Bin-Sense® Grain Storage Monitoring Solutions
User Guide for BIN-SENSE models including: 24107, 700050, 24107 700050 Direct Device, 24107 700050, Direct Device, Device
Support – Bin-Sense Grain Storage Monitoring
File Info : application/pdf, 2 Pages, 2.65MB
DocumentDocumentQuick Start Guide for Bin-Sense Direct Users 1. Install Batteries Remove the tape from the Bin-Sense Direct device. Remove the top cover. Install two AA batteries (included). Place the top cover back on the device. Secure the cover in place with the four included screws as shown. 2.Get the Mobile app Download the Bin-Sense Mobile App from the App Store (iOS) or Google Play Store (Android). 3. Connect your Bin-Sense Direct from the Mobile App Enable Bluetooth and location services for the Bin-Sense Mobile App. Open the app and login or Register New User. Follow the on-screen prompts to set up your account and create a site. Choose the Direct - Scan Cables option near the top of the screen. Select your Bin-Sense device's serial number from the list (located on the sticker on the back of the device) from the list. You're now ready to scan cables. 4. Scan cables and create bins At the bin, plug the sensing cable connector into your Bin-Sense Direct device. Tap the Scan Cables button in the app. Choose the Add Cables option to add the sensing cable(s) to a bin. You only need to do this the first time you scan a cable. Follow the prompts to select the site and bin where you want to add the sensing cable(s) You can create a new structure (or site) if you have not already done so by choosing Add Structure. Follow the prompts to add the structure (or site). If you want to add other bins to the app, select Add Structure. Your data is automatically synced to the Bin-Sense servers when you are connected to the internet. You can sync your data manually by swiping down at the top of the bin list. 5. Choose a bin from the list for more details Tap on a structure to bring up a bin summary. You can set the grain type and volume, as well as other general settings for the bin. From there you can navigate between Grid View, Table View and Map View. 6. View the heatmap and graph past readings In Grid View, tap on a bin to view the heat map for a particular bin. The heat map gives a visual indicator of your grain conditions. View past bin readings. Set the grain level by tapping on a sensor and setting it as covered or exposed. Tapping on sensors also gives the option to graph past sensor readings binsense.com @mybinsense