Aldes LINED S 1F 900 RAL9003 Linear Slot Diffuser

Product Overview

The Aldes LINED® Slim is a frameless linear aluminum slot diffuser designed for air supply or return in tertiary buildings. It offers a sleek aesthetic with identical supply and return grilles and a slim frame for seamless integration into metal ceilings.

Product Details

Reference: 11003553

Model: LINED S 1F 900 RAL9003

Description: The LINED® Slim is a linear aluminum slot diffuser with adjustable slots for air supply or return in HVAC systems for tertiary buildings. It is designed without a frame for perfect integration into metal ceilings. Available in 1 to 8 slots and lengths from 300 to 2000 mm in 5 mm increments. The openable model is limited to 1500 mm. Slots are 25 mm wide. Installation is done via a plenum. The diffuser body is anodized aluminum in natural white RAL 9003 matte 30% or other RAL finishes, or the AldesArchitect® finish.

Key Features:

• Adjustable air diffusion via a central deflector in each slot.
• Possibility of vertical air supply.
• Body and deflector made of aluminum.
• Standard finish: RAL 9003 white.
• Slot width: 25 mm.
• Available models:
• LINED® Slim S: Supply model with adjustable deflectors.
• LINED® Slim E: Return model with fixed deflectors.
• LINED® Slim EO: Return model with fixed deflectors and an openable central core for filter access within the plenum. This model features a hinged core with push-push closure, available from 3 slots, with a maximum length of 1500 mm.
• Concealed plenum fixing:
• Adjustable and accessible from below the diffuser (S3 type).
• Directly via self-drilling screws on the plenum sides (S2 type).
• S2 fixing is recommended for suspended ceilings and is incompatible with non-removable ceilings (plasterboard or BA13).

Applications

• New construction
• Renovation
• Tertiary sector premises
• Educational institutions

Installation

The LINED® Slim diffuser is installed in the ceiling using a plenum and fixings chosen according to the plenum and ceiling type.

General Data:

Diagrams:

Diagram 1: Shows the LINED S Slim diffuser with plenum, illustrating dimensions L, L-2, L-12, H, and ØD. It indicates fixation types S2 or S3.

Diagram 2: Depicts the LINED E Slim diffuser with plenum and S2 fixation.

Diagram 3: Illustrates a supply diffuser with S2 fixation.

Diagram 4: Shows a close-up of S3 fixation with a screwdriver.

Diagram 5: Illustrates a supply diffuser with S3 fixation.

Diagram 6: Shows a close-up of S3 fixation.

Complementary Features

Accessories:

• Connection plenum in galvanized steel with side spigot, single or insulated version.
• G3 M1 filter.
• Pivoting damper fitted into the plenum spigot.

Accessory References:

Contact Information

For more information, contact your Aldes advisor.

Visit: www.aldes.com