CSA Group Certificate of Compliance
Certificate: 80029681
Project: 80252884
Master Contract: 205078
Date Issued: 2025-06-09
Issued To:
Analog Devices Inc.
804 Woburn St
Wilmington, Massachusetts
01887-3462
United States
Attention: Jan Michael Elias Jimenez
Issued By:
Rekha Rajan
Rekha Rajan
Products Eligible for CSA Mark:
The products listed below are eligible to bear the CSA Mark shown with adjacent indicator ?
Products:
Class 9073 30 ELECTRONIC COMPONENTS - Optoisolators and non-optical isolating devices
Component Acceptance of Optoisolator Like Devices:
| Model(s) | Device LFCS 41 | Ratings (kV) | °C | Standard/Notice and Clauses | Internal Creepage (mm) | Dist Thru (mm) | External Creep/Clear (mm) |
|---|---|---|---|---|---|---|---|
| ADP1031ACPZ-1, ADP1031ACPZ-2, ADP1031ACPZ-3, ADP1031ACPZ-4, ADP1031ACPZ-5, ADP1032ACPZ-1, ADP1032ACPZ-2, ADP1032ACPZ-3, ADP1032ACPZ-4, ADP1032ACPZ-5, ADP1034ACPZ-1 | 2.5 | 125 | CSA 14-18, UPD1(R2022) tb35, 6.21.4.1, 6.2.1/6.2.12, 6.8.1 CSA 62368-1:19, UPD1:2021 5.4.3, 5.4.2, 5.4.4.4, 5.4.7, 5.4.8, 5.4.1.5.3, 5.4.9.1, 5.4.1.4 IEC 62368-1:2018 Ed. 3 3 5.4.3, 5.4.2, 5.4.4.4, 5.4.7, 5.4.8, 5.4.1.5.3, 5.4.9.1, 5.4.1.4 61010-1 3rd Ed+A1 6.7.1.3, 6.7.2.1 or tbK. 1 to K.4, 6.7.2.2.1, 6.7.2.2.2 or tbK.9, A.17, tbK.5x1.6, K.6x1.6, K.7x1.6, 10 60601-1:14 (R2022) +A1+A2 8.8.2, 8.8.3x1.6, 8.9.3.2, 8.9.3.4, 8.9.1.15, 8.9.1.7 EN 62368-1:2020+A11:2020 5.4.3, 5.4.2, 5.4.4.4, 5.4.7, 5.4.8, 5.4.1.5.3, 5.4.9.1, 5.4.1.4 | 2.15 |
Note: Suffix Z indicates the lead-free version. Suffix EP indicates lower extended temperature capability to -55°C with a NiPdAu lead finish. Further suffix letters or digits differentiate shipping package formats.
Notes:
- The devices meet basic insulation requirements for 215Vrms for CSA 62368-1-19, UPD1:2021, IEC 62368-1:2018 Ed. 3 and EN62368-1:2020+A11:2020 (pollution degree 2, material group III).
- For CSA 61010-1-12+A1 and IEC 61010-1 3rd Ed., the devices meet 150V for basic insulation based on 61010–1 Cl 14.1 a) for use in 61010-1 end products because they meet the requirements of the 62368-1 evaluation. The risk management process is not applicable to these clauses (pollution degree 2, material group III).
- For CSA 60601-1:14(R2022) and IEC60601-1 Ed.3+A1+A2 for 1 MOOP for 215Vrms, the devices meet clauses 8.8.2, 8.8.3x1.6, 8.9.3.2, 8.9.3.3, 8.9.3.4, 8.9.1.14, 8.9.1.7. The risk management process is not applicable to these clauses.
- Case material: material group II.
- Evaluated by thermal cycling and other tests for a temperature rating of 125°C.
- The creepage and clearance has been evaluated for altitudes ≤ 2000m, in pollution degree 2 and overvoltage category II except where specified above (pollution degree 2, material group III).
Applicable Requirements:
- CSA C22.2 No. 14-18 - Thirteenth Edition - Including Update No. 1: June 2022 - Industrial control equipment
- CSA C22.2 No. 62368-1:19 - Third Edition - Audio/video, information and communication technology equipment - Part 1: Safety requirements - Including Update No 1 - October 2021
- CSA C22.2 No. 61010-1-12, UPD1:2015, UPD2:2016, AMD1:2018 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
- CAN/CSA-C22.2 60601–1:14 (R2022) - Medical Electrical Equipment - Part 1: General Requirements for Basic Safety and Essential Performance (Adopted IEC 60601-1:2005, third edition + Amendment 1:2012)
- IEC 62368-1:2018 - Audio/video, information and communication technology equipment - Part 1: Safety requirements - Edition 3.0
- IEC 61010-1:2010, IEC 61010-1:2010/AMD1:2016 - Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
- IEC 60601-1:2005/AMD1:2012/AMD2:2020 – Medical electrical equipment - Part 1: General requirements for basic safety and essential performance - Edition 3.2; Consolidated Reprint; Incorporates Amendment 1: 2012, Corrigenda 1: 12/2012, Corrigenda to Amendment 1: 07/2014, Interpretation 1: 04/2008, Interpretation 2: 01/2009, and Interpretation 3: 05/2013 and Amendment 2: 08/2020
- EN 62368-1:2020/A11:2020 - Audio/video, information and communication technology equipment Part 1: Safety requirements - Incorporates Amendment A1:2020
Component Acceptance:
These devices are Component Accepted as components for use in other Certified equipment where the suitability of the combination shall be determined by investigation in the final application.
Certification Mark:
Products certified under Class(es) C907330 have been certified under CSA's ISO/IEC 17065 accreditation with the Standards Council of Canada (SCC). www.scc.ca
