Instruction Manual for CreatBot models including: PEEK-300 High Performance PEEK 3D Printer, PEEK-300, High Performance PEEK 3D Printer, Performance PEEK 3D Printer, 3D Printer, Printer
CreatBot PEEK-300 1.Direct Annealing Temperature: 0-400°C Direct Annealing System (DAS), the world's first and extraordinary technology by CreatBot. Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. (The technology is patent protected and available by CreatBot only) 2.Smart Auto-rising dual extruders 500 The PEEK-300 equiped with CreatBot new technology smart Auto-rising dual extruders. Water cooling, DAS system, Auto-rising extruders. The dual nozzle temperature up to 500°C. You can print any 3D printer materials in the world. We can say it is best choice of polymer materials. 3.Hotbed 200 Common but necessary. Base of printing big models with no warping. 4. Hot Chamber 120°C Outstanding and important. The protector of no cracking printing. 5. Triple Heat Isolation Triple heat isolation is made of double insulation chamber, advanced insulation materials and vacuum double PC boards. It is guarantee of ultra performance and safety. 6. Cooling System Cooling system is one of the important parts to constitute the whole thermal system. It is made of (1) liquid cooling. Circulating liquid can be used effectively for a long time. (2) Air pump cooling. Air pump provide cold air from outside instead of hot air inside chamber. 7. HEPA Air Filtration The air filter system can adsorb impurities and gases that generated by printing special filament, more safe and environmental protection which is more suitable for house, school, office space. 8.Resolution 0.04mm 0.04mm is an available resolution for normal plastics, but it is an extraordinary resolution for high warping and high deformation materials. 3D printing high performance material need not only high temperature, but better cooling. For high resolution with high small details, high temperature will ruin layers to a mess if heat and cooling are not in a balance. 9. Material Performance Comparison Chart Product Parameter Printing Build Volume 300*300*400 mm Print Resolution 0.04 mm-0.4 mm Filament Diameter 1.75 mm Number of Nozzles Dual Extruder Print Speed 10-150 mm/s Nozzle Diameter 0.4 mm (0.3~1.0 mm optional) Engineering Plastics: PLA, TPU, PC, ABS, PA6, PETG, PVDF, TPU Filament Compatibility High temperature Material: PPSU, PEI (ULTEM), PA12, PSU, PPS, PA-CF, POM, PP Ultra-performance material: Medical grade PEEK, PEEK, PEKK, CF-PEEK (Carbon fiber), GF-PEEK (glass fiber), etc. Software Software Bundle Creatware, Simplify3D, Cura, Slice3r Operating Systems Win7/8/10, MacOS Print File Type STL, OBJ, AMF, Gcode Special Function Outage Restored Save data when power is off Filament Detection Pause printing when filament run out Direct Annealing System (DAS) Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. Heat insulation Triple heat insulation Emergency stop switch Support emergency stop High temperature accessories High temperature resistance motors, linear rails, belts and circuits to ensure long time high temperature printing. Temperature Nozzle Max. Temperature 500 Chamber Temperature 120 Platform Max. Temperature 200 Direct Annealing Temperature 0~400 Mechanical Cooling Air pump cooling & water cooling Platform PCB aluminum + PEEK print board Positioning Precision X Y axis 0.01mm, Z axis 0.0025mm Extruder Directly Drive Machine Construction Fully enclosed hot chamber Bed Leveling Manually/Automatic Electrical Input Power 200~240 V, 120A Max. Power 3 000 W Screen 4.3'' full color touch screen, multi-language Print Method USB Connectivity/USB Disk Size & Weight Machine Size 650*600*750 mm G.W 100 kg Packing Size 820*720*1080mm N.W 135 kg Specs Comparison With Other Brands CreatBot PEEK-300 Place of origin China Build Volume (mm) 300*300*400 Max Nozzle temperature 500 °C Max Chamber temperature 120 °C Max hot bed temperature 200 °C Temperature around the part is controlled 0-400 °C Min layer resolution 0.04 mm Number of extruder 2 Build platform Carbon fiber sheet Materials PEKK, PEEK, medical PEEK, Carbon-PEEK, ULTEM, PEI, PPSU, PA/CF, PC, PA Alloys, PA6, PA12, ABS, Carbon Fiber, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, TPU 65A,ETC. Machine size 650*600*750 Weight 120 kg Stratasys F370 Intamsys Funmat Pro410 Apium M220 USA China Germany 355*254*355 305*305*406 170*170*130 300 °C 450 °C 540 °C 90 °C 90 °C 160 °C None None 0-200 °C 0.013 mm 0.05 mm 0.1 mm 2 2 1 Ceramic Glass Medical grade material PEEK,PEI,PPSU, PA/CF, PC, PC Alloys, PA, ABS, PLA, ABS, ASA, PC-ABS, TPU 92A Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, Medical PEEK HIPS, TPU, PLA, PVA, ETC. 964*711*1 626 227 kg (with cabinet) 720*680*1 470 200 kg (with cabinet) 850*685*675 66 kgGPL Ghostscript 9.55.0