CXY T18 1000A Portable Car Jump Starter

Product Overview

The CXY T18 is a 1000A multi-function portable car jump starter designed to provide emergency power for vehicles. It also serves as a power bank for charging various digital devices.

What's in the Box

• CXY T18 Jump Starter x 1
• Battery clamps with starter cable x1
• High quality USB-A to USB-C cable x1
• Jump starter carry case x1
• User manual x1

Friendly Tips

Please carefully read the instruction manual and use the product correctly based on the manual to become familiar with it more conveniently and quickly. Keep the user manual for future reference.

At a Glance

The CXY T18 jump starter is depicted with various ports and buttons. Key features are labeled with numbers:

• 1. Power Button: Located on the top surface.
• 2. Jump Button: Also on the top surface, adjacent to the power button.
• 3. Jumping Port: A dedicated port, likely for connecting the battery clamps, located on one side.
• 4. USB C Input (PD 18W): A USB Type-C port for charging the jump starter, supporting up to 18W Power Delivery.
• 5. USB Output (QC 3.0): A USB Type-A port supporting Quick Charge 3.0 for fast device charging.
• 6. USB Output (5V/2.4A): Another USB Type-A port for standard charging.
• 7. LED Light: Integrated into the top of the device, serving as a flashlight.

Specifications

How to Recharge the Jump Starter

There are two methods to recharge the jump starter:

1. Method 1: USB-C Charging

   Use a USB-C charger adapter and the provided USB-C cable to recharge the jump starter via the USB-C port. Support for PD 60W fast charging requires a 60W PD charger adapter.

2. Method 2: 5521 Connector Charging

   Use 5521 connector chargers (such as a 5521 DC car charger, 5521 laptop charger, or 5521 AC-to-DC adapter charger) to recharge the jump starter via the 5521 DC port.

Important Notes & Precautions

• This product is designed for vehicles with 12V batteries only. Do not attempt to jump start vehicles with a higher battery rating or different voltage.
• If the vehicle isn't started immediately, wait for 1 minute to allow the jump starter to cool down before the next attempt. Do not try to restart the vehicle after three consecutive attempts, as this may damage the unit. Check your vehicle for other possible reasons why it can't be restarted.
• If your vehicle battery is dead or its battery voltage is under 2V, the jump cable may not activate, and your vehicle will not start.

How to Jump Start a Car

1. Switch on your jump starter and ensure it's over 25% charged.
2. Insert the jumper cable into the jumping port.
3. Connect the red clamp to the positive (+) terminal and the black clamp to the negative (-) terminal of the car battery.
4. Press the Jump button for 3 seconds.

Display Screen Indicators:

• Orange "READY": Indicates the jump starter and clamps are in standby mode.
• Green "READY": Indicates everything is ready to start your car.
• "RC": Indicates the clamps and car battery poles are connected reversely. Please connect them correctly and try again.
• "LV": Indicates low voltage. Please recharge the jump starter and try again.
• "HT": Indicates the clamps have overheated. Please wait for several minutes to cool down, then try again.
• Flickering "188": Indicates the jump starter has overheated. Please wait for several minutes to cool down, then try again.

LED Flashlight

Long press the power button for 3 seconds to turn the flashlight on or off. Quick press the power button to switch between 3 flashlight modes: [light bulb] Lighting, [SOS signal] SOS, and [strobe light] Strobe light.

Charging Various Digital Devices

This product features 3 output ports for multiple charging demands:

• USB-C PORT: PD 18W MAX
• USB-A PORT: QC 3.0 MAX
• USB-A PORT: 5V/2.4A

General Precautions

• To preserve battery lifespan, use and recharge it at least once every 6 months.
• Use the standard jump cable provided to jump start your car.
• Do not recharge the jump starter immediately after starting your car.
• Avoid dropping the product.
• Do not heat the product or use it near fire.
• Do not put the product into water or disassemble it.