ICPDAS PCIe-S118 Serial Communication Card User Guide

User Guide for ICPDAS models including: PCIe-S118, PCIe-S148, PCIe-S118 Serial Communication Card, PCIe-S118, Serial Communication Card, Communication Card, Card

Tammy

Quick-Start-Gide-PCIe-S1x8

PCIe-S118 CR | ICPDAS-EUROPE

ICPDAS-EUROPE

PCIe-S148 CR | ICPDAS-EUROPE

File Info : application/pdf, 8 Pages, 1.43MB

Quick-Start-Gide-PCIe-S1x8

Quick Start
for PCIe-S118 PCIe-S148

1 What's in the Shipping Package?
The package includes the following items:
PCIe-S118 or PCIe-S148

June. 2021/ Version 1.1

2 Installing Windows Driver

Quick Start Gide (This Guide)

Launch the Windows XP/7/8/10/2012/
2016 (32/64-bit) driver setup program (PCIe_SPCard_Win_Setup_1.00.02.exe), which can be obtained from either the companion CD-ROM or the web site:

Software CD (V6.1 or later) CA-PC62M Connector

CD: \Napdos\multiport\windows\

https://www.icpdas.com/en/download/index.php?n ation=US&kw=PCIe+Series+Card+Windows+Driver

Click the "Next>" button to start the installation. Click the "Next>" button to install the driver into the default folder. In the installation process, the Command Prompt windows will be displayed, don't care.
And please do not close this Command Prompt window in installation process.
Select the "NO, I will restart the computer later" and click the "Finish" button.

E-mail: service@icpdas.com

Page: 1

3 Installing the Hardware
Shut down and power off your computer. Remove the cover from the computer. Select an unused PCI Express slot. Carefully insert your PCIe-S1x8 card into the PCI Express slot. Replace the PC cover. Power on the computer. Follow the prompt message to finish the Plug & Play steps. Please open the "Device Manager" to verify the COM port installation, as follows steps:
8-1: In Windows 7, Click "Start" button, and then click "Control Panel". 8-2: Click "System and Maintenance", and then click "Device Manager". 8-3: Verify that the COM ports of PCIe-S118/S148 card are listed correctly.

Successful Installation
COM port mapping is automatically applied depending on the PC.

Successful Installation
Check whether the PCIe-S1x8 card is listed correctly or not.

Page: 2

4 Manual COM Port Configuration

If the auto-configuration for COM Port is messy or that is not you need, you can change the COM port mappings. For detailed configuration steps, please refer to the following:

Open Windows Device Manager and right click on the serial port of the PCIe-S1x8 series card.

Select the "Properties" item from the popup menu. Click the "Port Settings" tab and click the "Advanced..." button. Select the appropriate COM Port number from the "COM Port Number:" drop-down options and

click the "OK" button. Note that the COM port display "(in use)" means this COM port is being used.

Therefore, please do not select it.

Click the "OK" button in the "Properties" dialog box.

Restart your computer to complete the configuration.

Right-click

Page: 3

5 Pin Assignments and RS-232 Cable Wiring for PCIe-S118

PCIe-S118 Card Signal RxD TxD GND DTR -DCD DSR RTS CTS

RS-232 Wiring

Device Signal TxD RxD GND DSR DCD
-DTR CTS RTS

Page: 4

6 Pin Assignments and RS-422/485 Cable Wiring for PCIe-S148

PCIe-S148 Card Signal

Device

RS-485 Wiring

Signal

DATA-

DATA+

Note: The RS-485 bus is a differential (balanced) signal, thus you cannot wire the Data+ with Data- directly for a single port loop-back test. It will not work at all.

PCIe-S148 Card

Signal

RS-422 Wiring

Device

Signal

TxD-

RXD-

TxD+

RxD+

TxD+

RxD-

TxD-

GND

Page: 5

7 Self-Test Wiring
Step 1: Connect the DN-09-2 terminal board (optional) to the PCIe-S1x8 series card using the CA-9-6210 and CA-0910F cables (optional).

Step 2: Wire the Port 0 and Port1. PCIe-S118 card (RS-232 Wiring): Shorting the RxD, TxD and GND pins of both Port0 and Port1.

Port0 PIN
Signal TxD0 3 RxD0 2 GND 5

Port1 PIN
Signal 2 RxD1 3 TxD1 5 GND

PCIe-S148 card (RS-485 Wiring): Shorting the Port0 Data+ and Port1 Data+ and the Port0 Dataand Port1 Data- pins.

Port0 PIN
Signal Data0- 1 Data0+ 2

Port1 PIN
Signal 1 Data12 Data1+

Page: 6

8 Execute the Test Program
Step 1: Execute the Test2COM.exe program, which can be downloaded from: CD:\Napdos\multiport\utility https://www.icpdas.com/en/download/index.php?nation=US&kw=Test2COM

Step 2: Set the appropriate COM Ports, Baud Rate and Data Format information to the values shown in the image below.

COM Ports: Enter COM3 (First), COM4 (Second).
Data Bits: Check "8" Parity: Check "None"

Stop Bits: Check "1" Baud Rates: Check values 9600 to 115200
Test Loops: Type "1" Click the "Start Test" button to begin the

Page: 7

9 Successful Testing
Once the test is complete, verify the test results. If the result indicates that the test was successful, the expanded COM Port is ready-to-use.

Success Test: 5 Failed Test: 0

Related Information
PCIe-S118/PCIe-S148 card product page: https://www.icpdas.com/en/product/guide+Industrial__Communication+Serial__Communicatio n+Multi-port__Serial__Board#793
DN-09-2, CA-0910F and CA-9-6210 product page (optional): https://www.icpdas.com/en/product/DN-09-2 https://www.icpdas.com/en/product/CA-0910F https://www.icpdas.com/en/product/CA-9-6210
Software and documentation: CD: \Napdos\multiport\ https://www.icpdas.com/en/download/index.php?model=PCIe-S118

Page: 8

References

Microsoft Office Word 2007 Microsoft Office Word 2007