Enlighten, Empower, Enable - Davis Lighting
Davis Lighting Australia
Instruction Manual for DAVIS LIGHTING models including: Bola BAC, Bola BAA, Bola BAG, Bola BAG Bollard, Bola Bollard
File Info : application/pdf, 4 Pages, 1,023.20KB
DocumentDocumentBOLA Bollard This installation guide is valid for the following models: · Bola BAC BAA BAG 220107 Installation Instructions BAC BAA BAG PRIOR TO INSTALLATION · Read all instructions to prevent injury, electric shock or damage due to fire or mechanical hazards · See product label for supply specifications · Suitable for recessed or suspension mounting Inspect the luminaire and associated parts for any signs of defect, in particular fasteners, cables and the diffuser or glass lens DO NOT INSTALL THE LUMINAIRE IF IT APPEARS IN ANY WAY FAULTY Consult with the supplier / sales office for details regarding replacement CAUTION · Before commencing installation, turn off and isolate the electrical supply · Electronic control equipment must not be subjected to high voltages. DO NOT MEGGER between Live and Neutral · All cable / conduit terminations must be installed in accordance with the designated IP rating of this product · Suitable installation fastening methods should be employed to ensure the mounting points are not damaged when subjected to vibration and / or movement · This luminaire must be installed by qualified electrician in accordance with local rules and codes · This luminaire cannot be disassembled by non-professional persons · If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard · The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced · Prior to installation, products are to be stored in cool dry conditions 1. Install L bolts to fixing plate. INSTALLATION 2. Prepare the base & plant fixing plate. 3. Install base plate to the fixing plate & tighten it. 4. Install top head into the body & tighten with screws. **Step only applies to BAC 5. Connect mains cables with IP65 connector (not supplied). 6. Install bollard to the base plate & tighten with screws. WIRING BAC BAA BAG Warning! Do not wire dim cord to high voltage or dim function will fail. DIMENSIONS Model BACS1230 BACS1260 BACS1290 BACS2530 BACS2560 BACS2590 BAC1230 BAC1260 BAC1290 BAC2530 BAC2560 BAC2590 Model BAAS1230 BAAS1260 BAAS1290 BAAS2530 BAAS2560 BAAS2590 BAA1230 BAA1260 BAA1290 BAA2530 BAA2560 BAA2590 Dimensions (ø x H) Ø100×300 Ø100×600 Ø100×900 Ø100×300 Ø100×600 Ø100×900 Ø170×300 Ø170×600 Ø170×900 Ø170×300 Ø170×600 Ø170×900 Dimensions (ø x H) Ø100×300 Ø100×600 Ø100×900 Ø100×300 Ø100×600 Ø100×900 Ø170×300 Ø170×600 Ø170×900 Ø170×300 Ø170×600 Ø170×900 Model BAG1030 BAG1060 BAG1090 BAG2030 BAG2060 BAG2090 Dimensions (ø x H) Ø100×300 Ø100×600 Ø100×900 Ø100×300 Ø100×600 Ø100×900 MAINTENANCE The supply must be isolated before opening or accessing the luminaire. Product maintenance is critical to the products designed performance. Davis Lighting is not responsible for any product not maintained in accordance with the recommended procedure or intervals. It is recommended that a biannual cleaning cycle is implemented. Inspect optical surfaces for damage or crack. Products supplied with visors or covers must not be operate with a damaged visor or cover; it is recommended damaged visors or covers be replaced by a competent person immediately. Seals and electrical components such as wirings to be checked for deterioration. All photometric and electrical data published are of ±10% tolerance. Characteristics and specifications may change without notice. All electrical installations / connections should be carried out by a suitably qualified person. Application images are indicative only and may not contain actual Davis product. The information contained in this publication is typical and must not be interpreted as a guarantee of individual product performance. This product may contain substances that can be hazardous to the environment if not disposed of correctly. Electrical and electronic equipment should never be discarded along with general waste but should be separated for correct treatment and recovery. Packaging and waste materials should be recycled wherever possible. CONTACT Australia Head Office & Sales Davex Australia Pty Ltd Head Office: +61 (7) 3712 8988 Sales Offices: 1300 851 001 Fax: +61 (7) 3272 8988 Email: australia@davislighting.com Malaysia Head Office & Sales Davex Malaysia Sdn Bhd (114942-X) Phone: +60 (3) 5636 4348 Fax: +60 (3) 5636 4352 Email: malaysia@davislighting.com Singapore Head Office & Sales Davex Singapore Pte Ltd Phone: +65 6745 2511 Fax: +65 6745 5828 Email: singapore@davislighting.com davislighting.com / www.davislighting.com.au