HiRise Pro

How to assemble

1. Step 1

   Carefully align and slide top onto bottom as shown

   Diagram shows two hands aligning and sliding the top section of the stand onto the bottom section.

2. Step 2

   Slide shelf into HiRise at desired height

   Diagram shows a hand sliding an internal shelf into the main body of the stand at a specific height.

3. Step 3

   Place monitor on shelf inside HiRise

   Diagram shows a monitor being placed onto the internal shelf within the HiRise stand.

4. Step 4

   Slide back plate into place

   Diagram shows a back plate being slid into the rear of the HiRise stand.

5. Step 5

   Choose desired finish and connect magnetic front plate

   Diagram shows a magnetic front plate being attached to the front of the HiRise stand.

Tips and Tricks

When assembling HiRise, position the bottom section with its end on a stable desktop surface. Align the rails of the two sections, then slide the top down until even with the bottom section.

To adjust your monitor to your desired screen height - first remove your monitor, then change the position of the internal shelf. Place monitor back into HiRise and power up to check the new position of your screen.

Secure the back faceplate with the opening facing down for complete access to connections and power on your peripherals and hard-drives.

12 Ways to Re-purpose Your HiRise Box

Our flag is red and our hearts are green. So if you could, do the earth a favor and find a fun way to re-use your HiRise box.

1. Perfect for storing 8 x 10 photos
2. Use it to make a shadow box
3. Re-purpose as a fancy gift box
4. Store those magazine cut-outs you've been collecting
5. Fill with pens, pencils and crayons
6. Use as a drawer organizer
7. Save it for the next kids' craft project
8. Store all of your tax receipts in the box
9. Fill with Legos or trading cards
10. Turn it into a garage for Hot Wheels
11. Flatten it out and use it as backer board in a picture frame
12. Fill with sand and use as a zen garden