User Manual for ACDC DYNAMICS models including: MJ-01-100W Lighting Camera Security Floodlight, MJ-01-100W, Lighting Camera Security Floodlight, Security Floodlight, Floodlight
Index of /Images/spec
Jan 6, 2022 — Solar Panel. 5. Screws. 3. Remote control. 6. Operating Manual. Light-control Detection. Installing take out lamp cap. The light turn on automatically.
Smart Camera. After hearing the voice prompt. System start up, please set ... SECURITY FLOODLIGHT. OPERATING MANUAL. Get verification code. Register. 3. 4. 7. 8.
LIGHTING CAMERA SECURITY FLOODLIGHT OPERATING MANUAL MJ-01-100W Operating Manual Packing List 1 Operating Instructions 1. Lamp Cap 2. Solar Panel 4. Installing Support 5. Screws 3. Remote control 6. Operating Manual Light-control Detection. 2 Installing AUTO take out lamp cap Press the key [AUTO] The light turn on automatically Then, tightening the waterproof wire and placing the solar panel towards the sunligt, the light will turn off automatically and the charging indicator will flash regularly. It means the light control functions is working well. Work indicatting of camera Charging indicator (Please tighten the wire in the direction of the arrow) 3 Key Instruction of Remote Control Auto mode Tightening the wateroproof wire and pressing the key "AUTO", the light will autmatically turn on for 4 hours in the dark. After 4 hours of light-operated mode, it will switch tomradar mode. (The remote control has memory fucntion, you can set only once) Remote- Control the specified functions are shown below. Turn off Press over 3 seconds to forced light mode. (if you need to turn on the light during the day) The light will autamitically turn on in the dark and turn off to charge in the day (suggest to use in the region with ubundant light supply) After 3 hours of light operated mode, it will switch ro radar mode After 4 hours of light-operated mode, it willl switch to radar mode. (Suggested to use) Increase the brightness Radar mode for all night Decrease the brightness Timed 3 hours Timed 8 hours Turn on / off of the monitor Timed 5 hours Reset Button: For the first time use or change of WIFI account, long press for more than 5 seconds. Important Notes 1. Please do not connect 220V AC to avoid damaging the solar lamp. 2. Please do not disamble the lamp to avoid affecting the warranty. 3. Please clean dust on the solar panel surface every 3 months to avoid affecting the power generated afficiency. 4 Monitor Configure Network ONE: Connect WIFI Connect WIFI with your mobile phone, and, make sure the network signal is good Tips: please make sure the lamp, cellphone and WIFI are within (3 meters during configuring network) TWO: Download "ACDC Smart App" scan QR code at right right to get the APP, or search "ACDC Smart App" in App Store or Google play (Tips: Available for Android and IOS) THREE: Register APP please use the cellphone number or email address to register an account in"ACDC Smart App" Scan and download APP Click register 1 Register 2 Enter mobile phone number Get verification code ****** Get verification code Get verification code 3 Enter correct verification code 4 FOUR: Turn on the monitor switch Monitor Switch: Press the button then red indicator light will turn on. the light source will flash twice in the meantime. After 25 seconds, you will hear the voice prompt" the system Start-up, 5 please configure network" 6 Reset: pressing over 5 seconds then you will hear " Dong-dong-dong" the light source will flash twice in the meantime. It indicates the monitor has been reset successfully. 5 Monitor Configuration Network FIVE: Add Device Open the APP and follow the steps below 9 Click 7 Add Device 8 Click Smart Camera Scan the QR code 10 13 After hearing the voice prompt System start up, please set nertwork connection you can click next step. Nex step 11 12 123456 Enrter the correct WIFI password, then click affirm 15 14 Click done and the camera is online 6 Installing Fix the product on the wall with expansion screws. The installation height is suggested to be be 3-5 meters. solar panel Lamp cap Make sure the solar panels are installed at the correct angle and they will not be blocked by the obstacles from the sunlight. north north north 35° south 100% charging efficiency 10° south 75% charging efficiency 60° south 50% charging efficiency Tips: 1. Installation direction of the solar panel is 5-10 degrees south to west, and angel of 35 degrees with the horizontal place. 2. Please install the solar panel in the sun direction to avoid affecting the power generation efficiency. 3. Please ensure the installation is stable. Functional Specification 7 Main function of APP Live video Settings (Settings for sharing, stroring removing devices, etc.) Take photos Talk back Playback video Record video Motion detection alarm Light switch and timed light Other Functions Change username. When changes the username you should remove device in settings. After successuly removed, you can use other username to log in Click Remove Device Share Device Share device, When shares device to others, the shared user should register an account in "ACDC Smart App"the master user can add the account of the shared user in settings. Click Add Sharing Important Notes 8 Storage settings. Recording mode includes "even recording" and "non- stop" You can select different mode according to your needs. Non-Stop it is suggesrted to select "event recording" mode because it save electricity. Event Recording Motion detection alarm. You can select low medium or high sensitivity according to your needs. Checking motion detection alarm information, please click "Me" in main page then "message center" and "Alarm". Click Messages Center Click MeAdobe PDF library 16.03