Stealth VR USB-C Power & Link Cable

System Requirements

PC Recommended Specifications

Processor: Intel i5-4590 / AMD Ryzen 5 1500X (or greater)

Graphics Card: NVIDIA GTX 1050 Ti / AMD Radeon RX 470 (or greater)

Memory: 8 GB+ RAM

Operating System: Windows 10, Windows 11

USB Ports: 3.0 USB port

Minimum Requirements for Link Cable

Processor: Intel i5-4590 / AMD Ryzen 5 1500X (or greater)

Graphics Card: NVIDIA GTX 1050 Ti / AMD Radeon RX 470 (or greater)

Alternative Graphics Card: NVIDIA GTX 960 4GB / AMD Radeon R9 290 (or greater)

Memory: 8GB + RAM

Operating System: Windows 10+

Note: If your GPU isn't listed, compatibility cannot be guaranteed.

Supported GPUs

Setup Instructions

To play Rift content on your Meta Quest 2, ensure your PC meets the recommended specifications and your Meta Quest system software is up to date on both your PC and headset.

1. Install the Oculus/Meta App: Download the software from meta.com/quest/setup/ under Quest 2 - Link Cable and Air Link, and follow the instructions.
2. Open the Desktop App: Launch the Oculus/Meta desktop application on your PC.
3. Turn on Headset: Power on your Meta Quest headset.
4. Connect the Cable: Use the Stealth USB-C Power & Link Cable. Plug the right-angle end into your Meta Quest 2 headset and the larger USB-A end into a USB 3.0 port on your PC.
5. Enable Oculus Link: You should see a prompt to Enable Oculus Link. Click 'Enable'.
6. Launch Link Cable: You can also launch your Link cable via Settings > Quick Actions > Oculus Link within the headset.

You can open games via the headset interface or through the Oculus PC App Library on your PC.

Cable Management: Attach the cable to your head strap using the provided Velcro strap and fasten securely.

Diagram Description: The setup involves connecting the right-angle USB-C end of the Stealth cable to the Meta Quest 2 headset and the USB-A end to a USB 3.0 port on the PC. The cable can then be managed by attaching it to the headset's head strap with a Velcro strap.

Troubleshooting

Connection Issues

If your wired link connection is unsuccessful, check the following:

• Ensure Oculus Link is enabled.
• Perform a USB Connection test.
• Verify your graphics card meets PC requirements.
• Confirm your PC drivers are up to date.
• Try logging out and back in, or fully power off and restart your headset.
• Ensure the headset is not low on power.
• Confirm the cable is plugged directly into a USB 3.0/3.1 port. Try another port and test with other devices to check port functionality.
• Ensure Air Link is turned off, as it can affect wired link performance.

Performance Issues (Jittery or Stuttering Screen)

If your connection is not optimal and the screen is jumpy or stuttering, try the following:

1. Open the PC app on your computer.
2. Select 'Devices' and then 'Meta Quest'.
3. Select 'Graphics Preferences' and then choose 'Reset to default'.
4. Select 'Save'.

Charging

You can charge your headset while playing games. However, the charging rate is considerably slower during gameplay and will only maintain the battery at a similar percentage to when the headset was turned on and the cable attached. Charging capability and speed depend on your motherboard and PC power supply quality. Most motherboard USB ports provide limited power compared to dedicated chargers. Longer cables may also affect charging speed.

For optimal charging, it is best to charge the headset when it is powered off.

Warranty

This product is guaranteed for one year from the date of purchase. If a defect arises due to faulty materials or workmanship, the retailer will replace it with the same or a similar model upon production of proof of purchase. This guarantee does not cover defects from accidental damage, misuse, or wear and tear, and is only available to the original purchaser. This does not affect your statutory rights.

Important Safeguards & Precautions

• Children should always be supervised when using this product.
• This unit is for indoor use only. Do not expose to dust, direct sunlight, wet weather, high humidity, high temperatures, or mechanical shock.
• Do not expose to splashing, dripping, rain, or moisture. Do not immerse in liquid.
• Do not position cables where they could be subjected to extreme heat or flames.
• Keep cables away from oil or sharp objects.
• Avoid any unnecessary strain on the cable.
• Do not use the USB cable with any other attachment, unit, or equipment other than your console and controllers.
• Do not disassemble; there are no serviceable parts inside.
• For external cleaning, use a soft, clean, damp cloth only. Detergents may damage the cabinet finish and leak inside.

Recycling

The symbol on electrical products, batteries, or packaging indicates that they should not be disposed of as general household waste in the EU or Turkey. Dispose of them in accordance with applicable local laws or requirements for electrical equipment/batteries to ensure proper waste treatment. This helps conserve natural resources and improve environmental protection standards.

Support

If you require any help or assistance, please contact help@abptech.co.uk or visit stealthgaming.net/support for Set-Up Guides, Support Articles, FAQs, and more.

Live Chat: Available at stealthgaming.net. Click the 'Chat With Us' box.

Operating Times: Monday - Thursday 9am to 5pm, Friday 9am to 4pm (UK Times - GMT).