Instruction Manual for GLOBAL INDUSTRIAL models including: 436989 Lithium Iron Phosphate Portable Power Station, 436989, Lithium Iron Phosphate Portable Power Station, Iron Phosphate Portable Power Station, Phosphate Portable Power Station, Portable Power Station, Power Station, Station
Lithium Iron Phosphate Portable Power Station
Global Industrial™ Portable Power System, 54AH/2000W, 2765WH
File Info : application/pdf, 9 Pages, 36.68MB
DocumentDocumentb82045fc-0b136962-90871f19-f891407c TM TM User's manual Customer Service US: 1-800-645-2986 Manual del usuario Servicio de atención al Cliente US: 1-800-645-2986 Manuel de l'utilisateur Service à la clientèle Canada: 888-645-2986 Lithium Iron Phosphate Portable Power Station Model: 436989 Read the instructions carefully before use and follow the instructions pertaining to risk of fire, electric shock, or injury to persons. Keep these instructions in a safe location for future reference. For questions, visit globalindustrial.com or contact Customer Service at 1-800-645-2986 WARNINGS & PRECAUTIONS · Different electrical appliances have different voltage standards. Before use, please carefully check whether the rated voltage range of the product is consistent with the voltage range of the portable power station, otherwise, it may lead to dangerous situations. · After the battery is discharged to the cut-off voltage, continuing to discharge is called overdischarge. It can easily cause serious power loss in the battery, thereby greatly shortening its service life. Therefore, deep discharge should be avoided as much as possible when using the battery. And do charge in time. · The product should be kept away from fire, hightemperature environments, and humid and rainy environments during use and storage, otherwise it may lead to dangerous situations. · This product has a built-in high-voltage power supply, and non-professionals should not disassemble it by themselves. 1 · DO NOTdiscard the product at the end of its service life. Recycle the product according to local laws and regulations. · This product should be protected from rain, water immersion, and violent vibration during transportation. · It cannot be used at an altitude exceeding 2000m. · The product is AC output. Please do not insert your hands or hand-held metal conductors into the AC socket. · DO NOT drop, squeeze, or collide with the product, so as not to subject the product to external pressure, which may cause a short circuit of the internal circuit of the product and damage to the battery. · After use, please turn off the machine in time (the no-load power consumption will continue to consume battery power when the machine is on.) b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 User's Manual WARNINGS & PRECAUTIONS · This product and its accessories may contain some small parts. Please keep the product and its accessories out of the reach of children. Children may accidentally damage the product and its accessories, or swallow small parts, causing suffocation or other dangers, children or people with mental retardation need to use this product accompanied by their guardians. · DO NOT use the product during thunderstorms. This may cause product failure or electric shock. · If the product accidentally falls into the water during use, place it in a safe open area and do not turn it on again. · Please use the charging cable provided with the product to charge it, otherwise there will be a security risk. · The product must be securely and effectively grounded before use. IMPORTANT SAFETY INSTRUCTIONS Appliance coupler is used as the isolation means to isolate from the supply mains. DO NOT position the equipment to a location so that it is difficult to operate the disconnection device. · Read All the instructions before using the product. · To reduce the risk of injury, CLOSE SUPERVISION is necessary when the product is used NEAR CHILDREN. · Do Not put fingers or hands into the product. · Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons. · To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack. · DO NOT use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. · DO NOT disassemble the power pack, take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock. · To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed servicing. · When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way. · Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. · DO NOT expose a power pack to fire or excessive temperature. Exposure to fire or temperature above 130°C(of 265°F) may cause explosion. · Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. · Risk of Electric Shock. NEVER use power pack to supply power tools to cut or access to live parts or live wirings, or materials that may contain live parts or live wirings inside, such as building walls, etc. · DO NOT operate the power pack with a damaged cord or plug, or a damaged output cable. SAVE THESE INSTRUCTIONS 2 b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 User's Manual IMPORTANT SAFETY INSTRUCTIONS Grounding Instructions · This product MUST be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded in accordance with all local codes ordinances. CAUTION · Risk of Injury To Persons. DO NOT use this product if the power cord or the battery cables are damaged in any way. · Risk of Electric Shock. Connect ONLY to properly grounded outlets. · This device is not intended for use in a commercial repair facility. · Risque de blessure aux personnes. Ne pas utiliser ce produit si le cordon d'alimentation ou les câbles de batterie sont endommagés de quelque façon. · Risque de décharge électrique. Brancher l'unité uniquement à des prises de courant correctement mises à la masse. · Le dispositif n'est pas destiné à être utilisé dans un atelier de réparation commercial. WARNING Improper connection of the equipment grounding conductor is able to result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the product is properly grounded. DO NOT modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by a qualified electrician. · DO NOT overcharge the internal battery. See Instruction Manual. · DO NOT smoke, strike a match, or cause a spark in the vicinity of the power pack. · ONLY charge the internal battery in a well ventilated area. · Risk of Fire. This device contains energy higher than 1 kWh. DO NOT use in a sleeping room or any habitable space of a dwelling unit. · Ne pas surcharger la batterie interne. Consulter le manuel d'utilisation. · Il ne faut pas fumer, allumer une allumette ou produire des étincelles à proximité du bloc d'alimentation. · Charger la batterie uniquement dans un endroit bien aéré. · Risque de d'incendie. Cet appareil contient une énergie supérieure à 1 kWh. Ne pas utiliser dans une chambre à coucher ou tout espace habitable d'une unité d'habitation. DANGER This device is intended to be used indoors only. Do not use outdoors. Le dispositif est destiné à être utilisé à l'intérieur seulement. Ne pas l'utiliser à l'extérieur. Moving and Storage Instructions · The user can hold handles on both sides to move the product; · The product needs to be stored away from fire and humid environments. The ambient temperature should be 5°F-131°F (-15-55); the relative humidity 93% without condensation and the atmospheric pressure from 70kPa to 106kPa. SAVE THESE INSTRUCTIONS 3 b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 Technical Parameters User's Manual Item Nominal Power Peak Power Battery Parameters Product Size Product N.W. Ambient Temperature Range Transport and Storage Environment Parameter 2000 W 4KW LiFePO4 51.2V 54AH 20.75*13.27*12.40inch (527*337*315mm) 77.82LBS (35.3KG) 32°F-104°F (0 -40) Relative Humidity:80% Altitude2000M Temperature: 5°F-131°F (-15-55) Relative Humidity9 3%(No Condensation) Atmospheric Pressure: 70kPa106kPa PV Charging INPUT:10-60V 400W 400W Input Mains Charging 110-120V 60Hz 1500W V 60Hz 900W Output USB-A*Output USB-C*Output AC Output PV Charging Charging Time Mains Charging PD20W PD20W 4*American Standard three-hole Sockets 110V 60Hz About 8.9H 4.5H About 2H Note: The product is equipped with a bidirectional inverter.. Package Contents · Portable Power Station*1 · Product Manual*1 · Charging Cable*1 4 b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 User's Manual Product Use and Function Instruction Application and Function Introduction: The portable power station transforms LiFePO4 DC to AC pure sine wave by inverter. When the product is out of power or finished using, it can be charged by mains, without which this product can output AC to charge devices with corresponding power such as fridges, computers, and printers. With two handles on the left and right side, the product appears easy to move. Also, the 2-inch high-resolution LCD on the product displays battery power and charging status. What's more, the AC output sockets are installed with an overload protector. The product is equipped with protective functions like output overload, short circuits, and over-temperature. Product Main Structure Composition The portable power station is mainly composed of a metal shell, inverter, LCD display, and LiFePO4 battery. Panel Function Description Front Panel Output LCD Overload Screen Protector Power 5 GFCI Reset b82045fc-0b136962-90871f19-f891407c Left Side LiFe PO4 Portable Power Station 436989 User's Manual Cooling Window Handle Right Side USB Output AC Charging Input Socket PV Charging Input Socket Ground Post Cooling Window AC Output USB/AC Output Switch Handle Cooling Window 6 b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 Disaply Interface Description User's Manual Power Bar Power Percentage Operation and Usage 1. Steps for the First Start of Portable Power Station: 1) Check whether there is any visible damage to the appearance of the station and whether the output interfaces are loose or damaged (If abnormal conditions occur, stop using) 2) Fix the grounding post to the ground. 3) Press the "POWER" button on the front panel, and if the green light comes on, it indicates that the startup has been successful. Observe the screen to see whether the battery is fully charged. When the battery level is below 30%, it is recommended to fully charge it before use. 2. Charging Steps: 1) AC charging: First, confirm whether the mains grid voltage and frequency are within the range of mains charging input parameters of this product. Second, confirm that there is no load on the AC output socket, and plug one end of the AC charging cable in the accessory into the charging socket on the back of the power station, and the other one end into the mains power socket. Then, check whether the battery bar on the LCD is still bouncing (If bouncing, it means that the product is charging.) 7 b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 User's Manual Operation and Usage 2. Charging Steps: 2) Solar photovoltaic charging Please check the photovoltaic input voltage range before charging. After confirming that the positive and negative poles of the input interface correspond correctly to the positive and negative poles on the product socket, insert the input interface into the photovoltaic charging socket. Then, turn on the power switch on the front panel and check if the battery bar on the LCD is bouncing (If bouncing, it means that the product is charging). During the charging process, the power switch must be turned on, otherwise, the product cannot be charged (Ensure that there is sufficient sunlight when using photovoltaic charging). 3. AC Output On-load Usage AC on load: Before use, please check that the power range and voltage range of the onload electrical equipment should match the output parameters of the station. Insert the power plug of the loaded product into the output socket of the power station, and turn on the power switch. Then the loaded device would normally work. 4. USB Output On-load Usage Before using the power station, please check that the voltage and the corresponding parameter range of the on-load electrical device are consistent with the power station. Insert the interface of the on-load electrical device into the corresponding USB interface, and turn on the power switch. Then the loaded device would normally work. Product Maintenance 1. Newly products should be fully charged before use. 2. Regularly remove dust and dirt from the heat dissipation window. 3. In the case of long-term storage for more than three months, not less than 50% of the power storage shall be maintained. 4. If stored for more than 6 months, please charge and discharge the product 1-2 times. 8 b82045fc-0b136962-90871f19-f891407c LiFe PO4 Portable Power Station 436989 Common Troubleshooting User's Manual Issue Unable to Perform Mains Charging Suggested Action · If the mains input voltage range exceeds the parameter range of the power station, it cannot be charged. · Check whether the specifications of the charging cable are consistent with those equipped with this power station and check whether there is an open circuit. Unable to Perform AC Load · Check whether the power button is on. · Confirm whether the power of the load appliance is within the normal load range of the power station. USB/DC No-output After turning on the main · Check whether the power button is on; · Check whether the load connection line is on open circuit phenomenon. · Check if the output interface is fully inserted and firmly connected. In this case, it should be considered that the product power switch of the power battery may be out of power, the internal reverse station, the product controller cannot be started, and the battery enters a state cannot start normally and of power loss sleep. You can first access the mains to the display screen doesn't charge the product and activate it. When the battery is work fully charged, it can be used. Why does the output shut The product is set to turn off the output when the battery off when the battery is power is 10%. This is to protect the battery cell from over- discharged to 10%? discharge. When this situation occurs, the battery should be charged immediately. Unable to Perform Photovoltaic Charging · Check whether the voltage range and current of the photovoltaic panel are within the parameter range of the power station. · Make sure to use it in sufficient light. · Before PV charging, the POWER switch should be turned on so that the power station can be charged under the startup status. · Check whether the positive and negative poles of the photovoltaic panel connection line correspond to those on the product socket, and the plug and socket should match. · Check whether the photovoltaic panel connection line is broken or on open circuit phenomenon. 9