Contact Us â Official VEVOR Support
Instruction Manual for VEVOR models including: BL-DC2630-20V-MT, BL-DC2808-20V-MT, BL-DC2630.20V-MT Rotary Hammer Drill, BL-DC2630.20V-MT, Rotary Hammer Drill, Hammer Drill, Drill
File Info : application/pdf, 20 Pages, 14.38MB
DocumentDocumentRotary Hammer Drill
MODEL:BL-DC2630/20V-MT
Technical Support and E-Warranty Certificate www.vevor.com/support
Rotary Hammer Drill
Model: BL-DC2808/20V-MT
Photo for reference This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. 2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
3
20 0-5300
2,8 0-1200
26 13 30 2,5
4
7 7 7
8 8 8 9 10 10 11
5
11
6
BATTERY CHARGER AND BATTERY PACK
UL version
Model:
CDQ20V/MT-2.4A-110V
Plug
UL
Input
AC100-120V 50/60Hz
Output Voltage
20V
Charging Current 2.4A
EU version CDQ20V/MT-2.4A EU AC200-240V50Hz 65W 20V 2.4A
1.The charger is designed to charge the battery packs for brand VEVOR. don't attempt to use any other devices. Never insert or allow metallic objects into your charger or battery pack connections because an electrical failure and hazard will occur. 2.Your battery pack is UNCHARGED and you must charge once before use. 1)Plug the charger into an appropriate outlet. 2)Slide one battery pack into the charger. Normally; the relevant charger indicator light will flash in green color showing the battery is being charged.
3)When it is fully charged, the light will change flash mode to on. WARNING:
When battery charge runs out after continuous use or exposure to direct sunlight or heat, allow time for the battery to cool down before re-charging to achieve the full charge. 3.This charger has a battery temperature protection feature. When the charger detects a battery pack that is too hot or cold, it automatically activates the protection circuit, and suspends charging until the battery pack has reached the correct temperature. The charging process will then automatically begin(the light will be green and flash). This feature ensures maximum battery life. 4.For a new battery or battery that has been in storage for some time, lease recharge the battery before use. If you want to store the battery for a long time, please fully charge the battery pack to ensure maximum battery life. 5.Longer life and better performance can be obtained if the battery pack is charged when the air temperature is between 18-24. Do not charge the battery pack in air temperatures below 0 or above 50. This is important
as it can prevent serious damage to the battery pack. 6.Never freeze your charger or immerse charger in water any other liquid. 7.When the battery pack fails to produce sufficient power on jobs that were previously done easily please recharge your battery, do not continue to use under this condition. You may charge a partially used pack whenever you desire with no adverse effect on the battery pack. 8.When charging it is normal that the charger and battery pack may become warm to touch. 9.If the battery pack does not charge properly:
1)Check current at power outlet by plugging in another appliance. 2)Plug and unplug to check whether the charger is OK. 3)Check whether the battery has been damaged. 4)Move the charger and battery pack to a location where the surrounding air temperature is approximately 18°C-24°C. 5)If the charging problem persists, take the tool, battery pack and charger to an authorized service center. 6)Under certain conditions, when the charger is plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the charger or before attempting to clean. 7.Battery packs which consists of three green led lights that indicate the level of charge remaining in the battery pack. The indicator light is an indication of approximate levels of charge remaining in the battery pack according to the following indicators:
81-100% charged
31-80% charged
<30% charged, pack needs to be charged
To actuate the indicator light button, press the indicator light button. A combination of the three green LED lights will illuminate designating the level of charge left. When the level of charge in the battery is below the usable limit, the indicator light will not illuminate and the battery will need to be recharged. NOTE: The indicator light is only an indication of the charge left on the battery pack. does not indicate tool functionality an is subject to variation based on temperature and end-user application.
FCC Information: CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This product may cause harmful interference. 2)This product must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.
Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures. · Reorient or relocate the receiving antenna. · Increase the distance between the product and receiver. · Connect the product to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for assistance.
CORRECT DISPOSAL
This product is subject to the provision of European Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. EC REP: E-CrossStu GmbH. Mainzer Landstr.69, 60329 Frankfurt am Main. UK REP: YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Technical Support and E-Warranty Certificate www.vevor.com/support