Neewer Wireless Microphone System

Product Overview

Thank you for choosing a NEEWER product! Unleash the power of seamless recording with our intelligent wireless microphone. Experience professional audio without the hassle of app installations – it's a simple Plug and Play solution. Tailored for a variety of applications, from dynamic webcasting and engaging video vlogging to articulate program discussions, precise interview recordings, and effective video teaching.

Package Contents

• Windscreen x2
• Charging Cable x1
• Storage Pouch x1
• Lavalier Microphone (TX) x2
• Receiver (RX) x4
• Charging Case x1

Product Illustration

TX Unit

Power Button: Press and hold for 2 seconds to turn on/off. Short press to mute/unmute.

Function Button: Press to cycle through 5 levels of volume adjustment. Press and hold to turn noise reduction on/off.

Display: Shows status indicators.

Charging Port: For charging the unit.

RX Unit

Display: Shows status indicators.

Reset Hole: Use a pin to reset pairing (use with caution).

TX Operation

Notes:

1. In case of display conflicts, priority is: Volume Adjustment > Low Battery > Mute > Charging > Noise Reduction > Functioning.
2. Noise reduction cannot be turned on/off in pairing or mute mode.
3. If noise reduction is turned on during charging or low battery, the noise reduction indicator will stay on for 3 seconds before returning to the charging or "Charging" status.
4. Mute status cannot be saved and will be deactivated after a restart.
5. Noise reduction status is retained after a restart.
6. If the transmitter is off, press and hold the Power Button and Function Button for 6 seconds to enter pairing mode.

Operating Instructions

Step 1: Connect the Receiver to your Phone.

Note: For OPPO/VIVO/IQOO/Realme smartphones, search for "OTG" in settings and enable "OTG Power Supply" before connecting the RX receiver.

Diagram showing the RX receiver being plugged into a smartphone.

Step 2: Turn on the Receiver.

To turn on the receiver, press and hold the power button or take it directly out of the charging case. When the indicator blinks, it means the receiver is powered on.

Diagram showing the TX unit with the power button highlighted.

Step 3: Start Recording.

When the transmitter indicator lights up, open any video recording or live streaming app on your phone to start recording.

Diagram showing the phone connected to the TX unit, with an indicator light on the TX unit.

Note: If your phone's battery is low, you can charge it via the receiver's connection.

Diagram showing the phone connected to the RX receiver, which is then connected to a power bank.

RX Operation

Notes:

1. When noise reduction is turned on/off on one TX, it is simultaneously turned on/off on the other TX.
2. RX only shows its own pairing status, not that of TX. After the RX pairing is reset, Blue Indicator 2 will blink quickly for 2 minutes. If RX is not paired within this time, Blue Indicator 2 will start blinking slowly, indicating RX is waiting for pairing.

Battery Warning

1. Do not attempt to disassemble, modify, or repair the battery yourself. Unauthorized tampering may lead to leakage, overheating, fire, and other hazards.
2. Always use the supplied or certified chargers to avoid overcharging and short circuits.
3. If unusual charging speeds occur or the indicator blinks, please stop charging and contact customer service immediately.
4. Keep away from flammable and explosive materials.

Safety Precautions

1. Please keep this electronic precision device away from water. If it gets wet, turn off the device, shake off the water, and contact a professional technician.
2. Recharge the battery every three months to keep it in optimal condition and protect the battery cells.
3. Do not expose the battery to sunlight, fire, or heat.
4. Keep the transmitter and receiver facing each other to maintain a strong signal.

Specifications