Sablute Wireless Keyboard Combo User Manual

Introduction

This user manual provides instructions for setting up and using the Sablute Wireless Keyboard Combo (MA31). The combo includes a wireless keyboard and a wireless mouse that share a single USB receiver.

Dimensions: Keyboard: 441mm (Length) x 242mm (Width) x 31mm (Height), 900g. Mouse: 115mm (Length) x 66mm (Width) x 41mm (Height), 64.5g.

Materials & Craftsmanship: 100g paper, double-sided four-color printing.

Setup Instructions

Step 1: Plug the USB receiver into your computer.

Step 2: Turn on the keyboard and mouse.

The keyboard and mouse will automatically connect to the computer. No driver installation is required.

Locating the USB Receiver: Open the cover on the keyboard/mouse to find the internal USB receiver and the battery compartment.

Note: The keyboard and mouse share one USB receiver. Take out the USB from the back of the mouse.

Keyboard Functions

General Keys

• Left Button
• Right Button
• Scroll Wheel
• Forward Button
• Back Button

Shortcut Keys

The keyboard features several shortcut keys for enhanced productivity:

• Play/Pause
• Volume Up
• Volume Down
• Mute
• Previous Song
• Next Song
• Calculator
• Email
• Seek
• Music
• Device Switching
• Microphone
• Sleep

Function Keys (FN Key)

The FN key can be used in combination with other keys to access additional functions:

• FN + Emoji: Emoji function
• FN + Volume Up: Increases volume
• FN + Reduce screen brightness: Decreases screen brightness
• FN + Increase screen brightness: Increases screen brightness
• FN + Cut: Cut function
• FN + Copy: Copy function

Indicator Lights

• NUM LOCK: The Num Lock indicator turns green when activated.
• Caps LOCK: The Caps Lock indicator turns green when activated.
• Fn Lock: When lit, the FN function remains active by default.

Keyboard Specifications

• Button switch life: 10 million times
• Voltage: 3.0V

Mouse Functions

• Left Button
• Right Button
• Scroll Wheel
• Switch Lens
• USB Receiver Slot

Mouse Specifications

• Length: 115mm
• Width: 66mm
• Height: 41mm
• Weight: 64.5g
• Voltage: 1.5V

Troubleshooting & FAQ

Q1: The keyboard and mouse cannot be connected.

A1:

• Keyboard: Ensure the keyboard is switched on. Press and hold 'Esc' + '=' for three seconds until the LED indicator flashes rapidly. Plug the 2.4GHz USB receiver into the computer. Place the keyboard within 10 cm of the receiver for pairing. Pairing is successful when the light turns off.
• Mouse: Turn on the power switch at the bottom of the mouse. Press and hold the left button, right button, and scroll wheel button simultaneously. The light at the bottom of the mouse will illuminate. Insert the USB receiver into the computer and place the mouse within 10 cm of the receiver for pairing.

Q2: What should I do if the keyboard gets delayed or stuck?

A2:

• Check for nearby 2.4GHz devices (e.g., routers) that might interfere with the connection.
• Ensure there is no full metal case blocking the signal.

Customer Support

Contact Information:

• Email: sabluteservices@outlook.com
• Website: sablute.com/pages/contact
• Phone (US): 1-888-858-1618 (Monday-Friday, 9am-6pm, with a break from 1pm-2pm)

Sablute Purchase Benefits:

• 30-Day Money-Back Guarantee
• 90-Day Free Replacement
• Hassle-Free Warranty Without Returning
• Lifetime Customer Support

For FAQs and more information, please visit sablute.com.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.