Instructions for LAKEMID models including: DETBR, DETBK, DETGY, DET005BR2, DET005BR2 End Tables with Charging Station, End Tables with Charging Station, Tables with Charging Station, Charging Station, Station

DET005说明书线上

User Manual (PDF)

Amazon.com: LAKEMID Tall Nightstand with Charging Station, Nightstands Set of 2 with 20 Colors LED Light Strip 3 Drawers, Side Tables Bedroom End Table with USB Ports and Outlets for Living Room, Office (Black) : Home & Kitchen

Night Stand Set 2 with Charging Station, End Table Set of 2 with 20 Colors LED Light Strip, 3 Fabric Drawers, Bedside Table with USB Ports and Outlets for Bedroom (Black) Black 3 Drawers with USB & LED

DET005 User Manual (PDF) LAKEMID LAKEMID Night,Stand,Set,2,with,Charging,Station,End,Table,Set,of,2,with,20,Colors,LED,Light,Strip,3,Fabric,Drawers,Bedside,Table,with,USB,Ports,and,Outlets,for,Bedroom,(Black),Black,3,Drawers,with,USB,&,LED,B0DYNPJXCJ,B0CF4QH4SR,B0CF4KKQMQ,B0CF4DQSNM,B0CF46MVVT

PDF preview unavailable. Download the PDF instead.

B1MIH5j-ZDL
LAKEMID
DETBR DETBK DETGY

End Tables
with charging station

US
General Guidelines
* Please read the following instruction carefully and use the product accordingly. * Please keep this manual and hand it over when you transfer the product. * This summary may not include every detail of all variations and considered steps.
Please contact us when further information and help are needed.
Notes
* lt is recommended that 2 adults assemble the product using the included tool, Strictly follow the assembly steps.
* lf there is any odor after unpacking, put the product in a ventilated place for several days to air out.
* Ensure all pats are intact before assembly. lf there are any damaged or missing parts, stop assemble and contact us immediately. lt is recommended to assemble the product on a soft surface.
* Loosely tighten screws first, then fully tighten them after you finish the assembly. * Inspect the tightness of screws regulariy and tighten again if necessary. * Protect the product from strong sunlight, damp environments, and mildew. * For daily care, please clean it with a damp cloth first, then wipe dry.
Warnings
* During assembly, keep all small parts out of the reach of children. lt may be fatal if swallowed or inhaled.
* To avoid the potential dangers of suffocation, please keep all parts and packaging (film,plastic bags, foam.etc.) away from babies and children.
* Do not stand or sit on the product. * Never touch the product with sharp or corrosive objects. * Please do not place overweight items on the top of this product. * Children are not allowed to climb on or play with the product for safety reasons.
as this may cause the product to tip over and result in immeasurable injury. * Make sure all parts and screws are tightened for a stable structure before use to
reduce safety hazards.
1

Accessories List
A
X2
B
X2

C

X2 D

X2

2

Accessories List

E

X2 F

X6

G
X6
H
X6

3

Accessories List

1

8+1 2

12+1

mm

3

8+1 4

mm

5

X2 6

mm
4+1
mm
X2

LED strip

7

X2 8

12+1

mm
4

Accessories List

9

X6 10

X8

11

X1 12

X1

13

X2

5

EXPLODED
A

F

E

B C
H G

H

D

G

H G
F F
6

step 1

C D
A

Make sure the two ends in the same side.
7

step 2
1

C D
A

!

Do not fully tighten the screws yet.

1

X 4

! Do not mix up 1 and 2

1

shorter

2

longer

8

step 3

 

6

X 1

9

step 4

C D

E
! Insert E into the holes in C and D

10

step 5

2
F

!

Do not fully tighten the screws yet.

2

X 2

! Do not mix up 2 and 1

2

longer

1

shorter

11

step 6

 
B

!

Do not fully tighten the screws yet.

3

X 4

12

step 7

F

F



!

Fully tighten all the screws above.

2

X 4

! Do not mix up 2 and 1

2

longer

1

shorter

13

step 8
10

10

X 4

Turn Over
14

step 9

 

!

Fully tighten the screws.

4

X 2

5

X 1

15

step 10
Conect the USB of the LED strip and the USB socket of the outlet
16

step 11 H

step 12

G
9

8 11

!

Fully tighten the screws.

9

X 3

8

X 6

17

step 13 18

step 14 19

step 15
Please repeat the above steps to assemble the second one
CONGRATULATION!!
20

Set the LED light controlled by a specific remote
step1. Unplug the LED light and wait for a few seconds. step2. Plug in the LED light, within 5 seconds, press and hold the "POWER" and "BRIGHT-"
buttons at the same time until the LED flash white light. POWER
The LED light strip is currently restricted to be controlled only by this remote. However, if you press and hold the red button until the LED flash white light, it will restore the ability to be controlled by any remote.
21


Adobe PDF library 15.00 Adobe Illustrator 24.3 (Windows)