Installation Guide for VERSATRAX models including: L Series Track Tie Down Anchor Rails, L Series, Track Tie Down Anchor Rails, Tie Down Anchor Rails, Down Anchor Rails, Anchor Rails, Rails

VersaTrax – OneTrax QuickConnect Bed Anchor

Nicholas Chase

L-Track Rail Anchors

Install Instructions – VersaTrax

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 498.61KB

Document Document

L-Series Track Tie-Down Anchor Rails Install Instructions
Parts Included: (2) or (4) L-Series Track Anchor Rails (option dependent) (4) or (8) L-Series Single Stud L-Series Anchor Fittings (4) RailTrax Bolts (Tundra only) (1) TP50 (Torx Plus 50) 3/8" Drive (Tundra only)
Step 1: Remove the OEM bed bolts utilizing a T55 (Torx 55) drive (see photo 1).
Note: OEM bed bolts that are covered in bed liner will need to be cut around the flange/washer to remove. Rest assured, the tracks will cover the exposed bed when installed.
Step 2: Position each rail between the bed bolt holes. (see photo 2).
Step 3: Install the bolts through each slot on the rails and secure directly to the frame of the vehicle.
Step 4: Torque each bolt to 50 ft/lb.
Note: Parts/positions being referenced are highlighted in blue in the photos.

Photo 1 Photo 2