Vortex Portable Wireless Speaker

Instruction Manual

Thank you for purchasing the Vortex Wireless Speaker. This manual provides more information about this wireless speaker. Please read the instructions before using.

Product Overview

Front: Features the BASS JAXX logo, product name "VORTEX", "PORTABLE WIRELESS SPEAKER", and "Instruction Manual". An image shows the front of the speaker with a mesh grille.

Back: Shows the back of the speaker with an ON/OFF switch, LED indicator, and Micro USB charging port.

Package Contents

Vortex Wireless Speaker x 1pc
Micro USB Charging Cable x 1pc
Instruction Manual x 1pc
Carabiner x 1pc

Operation

Power On/Off

Power on: Press and hold the ON/OFF button for more than 3 seconds.

Power off: Press and hold the ON/OFF button for more than 5 seconds.

Reconnect Wireless Speaker

When powered on, the wireless speaker will automatically connect with the last successfully paired device.

Charging your Wireless Speaker

Note: For your safety, please always use an appropriate 5V input charger/adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.

Use the Micro USB charging cable provided with this wireless speaker.
Connect the Micro USB plug to the Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
The LED indicator will turn red while charging and will turn off once fully charged.

Note: You must select a qualified charger from a regular manufacturer. You must charge the Wireless speaker if it has not been used for more than 12 months.

Pair Wireless Speaker with your Mobile Device

Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
Power on the wireless speaker.
Activate the Bluetooth function on your phone within range and select "BT Carabiner Speaker" from the list shown.
You will hear a beep sound when pairing is successful.

Function: Pause / Play Music: Short Press on ON/OFF button.

Technical Specifications

Driver Diameter: 52mm
Impedance: 4 Ohms
Power Supply: Li-ion Battery 3.7V 1200 mAh
Play Time: 8-10 Hours
Charging Time: 3-4 Hours
Bluetooth Range: 32.8 Feet

FAQ

If the Wireless speaker cannot be paired with your device: Ensure that your speaker is in pairing mode or reconnection mode. Ensure that the Bluetooth search function of your mobile device is activated.
If the Wireless speaker cannot be recharged: If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, ensure that it is connected and the USB port is powered.

Safety Instructions for the Lithium Battery and Charging the Product

The input voltage to the product is DC 5V 1A.
In order to charge the product in a safe manner and reliable conditions, please only adopt certified appropriate charger/adapter for charging the product.
Only charge the product at ambient temperatures between 10°C (50°F) and 40°C (104°F).
Do not heat above 70°C (158°F), e.g., do not expose to sunlight or throw into fire.
Switch off the product after use.
When the device is fully charged, disconnect the charger from the device and unplug the charger from the power outlet. Do not leave charging overnight.
Please note that Zeeva International Limited will not take any responsibility for any wrong operation (e.g., Voltage higher than 5V) as this may result in severe injury or loss of property, and they cannot control the operating process during the time the user is using this product.
In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development, or smoke development.

CAUTION:

Do not fully submerge in water. This item is IPX4 resistance only.
Keep the device dry. Avoid dusty and dirty environments. Using the device in these environments may damage the circuitry.
Do not use the device during thunderstorms to avoid any lightning-related damage or injury.
Do not attempt to disassemble or remanufacture the device, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards.
Keep the device away from excessive heat sources and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. The device may even explode in extreme overheating circumstances.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2ADM5-SP-0907

Class 1 LED product

Keep all relevant information for future reference

SP-0907

1 922343 350200

Distributed by 1616 Holdings, Inc. 701 Market Street, Suite 200 Philadelphia, PA 19106

Made in China

Models: SP-0907, SP0907, 2ADM5-SP-0907, 2ADM5SP0907, 393560211880 Vortex Portable Wireless Speaker, Vortex Portable Wireless Speaker

Google Docs
Google Drive
Download [pdf]
Download Optimized

File Info : application/pdf, 1 Pages, 1.66MB

SP-0907-Users-Manual-Zeeva-International-2adm5-sp-0907-ex-1-10 Adobe Illustrator 25.2 (Windows) Adobe PDF library 15.00

Related Documents

	SP-0223 IM Retro Wireless Speaker: Instruction Manual & Specifications Comprehensive instruction manual for the BASS JAXX SP-0223 IM Retro Wireless Speaker. Includes setup guide, Bluetooth pairing, FM radio operation, charging instructions, technical specifications, safety warnings, and FCC compliance information.
	BASS JAXX GLEAM LED Wireless Speaker SP-0185 Instruction Manual Official instruction manual for the BASS JAXX Gleam LED Wireless Speaker (Model SP-0185). Learn how to set up, pair, charge, and use your speaker, including technical specifications and safety information.
	Dancing Water Speaker Instruction Manual Instruction manual for the Dancing Water Speaker by BASS JAXX, detailing product overview, power on/off, pairing instructions, FAQ, technical specifications, and safety information.
	BASS JAXX SP-0068 Tower Wireless Speaker Instruction Manual Comprehensive instruction manual for the BASS JAXX SP-0068 Tower Wireless Speaker, covering setup, pairing, charging, technical specifications, safety, and FCC compliance.
	Tempo Wireless Speaker Instruction Manual Instruction manual for the Tempo wireless speaker by BASS JAXX, detailing product overview, package contents, power on/off, charging instructions, Bluetooth pairing, technical specifications, and FAQs.
	SP-0261 Wireless Speaker Instruction Manual Instruction manual for the SP-0261 Wireless Speaker by BASS JAXX, detailing product overview, pairing, charging, technical specifications, modes (Bluetooth, FM, TWS), FAQ, and FCC statements.
	APEX LED Wireless Speaker Instruction Manual - BASS JAXX Official instruction manual for the BASS JAXX APEX LED Wireless Speaker. Learn how to set up, pair, charge, and troubleshoot your speaker. Includes technical specifications and safety information.
	BASS JAXX Endurance Wireless Speaker Instruction Manual User guide for the BASS JAXX Endurance Wireless Speaker. Learn how to set up, pair via Bluetooth, charge, and troubleshoot your wireless speaker. Includes technical specifications and safety information.