PUDU MT1 Max Accessories
The PUDU MT1 Max utilizes various consumables and accessories to maintain optimal performance. The following table details available accessories:
| No. | Name | Spec. | Description | Robots |
|---|---|---|---|---|
| 1 | Sweep Side Brush | 2 Pcs, Nylon Bristles, Quick Detatch | Suitable for sweeping most types of floors and waste; MT1 Max standard consumables, suitable for common hard surfaces, such as polished concrete, ceramic tiles, terrazzo, anti-slip tiles, wooden floors, PVC, and epoxy resin. | MT1 series, MT1 Max |
| 2 | Sweep Rolling Brush | 1 Pcs, Nylon Bristles, Side Drawn, removable | Filter airborne dust while sweeping. In areas with significant dust, manual/auto dust scraping or disassembly for cleaning should be performed frequently, and replacements should be made when necessary. | MT1, MT1 Max |
| 3 | Air Filter | 2pcs, F9 Filter Level, Non-Woven Filter Paper, Metal Frame | Filter airborne dust while sweeping. In areas with significant dust, manual/auto dust scraping or disassembly for cleaning should be performed frequently, and replacements should be made when necessary. | MT1 series |
| 4 | Waste Container Sealing Rubber | 2pcs, Black | Fixed with screws at the front of the waste container and should be replaced regularly to prevent deformation of the rubber, which could result in small debris not being swept into the trash box. | MT1 series |
| 5 | Sweep Rolling Brush Sealing Rubber | 2pcs, Black | Replace by pulling from the side of the roller brush cover. Regular replacement is necessary to avoid any loss of effectiveness in collecting small debris due to deformation of the rubber. | MT1 series |
| 6 | MT1 Vac Side Brush (antistatic) | 1 pairs (2 Pcs), Nylon Bristles, antistatic, Quick Detatch | Suitable for cleaning garbage on most floors and short-haired carpets. | MT1 series |
| 7 | Charging Station | Accessory, MTI series, MSBC01 | Automatic charging for MT1. | MT1 series |
| 8 | 12 V to DC Power Supply Cable | Accessory, MTI series, external device power cable, 12 V, with DC male connector | 12V DC male connector cable, used for powering external third-party devices. | MT1 series |
| 9 | Warning Flag | Accessory, MTI series, safety warning flag, silicone flag surface, orange, with flagpole | Quick-install design for warning purposes. | MT1 series |
| 10 | Elevator Control System | Accessory, MTI series, elevator control system, 2.4g Lora, with aerial | 2.4G elevator control retrofit kit for machine end. | MT1 series |
| 11 | Elevated Warning Light | Accessory, MTI series, red-green dual indicators with buzzer and built-in cable | Raised design with prominent audio-visual alerts ensures effective warning. | MT1 series |
