Bambu Lab P1S Combo 3D Printer User Manual
Model: BML-24026
Description: 3D printer - Bambu Lab P1S Combo
1. Usage Information and Warnings
- Do not touch the nozzle or heated bed during operation to avoid burns and bodily injury.
- Place the printer in a well-ventilated, cool, and dust-free area, away from heat sources or flammable materials.
- Avoid wearing gloves or wraps that could entangle with moving parts.
- Be aware of high-speed moving parts to prevent entrapment.
- Children under 10 should not use the printer without supervision.
- Perform regular maintenance using a dry cloth to clean the printer body. Ensure the printer is turned off and cooled before cleaning.
- Ensure the device is properly grounded to prevent electric leakage.
- Avoid sudden vibrations or adverse conditions that may affect print quality.
- If the device will not be used for an extended period, turn off the power and disconnect the power cord.
2. Unpacking and Assembly
The unpacking and assembly process involves:
- Unpacking: Checking the completeness and condition of all elements.
- Wiring: Connecting the device to the power supply.
- Startup and Calibration: Verifying the printer's operation and calibration.
- Test Print: Loading filament and performing a test print.
3. Intended Use
This product is intended for use within the manufacturer's specified parameter ranges and should only be operated by qualified and trained personnel. Before each use, inspect the product for any damage and do not use it if defects are found. Failure to adhere to the manufacturer's guidelines may result in product damage.
4. Technical Specification
| Specification | Details |
|---|---|
| Product Code | BML-24026 |
| EAN13 | 6975337033165 |
| Weight | 22.250000 kg |
| Dimensions | Width: 48 cm, Height: 59.5 cm, Depth: 49 cm |
| 3D - Print Surface | 256x256x256 mm |
| 3D - Type of Printout | FFF/FDM |
| 3D - Hotend Amount | 1 |
| 3D - Filament Diameter | 1.75 mm |
| 3D - Printing Speed | 500 mm/s |
| 3D - Nozzle Temp. | 300 °C |
| 3D - Table Temp. | 100 °C |
| Pole robocze (Working Area) | Średnie (Medium) |
| Wymiary pola roboczego - oś X (Working Area - X-axis) | 256 mm |
| Wymiary pola roboczego - oś Y (Working Area - Y-axis) | 256 mm |
| Wymiary pola roboczego - oś Z (Working Area - Z-axis) | 256 mm |
| Plug&Play | Tak (Yes) |
| 3D - Grzana komora (Heated Chamber) | Nie (No) |
| 3D - Kamera (Camera) | Tak (Yes) |
| 3D - Obsługa wielu materiałów (Multi-material Support) | Tak (Yes) |
| 3D - Obsługiwane materiały (Supported Materials) | Podstawowe (Basic) |
| 3D - Komunikacja (Communication) - WiFi | WiFi |
| 3D - Komunikacja (Communication) - microSD | Karta microSD (microSD Card) |
| 3D - Komunikacja (Communication) - Ethernet | Ethernet |
| 3D - Komunikacja (Communication) - Bluetooth | Bluetooth |
5. Contact Information
For product-related questions, please contact an authorized service center or the manufacturer:
- Importer: Botland. B. Derkacz Sp. K.
- Address: Gola 25, 63-640 Bralin
- Phone Number: 62 593 10 54
- Website address: www.botland.store
TCPDF
