Appearance
The Mobilla MBuds 106 feature the following components:
- Left Ear Piece
- Right Ear Piece
- Multi-Function Touch Area
- Left Earpiece Charging Socket
- Right Earpiece Charging Socket
- USB Type-C Charging Port
- Microphone
- Charge/Storage Case
- Carry Strap
Charging
Charge/Storage Case
Connect the case to a charger using a USB Type-C cable to charge the Charge/Storage Case.
Earbuds
Place the earbuds in the charged Charge/Storage Case to charge the earbuds.
⚠️ Note: Please remove the sticker peels attached to the earbuds before charging them.
Connectivity
To Connect
Charge the Charge/Storage Case and the Earbuds to at least 70% before the first usage.
Pairing Process
- Take out the Earbuds from the Charge/Storage Case and place them in your ears.
- Go to the Bluetooth settings of your device and switch it on.
- Scan available devices.
- Connect 'Mobilla MBuds 106' to your device.
After completing the pairing process, the TWS earbuds will connect to your device automatically when you take them out of the charging/storage case.
Smart Touch Controls
Play/Pause
Single tap on the Multi-Function Touch Area.
Repeat Track
Double tap on the Multi-Function Touch Area of the left earbud.
Next Track
Double tap on the Multi-Function Touch Area of the right earbud.
Volume Control
To Increase Volume: Triple tap on the Multi-Function Touch Area of the right earbud.
To Decrease Volume: Triple tap on the Multi-Function Touch Area of the left earbud.
Call Management
To Answer/Hang Up Calls: Single tap on the Multi-Function Touch Area of either earbud.
To Decline Calls: Tap and hold on to the Multi-Function Touch Area of either earbud.
Power & Voice Assistant
Power On/Off
Long press for 4 to 5 seconds on the Multi-Function Touch Area.
Call Voice Assistant
Tap & Hold for 2 seconds to activate the Multi-Function Touch Area of either earbud.
Specifications
- Bluetooth Version: 5.3
- Music Playtime: Up To 25 Hours
- Environmental Noise Cancellation
- Sweat and Water Splash Resistant: IPX4 Rating
- 13mm Drivers
