TECCPO Laser Distance Meter

Introduction

This document provides comprehensive information about the TECCPO Laser Distance Meter, including its features, operation, safety guidelines, technical specifications, maintenance, and troubleshooting. Learn how to measure length, area, volume, and use Pythagoras functions.

The TECCPO Laser Distance Meter is a handheld device designed for accurate measurement of distances, areas, and volumes using laser technology. The device features a digital display showing measurement results, battery status, and various measurement modes. It is operated via a simple button interface.

Safety Regulations

Please read the safety regulations and operation guide carefully before operating the device.

• [Warning] Please read all operational and safety regulations in this manual before operation. Improper operations may cause damage to the device, affect measurement results, or cause bodily injury.

• [Warning] The instrument is not allowed to be disassembled or repaired. Any illegal modification or performance change to the laser emitter is forbidden. Keep out of reach of children and avoid use by unauthorized personnel.

• [Warning] It is strictly prohibited to shoot eyes or other body parts with the laser. Do not aim the laser at any surface with strong reflection.

• [Warning] Due to electromagnetic radiation interference, do not use the meter near medical equipment, or in flammable or explosive environments.

• [Warning] Discarded batteries or the meter device should not be treated as household garbage. Handle them according to related laws and regulations.

• [Info] For any quality issues or questions, please contact local distributors or the manufacturer for solutions.

Languages supported: English (EN), German (DE), French (FR), Spanish (ES), Italian (IT).

Display and Keyboard

The device features a clear digital display and an intuitive keyboard for operation.

Display Elements:

• Power Supply indicator
• Record indicator
• Indicators for Length, Area, Volume, and Pythagorean measurements
• Laser On indicator
• Maximum value display
• Auxiliary Display
• Minimum value display
• Major Display

Keyboard Functions:

• [READ]: Turn on, Measure (single/continuous)
• [+]: Addition / Increase value
• [OFF CLEAR]: Subtraction / Sound On/Off / Clear / Turn Off (long press)
• [U]: Save / Mode Selection (Area, Volume, Pythagoras) / Reference Point / Unit Switch / Exit Record Mode

The device's front panel includes a large display screen showing measurement data. Below the screen are several buttons: a large 'READ' button for measurement initiation and power, '+' and 'OFF CLEAR' buttons for adjustments and functions, and a 'U' button for various modes and settings. The laser emitter is located at the top, and the battery compartment is on the back.

Batteries Installation and Operation

Batteries Installation:

The device is powered by 1.5V AAA alkaline batteries.

• To install or replace batteries, discharge the battery door on the back of the device.
• Place batteries according to the correct polarity, then close the battery door.
• If the device is not used for a long time, remove the batteries to prevent corrosion.

The battery compartment is located on the back of the device. It opens by releasing a latch. The device requires two 1.5V AAA batteries, which should be inserted with correct polarity as indicated inside the compartment.

Turning On/Off the Instrument:

• To turn on, press the [READ] button. The device and laser will activate simultaneously.
• To turn off, long press the [OFF CLEAR] button for 3 seconds. The device also shuts off automatically after 150 seconds of inactivity.

Unit Setting:

Long press the [U] button to reset the current measurement unit. The default unit is 0.000m. There are 6 units for selection:

Measurement Functions

Changing Reference Point:

Press the [U] button to change the reference point. The default reference point is the rear of the device.

Back Light On/Off:

The backlight turns on automatically during operation and turns off after 15 seconds of inactivity.

Self-Calibration:

This function helps maintain the precision of the device.

1. Power off the device.
2. Long press the [OFF CLEAR] button and then press the [READ] button.
3. Release the [READ] button, then release the [OFF CLEAR] button until "CAL" and a figure appear on the screen.
4. Use the [+] or [-] buttons to adjust the figure to match the meter's accuracy. The adjustment range is -9mm to 9mm.
5. Long press the [READ] button to save the calibration result.

Length Measurement & Calculation:

Single Distance Measuring:

Turn on the laser beam by short pressing the [READ] button. Press [READ] again for a single distance measurement. The result is displayed in the major display area.

Continuous Measuring:

Long press the [READ] button under measuring mode to enter continuous measuring mode. The maximum measured result is shown in the auxiliary display area, and the current result is shown in the major display area. Short press [OFF CLEAR] or [READ] to exit continuous measuring mode.

Area Measurement:

Press the [U] button. One side of a rectangle will blink on the display. Follow these steps:

1. Press [READ] for the length.
2. Press [READ] again for the width.

The device calculates and displays the area in the major display area. The previous length measurement is shown in the auxiliary display area. Press [OFF CLEAR] to clear the result and measure again if needed. Press [OFF CLEAR] again to exit the mode.

Volume Measurement:

Press the [U] button twice to enter volume measurement mode. A symbol [volume] will appear on the top of the screen. Follow these steps:

1. Press [READ] for the length.
2. Press [READ] again for the width.
3. Press [READ] a third time for the height.

The device calculates and displays the volume in the major display area. Press [OFF CLEAR] to clear the result and measure again if needed. Press [OFF CLEAR] again to exit the mode.

Pythagoras:

There are four Pythagoras modes to assist when direct measurement is difficult.

1. Calculate the second leg: Measure the hypotenuse and one leg.
   • Short press [U] three times to enter Pythagoras mode. The hypotenuse symbol [hypotenuse] will blink.
   • Press [READ] to measure the hypotenuse (a).
   • Press [READ] again to measure one leg (b). The device calculates the length of the other leg (x).
2. Calculate the hypotenuse: Measure the lengths of two legs.
   • Short press [U] four times. One leg symbol [leg] will blink.
   • Press [READ] to measure one leg (a).
   • Press [READ] again to measure the other leg (b). The device calculates the length of the hypotenuse (x).
3. Calculate a side using median line: Measure one side and the median line.
   • Short press [U] five times. One side symbol [side] will blink.
   • Press [READ] to measure one side (a).
   • Press [READ] again to measure the median line (b).
   • Press [READ] a third time to measure another side (c). The device calculates the length of the leg in full line (x).
4. Calculate a leg in full line: Measure hypotenuse and two legs.
   • Short press [U] six times. The hypotenuse symbol [hypotenuse] will blink.
   • Press [READ] to measure the hypotenuse (a).
   • Press [READ] again to measure another hypotenuse (b).
   • Press [READ] a third time to measure one leg (c). The device calculates the length of the leg in full line (x).

Note: Legs must be shorter than the hypotenuse; otherwise, an "Err" message will appear. Ensure all measurements start from the same point for accuracy.

Addition / Subtraction

The device supports length, area, and volume addition and subtraction.

• To perform addition (cumulation), press [+]. The symbol "+" will appear, showing the last measurement and the cumulative result.
• To perform subtraction (regressive), press [-]. The symbol "-" will appear, showing the last measurement and the cumulative result.

Example for Area Cumulative Function:

1. Measure the first area (shown as P1C1).
2. Press [+] and measure the second area (shown as P1C2). A "+" symbol appears in the bottom left.
3. Press [READ] to get the summation result of these two areas (shown as P1C3).

The diagrams illustrate the process: P1C1 shows an initial area measurement. P1C2 shows a second area measurement being added, indicated by a '+' symbol. P1C3 displays the combined total area.

Record Function, Angle Measurement, and Tips

Record Function:

Long press the [U] button for 3 seconds to record the current measurement result. Records can be saved for Area, Volume, and Pythagoras modes as well.

Read / Delete Records:

• Short press the [READ] button to read saved records. Use [+] and [-] to navigate.
• Short press [OFF CLEAR] to delete the most recent record.
• Long press [OFF CLEAR] or [U] to exit the record mode.

Angle Measurement:

The angle information is displayed at the top of the screen. The angle measurement range is -90.0° to 90.0°.

Tips and Error Messages:

The device may display warning information. Here are common messages:

Technical Specifications

Note: Use a target plate to increase the measurement range during daylight or if the target has poor reflection properties.

Instrument Maintenance

• Typical Tolerance: ±2mm for reflectivity 100% (white surface) and environment light <2000 LUX at 25°C. Tolerance can be affected by distance, reflectivity, and environment light, potentially reaching ±(2mm+0.2mm/m).
• Do not store the meter in high temperature and strong humidity environments for extended periods. If not used frequently, remove the batteries and store the meter in a cool, dry place in its protective bag.
• Keep the device surface clean. Use a soft, damp cloth for cleaning. Avoid using corrosive liquids. The laser output window and focus lens can be maintained according to optical device maintenance procedures.

Delivery Package

Please check if the accessories are complete according to the list below:

Troubleshooting and Warranty

Warranty Information:

• 30 Days Money Back Guaranty: Within the first 30 days of purchase, you are allowed to return the product for a full refund.
• 30 Days to 3 Months (6 Months total): We will replace the defective unit due to manufacturing fault with a new one. An extra 3 months warranty is provided if you register on the website.
• 3 Months to 24 Months: Within 24 months, we provide timely and effective online after-sales service.

Please note that accessories are not included in the warranty replacement.

How to Return Your TECCPO Products:

1. Contact support@teccpotools.com with your order number.
2. You will receive an RMA# (Return Merchandise Authorization) and return address.
3. Fill out the RMA information, tear off this page, and include it inside your return package.
4. Replacement or refund will be issued after receiving your return.

Return Products Details:

To ensure your returns are processed quickly, please provide the following details:

Purchase Name: [Purchase Name]

Order Number: [Order Number]

Date of Purchase: [Date of Purchase]

Your Email Address: [Your Email Address]

Where did you buy it: [Where did you buy it]

If your product was purchased through Amazon Fulfilled channel, please contact Amazon for returns within 30 days of purchase.

Manufacturer Information

Shenzhen Allsight E-business Co., Ltd

Website: www.teccpotools.com

E-mail: support@teccpotools.com

Address: Room 104, Building P09, South ChinaCity Electronic Trading Center, Longgang District, Shenzhen, CHINA

Made in China

Certifications: ROHS, CE, FC, FDA