User Guide for Danfoss models including: iC2-Micro Performance Compact and Flexible Drive, iC2-Micro, Performance Compact and Flexible Drive, Compact and Flexible Drive, Flexible Drive, Drive
File Info : application/pdf, 16 Pages, 24.03MB
DocumentDocumentSelection Guide | iC2-Micro iC2-Micro Performance that pays off Run reliably at full load for ambient temperatures up to 50 °C drives.danfoss.com Not only reliable, but also compact, flexible, and user-friendly Save space and optimize your choice of motor 3 1 2 4 7 5 10 11 9 8 6 12 13 14 15 1 Pedestal 2 Heatsink 3 Power board 4 DC caps 5 Common choke 6 Removable fan 7 RFI board including RFI filter 8 Terminals for mains, motor and BR/UDC 9 Relay output 10 Shell 11 Control panel 12 RJ45 port 13 I/O's terminal & Modbus terminal 14 Decoupling for I/O and RS485 15 Terminal cover 2 Danfoss Drives · AD419729556676en-000302 iC2-Micro: the compact and flexible drive This quality general-purpose drive is a perfect match for a wide range of applications. iC2-Micro performs with unsurpassed reliability even in complex applications. It gives you user-friendliness, condensed functionality, and easy commissioning, all in a powerful compact package. Next-generation More compact, intelligent, and powerful than its predecessor, the iC2-Micro now succeeds VLT® Micro Drive FC 51. This reliable and durable drive is also even easier to use and install. You can reduce system complexity and cost whilst maintaining full performance. High performance This drive gives you excellent motor control and mechanical brake performance. New features include torque open loop control, locked motor detection, permanent magnet motor control, built-in control panel and, of course, connectivity with our MyDrive® Suite digital tools. Your choice of motor iC2-Micro is compatible with the motor of your choice, either induction or PM motor, so you can put together the best system for your application. Highly integrated design iC2-Micro contains an integrated control panel, potentiometer, RFI filter, brake chopper, and intelligent cooling to reduce the need for external components. Easy retrofit Designed to smoothly replace VLT® Micro Drive FC 51 in established plants. Fits your application You can use the same drive in diverse processes, since the iC2-Micro is designed to optimize a wide range of applications such as · Pumps · Fans · Material handling · Conveyors · Mixers · Packaging machines · Palletizers · Textile machinery Danfoss Drives · AD419729556676en-000302 3 iC2-Micro: the convenient drive With focus on streamlined operation, iC2-Micro keeps your task simple. The iC2-Micro offers a software tool to save time, improve reliability, and reduce risk Commissioning and service are easier than ever with MyDrive® Insight commissioning and monitoring tool For fast and easy configuration and commissioning, MyDrive® Insight enables you to control the drive from a PC for operations such as starting or stopping the drive, set references, set direction, reset, and coast of the drive. Once the drive is in operation, MyDrive® Insight monitors the drive and collects data for troubleshooting, maintenance, and service. Technicians can use MyDrive® Insight not only to configure parameter settings, but also to back up and restore these settings during service. Access to application guide and other documentations is faster than ever using the QR code located on the front of the drive for convenient scanning. By scanning the QR code with a smart device, you can access the iC2-Micro webpage to quickly find technical literature, technical data, drawings etc. Two variants with and without EMC filter, according to your needs. There's no need to pay for an EMC filter when it's not required! But with the integrated EMC filter you can use shielded motor cables and remain compliant with EN/ IEC 61800-3, class C1 or C2 fitting for your applications. This can help you save space in the cabinet and reduce handling process. Intuitive control panel simplifies commissioning, operation, and service. The control panel features a 6-digit 7-segment LED display, status indicators, clear navigation buttons, and built-in frequency setting potentiometer. Streamlined mounting and service thanks to simple wiring with spring type I/O terminals and removable fan. For single-phase 200 V drives in the power range up to 0.75 kW, they even support natural cooling without a cooling fan. The detachable cooling fan design with on-off control makes maintenance easily, improves the cooling efficiency, reduces service cost, and minimizes environmental noise. Operates at 50 °C ambient temperature at full load, iC2-Micro is designed to perform optimally under full load at 50°C ambient temperature, and up to 55°C with derating. This gives you cost savings since there is no need to install extra cooling equipment, nor to oversize the drive. Save-space thanks to the compact design optimized for book style sideby-side mounting. 4 Danfoss Drives · AD419729556676en-000302 PM motor compatibility You win the freedom to choose the best high-efficiency motor for your application. iC2-Micro provides highly efficient permanent magnet motor control in open loop under VVC+ in the whole power range. Integrated PID controller The built-in PID controller ensures solid process control, such as constant pressure or constant flow operation. Coated PCB Printed circuit boards coating is as standard against corrosive gases (IEC 60721-3-3). This protection provides high reliability in harsh environments, preventing failures and unnecessary downtime increasing lifetime of the drive. Integrated brake chopper A built-in brake chopper saves money and panel space. Feature Benefit Spring type I/O terminals Save installation time, avoid errors Integrated control panel with LED display & indicators Remote control panel with extra functions (option) Easy programming RJ45 port (RS485-based) Easy connection for external control panel option and PC tool Off-line configuration with adapter option Application set-up wizards Easy commissioning Potentiometer for setting setpoints locally Cost-effective with no external wiring Compact design Save cabinet space Coated Printed Circuit Boards Improved reliability in harsh environments Compatible with IPM and SPM motors Freedom to choose your preferred motor Integrated brake chopper and PID controller Reduced cost Flexible side-by-side mounting Save cabinet space and cost Operates at up to 50 °C without derating Reduced cost for external cooling Improved uptime 2 variants, with and without EMC filter Choose the best fit for the application No forced air over PCB for whole power range Improved reliablity Removable fan Easy maintenance Fan on / off control Reduce noise and energy saving Natural cooling in drives within MA01c enclosure Reduce noise and eliminate channel blockage risk Smart Logic Controller (SLC) Customize drive functionality, and optimize how the drive, motor and application work together Sleep mode Reduce energy costs and equipment wear and tear, extending the lifetime of the application UL LZGH2/8 certified in accordance with A2L refrigerants in HVAC/R systems UL/IEC 60335-2-40 and CSA C22.2 No. 0335-2-40 Danfoss Drives · AD419729556676en-000302 5 Wiring schematic Power input Analog output 0/4-20 mA + 10 V DC 0-10 V DC 0/4-20 mA 0-10 V DC 0/4-20 mA L1/L 1) L2 L3/N PE U V W PE Motor A=Analog, D=Digital 12 (+24 V OUT) Switch mode power supply 24 V DC 10 V DC 2) UDC- UDC+/BR+ BR- 3) 13 (D IN) 14 (D IN) 15 (D IN/OUT) P9.4.1.14) 24 V (NPN) 0 V (PNP) 24 V (NPN) 0 V (PNP) 24 V (NPN) 0 V (PNP) 24 V 0 V 17 (D IN) 18 (D IN) 20 (COM I/O) 24 V (NPN) 0 V (PNP) 24 V (NPN) 0 V (PNP) ON 1 2 Relay 1 03 02 01 S640 5) ON = Terminated OFF = Open 5 V S640 0 V 31 (A OUT) 32 (+10 V OUT) RS485 interface (N RS485) 69 (P RS485) 68 (COM RS485) 61 Brake resistor 250 V AC, 2 A RS485 33 (A IN) 34 (A IN) 35 (COM I/O) RS485 communication RJ45 port 1] Single DC choke in 3 x 380-480 V 18.5 kW (25 hp) and 22 kW (30 hp), and 3 x 200-240 V 11 kW (15 hp). 2] Built-in brake chopper is only applicable to drives in the power range of 3 x 380-480 V 2.2 kW (3.0 hp) and above, and 3 x 200-240 V 1.5 kW (2 hp) and above. 3] No BR terminals for 1 x 100-120 V drives, 1 x 200-240 V drives , 3 x 380-480 V 0.37-1.5 kW (0.5-2.0 hp) and 3 x 200-240 V 0.37-0.75 kW (0.5-1.0 hp) drives. 4] Select the PNP or NPN mode via parameter P9.4.1.1 Digital I/O mode (PNP=Source, NPN=Sink). 5] Use switch S640 (bus terminal) to enable termination on the RS485 port (terminals 68 and 69). 6 Danfoss Drives · AD419729556676en-000302 Specification Mains supply (L1, L2, L3) Supply voltage Supply frequency Displacement power factor (cos ) Switching frequency on input supply L1, L2, L3 Output data (U, V, W) Output voltage Switching on output Ramp times Frequency range Overload capacity Overload torque Overload torque at start Programmable digital inputs and outputs Digital inputs / digital outputs* Logic Voltage level *Note: One digital input can be configured as digital output. Pulse input and output Pulse input / Pulse output** **Note: One digital input can be configured as pulse input. Another digital input can be configured as pulse output. Programmable analog inputs and output Analog inputs Analog output Programmable relay output Programmable relay output 100-120 V (-15%/+10%) 200-240 V (-15%/+10%) 380-480 V (-15%/+10%) 50/60 Hz Near unity (> 0.98) Switching maximum 2 times/minute 0 -100% of supply voltage Unlimited 0.01-3600 s Induction motor · 0-200 Hz (VVC+ mode) · 0-500 Hz (U/f mode) PM motor · 0-400 Hz(VVC+ mode) 150% for 60 s every 10 min 200% for 1 s 5 / 1 PNP or NPN 0/24 V DC 1 / 1, voltage level 0/24 V DC 2, voltage or current Voltage level: 0 V to +10 V (scaleable) Current level: 0/4 to 20 mA (scaleable) 1 (current range 0/4 to 20 mA) 1 (NO/NC 240 VAC, 2 A / 30 VDC, 2 A) Danfoss Drives · AD419729556676en-000302 7 Electric data iC2-Micro mains supply 1 x 100-120 V AC Enclosure IP20/Open Type Typical shaft output Output current Continuous (3 x 200-240 V AC) Intermittent (3 x 200-240 V AC) Maximum cable size Mains, motor Maximum input current Continuous (1 x 100-120 V) Intermittent (1 x 100-120 V) EMC and brake chopper EMC filter type Built-in brake chopper Environment Power loss 1] Efficiency 1] [kW ] [hp] [A] [A] [mm2/AWG] [A] [A] [W] [%] MA01c 02A4 0.37 0.5 MA02c 04A8 1.1 1.5 2.4 4.8 3.6 7.2 4/10 11.6 25.6 17.4 38.4 C4 No 18 24 97.4 98.2 iC2-Micro mains supply 1 x 200-240 V AC Enclosure IP20/Open Type Typical shaft output Output current Continuous (3 x 200-240 V AC) Intermittent (3 x 200-240 V AC) Maximum cable size Mains, motor Maximum input current Continuous (1 x 200-240 V) Intermittent (1 x 200-240 V) EMC and brake chopper EMC filter type Built-in brake chopper Environment Power loss 1] Efficiency 1] [kW ] [hp] [A] [A] [mm2/AWG] [A] [A] [W] [%] MA01c 02A2 04A2 0.37 0.75 0.5 1.0 MA02c 06A8 1.5 2.0 2.2 4.2 6.8 3.3 6.3 10.2 4/10 6.1 11.6 18.7 8.3 15.6 26.4 C1/C4 No 16 31 46 97.5 97.6 97.6 MA02a 09A6 2.2 3.0 9.6 14.4 26.4 37 61 97.9 iC2-Micro mains supply 3 x 200-240 V AC 2] Enclosure IP20/Open Type Typical shaft output Output current Continuous (3 x 200-240 V AC) Intermittent (3 x 200-240 V AC) Maximum cable size Mains, motor Maximum input current Continuous (3 x 200-240 V) Intermittent (3 x 200-240 V) EMC and brake chopper EMC filter type Built-in brake chopper Environment Power loss 1] Efficiency 1] [kW ] [hp] [A] [A] [mm2/AWG] [A] [A] [W] [%] MA01a 02A4 04A2 0.37 0.75 0.5 1.0 2.4 4.2 3.6 6.3 3.8 6.7 5.7 8.3 No 21 36 97.3 97.4 MA02a 07A8 1.5 2.0 7.8 11.7 4/10 12.5 18.8 C4 53 97.9 MA03a 11A0 15A2 2.2 3.7 3.0 5.0 11 15.2 16.5 22.8 17.7 24.3 26.6 35.3 Yes 80 92 97.7 97.5 1] The value is measured at 100% rated torque-producing current and 90% rated motor stator frequency according to IEC 61800-9-2 and EN 50598-2. 2] 5.5-11 kW will be available soon 8 Danfoss Drives · AD419729556676en-000302 iC2-Micro mains supply 3 x 380-480 V AC Enclosure IP20/Open Type Typical shaft output Output current Continuous (3 x 380-440 V) Intermittent (3 x 380-440 V) Continuous (3 x 440-480 V) Intermittent (3 x 440-480 V) Maximum cable size Mains, motor Maximum input current Continuous (3 x 380-440 V) Intermittent (3 x 380-440 V) Continuous (3 x 440-480 V) Intermittent (3 x 440-480 V) EMC and brake chopper EMC filter type Built-in brake chopper Environment Power loss 1] Efficiency 1] MA01a MA02a MA03a MA04a MA05a 01A2 02A2 03A7 05A3 07A2 09A0 12A0 15A5 23A0 31A0 37A0 43A0 [kW] 0.37 0.75 1.5 2.2 3.0 4.0 5.5 7.5 11 15 18.5 22 [hp] 0.5 1.0 2.0 3.0 4.0 5.5 7.5 10 15 20 25 30 [A] 1.2 2.2 3.7 5.3 7.2 9.0 12 15.5 23 31 37 43 [A] 1.8 3.3 5.6 8.0 10.8 13.7 18 23.5 34.5 46.5 55.5 64.5 [A] 1.1 2.1 3.4 4.8 6.3 8.2 11 14 21 27 34 40 [A] 1.7 3.2 5.1 7.2 9.5 12.3 16.5 21.3 31.5 40.5 51 60 [mm2/ AWG] 4/10 16/6 [A] 1.9 3.5 5.9 8.5 11.5 14.4 19.2 24.8 33 42 34.7 41.2 [A] 2.6 4.7 8.7 12.6 16.8 20.2 27.4 36.3 47.5 60 49 57.6 [A] 1.7 3.0 5.1 7.3 9.9 12.4 16.6 21.4 29 36 31.5 37.5 [A] 2.3 4.0 7.5 10.8 14.4 17.5 23.6 30.1 41 52 44 53 C2/C4 No Yes [W] 17 25 34 48 58 74 104 127 213 285 358 466 [%] 97.3 97.8 98.0 98.3 98.5 98.3 98.3 98.4 98.2 98.3 98.2 98.2 1] The value is measured at 100% rated torque-producing current and 90% rated motor stator frequency according to IEC 61800-9-2 and EN 50598-2. Ordering model code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 i C230 FA3N0 4 0 1A2 E 2 0 F 4+ACXX 1N0 2 F2 ACBC 01 F0 Product group iC2-30 Product category FA Frequency converter air cooled Product type 3N Three phases 1N Single phase * See power rating on page 8-9 *Current rating 01A2 (1.2 A) 02A2 (2.2 A) 02A4 (2.4 A) 03A7 (3.7 A) 04A2 (4.2 A) 04A8 (4.8 A) 05A3 (5.3 A) 06A8 (6.8 A) 07A2 (7.2 A) 07A8 (7.8 A) 09A0 (9.0 A) 09A6 (9.6 A) 11A0 (11.0 A) 12A0 (12.0 A) 15A2 (15.2 A) 15A5 (15.5 A) 23A0 (23.0 A) 31A0 (31.0 A) 37A0 (37.0 A) 43A0 (43.0 A) Protection rating E20 IP20/Open Type EMC category F4 C4 category F2 C2 category F0 C1 category Brake chopper +ACXX None +ACBC Integrated Mains voltage 04 380-480 V AC 02 200-240 V AC 01 100-120 V AC Danfoss Drives · AD419729556676en-000302 9 Dimensions and weights Enclosure size 1 x 200-240 V Power [kW (hp)] 3 x 380-480 V 3 x 200-240 V 1 x 100-120 V MA01c 0.37-0.75 (0.5-1.0) 0.37 (0.5) MA02c 1.5 (2.0) 1.1 (1.5) MA01a 0.37-1.5 (0.5-2.0) 0.37-0.75 (0.5-1.0) MA02a 2.2 (3.0) 2.2-4.0 (3.0-5.5) 1.5 (2.0) MA03a 5.5-7.5 (7.5-10) 2.2-3.7 (3.0-5.0) MA04a 11-15 (15-20) 5.5-7.5 (7.5-10) 1] MA05a 18.5-22 (22-30) 11 (15) 1] Enclosure size Height [mm (in)] A a Width [mm (in)] B b MA01c 150 (5.9) 140.4 (5.5) 70 (2.8) 55 (2.2) MA02c 176 (6.9) 150.5 (5.9) 75 (3.0) 59 (2.3) MA01a 150 (5.9) 140.4 (5.5) 70 (2.8) 55 (2.2) MA02a 186 (7.3) 176.4 (6.9) 75 (3.0) 59 (2.3) MA03a 238.5 (9.4) 226 (8.9) 90 (3.5) 69 (2.7) MA04a 292 (11.5) 272.4 (10.7) 125 (4.9) 97 (3.8) MA05a 335 (13.2) 315 (12.4) 165 (6.5) 140 (5.5) 1] 5.5-11 kW will be available soon. 2] The potentiometer on the local control panel extends 6.5 mm (0.26 in) from the drive. B b C Depth 2] [mm (in)] C 143 (5.6) 157 (6.2) 158 (6.2) 175 (6.9) 200 (7.9) 244.5 (9.6) 248 (9.8) aA Weight [kg (lb)] 1.0 (2.4) 1.3 (2.9) 1.1 (2.4) 1.6 (3.5) 3.0 (6.6) 6.0 (13.2) 9.4 (20.7) Scan QR for product information Using your smart device, scan the QR code on the front label of the iC2-Micro drive, to get product information fast. You will go straight to the product store where you can access: · Product model code and series number · Product description · Technical specifications · Manuals, brochures and fact sheet · Certificates · Engineering drawings · Product image files · Accessories and spare parts 10 Danfoss Drives · AD419729556676en-000302 Accessories Category IP21/Type 1 conversion kit NEMA 1 conversion kit Decoupling plate mounting kit Connector for common DC and brake resistor Adapter HMI and related accessories Description IP21/Type 1 conversion kit, MA01c IP21/Type 1 conversion kit, MA02c IP21/Type 1 conversion kit, MA01a IP21/Type 1 conversion kit, MA02a IP21/Type 1 conversion kit, MA03a NEMA 1 conversion kit, MA01c NEMA 1 conversion kit, MA02c NEMA 1 conversion kit, MA01a NEMA 1 conversion kit, MA02a NEMA 1 conversion kit, MA03a NEMA 1 conversion kit, MA04a NEMA 1 conversion kit, MA05a Decoupling plate mounting kit, MA01c Decoupling plate mounting kit, MA02c Decoupling plate mounting kit, MA01a Decoupling plate mounting kit, MA02/03a Decoupling plate mounting kit, MA04a/05a Connector for common DC/brake resistor Quick Adapter USB-C/RJ45 OAX00 Control panel 2.0 OP2 Surface mounting kit OA2 Flush mounting kit OA2 Control panel cable 1.5 m OA2 Control panel cable 3 m OA2 Flush mounting Surface mounting Code number 132G0188 132G0189 132G0190 132G0191 132G0192 132G0195 132G0196 132G0197 132G0198 132G0199 132G0200 132G0201 132G0202 132G0203 132G0204 132G0205 132G0206 132G0207 132G0326 132G0234 132G0235 132G0236 132G0237 132G0238 Control Panel 2.0 OP2 This external control panel option gives you: · 2" screen with more information displayed · Multilingual display showing parameters, selections, and status for easy understanding · Visual LEDs to clearly indicate drive status · Parameter copy and download for easy commissioning · Remote mounting kit option for cabinet door installation with IP55 protection rating Easy to connect Danfoss Drives · AD419729556676en-000302 11 MyDrive® Suite ensures your digital tools are only one click away MyDrive® Suite brings all your tools together to support you during engineering, operation and service. What is MyDrive® Suite? It's a tool providing a single point of access for the other digital tools supporting you during engineering, operation and service, thereby covering the whole life cycle of the drive. Based on your needs, the tools are accessible via different platforms. They can be integrated into your system and business processes to enable a worldclass end-to-end experience with full flexibility. Your data is synchronized between the tools, and by sharing the same data backend, information is always correct and up to date. Our suite of software tools is designed to ensure you easy operation and the highest level of customization of your AC drives. Whether you're a beginner or a pro, you have everything you need to go from selecting to programmability of a drive. Try MyDrive® Suite today: suite.mydrive.danfoss.com Easy to use · One tool suite · One common look and feel · Single login to all tools · Seamless usage across devices and touchpoints · Platform enables coherent workflows · Data synchronization between tools. There is no need to enter information twice, which means your information is always correct and up to date · Search and smart filtering · Tutorials and documentation Keeps your data safe · Data security through user levels and authentication · End-to-end secure communication Fits your needs · Data integration into your tools and systems · APIs and open interfaces facilitate third-party applications or branded versions · The tools are available as web app, desktop application, dedicated tablet and smartphone app, all with offline functionality. No internet connection is required once the tool is installed to your device MyDrive® Suite 12 Danfoss Drives · AD419729556676en-000302 Convenient and fast Digital tools empower you Need help to design your application, or select, set up, and maintain your drive? Danfoss provides a pallette of digital tools to give you the information you need, at your fingertips. No matter which stage of the project you are at. Select and configure your drives · Select the right AC drive based on motor and load characteristics · Find general product, segment and application information of VLT® and VACON® drives Available tools · MyDrive® Select Select and dimension your drive based on calculated motor load currents as well as current, temperature and ambient limitations. MyDrive® Select matches your business needs with Danfoss Drives products. · MyDrive® Portfolio This smart device app gives you a full overview of all Danfoss Drives products and their documentation. Set up and service your drives · Set up your drives to operate according to your requirements · Monitor drive performance throughout the entire lifecycle of your drive Available tools · MyDrive® Insight Connect to one or more drives from a PC. Provides a simple and intuitive interface for easy commissioning and monitoring Validate performance of your drives · Analyze the performance of your drives in relation to harmonics content · Calculate the energy savings to be achieved when using drives · Validate compliance to norms and standards Available tools MyDrive® ecoSmartTM Now it's easy to determine IE and IES classes according to IEC/EN 61800-9, for VLT® and VACON® drives alone and in combination with a motor. MyDrive® ecoSmartTM uses nameplate data to perform the efficiency calculations, and produces a pdf report for documentation. Online tool: ecosmart.danfoss.com App: MyDrive® ecoSmartTM MyDrive® Harmonics Estimate the benefits of adding harmonic mitigation solutions from the Danfoss product portfolio and calculate predicted system harmonic distortion. This tool provides a quick indication of installation compliance with the most recognized harmonic norms, and mitigation recommendations. Danfoss Drives · AD419729556676en-000302 13 DrivePro® Life Cycle services Delivering a customized service experience! We understand that every application is different. Having the ability to build a customized service package to suit your specific needs is essential. DrivePro® Life Cycle Services is a collection of tailormade products designed around you. Each one engineered to support your business through the different stages of your AC drive's life cycle. From optimized spare-part packages to condition-monitoring solutions, our products can be customized to help you achieve your business goals. With the help of these products, we add value to your application by ensuring you get the most out of your AC drive. When you deal with us, we also offer you access to training, as well as the application knowledge to help you in planning and preparation. Our experts are at your service. drivepro.danfoss.com ACTIVE INACTIVE 14 Danfoss Drives · AD419729556676en-000302 LIMITED NEW You're covered with DrivePro® Life Cycle service products DrivePro® Extended Warranty Long-term peace of mind Get the longest coverage available in the industry, for peace of mind, a strong business case and a stable, reliable budget. You know the annual cost of maintaining your drives, up to six years in advance. DrivePro® Spare Parts Plan ahead with your spare part package In critical situations, you want no delays. With DrivePro® Spare Parts you always have the right parts on hand, on time. Keep your drives running at top efficiency, and optimize system performance. DrivePro® Exchange The fast, most cost-efficient alternative to repair You obtain the fastest, most costefficient alternative to repair, when time is critical. You increase uptime, thanks to quick and correct replacement of the drive.to-date. You receive an on-site evaluation, an upgrade plan and recommendations for future improvements. To learn which products are available in your region, please reach out to your local Danfoss Drives sales office or visit our website Local contacts drivepro.danfoss.com Danfoss Drives · AD419729556676en-000302 15 iC2-Micro is the convenient drive that gives you a new way to optimize efficiency and cost. With its compact design, it saves panel space to reduce system cost. Since it is compatible with diverse motor technologies such as induction, IPM and SPM, you can freely select the best-fit motor for your application. It's easy to commission, since it's equipped with startup wizards and application-oriented parameter groups. What are you waiting for? Here is the compact drive that's reliable and flexible, ready to power your pumps, fans, conveyors and mixers, textile machinery, palletizers, and packaging machines. Follow us and learn more about AC drives AD419729556676en-000302 | © Copyright Danfoss Drives | 2024.01 Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.
drive.to
DrivePro® Services | Danfoss
Danfoss Drives: World-leading drive manufacturer | Danfoss
MyDrive® ecoSmart
MyDrive® Suite
FocusOnDrives blog | Danfoss
MyDrive® ecoSmart
MyDrive® Harmonics
Contacts list | Danfoss