Installation Guide for tp-link models including: BE6500, BE6500 Wi-Fi 7 Wireless USB Adapter, Wi-Fi 7 Wireless USB Adapter, 7 Wireless USB Adapter, USB Adapter
TP-Link Systems Inc. TBE6500U 1) BE6500 Tri-Band Wi-Fi 7 Wireless USB Adapter, 2) BE3600 Dual-Band Wi-Fi 7 Wireless USB Adapter 2BH7FTBE6500U 2BH7FTBE6500U tbe6500u
File Info : application/pdf, 2 Pages, 776.93KB
DocumentDocumentQuick Installation Guide Wi-Fi 7 Wireless USB Adapter Images are for demonstration only. ©2025 TP-Link 7106512049 REV1.0.0 Before You Start · Make sure your Router or Access Point supports the Wi-Fi 7 standard. · It is recommended to use the adapter on Windows 11 (64-bit) or above. 1 Connect to a Computer Note: It is recommended to connect the adapter to a USB 3.0 ( ) port. 2 Install Driver a. Go to My Computer or This PC. b. Double-click the TP-Link CD Drive, then run SetupInstall.exe to install driver. SetupInstall.exe Note: · If you cannot find the setup program, please download the driver at www.tp-link.com/support. You can also check for new releases and download the latest drivers on this website. · If an unknown publisher message pops up, select Yes to continue. · If Windows User Account Control requires admin credentials, type user name and password of your Windows administrator account. 3 Join a Wireless Network Troubleshooting a. Click the network icon on the taskbar (the icon might look like one of these: , , , or ). b. Select your Wi-Fi network, click Connect and enter the password when prompted. Network 6 Connected If you have problems during the installation, please refer to the following online FAQs. T1. Can't find the hardware version of the adapter: https://www.tp-link.com/faq-46.html T2. Can't find or connect to the wireless networks: https://www.tp-link.com/faq-2253.html T3. Can't install the driver: https://www.tp-link.com/faq-2252.html TP-Link_XXXX Connect automatically Connect Network settings Safety Information ? Need more help? visit https://www.tp-link.com/support, for technical support, replacement services, user guides, and other information; or simply scan the QR code. · Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. · Do not use the device where wireless devices are not allowed. · Keep the device away from water, fire, humidity or hot environments. · This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) defined in the standard of IEC 62368-1. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011 /65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 5 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
TP-Link Product Support - Wireless Networking Equipment SupportCE Regulatory Compliance | TP-LinkProblems you may come across during the driver installation of the TP-Link wireless adapterWhy cannot I connect to my wireless network | TP-LinkHow to find the hardware version on a TP-Link deviceTP-Link Product Support - Wireless Networking Equipment SupportRegulatory Compliance | TP-Link