Stoltzen Cyclone 1004 Mini DSP Quick Guide
Welcome to the Quick Guide for the Stoltzen Cyclone 1004 Mini DSP, a digital audio processor designed for various audio applications.
1. Front Panel Overview
The front panel of the Stoltzen Cyclone 1004 Mini DSP features the following indicators and ports:
- WIFI: An optional antenna for Wi-Fi connectivity.
- DC 12V: Connection for the 12V DC power supply.
- USB: A port designated for system debugging.
- ETHERNET: An Ethernet port used for console connection and configuration.
- SYS: System status indicator light. It flickers when the system is operational.
- PWR: Power indicator light, showing the device is powered on.
2. Back Panel Connections
The back panel provides the primary audio and power connections:
- MIC 1-8: Eight microphone inputs. These inputs support phantom power (+48V) and adjustable gain.
- IN 1-2: Two balanced audio inputs for line-level signals.
- OUT 1-4: Four balanced audio outputs for connecting to amplifiers or other audio devices.
3. Software Download and Connection
To control and configure the processor, you need to download the dedicated software:
- Open a web browser and navigate to the processor's IP address. The default IP address is 192.168.1.200. Ensure your computer and the processor are connected to the same network.
- On the web interface, locate and click the "DOWNLOAD" button to get the Windows client software.
- Install the software by following the on-screen instructions.
For wireless connectivity, the device supports Wi-Fi hotspots. Connect to the hotspot named "Audio-****" using the password "87654321". The Wi-Fi IP address for this connection is 192.168.2.1. A mobile client application is also available for download from the Stoltzen website.
4. Software Login Procedure
Once the software is installed and running:
- Click the search button within the software to discover connected devices.
- Double-click the IP address of the Stoltzen Cyclone 1004 Mini DSP you wish to access.
- A login prompt will appear. Enter the default username 'admin' and password '123456'.
- Upon successful authentication, the IP address display in the software will change from red to green, indicating a stable connection.
You can now proceed to configure the processor. For advanced settings and detailed instructions, please consult the help menu within the software documentation.
5. Technical Specifications
Parameter | Value |
---|---|
EIN (20Hz~20kHz, 22dB gain) | <-110dBu |
Dynamic range (20Hz~20kHz, 0dB) | > 100dB |
Maximum output (Balance) | 18dBu |
Output impedance (Balance) | 100 ohm |
Sampling rate | 48KHZ |
A/D-D/A converter | 24bit |
Phantom power | +48 VDC |
Maximum gain | 40dB |
Input impedance | 20k ohm |
Frequency response (20Hz~20kHz @ +4dBu) | ±0.2dB |
THD+N (1kHz @ +4dBu) | < 0.01% |
Maximum input level | 18dBu |
Channel isolation | 90dB |
Floor noise (A weighted) | <-88dBu |
Power supply | DC 12V/<24W |
❗ Attention
Please observe the following important notes for optimal use and safety:
- Ensure the equipment is operated in a well-ventilated area to allow for adequate heat dissipation.
- In environments with high humidity or moisture, or when the device will not be used for an extended period, it is recommended to disconnect the power supply.
Packing List
The package for the Stoltzen Cyclone 1004 Mini DSP includes the following items:
Item | Quantity |
---|---|
Quick guide | 1 |
Power adapter | 1 |
6-Pin phoenix terminal | 6 |
Screwdriver | 1 |
3-Pin phoenix terminal | 2 |