AZZA PSAZ-850G14 850W Power Supply User Manual
Model: PSAZ-850G14
Brand: AZZA
Product Information
The all-new PSAZ-850G14 is an 80Plus Gold Certified gaming power supply.
- Fully Modular Cables for Quick and Easy Installation.
- Fan Quiet operation across a wide range of loads.
Features
- Complied with ATX12V V2.4, EPS12V V2.92 Standard
- 80 PLUS Gold certified, with 87% (115VAC) / 89% (230VAC) efficiency or higher under typical loads.
- High-Quality Components.
- Universal AC input from 100V-240V.
- 120mm fan: Quiet operation across a wide range of loads.
- Fully Modular to reduce clutter and improve airflow.
- Protection: UVP, OVP, OPP, OCP, SCP.
- Safety: FCC, CE, RoHS, CB, TUV, cTUVus.
- 3-Year Warranty.
Specifications
| Specification | Details |
|---|---|
| Model Number | PSAZ-850G14 |
| Output | 850W |
| Type | ATX 12V V2.40/ EPS 12V V2.92 |
| Cable Management | Fully Modular |
| Efficiency | 80 PLUS Gold (UP to 87%) |
| AC Input | 100-240V AC, 50-60Hz, 10A Max. |
| Fan | 120mm HYB |
| Typical Load Fan Noise (50% Loading) | <35 dBA |
| Full Protection | UVP/OVP/OPP/OCP/SCP |
| Safety Certifications | FCC/ CE/ RoHS/ CB/ TUV/cTUVus |
| Dimensions (L x W x H) | 150x160x86mm |
| Package Dimensions | 350x225x115mm |
| Net Weight | 2.55 kg |
| Gross Weight | 2.68 kg |
| Connectors | 20+4 Pin Motherboard: 1 |
| 8 (4+4) Pin CPU: 2 | |
| 8 (6+2) Pin PCI-E: 4 | |
| Molex: 3 | |
| SATA: 6 | |
| FDD: 0 |
Connector Diagram
The power supply unit features a modular interface for connecting cables. The connectors are labeled as follows:
- 1. M/B Connector (20+4P): For Main board connection only.
- 2. CPU & PCI-E Connectors: For CPUs or PCI-E devices.
- 3. Peripheral (IDE/SATA) Connectors: For HDDs, optical drives, and other internal devices.
Package Contents
The package includes the following cables:
- M1-03 Molex3: 1 piece
- M1-03- 90 degrees SATA: 2 pieces
- M1-08 CPU (4+4)pin: 2 pieces
- M1-08 PCIE (6+2)x2: 2 pieces
- 24pin-m1-06: 1 piece
Cables
Detailed cable specifications:
- M1-03: A cable with multiple connectors, total length approximately 450mm, with secondary branches of 150±5mm.
- M1-03 (SATA): A cable with multiple SATA connectors, total length approximately 450mm, with secondary branches of 150±10mm.
- M1-08 (CPU/PCI-E): A cable approximately 500mm in length, with multiple connectors.
- M1-08 (PCI-E): A cable approximately 600mm in length, with multiple connectors.
- 24pin-m1-06: The main 24-pin ATX motherboard power cable, approximately 600mm in length.
Smart Fan Control
The power supply features intelligent fan control:
- Switch ON: Fan voltage varies with ambient temperature and output power.
- Switch OFF (Zero RPM Mode): Zero RPM mode allows the fan to remain off during low to medium loads. This technology uses internal PSU temperatures and power output levels to determine when active cooling is needed. The fan will automatically turn on when the PSU requires cooling, ensuring sufficient airflow without unnecessary noise.
The rear panel of the PSU has a switch for fan control, with a red arrow pointing towards the switch.
Installation
- Ensure the power supply's AC power cable is disconnected before installation.
- Place the power supply unit into the designated space within the computer case and secure it with screws.
- Connect the 24-pin power cable to the 24-pin socket on the motherboard.
- Connect the 8-pin +12V cable to the motherboard.
- A. If your motherboard has an 8-pin +12V socket, connect the 8-pin cable directly.
- B. If your motherboard has a 4-pin +12V socket, detach the 4-pin connector from the 8-pin cable and plug it directly into the motherboard.
- Connect the peripheral cables, PCI Express cables, and SATA cables to their appropriate sockets on the power supply unit.
- Verify that all cables are securely connected. Store any unused modular cables for future use.
