User Guide for MUNSON HEALTHCARE models including: Nuance Dragon Medical One, Dragon Medical One, Medical One, One
Provider DAX Copilot | Munson Healthcare
DAX Copilot: Do Not Disturb for Providers Nuance Dragon Medical One EDUCATION DAX Copilot is interrupted if anything takes over the microphone, such as an incoming call. Do Not Disturb can be used manually or can be set to automatically run any time the PowerMic Mobile app is in use. Manually Enable Do Not Disturb 1. From any screen, swipe to open the Control Center. 2. Tap Focus. 3. Tap Do Not Disturb from the Focus modes. 4. Do Not Disturb is enabled. 5. Follow the steps again to disable Do Not Disturb after the patient encounter is completed. Note: Calls/messages from favorite contacts may override the Do Not Disturb setting. To limit all interruptions, ensure there are no exceptions added to the Do Not Disturb feature. Automatically Enable Do Not Disturb 1. From any screen, swipe to open the Control Center. 2. Tap Focus. 3. Tap the ellipses (...) to the right of Do Not Disturb. 4. Tap Settings. 5. Scroll down and tap Add Schedule. 6. Select App. 7. Find and select the PowerMic Mobile app. 8. Under SET A SCHEDULE, the PowerMic Mobile app is now listed as On. · Do Not Disturb will automatically enable while the PowerMic Mobile app is in use. · Do Not Disturb will automatically disable when the PowerMic Mobile app is minimized or closed. Clinical EHR Education, October 16, 2024, BPJ (P) 1 of 1Microsoft Word for Microsoft 365