In-grade luminaire · Wall washer
BEGA Product Model: B84300
Application
A round in-grade luminaire designed for the illumination of walls and building facades. It is engineered to bear pressure loads up to 11,000 lbs. from vehicles with pneumatic tires. This luminaire is not intended for use in traffic lanes where it may be subjected to horizontal pressure from braking, accelerating, or changing direction vehicles.
Materials
- Clear safety glass
- Marine grade, copper free (≤0.3% copper content) A360.0 aluminum alloy
- BEGA Tricoat®, a 3-layer finishing technology for increased corrosion protection
- Corrosion-resistant 304 grade stainless steel
- High temperature silicone gasket
- Fully potted waterstopper cable
- Mechanically captive stainless steel fasteners
- Pure anodized aluminum reflector surface
NRTL listed to North American Standards, suitable for wet locations. Protection class IP 68.
Weight
30.9 lbs.
Electrical Specifications
Parameter | Value |
---|---|
Operating voltage | 120-277VAC |
Minimum start temperature | -30°C |
LED module wattage | 46.8 W |
System wattage | 53.0 W |
Controllability | 0-10V dimmable |
Color rendering index | Ra > 80 |
Luminaire lumens | 5052 lm |
LED service life (L70) | 60000 hrs |
LED Color Temperature Options
- [checkbox] 4000K (K4)
- [checkbox] 3500K (K35)
- [checkbox] 3000K (K3)
- [checkbox] 2700K (K27)
BEGA can supply suitable LED replacement modules for up to 20 years after the purchase of LED luminaires. Refer to the BEGA website for details.
Finish
#4 brushed stainless steel. Custom colors are not available.
Available Options
[checkbox] FSC | Fusing |
[checkbox] NSL | Non-skid lens |
Included (available for pre-shipment)
[checkbox] BB84290 | Installation housing |
Diagram Description
A cross-section diagram illustrates the in-grade luminaire installed within the ground. It shows the luminaire housing, the lens, and the internal reflector. Dimensions are indicated by labels A, B, and C, corresponding to specific measurements of the fixture or its installation footprint.
Dimensions (Model B84300):
LED | Beam Angle | A | B | C |
---|---|---|---|---|
46.8W | 40°x53° | 13 | 14 | 10 |