mail.number.234 = %BWVOICE-PORTAL-NUMBER-234% account.234.display_mwi.enable = account.234.cid_source = account.234.cid_source_privacy = account.234.cid_source_ppi = account.234.session_timer.enable = account.234.session_timer.expires = account.234.session_timer.refresher = account.234.enable_user_equal_phone = account.234.srtp_encryption = account.234.ptime = account.234.shared_line = %BWSHAREDLINE-BINARY-234% account.234.register_mac = account.234.register_line = account.234.reg_fail_retry_interval = account.234.reg_failed_retry_min_time = account.234.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1067 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.234.conf_type =
account.234.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-234%
account.234.sip_server_type = account.234.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.234.register_expires_overlap = account.234.subscribe_expires_overlap = account.234.auto_dial_enable = account.234.auto_dial_num = account.234.cp_source = account.234.transfer_refer_to_contact_header.enable = #V80 Add account.234.custom_ua = account.234.callpark_enable = account.234.check_cseq.enable = account.234.check_to_tag.enable = account.234.hold_use_inactive = account.234.line_seize.expires = account.234.update_ack_while_dialing = account.234.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.234.always_fwd.enable =
account.234.always_fwd.target =
account.234.always_fwd.off_code =
account.234.always_fwd.on_code =
account.234.busy_fwd.enable =
account.234.busy_fwd.target =
account.234.busy_fwd.off_code =
account.234.busy_fwd.on_code =
account.234.timeout_fwd.enable =
account.234.timeout_fwd.target =
account.234.timeout_fwd.timeout =
account.234.timeout_fwd.off_code =
account.234.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1068 OF 1142
account.234.dnd.enable = account.234.dnd.on_code = account.234.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.234.reg.enable =
handset.234.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.234.xsi.user =%BWLOGIN-ID-234% account.234.xsi.password =%XSIPASSWORD-234% account.234.xsi.host =%XSP_ADDRESS% account.234.xsi.server_type = account.234.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.234.ldap.enable =
handset.234.ldap.name_filter=
handset.234.ldap.number_filter=
handset.234.ldap.host=
handset.234.ldap.port=
handset.234.ldap.base=
handset.234.ldap.user=
handset.234.ldap.password=
handset.234.ldap.max_hits=
handset.234.ldap.name_attr=
handset.234.ldap.numb_attr=
handset.234.ldap.display_name=
handset.234.ldap.version=
handset.234.ldap.call_in_lookup=
handset.234.ldap.ldap_sort=
handset.234.ldap.tls_mode=
handset.234.ldap.call_out_lookup=
handset.234.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account235 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1069 OF 1142
account.235.enable=%BWLINE-BINARY-235% account.235.label=%BWEXTENSION-235% account.235.display_name=%BWCLID-235% account.235.auth_name=%BWAUTHUSER-235% account.235.user_name=%BWLINEPORT-235% account.235.password=%BWAUTHPASSWORD-235%
#W80B ADD account.235.sip_server.template = account.235.media_transmit.enable =
account.235.alarm.template = account.235.alarm.server = account.235.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.235.sip_server.1.failback_mode =
account.235.sip_server.1.failback_timeout =
account.235.sip_server.1.register_on_enable =
account.235.sip_server.1.failback_subscribe.enable =
account.235.sip_server.1.invite_retry_counts =
account.235.sip_server.1.only_signal_with_registered =
account.235.sip_server.2.failback_mode = account.235.sip_server.2.failback_timeout = account.235.sip_server.2.register_on_enable = account.235.sip_server.2.failback_subscribe.enable = account.235.sip_server.2.invite_retry_counts = account.235.sip_server.2.only_signal_with_registered =
account.235.naptr_build = account.235.fallback.redundancy_type = account.235.fallback.timeout =
account.235.dns_cache_type = account.235.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.235.anonymous_call =
account.235.reject_anonymous_call =
account.235.send_anonymous_code =
account.235.anonymous_call_oncode =
account.235.anonymous_call_offcode =
account.235.send_anonymous_rejection_code =
account.235.anonymous_reject_oncode =
account.235.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1070 OF 1142
########################################################################## ############# account.235.codec.g722.enable = account.235.codec.g722.priority =
account.235.codec.g729.enable = account.235.codec.g729.priority =
account.235.codec.g726_16.enable = account.235.codec.g726_16.priority =
account.235.codec.g726_24.enable = account.235.codec.g726_24.priority =
account.235.codec.g726_32.enable = account.235.codec.g726_32.priority =
account.235.codec.g726_40.enable = account.235.codec.g726_40.priority =
account.235.codec.ilbc.enable = account.235.codec.ilbc.priority =
account.235.codec.pcmu.enable = account.235.codec.pcmu.priority =
account.235.codec.pcma.enable = account.235.codec.pcma.priority =
account.235.codec.opus.enable = account.235.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.235.nat.nat_traversal = account.235.nat.udp_update_enable = account.235.nat.udp_update_time = account.235.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.235.blf.subscribe_period = account.235.dtmf.type = account.235.dtmf.dtmf_payload = account.235.dtmf.info_type = account.235.100rel_enable = account.235.subscribe_register = account.235.subscribe_mwi = account.235.subscribe_mwi_expires = account.235.subscribe_mwi_to_vm = voice_mail.number.235 = %BWVOICE-PORTAL-NUMBER-235% account.235.display_mwi.enable = account.235.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1071 OF 1142
account.235.cid_source_privacy = account.235.cid_source_ppi = account.235.session_timer.enable = account.235.session_timer.expires = account.235.session_timer.refresher = account.235.enable_user_equal_phone = account.235.srtp_encryption = account.235.ptime = account.235.shared_line = %BWSHAREDLINE-BINARY-235% account.235.register_mac = account.235.register_line = account.235.reg_fail_retry_interval = account.235.reg_failed_retry_min_time = account.235.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.235.conf_type =
account.235.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-235%
account.235.sip_server_type = account.235.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.235.register_expires_overlap = account.235.subscribe_expires_overlap = account.235.auto_dial_enable = account.235.auto_dial_num = account.235.cp_source = account.235.transfer_refer_to_contact_header.enable = #V80 Add account.235.custom_ua = account.235.callpark_enable = account.235.check_cseq.enable = account.235.check_to_tag.enable = account.235.hold_use_inactive = account.235.line_seize.expires = account.235.update_ack_while_dialing = account.235.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.235.always_fwd.enable =
account.235.always_fwd.target =
account.235.always_fwd.off_code =
account.235.always_fwd.on_code =
account.235.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1072 OF 1142
account.235.busy_fwd.target = account.235.busy_fwd.off_code = account.235.busy_fwd.on_code = account.235.timeout_fwd.enable = account.235.timeout_fwd.target = account.235.timeout_fwd.timeout = account.235.timeout_fwd.off_code = account.235.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.235.dnd.enable =
account.235.dnd.on_code =
account.235.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.235.reg.enable =
handset.235.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.235.xsi.user =%BWLOGIN-ID-235% account.235.xsi.password =%XSIPASSWORD-235% account.235.xsi.host =%XSP_ADDRESS% account.235.xsi.server_type = account.235.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.235.ldap.enable =
handset.235.ldap.name_filter=
handset.235.ldap.number_filter=
handset.235.ldap.host=
handset.235.ldap.port=
handset.235.ldap.base=
handset.235.ldap.user=
handset.235.ldap.password=
handset.235.ldap.max_hits=
handset.235.ldap.name_attr=
handset.235.ldap.numb_attr=
handset.235.ldap.display_name=
handset.235.ldap.version=
handset.235.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1073 OF 1142
handset.235.ldap.ldap_sort= handset.235.ldap.tls_mode= handset.235.ldap.call_out_lookup= handset.235.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account236 Settings
##
##########################################################################
#############
account.236.enable=%BWLINE-BINARY-236% account.236.label=%BWEXTENSION-236% account.236.display_name=%BWCLID-236% account.236.auth_name=%BWAUTHUSER-236% account.236.user_name=%BWLINEPORT-236% account.236.password=%BWAUTHPASSWORD-236%
#W80B ADD account.236.sip_server.template = account.236.media_transmit.enable =
account.236.alarm.template = account.236.alarm.server = account.236.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.236.sip_server.1.failback_mode =
account.236.sip_server.1.failback_timeout =
account.236.sip_server.1.register_on_enable =
account.236.sip_server.1.failback_subscribe.enable =
account.236.sip_server.1.invite_retry_counts =
account.236.sip_server.1.only_signal_with_registered =
account.236.sip_server.2.failback_mode = account.236.sip_server.2.failback_timeout = account.236.sip_server.2.register_on_enable = account.236.sip_server.2.failback_subscribe.enable = account.236.sip_server.2.invite_retry_counts = account.236.sip_server.2.only_signal_with_registered =
account.236.naptr_build = account.236.fallback.redundancy_type = account.236.fallback.timeout =
account.236.dns_cache_type = account.236.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1074 OF 1142
account.236.anonymous_call = account.236.reject_anonymous_call = account.236.send_anonymous_code = account.236.anonymous_call_oncode = account.236.anonymous_call_offcode = account.236.send_anonymous_rejection_code = account.236.anonymous_reject_oncode = account.236.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.236.codec.g722.enable =
account.236.codec.g722.priority =
account.236.codec.g729.enable = account.236.codec.g729.priority =
account.236.codec.g726_16.enable = account.236.codec.g726_16.priority =
account.236.codec.g726_24.enable = account.236.codec.g726_24.priority =
account.236.codec.g726_32.enable = account.236.codec.g726_32.priority =
account.236.codec.g726_40.enable = account.236.codec.g726_40.priority =
account.236.codec.ilbc.enable = account.236.codec.ilbc.priority =
account.236.codec.pcmu.enable = account.236.codec.pcmu.priority =
account.236.codec.pcma.enable = account.236.codec.pcma.priority =
account.236.codec.opus.enable = account.236.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.236.nat.nat_traversal = account.236.nat.udp_update_enable = account.236.nat.udp_update_time = account.236.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1075 OF 1142
########################################################################## #############
account.236.blf.subscribe_period = account.236.dtmf.type = account.236.dtmf.dtmf_payload = account.236.dtmf.info_type = account.236.100rel_enable = account.236.subscribe_register = account.236.subscribe_mwi = account.236.subscribe_mwi_expires = account.236.subscribe_mwi_to_vm = voice_mail.number.236 = %BWVOICE-PORTAL-NUMBER-236% account.236.display_mwi.enable = account.236.cid_source = account.236.cid_source_privacy = account.236.cid_source_ppi = account.236.session_timer.enable = account.236.session_timer.expires = account.236.session_timer.refresher = account.236.enable_user_equal_phone = account.236.srtp_encryption = account.236.ptime = account.236.shared_line = %BWSHAREDLINE-BINARY-236% account.236.register_mac = account.236.register_line = account.236.reg_fail_retry_interval = account.236.reg_failed_retry_min_time = account.236.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.236.conf_type =
account.236.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-236%
account.236.sip_server_type = account.236.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.236.register_expires_overlap = account.236.subscribe_expires_overlap = account.236.auto_dial_enable = account.236.auto_dial_num = account.236.cp_source = account.236.transfer_refer_to_contact_header.enable = #V80 Add account.236.custom_ua = account.236.callpark_enable = account.236.check_cseq.enable = account.236.check_to_tag.enable = account.236.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1076 OF 1142
account.236.line_seize.expires = account.236.update_ack_while_dialing = account.236.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.236.always_fwd.enable =
account.236.always_fwd.target =
account.236.always_fwd.off_code =
account.236.always_fwd.on_code =
account.236.busy_fwd.enable =
account.236.busy_fwd.target =
account.236.busy_fwd.off_code =
account.236.busy_fwd.on_code =
account.236.timeout_fwd.enable =
account.236.timeout_fwd.target =
account.236.timeout_fwd.timeout =
account.236.timeout_fwd.off_code =
account.236.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.236.dnd.enable =
account.236.dnd.on_code =
account.236.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.236.reg.enable =
handset.236.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.236.xsi.user =%BWLOGIN-ID-236% account.236.xsi.password =%XSIPASSWORD-236% account.236.xsi.host =%XSP_ADDRESS% account.236.xsi.server_type = account.236.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1077 OF 1142
########################################################################## ############# handset.236.ldap.enable = handset.236.ldap.name_filter= handset.236.ldap.number_filter= handset.236.ldap.host= handset.236.ldap.port= handset.236.ldap.base= handset.236.ldap.user= handset.236.ldap.password= handset.236.ldap.max_hits= handset.236.ldap.name_attr= handset.236.ldap.numb_attr= handset.236.ldap.display_name= handset.236.ldap.version= handset.236.ldap.call_in_lookup= handset.236.ldap.ldap_sort= handset.236.ldap.tls_mode= handset.236.ldap.call_out_lookup= handset.236.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account237 Settings
##
##########################################################################
#############
account.237.enable=%BWLINE-BINARY-237% account.237.label=%BWEXTENSION-237% account.237.display_name=%BWCLID-237% account.237.auth_name=%BWAUTHUSER-237% account.237.user_name=%BWLINEPORT-237% account.237.password=%BWAUTHPASSWORD-237%
#W80B ADD account.237.sip_server.template = account.237.media_transmit.enable =
account.237.alarm.template = account.237.alarm.server = account.237.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.237.sip_server.1.failback_mode =
account.237.sip_server.1.failback_timeout =
account.237.sip_server.1.register_on_enable =
account.237.sip_server.1.failback_subscribe.enable =
account.237.sip_server.1.invite_retry_counts =
account.237.sip_server.1.only_signal_with_registered =
account.237.sip_server.2.failback_mode = account.237.sip_server.2.failback_timeout = account.237.sip_server.2.register_on_enable = account.237.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1078 OF 1142
account.237.sip_server.2.invite_retry_counts = account.237.sip_server.2.only_signal_with_registered =
account.237.naptr_build = account.237.fallback.redundancy_type = account.237.fallback.timeout =
account.237.dns_cache_type = account.237.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.237.anonymous_call =
account.237.reject_anonymous_call =
account.237.send_anonymous_code =
account.237.anonymous_call_oncode =
account.237.anonymous_call_offcode =
account.237.send_anonymous_rejection_code =
account.237.anonymous_reject_oncode =
account.237.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.237.codec.g722.enable =
account.237.codec.g722.priority =
account.237.codec.g729.enable = account.237.codec.g729.priority =
account.237.codec.g726_16.enable = account.237.codec.g726_16.priority =
account.237.codec.g726_24.enable = account.237.codec.g726_24.priority =
account.237.codec.g726_32.enable = account.237.codec.g726_32.priority =
account.237.codec.g726_40.enable = account.237.codec.g726_40.priority =
account.237.codec.ilbc.enable = account.237.codec.ilbc.priority =
account.237.codec.pcmu.enable = account.237.codec.pcmu.priority =
account.237.codec.pcma.enable = account.237.codec.pcma.priority =
account.237.codec.opus.enable = account.237.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1079 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.237.nat.nat_traversal = account.237.nat.udp_update_enable = account.237.nat.udp_update_time = account.237.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.237.blf.subscribe_period = account.237.dtmf.type = account.237.dtmf.dtmf_payload = account.237.dtmf.info_type = account.237.100rel_enable = account.237.subscribe_register = account.237.subscribe_mwi = account.237.subscribe_mwi_expires = account.237.subscribe_mwi_to_vm = voice_mail.number.237 = %BWVOICE-PORTAL-NUMBER-237% account.237.display_mwi.enable = account.237.cid_source = account.237.cid_source_privacy = account.237.cid_source_ppi = account.237.session_timer.enable = account.237.session_timer.expires = account.237.session_timer.refresher = account.237.enable_user_equal_phone = account.237.srtp_encryption = account.237.ptime = account.237.shared_line = %BWSHAREDLINE-BINARY-237% account.237.register_mac = account.237.register_line = account.237.reg_fail_retry_interval = account.237.reg_failed_retry_min_time = account.237.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.237.conf_type =
account.237.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-237%
account.237.sip_server_type = account.237.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1080 OF 1142
########################################################################## ############# ##DECT V81 Add
account.237.register_expires_overlap = account.237.subscribe_expires_overlap = account.237.auto_dial_enable = account.237.auto_dial_num = account.237.cp_source = account.237.transfer_refer_to_contact_header.enable = #V80 Add account.237.custom_ua = account.237.callpark_enable = account.237.check_cseq.enable = account.237.check_to_tag.enable = account.237.hold_use_inactive = account.237.line_seize.expires = account.237.update_ack_while_dialing = account.237.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.237.always_fwd.enable =
account.237.always_fwd.target =
account.237.always_fwd.off_code =
account.237.always_fwd.on_code =
account.237.busy_fwd.enable =
account.237.busy_fwd.target =
account.237.busy_fwd.off_code =
account.237.busy_fwd.on_code =
account.237.timeout_fwd.enable =
account.237.timeout_fwd.target =
account.237.timeout_fwd.timeout =
account.237.timeout_fwd.off_code =
account.237.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.237.dnd.enable =
account.237.dnd.on_code =
account.237.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.237.reg.enable =
handset.237.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1081 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.237.xsi.user =%BWLOGIN-ID-237% account.237.xsi.password =%XSIPASSWORD-237% account.237.xsi.host =%XSP_ADDRESS% account.237.xsi.server_type = account.237.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.237.ldap.enable =
handset.237.ldap.name_filter=
handset.237.ldap.number_filter=
handset.237.ldap.host=
handset.237.ldap.port=
handset.237.ldap.base=
handset.237.ldap.user=
handset.237.ldap.password=
handset.237.ldap.max_hits=
handset.237.ldap.name_attr=
handset.237.ldap.numb_attr=
handset.237.ldap.display_name=
handset.237.ldap.version=
handset.237.ldap.call_in_lookup=
handset.237.ldap.ldap_sort=
handset.237.ldap.tls_mode=
handset.237.ldap.call_out_lookup=
handset.237.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account238 Settings
##
##########################################################################
#############
account.238.enable=%BWLINE-BINARY-238% account.238.label=%BWEXTENSION-238% account.238.display_name=%BWCLID-238% account.238.auth_name=%BWAUTHUSER-238% account.238.user_name=%BWLINEPORT-238% account.238.password=%BWAUTHPASSWORD-238%
#W80B ADD account.238.sip_server.template = account.238.media_transmit.enable =
account.238.alarm.template = account.238.alarm.server = account.238.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1082 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.238.sip_server.1.failback_mode =
account.238.sip_server.1.failback_timeout =
account.238.sip_server.1.register_on_enable =
account.238.sip_server.1.failback_subscribe.enable =
account.238.sip_server.1.invite_retry_counts =
account.238.sip_server.1.only_signal_with_registered =
account.238.sip_server.2.failback_mode = account.238.sip_server.2.failback_timeout = account.238.sip_server.2.register_on_enable = account.238.sip_server.2.failback_subscribe.enable = account.238.sip_server.2.invite_retry_counts = account.238.sip_server.2.only_signal_with_registered =
account.238.naptr_build = account.238.fallback.redundancy_type = account.238.fallback.timeout =
account.238.dns_cache_type = account.238.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.238.anonymous_call =
account.238.reject_anonymous_call =
account.238.send_anonymous_code =
account.238.anonymous_call_oncode =
account.238.anonymous_call_offcode =
account.238.send_anonymous_rejection_code =
account.238.anonymous_reject_oncode =
account.238.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.238.codec.g722.enable =
account.238.codec.g722.priority =
account.238.codec.g729.enable = account.238.codec.g729.priority =
account.238.codec.g726_16.enable = account.238.codec.g726_16.priority =
account.238.codec.g726_24.enable = account.238.codec.g726_24.priority =
account.238.codec.g726_32.enable = account.238.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1083 OF 1142
account.238.codec.g726_40.enable = account.238.codec.g726_40.priority =
account.238.codec.ilbc.enable = account.238.codec.ilbc.priority =
account.238.codec.pcmu.enable = account.238.codec.pcmu.priority =
account.238.codec.pcma.enable = account.238.codec.pcma.priority =
account.238.codec.opus.enable = account.238.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.238.nat.nat_traversal = account.238.nat.udp_update_enable = account.238.nat.udp_update_time = account.238.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.238.blf.subscribe_period = account.238.dtmf.type = account.238.dtmf.dtmf_payload = account.238.dtmf.info_type = account.238.100rel_enable = account.238.subscribe_register = account.238.subscribe_mwi = account.238.subscribe_mwi_expires = account.238.subscribe_mwi_to_vm = voice_mail.number.238 = %BWVOICE-PORTAL-NUMBER-238% account.238.display_mwi.enable = account.238.cid_source = account.238.cid_source_privacy = account.238.cid_source_ppi = account.238.session_timer.enable = account.238.session_timer.expires = account.238.session_timer.refresher = account.238.enable_user_equal_phone = account.238.srtp_encryption = account.238.ptime = account.238.shared_line = %BWSHAREDLINE-BINARY-238% account.238.register_mac = account.238.register_line = account.238.reg_fail_retry_interval = account.238.reg_failed_retry_min_time = account.238.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1084 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.238.conf_type =
account.238.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-238%
account.238.sip_server_type = account.238.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.238.register_expires_overlap = account.238.subscribe_expires_overlap = account.238.auto_dial_enable = account.238.auto_dial_num = account.238.cp_source = account.238.transfer_refer_to_contact_header.enable = #V80 Add account.238.custom_ua = account.238.callpark_enable = account.238.check_cseq.enable = account.238.check_to_tag.enable = account.238.hold_use_inactive = account.238.line_seize.expires = account.238.update_ack_while_dialing = account.238.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.238.always_fwd.enable =
account.238.always_fwd.target =
account.238.always_fwd.off_code =
account.238.always_fwd.on_code =
account.238.busy_fwd.enable =
account.238.busy_fwd.target =
account.238.busy_fwd.off_code =
account.238.busy_fwd.on_code =
account.238.timeout_fwd.enable =
account.238.timeout_fwd.target =
account.238.timeout_fwd.timeout =
account.238.timeout_fwd.off_code =
account.238.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1085 OF 1142
account.238.dnd.enable = account.238.dnd.on_code = account.238.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.238.reg.enable =
handset.238.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.238.xsi.user =%BWLOGIN-ID-238% account.238.xsi.password =%XSIPASSWORD-238% account.238.xsi.host =%XSP_ADDRESS% account.238.xsi.server_type = account.238.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.238.ldap.enable =
handset.238.ldap.name_filter=
handset.238.ldap.number_filter=
handset.238.ldap.host=
handset.238.ldap.port=
handset.238.ldap.base=
handset.238.ldap.user=
handset.238.ldap.password=
handset.238.ldap.max_hits=
handset.238.ldap.name_attr=
handset.238.ldap.numb_attr=
handset.238.ldap.display_name=
handset.238.ldap.version=
handset.238.ldap.call_in_lookup=
handset.238.ldap.ldap_sort=
handset.238.ldap.tls_mode=
handset.238.ldap.call_out_lookup=
handset.238.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account239 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1086 OF 1142
account.239.enable=%BWLINE-BINARY-239% account.239.label=%BWEXTENSION-239% account.239.display_name=%BWCLID-239% account.239.auth_name=%BWAUTHUSER-239% account.239.user_name=%BWLINEPORT-239% account.239.password=%BWAUTHPASSWORD-239%
#W80B ADD account.239.sip_server.template = account.239.media_transmit.enable =
account.239.alarm.template = account.239.alarm.server = account.239.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.239.sip_server.1.failback_mode =
account.239.sip_server.1.failback_timeout =
account.239.sip_server.1.register_on_enable =
account.239.sip_server.1.failback_subscribe.enable =
account.239.sip_server.1.invite_retry_counts =
account.239.sip_server.1.only_signal_with_registered =
account.239.sip_server.2.failback_mode = account.239.sip_server.2.failback_timeout = account.239.sip_server.2.register_on_enable = account.239.sip_server.2.failback_subscribe.enable = account.239.sip_server.2.invite_retry_counts = account.239.sip_server.2.only_signal_with_registered =
account.239.naptr_build = account.239.fallback.redundancy_type = account.239.fallback.timeout =
account.239.dns_cache_type = account.239.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.239.anonymous_call =
account.239.reject_anonymous_call =
account.239.send_anonymous_code =
account.239.anonymous_call_oncode =
account.239.anonymous_call_offcode =
account.239.send_anonymous_rejection_code =
account.239.anonymous_reject_oncode =
account.239.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1087 OF 1142
########################################################################## ############# account.239.codec.g722.enable = account.239.codec.g722.priority =
account.239.codec.g729.enable = account.239.codec.g729.priority =
account.239.codec.g726_16.enable = account.239.codec.g726_16.priority =
account.239.codec.g726_24.enable = account.239.codec.g726_24.priority =
account.239.codec.g726_32.enable = account.239.codec.g726_32.priority =
account.239.codec.g726_40.enable = account.239.codec.g726_40.priority =
account.239.codec.ilbc.enable = account.239.codec.ilbc.priority =
account.239.codec.pcmu.enable = account.239.codec.pcmu.priority =
account.239.codec.pcma.enable = account.239.codec.pcma.priority =
account.239.codec.opus.enable = account.239.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.239.nat.nat_traversal = account.239.nat.udp_update_enable = account.239.nat.udp_update_time = account.239.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.239.blf.subscribe_period = account.239.dtmf.type = account.239.dtmf.dtmf_payload = account.239.dtmf.info_type = account.239.100rel_enable = account.239.subscribe_register = account.239.subscribe_mwi = account.239.subscribe_mwi_expires = account.239.subscribe_mwi_to_vm = voice_mail.number.239 = %BWVOICE-PORTAL-NUMBER-239% account.239.display_mwi.enable = account.239.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1088 OF 1142
account.239.cid_source_privacy = account.239.cid_source_ppi = account.239.session_timer.enable = account.239.session_timer.expires = account.239.session_timer.refresher = account.239.enable_user_equal_phone = account.239.srtp_encryption = account.239.ptime = account.239.shared_line = %BWSHAREDLINE-BINARY-239% account.239.register_mac = account.239.register_line = account.239.reg_fail_retry_interval = account.239.reg_failed_retry_min_time = account.239.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.239.conf_type =
account.239.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-239%
account.239.sip_server_type = account.239.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.239.register_expires_overlap = account.239.subscribe_expires_overlap = account.239.auto_dial_enable = account.239.auto_dial_num = account.239.cp_source = account.239.transfer_refer_to_contact_header.enable = #V80 Add account.239.custom_ua = account.239.callpark_enable = account.239.check_cseq.enable = account.239.check_to_tag.enable = account.239.hold_use_inactive = account.239.line_seize.expires = account.239.update_ack_while_dialing = account.239.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.239.always_fwd.enable =
account.239.always_fwd.target =
account.239.always_fwd.off_code =
account.239.always_fwd.on_code =
account.239.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1089 OF 1142
account.239.busy_fwd.target = account.239.busy_fwd.off_code = account.239.busy_fwd.on_code = account.239.timeout_fwd.enable = account.239.timeout_fwd.target = account.239.timeout_fwd.timeout = account.239.timeout_fwd.off_code = account.239.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.239.dnd.enable =
account.239.dnd.on_code =
account.239.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.239.reg.enable =
handset.239.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.239.xsi.user =%BWLOGIN-ID-239% account.239.xsi.password =%XSIPASSWORD-239% account.239.xsi.host =%XSP_ADDRESS% account.239.xsi.server_type = account.239.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.239.ldap.enable =
handset.239.ldap.name_filter=
handset.239.ldap.number_filter=
handset.239.ldap.host=
handset.239.ldap.port=
handset.239.ldap.base=
handset.239.ldap.user=
handset.239.ldap.password=
handset.239.ldap.max_hits=
handset.239.ldap.name_attr=
handset.239.ldap.numb_attr=
handset.239.ldap.display_name=
handset.239.ldap.version=
handset.239.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1090 OF 1142
handset.239.ldap.ldap_sort= handset.239.ldap.tls_mode= handset.239.ldap.call_out_lookup= handset.239.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account240 Settings
##
##########################################################################
#############
account.240.enable=%BWLINE-BINARY-240% account.240.label=%BWEXTENSION-240% account.240.display_name=%BWCLID-240% account.240.auth_name=%BWAUTHUSER-240% account.240.user_name=%BWLINEPORT-240% account.240.password=%BWAUTHPASSWORD-240%
#W80B ADD account.240.sip_server.template = account.240.media_transmit.enable =
account.240.alarm.template = account.240.alarm.server = account.240.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.240.sip_server.1.failback_mode =
account.240.sip_server.1.failback_timeout =
account.240.sip_server.1.register_on_enable =
account.240.sip_server.1.failback_subscribe.enable =
account.240.sip_server.1.invite_retry_counts =
account.240.sip_server.1.only_signal_with_registered =
account.240.sip_server.2.failback_mode = account.240.sip_server.2.failback_timeout = account.240.sip_server.2.register_on_enable = account.240.sip_server.2.failback_subscribe.enable = account.240.sip_server.2.invite_retry_counts = account.240.sip_server.2.only_signal_with_registered =
account.240.naptr_build = account.240.fallback.redundancy_type = account.240.fallback.timeout =
account.240.dns_cache_type = account.240.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1091 OF 1142
account.240.anonymous_call = account.240.reject_anonymous_call = account.240.send_anonymous_code = account.240.anonymous_call_oncode = account.240.anonymous_call_offcode = account.240.send_anonymous_rejection_code = account.240.anonymous_reject_oncode = account.240.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.240.codec.g722.enable =
account.240.codec.g722.priority =
account.240.codec.g729.enable = account.240.codec.g729.priority =
account.240.codec.g726_16.enable = account.240.codec.g726_16.priority =
account.240.codec.g726_24.enable = account.240.codec.g726_24.priority =
account.240.codec.g726_32.enable = account.240.codec.g726_32.priority =
account.240.codec.g726_40.enable = account.240.codec.g726_40.priority =
account.240.codec.ilbc.enable = account.240.codec.ilbc.priority =
account.240.codec.pcmu.enable = account.240.codec.pcmu.priority =
account.240.codec.pcma.enable = account.240.codec.pcma.priority =
account.240.codec.opus.enable = account.240.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.240.nat.nat_traversal = account.240.nat.udp_update_enable = account.240.nat.udp_update_time = account.240.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1092 OF 1142
########################################################################## #############
account.240.blf.subscribe_period = account.240.dtmf.type = account.240.dtmf.dtmf_payload = account.240.dtmf.info_type = account.240.100rel_enable = account.240.subscribe_register = account.240.subscribe_mwi = account.240.subscribe_mwi_expires = account.240.subscribe_mwi_to_vm = voice_mail.number.240 = %BWVOICE-PORTAL-NUMBER-240% account.240.display_mwi.enable = account.240.cid_source = account.240.cid_source_privacy = account.240.cid_source_ppi = account.240.session_timer.enable = account.240.session_timer.expires = account.240.session_timer.refresher = account.240.enable_user_equal_phone = account.240.srtp_encryption = account.240.ptime = account.240.shared_line = %BWSHAREDLINE-BINARY-240% account.240.register_mac = account.240.register_line = account.240.reg_fail_retry_interval = account.240.reg_failed_retry_min_time = account.240.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.240.conf_type =
account.240.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-240%
account.240.sip_server_type = account.240.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.240.register_expires_overlap = account.240.subscribe_expires_overlap = account.240.auto_dial_enable = account.240.auto_dial_num = account.240.cp_source = account.240.transfer_refer_to_contact_header.enable = #V80 Add account.240.custom_ua = account.240.callpark_enable = account.240.check_cseq.enable = account.240.check_to_tag.enable = account.240.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1093 OF 1142
account.240.line_seize.expires = account.240.update_ack_while_dialing = account.240.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.240.always_fwd.enable =
account.240.always_fwd.target =
account.240.always_fwd.off_code =
account.240.always_fwd.on_code =
account.240.busy_fwd.enable =
account.240.busy_fwd.target =
account.240.busy_fwd.off_code =
account.240.busy_fwd.on_code =
account.240.timeout_fwd.enable =
account.240.timeout_fwd.target =
account.240.timeout_fwd.timeout =
account.240.timeout_fwd.off_code =
account.240.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.240.dnd.enable =
account.240.dnd.on_code =
account.240.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.240.reg.enable =
handset.240.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.240.xsi.user =%BWLOGIN-ID-240% account.240.xsi.password =%XSIPASSWORD-240% account.240.xsi.host =%XSP_ADDRESS% account.240.xsi.server_type = account.240.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1094 OF 1142
########################################################################## ############# handset.240.ldap.enable = handset.240.ldap.name_filter= handset.240.ldap.number_filter= handset.240.ldap.host= handset.240.ldap.port= handset.240.ldap.base= handset.240.ldap.user= handset.240.ldap.password= handset.240.ldap.max_hits= handset.240.ldap.name_attr= handset.240.ldap.numb_attr= handset.240.ldap.display_name= handset.240.ldap.version= handset.240.ldap.call_in_lookup= handset.240.ldap.ldap_sort= handset.240.ldap.tls_mode= handset.240.ldap.call_out_lookup= handset.240.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account241 Settings
##
##########################################################################
#############
account.241.enable=%BWLINE-BINARY-241% account.241.label=%BWEXTENSION-241% account.241.display_name=%BWCLID-241% account.241.auth_name=%BWAUTHUSER-241% account.241.user_name=%BWLINEPORT-241% account.241.password=%BWAUTHPASSWORD-241%
#W80B ADD account.241.sip_server.template = account.241.media_transmit.enable =
account.241.alarm.template = account.241.alarm.server = account.241.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.241.sip_server.1.failback_mode =
account.241.sip_server.1.failback_timeout =
account.241.sip_server.1.register_on_enable =
account.241.sip_server.1.failback_subscribe.enable =
account.241.sip_server.1.invite_retry_counts =
account.241.sip_server.1.only_signal_with_registered =
account.241.sip_server.2.failback_mode = account.241.sip_server.2.failback_timeout = account.241.sip_server.2.register_on_enable = account.241.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1095 OF 1142
account.241.sip_server.2.invite_retry_counts = account.241.sip_server.2.only_signal_with_registered =
account.241.naptr_build = account.241.fallback.redundancy_type = account.241.fallback.timeout =
account.241.dns_cache_type = account.241.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.241.anonymous_call =
account.241.reject_anonymous_call =
account.241.send_anonymous_code =
account.241.anonymous_call_oncode =
account.241.anonymous_call_offcode =
account.241.send_anonymous_rejection_code =
account.241.anonymous_reject_oncode =
account.241.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.241.codec.g722.enable =
account.241.codec.g722.priority =
account.241.codec.g729.enable = account.241.codec.g729.priority =
account.241.codec.g726_16.enable = account.241.codec.g726_16.priority =
account.241.codec.g726_24.enable = account.241.codec.g726_24.priority =
account.241.codec.g726_32.enable = account.241.codec.g726_32.priority =
account.241.codec.g726_40.enable = account.241.codec.g726_40.priority =
account.241.codec.ilbc.enable = account.241.codec.ilbc.priority =
account.241.codec.pcmu.enable = account.241.codec.pcmu.priority =
account.241.codec.pcma.enable = account.241.codec.pcma.priority =
account.241.codec.opus.enable = account.241.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1096 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.241.nat.nat_traversal = account.241.nat.udp_update_enable = account.241.nat.udp_update_time = account.241.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.241.blf.subscribe_period = account.241.dtmf.type = account.241.dtmf.dtmf_payload = account.241.dtmf.info_type = account.241.100rel_enable = account.241.subscribe_register = account.241.subscribe_mwi = account.241.subscribe_mwi_expires = account.241.subscribe_mwi_to_vm = voice_mail.number.241 = %BWVOICE-PORTAL-NUMBER-241% account.241.display_mwi.enable = account.241.cid_source = account.241.cid_source_privacy = account.241.cid_source_ppi = account.241.session_timer.enable = account.241.session_timer.expires = account.241.session_timer.refresher = account.241.enable_user_equal_phone = account.241.srtp_encryption = account.241.ptime = account.241.shared_line = %BWSHAREDLINE-BINARY-241% account.241.register_mac = account.241.register_line = account.241.reg_fail_retry_interval = account.241.reg_failed_retry_min_time = account.241.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.241.conf_type =
account.241.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-241%
account.241.sip_server_type = account.241.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1097 OF 1142
########################################################################## ############# ##DECT V81 Add
account.241.register_expires_overlap = account.241.subscribe_expires_overlap = account.241.auto_dial_enable = account.241.auto_dial_num = account.241.cp_source = account.241.transfer_refer_to_contact_header.enable = #V80 Add account.241.custom_ua = account.241.callpark_enable = account.241.check_cseq.enable = account.241.check_to_tag.enable = account.241.hold_use_inactive = account.241.line_seize.expires = account.241.update_ack_while_dialing = account.241.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.241.always_fwd.enable =
account.241.always_fwd.target =
account.241.always_fwd.off_code =
account.241.always_fwd.on_code =
account.241.busy_fwd.enable =
account.241.busy_fwd.target =
account.241.busy_fwd.off_code =
account.241.busy_fwd.on_code =
account.241.timeout_fwd.enable =
account.241.timeout_fwd.target =
account.241.timeout_fwd.timeout =
account.241.timeout_fwd.off_code =
account.241.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.241.dnd.enable =
account.241.dnd.on_code =
account.241.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.241.reg.enable =
handset.241.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1098 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.241.xsi.user =%BWLOGIN-ID-241% account.241.xsi.password =%XSIPASSWORD-241% account.241.xsi.host =%XSP_ADDRESS% account.241.xsi.server_type = account.241.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.241.ldap.enable =
handset.241.ldap.name_filter=
handset.241.ldap.number_filter=
handset.241.ldap.host=
handset.241.ldap.port=
handset.241.ldap.base=
handset.241.ldap.user=
handset.241.ldap.password=
handset.241.ldap.max_hits=
handset.241.ldap.name_attr=
handset.241.ldap.numb_attr=
handset.241.ldap.display_name=
handset.241.ldap.version=
handset.241.ldap.call_in_lookup=
handset.241.ldap.ldap_sort=
handset.241.ldap.tls_mode=
handset.241.ldap.call_out_lookup=
handset.241.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account242 Settings
##
##########################################################################
#############
account.242.enable=%BWLINE-BINARY-242% account.242.label=%BWEXTENSION-242% account.242.display_name=%BWCLID-242% account.242.auth_name=%BWAUTHUSER-242% account.242.user_name=%BWLINEPORT-242% account.242.password=%BWAUTHPASSWORD-242%
#W80B ADD account.242.sip_server.template = account.242.media_transmit.enable =
account.242.alarm.template = account.242.alarm.server = account.242.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1099 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.242.sip_server.1.failback_mode =
account.242.sip_server.1.failback_timeout =
account.242.sip_server.1.register_on_enable =
account.242.sip_server.1.failback_subscribe.enable =
account.242.sip_server.1.invite_retry_counts =
account.242.sip_server.1.only_signal_with_registered =
account.242.sip_server.2.failback_mode = account.242.sip_server.2.failback_timeout = account.242.sip_server.2.register_on_enable = account.242.sip_server.2.failback_subscribe.enable = account.242.sip_server.2.invite_retry_counts = account.242.sip_server.2.only_signal_with_registered =
account.242.naptr_build = account.242.fallback.redundancy_type = account.242.fallback.timeout =
account.242.dns_cache_type = account.242.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.242.anonymous_call =
account.242.reject_anonymous_call =
account.242.send_anonymous_code =
account.242.anonymous_call_oncode =
account.242.anonymous_call_offcode =
account.242.send_anonymous_rejection_code =
account.242.anonymous_reject_oncode =
account.242.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.242.codec.g722.enable =
account.242.codec.g722.priority =
account.242.codec.g729.enable = account.242.codec.g729.priority =
account.242.codec.g726_16.enable = account.242.codec.g726_16.priority =
account.242.codec.g726_24.enable = account.242.codec.g726_24.priority =
account.242.codec.g726_32.enable = account.242.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1100 OF 1142
account.242.codec.g726_40.enable = account.242.codec.g726_40.priority =
account.242.codec.ilbc.enable = account.242.codec.ilbc.priority =
account.242.codec.pcmu.enable = account.242.codec.pcmu.priority =
account.242.codec.pcma.enable = account.242.codec.pcma.priority =
account.242.codec.opus.enable = account.242.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.242.nat.nat_traversal = account.242.nat.udp_update_enable = account.242.nat.udp_update_time = account.242.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.242.blf.subscribe_period = account.242.dtmf.type = account.242.dtmf.dtmf_payload = account.242.dtmf.info_type = account.242.100rel_enable = account.242.subscribe_register = account.242.subscribe_mwi = account.242.subscribe_mwi_expires = account.242.subscribe_mwi_to_vm = voice_mail.number.242 = %BWVOICE-PORTAL-NUMBER-242% account.242.display_mwi.enable = account.242.cid_source = account.242.cid_source_privacy = account.242.cid_source_ppi = account.242.session_timer.enable = account.242.session_timer.expires = account.242.session_timer.refresher = account.242.enable_user_equal_phone = account.242.srtp_encryption = account.242.ptime = account.242.shared_line = %BWSHAREDLINE-BINARY-242% account.242.register_mac = account.242.register_line = account.242.reg_fail_retry_interval = account.242.reg_failed_retry_min_time = account.242.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1101 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.242.conf_type =
account.242.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-242%
account.242.sip_server_type = account.242.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.242.register_expires_overlap = account.242.subscribe_expires_overlap = account.242.auto_dial_enable = account.242.auto_dial_num = account.242.cp_source = account.242.transfer_refer_to_contact_header.enable = #V80 Add account.242.custom_ua = account.242.callpark_enable = account.242.check_cseq.enable = account.242.check_to_tag.enable = account.242.hold_use_inactive = account.242.line_seize.expires = account.242.update_ack_while_dialing = account.242.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.242.always_fwd.enable =
account.242.always_fwd.target =
account.242.always_fwd.off_code =
account.242.always_fwd.on_code =
account.242.busy_fwd.enable =
account.242.busy_fwd.target =
account.242.busy_fwd.off_code =
account.242.busy_fwd.on_code =
account.242.timeout_fwd.enable =
account.242.timeout_fwd.target =
account.242.timeout_fwd.timeout =
account.242.timeout_fwd.off_code =
account.242.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1102 OF 1142
account.242.dnd.enable = account.242.dnd.on_code = account.242.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.242.reg.enable =
handset.242.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.242.xsi.user =%BWLOGIN-ID-242% account.242.xsi.password =%XSIPASSWORD-242% account.242.xsi.host =%XSP_ADDRESS% account.242.xsi.server_type = account.242.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.242.ldap.enable =
handset.242.ldap.name_filter=
handset.242.ldap.number_filter=
handset.242.ldap.host=
handset.242.ldap.port=
handset.242.ldap.base=
handset.242.ldap.user=
handset.242.ldap.password=
handset.242.ldap.max_hits=
handset.242.ldap.name_attr=
handset.242.ldap.numb_attr=
handset.242.ldap.display_name=
handset.242.ldap.version=
handset.242.ldap.call_in_lookup=
handset.242.ldap.ldap_sort=
handset.242.ldap.tls_mode=
handset.242.ldap.call_out_lookup=
handset.242.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account243 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1103 OF 1142
account.243.enable=%BWLINE-BINARY-243% account.243.label=%BWEXTENSION-243% account.243.display_name=%BWCLID-243% account.243.auth_name=%BWAUTHUSER-243% account.243.user_name=%BWLINEPORT-243% account.243.password=%BWAUTHPASSWORD-243%
#W80B ADD account.243.sip_server.template = account.243.media_transmit.enable =
account.243.alarm.template = account.243.alarm.server = account.243.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.243.sip_server.1.failback_mode =
account.243.sip_server.1.failback_timeout =
account.243.sip_server.1.register_on_enable =
account.243.sip_server.1.failback_subscribe.enable =
account.243.sip_server.1.invite_retry_counts =
account.243.sip_server.1.only_signal_with_registered =
account.243.sip_server.2.failback_mode = account.243.sip_server.2.failback_timeout = account.243.sip_server.2.register_on_enable = account.243.sip_server.2.failback_subscribe.enable = account.243.sip_server.2.invite_retry_counts = account.243.sip_server.2.only_signal_with_registered =
account.243.naptr_build = account.243.fallback.redundancy_type = account.243.fallback.timeout =
account.243.dns_cache_type = account.243.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.243.anonymous_call =
account.243.reject_anonymous_call =
account.243.send_anonymous_code =
account.243.anonymous_call_oncode =
account.243.anonymous_call_offcode =
account.243.send_anonymous_rejection_code =
account.243.anonymous_reject_oncode =
account.243.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1104 OF 1142
########################################################################## ############# account.243.codec.g722.enable = account.243.codec.g722.priority =
account.243.codec.g729.enable = account.243.codec.g729.priority =
account.243.codec.g726_16.enable = account.243.codec.g726_16.priority =
account.243.codec.g726_24.enable = account.243.codec.g726_24.priority =
account.243.codec.g726_32.enable = account.243.codec.g726_32.priority =
account.243.codec.g726_40.enable = account.243.codec.g726_40.priority =
account.243.codec.ilbc.enable = account.243.codec.ilbc.priority =
account.243.codec.pcmu.enable = account.243.codec.pcmu.priority =
account.243.codec.pcma.enable = account.243.codec.pcma.priority =
account.243.codec.opus.enable = account.243.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.243.nat.nat_traversal = account.243.nat.udp_update_enable = account.243.nat.udp_update_time = account.243.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.243.blf.subscribe_period = account.243.dtmf.type = account.243.dtmf.dtmf_payload = account.243.dtmf.info_type = account.243.100rel_enable = account.243.subscribe_register = account.243.subscribe_mwi = account.243.subscribe_mwi_expires = account.243.subscribe_mwi_to_vm = voice_mail.number.243 = %BWVOICE-PORTAL-NUMBER-243% account.243.display_mwi.enable = account.243.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1105 OF 1142
account.243.cid_source_privacy = account.243.cid_source_ppi = account.243.session_timer.enable = account.243.session_timer.expires = account.243.session_timer.refresher = account.243.enable_user_equal_phone = account.243.srtp_encryption = account.243.ptime = account.243.shared_line = %BWSHAREDLINE-BINARY-243% account.243.register_mac = account.243.register_line = account.243.reg_fail_retry_interval = account.243.reg_failed_retry_min_time = account.243.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.243.conf_type =
account.243.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-243%
account.243.sip_server_type = account.243.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.243.register_expires_overlap = account.243.subscribe_expires_overlap = account.243.auto_dial_enable = account.243.auto_dial_num = account.243.cp_source = account.243.transfer_refer_to_contact_header.enable = #V80 Add account.243.custom_ua = account.243.callpark_enable = account.243.check_cseq.enable = account.243.check_to_tag.enable = account.243.hold_use_inactive = account.243.line_seize.expires = account.243.update_ack_while_dialing = account.243.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.243.always_fwd.enable =
account.243.always_fwd.target =
account.243.always_fwd.off_code =
account.243.always_fwd.on_code =
account.243.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1106 OF 1142
account.243.busy_fwd.target = account.243.busy_fwd.off_code = account.243.busy_fwd.on_code = account.243.timeout_fwd.enable = account.243.timeout_fwd.target = account.243.timeout_fwd.timeout = account.243.timeout_fwd.off_code = account.243.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.243.dnd.enable =
account.243.dnd.on_code =
account.243.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.243.reg.enable =
handset.243.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.243.xsi.user =%BWLOGIN-ID-243% account.243.xsi.password =%XSIPASSWORD-243% account.243.xsi.host =%XSP_ADDRESS% account.243.xsi.server_type = account.243.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.243.ldap.enable =
handset.243.ldap.name_filter=
handset.243.ldap.number_filter=
handset.243.ldap.host=
handset.243.ldap.port=
handset.243.ldap.base=
handset.243.ldap.user=
handset.243.ldap.password=
handset.243.ldap.max_hits=
handset.243.ldap.name_attr=
handset.243.ldap.numb_attr=
handset.243.ldap.display_name=
handset.243.ldap.version=
handset.243.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1107 OF 1142
handset.243.ldap.ldap_sort= handset.243.ldap.tls_mode= handset.243.ldap.call_out_lookup= handset.243.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account244 Settings
##
##########################################################################
#############
account.244.enable=%BWLINE-BINARY-244% account.244.label=%BWEXTENSION-244% account.244.display_name=%BWCLID-244% account.244.auth_name=%BWAUTHUSER-244% account.244.user_name=%BWLINEPORT-244% account.244.password=%BWAUTHPASSWORD-244%
#W80B ADD account.244.sip_server.template = account.244.media_transmit.enable =
account.244.alarm.template = account.244.alarm.server = account.244.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.244.sip_server.1.failback_mode =
account.244.sip_server.1.failback_timeout =
account.244.sip_server.1.register_on_enable =
account.244.sip_server.1.failback_subscribe.enable =
account.244.sip_server.1.invite_retry_counts =
account.244.sip_server.1.only_signal_with_registered =
account.244.sip_server.2.failback_mode = account.244.sip_server.2.failback_timeout = account.244.sip_server.2.register_on_enable = account.244.sip_server.2.failback_subscribe.enable = account.244.sip_server.2.invite_retry_counts = account.244.sip_server.2.only_signal_with_registered =
account.244.naptr_build = account.244.fallback.redundancy_type = account.244.fallback.timeout =
account.244.dns_cache_type = account.244.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1108 OF 1142
account.244.anonymous_call = account.244.reject_anonymous_call = account.244.send_anonymous_code = account.244.anonymous_call_oncode = account.244.anonymous_call_offcode = account.244.send_anonymous_rejection_code = account.244.anonymous_reject_oncode = account.244.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.244.codec.g722.enable =
account.244.codec.g722.priority =
account.244.codec.g729.enable = account.244.codec.g729.priority =
account.244.codec.g726_16.enable = account.244.codec.g726_16.priority =
account.244.codec.g726_24.enable = account.244.codec.g726_24.priority =
account.244.codec.g726_32.enable = account.244.codec.g726_32.priority =
account.244.codec.g726_40.enable = account.244.codec.g726_40.priority =
account.244.codec.ilbc.enable = account.244.codec.ilbc.priority =
account.244.codec.pcmu.enable = account.244.codec.pcmu.priority =
account.244.codec.pcma.enable = account.244.codec.pcma.priority =
account.244.codec.opus.enable = account.244.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.244.nat.nat_traversal = account.244.nat.udp_update_enable = account.244.nat.udp_update_time = account.244.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1109 OF 1142
########################################################################## #############
account.244.blf.subscribe_period = account.244.dtmf.type = account.244.dtmf.dtmf_payload = account.244.dtmf.info_type = account.244.100rel_enable = account.244.subscribe_register = account.244.subscribe_mwi = account.244.subscribe_mwi_expires = account.244.subscribe_mwi_to_vm = voice_mail.number.244 = %BWVOICE-PORTAL-NUMBER-244% account.244.display_mwi.enable = account.244.cid_source = account.244.cid_source_privacy = account.244.cid_source_ppi = account.244.session_timer.enable = account.244.session_timer.expires = account.244.session_timer.refresher = account.244.enable_user_equal_phone = account.244.srtp_encryption = account.244.ptime = account.244.shared_line = %BWSHAREDLINE-BINARY-244% account.244.register_mac = account.244.register_line = account.244.reg_fail_retry_interval = account.244.reg_failed_retry_min_time = account.244.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.244.conf_type =
account.244.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-244%
account.244.sip_server_type = account.244.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.244.register_expires_overlap = account.244.subscribe_expires_overlap = account.244.auto_dial_enable = account.244.auto_dial_num = account.244.cp_source = account.244.transfer_refer_to_contact_header.enable = #V80 Add account.244.custom_ua = account.244.callpark_enable = account.244.check_cseq.enable = account.244.check_to_tag.enable = account.244.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1110 OF 1142
account.244.line_seize.expires = account.244.update_ack_while_dialing = account.244.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.244.always_fwd.enable =
account.244.always_fwd.target =
account.244.always_fwd.off_code =
account.244.always_fwd.on_code =
account.244.busy_fwd.enable =
account.244.busy_fwd.target =
account.244.busy_fwd.off_code =
account.244.busy_fwd.on_code =
account.244.timeout_fwd.enable =
account.244.timeout_fwd.target =
account.244.timeout_fwd.timeout =
account.244.timeout_fwd.off_code =
account.244.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.244.dnd.enable =
account.244.dnd.on_code =
account.244.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.244.reg.enable =
handset.244.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.244.xsi.user =%BWLOGIN-ID-244% account.244.xsi.password =%XSIPASSWORD-244% account.244.xsi.host =%XSP_ADDRESS% account.244.xsi.server_type = account.244.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1111 OF 1142
########################################################################## ############# handset.244.ldap.enable = handset.244.ldap.name_filter= handset.244.ldap.number_filter= handset.244.ldap.host= handset.244.ldap.port= handset.244.ldap.base= handset.244.ldap.user= handset.244.ldap.password= handset.244.ldap.max_hits= handset.244.ldap.name_attr= handset.244.ldap.numb_attr= handset.244.ldap.display_name= handset.244.ldap.version= handset.244.ldap.call_in_lookup= handset.244.ldap.ldap_sort= handset.244.ldap.tls_mode= handset.244.ldap.call_out_lookup= handset.244.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account245 Settings
##
##########################################################################
#############
account.245.enable=%BWLINE-BINARY-245% account.245.label=%BWEXTENSION-245% account.245.display_name=%BWCLID-245% account.245.auth_name=%BWAUTHUSER-245% account.245.user_name=%BWLINEPORT-245% account.245.password=%BWAUTHPASSWORD-245%
#W80B ADD account.245.sip_server.template = account.245.media_transmit.enable =
account.245.alarm.template = account.245.alarm.server = account.245.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.245.sip_server.1.failback_mode =
account.245.sip_server.1.failback_timeout =
account.245.sip_server.1.register_on_enable =
account.245.sip_server.1.failback_subscribe.enable =
account.245.sip_server.1.invite_retry_counts =
account.245.sip_server.1.only_signal_with_registered =
account.245.sip_server.2.failback_mode = account.245.sip_server.2.failback_timeout = account.245.sip_server.2.register_on_enable = account.245.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1112 OF 1142
account.245.sip_server.2.invite_retry_counts = account.245.sip_server.2.only_signal_with_registered =
account.245.naptr_build = account.245.fallback.redundancy_type = account.245.fallback.timeout =
account.245.dns_cache_type = account.245.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.245.anonymous_call =
account.245.reject_anonymous_call =
account.245.send_anonymous_code =
account.245.anonymous_call_oncode =
account.245.anonymous_call_offcode =
account.245.send_anonymous_rejection_code =
account.245.anonymous_reject_oncode =
account.245.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.245.codec.g722.enable =
account.245.codec.g722.priority =
account.245.codec.g729.enable = account.245.codec.g729.priority =
account.245.codec.g726_16.enable = account.245.codec.g726_16.priority =
account.245.codec.g726_24.enable = account.245.codec.g726_24.priority =
account.245.codec.g726_32.enable = account.245.codec.g726_32.priority =
account.245.codec.g726_40.enable = account.245.codec.g726_40.priority =
account.245.codec.ilbc.enable = account.245.codec.ilbc.priority =
account.245.codec.pcmu.enable = account.245.codec.pcmu.priority =
account.245.codec.pcma.enable = account.245.codec.pcma.priority =
account.245.codec.opus.enable = account.245.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1113 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.245.nat.nat_traversal = account.245.nat.udp_update_enable = account.245.nat.udp_update_time = account.245.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.245.blf.subscribe_period = account.245.dtmf.type = account.245.dtmf.dtmf_payload = account.245.dtmf.info_type = account.245.100rel_enable = account.245.subscribe_register = account.245.subscribe_mwi = account.245.subscribe_mwi_expires = account.245.subscribe_mwi_to_vm = voice_mail.number.245 = %BWVOICE-PORTAL-NUMBER-245% account.245.display_mwi.enable = account.245.cid_source = account.245.cid_source_privacy = account.245.cid_source_ppi = account.245.session_timer.enable = account.245.session_timer.expires = account.245.session_timer.refresher = account.245.enable_user_equal_phone = account.245.srtp_encryption = account.245.ptime = account.245.shared_line = %BWSHAREDLINE-BINARY-245% account.245.register_mac = account.245.register_line = account.245.reg_fail_retry_interval = account.245.reg_failed_retry_min_time = account.245.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.245.conf_type =
account.245.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-245%
account.245.sip_server_type = account.245.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1114 OF 1142
########################################################################## ############# ##DECT V81 Add
account.245.register_expires_overlap = account.245.subscribe_expires_overlap = account.245.auto_dial_enable = account.245.auto_dial_num = account.245.cp_source = account.245.transfer_refer_to_contact_header.enable = #V80 Add account.245.custom_ua = account.245.callpark_enable = account.245.check_cseq.enable = account.245.check_to_tag.enable = account.245.hold_use_inactive = account.245.line_seize.expires = account.245.update_ack_while_dialing = account.245.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.245.always_fwd.enable =
account.245.always_fwd.target =
account.245.always_fwd.off_code =
account.245.always_fwd.on_code =
account.245.busy_fwd.enable =
account.245.busy_fwd.target =
account.245.busy_fwd.off_code =
account.245.busy_fwd.on_code =
account.245.timeout_fwd.enable =
account.245.timeout_fwd.target =
account.245.timeout_fwd.timeout =
account.245.timeout_fwd.off_code =
account.245.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.245.dnd.enable =
account.245.dnd.on_code =
account.245.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.245.reg.enable =
handset.245.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1115 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.245.xsi.user =%BWLOGIN-ID-245% account.245.xsi.password =%XSIPASSWORD-245% account.245.xsi.host =%XSP_ADDRESS% account.245.xsi.server_type = account.245.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.245.ldap.enable =
handset.245.ldap.name_filter=
handset.245.ldap.number_filter=
handset.245.ldap.host=
handset.245.ldap.port=
handset.245.ldap.base=
handset.245.ldap.user=
handset.245.ldap.password=
handset.245.ldap.max_hits=
handset.245.ldap.name_attr=
handset.245.ldap.numb_attr=
handset.245.ldap.display_name=
handset.245.ldap.version=
handset.245.ldap.call_in_lookup=
handset.245.ldap.ldap_sort=
handset.245.ldap.tls_mode=
handset.245.ldap.call_out_lookup=
handset.245.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account246 Settings
##
##########################################################################
#############
account.246.enable=%BWLINE-BINARY-246% account.246.label=%BWEXTENSION-246% account.246.display_name=%BWCLID-246% account.246.auth_name=%BWAUTHUSER-246% account.246.user_name=%BWLINEPORT-246% account.246.password=%BWAUTHPASSWORD-246%
#W80B ADD account.246.sip_server.template = account.246.media_transmit.enable =
account.246.alarm.template = account.246.alarm.server = account.246.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1116 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.246.sip_server.1.failback_mode =
account.246.sip_server.1.failback_timeout =
account.246.sip_server.1.register_on_enable =
account.246.sip_server.1.failback_subscribe.enable =
account.246.sip_server.1.invite_retry_counts =
account.246.sip_server.1.only_signal_with_registered =
account.246.sip_server.2.failback_mode = account.246.sip_server.2.failback_timeout = account.246.sip_server.2.register_on_enable = account.246.sip_server.2.failback_subscribe.enable = account.246.sip_server.2.invite_retry_counts = account.246.sip_server.2.only_signal_with_registered =
account.246.naptr_build = account.246.fallback.redundancy_type = account.246.fallback.timeout =
account.246.dns_cache_type = account.246.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.246.anonymous_call =
account.246.reject_anonymous_call =
account.246.send_anonymous_code =
account.246.anonymous_call_oncode =
account.246.anonymous_call_offcode =
account.246.send_anonymous_rejection_code =
account.246.anonymous_reject_oncode =
account.246.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.246.codec.g722.enable =
account.246.codec.g722.priority =
account.246.codec.g729.enable = account.246.codec.g729.priority =
account.246.codec.g726_16.enable = account.246.codec.g726_16.priority =
account.246.codec.g726_24.enable = account.246.codec.g726_24.priority =
account.246.codec.g726_32.enable = account.246.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1117 OF 1142
account.246.codec.g726_40.enable = account.246.codec.g726_40.priority =
account.246.codec.ilbc.enable = account.246.codec.ilbc.priority =
account.246.codec.pcmu.enable = account.246.codec.pcmu.priority =
account.246.codec.pcma.enable = account.246.codec.pcma.priority =
account.246.codec.opus.enable = account.246.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.246.nat.nat_traversal = account.246.nat.udp_update_enable = account.246.nat.udp_update_time = account.246.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.246.blf.subscribe_period = account.246.dtmf.type = account.246.dtmf.dtmf_payload = account.246.dtmf.info_type = account.246.100rel_enable = account.246.subscribe_register = account.246.subscribe_mwi = account.246.subscribe_mwi_expires = account.246.subscribe_mwi_to_vm = voice_mail.number.246 = %BWVOICE-PORTAL-NUMBER-246% account.246.display_mwi.enable = account.246.cid_source = account.246.cid_source_privacy = account.246.cid_source_ppi = account.246.session_timer.enable = account.246.session_timer.expires = account.246.session_timer.refresher = account.246.enable_user_equal_phone = account.246.srtp_encryption = account.246.ptime = account.246.shared_line = %BWSHAREDLINE-BINARY-246% account.246.register_mac = account.246.register_line = account.246.reg_fail_retry_interval = account.246.reg_failed_retry_min_time = account.246.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1118 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.246.conf_type =
account.246.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-246%
account.246.sip_server_type = account.246.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.246.register_expires_overlap = account.246.subscribe_expires_overlap = account.246.auto_dial_enable = account.246.auto_dial_num = account.246.cp_source = account.246.transfer_refer_to_contact_header.enable = #V80 Add account.246.custom_ua = account.246.callpark_enable = account.246.check_cseq.enable = account.246.check_to_tag.enable = account.246.hold_use_inactive = account.246.line_seize.expires = account.246.update_ack_while_dialing = account.246.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.246.always_fwd.enable =
account.246.always_fwd.target =
account.246.always_fwd.off_code =
account.246.always_fwd.on_code =
account.246.busy_fwd.enable =
account.246.busy_fwd.target =
account.246.busy_fwd.off_code =
account.246.busy_fwd.on_code =
account.246.timeout_fwd.enable =
account.246.timeout_fwd.target =
account.246.timeout_fwd.timeout =
account.246.timeout_fwd.off_code =
account.246.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1119 OF 1142
account.246.dnd.enable = account.246.dnd.on_code = account.246.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.246.reg.enable =
handset.246.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.246.xsi.user =%BWLOGIN-ID-246% account.246.xsi.password =%XSIPASSWORD-246% account.246.xsi.host =%XSP_ADDRESS% account.246.xsi.server_type = account.246.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.246.ldap.enable =
handset.246.ldap.name_filter=
handset.246.ldap.number_filter=
handset.246.ldap.host=
handset.246.ldap.port=
handset.246.ldap.base=
handset.246.ldap.user=
handset.246.ldap.password=
handset.246.ldap.max_hits=
handset.246.ldap.name_attr=
handset.246.ldap.numb_attr=
handset.246.ldap.display_name=
handset.246.ldap.version=
handset.246.ldap.call_in_lookup=
handset.246.ldap.ldap_sort=
handset.246.ldap.tls_mode=
handset.246.ldap.call_out_lookup=
handset.246.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account247 Settings
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1120 OF 1142
account.247.enable=%BWLINE-BINARY-247% account.247.label=%BWEXTENSION-247% account.247.display_name=%BWCLID-247% account.247.auth_name=%BWAUTHUSER-247% account.247.user_name=%BWLINEPORT-247% account.247.password=%BWAUTHPASSWORD-247%
#W80B ADD account.247.sip_server.template = account.247.media_transmit.enable =
account.247.alarm.template = account.247.alarm.server = account.247.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.247.sip_server.1.failback_mode =
account.247.sip_server.1.failback_timeout =
account.247.sip_server.1.register_on_enable =
account.247.sip_server.1.failback_subscribe.enable =
account.247.sip_server.1.invite_retry_counts =
account.247.sip_server.1.only_signal_with_registered =
account.247.sip_server.2.failback_mode = account.247.sip_server.2.failback_timeout = account.247.sip_server.2.register_on_enable = account.247.sip_server.2.failback_subscribe.enable = account.247.sip_server.2.invite_retry_counts = account.247.sip_server.2.only_signal_with_registered =
account.247.naptr_build = account.247.fallback.redundancy_type = account.247.fallback.timeout =
account.247.dns_cache_type = account.247.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.247.anonymous_call =
account.247.reject_anonymous_call =
account.247.send_anonymous_code =
account.247.anonymous_call_oncode =
account.247.anonymous_call_offcode =
account.247.send_anonymous_rejection_code =
account.247.anonymous_reject_oncode =
account.247.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1121 OF 1142
########################################################################## ############# account.247.codec.g722.enable = account.247.codec.g722.priority =
account.247.codec.g729.enable = account.247.codec.g729.priority =
account.247.codec.g726_16.enable = account.247.codec.g726_16.priority =
account.247.codec.g726_24.enable = account.247.codec.g726_24.priority =
account.247.codec.g726_32.enable = account.247.codec.g726_32.priority =
account.247.codec.g726_40.enable = account.247.codec.g726_40.priority =
account.247.codec.ilbc.enable = account.247.codec.ilbc.priority =
account.247.codec.pcmu.enable = account.247.codec.pcmu.priority =
account.247.codec.pcma.enable = account.247.codec.pcma.priority =
account.247.codec.opus.enable = account.247.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.247.nat.nat_traversal = account.247.nat.udp_update_enable = account.247.nat.udp_update_time = account.247.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.247.blf.subscribe_period = account.247.dtmf.type = account.247.dtmf.dtmf_payload = account.247.dtmf.info_type = account.247.100rel_enable = account.247.subscribe_register = account.247.subscribe_mwi = account.247.subscribe_mwi_expires = account.247.subscribe_mwi_to_vm = voice_mail.number.247 = %BWVOICE-PORTAL-NUMBER-247% account.247.display_mwi.enable = account.247.cid_source =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1122 OF 1142
account.247.cid_source_privacy = account.247.cid_source_ppi = account.247.session_timer.enable = account.247.session_timer.expires = account.247.session_timer.refresher = account.247.enable_user_equal_phone = account.247.srtp_encryption = account.247.ptime = account.247.shared_line = %BWSHAREDLINE-BINARY-247% account.247.register_mac = account.247.register_line = account.247.reg_fail_retry_interval = account.247.reg_failed_retry_min_time = account.247.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.247.conf_type =
account.247.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-247%
account.247.sip_server_type = account.247.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.247.register_expires_overlap = account.247.subscribe_expires_overlap = account.247.auto_dial_enable = account.247.auto_dial_num = account.247.cp_source = account.247.transfer_refer_to_contact_header.enable = #V80 Add account.247.custom_ua = account.247.callpark_enable = account.247.check_cseq.enable = account.247.check_to_tag.enable = account.247.hold_use_inactive = account.247.line_seize.expires = account.247.update_ack_while_dialing = account.247.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.247.always_fwd.enable =
account.247.always_fwd.target =
account.247.always_fwd.off_code =
account.247.always_fwd.on_code =
account.247.busy_fwd.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1123 OF 1142
account.247.busy_fwd.target = account.247.busy_fwd.off_code = account.247.busy_fwd.on_code = account.247.timeout_fwd.enable = account.247.timeout_fwd.target = account.247.timeout_fwd.timeout = account.247.timeout_fwd.off_code = account.247.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.247.dnd.enable =
account.247.dnd.on_code =
account.247.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.247.reg.enable =
handset.247.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.247.xsi.user =%BWLOGIN-ID-247% account.247.xsi.password =%XSIPASSWORD-247% account.247.xsi.host =%XSP_ADDRESS% account.247.xsi.server_type = account.247.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.247.ldap.enable =
handset.247.ldap.name_filter=
handset.247.ldap.number_filter=
handset.247.ldap.host=
handset.247.ldap.port=
handset.247.ldap.base=
handset.247.ldap.user=
handset.247.ldap.password=
handset.247.ldap.max_hits=
handset.247.ldap.name_attr=
handset.247.ldap.numb_attr=
handset.247.ldap.display_name=
handset.247.ldap.version=
handset.247.ldap.call_in_lookup=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1124 OF 1142
handset.247.ldap.ldap_sort= handset.247.ldap.tls_mode= handset.247.ldap.call_out_lookup= handset.247.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account248 Settings
##
##########################################################################
#############
account.248.enable=%BWLINE-BINARY-248% account.248.label=%BWEXTENSION-248% account.248.display_name=%BWCLID-248% account.248.auth_name=%BWAUTHUSER-248% account.248.user_name=%BWLINEPORT-248% account.248.password=%BWAUTHPASSWORD-248%
#W80B ADD account.248.sip_server.template = account.248.media_transmit.enable =
account.248.alarm.template = account.248.alarm.server = account.248.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.248.sip_server.1.failback_mode =
account.248.sip_server.1.failback_timeout =
account.248.sip_server.1.register_on_enable =
account.248.sip_server.1.failback_subscribe.enable =
account.248.sip_server.1.invite_retry_counts =
account.248.sip_server.1.only_signal_with_registered =
account.248.sip_server.2.failback_mode = account.248.sip_server.2.failback_timeout = account.248.sip_server.2.register_on_enable = account.248.sip_server.2.failback_subscribe.enable = account.248.sip_server.2.invite_retry_counts = account.248.sip_server.2.only_signal_with_registered =
account.248.naptr_build = account.248.fallback.redundancy_type = account.248.fallback.timeout =
account.248.dns_cache_type = account.248.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1125 OF 1142
account.248.anonymous_call = account.248.reject_anonymous_call = account.248.send_anonymous_code = account.248.anonymous_call_oncode = account.248.anonymous_call_offcode = account.248.send_anonymous_rejection_code = account.248.anonymous_reject_oncode = account.248.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.248.codec.g722.enable =
account.248.codec.g722.priority =
account.248.codec.g729.enable = account.248.codec.g729.priority =
account.248.codec.g726_16.enable = account.248.codec.g726_16.priority =
account.248.codec.g726_24.enable = account.248.codec.g726_24.priority =
account.248.codec.g726_32.enable = account.248.codec.g726_32.priority =
account.248.codec.g726_40.enable = account.248.codec.g726_40.priority =
account.248.codec.ilbc.enable = account.248.codec.ilbc.priority =
account.248.codec.pcmu.enable = account.248.codec.pcmu.priority =
account.248.codec.pcma.enable = account.248.codec.pcma.priority =
account.248.codec.opus.enable = account.248.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.248.nat.nat_traversal = account.248.nat.udp_update_enable = account.248.nat.udp_update_time = account.248.nat.rport =
##########################################################################
#############
##
Register Advanced
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1126 OF 1142
########################################################################## #############
account.248.blf.subscribe_period = account.248.dtmf.type = account.248.dtmf.dtmf_payload = account.248.dtmf.info_type = account.248.100rel_enable = account.248.subscribe_register = account.248.subscribe_mwi = account.248.subscribe_mwi_expires = account.248.subscribe_mwi_to_vm = voice_mail.number.248 = %BWVOICE-PORTAL-NUMBER-248% account.248.display_mwi.enable = account.248.cid_source = account.248.cid_source_privacy = account.248.cid_source_ppi = account.248.session_timer.enable = account.248.session_timer.expires = account.248.session_timer.refresher = account.248.enable_user_equal_phone = account.248.srtp_encryption = account.248.ptime = account.248.shared_line = %BWSHAREDLINE-BINARY-248% account.248.register_mac = account.248.register_line = account.248.reg_fail_retry_interval = account.248.reg_failed_retry_min_time = account.248.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.248.conf_type =
account.248.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-248%
account.248.sip_server_type = account.248.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.248.register_expires_overlap = account.248.subscribe_expires_overlap = account.248.auto_dial_enable = account.248.auto_dial_num = account.248.cp_source = account.248.transfer_refer_to_contact_header.enable = #V80 Add account.248.custom_ua = account.248.callpark_enable = account.248.check_cseq.enable = account.248.check_to_tag.enable = account.248.hold_use_inactive =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1127 OF 1142
account.248.line_seize.expires = account.248.update_ack_while_dialing = account.248.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.248.always_fwd.enable =
account.248.always_fwd.target =
account.248.always_fwd.off_code =
account.248.always_fwd.on_code =
account.248.busy_fwd.enable =
account.248.busy_fwd.target =
account.248.busy_fwd.off_code =
account.248.busy_fwd.on_code =
account.248.timeout_fwd.enable =
account.248.timeout_fwd.target =
account.248.timeout_fwd.timeout =
account.248.timeout_fwd.off_code =
account.248.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.248.dnd.enable =
account.248.dnd.on_code =
account.248.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.248.reg.enable =
handset.248.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.248.xsi.user =%BWLOGIN-ID-248% account.248.xsi.password =%XSIPASSWORD-248% account.248.xsi.host =%XSP_ADDRESS% account.248.xsi.server_type = account.248.xsi.port =
##########################################################################
#############
##
LADP
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1128 OF 1142
########################################################################## ############# handset.248.ldap.enable = handset.248.ldap.name_filter= handset.248.ldap.number_filter= handset.248.ldap.host= handset.248.ldap.port= handset.248.ldap.base= handset.248.ldap.user= handset.248.ldap.password= handset.248.ldap.max_hits= handset.248.ldap.name_attr= handset.248.ldap.numb_attr= handset.248.ldap.display_name= handset.248.ldap.version= handset.248.ldap.call_in_lookup= handset.248.ldap.ldap_sort= handset.248.ldap.tls_mode= handset.248.ldap.call_out_lookup= handset.248.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account249 Settings
##
##########################################################################
#############
account.249.enable=%BWLINE-BINARY-249% account.249.label=%BWEXTENSION-249% account.249.display_name=%BWCLID-249% account.249.auth_name=%BWAUTHUSER-249% account.249.user_name=%BWLINEPORT-249% account.249.password=%BWAUTHPASSWORD-249%
#W80B ADD account.249.sip_server.template = account.249.media_transmit.enable =
account.249.alarm.template = account.249.alarm.server = account.249.alarm.number =
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.249.sip_server.1.failback_mode =
account.249.sip_server.1.failback_timeout =
account.249.sip_server.1.register_on_enable =
account.249.sip_server.1.failback_subscribe.enable =
account.249.sip_server.1.invite_retry_counts =
account.249.sip_server.1.only_signal_with_registered =
account.249.sip_server.2.failback_mode = account.249.sip_server.2.failback_timeout = account.249.sip_server.2.register_on_enable = account.249.sip_server.2.failback_subscribe.enable =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1129 OF 1142
account.249.sip_server.2.invite_retry_counts = account.249.sip_server.2.only_signal_with_registered =
account.249.naptr_build = account.249.fallback.redundancy_type = account.249.fallback.timeout =
account.249.dns_cache_type = account.249.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.249.anonymous_call =
account.249.reject_anonymous_call =
account.249.send_anonymous_code =
account.249.anonymous_call_oncode =
account.249.anonymous_call_offcode =
account.249.send_anonymous_rejection_code =
account.249.anonymous_reject_oncode =
account.249.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.249.codec.g722.enable =
account.249.codec.g722.priority =
account.249.codec.g729.enable = account.249.codec.g729.priority =
account.249.codec.g726_16.enable = account.249.codec.g726_16.priority =
account.249.codec.g726_24.enable = account.249.codec.g726_24.priority =
account.249.codec.g726_32.enable = account.249.codec.g726_32.priority =
account.249.codec.g726_40.enable = account.249.codec.g726_40.priority =
account.249.codec.ilbc.enable = account.249.codec.ilbc.priority =
account.249.codec.pcmu.enable = account.249.codec.pcmu.priority =
account.249.codec.pcma.enable = account.249.codec.pcma.priority =
account.249.codec.opus.enable = account.249.codec.opus.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1130 OF 1142
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.249.nat.nat_traversal = account.249.nat.udp_update_enable = account.249.nat.udp_update_time = account.249.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.249.blf.subscribe_period = account.249.dtmf.type = account.249.dtmf.dtmf_payload = account.249.dtmf.info_type = account.249.100rel_enable = account.249.subscribe_register = account.249.subscribe_mwi = account.249.subscribe_mwi_expires = account.249.subscribe_mwi_to_vm = voice_mail.number.249 = %BWVOICE-PORTAL-NUMBER-249% account.249.display_mwi.enable = account.249.cid_source = account.249.cid_source_privacy = account.249.cid_source_ppi = account.249.session_timer.enable = account.249.session_timer.expires = account.249.session_timer.refresher = account.249.enable_user_equal_phone = account.249.srtp_encryption = account.249.ptime = account.249.shared_line = %BWSHAREDLINE-BINARY-249% account.249.register_mac = account.249.register_line = account.249.reg_fail_retry_interval = account.249.reg_failed_retry_min_time = account.249.reg_failed_retry_max_time =
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.249.conf_type =
account.249.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-249%
account.249.sip_server_type = account.249.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1131 OF 1142
########################################################################## ############# ##DECT V81 Add
account.249.register_expires_overlap = account.249.subscribe_expires_overlap = account.249.auto_dial_enable = account.249.auto_dial_num = account.249.cp_source = account.249.transfer_refer_to_contact_header.enable = #V80 Add account.249.custom_ua = account.249.callpark_enable = account.249.check_cseq.enable = account.249.check_to_tag.enable = account.249.hold_use_inactive = account.249.line_seize.expires = account.249.update_ack_while_dialing = account.249.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.249.always_fwd.enable =
account.249.always_fwd.target =
account.249.always_fwd.off_code =
account.249.always_fwd.on_code =
account.249.busy_fwd.enable =
account.249.busy_fwd.target =
account.249.busy_fwd.off_code =
account.249.busy_fwd.on_code =
account.249.timeout_fwd.enable =
account.249.timeout_fwd.target =
account.249.timeout_fwd.timeout =
account.249.timeout_fwd.off_code =
account.249.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
account.249.dnd.enable =
account.249.dnd.on_code =
account.249.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.249.reg.enable =
handset.249.ipui =
########################################################################## #############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1132 OF 1142
##
Broadsoft XSI
##
##########################################################################
#############
account.249.xsi.user =%BWLOGIN-ID-249% account.249.xsi.password =%XSIPASSWORD-249% account.249.xsi.host =%XSP_ADDRESS% account.249.xsi.server_type = account.249.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.249.ldap.enable =
handset.249.ldap.name_filter=
handset.249.ldap.number_filter=
handset.249.ldap.host=
handset.249.ldap.port=
handset.249.ldap.base=
handset.249.ldap.user=
handset.249.ldap.password=
handset.249.ldap.max_hits=
handset.249.ldap.name_attr=
handset.249.ldap.numb_attr=
handset.249.ldap.display_name=
handset.249.ldap.version=
handset.249.ldap.call_in_lookup=
handset.249.ldap.ldap_sort=
handset.249.ldap.tls_mode=
handset.249.ldap.call_out_lookup=
handset.249.ldap.incoming_call_special_search.enable=
##########################################################################
#############
##
Account250 Settings
##
##########################################################################
#############
account.250.enable=%BWLINE-BINARY-250% account.250.label=%BWEXTENSION-250% account.250.display_name=%BWCLID-250% account.250.auth_name=%BWAUTHUSER-250% account.250.user_name=%BWLINEPORT-250% account.250.password=%BWAUTHPASSWORD-250%
#W80B ADD account.250.sip_server.template = account.250.media_transmit.enable =
account.250.alarm.template = account.250.alarm.server = account.250.alarm.number =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1133 OF 1142
##########################################################################
#############
##
Failback
##
##########################################################################
#############
account.250.sip_server.1.failback_mode =
account.250.sip_server.1.failback_timeout =
account.250.sip_server.1.register_on_enable =
account.250.sip_server.1.failback_subscribe.enable =
account.250.sip_server.1.invite_retry_counts =
account.250.sip_server.1.only_signal_with_registered =
account.250.sip_server.2.failback_mode = account.250.sip_server.2.failback_timeout = account.250.sip_server.2.register_on_enable = account.250.sip_server.2.failback_subscribe.enable = account.250.sip_server.2.invite_retry_counts = account.250.sip_server.2.only_signal_with_registered =
account.250.naptr_build = account.250.fallback.redundancy_type = account.250.fallback.timeout =
account.250.dns_cache_type = account.250.static_cache_pri = %STATIC-CACHE-PRI%
##########################################################################
#############
##
Basic
##
##########################################################################
#############
account.250.anonymous_call =
account.250.reject_anonymous_call =
account.250.send_anonymous_code =
account.250.anonymous_call_oncode =
account.250.anonymous_call_offcode =
account.250.send_anonymous_rejection_code =
account.250.anonymous_reject_oncode =
account.250.anonymous_reject_offcode =
##########################################################################
#############
##
Codec
##
##########################################################################
#############
account.250.codec.g722.enable =
account.250.codec.g722.priority =
account.250.codec.g729.enable = account.250.codec.g729.priority =
account.250.codec.g726_16.enable = account.250.codec.g726_16.priority =
account.250.codec.g726_24.enable = account.250.codec.g726_24.priority =
account.250.codec.g726_32.enable = account.250.codec.g726_32.priority =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1134 OF 1142
account.250.codec.g726_40.enable = account.250.codec.g726_40.priority =
account.250.codec.ilbc.enable = account.250.codec.ilbc.priority =
account.250.codec.pcmu.enable = account.250.codec.pcmu.priority =
account.250.codec.pcma.enable = account.250.codec.pcma.priority =
account.250.codec.opus.enable = account.250.codec.opus.priority =
##########################################################################
#############
##
NAT Settings
##
##########################################################################
#############
account.250.nat.nat_traversal = account.250.nat.udp_update_enable = account.250.nat.udp_update_time = account.250.nat.rport =
##########################################################################
#############
##
Register Advanced
##
##########################################################################
#############
account.250.blf.subscribe_period = account.250.dtmf.type = account.250.dtmf.dtmf_payload = account.250.dtmf.info_type = account.250.100rel_enable = account.250.subscribe_register = account.250.subscribe_mwi = account.250.subscribe_mwi_expires = account.250.subscribe_mwi_to_vm = voice_mail.number.250 = %BWVOICE-PORTAL-NUMBER-250% account.250.display_mwi.enable = account.250.cid_source = account.250.cid_source_privacy = account.250.cid_source_ppi = account.250.session_timer.enable = account.250.session_timer.expires = account.250.session_timer.refresher = account.250.enable_user_equal_phone = account.250.srtp_encryption = account.250.ptime = account.250.shared_line = %BWSHAREDLINE-BINARY-250% account.250.register_mac = account.250.register_line = account.250.reg_fail_retry_interval = account.250.reg_failed_retry_min_time = account.250.reg_failed_retry_max_time =
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1135 OF 1142
##########################################################################
#############
##
Network Conference
##
##########################################################################
#############
account.250.conf_type =
account.250.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-250%
account.250.sip_server_type = account.250.unregister_on_reboot =
##########################################################################
#############
##
Register Other
##
##########################################################################
#############
##DECT V81 Add
account.250.register_expires_overlap = account.250.subscribe_expires_overlap = account.250.auto_dial_enable = account.250.auto_dial_num = account.250.cp_source = account.250.transfer_refer_to_contact_header.enable = #V80 Add account.250.custom_ua = account.250.callpark_enable = account.250.check_cseq.enable = account.250.check_to_tag.enable = account.250.hold_use_inactive = account.250.line_seize.expires = account.250.update_ack_while_dialing = account.250.sub_fail_retry_interval =
##########################################################################
#############
##
Call Forward
##
##########################################################################
#############
account.250.always_fwd.enable =
account.250.always_fwd.target =
account.250.always_fwd.off_code =
account.250.always_fwd.on_code =
account.250.busy_fwd.enable =
account.250.busy_fwd.target =
account.250.busy_fwd.off_code =
account.250.busy_fwd.on_code =
account.250.timeout_fwd.enable =
account.250.timeout_fwd.target =
account.250.timeout_fwd.timeout =
account.250.timeout_fwd.off_code =
account.250.timeout_fwd.on_code =
##########################################################################
#############
##
DND
##
##########################################################################
#############
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1136 OF 1142
account.250.dnd.enable = account.250.dnd.on_code = account.250.dnd.off_code =
##########################################################################
#############
##
IPUI Registration
##
##########################################################################
#############
handset.250.reg.enable =
handset.250.ipui =
##########################################################################
#############
##
Broadsoft XSI
##
##########################################################################
#############
account.250.xsi.user =%BWLOGIN-ID-250% account.250.xsi.password =%XSIPASSWORD-250% account.250.xsi.host =%XSP_ADDRESS% account.250.xsi.server_type = account.250.xsi.port =
##########################################################################
#############
##
LADP
##
##########################################################################
#############
handset.250.ldap.enable =
handset.250.ldap.name_filter=
handset.250.ldap.number_filter=
handset.250.ldap.host=
handset.250.ldap.port=
handset.250.ldap.base=
handset.250.ldap.user=
handset.250.ldap.password=
handset.250.ldap.max_hits=
handset.250.ldap.name_attr=
handset.250.ldap.numb_attr=
handset.250.ldap.display_name=
handset.250.ldap.version=
handset.250.ldap.call_in_lookup=
handset.250.ldap.ldap_sort=
handset.250.ldap.tls_mode=
handset.250.ldap.call_out_lookup=
handset.250.ldap.incoming_call_special_search.enable=
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1137 OF 1142
Default-System File: y000000000130.cfg.def file
NOTE: This is an example file and it should be used for reference only.
#!version:1.0.0.1 auto_provision.server.url = http://ylxsp.yealink.com:80/dms/Yealink-W90B/ #auto_provision.server.url = http://%BWDEVICEACCESSFQDN%:%BWDEVICEACCESSPORT%/%BWDMSCONTEXT%/%BWDEVICEA CCESSURI%
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1138 OF 1142
Appendix B: % TIMEZONENAME% Values
Tim e Zone -11:00 -10:00 -10:00 -09:00 -08:00 -08:00 -08:00 -07:00 -07:00 -07:00 -07:00 -06:00 -06:00 -06:00 -06:00 -05:00 -05:00 -05:00 -05:00 -04:30 -04:00 -04:00 -04:00 -04:00 -04:00 -04:00 -03:30 -03:00 -03:00 -03:00 -03:00 -02:00 -01:00
Tim e Zone Nam e Samoa United States-Haw aii-Aleutian United States-Alaska-Aleutian United States-Alaska Time Canada (Vancouver, Whitehorse) Mexico (Tijuana, Mexicali) United States-Pacific Time Canada (Edmonton, Calgary) Mexico (Mazatlán, Chihuahua) United States-Mountain Time United States-MST no DST Canada-Manitoba (Winnipeg) Chile (Easter Islands) Mexico (Mexico City, Acapulco) United States-Central Time Bahamas (Nassau) Canada (Montreal, Ottaw a, Quebec) Cuba (Havana) United States-Eastern Time Venezuela (Caracas) Canada (Halifax, Saint John) Chile (Santiago) Paraguay (Asuncion) United Kingdom-Bermuda (Bermuda) United Kingdom (Falkland Islands) Trinidad and Tobago Canada (New foundland, St. Johns) Denmark-Greenland (Nuuk) Argentina (Buenos Aires) Brazil (no DST) Brazil (DST) Brazil (no DST) Portugal (Azores)
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1139 OF 1142
Tim e Zone 0 0 0 0 0 0 0 0 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +01:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00 +02:00
Tim e Zone Nam e GMT Greenland Denmark-Faroe Islands (Torshavn) Ireland (Dublin) Portugal (Lisbon, Porto, Funchal) Spain-Canary Islands (Las Palmas) Administrator's Guide for SIP-W90B IP DECT PHONEs United Kingdom (London) Morocco Albania (Tirana) Austria (Vienna) Belgium (Brussels) Caicos Chad Croatia (Zagreb) Czech Republic (Prague) Denmark (Copenhagen) France (Paris) Germany (Berlin) Hungary (Budapest) Italy (Rome) Luxembourg (Luxembourg) Macedonia (Skopje) Netherlands (Amsterdam) Namibia (Windhoek) Estonia (Tallinn) Finland (Helsinki) Gaza Strip (Gaza) Greece (Athens) Jordan (Amman) Latvia (Riga) Lebanon (Beirut) Moldova (Kishinev) Russia (Kaliningrad) Romania (Bucharest) Turkey (Ankara) Ukraine (Kyiv, Odessa)
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1140 OF 1142
Tim e Zone +03:00 +03:00 +03:00 +03:30 +04:00 +04:00 +04:00 +04:00 +04:00 +04:30 +05:00 +05:00 +05:00 +05:00 +05:30 +06:00 +06:00 +07:00 +07:00 +08:00 +08:00 +08:00 +09:00 +09:00 +09:30 +09:30 +10:00 +10:00 +10:00 +10:00 +10:30 +11:00 +12:00 +12:45
Tim e Zone Nam e East Africa Time Iraq (Baghdad) Russia (Moscow) Iran (Teheran) Armenia (Yerevan) Azerbaijan (Baku) Georgia (Tbilisi) Kazakhstan (Aktau) Russia (Samara) A f ghanis tan Kazakhstan (Aktobe) Kyrgyzstan (Bishkek) Pakistan (Islamabad) Russia (Chelyabinsk) India (Calcutta) Kazakhstan (Astana, Almaty) Russia (Novosibirsk, Omsk) Russia (Krasnoyarsk) Thailand (Bangkok) China (Beijing) Singapore (Singapore) Australia (Perth) Korea (Seoul) Japan (Tokyo) Australia (Adelaide) Australia (Darw in) Australia (Sydney, Melbourne, Canberra) Australia (Brisbane) Australia (Hobart) Russia (Vladivostok) Australia (Lord How e Islands) New Caledonia (Nouméa) New Zealand (Wellington, Auckland) New Zealand (Chatham Islands)
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1141 OF 1142
References
[1] Yealink, Inc. 2017. Yealink W90B IP DECT PHONE User Guide, Release 81. Available from Yealink at http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
[2] Cisco Systems, Inc. 2018. Cisco BroadWorks Device Management Configuration Guide, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[3] Cisco Systems, Inc. 2018. Cisco BroadWorks Redundancy Guide, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[4] Cisco Systems, Inc. 2018. Cisco BroadWorks SIP Access Interface Interwork ing Guide, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[5] Cisco Systems, Inc. 2018. Cisco BroadWorks SIP Phone Interoperability Test Plan, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[6] Cisco Systems, Inc. 2018. Cisco BroadWorks SIP Phone XSI and XMPP Test Plan, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[7] Cisco Systems, Inc. 2018. Cisco BroadWorks Device Management Interoperability Test Plan, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[8] Cisco Systems, Inc. 2018. Cisco BroadWorks CPE Kit Usage Guide, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
[9] Cisco Systems, Inc. 2018. Cisco BroadWorks SIP Phone Functional Test Plan, Release 22.0. Available from BroadSoft at xchange.broadsoft.com.
BROADSOFT PARTNER CONFI GURATION GUI DE YEALINK W90B IP DECT PHONE ©2021 CISCO SYSTEMS INC.
DOCUMENT NUMBER PAGE 1142 OF 1142