Digital Services, Technology and Consulting | Reply
Instruction Manual for Trevot models including: TD40019OT 3 Light 22.5 IOnch Large Black Outdoor Wall Lantern Sconce, TD40019OT, 3 Light 22.5 IOnch Large Black Outdoor Wall Lantern Sconce, Wall Lantern Sconce, Lantern Sconce
TRUE FINE TD40019OT 719349305966 0719349305966 1009123487
File Info : application/pdf, 2 Pages, 466.16KB
DocumentDocumentOutdoor Wall Sconce Instruction Manual HARDWARE CONTENTS(shown actual size) ABA BBB CBC DBD Print in china PACKAGE CONTENTS A B PART A Fixture B Glass DESCRIPTION QUANTITY 1 4 Long monting x 2 screw Wire nut x 3 Long monting x 2 screw Mounting plate (Not actual size) x 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING · TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS. PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder. Customer Service: service@24h-reply.com ASSEMBLY INSTRUCTIONS 1. As shown in the figure on the right, 1 attach bulbs, glass and decorative part into the fixture body. Hardware Used A Fixture x1 B Glass x4 2. Attach the mounting plate (DD) to the 2 outlet box (not included) with the long mounting screws (CC). Hardware Used CC Long mounting screw x2 DD Mounting plate x 1 3. Strip 3/4 in. of insulation from wire ends. 3 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box. A B DD CC ASSEMBLY INSTRUCTIONS 4. Attach wire nuts (BB).Tape wire nuts (BB) 4 and wires together. Hardware Used BB Wire nut x3 BB 5. Align the 2 screws (AA) through the holes 5 of the back plate, and fix them with screw DD nuts Hardware Used AA Long mounting screw x 2 DD Mounting plate AA x 1 CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation. Print in china