IROAD FX2 PRO Quick Start
Version 1.0 (JAN. 2024)
Precautions
- Do not arbitrarily disassemble or modify the product. This will be considered user's fault and will void the warranty.
- Do not handle the product while driving, as it can cause serious accidents. Please operate the product in a safe place after parking.
- Turn the recorder off when exposed to direct sunlight or used for too long. Otherwise, malfunction or breakdown will occur.
- Do not remove the SD card or turn off the power during the firmware update. It may cause malfunction or loss of data.
- Use of genuine IROAD memory card is recommended. Failure to use a genuine SD card may cause error or malfunction.
- Real-time recording and playback via Wi-Fi could be delayed depending on the specifications of your smart device.
- Motion detection is initiated by an image sensor software. Errors may occur depending on the surrounding environment and the voltage of the car.
- If the GPS signal is good, ADAS will activate when the speed of the car is above the set speed. The surrounding environment may cause errors.
- Incorrect installation of the uninterrupted power cable may cause malfunctions. Installations must be different depending on the power type of the vehicle. Please contact a professional engineer if you need help to install it.
Warranty
| PRODUCT NAME | SERIAL NUMBER | DATE OF PURCHASE |
|---|---|---|
| SUPPLIER | SHOP NAME | CONTACT NUMBER |
|---|---|---|
- IROAD Global guarantees the quality of the item.
- Only signed members can use this card. Transferring and lending the card to others is strictly not allowed.
- No after-sale-service will be provided in case the card is lost.
- Warranty period of each part is as follows: Product (Front/Rear Camera): 1 Year, Option Camera (Interior Infrared/External Waterproof Camera): 1 Year, Memory Card: 6 Months, Fuse Cable, Rear Cable, Wi-Fi Dongle: Does Not Cover.
Specifications
| Model | IROAD FX2 PRO |
| Image sensor | Front: Sony STARVIS (IMX307) Image Sensor, Rear: 2.0 Mega Pixel CMOS Image Sensor |
| Resolution/Frame | Front: FULL HD 1920x1080p / Rear: FULL HD 1920x1080p |
| Viewing angle | 140° |
| Wi-Fi supported | Smartphone Playback/Settings, Firmware Automatic Update |
| Wi-Fi button | Activate "Stand-by Mode for Registration" |
| Audio input | Embedded MIC |
| Video/Audio | H.264/ADPCM |
| Vibration Sensor | 3-axis Acceleration Sensor |
| Voice guidance | Effect sound/buzz alert to inform the condition of the device, Voice guidance supported |
| Built-in GPS | Synched with Google Maps, Records location and speed of the vehicle |
| Storage medium | Micro SD 32GB ~ 256GB (Class10) |
| Recording mode | Driving, Event (Impact), Parking (Timelapse, Motion Detection) |
| Uninterrupted power | Uninterrupted Power (Low voltage cut-off, overheating prevention is embedded) |
| Power supply | DC 12V/24V |
| Operating temperature | -10~60° C (Storage temperature: -20 ~ 70°C) |
| Humidity | 10~95% |
| Dedicated PC viewer | Win10 (64Bit), Mac (OS X 10.13 or higher) |
| Application | Android 10.0, iOS 14.0 or higher: Firmware update supported |
Package
Basic Components
- Front Camera / Cradle
- Rear Camera / Cradle
- Uninterrupted Fuse Cable
- Rear Camera Cable
- IROAD Genuine MicroSD
- Wi-Fi USB Dongle
- User Manual / Warranty
• The Basic components may change without prior notice.
Optional Items
- OBD-II Power Cable (Non-Electric / Electric)
- Cigar Jack Power Cable
- USB MicroSD Reader
Using the Mobile App
Android Device
- On your Android device, open the "Google Play Store" and download and install "IROAD DASH CAM".
- After running the application, register your device. Activate the registration stand-by mode by pressing the Wi-Fi registration button "Stand-by mode for the registration" (Voice guidance).
- Tap Connection. The SSID and model will be shown. Once the user selects the device, it will be registered & connected.
iOS Device
- On your iOS device, open the "App Store" and download and install "IROAD DASH CAM".
- After running the application, register your device. Activate the registration stand-by mode by pressing the Wi-Fi registration button "Stand-by mode for the registration" (Voice guidance).
- Tap Connection - follow the on-screen instructions to connect the product to your smartphone.
- Select the Wi-Fi Network - From the Wi-Fi setting menu on your smartphone, select the Wi-Fi network starting with "IROAD".
- Enter Password - Enter "qwertyuiop" in the password field. Now the product is connected to your iOS device via Wi-Fi. The password is the first row of the alphabet on the keyboard.
IROAD DASH CAM
IROAD DASH CAM
iroadkr.com
